Commit graph

287,481 commits

Author SHA1 Message Date
Markus Pargmann
67921a1a66 regmap: Split use_single_rw internally into use_single_read/write
use_single_rw currently reflects the capabilities of the connected
device. The capabilities of the bus are currently missing for this
variable.

As there are read only and write only buses we need seperate values for
use_single_rw to also reflect tha capabilities of the bus.

This patch splits use_single_rw into use_single_read and
use_single_write. The initialization is changed to check the
configuration for use_single_rw and to check the capabilities of the
used bus.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-21 09:33:10 -07:00
Dan Carpenter
9c8f55798a Input: sentelic - silence some underflow warnings
I have a static checker that complains when we check for an upper bound
but don't have a corresponding check for a lower bound.  With this code,
the upper bound check seems not really required, so it is not a bug to
leave the lower bound check out as well.  But let's silence the warning
by making these variables unsigned.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-21 09:32:59 -07:00
Markus Pargmann
c594b7f21d regmap: Fix regmap_bulk_write for bus writes
The regmap config does not prohibit val_bytes that are not powers of
two. But the current code of regmap_bulk_write for use_single_rw does
limit the possible val_bytes to 1, 2 and 4.

This patch fixes the behaviour to allow bus writes with non-standard
val_bytes sizes.

Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-21 09:32:54 -07:00
Marek Szyprowski
ee3010d0ab regulators: max77693: register driver earlier to avoid deferred probe
MAX77693 based regulators are used by USB gadget subsystem, which
doesn't support deferred probe, so the driver should be registered
before USB gadget drivers get probed.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-21 09:07:45 -07:00
Pali Rohár
b68c316143 bq2415x_charger: Allow to load and use driver even if notify device is not registered yet
Driver bq2415x_charger works also without notify power supply device for
charger detection. But when charger detection is specified in DT, then
bq2415x_charger refused to loaded with -EPROBE_DEFER.

This patch rewrites code so that notify device for charger detection is
checked when power supply event is received and not when registering power
supply device. So this patch allows to use bq2415x_charger driver also when
kernel is compiled without driver for notify power supply device.

Now after this patch scheduled workqueue is called after INIT_DELAYED_WORK,
so it also fix problem when scheduled workqueue was called before init.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-08-21 16:46:38 +02:00
Rameshwar Prasad Sahu
005ce70b94 dmaengine: xgene-dma: Fix the lock to allow client for further submission of requests
This patch provides the fix in the cleanup routing such that client can perform
further submission by releasing the lock before calling client's callback function.

Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-21 15:48:37 +05:30
Dave Airlie
7f98ca454a drm/radeon: fix hotplug race at startup
We apparantly get a hotplug irq before we've initialised
modesetting,

[drm] Loading R100 Microcode
BUG: unable to handle kernel NULL pointer dereference at   (null)
IP: [<c125f56f>] __mutex_lock_slowpath+0x23/0x91
*pde = 00000000
Oops: 0002 [#1]
Modules linked in: radeon(+) drm_kms_helper ttm drm i2c_algo_bit backlight pcspkr psmouse evdev sr_mod input_leds led_class cdrom sg parport_pc parport floppy intel_agp intel_gtt lpc_ich acpi_cpufreq processor button mfd_core agpgart uhci_hcd ehci_hcd rng_core snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm usbcore usb_common i2c_i801 i2c_core snd_timer snd soundcore thermal_sys
CPU: 0 PID: 15 Comm: kworker/0:1 Not tainted 4.2.0-rc7-00015-gbf67402 #111
Hardware name: MicroLink                               /D850MV                         , BIOS MV85010A.86A.0067.P24.0304081124 04/08/2003
Workqueue: events radeon_hotplug_work_func [radeon]
task: f6ca5900 ti: f6d3e000 task.ti: f6d3e000
EIP: 0060:[<c125f56f>] EFLAGS: 00010282 CPU: 0
EIP is at __mutex_lock_slowpath+0x23/0x91
EAX: 00000000 EBX: f5e900fc ECX: 00000000 EDX: fffffffe
ESI: f6ca5900 EDI: f5e90100 EBP: f5e90000 ESP: f6d3ff0c
 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
CR0: 8005003b CR2: 00000000 CR3: 36f61000 CR4: 000006d0
Stack:
 f5e90100 00000000 c103c4c1 f6d2a5a0 f5e900fc f6df394c c125f162 f8b0faca
 f6d2a5a0 c138ca00 f6df394c f7395600 c1034741 00d40000 00000000 f6d2a5a0
 c138ca00 f6d2a5b8 c138ca10 c1034b58 00000001 f6d40000 f6ca5900 f6d0c940
Call Trace:
 [<c103c4c1>] ? dequeue_task_fair+0xa4/0xb7
 [<c125f162>] ? mutex_lock+0x9/0xa
 [<f8b0faca>] ? radeon_hotplug_work_func+0x17/0x57 [radeon]
 [<c1034741>] ? process_one_work+0xfc/0x194
 [<c1034b58>] ? worker_thread+0x18d/0x218
 [<c10349cb>] ? rescuer_thread+0x1d5/0x1d5
 [<c103742a>] ? kthread+0x7b/0x80
 [<c12601c0>] ? ret_from_kernel_thread+0x20/0x30
 [<c10373af>] ? init_completion+0x18/0x18
Code: 42 08 e8 8e a6 dd ff c3 57 56 53 83 ec 0c 8b 35 48 f7 37 c1 8b 10 4a 74 1a 89 c3 8d 78 04 8b 40 08 89 63

Reported-and-Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-08-21 19:43:18 +10:00
Dave Jiang
64f1d0ffba dmaengine: ioatdma: fix coccinelle warning
Simplifying the end return. This existed in the original code but was
flagged when refactoring of the code made it appear it's new.

coccinelle warnings: (new ones prefixed by >>)

>> drivers/dma/ioat/init.c:1018:1-3: WARNING: end returns can be simpified

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-21 14:04:24 +05:30
Dave Jiang
aaecdebc58 dmaengine: ioatdma: fix zero day warning on incompatible pointer type
The 32bit build is creating this warning. Since we don't expect anyone
actually use this on 32bit, restrict ioatdma to be built only on x86_64.
This issue has long existed and only reason it's surfacing due to code
refactoring.

   drivers/dma/ioat/dma.c: In function 'ioat_timer_event':
>> drivers/dma/ioat/dma.c:870:39: warning: passing argument 2 of 'ioat_cleanup_preamble' from incompatible pointer type
     if (ioat_cleanup_preamble(ioat_chan, &phys_complete))
                                          ^
   drivers/dma/ioat/dma.c:577:13: note: expected 'u64 *' but argument is of type 'dma_addr_t *'
    static bool ioat_cleanup_preamble(struct ioatdma_chan *ioat_chan,
                ^

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-21 14:04:24 +05:30
Thomas Hellstrom
36d4e87b49 drm/vmwgfx: Remove duplicate ttm_bo_device_release
No need to try to call ttm_bo_device_release twice during module unload.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2015-08-21 00:38:23 -07:00
Thomas Hellstrom
772269f970 drm/vmwgfx: Fix a circular locking dependency in the fbdev code
When a user-space process writes directly to the fbdev framebuffer,
we hit a circular locking dependency. Fix this by introducing a local
delayed work callback so that the defio lock can be released before
calling into the modesetting code for a dirty update.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2015-08-21 00:37:46 -07:00
Krzysztof Kozlowski
b06ece93cf video: fbdev: s3c-fb: Constify platform_device_id
The platform_device_id is not modified by the driver and core uses it as
const.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-08-21 08:56:19 +03:00
Dave Airlie
44790462d0 drm/dp/mst: dump branch OUI in debugfs (v2)
It appears some MST docks are worse than other, but the only
way to know is to see the sw revisions in here, so dump
the branch OUI so we can look at the sw revision.

v2: Thierry made me feel guilty, so I parsed the branch
OUI.

Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-08-21 12:04:49 +10:00
Olof Johansson
21815b9a24 ARM: tegra: Memory controller updates for v4.3-rc1
Adds support for Tegra210, which allows the SMMU to be used on this new
 SoC generation.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVzfK2AAoJEN0jrNd/PrOhR2cP/RYqGcXQMbHPnDY4Za7dXtGW
 nG+NFNLBdVsyPk7ol9p1WRNKVkWSObJ4RN669CyRbk6JvBf7xYXSp9i0mh7FSMow
 WBCk3sraN8L8txXOYMnut2+b/3xNGrVxgh8RmQ4aRZY+UDMXlX+cAyuEBhGTDR1G
 N0KhIO3SYDGRMCJ6w3sV0lT+Ac0I5+iG94kRxoqyaO/mi/EA3I3rOaYaiHujCQxJ
 1LrQAY35NTC0Pwsdqq7ivPEHkL9Ki4/rvPnVocZea4H+MSZ/gTSHpe7rPOF4vGPS
 imERpyN4eJwZlQnOC8ism3TQPHGiKux8xEtNBV76IHmB27O7A+cJhQWFzdKGQpGB
 tMcqyr5aJGFwJ2Rba0NKo61xyIqXgE4pW85DKAuN6cnWlZ5+J8Mjv5788tMShwMI
 aMPm3na6gtiH2zhkE0MEt0qizDM9BUnlF3be5gVQejr4jNDOFe62opvyzq42iO2z
 8NQ9amgMQXfwql7Wr6T+Fa5VgTPRS2VEjf7knJaYFXVih5nP5SGK6fvkLIb2MN07
 DKZ5rbrXBxx4kpZiftnE1wPwQC6EHg5FT+4MDW877Lw1dbDllM179cOgRJowLo0G
 zkPOvHKiQFLx/32MZJfXp5vbDeX11Q2LOgNc+/D46dSm7ElnuEXylnc4vOuvFDU9
 AkuPLVT4wos1SsvtL8v6
 =H73u
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.3-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

ARM: tegra: Memory controller updates for v4.3-rc1

Adds support for Tegra210, which allows the SMMU to be used on this new
SoC generation.

* tag 'tegra-for-4.3-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  memory: tegra: Add Tegra210 support
  memory: tegra: Add support for a variable-size client ID bitfield
  memory: tegra: Expose supported rates via debugfs

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-20 18:50:17 -07:00
Olof Johansson
420f2629fa ARM: tegra: CPU frequency scaling for v4.3-rc1
This adds CPU frequency scaling support for Tegra124.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVzfGWAAoJEN0jrNd/PrOhHAkQAJZdh0UBT+El2iBdfpNYKOOT
 qwr22GBNN5lKcOoWm03te8VeTsZxVZ3TJTXp2BRfDRm8gGTufXH267dCLckfgcZd
 VdYIMQ4Eh18m2SZK2mPksaZvh9qrsGsOdeL4CY6rPmXYGbTU1EWWXQ02tnNfV2sw
 BD2G+X14KsNmIGCmoPC5SeRsg8tBpkFxQqzz1/R4NLOMMpPJ/xkAo7K1JVU8+bYo
 O1e6lUEIIyj/cBpdF0u0bSPiSmJO5HY6O5XKU4VyjWm+V0Tz2BKRcWJozft/y+yH
 j3RSvM5uhVSQTfpQqwjUWFr8kgsooLQhVqaaT0NSS/whFN8fCbs+yT5GHKNrymFD
 Z6qkEmQdUM6vhf7IgKv0cSBVLwqQ+q8zPiOxFBFZ6boJpzroEds+y4+nGJVikFn9
 3Uzy1j7M0xjH9/Qsi5+qz0efvfpp5DAAEnxJycC/1nLbi5yd11rRY/bMchtNkqDC
 39zy63cwhM8ls2/6OT1eknS/4OSjMURuX192KY480biujwQpVEBrcgv+3VIK3iLr
 XnccvMzO4GHUA0TzvnHGG9I2uauO/t6d2sPGGCJZbASVJ8ZpG1sxSgO6Nq7/nDbs
 NFpsIN9+zMhAOvZV8b0/Ed3Ehzh1ZGrb8gkZ3MVjdGjg+OT1kmaAHtjCRHpBJwxe
 O0mU6V3E3QcMI0PPuoU1
 =TghG
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.3-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

ARM: tegra: CPU frequency scaling for v4.3-rc1

This adds CPU frequency scaling support for Tegra124.

* tag 'tegra-for-4.3-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  cpufreq: Add cpufreq driver for Tegra124
  cpufreq: tegra: Rename tegra-cpufreq to tegra20-cpufreq
  cpufreq: tegra124: Add device tree bindings

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-20 18:47:04 -07:00
Olof Johansson
5378e4665f ARM: tegra: Core SoC changes for v4.3-rc1
This contains a bit more of Tegra210 support, which is shaping up pretty
 nicely. Other than that there are a couple of cleanup patches here, too.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVzfFHAAoJEN0jrNd/PrOhvF0QAK6TZ/mSuK5sWsF2LWY/yCk1
 sbS5NpOkP0Js+39CZFfRJXOeAlopyeA8UEAnmobyUIprYQWoK0iE4y0q+Iy6nn72
 tZdsZlz87dUM/CYjT+AyPK7aUILB1s3dLjul+Lua5mAhUCwju+HHdHgm6OI5c/GN
 4W5T3ysfF7aDy+o8a85YLPaPwhP36yTy6x3cx9lLvmFIKVgwWIn+cuOJOpaziy3W
 frh7v26Vjl5Ja8Ml1LZd5TQhWJBzsSAIr81PJnk8nNliKspASw6a+hWvTkd2vMll
 4qN9sekg55xeGk9lDJeesOmc2dmE4m1r0kg1aVcnpno/oy1k3VicHXfrI/AoN96w
 cwRPHwAny9V5wW9vR5WojyGEuGojr/tbHVPGVMAhv+nw1Vod2A9iO5yNJyOs5a96
 G6+YZNWwKJRecvQu+3SbhKKjSJoe66Ac36qTlTYjCiwVdcBceBMiqHl4sEslxLd9
 pzrI6xjBlyqBcxdBeunKi6CoSeXRVv8HqO7lKLSBDMeMJQD3utYBhGgR59B0sI6P
 sSyzPmPpv91YuXXJ2xhtRkFmBrW3KmN9ot8JgsfmzCxgef3zUa6vxOVrSGIbmWGB
 qzB4V0X8GOVoZNejFLx+LGLHXeW6wdOJ3n6vqvZjaFTTeYz9kDm9Y3EUBXxX6hzs
 ULBUWV18Nh/YDUIZIaV8
 =xo46
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.3-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

ARM: tegra: Core SoC changes for v4.3-rc1

This contains a bit more of Tegra210 support, which is shaping up pretty
nicely. Other than that there are a couple of cleanup patches here, too.

* tag 'tegra-for-4.3-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: cpuidle: implement cpuidle_state.enter_freeze()
  ARM: tegra: Disable cpuidle if PSCI is available
  soc/tegra: pmc: Use existing pclk reference
  soc/tegra: pmc: Remove unnecessary return statement
  soc: tegra: Remove redundant $(CONFIG_ARCH_TEGRA) in Makefile
  soc/tegra: fuse: Add spare bit offset for Tegra210
  soc/tegra: fuse: Add spare bit offset for Tegra124
  soc/tegra: fuse: Add spare bit offset for Tegra114
  soc/tegra: fuse: Rename core_* to soc_*
  soc/tegra: fuse: Add Tegra210 support
  soc/tegra: fuse: Unify Tegra20 and Tegra30 drivers
  soc/tegra: fuse: Restrict legacy code to 32-bit ARM
  soc/tegra: pmc: Add Tegra210 support
  soc/tegra: pmc: Restrict legacy code to 32-bit ARM
  soc/tegra: pmc: Avoid usage of uninitialized variable
  soc/tegra: Add Tegra210 support
  soc/tegra: Add Tegra132 support

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-20 18:43:15 -07:00
Olof Johansson
deb14362a5 Samsung cpufreq driver updates for v4.3
- remove exynos4 SoCs and exynos5250 specific cpufreq driver support
   and unselectable rule for arm-exynos-cpufreq.o because of supporting
   generic cpufreq driver for the exynos SoCs
 
 * Note this is depending on tags/samsung-clk-driver, tags/samsung-soc
   and tags/samsung-late-dt
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJVzOBxAAoJEA0Cl+kVi2xq0N4P/2PhL646YQWMUfGIl6PRZhMX
 Ju5VfxvCniM8+8ya5gMKANDZcq118R4KSn0NOUrCIFt0tJVdLgDcuxIzgIvXd4EN
 zmncOTXFJZRplvAoy2EY4vNoCyTg03ogSiQkjaD/ZpfCkpjRNZwiUmIilATFEiBp
 fbAB7Lm8cNmxm0UiWTUAMyIzI7b0olvKzY+kPXfKRfIJ/1HPXy63zmfHpzfDmvSQ
 RNmbqKFaXW96jt6lQyPyR70kPDKAzP3atyx5io6I1KZjsB86JbSQAdQ/9nGKe0ij
 4+BDNSoKcSSubgpA3pfr8Aotu876e0yJ1hdbkEPEs8lvOp3sNgPAMAXPd2ZfY8Jw
 Uc+VxWi+ZyGqP6/dsQS1pGxx+aW93a0xtQ7+JVsfNsB84JQpinZ2LKTCNEPL8/5z
 G8IX2mAMSRI7hHvzpAkxmSybPlI1h6gpHG8qnIB+vpJJAgIDspG+iO8z1I1XAQSK
 dFPRa1PlzeDBTVMHQHdIE6UKiKY2UGqztrnmEgVRriV/c5FICPxUfAKBrxoGI4/4
 Xcjhxdv+PoJTmpEyshjxkRe2Ehjl2ypM3AgF9IHEQ+g7CgcEblpsYfAVsY6waQuY
 6KKaV1+iiJ+cVvWIDSXEZFUl6nJxpFCXpwz9xhWWSm64UAMKY5qjeMij5znX/Kb4
 SOB77brJudjg71Luf4Io
 =myzK
 -----END PGP SIGNATURE-----

Merge tag 'samsung-late-cpufreq-driver' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/late

Samsung cpufreq driver updates for v4.3

- remove exynos4 SoCs and exynos5250 specific cpufreq driver support
  and unselectable rule for arm-exynos-cpufreq.o because of supporting
  generic cpufreq driver for the exynos SoCs

* Note this is depending on tags/samsung-clk-driver, tags/samsung-soc
  and tags/samsung-late-dt

* tag 'samsung-late-cpufreq-driver' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  cpufreq: exynos: Remove unselectable rule for arm-exynos-cpufreq.o
  cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support
  cpufreq: exynos: remove exynos5250 specific cpufreq driver support

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-20 18:38:39 -07:00
Olof Johansson
6b0770582d Samsung clk driver updates for v4.3
- add cpu clock configuration data and instantiate cpu clock
   for exynos3250, 4210, 4412 and 5250 SoCs to support Samsung
   specific cpu-clock type
 
 * Note this branch has been provided to clk tree as a topic branch
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIbBAABAgAGBQJVzN8oAAoJEA0Cl+kVi2xqV8cP9Rv2PhHGA9HE+bNMWeB3FqkE
 +CfGPhjhwLOzWdfYCaKCWiTYtABU9X0TBmfWEPsmB0sDCfFcbkaeEkNiGHnxIEfr
 XCoE/zGg7Wr49PxuNvBsr3YoysA+2B0hchito1GT5qZts35NZdjo79KbTfLxRuC4
 E8XPmpNwWpy9QXVIbo8x0v1IRRUJFe/EssL2HMhpJi1LLxqen4wkAQX7C1Kt4RfP
 4OvqSMIz/YgbX7Xvqkk8JfILTYgGVgobUMy7RlJdWh49Pqv0SbSP+lICkXZ6tZAR
 Pbd6urv6E1H5Su7JwxUHtVpJQ//ycdYKsZ5HLTurczBU0XWZ5RdcN+7TDyk8NdjX
 B1hWF1Ahummt6imuqGEm8DZjRZ9rGmCnQBV8NrXYXDvRLskyTOF+sUYp6obXf9hr
 xr2HXYK+qdKuVc88QFrCS0K/ElXTXHRjeQR1aD8ennC9/BcnHNRgYvuikv/Oet91
 HcwHRed0761J4dt1TRFs4C8rIYho5TEEmecx9Ewu6xh6Pod7H/g39y5xESoVuiL6
 UZNBvtcgUqbGz6UOoZd8MTilIyPFY2QuWUiRGH+ydsItM3GoQZa2t0kI3xwOQwD+
 56AfEqKGJj8Ei+zPwLnTBrT4cPPglRgwX6PAnONAwO1XadyE8q2zRycI3Y5tDP+4
 VnI4Q7zDKw9NAZdtMqk=
 =AWdl
 -----END PGP SIGNATURE-----

Merge tag 'samsung-clk-driver' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/late

Samsung clk driver updates for v4.3

- add cpu clock configuration data and instantiate cpu clock
  for exynos3250, 4210, 4412 and 5250 SoCs to support Samsung
  specific cpu-clock type

* Note this branch has been provided to clk tree as a topic branch

* tag 'samsung-clk-driver' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  clk: exynos4x12: add cpu clock configuration data and instantiate cpu clock
  clk: exynos3250: Add cpu clock configuration data and instaniate cpu clock
  clk: exynos5250: add cpu clock configuration data and instantiate cpu clock

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-20 18:35:02 -07:00
Olof Johansson
bd90f11589 Reset controller changes for v4.3
- moved the DT reset binding includes from
   include/dt-bindings/reset-controller to include/dt-bindings/reset
 - new driver for LPC18xx Reset Generation Unit (RGU)
 - of_device_id array in the STi driver changed to const.
 - extend SoCFPGA reset driver to support Arria10
 - new ath79 reset controller driver for AR71XX/AR9XXX
 - new driver for Xilinx Zynq reset controller
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV0Km0AAoJEFDCiBxwnmDrOUgQAMkd/AF+Kl2cLpU0am/7yDZE
 eO4UgnlQ50L3+bXjOdgX0Ge24S6yQRpe66Nj1vpK0lfxzPM+K2/sTfXso0iAhtGd
 7OqapeQv+/hlBq2mmPT1smEbDucOFffFmQAq9sV3PbAYgGRn2CD8GYvSoS//0EMm
 39KbocTEsuZErf0hmNlhtIwa6vg+Q9H1eWN0A3CZrGOy3zMMGEypyKOyJznIpBZv
 HccpVN4y3D3BTf2HIWa5p9dHueWv5BdmudM2IypO3EVXOULhu4Jzqt1Fizu9F+yR
 jvxbB96W8gNDRT5c49vFshkVWfNJAkYnKcXISjWUb0bM9V1l5V62R8f4OJWj24rh
 GXgT8spdqjze38YYT8VQx7SWXjm6H2aMnrYNMLQsHunJbEbboqCb/JHTTCOrzMSZ
 FgHWCp0uodNYo/VGWx8GgMKPwrfYpY8iMtm16WSucPZA/ppx21oD8VLzIY1Bd0CW
 JM5oHG4uYB90EFxQS5XJoAxa9HbIlV6UbHdt44bVPcaQGw9ID+j978Djsjalqqf7
 uhA+8wVYGcopOcUWJ8ISsMerQqCiJfMwczhwDh0yEd9NshGv76NbycgsVP/4De6f
 c8xCEkuADYtWPtaQQakU+l8TfctmrsakNmD5DbkUgoLut+FnkfN1cmHHGnFlI36d
 DTaKtOAddWkrWebdpXW1
 =GBec
 -----END PGP SIGNATURE-----

Merge tag 'reset-for-4.3' of git://git.pengutronix.de/git/pza/linux into next/drivers

Reset controller changes for v4.3

- moved the DT reset binding includes from
  include/dt-bindings/reset-controller to include/dt-bindings/reset
- new driver for LPC18xx Reset Generation Unit (RGU)
- of_device_id array in the STi driver changed to const.
- extend SoCFPGA reset driver to support Arria10
- new ath79 reset controller driver for AR71XX/AR9XXX
- new driver for Xilinx Zynq reset controller

* tag 'reset-for-4.3' of git://git.pengutronix.de/git/pza/linux:
  reset: reset-zynq: Adding support for Xilinx Zynq reset controller.
  docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.
  MIPS: ath79: Add the reset controller to the AR9132 dtsi
  reset: Add a driver for the reset controller on the AR71XX/AR9XXX
  devicetree: Add bindings for the ATH79 reset controller
  reset: socfpga: Update reset-socfpga to read the altr,modrst-offset property
  doc: dt: add documentation for lpc1850-rgu reset driver
  reset: add driver for lpc18xx rgu
  reset: sti: constify of_device_id array
  ARM: STi: DT: Move reset controller constants into common location
  MAINTAINERS: add include/dt-bindings/reset path to reset controller entry

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-20 18:30:09 -07:00
Yalin Wang
012bd2a533 Input: zhenhua - switch to using bitrev8()
Instead of custom zhenhua_bitreverse() let's use generic bitrev8().

Signed-off-by: Yalin Wang <yalin.wang2010@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-20 17:44:34 -07:00
Dave Airlie
bef7d1961c Merge tag 'drm-intel-fixes-2015-08-20' of git://anongit.freedesktop.org/drm-intel into drm-fixes
Revert of a VBT parsing commit that should've been queued for drm-next,
not v4.2. The revert unbreaks Braswell among other things.

Also on Braswell removal of DP HBR2/TP3 and intermediate eDP frequency
support. The code was optimistically added based on incorrect
documentation; the platform does not support them. These are cc: stable.

Finally a gpu state fix from Chris, also cc: stable.

* tag 'drm-intel-fixes-2015-08-20' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Avoid TP3 on CHV
  drm/i915: remove HBR2 from chv supported list
  Revert "drm/i915: Add eDP intermediate frequencies for CHV"
  Revert "drm/i915: Allow parsing of variable size child device entries from VBT"
  drm/i915: Flag the execlists context object as dirty after every use
2015-08-21 10:44:03 +10:00
Linus Torvalds
0bad90985d Power management and ACPI fixes for v4.2-rc8
- Fix a recently introduced issue in the ACPI backlight code which
    causes lockdep to complain about a circular lock dependency during
    initialization (Hans de Goede).
 
  - Fix a possible memory during initialization in the Exynos cpufreq
    driver (Shailendra Verma).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJV1lUAAAoJEILEb/54YlRxLcsQAK/pVtaXe07xY0WnknKQp5cr
 HqOKZKQ5Eq+1eAI8CoT27F5/DMBTCOga04arSlQo+NG+uWA+vEAXdLN0JtgqTwmU
 0C9KaTCI7vs0estYeHhz3h1+CNkP2iEG78JxlnZRuZo0plBbYtv8VPh0/gfseC/g
 BlTMM3KuSfIbUK1pWAVz8gTOJqJ/kPTTaTRjzy9/+HnQWcomz1kQnlqEjxxNK/BS
 moFi5ka+LiLvzfSc4OLjxHAL3O3pUVIKEOUv8Pkomx+Js4+9TYzLmBqjUCUN0kSJ
 y6VKqjDq4MeujPfW35PVkb3eFwILVik+8IUwQoymKobenb1lQyeGPrNvr9cCswAd
 WtBUvD/LIOdplrlFDQCeWEfb53SIr+5pOBDY4Pb+wrplg/HukmBLfORYYqtNWftM
 6Dx7mjxUoz7BddRciqTYiEgBzTE+oDgUPrQkX3ot2xXv6jbBPazzzc1EEh/25rZ1
 SYezK1JxS8xa5ctGUEy4ppgXqqNjXNotb4sQnhYSsuFjMNzs4eIj5Pp204Ohkd/S
 TJfzTD45FE6CQwkp0Yvh3/VRScUiC1xxLy/1uJvv9ZKZNpVQEJcaoPeF+DOMKFjf
 gFNToHr7SlhJq4Ad2dTzwFd64BA0c3Dg4MX1/jUSkZMRPRaIjINNQ4ftJ/yLfMsA
 rnYsGj+7Xntbfm9X/bu6
 =s0Ql
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI fixes from Rafael Wysocki:
 "These fix a recent regression in the ACPI backlight code and a memory
  leak in the Exynos cpufreq driver.

  Specifics:

   - Fix a recently introduced issue in the ACPI backlight code which
     causes lockdep to complain about a circular lock dependency during
     initialization (Hans de Goede).

   - Fix a possible memory during initialization in the Exynos cpufreq
     driver (Shailendra Verma)"

* tag 'pm+acpi-4.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: exynos: Fix for memory leak in case SoC name does not match
  ACPI / video: Fix circular lock dependency issue in the video-detect code
2015-08-20 17:06:11 -07:00
Jiri Benc
a725e514db vxlan: metadata based tunneling for IPv6
Support metadata based (formerly flow based) tunneling also for IPv6.
This complements commit ee122c79d4 ("vxlan: Flow based tunneling").

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 15:42:37 -07:00
Jiri Benc
6f264e47d4 vxlan: do not shadow flags variable
The 'flags' variable is already defined in the outer scope.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 15:42:37 -07:00
Jiri Benc
705cc62f67 vxlan: provide access function for vxlan socket address family
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 15:42:37 -07:00
Jiri Benc
61adedf3e3 route: move lwtunnel state to dst_entry
Currently, the lwtunnel state resides in per-protocol data. This is
a problem if we encapsulate ipv6 traffic in an ipv4 tunnel (or vice versa).
The xmit function of the tunnel does not know whether the packet has been
routed to it by ipv4 or ipv6, yet it needs the lwtstate data. Moving the
lwtstate data to dst_entry makes such inter-protocol tunneling possible.

As a bonus, this brings a nice diffstat.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 15:42:36 -07:00
Jiri Benc
7c383fb225 ip_tunnels: use tos and ttl fields also for IPv6
Rename the ipv4_tos and ipv4_ttl fields to just 'tos' and 'ttl', as they'll
be used with IPv6 tunnels, too.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 15:42:36 -07:00
Jiri Benc
c1ea5d672a ip_tunnels: add IPv6 addresses to ip_tunnel_key
Add the IPv6 addresses as an union with IPv4 ones. When using IPv4, the
newly introduced padding after the IPv4 addresses needs to be zeroed out.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 15:42:36 -07:00
Rafael J. Wysocki
b8a1171f71 Merge branches 'acpi-video' and 'cpufreq-fixes'
* acpi-video:
  ACPI / video: Fix circular lock dependency issue in the video-detect code

* cpufreq-fixes:
  cpufreq: exynos: Fix for memory leak in case SoC name does not match
2015-08-21 00:19:29 +02:00
Bjorn Helgaas
45ea2a5fed PCI: Don't use 64-bit bus addresses on PA-RISC
Meelis and Helge reported that 3a9ad0b4fd ("PCI: Add pci_bus_addr_t")
caused HPMCs on A500 and hangs on rp5470.

PA-RISC does not set ARCH_DMA_ADDR_T_64BIT, even for 64-bit kernels, so
prior to 3a9ad0b4fd, we always used 32-bit PCI addresses.  After
3a9ad0b4fd, we do use 64-bit PCI addresses in 64-bit kernels, and
apparently there's some PA-RISC problem related to them.

Fixes: 3a9ad0b4fd ("PCI: Add pci_bus_addr_t")
Link: http://lkml.kernel.org/r/alpine.LRH.2.11.1507260929000.30065@math.ut.ee
Reported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Based-on-idea-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
CC: stable@vger.kernel.org	# v3.19+
2015-08-20 17:16:37 -05:00
Jeremy Linton
938049e18d net: xgene Remove xgene specific phy and MAC lookup functions
Convert the xgene_get_mac_address to device_get_mac_address(), and
xgene_get_phy_mode() to device_get_phy_mode().

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 14:43:49 -07:00
Jeremy Linton
4d14a63400 smsc911x: Remove dev==NULL check.
The dev==NULL check in smsc911x_probe_config is useless
and isn't providing any additional protection. If a fwnode
doesn't exist then an appropriate error should be returned
by device_get_phy_mode() covering the original case
of a missing of/fwnode.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 14:36:25 -07:00
Jeremy Linton
2f710a3a80 device property: Add ETH_ALEN check, update comments.
This patch adds MAC address length check back into
the device_get_mac_addr() function before calling
is_valid_ether_addr() similar to the way the OF
routine does it.

Update the comments for the two new functions.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 14:36:25 -07:00
David S. Miller
ef09242f39 Major changes:
ath10k:
 
 * add support for qca99x0 family of devices
 * improve performance of tx_lock
 * add support for raw mode (802.11 frame format) and software crypto
   engine enabled via a module parameter
 
 ath9k:
 
 * add fast-xmit support
 
 wil6210:
 
 * implement TSO support
 * support bootloader v1 and onwards
 
 iwlwifi:
 
 * Deprecate -10.ucode
 * Clean ups towards multiple Rx queues
 * Add support for longer CMD IDs. This will be required by new
   firmwares since we are getting close to the u8 limit.
 * bugfixes for the D0i3 power state
 * Add basic support for FTM
 * polish the Miracast operation
 * fix a few power consumption issues
 * scan cleanup
 * fixes for D0i3 system state
 * add paging for devices that support it
 * add again the new RBD allocation model
 * add more options to the firmware debug system
 * add support for frag SKBs in Tx
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJV1FziAAoJEG4XJFUm622bEJwH/RdNlAK4+IS9Tx0K6EA2fDE3
 001J16in/1IPPr8/RmQWNzHGN5/GAYlAdl5v4fkwb8qvcDCyPlQbSEC8ghd32H6M
 G1101qEfGk9bhLTpI8xjeqsT1gl98LswPYNAfoRX4AJKAmNCkfJ1WILLi/Q2DUOf
 oG6IersuqQOdQbkXDnMm49FBZeSkVvzsJL+WQhKhYblh0bDH3qGuLcYvtkSnt+P8
 8QG5X+DPEpmaYcu+5E5N0XgffsdPj/+xXlFova4DFySDYb4OzEH1MYp/rHjPpnUo
 nDJqxZIgkkmhu0CGtvpWNeSZ7GQBI0Bzdd+dwBY5yyg5AqWuQ5A1W+4r3SjvHyU=
 =A8Ax
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-for-davem-2015-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
Major changes:

ath10k:

* add support for qca99x0 family of devices
* improve performance of tx_lock
* add support for raw mode (802.11 frame format) and software crypto
  engine enabled via a module parameter

ath9k:

* add fast-xmit support

wil6210:

* implement TSO support
* support bootloader v1 and onwards

iwlwifi:

* Deprecate -10.ucode
* Clean ups towards multiple Rx queues
* Add support for longer CMD IDs. This will be required by new
  firmwares since we are getting close to the u8 limit.
* bugfixes for the D0i3 power state
* Add basic support for FTM
* polish the Miracast operation
* fix a few power consumption issues
* scan cleanup
* fixes for D0i3 system state
* add paging for devices that support it
* add again the new RBD allocation model
* add more options to the firmware debug system
* add support for frag SKBs in Tx
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 14:13:25 -07:00
Johannes Berg
11ab35ed04 rt2x00: use DECLARE_EWMA
Instead of using the out-of-line EWMA calculation, use DECLARE_EWMA()
to create static inlines. On x86/64 this results in code that's one
byte larger (for me), but reduces struct link_ant and struct link
size by the two unsigned long values that store the parameters each.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 14:10:22 -07:00
Johannes Berg
46f26ddf56 ath5k: use DECLARE_EWMA
This reduces code size slightly (at least on x86/64) while also
removing memory consumption by two unsigned long values for each
ath5k device.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 14:10:22 -07:00
Johannes Berg
5377d75823 virtio_net: use DECLARE_EWMA
Instead of using the out-of-line EWMA calculation, use DECLARE_EWMA()
to create static inlines. On x86/64 this results in no change in code
size for me, but reduces the struct receive_queue size by the two
unsigned long values that store the parameters.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 14:10:22 -07:00
Bjorn Helgaas
9dae3a9729 PCI: Move MPS configuration check to pci_configure_device()
Previously we checked for invalid MPS settings, i.e., a device with MPS
different than its upstream bridge, in pcie_bus_detect_mps().  We only did
this if the arch or hotplug driver called pcie_bus_configure_settings(),
and then only if PCIe bus tuning was disabled (PCIE_BUS_TUNE_OFF).

Move the MPS checking code to pci_configure_device(), so we do it in the
pci_device_add() path for every device.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-08-20 16:08:27 -05:00
Yuval Mintz
0f8f27de19 bnx2x: Fix vxlan endianity issue
Commit f34fa14cc0 ("bnx2x: Add vxlan RSS support") has introduced an
endianity issue when passing the vxlan UDP port to the HW.

Reported-by: <fengguang.wu@intel.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 14:08:08 -07:00
Christian König
26a6980cf4 drm/amdgpu: fix CS error handling v2
Stop double freeing the the BO list by pulling the content
of amdgpu_cs_parser_prepare_job() into the IOCTL function again.

v2: better commit message

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com> (v1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-08-20 17:06:10 -04:00
Christian König
b203dd9594 drm/amdgpu: fix zeroing all IB fields manually v2
The problem now is that we don't necessarily call amdgpu_ib_get()
in some error paths and so work with uninitialized data.

Better require that the memory is already zeroed.

v2: better commit message

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com> (v1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-08-20 17:05:34 -04:00
Christian König
bf7ebaeed4 drm/amdgpu: free the job immediately after dispatching it
Fixes a whole bunch of lockdep warnings.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
2015-08-20 17:05:01 -04:00
Christian König
2b184d8dbc drm/amdgpu: use a spinlock instead of a mutex for the rq
More appropriate and fixes some nasty lockdep warnings.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
2015-08-20 17:03:47 -04:00
Chunming Zhou
a3348bb801 drm/amdgpu: don't need to use bo_list_clone any more
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian K?nig <christian.koenig@amd.com>
2015-08-20 17:02:58 -04:00
Chunming Zhou
3c4adead84 drm/amdgpu: some clean up for cs_ioctl
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian K?nig <christian.koenig@amd.com>
2015-08-20 17:02:09 -04:00
Chunming Zhou
4fe6311734 drm/amdgpu: prepare job should be common code path
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian K?nig <christian.koenig@amd.com>
2015-08-20 17:01:32 -04:00
Chunming Zhou
bb977d3711 drm/amdgpu: abstract amdgpu_job for scheduler
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian K?nig <christian.koenig@amd.com>
2015-08-20 17:00:35 -04:00
Eric Anholt
1a15aaa998 irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2
This interrupt controller is the new root interrupt controller with
the timer, PMU events, and IPIs, and the bcm2835's interrupt
controller is chained off of it to handle the peripherals.

I wrote the interrupt chip support, while Andrea Merello wrote the IPI
code.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: Lee Jones <lee@kernel.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1438902033-31477-5-git-send-email-eric@anholt.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-20 22:38:42 +02:00
Eric Anholt
a493f339a8 irqchip/bcm2835: Add support for being used as a second level controller
The BCM2836 (Raspberry Pi 2) uses two levels of interrupt handling
with the CPU-local interrupts being the root, so we need to register
ours as chained off of the CPU's local interrupt.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: Lee Jones <lee@kernel.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1438902033-31477-3-git-send-email-eric@anholt.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-20 22:38:41 +02:00
Eric Anholt
de58e52f20 irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ
For BCM2836, we want to chain into this IRQ chip from the root
controller, and for chaining we need to do something else instead of
handle_IRQ() once we have decoded the IRQ.

Note that this changes the behavior a little bit: Previously for a
non-shortcut IRQ, we'd loop reading and handling the second level IRQ
status until it was cleared before returning to the loop reading the
top level IRQ status (Note that the top level bit is just an OR of the
low level bits).  For the expected case of just one interrupt to be
handled, this was an extra register read, so we're down from 4 to 3
reads.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: Lee Jones <lee@kernel.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1438902033-31477-2-git-send-email-eric@anholt.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-20 22:38:41 +02:00