Commit graph

287,481 commits

Author SHA1 Message Date
yalin wang
33836ee985 hwmon:change sht15_reverse()
This change sht15_reverse() to be generic bitrev8().

Signed-off-by: yalin wang <yalin.wang2010@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-08-10 23:00:10 -07:00
Guenter Roeck
cfca3789e0 hwmon: (pmbus) Add device IDs for TPS544{B,C}2{0,5}
Add device IDs and references for Texas Instruments TPS544B20, TPS544B25,
TPS544C20, and TPS544C25 to the generic PMBus driver.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-08-10 22:59:47 -07:00
Sebastian Krzyszkowiak
6d212b8adc ideapad-laptop: add alternative representation for Yoga 2 to DMI table
There is at least one (mine) Yoga 2 Pro in existence that has incorrect
product version stored in DMI (reading as "INVALID"), causing it to not be
recognized as Yoga 2 by ideapad-laptop module, which in turn causes
non-existent hardware rfkills to be always reported as blocked.

This change adds a second check by board name, which is "Yoga2".
Looks like it also happens to be "INVALID" on some other Yoga 2 machines
where product version is correct instead, so the original check is left
intact to catch both cases.

Signed-off-by: Sebastian Krzyszkowiak <dos@dosowisko.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-08-10 21:24:23 -07:00
Łukasz Stelmach
97ade7697b asus-laptop: Add key found on Asus F3M
Asus F3M has two keys labeled with an icon of a touchpad. The first,
reported as 0x6B is next to the power key and the second, reported as
0x6A, is F9 combined with Fn button. When I was pressing the latter, I was
getting "Unknown key 6a pressed" message before applying this patch.

Asus F3M does not support WMI so the commit does not update key mappings
in the asus-nb-wmi.c file.

I have not tested this mapping on any other Asus laptop.

Signed-off-by: Łukasz Stelmach <stlman@poczta.fm>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-08-10 21:24:23 -07:00
Atzm Watanabe
07a51cd379 vxlan: fix fdb_dump index calculation
When too many remotes are bound to an FDB entry, index may not be increased.
This problem will be caused on the large scale environment that is based on
the unicast default destination, for instance.

Signed-off-by: Atzm Watanabe <atzm@iij.ad.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 21:15:18 -07:00
Yong Li
8599822916 cc2520: set the default fifo pin value from platform data
When the device tree support is disabled, the fifo_pin is uninitialized,
this patch will set the fifo_pin value based on platform data

Signed-off-by: Yong Li <sdliyong@gmail.com>
Acked-by: Varka Bhadram <varkabhadram@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-11 06:13:39 +02:00
Fabio Estevam
ed8db18dea mellanox: mlxsw: Use '%zx' to print size_t format
Use '%zx' to print size_t format in order to fix the following build warning:

drivers/net/ethernet/mellanox/mlxsw/item.h:65:3: warning: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'size_t' [-Wformat=]

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 21:12:49 -07:00
Fabio Estevam
9d332d92a9 mkiss: Fix error handling in mkiss_open()
If register_netdev() fails we are not propagating the error and
we return success because ax_open() succeeded previously.

Fix this by checking the return value of ax_open() and
register_netdev() and propagate the error in case of failure.

Reported-by: RUC_Soft_Sec <zy900702@163.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 21:10:31 -07:00
Hans de Goede
fa92a31b33 ideapad-laptop: Add Lenovo Yoga 3 14 to no_hw_rfkill dmi list
Like some of the other Yoga models the Lenovo Yoga 3 14 does not have a
hw rfkill switch, and trying to read the hw rfkill switch through the
ideapad module causes it to always reported blocking breaking wifi.

This commit adds the Lenovo Yoga 3 14 to the no_hw_rfkill dmi list, fixing
the wifi breakage.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1239050
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-08-10 20:29:59 -07:00
Dan Williams
92b19ff50e cleanup IORESOURCE_CACHEABLE vs ioremap()
Quoting Arnd:
    I was thinking the opposite approach and basically removing all uses
    of IORESOURCE_CACHEABLE from the kernel. There are only a handful of
    them.and we can probably replace them all with hardcoded
    ioremap_cached() calls in the cases they are actually useful.

All existing usages of IORESOURCE_CACHEABLE call ioremap() instead of
ioremap_nocache() if the resource is cacheable, however ioremap() is
uncached by default. Clearly none of the existing usages care about the
cacheability. Particularly devm_ioremap_resource() never worked as
advertised since it always fell back to plain ioremap().

Clean this up as the new direction we want is to convert
ioremap_<type>() usages to memremap(..., flags).

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-10 23:07:06 -04:00
Dan Williams
2584cf8357 arch, drivers: don't include <asm/io.h> directly, use <linux/io.h> instead
Preparation for uniform definition of ioremap, ioremap_wc, ioremap_wt,
and ioremap_cache, tree-wide.

Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-10 23:07:05 -04:00
Jason A. Donenfeld
a73e99cb67 staging: ozwpan: Remove from tree
Ozwpan is completely unmaintained and potentially a security problem. As
this is a staging driver, it should be removed, since it has been
abandoned.

Cc: Shigekatsu Tateno <shigekatsu.tateno@atmel.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-10 17:00:49 -07:00
Jason Gerecke
025bcc1540 HID: wacom: Simplify 'wacom_pl_irq'
Unlike other IRQ functions, 'wacom_pl_irq' uses the second element of
the 'tool' array to store information about its single pen. This makes
the function more difficult to understand (since it doesn't follow the
general pattern of other IRQ functions) and prevents the possibility of
refactoring how pen state is stored.

This patch rewrites 'wacom_pl_irq' to follow the usual IRQ conventions,
including storing tool type in 'tool[0]' and implicitly tracking prox
with the 'id[0]' variable.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-11 01:03:48 +02:00
Linus Torvalds
7a834ba5e2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:

 - fix for bounds limit calculation in uclogic driver, by Dan Carpenter

 - fix for use-after-free during device removal, by Krzysztof Kozlowski

 - fix for userspace regression (that became apparent only with shiny
   new libinput, so it's not that bad, but I still consider it 4.2
   material), in wacom driver, by Jason Gerecke

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wacom: Report correct device resolution when using the wireless adapater
  HID: hid-input: Fix accessing freed memory during device disconnect
  HID: uclogic: fix limit in uclogic_tablet_enable()
2015-08-10 15:16:48 -07:00
Ben Young Tae Kim
0ff252c197 Bluetooth: hciuart: Add support QCA chipset for UART
QCA61x4 chips have supported sleep feature using In-Band-Sleep commands
to enable sleep feature based on H4 protocol. After sending
patch/nvm configuration is done, IBS mode will be up and running

Signed-off-by: Ben Young Tae Kim <ytkim@qca.qualcomm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-10 23:52:20 +02:00
Ben Young Tae Kim
83e81961ff Bluetooth: btqca: Introduce generic QCA ROME support
This is for supporting BT for QCA ROME with vendor specific
HCI commands and initialization on the chip. This will have
USB/UART implementation both, but for now, adding UART vendor
specific commands to patch downloading and set Bluetooth device
address using vendor specific command.

Signed-off-by: Ben Young Tae Kim <ytkim@qca.qualcomm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-10 23:52:20 +02:00
Jason Gerecke
0be017120b HID: wacom: Report correct device resolution when using the wireless adapater
The 'wacom_wireless_work' function does not recalculate the tablet's
resolution, causing the value contained in the 'features' struct to
always be reported to userspace. This value is valid only for the pen
interface, meaning that the value will be incorrect for the touchpad (if
present). This in particular causes problems for libinput which relies
on the reported resolution being correct.

This patch adds the necessary calls to recalculate the resolution for
each interface. This requires a little bit of code shuffling since both
the 'wacom_set_default_phy' and 'wacom_calculate_res' are declared below
their new first point of use in 'wacom_wireless_work'.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-10 23:49:56 +02:00
Daniel Axtens
d3d73f4b38 cxl: Compile with -Werror
It's a good idea, and it brings us in line with the rest of arch/powerpc.

Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-11 07:43:40 +10:00
Yuval Mintz
0ea853dfa9 bnx2x: Free NVRAM lock at end of each page
Writing each 4Kb page into flash might take up-to ~100 miliseconds,
during which time management firmware cannot acces the nvram for its
own uses.

Firmware upgrade utility use the ethtool API to burn new flash images
for the device via the ethtool API, doing so by writing several page-worth
of data on each command. Such action might create problems for the
management firmware, as the nvram might not be accessible for a long time.

This patch changes the write implementation, releasing the nvram lock on
the completion of each page, allowing the management firmware time to
claim it and perform its own required actions.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 14:31:59 -07:00
Yuval Mintz
e1615903eb bnx2x: Prevent null pointer dereference on SKB release
On error flows its possible to free an SKB even if it was not allocated.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 14:31:58 -07:00
yalin wang
bec7a630a6 isdn: Remove reverse_bits(), use revbit8()
This change isdn driver, remove reverse_bits() function,
use the generic revbit8() function instead.

Signed-off-by: yalin wang <yalin.wang2010@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 14:29:04 -07:00
Dan Carpenter
2f3a87326d cxgb4: cleanup some indenting
Add or remove some tabs so that statements line up correctly.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 14:26:53 -07:00
Dan Carpenter
21a447637d cxgb4: missing curly braces in t4_setup_debugfs()
There were missing curly braces so it means we call add_debugfs_mem()
unintentionally.

Fixes: 3ccc6cf74d ('cxgb4: Adds support for T6 adapter')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 14:26:26 -07:00
Andrew Lunn
966bce38e7 net: dsa: mv88e6352: Use mnemonics for EEPROM registers and bits
Add register definitions #defines for accessing the EEPROM.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 14:24:06 -07:00
Shahed Shaikh
02509f171d qlcnic: Update version to 5.3.63
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 13:34:29 -07:00
Shahed Shaikh
0e90ad9bfd qlcnic: Don't use kzalloc unncecessarily for allocating large chunk of memory
Driver allocates a large chunk of temporary buffer using kzalloc
to copy FW image. As there is no real need of this memory to be
physically contiguous, use vzalloc instead.

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 13:34:28 -07:00
Shahed Shaikh
da286a6fd1 qlcnic: Add new VF device ID 0x8C30
This is a 83xx series based VF device

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 13:34:28 -07:00
Shahed Shaikh
642de51025 qlcnic: Print firmware minidump buffer and template header addresses
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 13:34:28 -07:00
Shahed Shaikh
d01a6d3c8a qlcnic: Add support to enable capability to extend minidump for iSCSI
In some cases it is required to capture minidump for iSCSI functions
as part of default minidump collection process. To enable this, firmware
exports it's capability and driver need to enable that capability
by issuing a mailbox command.

With this feature, firmware can provide additional iSCSI function's
minidump with smaller minidump capture mask (0x1f).

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 13:34:28 -07:00
Harish Patil
a930a4639d qlcnic: Rearrange ordering of header files inclusion
Include local headers files after kernel's header files.

Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 13:34:28 -07:00
Madalin Bucur
07151bc9f7 net: phy: select copper mode when Marvel 88e1111 in SGMII
For the Marvel 88e1111 PHY only two SGMII modes are available, both
allowing only SGMII to copper mode (with or without clock). SGMII
to fiber mode is not supported. Make sure the fiber/copper registers
selector bits are cleared for selecting copper mode.

Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 13:31:18 -07:00
Kevin Hao
c4bc44c65b net: fec: fix the race between xmit and bdp reclaiming path
When we transmit a fragmented skb, we may run into a race like the
following scenario (assume txq->cur_tx is next to txq->dirty_tx):
           cpu 0                                          cpu 1
  fec_enet_txq_submit_skb
    reserve a bdp for the first fragment
    fec_enet_txq_submit_frag_skb
       update the bdp for the other fragment
       update txq->cur_tx
                                                   fec_enet_tx_queue
                                                     bdp = fec_enet_get_nextdesc(txq->dirty_tx, fep, queue_id);
                                                     This bdp is the bdp reserved for the first segment. Given
                                                     that this bdp BD_ENET_TX_READY bit is not set and txq->cur_tx
                                                     is already pointed to a bdp beyond this one. We think this is a
                                                     completed bdp and try to reclaim it.
    update the bdp for the first segment
    update txq->cur_tx

So we shouldn't update the txq->cur_tx until all the update to the
bdps used for fragments are performed. Also add the corresponding
memory barrier to guarantee that the update to the bdps, dirty_tx and
cur_tx performed in the proper order.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 13:28:14 -07:00
Bjorn Helgaas
2db0f71f56 PCI: pciehp: Remove ignored MRL sensor interrupt events
We queued interrupt events for the MRL being opened or closed, but the code
in interrupt_event_handler() that handles these events ignored them.

Stop enabling MRL interrupts and remove the ignored events.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-08-10 14:24:09 -05:00
Bjorn Helgaas
58fa2405bd PCI: pciehp: Remove unused interrupt events
The list of interrupt events (INT_BUTTON_IGNORE, INT_PRESENCE_ON, etc.) was
copied from other hotplug drivers, but pciehp doesn't use them all.

Remove the interrupt events that aren't used by pciehp.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-08-10 14:24:09 -05:00
Jarod Wilson
1469d17dd3 PCI: pciehp: Handle invalid data when reading from non-existent devices
It's platform-dependent, but an MMIO read to a non-existent PCI device
generally returns data with all bits set.  This happens when the host
bridge or Root Complex times out waiting for a response from the device and
fabricates return data to complete the CPU's read.

One example, reported in the bugzilla below, involved this hierarchy:

  pci 0000:00:1c.0: PCI bridge to [bus 02-3a] Root Port
  pci 0000:02:00.0: PCI bridge to [bus 03-0a] Upstream Port
  pci 0000:03:03.0: PCI bridge to [bus 05-07] Downstream Port
  pci 0000:05:00.0: PCI bridge to [bus 06-07] Thunderbolt Upstream Port
  pci 0000:06:00.0: PCI bridge to [bus 07]    Thunderbolt Downstream Port
  pci 0000:07:00.0: BCM57762 NIC

Unplugging the Thunderbolt switch and the NIC below it resulted in this:

  pciehp 0000:03:03.0: Surprise Removal
  tg3 0000:07:00.0: tg3_abort_hw timed out, TX_MODE_ENABLE will not clear MAC_TX_MODE=ffffffff
  pciehp 0000:06:00.0: unloading service driver pciehp
  pciehp 0000:06:00.0: pcie_isr: intr_loc 11f
  pciehp 0000:06:00.0: Switch interrupt received
  pciehp 0000:06:00.0: Latch open on Slot
  pciehp 0000:06:00.0: Attention button interrupt received
  pciehp 0000:06:00.0: Button pressed on Slot
  pciehp 0000:06:00.0: Presence/Notify input change
  pciehp 0000:06:00.0: Card present on Slot
  pciehp 0000:06:00.0: Power fault interrupt received
  pciehp 0000:06:00.0: Data Link Layer State change
  pciehp 0000:06:00.0: Link Up event

The pciehp driver correctly noticed that the Thunderbolt switch (05:00.0
and 06:00.0) and NIC (07:00.0) had been removed, and it called their driver
remove methods.

Since the NIC was already gone, tg3 received 0xffffffff when it tried to
read from the device.  The resulting timeout is a tg3 issue and not of
interest here.

Similarly, since the 06:00.0 Thunderbolt switch was already gone,
pcie_isr() received 0xffff when it tried to read PCI_EXP_SLTSTA, and pciehp
thought that was valid status showing that many events had happened: the
latch had been opened, the attention button had been pressed, a card was
now present, and the link was now up.  These are all wrong, of course, but
pciehp went on to try to power up and enumerate devices below the
non-existent bridge:

  pciehp 0000:06:00.0: PCI slot - powering on due to button press
  pciehp 0000:06:00.0: Surprise Insertion
  pci 0000:07:00.0 id reading try 50 times with interval 20 ms to get ffffffff

[bhelgaas: changelog, also check in pcie_poll_cmd() & pcie_do_write_cmd()]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=99841
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-08-10 14:24:09 -05:00
Bertold Van den Bergh
9b412590fa ath: Make ath_opmode_to_string understand OCB mode
Make ath_opmode_to_string return "OCB" for NL80211_IFTYPE_OCB. Currently
it will return "UNKNOWN".

Signed-off-by: Bertold Van den Bergh <bertold.vandenbergh@esat.kuleuven.be>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10 22:21:15 +03:00
Hauke Mehrtens
53cd2fdb00 bcma: fix access to host_pdev for PCIe devices
bus->host_pdev is part of a union so bus->host_pdev != NULL is probably
also true for PCIe devices, because there it accesses bus->host_pci. If
we access the dev member at the offset defined in struct
platform_device in struct pci_dev instead we probably get something
else.

This patch adds a new function which returns the host dev struct and
NULL if we do not have a host dev. When this gets registered on MIPS
brcm47xx we do not have a host dev in some situations.
This function could also be used in other places.

This problem was introduced in this commit:
commit cae761b5a6
Author: Rafa? Mi?ecki <zajec5@gmail.com>
Date:   Sun Jun 28 17:17:13 2015 +0200

    bcma: populate bus DT subnodes as platform_device-s

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10 22:20:46 +03:00
Jakub Kicinski
78623bfb6f mt7601u: lock out rx path and tx status reporting
mac80211 requires that rx path does not run concurrently with
tx status reporting.  Add a spinlock which will ensure that.

Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10 22:19:35 +03:00
Jakub Kicinski
4513493d18 mt7601u: fix tx status reporting contexts
mac80211 requires that rx path does not run concurrently with
tx status reporting.  Since rx path is run in driver tasklet,
tx status cannot be reported directly from interrupt context
(there would be no way to lock it out).

Add tasklet for tx and move all possible code from irq handler
there.

Note: tx tasklet is needed because workqueue is queued very
      rarely and that kills TCP performance.

Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10 22:19:34 +03:00
Jakub Kicinski
d9517c0a5d mt7601u: use correct ieee80211_rx variant
Rx is run inside a tasklet so ieee80211_rx() should be used
instead of ieee80211_rx_ni().

Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10 22:19:32 +03:00
Jakub Kicinski
bed429e1ae mt7601u: fix dma from stack address
DMA to variables located on the stack is a bad idea.
For simplicity and to avoid frequent allocations create
a buffer inside the device structure.  Protect this
buffer with vendor_req_mutex.  Don't protect vendor
requests which don't use this buffer.

Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10 22:19:31 +03:00
Eliad Peller
7845af35e0 wlcore: add p2p device support
When starting a p2p mgmt interface, enable its device role. This
allows us to keep the sta role disabled and scan on the dev role.

In general, p2p management interfaces cannot send vif-specific commands
to FW, as the vif role id is invalid. Only off-channel data and scans
happen on this vif, so most ops are not relevant.

If the vif is a p2p mgmt vif, block some mac80211 ops.

Configure rate policies for p2p mgmt interface, as
otherwise p2p packets come out with arbitrary rates.

Since wpa_supplicant currently doesn't support standalone
p2p device mode (without another attached managed interface),
add p2p device to the allowed interface combinations without
decreasing the allowed station count.

Moreover, increase the station count in some cases, as AP
mode usually starts as station interface, and the AP interface
is now different from the p2p management one).

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10 22:16:34 +03:00
Eliad Peller
c32e35f29c wlcore: add generic_cfg_feature command definitions
Add definitions and function prototypes for generic_cfg
command.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10 22:16:25 +03:00
Eliad Peller
8698a3a4ff wl18xx: use long intervals in sched scan
Add support for long intervals on sched scan.

If configured, the original request interval will
be used num_short_interval times, and then the
long interval will be used.

While on it, fix the scan command field names
to reflect the expected value is in ms (rather
than secs).

These values will be taken from the conf file,
so bump its version accordingly.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10 22:16:21 +03:00
Machani, Yaniv
6d5c898798 wlcore/wl18xx : add time sync event handling
Added support for a new time sync event
the event data contains the WiLink TSF value.
To trigger the event, a HW modification is required,
so as a supporting firmware binary.

Signed-off-by: Yaniv Machani <yanivma@ti.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10 22:16:17 +03:00
Amitkumar Karwar
100a008331 mwifiex: correct TDLS link delete failure message priority
Commit d8d2f19feb ("mwifiex: silence TDLS link delete failure
for nonexistent link") lowers the priority of error message when
TDLS link is already deleted. But it had got increased by
commit acebe8c10a ("mwifiex: change dbg print func to
mwifiex_dbg")

Reported-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10 22:15:18 +03:00
Alexander Aring
fc0719e6a1 at86rf230: use STATE_TX_ARET mode only
This patch changes the state change behaviour of at86rf230 to always
TX_ARET mode. According the at86rf2xx datasheets TX_ARET mode doesn't
mean to be always waiting for ack frames after transmit. The transceiver
will automatically wait for ack frames or not if the acknowledge request
bit is set. See section "TX_ARET_ON – Transmit with Automatic Frame
Retransmission and CSMA-CA Retry".

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-10 20:43:06 +02:00
Aniket Nagarnaik
4863e4cc31 Bluetooth: btmrvl: release sdio bus after firmware is up
We will not release sdio bus until firmware is completely
downloaded and becomes ready. Our 8887 A2 chip can have
separate firmware images for WLAN and bluetooth. This
patch fixes an issue observed when both drivers
simultaneously try to download respective firmwares.

Signed-off-by: Aniket Nagarnaik <aniketn@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-10 20:41:34 +02:00
Alexandre Belloni
bdbbd38106 spi: atmel: remove useless include
Definitions from linux/platform_data/atmel.h are not used, remove the
include.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-10 19:07:04 +01:00
Ivan Vecera
ade4dc3e61 bna: fix interrupts storm caused by erroneous packets
The commit "e29aa33 bna: Enable Multi Buffer RX" moved packets counter
increment from the beginning of the NAPI processing loop after the check
for erroneous packets so they are never accounted. This counter is used
to inform firmware about number of processed completions (packets).
As these packets are never acked the firmware fires IRQs for them again
and again.

Fixes: e29aa33 ("bna: Enable Multi Buffer RX")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 10:58:37 -07:00