Commit graph

287,481 commits

Author SHA1 Message Date
Moritz Fischer
fedf42b50d reset: reset-zynq: Adding support for Xilinx Zynq reset controller.
This adds a reset controller driver to control the Xilinx Zynq
AP-SoC's various resets.

Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-08-04 17:07:46 +02:00
Ross Lagerwall
fcdf31a7c1 xen/events/fifo: Handle linked events when closing a port
An event channel bound to a CPU that was offlined may still be linked
on that CPU's queue.  If this event channel is closed and reused,
subsequent events will be lost because the event channel is never
unlinked and thus cannot be linked onto the correct queue.

When a channel is closed and the event is still linked into a queue,
ensure that it is unlinked before completing.

If the CPU to which the event channel bound is online, spin until the
event is handled by that CPU. If that CPU is offline, it can't handle
the event, so clear the event queue during the close, dropping the
events.

This fixes the missing interrupts (and subsequent disk stalls etc.)
when offlining a CPU.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-04 15:41:59 +01:00
Krzysztof Kozlowski
0621809e37 HID: hid-input: Fix accessing freed memory during device disconnect
During unbinding the driver was dereferencing a pointer to memory
already freed by power_supply_unregister().

Driver was freeing its internal description of battery through pointers
stored in power_supply structure. However, because the core owns the
power supply instance, after calling power_supply_unregister() this
memory is freed and the driver cannot access these members.

Fix this by storing the pointer to internal description of battery in a
local variable before calling power_supply_unregister(), so the pointer
remains valid.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reported-by: H.J. Lu <hjl.tools@gmail.com>
Fixes: 297d716f62 ("power_supply: Change ownership from driver to core")
Cc: <stable@vger.kernel.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-08-04 15:45:44 +02:00
Jason Gerecke
3f14a63a54 HID: wacom: Remove WACOM_QUIRK_NO_INPUT
WACOM_QUIRK_NO_INPUT is a signal to the driver that input devices
should not be created for a particular device. This quirk was used by
the wireless receiver to prevent any devices from being created during
the initial probe (defering it instead until we got a tablet connection
event in 'wacom_wireless_work').

This quirk is not necessary now that a device_type is associated with each
device. Any input device allocated by 'wacom_allocate_inputs' which is
not necessary for a particular device is freed in 'wacom_register_inputs'.
In particular, none of the wireless receivers devices have the pen, pad,
or touch device types set so the same effect is achieved without the need
to be explicit.

We now return early in wacom_retrieve_hid_descriptor for wireless devices
(to prevent the device_type from being overridden) but since we ignore the
HID descriptor for the wireless reciever anyway, this is not an issue.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-08-04 15:39:21 +02:00
Jason Gerecke
ccad85cc1e HID: wacom: Replace WACOM_QUIRK_MONITOR with WACOM_DEVICETYPE_WL_MONITOR
The monitor interface on the wireless receiver is more logically expressed
as a type of device instead of a quirk.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-08-04 15:39:20 +02:00
Jason Gerecke
8dc8641e61 HID: wacom: Use calculated pkglen for wireless touch interface
Commit 01c846f introduced the 'wacom_compute_pktlen' function which
automatically determines the correct value for an interface's pkglen
by scanning the HID descriptor. This function returns the correct
value for the wireless receiver's touch interface, removing the need
for us to set it manually here.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-08-04 15:39:20 +02:00
Herbert Xu
aeb4c132f3 crypto: talitos - Convert to new AEAD interface
This patch converts talitos to the new AEAD interface.  IV generation
has been removed since it's equivalent to a software implementation.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04 20:45:34 +08:00
Herbert Xu
e19ab1211d crypto: qat - Convert to new AEAD interface
This patch converts qat to the new AEAD interface.  IV generation
has been removed since it's equivalent to a software implementation.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Tadeusz Struk <tadeusz.struk@intel.com>
2015-08-04 20:45:33 +08:00
Herbert Xu
c1359495c8 crypto: picoxcell - Convert to new AEAD interface
This patch converts picoxcell to the new AEAD interface.  IV
generation has been removed since it's equivalent to a software
implementation.

As picoxcell cannot handle SG lists longer than 16 elements,
this patch has made the software fallback mandatory.  If an SG
list comes in that exceeds the limit, we will simply use the
fallback.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04 20:45:33 +08:00
Herbert Xu
d7295a8dc9 crypto: ixp4xx - Convert to new AEAD interface
This patch converts ixp4xx to the new AEAD interface.  IV generation
has been removed since it's a purely software implementation.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04 20:45:32 +08:00
Herbert Xu
479bcc7c5b crypto: caam - Convert authenc to new AEAD interface
This patch converts the authenc implementations in caam to the
new AEAD interface.  The biggest change is that seqiv no longer
generates a random IV.  Instead the IPsec sequence number is used
as the IV.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04 20:45:31 +08:00
Herbert Xu
1d6669fa83 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Merge the crypto tree to pull in the qat registration bug fix.
2015-08-04 20:44:35 +08:00
Jon Hunter
4c2880b31c irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance
Commit 3228950621 ("irqchip: gic: Preserve gic V2 bypass bits in cpu
ctrl register") added a new function, gic_cpu_if_up(), to program the
GIC CPU_CTRL register. This function assumes that there is only one GIC
instance present and hence always uses the chip data for the primary GIC
controller. Although it is not common for there to be a secondary, some
devices do support a secondary. Therefore, fix this by passing
gic_cpu_if_up() a pointer to the appropriate chip data structure.

Similarly, the function gic_cpu_if_down() only assumes that there is a
single GIC instance present. Update this function so that an instance
number is passed for the appropriate GIC and return an error code on
failure. The vexpress TC2 (which has a single GIC) is currently the only
user of this function and so update it accordingly. Note that because the
TC2 only has a single GIC, the call to gic_cpu_if_down() should always
be successful.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1438332252-25248-2-git-send-email-jonathanh@nvidia.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-04 14:14:06 +02:00
Jon Hunter
567e5a0148 irqchip/gic: Only allow the primary GIC to set the CPU map
The gic_init_bases() function initialises an array that stores the mapping
between the GIC and CPUs. This array is a global array that is
unconditionally initialised on every call to gic_init_bases(). Although,
it is not common for there to be more than one GIC instance, there are
some devices that do support nested GIC controllers and gic_init_bases()
can be called more than once.

A 2nd call to gic_init_bases() will clear the previous CPU mapping and
will only setup the mapping again for the CPU calling gic_init_bases().
Fix this by only allowing the CPU map to be configured for the primary GIC.

For secondary GICs the CPU map is not relevant because these GICs do not
directly route the interrupts to the main CPU(s) but to other GICs or
devices.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1438332252-25248-1-git-send-email-jonathanh@nvidia.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-04 14:14:06 +02:00
Michael Holzheu
c29a7baf09 s390/numa: add emulation support
NUMA emulation (aka fake NUMA) distributes the available memory to nodes
without using real topology information about the physical memory of the
machine.

Splitting the system memory into nodes replicates the memory management
structures for each node. Particularly each node has its own "mm locks"
and its own "kswapd" task.

For large systems, under certain conditions, this results in improved
system performance and/or latency based on reduced pressure on the mm
locks and the kswapd tasks.

NUMA emulation distributes CPUs to nodes while respecting the original
machine topology information. This is done by trying to avoid to separate
CPUs which reside on the same book or even on the same MC. Because the
current Linux scheduler code requires a stable cpu to node mapping, cores
are pinned to nodes when the first CPU thread is set online.

This patch is based on the initial implementation from Philipp Hachtmann.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-08-04 14:06:53 +02:00
Aaron Sierra
76bea64c4c crypto: talitos - Remove zero_entry static initializer
Compiling the talitos driver with my GCC 4.3.1 e500v2 cross-compiler
resulted in a failed build due to the anonymous union/structures
introduced in this commit:

  crypto: talitos - enhanced talitos_desc struct for SEC1

The build error was:

  drivers/crypto/talitos.h:56: error: unknown field 'len' specified in initializer
  drivers/crypto/talitos.h:56: warning: missing braces around initializer
  drivers/crypto/talitos.h:56: warning: (near initialization for 'zero_entry.<anonymous>')
  drivers/crypto/talitos.h:57: error: unknown field 'j_extent' specified in initializer
  drivers/crypto/talitos.h:58: error: unknown field 'eptr' specified in initializer
  drivers/crypto/talitos.h:58: warning: excess elements in struct initializer
  drivers/crypto/talitos.h:58: warning: (near initialization for 'zero_entry')
  make[2]: *** [drivers/crypto/talitos.o] Error 1
  make[1]: *** [drivers/crypto] Error 2
  make: *** [drivers] Error 2

This patch eliminates the errors by relying on the C standard's
implicit assignment of zero to static variables.

Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04 17:41:33 +08:00
Colin Ian King
327cbbabfb crypto: img-hash - fix spelling mistake in dev_err error message
Trival change, fix spelling mistake 'aquire' -> 'acquire' in
dev_err message.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04 17:41:31 +08:00
Daniel Vetter
6ea76f3cad drm/atomic-helpers: Make encoder picking more robust
We've had a few issues with atomic where subtle bugs in the encoder
picking logic lead to accidental self-stealing of the encoder,
resulting in a NULL connector_state->crtc in update_connector_routing
and subsequent.

Linus applied some duct-tape for an mst regression in

commit 27667f4744
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Wed Jul 29 22:18:16 2015 -0700

    i915: temporary fix for DP MST docking station NULL pointer dereference

But that was incomplete (the code will still oops when debuggin is
enabled) and mangled the state even further. So instead WARN and bail
out as the more future-proof option.

Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-08-04 11:10:41 +02:00
Daniel Vetter
42639ba554 drm/dp-mst: Remove debug WARN_ON
Apparently been in there since forever and fairly easy to hit when
hotplugging really fast. I can do that since my mst hub has a manual
button to flick the hpd line for reprobing. The resulting WARNING spam
isn't pretty.

Cc: Dave Airlie <airlied@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-08-04 11:10:16 +02:00
Daniel Vetter
459485ad35 drm/i915: Fixup dp mst encoder selection
In

commit 8c7b5ccb72
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date:   Tue Apr 21 17:13:19 2015 +0300

    drm/i915: Use atomic helpers for computing changed flags

we've switched over to the atomic version to compute the
crtc->encoder->connector routing from the i915 variant. That one
relies upon the ->best_encoder callback, but the i915-private version
relied upon intel_find_encoder. Which didn't matter except for dp mst,
where the encoder depends upon the selected crtc.

Fix this functional bug by implemented a correct atomic-state based
encoder selector for dp mst.

Note that we can't get rid of the legacy best_encoder callback since
the fbdev emulation uses that still. That means it's incorrect there
still, but that's been the case ever since i915 dp mst support was
merged so not a regression. Best to fix that by converting fbdev over
to atomic too.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-08-04 11:10:02 +02:00
Daniel Vetter
3b8a684bd6 drm/atomic-helper: Add an atomice best_encoder callback
With legacy helpers all the routing was already set up when calling
best_encoder and so could be inspected. But with atomic it's staged,
hence we need a new atomic compliant callback for drivers which need
to inspect the requested state and can't just decided the best encoder
statically.

This is needed to fix up i915 dp mst where we need to pick the right
encoder depending upon the requested CRTC for the connector.

v2: Don't forget to amend the kerneldoc

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-08-04 11:09:25 +02:00
Alban Bedel
ff591a9122 reset: Add a driver for the reset controller on the AR71XX/AR9XXX
The AR71XX/AR9XXX SoC have a simple reset controller with one bit per
reset line.

Signed-off-by: Alban Bedel <albeu@free.fr>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-08-04 10:41:30 +02:00
Hariprasad Shenai
f109ff110b cxgb4: Update T6 register ranges
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04 01:24:35 -07:00
Hariprasad Shenai
d86bd29e0b cxgb4/cxgb4vf: read the correct bits of PL Who Am I register
Read the correct bits of PL Who Am I for the Source PF field which has
changed in T6

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04 01:24:35 -07:00
Hariprasad Shenai
bf8ebb67da cxgb4: Add support to dump edc bist status
Add support to dump edc bist status for ECC data errors

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04 01:24:34 -07:00
Hariprasad Shenai
5888111cb8 cxgb4: Add debugfs support to dump meminfo
Add debug support to dump memory address ranges of various hardware
modules of the adapter.

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04 01:24:34 -07:00
Eliad Peller
18f5a374b3 iwlwifi: pcie: reset write pointer on ict reset
Since the CSR_DRAM_INIT_TBL_WRITE_POINTER bit wasn't set
on ict reset, in some flows (like disable ict followed by
immediate reset ict) the driver and hardware went out
of sync (the driver cleared the ict_index, while the hw
kept it intact).

Fix it by setting the flag when resetting ict.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:17:32 +03:00
Eliad Peller
6dfb36c89d iwlwifi: call d3_suspend/resume in d0i3 case as well
Some CSR registers have to be configured also
in case of suspend/resume with unified image
(which doesn't includes reconfiguration flow).

Reuse the existing d3_suspend/d3_resume trans ops,
while making sure some configurations are a bit
different, according to the wowlan type.

After this change, we no longer need the special
wowlan_d0i3 configurations done in iwl_pci_resume,
as they are already being done in the d3_resume op.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:17:32 +03:00
Gregory Greenman
cdc306b2f6 iwlwifi: mvm: ignore CQM when setting beacon filtering in D0i3 enter flow
CQM overwrites a few thresholds in the bf command. On the other hand,
when entering D0i3 the thresholds are set to higher values on purpose,
so ignore CQM in this case.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:50 +03:00
Gregory Greenman
f739c39ce6 iwlwifi: mvm: fix beacon filtering temperature thresholds for D0i3
The slow filtering threshold should be higher in D0i3 case.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:50 +03:00
Avri Altman
93190fb058 iwlwifi: mvm: Enable Rx Checksum hw
TCP software implementation on the host requires extensive computing
power.  Offloading even some of the TCP/IP stack to the NIC might save
a significant overhead. In order to enable this feature on our hw,
we need to configure it first. Once done, we mark this capability,
to be advertised later to the OS via ieee80211_register_hw.
The driver Rx indications for TCP Checksum is integrated within the
standard Rx status. The driver responds to those indications as follows:
If the frame was tested by hw and checksum ok report CHECKSUM_UNNECESSARY.
Otherwise, report CHECKSUM_NONE.

Signed-off-by: Avri Altman <avri.altman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:49 +03:00
Haim Dreyfuss
869f3b15c9 iwlwifi: pcie: provide a way to stop configuration if it is forbidden
The firmware debug infrastructure allows the user to
provide a firmware that will toggle a few registers to
configure the debugging capabilities.
On certain devices, certain operations are forbidden.
Executing a forbidden operation will cause the hardware to
die in a way that only driver unload / load will bring it
back to life.
Fortunately, there is a way to know in advance if those
operations will be accepted by the device. This is where
the new PRPH_BLOCKBIT operation plays its role. If the bit
X from PRPH register Y is set, then we should prevent any
further register configuration. When that happens, drop a
line in the kernel log since this is really an error state:
the user won't have his device configured as he expected.
Add operations that will be used in the future:
INDIRECT_ASSIGN, INDIRECT_SETBIT, and INDIRECT_CLEARBIT.

Other debugging configurations (such as destination
configuration for the monitor) will take place in any case.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:49 +03:00
Ilan Peer
d0ab08d05e iwlwifi: mvm: Use the AP station for non_sta transmit
In iwl_mvm_tx_skb_non_sta(), in case of managed interface,
use the AP station for multicast frames instead of the auxiliary
station as otherwise the frames can be sent to an absent P2P GO as
the FW does not block transmissions for the auxiliary station
since it is not associated with the station MAC context.

Note that this is not possible for unicast frames, as a TDLS
discovery response is sent without a station entry, and in this
case the P2P GO NoA should not block transmission to the peer.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:48 +03:00
Avri Altman
d576cd9d59 iwlwifi: mvm: update comment of power_scheme module parameter
Signed-off-by: Avri Altman <avri.altman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:48 +03:00
Eliad Peller
c43fe907fe iwlwifi: return error if d0i3 was aborted
Allow the transport layer to return an error upon suspend.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:47 +03:00
Eliad Peller
2d42801bd6 Revert "iwlwifi: mvm: move deferred d0i3 exit to resume_complete op"
This reverts commit 088070a2f6.

When working in d0i3_on_idle mode, we explicitly go out
of d0i3 on resume (so other potential commands could
be sent).

However, D0I3_DEFER_WAKEUP is currently cleared on
resume complete (which happens only later on), causing
d0i3 exit to timeout.

Since mac80211 was modified to accept incoming frames
once drv_resume was called, we can safely revert this
patch, and handle the pending work on iwl_mvm_resume().

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:47 +03:00
Johannes Berg
88742c9e84 iwlwifi: mvm: move existing UMAC commands to group 1
Existing UMAC commands already use the long header, but are sent
with group 0 and the long header inserted manually. Move them to
the group 1 to take advantage of the header building in the low-
level transport.

Existing firmware ignores the group_id field (it's reserved) and
the first firmware that really supports long command headers can
parse all commands in both group 0 (with short header) and group
1 (with long header.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:46 +03:00
Aviya Erenfeld
ab02165cce iwlwifi: add wide firmware command infrastructure for TX
As the firmware is slowly running out of command IDs and grouping of
commands is desirable anyway, the firmware is extending the command
header from 4 bytes to 8 bytes to introduce a group (in place of the
former flags field, since that's always 0 on commands and thus can
be easily used to distinguish between the two.

In order to support this most easily in the driver widen the command
command ID used in the command sending functions and encode the new
values (group and version) in the ID. That way existing code doesn't
have to be changed (since the higher bits are 0 automatically) and
newer code can easily use the new ID generation function to create a
value to use in place of just the command ID.

Signed-off-by: Aviya Erenfeld <aviya.erenfeld@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:46 +03:00
Gregory Greenman
ce7929186a iwlwifi: mvm: add basic Time of Flight (802.11mc FTM) support
ToF is a time based method for measurement of the WiFi device
location within a WiFi environment. The driver functionality provided
by this patch is the interface for communication with FW and receiving
location related updates from the FW. The interface provided by this
patch is via debugfs.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:45 +03:00
Sara Sharon
6bcb00f618 iwlwifi: mvm: remove IWL_UCODE_TLV_API_BASIC_DWELL
All the supported firmwares support this API.
This includes removing dwell per band, as band is no longer a factor
in calculating the dwell. Only basic dwell is used and FW will calculate
the actual dwell time.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:45 +03:00
Johannes Berg
30f27df9ba iwlwifi: remove command header flags field
The 'flags' field really has been reserved in the firmware API for a
very long time, probably since 4965. As a consequence, the field is
always 0 and checking for a IWL_CMD_FAILED_MSK flag makes no sense.

Rename the field to 'reserved', get rid of IWL_CMD_FAILED_MSK and
all the code for it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:44 +03:00
Emmanuel Grumbach
31f920b63a iwlwifi: pcie: don't warn on long MPDUs when supported
In iwlmvm firmwares, the Byte count written in the scheduler
byte count table is in DWORDs and not in bytes.
We should check that this value fits in the 12 bits and
the value can be either in bits of in DWORD or bytes
depending on the firmware. Check the value after the
translation to DWORDs is done (if needed).

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:44 +03:00
Emmanuel Grumbach
33b56af188 iwlwifi: pcie: add missing calls to synchronize_irq()
In a few places, we were disabling interrupts but didn't
make sure that the interrupt handler has finished running.
Add calls to synchronize_irq() to ensure we finish handling
the interrupts before we free resources or other things that
could lead to a crash if the interrupt were to be handled
later.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:43 +03:00
Emmanuel Grumbach
1103323ca1 iwlwifi: pcie: cancel Tx timer upon firmware crash
When the firmware crashes, we can't expect the Tx queues to
progress. Cancel their timer.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:43 +03:00
Ilan Peer
5bf12f6096 iwlwifi: mvm: Do not sample the device time for session protection
Since the time-event is sent with the immediate flag set, there is
no need to sample the device time.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:42 +03:00
Johannes Berg
f7e6469fc9 iwlwifi: remove command and return value from opmode RX
With the previous patch series, no opmode continues using the
command or handler_status (i.e. the return value from the RX)
so it can be removed now.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:42 +03:00
Johannes Berg
0416841d70 iwlwifi: mvm: remove command/return value from RX handlers
In the mvm driver, neither the old command nor the return value
are used, so remove them.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:41 +03:00
Johannes Berg
73e686f399 iwlwifi: dvm: remove command/return value from RX handlers
After the previous patches, the command that's passed in nor the
return value are used any more, so can be removed.

While at it, make some functions static.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:41 +03:00
Johannes Berg
121b800919 iwlwifi: dvm: remove ADD_STA prints relying on station ID
This makes the logging a little less useful, but as they're mostly
synchronous commands it won't matter much. It gets rid of the
dependency on the input command, which this is the only user of.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:40 +03:00
Johannes Berg
4492bb6b10 iwlwifi: dvm: move ADD_STA response handling to sync command
This driver currently has some very confusing ADD_STA response handling
that runs asynchronously in the background for all of the commands, but
is only really necessary for synchronous ones (the really asynchronous
ones can only be done for already existing stations), and for the sync
ones it actually waits for the RX handler to return a status code.

Rework this to keep the debug printing in the handler, but do the code
that's supposed to have an effect only for sync commands in the command
sending function.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04 10:11:40 +03:00