Commit graph

287,481 commits

Author SHA1 Message Date
Bernhard Bender
968491709e Input: usbtouchscreen - avoid unresponsive TSC-30 touch screen
This patch fixes a problem in the usbtouchscreen driver for DMC TSC-30
touch screen.  Due to a missing delay between the RESET and SET_RATE
commands, the touch screen may become unresponsive during system startup or
driver loading.

According to the DMC documentation, a delay is needed after the RESET
command to allow the chip to complete its internal initialization. As this
delay is not guaranteed, we had a system where the touch screen
occasionally did not send any touch data. There was no other indication of
the problem.

The patch fixes the problem by adding a 150ms delay between the RESET and
SET_RATE commands.

Cc: stable@vger.kernel.org
Suggested-by: Jakob Mustafa <jakob.mustafa@bytecmed.com>
Signed-off-by: Bernhard Bender <bernhard.bender@bytecmed.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-23 14:43:17 -07:00
Bob Moore
6d9be0a5c4 ACPICA: iASL/Disassembler: Add prototype verbose mode
ACPICA commit add72dca18ab5d02f1bf9b08027570e58da520e8

This mode will emit AML byte code after each ASL statement.
This is a prototype only and requires additional development.

This patch only affects ACPICA disassembler which is not in the kernel
source tree.

Link: add72dca
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 23:09:08 +02:00
Lv Zheng
fdd8d831cf ACPICA: Debugger: Move debugger specific APIs to debugger component
ACPICA commit 2164923d60429eea7cd5a4a8629b607af7325afa

Some disassembler APIs should rather be debugger APIs. This patch moves
them to the debugger folder to be ready for debugger porting.

Since there is no in-kernel ACPICA debugger in the kernel source tree, this
patch doesn't affect the Linux kernel.

Link: 2164923d
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 23:09:08 +02:00
Lv Zheng
02ca26bef8 ACPICA: Debugger: Reduce structure size for debugger
ACPICA commit 310e0ae1c4730f4dadc80125125099ab76851499

arg_types in struct acpi_db_method_info is only referenced by ACPI_DEBUGGER.

This patch only affects ACPICA debugger which is only used by a non-kernel
tool - acpiexec, so Linux kernel is currently not affected by this patch.

Link: 310e0ae1
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 23:09:08 +02:00
Bob Moore
88606a2b90 ACPICA: Cleanup use of NEGATIVE and POSITIVE defines
ACPICA commit f88814201e01043a4f8caa69a69b799af11c44a3

These were defined in two places. Changed to ACPI_SIGN* names
and define them once in acmacros.h

This patch doesn't affect Linux kernel.

Link: f8881420
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 23:09:08 +02:00
Bob Moore
276291962e ACPICA: Cleanup use of all non-ANSI local C library functions
ACPICA commit 7c490c28a18b435c543c6b410e7e7c2131fccc78

ACPICA implements all non-ANSI functions locally. However, there
are sometimes two or more versions of the same function throughout
the ACPICA code. This change fixes this.

Adds a new file, utilities/utnonansi.c

Link: 7c490c28
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 23:09:08 +02:00
Bob Moore
53d9edce56 ACPICA: iASL: Add new warnings for method local_x and arg_x variables
ACPICA commit eb9f8cb9fd65f1149dd335d05944c31cbca41af3

1) Warn if a Local is set but never used
2) Warn if a arg_x is never used (for non-predefined method names)
3) Warn if a arg_x that is used as a local is never used

This patch only affects iASL which is not in the kernel source tree.

Link: eb9f8cb9
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 23:09:08 +02:00
Markus Elfring
dc67d0fa86 ACPICA: Remove extraneous check for null walk_state
ACPICA commit f9fd6e8bad0f16ce2b436c5cda36ced0c2d85302

Reported by Markus Elfring.

Link: f9fd6e8b
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 23:09:08 +02:00
Lv Zheng
ec4252a66b ACPICA: Parser: Remove redundant opcode execution debugging output
ACPICA commit c832b0a9263c560b3ae3ae31d7298ef33988f8d5

This patch removes one redundant debugging output of opcode execution which
has already been covered by acpi_ex_start_trace_opcode(). Lv Zheng.

Link: c832b0a9
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 23:09:07 +02:00
Lv Zheng
fb18e8fd08 ACPICA: Executer: Add option to bypass opcode tracing
ACPICA commit 61e9e20aadfaa03184d0959fbdc1fa5cdfea2551

This patch adds option to bypass opcode tracing. The option can be used to
reduce the trace message output. Lv Zheng.

Link: 61e9e20a
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 23:09:07 +02:00
Lv Zheng
bab0482418 ACPICA: Executer: Add OSL trace hook support
ACPICA commit e8e4a9b19d0b72a7b165398bdc961fc2f6f502ec

This patch adds OSL trace hook support.

OSPMs are encouraged to use acpi_os_trace_point() with
ACPI_USE_SYSTEM_TRACER defined to implement platform specific trace
facility. Lv Zheng.

Link: e8e4a9b1
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 23:09:07 +02:00
Lv Zheng
ab6c573320 ACPICA: Executer: Add interpreter tracing mode for method tracing facility
ACPICA commit 07fffd02607685b655ed92ee15c160e6a810b60b

The acpi_debug_trace() is the mechanism known as ACPI method tracing that is
used by Linux as ACPICA debugging message reducer. This facility can be
controlled through Linux ACPI subsystem - /sys/module/acpi/parameters.
This facility requires CONFIG_ACPI_DEBUG to be enabled to see ACPICA trace
logs in the kernel dmesg output.

This patch enhances acpi_debug_trace() to make it not only a message reducer,
but a real tracer to trace AML interpreter execution. Note that in addition
to the AML tracer enabling, this patch also updates the facility with the
following enhancements:
1. Allow a full path to be specified by the acpi_debug_trace() API.
2. Allow any method rather than just the entrance of acpi_evaluate_object()
   to be traced.
3. All interpreter ACPI_LV_TRACE_POINT messages are collected for
   ACPI_EXECUTER layer.

The Makefile of drivers/acpi/acpica is also updated to include exdebug.o
and the duplicated stubs are removed after that.

Note that since this patch has enhanced the method tracing facility, Linux
need also be updated after applying this patch. Lv Zheng.

Link: 07fffd02
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 23:09:07 +02:00
Lv Zheng
a616dc2fe5 ACPICA: Dispatcher: Add trace support for interpreter
ACPICA commit 71299ec8b49054daace0df50268e8e055654ca37

This patch adds trace point at the following point:
 1. Begin/end of a control method execution;
 2. Begin/end of an opcode execution.

The trace point feature can be enabled by defining ACPI_DEBUG_OUTPUT
and specifying a debug level that includes ACPI_LV_TRACDE_POINT and the
debug layers that include ACPI_PARSER and ACPI_DISPACTCHER.

In order to make aml_op_name of union acpi_parse_object usable for tracer, it is
enabled for ACPI_DEBUG_OUTPUT in this patch. Lv Zheng.

Link: 71299ec8
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 23:09:07 +02:00
Lv Zheng
0bac429552 ACPICA: Dispatcher: Move stack traversal code to dispatcher
ACPICA commit c8275e243b58fd4adfc0362bd704af41ed14bc75

This patch moves parts of acpi_dm_dump_method_info() to the dispatcher
component.

This patch also makes the new function dependent on ACPI_DEBUG_OUTPUT
compile-stage definition so that it can be used by the trace facility.

acpi_dm_dump_method_info() traverses method stack when an exception is
encountered. Such traversal is needed to support method tracing for the
exceptions. When an exception is encountered, the end indications of the
aborted methods should be logged in order not to break the user space
analysis tool. Lv Zheng.

Link: c8275e24
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 23:09:06 +02:00
Lv Zheng
d1e7ffe50b ACPICA: Namespace: Add function to directly return normalized full path
ACPICA commit 6e0229bb156d71675f2e07dc7960adb7ec0a60ea

This patch adds functions to return normalized full path instead of
"external path". The external path contains trailing "_" for each
name segment while the normalized full path doesn't contain the
trailing "_".

Currently this function is used by the method tracing users to specify a
none trailing "_" attached name path. Lv Zheng.

Note that we need to validate and switch all Linux kernel acpi_get_name()
users to use the new name type before removing the old name type from
ACPICA.

Link: 6e0229bb
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Ruiyi Zhang <ruiyi_zhang@hotmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 23:09:06 +02:00
Lv Zheng
07b9c91225 ACPICA: Executer: Add back pointing reference of method operand
ACPICA commit 9dcd124e914e87495fbd1786d9484b962e0823e0

This patch adds back pointing reference of the namespace node for a method
operand. The namespace node then can be used in
acpi_ds_terminate_control_method() to obtain method full path to be used by
tracing facilities. Lv Zheng.

Link: 9dcd124e
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 23:09:06 +02:00
Lv Zheng
62eb935b77 ACPICA: Dispatcher: Cleanup union acpi_operand_object's AML address assignments
ACPICA commit afb52611dbe7403551f93504d3798534f5c343f4

This patch cleans up the code of assigning the AML address to the
union acpi_operand_object.

The idea behind this cleanup is:
The AML address of the union acpi_operand_object should always be determined at
the point where the object is encountered. It should be started from the
first byte of the object. For example, the opcode of the object, the name
string of the user_term object, or the first byte of the packaged object
(where a pkg_length is prefixed). So it's not cleaner to have it assigned
here and there in the entire ACPICA source tree.

There are some special cases for the internal opcodes, before cleaning up
the internal opcodes, we should also determine the rules for the AML
addresses of the internal opcodes:
1. INT_NAMEPATH_OP: the address of the first byte for the name_string.
2. INT_METHODCALL_OP: the address of the first byte for the name_string.
3. INT_BYTELIST_OP: the address of the first byte for the byte_data list.
4. INT_EVAL_SUBTREE_OP: the address of the first byte for the
                        Region/Package/Buffer/bank_field/Field arguments.
5. INT_NAMEDFIELD_OP: the address to the name_seg.
6. INT_RESERVEDFIELD_OP: the address to the 0x00 prefix.
7. INT_ACCESSFIELD_OP: the address to the 0x01 prefix.
8. INT_CONNECTION_OP: the address to the 0x02 prefix.
9: INT_EXTACCESSFIELD_OP: the address to the 0x03 prefix.
10.INT_RETURN_VALUE_OP: the address of the replaced operand.
11.computational_data: the address to the
                      Byte/Word/Dword/Qword/string_prefix.

Before cleaning up the internal root scope of the aml_walk, turning it into
the term_list, we need to remember the aml_start address as the "Aml"
attribute for the union acpi_operand_object created by acpi_ps_create_scope_op().

Finally, we can delete some redundant AML address assignment in psloop.c.

Link: afb52611
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 23:09:06 +02:00
Lv Zheng
950a429cd2 ACPICA: Parser: Cleanup aml_offset in union acpi_operand_object
ACPICA commit 61b360074fde2bb8282722579410f5d1fb12f84d

This patch converts aml_offset in union acpi_operand_object to AML address.

AML offset is actually only used by the debugger, using AML address is more
direct and efficient during the parsing stage so that we don't need to
calculate the offset during the parsing stage and will not have
difficulities in converting it into other offset attributes.

Sometimes, aml_offset is not an indication of the offset from the table
header but the offset from the entry of a list of terms, which requires
additional efforts to convert it into an offset from the table header. By
using AML address directly, there is no such difficulty.
Thus this patch also deletes a logic in disassembler that is trying to
convert the aml_offset from
  "offset from the start address of Method/Package/Buffer"
into the
  "offset from the start address of the ACPI table"
(Sample code deletion can be seen in acpi_dm_deferred_parse(), but the
function is not in the Linux kernel). Lv Zheng.

Link: 61b36007
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 23:09:06 +02:00
Lv Zheng
83482f758b ACPICA: Parser: Cleanup aml_offset in struct acpi_walk_state
ACPICA commit d254405814495058276c0c2f9d96794d15a6c91c

This patch converts aml_offset in struct acpi_walk_state to AML address.

AML offset is actually only used by the debugger, using AML address is more
direct and efficient during the parsing stage so that we don't need to
calculate it during the parsing stage.

On the other hand, we can see several issues in the current parser logic
around the aml_offset:
1. union acpi_operand_object.Common.aml_offset is redundantly assigned in
   acpi_ps_parse_loop().
2. aml_offset is not an indication of the offset from the table header but
   the offset from the entry of a list of objects. Sometimes, it indicates
   an entry for a Method/Package/Buffer, which makes it difficult to be
   reversely calculated to a table header offset.
3. When being used with method tracers (for example, Linux function trace),
   it's better to have AML address logged instead of the AML offset because
   the address is the only attribute that can uniquely identify the opcode.
This patch is required to solve the above issues. Lv Zheng.

Link: d2544058
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 23:09:06 +02:00
Lv Zheng
eb87a05223 ACPICA: Parser: Reduce parser/namespace divergences for tracer support
This patch reduces divergences in parser/namespace components so that the
follow-up linuxized ACPICA upstream commits can be directly merged.
Including the fix to an indent issue reported and fixed by Zhouyi Zhou.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Zhouyi Zhou <yizhouzhou@ict.ac.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 23:09:05 +02:00
Greg Kroah-Hartman
00243b1d18 3rd round of IIO fixes for the 4.2 cycle.
* bmc150_magn - add missing regmap dependency and ensure on a wrong chip
   case report hte chip id rather than a previous return value.
 * mmc35240 - Fill a null pointer derefrence and wrong SET / RESET logic
   that results in North and South being swapped.
 * mlx96014 - correct the offset value reported to userspace (wrong sign)
 * vf610 - Prevent non aligned register reading.
 * mcp320x - Another null pointer deference bug.
 * mma8452 - change threshold type from THRESH to MAG to reflect the fact
   that the sign of the signal is not known when the event is signaled.
 * stk3310 - move device registert to end of probe to avoid race conditions
   when coming up, check for invalid client->irq values and make it work
   for both endian types of host.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVsUrgAAoJEFSFNJnE9BaI0U4P/1io/Qzbsoj0BTShAfIo4sxo
 7zdewcepjkC/X6VwyOgUsLfX9qq4HUOjCyq7HlJVgRpc34QySE0TRQY1sw72LeH8
 L5fu2GWk1U7e1+pVN6fA2xz/OY/Emus1FAIAnWI6fzfT4GCSJ3jPbnCmk7Z0c6ce
 CxJmKPGWs17eMhazhfKXu0NAP8WHGhfoUsKr5I8o1tU/gIZJck2NI4PPjGRT5tLX
 tACKXba9DIsB7vZPaSGNskvlIBDM0Wxy4RL9ZzmWxBSG63HasLmjqUv9taZf+UX/
 eYsbDGhPZwy3CVaf9xa+56juyMYrRR87p33D0bZ7gMsBtTx210WjOBtaPNkO4LyC
 KjkSKYi46iSwKIOM575wDJPw5pxUXTYZaiS4u3RZ7mDiHsPmkKe7I5/OA/zKJ91J
 /xHRkU8GXzZdDwzZjaoZ+0BO0q4feWEvOEKkJVUgE6IlLuE//+AQj0N+aMWmVyV5
 M/1SfyQFdZhovjrJtSjPkbQFl0l9QhkzBr5vt8Q2c6z2dOokxkahbNOvV1yBX7HA
 FCreFGbW4eTmNCY8a8CZ0WyOUZXj8jKBShaFkfYBBm8icgw2Zq/CXv5LeypuihzC
 MP8wmxUbKxZTBWSk4TxWMFYpWCQaGQP42TxQju8DpHQpEiKHhE6SGpX9P+3u1NRo
 Dej1LTUx5LlKzPpTXBBG
 =AEVb
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-4.2c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

3rd round of IIO fixes for the 4.2 cycle.

* bmc150_magn - add missing regmap dependency and ensure on a wrong chip
  case report hte chip id rather than a previous return value.
* mmc35240 - Fill a null pointer derefrence and wrong SET / RESET logic
  that results in North and South being swapped.
* mlx96014 - correct the offset value reported to userspace (wrong sign)
* vf610 - Prevent non aligned register reading.
* mcp320x - Another null pointer deference bug.
* mma8452 - change threshold type from THRESH to MAG to reflect the fact
  that the sign of the signal is not known when the event is signaled.
* stk3310 - move device registert to end of probe to avoid race conditions
  when coming up, check for invalid client->irq values and make it work
  for both endian types of host.
2015-07-23 13:32:05 -07:00
Linus Torvalds
d1a343a023 virtio/vhost: fixes for 4.2
Bugfixes and documentation fixes. Igor's patch that allows
 users to tweak memory table size is borderline,
 but it does fix known crashes, so I merged it.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVpBzpAAoJECgfDbjSjVRpQXEIAMEqetqPuRduynjIw2HNktle
 fe/UUhvipwTsAM4R2pmcEl5tW04A/M54RkXN4iVy0rPshAfG3Fh4XTjLmzSGU0fI
 KD6qX8/Zc/+DUWnfe3aUC6jOOrjb7c4xRKOlQ9X8lZgi2M6AzrPeoZHFTtbX34CU
 2kcnv5Sb1SaI/t2SaCc2CaKilQalEOcd59gGjje2QXjidZnIVHwONrOyjBiINUy6
 GzfTgvAje8ZiG6951W3HDwwSfcqXezin27LJqnZgaLCwTCKt2gdQ2MAKjrfP2aVF
 +gX2B4XxcFLutMVx/obsjvA1ceipubyUauRLB3mnO3P5VOj1qbofa2lj4pzQ80k=
 =EKPr
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio/vhost fixes from Michael Tsirkin:
 "Bugfixes and documentation fixes.

  Igor's patch that allows users to tweak memory table size is
  borderline, but it does fix known crashes, so I merged it"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost: add max_mem_regions module parameter
  vhost: extend memory regions allocation to vmalloc
  9p/trans_virtio: reset virtio device on remove
  virtio/s390: rename drivers/s390/kvm -> drivers/s390/virtio
  MAINTAINERS: separate section for s390 virtio drivers
  virtio: define virtio_pci_cfg_cap in header.
  virtio: Fix typecast of pointer in vring_init()
  virtio scsi: fix unused variable warning
  vhost: use binary search instead of linear in find_region()
  virtio_net: document VIRTIO_NET_CTRL_GUEST_OFFLOADS
2015-07-23 13:07:04 -07:00
Giuseppe Barba
1e9676a847 iio: st-magn: add support for lsm303agr magnetometer
This adds support for the lsm303agr magnetometer.

Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-23 20:43:27 +01:00
Giuseppe Barba
ddc05fa286 iio: st-accel: add support for lsm303agr accelerometer
This adds support for the lsm303agr accelerometer.

Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-23 20:43:22 +01:00
Giuseppe Barba
74f5683f35 iio: st_magn: Add irq trigger handling
Add irq trigger handling for magnetometer also

Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-23 20:43:13 +01:00
Giuseppe Barba
bb602f8c61 iio: st-sensors: add support for single full scale device
Some sensors could have only one full scale value. This means that the
sensor hasn't a full scale register. This commit add a check on the
configured full scale address to support such kind of sensors.

Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-23 20:43:10 +01:00
Giuseppe Barba
bc27381edb iio: st-sensors: add configuration for WhoAmI address
This patch permits to configure the WhoAmI register address
because some device could have not a standard address for
this register.

Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com>
Reviewed-by: Denis Ciocca <denis.ciocca@st.com>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-23 20:43:04 +01:00
Linus Torvalds
b681268cb2 IOMMU Fixes for Linux v4.2-rc3
The fixes include:
 
 	* A couple of fixes for the new ARM-SMMUv3 driver to fix issues found
 	  on the first real implementation of that hardware.
 
 	* A patch for the Intel VT-d driver to fix a domain-id leak.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJVsRnaAAoJECvwRC2XARrjl1IQANRhxppbl3HgCj8rB7z4rsoL
 VFWGcGHZGPBQ8roTp687U2l7nXnqLaFWswVgAkz0+Bao/HdySOFD93do2JX0TdBt
 nvPVTsoVDKLhatLrud1FwD6JIWpBEh/gwnXsJm6UBCWkk4iSnyMlhOzrWNMBvjyH
 z8jBv4DZa0LtYXqa8CWacKJZjv3k3/SjvYJdhBY5H4VaAC1azSqIDCJbPW6Oybi8
 I3+lidZvHnRPA8JLF+VNee62q9qwmbftw+HZ4UZD4fGHsCFtGr9Fdux/Ec4Lwqvt
 vlVqn2i8RssUg7KIzUUkWUnQGe21/+9th/A7G7t7qXoSG9wm1ICkDbWRUtT7hkrD
 2YV32kzn95F6dOmKdki3o/rt1MgzfV9TVGG5VmkkvZp7MzEvx41zM8pQIS42K11G
 xVciVlrR3Z03DMqwK+j/6Tk+CMtxfzoWodXkTUwMwnHmxFc8G+6z6sQplmeUVpoj
 rABSXbubUQnzM8vmf7tvlUBpz0eAMfB2Y7hAeJv/iigySjT3kUZ3R6sgSWLhUrec
 yDFugwnAlICroNG9tsODTDf5T9+Z3XwsIrOl4Vc8mhGTwms6/7kfFziTFeViAUm4
 rCKZ2619PW2JcMBrFQx7CSCCp27wsk+EkLnZ0WmSaSUrlxHx65T+bbWU/UMShTQM
 S1rZcEFKstSrN/ybUIRD
 =zWOU
 -----END PGP SIGNATURE-----

Merge tag 'iommu-fixes-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:
 "The fixes include:

   - a couple of fixes for the new ARM-SMMUv3 driver to fix issues found
     on the first real implementation of that hardware.

   - a patch for the Intel VT-d driver to fix a domain-id leak"

* tag 'iommu-fixes-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix VM domain ID leak
  iommu/arm-smmu: Skip the execution of CMD_PREFETCH_CONFIG
  iommu/arm-smmu: Enlarge STRTAB_L1_SZ_SHIFT to support larger sidsize
  iommu/arm-smmu: Fix the values of ARM64_TCR_{I,O}RGN0_SHIFT
  iommu/arm-smmu: Fix LOG2SIZE setting for 2-level stream tables
  iommu/arm-smmu: Fix the index calculation of strtab
2015-07-23 12:25:44 -07:00
Octavian Purdila
c176becd81 iio: fix drivers that consider 0 as a valid IRQ in client->irq
Since patch "i2c / ACPI: Use 0 to indicate that device does not have
interrupt assigned" [1], 0 is not a valid i2c client irq anymore, so
change all driver's checks accordingly.

The same issue occurs when the device is instantiated via device tree
with no IRQ, or from the i2c sysfs interface, even before the patch
above.

[1] http://lkml.kernel.org/g/<1430908148-201129-3-git-send-email-mika.westerberg@linux.intel.com>

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-23 20:23:11 +01:00
Alex Deucher
acc6a1a69b drm/amdgpu/cz/dpm: properly report UVD and VCE clock levels
VCE, UVD DPM work similarly to SCLK DPM.  Report the current
clock levels for UVD and VCE via debugfs.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-07-23 15:10:32 -04:00
Alex Deucher
f2d52cd4db drm/amdgpu/cz: implement voltage validation properly
CZ uses a different set of registers compared to previous asics
and supports separate NB and GFX planes.

Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-07-23 15:09:27 -04:00
Lee Jones
742e40978f rtc: st: Update IP layout information to include Clocksource
Initial submission adding support for this IP only included Watchdog and
the Real-Time Clock.  Now the third (and final) device is enabled this
trivial patch is required to update the comment in the RTC driver to
encompass Clocksource.

Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-23 17:07:35 +01:00
Lee Jones
ff45d8dd84 clocksource: sti: Provide 'use timer as sched clock' capability
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-23 17:07:26 +01:00
Lee Jones
70bef01c0f clocksource: sti: Provide support for the ST LPC Clocksource IP
This IP is shared with Watchdog and RTC functionality.  All 3 of
these devices are mutually exclusive from one another i.e. Only 1
IP can be used at any given time.  We use the device-driver model
combined with a DT 'mode' property to enforce this.

The ST LPC Clocksource IP can be used as the system (tick) timer.

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-23 17:07:00 +01:00
Lorenzo Pieralisi
dff22d2054 PCI: Call pci_read_bridge_bases() from core instead of arch code
When we scan a PCI bus, we read PCI-PCI bridge window registers with
pci_read_bridge_bases() so we can validate the resource hierarchy.  Most
architectures call pci_read_bridge_bases() from pcibios_fixup_bus(), but
PCI-PCI bridges are not arch-specific, so this doesn't need to be in
arch-specific code.

Call pci_read_bridge_bases() directly from the PCI core instead of from
arch code.

For alpha and mips, we now call pci_read_bridge_bases() always; previously
we only called it if PCI_PROBE_ONLY was set.

[bhelgaas: changelog]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Ralf Baechle <ralf@linux-mips.org>
CC: James E.J. Bottomley <jejb@parisc-linux.org>
CC: Michael Ellerman <mpe@ellerman.id.au>
CC: Bjorn Helgaas <bhelgaas@google.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: David Howells <dhowells@redhat.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: Tony Luck <tony.luck@intel.com>
CC: David S. Miller <davem@davemloft.net>
CC: Ingo Molnar <mingo@redhat.com>
CC: Guenter Roeck <linux@roeck-us.net>
CC: Michal Simek <monstr@monstr.eu>
CC: Chris Zankel <chris@zankel.net>
2015-07-23 10:13:29 -05:00
Antonio Borneo
fc586c4111 net: ieee802154: Remove redundant spi driver bus initialization
In ancient times it was necessary to manually initialize the bus
field of an spi_driver to spi_bus_type. These days this is done in
spi_register_driver(), so we can drop the manual assignment.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Acked-by: Varka Bhadram <varkabhadram@gmail.com>
Acked-by: Alan Ott <alan@signal11.us>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-23 17:10:51 +02:00
Prasanna Karthik
f104f06c1b Bluetooth: bt3c_cs: Fix coding style
Remove semicolon in switch statement, reported by coccinelle

Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-23 17:10:50 +02:00
Marcel Holtmann
7feb99e130 Bluetooth: btintel: Create common function for Intel version info
The Intel version information is shared between USB and UART drivers
and with that move it into a generic function of the Intel module.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-07-23 17:10:50 +02:00
Marcel Holtmann
09df123d2d Bluetooth: btintel: Create common Intel Secure Send function
The Intel Secure Send command is used the same in USB and UART drivers
and with that move a generic version into the Intel module.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-07-23 17:10:50 +02:00
Marcel Holtmann
35ab8150ee Bluetooth: hci_uart: Add Intel address configuration support
The Intel specific Bluetooth module provides support for pubic address
configuration. So make sure that it is enabled for Intel UART devices.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-07-23 17:10:50 +02:00
Marcel Holtmann
eeb6abe973 Bluetooth: btusb: Use hardware error handler from Intel module
The Intel specific Bluetooth module provides now an exported function
for the hardware error. Use that instead of duplicating it inside the
driver.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-07-23 17:10:50 +02:00
Marcel Holtmann
973bb97e5a Bluetooth: btintel: Add generic function for handling hardware errors
The handling of hardware error has support for providing a vendor
specific callback to deal with the error. Move the Intel specific
function out of the USB driver into the generic module so that it
can also be utilized by the UART driver.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-07-23 17:10:49 +02:00
Prasanna Karthik
20a7e25f4e Bluetooth: dtl1_cs: Fixed coding style
Removed semicolon at end of switch statement,error reported by Coccinelle

Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-23 17:10:49 +02:00
Prasanna Karthik
a03e33da5f Bluetooth: bfusb: Coding style fix reported by coccinelle
Removed semicolon at the end of switch case statement

Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-23 17:10:49 +02:00
Loic Poulain
ca93cee5a5 Bluetooth: hci_uart: Add basic support for Intel Lightning Peak devices
The Intel Lightning Peak devices do not come with Bluetooth firmware
loaded and thus require a full download of the operational Bluetooth
firmware when the device is attached via the Bluetooth line discipline.

Lightning Peak devices start with a bootloader mode that only accepts
a very limited set of HCI commands. The supported commands are enough
to identify the hardware and select the right firmware to load.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-23 17:10:49 +02:00
Prasanna Karthik
fac5e5b912 Bluetooth: dtl1_cs: Fix coding style -- clean up
Braces {} are not necessary for single statement blocks reported by
checkpatch

Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-23 17:10:48 +02:00
Leo Liu
fa92754e9c drm/amdgpu: add VCE harvesting instance query
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
2015-07-23 11:09:45 -04:00
Alex Deucher
6a585777c8 drm/amdgpu: implement VCE 3.0 harvesting support (v4)
For boards with bad VCE blocks, only configure the working
block.

v2: use the harvest info for pipe setup
v3: fix mask check as noted by Leo
v4: add dGPU support

Reviewed-by: Christian König <christian.koenig@amd.com> (v2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-07-23 11:09:44 -04:00
Michel Dänzer
5e6775abb5 drm/amdgpu/dce10: Re-set VBLANK interrupt state when enabling a CRTC
This doesn't seem strictly necessary with Tonga right now, but that might
change with future power management enhancements.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
2015-07-23 11:09:43 -04:00
Michel Dänzer
d84b272a12 drm/amdgpu/dce11: Re-set VBLANK interrupt state when enabling a CRTC
Something (ATOM BIOS?) seems to be clobbering the LB_INTERRUPT_MASK
register while the CRTC is off, which caused e.g. glxgears or
gnome-shell to hang after a modeset.

Reviewed-and-Tested-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
2015-07-23 11:09:43 -04:00