Commit graph

287,481 commits

Author SHA1 Message Date
Shreyas Bhatewara
a694717437 vmxnet3: Bump up driver version number
Bump up the driver version number to reflect the changes done to
work with vmxnet3 adapter version 2

Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-29 09:27:45 -07:00
Tom Lendacky
472cfe7127 amd-xgbe: Add the __GFP_NOWARN flag to Rx buffer allocation
When allocating Rx related buffers, alloc_pages is called using an order
number that is decreased until successful. A system under stress can
experience failures during this allocation process resulting in a warning
being issued. This message can be of concern to end users even though the
failure is not fatal. Since the failure is not fatal and can occur
multiple times, the driver should include the __GFP_NOWARN flag to
suppress the warning message from being issued.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-29 09:27:03 -07:00
Sonny Jiang
9dcabece15 drm/amdgpu: disable enable_nb_ps_policy temporarily
Fixes a hang on resume.

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29 11:21:53 -04:00
Sonny Jiang
966c62fb40 drm/amdgpu: correct define SMU_EnabledFeatureScoreboard_SclkDpmOn
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29 11:21:52 -04:00
Alex Deucher
d8d090b711 drm/amdgpu: allocate ip_block_enabled memory in common code
Remove duplication across asic families and make it symmetric
with the freeing of the code in amdgpu_device.c

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29 11:21:52 -04:00
Maninder Singh
a08c1d516f drm/amdgpu: remove unnecessary check before kfree
kfree(NULL) is safe and this check is probably not required

Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Vaneet Narang <v.narang@samsung.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29 11:21:51 -04:00
Maninder Singh
5f0b34cc72 drm/amdgpu: use kzalloc for allocating one thing
Use kzalloc rather than kcalloc(1.. for allocating
one thing.

Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Vaneet Narang <v.narang@samsung.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29 11:21:50 -04:00
Christian König
b13e22aeba drm/radeon: fix adding all VAs to the freed list on remove v2
We only should do so when the BO_VA was actually mapped.
Otherwise we get a nice error message on the next CS.

v2: It actually doesn't matter if it was invalidated or not,
    if it was mapped we need to clear the area where it was mapped.

Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29 11:21:50 -04:00
Christian König
9a5e8fb1c8 drm/amdgpu: add chunk id validity check
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29 11:21:49 -04:00
Christian König
b8682ac253 drm/amdgpu: fix crash on invalid CS IOCTL
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29 11:21:49 -04:00
Sonny Jiang
845253e78a drm/amdgpu: reset wptr at cp compute resume (v2)
This patch is to resolve compute hang at resume time.

v2: (agd5f) squash in second fix

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
2015-06-29 11:21:48 -04:00
Christian König
dc78330a8e drm/amdgpu: check VCE feedback and bitstream index
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
2015-06-29 11:21:47 -04:00
Christian König
2f4b936869 drm/amdgpu: make VCE handle check more strict
Port of radeon commit 29c63fe22a.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
2015-06-29 11:21:47 -04:00
Christian König
f1689ec1b0 drm/amdgpu: check VCE relocation buffer range
port of radeon commit 2fc5703abd.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
2015-06-29 11:21:46 -04:00
Christian König
68fdd3df79 drm/amdgpu: silence invalid error message
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
2015-06-29 11:21:45 -04:00
monk.liu
332300b97e drm/amdgpu: fix wrong type
Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
2015-06-29 11:21:45 -04:00
Christian König
e30590e6e3 drm/amdgpu: print the bo_list in the CS trace point as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <aleander.deucher@amd.com>
2015-06-29 11:21:44 -04:00
Christian König
ec74407ac0 drm/amdgpu: add amdgpu_bo_list_set trace point
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <aleander.deucher@amd.com>
2015-06-29 11:21:43 -04:00
Christian König
93e3e4385b drm/amdgpu: add BO map/unmap trace point
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <aleander.deucher@amd.com>
2015-06-29 11:21:43 -04:00
Christian König
344c19f955 drm/amdgpu: simplify fence debugfs output a bit
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <aleander.deucher@amd.com>
2015-06-29 11:21:42 -04:00
Jérôme Glisse
2ba8d1bb8f drm/radeon: SDMA fix hibernation (CI GPU family).
In order for hibernation to reliably work we need to properly turn
off the SDMA block, sadly after numerous attemps i haven't not found
proper sequence for clean and full shutdown. So simply reset both
SDMA block, this makes hibernation works reliably on sea island GPU
family (CI)

Hibernation and suspend to ram were tested (several times) on :
Bonaire
Hawaii
Mullins
Kaveri
Kabini

Cc: stable@vger.kernel.org
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29 11:21:41 -04:00
Jérôme Glisse
161569deaa drm/radeon: compute ring fix hibernation (CI GPU family) v2.
In order for hibernation to reliably work we need to cleanup more
thoroughly the compute ring. Hibernation is different from suspend
resume as when we resume from hibernation the hardware is first
fully initialize by regular kernel then freeze callback happens
(which correspond to a suspend inside the radeon kernel driver)
and turn off each of the block. It turns out we were not cleanly
shutting down the compute ring. This patch fix that.

Hibernation and suspend to ram were tested (several times) on :
Bonaire
Hawaii
Mullins
Kaveri
Kabini

Changed since v1:
  - Factor the ring stop logic into a function taking ring as arg.

Cc: stable@vger.kernel.org
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29 11:21:41 -04:00
Ben Goz
78ad5cdd21 drm/amdgpu: Configure doorbell to maximum slots
Signed-off-by: Ben Goz <ben.goz@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29 11:21:40 -04:00
Ben Goz
cd06bf687b drm/amdgpu: Initialize compute sdma and memory from kgd
v2: add missing MTYPE_NONCACHED enum

Signed-off-by: Ben Goz <ben.goz@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29 11:21:39 -04:00
Maninder Singh
69ee241023 drm/radeon: use kzalloc for allocating one thing
Use kzalloc for allocating one thing rather than
kcalloc(1...

The semantic patch that makes this change is as follows:

// <smpl>
@@
@@

- kcalloc(1,
+ kzalloc(
          ...)
// </smpl>

Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Vaneet Narang <v.narang@samsung.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29 11:21:39 -04:00
Alex Deucher
e922cfb1c4 drm/amdgpu: fix hpd range check in dce_v8_0_hpd_irq()
Spotted by Dan Carpenter.  This is a slight variant of
his fix.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29 11:21:38 -04:00
Markus Elfring
4b8a826208 HID: picoLCD: Deletion of unnecessary checks before three function calls
The functions backlight_device_unregister(), lcd_device_unregister() and
rc_unregister_device() test whether their argument is NULL and then
return immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-06-29 14:51:12 +02:00
Reyad Attiyat
c5b2b809ce HID: microsoft: Add quirk for MS Surface Type/Touch cover
The newer firmware on MS Surface 2 tablets causes the type and touch cover keyboards to timeout when waiting for reports.
The quirk HID_QUIRK_NO_INIT_REPORTS allows them to function normally.

Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-06-29 14:28:25 +02:00
Jani Nikula
2059ac3b13 drm/i915: fix backlight after resume on 855gm
Some 855gm models (at least ThinkPad X40) regressed because of

commit b0cd324fae
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Wed Nov 12 16:25:43 2014 +0200

    drm/i915: don't save/restore backlight hist ctl registers

which tried to make our driver more robust by not blindly saving and
restoring registers, but it failed to take into account

commit 0eb96d6ed3
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Wed Oct 14 12:33:41 2009 -0700

    drm/i915: save/restore BLC histogram control reg across suspend/resume

Fix the regression by enabling hist ctl on gen2.

v2: Improved the comment.

v3: Improved the comment, again.

Reported-and-tested-by: Philipp Gesang <phg@phi-gamma.net>
References: http://mid.gmane.org/20150623222648.GD12335@acheron
Fixes: b0cd324fae ("drm/i915: don't save/restore backlight hist ctl registers")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-29 14:31:04 +03:00
Chris Wilson
8b572a4200 agp/intel: Fix typo in needs_ilk_vtd_wa()
In needs_ilk_vtd_wa(), we pass in the GPU device but compared it against
the ids for the mobile GPU and the mobile host bridge. That latter is
impossible and so likely was just a typo for the desktop GPU device id
(which is also buggy).

Fixes commit da88a5f7f7
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Wed Feb 13 09:31:53 2013 +0000

    drm/i915: Disable WC PTE updates to w/a buggy IOMMU on ILK

Reported-by: Ting-Wei Lan <lantw44@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91127
References: https://bugzilla.freedesktop.org/show_bug.cgi?id=60391
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-29 14:26:09 +03:00
Jean-Baptiste Theou
5e53c8ed81 watchdog: gpio_wdt: Add option for early registration
In some situation, mainly when it's not possible to disable a
watchdog, you may want the watchdog driver to be started as soon
as possible.

Adding GPIO_WATCHDOG_ARCH_INITCALL to raise initcall from
module_init to arch_initcall.

This patch require watchdog registration deferral mechanism

Signed-off-by: Jean-Baptiste Theou <jtheou@adeneo-embedded.us>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-29 11:51:08 +02:00
Jean-Baptiste Theou
ef90174f82 watchdog: watchdog_core: Add watchdog registration deferral mechanism
Currently, watchdog subsystem require the misc subsystem to
register a watchdog. This may not be the case in case of an
early registration of a watchdog, which can be required when
the watchdog cannot be disabled.

This patch introduces a deferral mechanism to remove this requirement.

Signed-off-by: Jean-Baptiste Theou <jtheou@adeneo-embedded.us>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-29 11:51:06 +02:00
Vivien Didelot
b9be9660ba watchdog: max63xx: dynamically allocate device
This patch removes the static watchdog device for a new max63xx_wdt data
structure, and constifies the max63xx_timeout data.

The new structure contains pointers to pin access routines, which
abstracts mmap-specific code. This will ease future accesses like GPIO.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-29 11:50:53 +02:00
Ville Syrjälä
2cb389b7e4 drm/i915: Zero unused WM1 watermarks on VLV/CHV
The hardware supposedly ignores the WM1 watermarks while the PND
deadline mode is enabled, but clear out the register just in case.
This is what the other OS does, and it does make register dumps look
more consistent when we don't have partial WM1 values lingering in
the registers (some WM1 watermarks already get zeroed when the actually
used DSPFW registers get written).

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-29 11:00:11 +02:00
Ville Syrjälä
de38b95cbb drm/i915: Add debugfs knobs for VLVCHV memory latency values
Allow tweaking the VLV/CHV memory latencies thorugh sysfs, like we do
for ILK+.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-29 10:59:48 +02:00
Ville Syrjälä
6f9c784b7e drm/i915: Don't do PM5/DDR DVFS with multiple pipes
Enabling PM5/DDR DVFS with multiple active pipes isn't a validated
configuration. It does seem to work most of the time at least, but
there is clearly an additional risk of underruns, so let's not play
with fire.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-29 10:59:26 +02:00
Ville Syrjälä
852eb00dc4 drm/i915: Try to make sure cxsr is disabled around plane enable/disable
CxSR (or maxfifo on VLV/CHV) blocks somne changes to the plane control
register (enable bit at least, not quite sure about the rest). So in
order to have the plane enable/disable when we want we need to first
kick the hardware out of cxsr.

Unfortunateloy this requires some extra vblank waits. For the CxSR
enable after the plane update we should eventually use an async
vblank worker, but since we don't have that just do sync vblank
waits. For the disable case we have no choice but to do it
synchronously.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-29 10:58:07 +02:00
Ville Syrjälä
26e1fe4fbd drm/i915: Use the memory latency based WM computation on VLV too
In order to get decnet memory self refresh residency on VLV, flip it
over to the new CHV way of doing things. VLV doesn't do PM5 or DDR DVFS
so it's a bit simpler.

I'm not sure the currently memory latency used for CHV is really
appropriate for VLV. Some further testing will probably be needed to
figure that out.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-29 10:56:03 +02:00
Ville Syrjälä
54f1b6e15d drm/i915: Compute display FIFO split dynamically for CHV
Consider which planes are active and compute the FIFO split based on the
relative data rates. Since we only consider the pipe src width rather
than the plane width when computing watermarks it seems best to do the
same when computing the FIFO split as well. This means the only thing we
actually have to consider for the FIFO splut is the bpp, and we can
ignore the rest.

I've just stuffed the logic into the watermark code for now. Eventually
it'll need to move into the atomic update for the crtc.

There's also one extra complication I've not yet considered; Some of the
DSPARB registers contain bits related to multiple pipes. The registers
are double buffered but apparently they update on the vblank of any
active pipe. So doing the FIFO reconfiguration properly when multiple
pipes are active is not going to be fun. But let's ignore that mess for
now.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-29 10:55:52 +02:00
Ville Syrjälä
262cd2e154 drm/i915: CHV DDR DVFS support and another watermark rewrite
Turns out the VLV/CHV system agent doesn't understand memory
latencies, so trying to rely on the PND deadline mechanism is not
going to fly especially when DDR DVFS is enabled. Currently we try to
avoid the problems by lying to the system agent about the deadlines
and setting the FIFO watermarks to 8 cachelines. This however leads to
bad memory self refresh residency.

So in order to satosfy everyone we'll just give up on the deadline
scheme and program the watermarks old school based on the worst case
memory latency.

I've modelled this a bit on the ILK+ approach where we compute multiple
sets of watermarks for each pipe (PM2,PM5,DDR DVFS) and when merge thet
appropriate one later with the watermarks from other pipes. There isn't
too much to merge actually since each pipe has a totally independent
FIFO (well apart from the mess with the partially shared DSPARB
registers), but still decopuling the pipes from each other seems like a
good idea.

Eventually we'll want to perform the watermark update in two phases
around the plane update to avoid underruns due to the single buffered
watermark registers. But that's still in limbo for ILK+ too, so I've not
gone that far yet for VLV/CHV either.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-29 10:55:13 +02:00
Ville Syrjälä
6eb1a68172 drm/i915: Read wm values from hardware at init on CHV
Read out the current watermark settings from the hardware at driver init
time. This will allow us to compare the newly calculated values against
the currrent ones and potentially avoid needless WM updates.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-29 10:55:05 +02:00
Ville Syrjälä
f015c55188 drm/i915: Split atomic wm update to pre and post variants
Try to update the watermarks on the right side of the plane update. This
is just a temporary hack until we get the proper two part update into
place. However in the meantime this might have some chance of at least
working.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-29 10:51:54 +02:00
Ville Syrjälä
a7a6c49892 drm/i915: POSTING_READ() in intel_set_memory_cxsr()
We want cxsr exit to happen ASAP, so toss in some POSTING_READ()s to
make sure things are really kicked off.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-29 10:48:37 +02:00
Daniel Vetter
031b698a77 drm/i915: Unconditionally do fb tracking invalidate in set_domain
We can't elide the fb tracking invalidate if the buffer is already in
the right domain since that would lead to missed screen updates. I'm
pretty sure I've written this already before but must have gotten lost
unfortunately :(

v2: Chris observed that all internal set_domain users already
correctly do the fb invalidate on their own, hence we can move this
just into the set_domain ioctl instead.

v3: I screwed up setting the invalidate ORIGIN_* correctly (Chris).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-29 10:46:45 +02:00
Rodrigo Vivi
066cf55b9c drm/i915: Fix IPS related flicker
We cannot let IPS enabled with no plane on the pipe:

BSpec: "IPS cannot be enabled until after at least one plane has
been enabled for at least one vertical blank." and "IPS must be
disabled while there is still at least one plane enabled on the
same pipe as IPS." This restriction apply to HSW and BDW.

However a shortcut path on update primary plane function
to make primary plane invisible by setting DSPCTRL to 0
was leting IPS enabled while there was no
other plane enabled on the pipe causing flickerings that we were
believing that it was caused by that other restriction where
ips cannot be used when pixel rate is greater than 95% of cdclok.

v2: Don't mess with Atomic path as pointed out by Ville.

v3: Rebase after a long time and atomic path changes.
    Accept Ville suggestion of not check !fb

v4: Re-factore on dinq

Reference: https://bugs.freedesktop.org/show_bug.cgi?id=85583
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Kenneth Graunke <kenneth@whitecape.org>
[danvet: Make it compile]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-29 10:46:37 +02:00
Markus Elfring
12a4bd3122 crypto: qat - Deletion of unnecessary checks before two function calls
The functions kfree() and release_firmware() test whether their argument
is NULL and then return immediately.
Thus the test around the calls is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-29 16:06:29 +08:00
Florian Fainelli
d8e704e461 net: phy: mdio-bcm-unimac: workaround initial read failures for integrated PHYs
All BCM7xxx integrated Gigabit PHYs have an issue in their MDIO
management controller which will make the initial read or write to them
to fail and return 0xffff. This is a real issue as the typical first
thing we do is read from MII_PHYSID1 and MII_PHYSID2 from get_phy_id()
to register a driver for these PHYs.

Coupled with the workaround in drivers/net/phy/bcm7xxx.c, this
workaround for the MDIO bus controller consists in scanning the list of
PHYs to do this initial read workaround for as part of the MDIO bus
reset routine which is invoked prior to mdiobus_scan().

Once we have a proper PHY driver/device registered, all workarounds are
located there (e.g: power management suspend/resume calls).

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28 20:28:20 -07:00
Florian Fainelli
7b635da868 net: bcmgenet: workaround initial read failures for integrated PHYs
All BCM7xxx integrated Gigabit PHYs have an issue in their MDIO
management controller which will make the initial read or write to them
to fail and return 0xffff. This is a real issue as the typical first
thing we do is read from MII_PHYSID1 and MII_PHYSID2 from get_phy_id()
to register a driver for these PHYs.

Coupled with the workaround in drivers/net/phy/bcm7xxx.c, this
workaround for the MDIO bus controller consists in scanning the list of
PHYs to do this initial read workaround for as part of the MDIO bus
reset routine which is invoked prior to mdiobus_scan().

Once we have a proper PHY driver/device registered, all workarounds are
located there (e.g: power management suspend/resume calls).

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28 20:28:20 -07:00
Florian Fainelli
8e346e1594 net: phy: bcm7xxx: workaround MDIO management controller initial read
The initial MDIO read or write towards the BCM7xxx integrated PHY may
fail, workaround this by inserting a dummy MII_BMSR read to force the
MDIO management controller to see at least one valid transaction and get
out of stuck state out of reset.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28 20:28:20 -07:00
Michal Schmidt
8031612d7f bnx2x: fix DMA API usage
With CONFIG_DMA_API_DEBUG=y bnx2x triggers the error "DMA-API: device
driver frees DMA memory with wrong function".
On archs where PAGE_SIZE > SGE_PAGE_SIZE it also triggers "DMA-API:
device driver frees DMA memory with different size".

Fix this by making the mapping and unmapping symmetric:
 - Do not map the whole pool page at once. Instead map the
   SGE_PAGE_SIZE-sized pieces individually, so they can be unmapped in
   the same manner.
 - What's mapped using dma_map_page() must be unmapped using
   dma_unmap_page().

Tested on ppc64.

Fixes: 4cace675d6 ("bnx2x: Alloc 4k fragment for each rx ring buffer element")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28 20:25:01 -07:00