Commit graph

287,481 commits

Author SHA1 Message Date
preeti
cc5a2f7b8f tick/idle/powerpc: Do not register idle states with CPUIDLE_FLAG_TIMER_STOP set in periodic mode
On some archs, the local clockevent device stops in deep cpuidle states.
The broadcast framework is used to wakeup cpus in these idle states, in
which either an external clockevent device is used to send wakeup ipis
or the hrtimer broadcast framework kicks in in the absence of such a
device. One cpu is nominated as the broadcast cpu and this cpu sends
wakeup ipis to sleeping cpus at the appropriate time. This is the
implementation in the oneshot mode of broadcast.

In periodic mode of broadcast however, the presence of such cpuidle
states results in the cpuidle driver calling tick_broadcast_enable()
which shuts down the local clockevent devices of all the cpus and
appoints the tick broadcast device as the clockevent device for each of
them. This works on those archs where the tick broadcast device is a
real clockevent device.  But on archs which depend on the hrtimer mode
of broadcast, the tick broadcast device hapens to be a pseudo device.
The consequence is that the local clockevent devices of all cpus are
shutdown and the kernel hangs at boot time in periodic mode.

Let us thus not register the cpuidle states which have
CPUIDLE_FLAG_TIMER_STOP flag set, on archs which depend on the hrtimer
mode of broadcast in periodic mode. This patch takes care of doing this
on powerpc. The cpus would not have entered into such deep cpuidle
states in periodic mode on powerpc anyway. So there is no loss here.

Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: 3.19+ <stable@vger.kernel.org> # 3.19+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-26 03:28:49 +02:00
Linus Torvalds
da996f7310 edac updates for v4.2-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVjFrRAAoJEAhfPr2O5OEVD70P/A17My+ABfqme1snLyJuiQsz
 Uuu1JpS4ZcCxEdc4J/nCxexlbwr7b5/2bkSWASIQaOYMOcgM7CkBs5Z7fIDjpgOt
 UMCMCnmVW6A/nMeVKfmcDri0BDzW73Yt8jT8Urtp4yz0k5wRV5fBHHK0JH2l8Zj6
 ND9KPJQqA96cshe4TiLBJj+stZhRJhPG/FeQ5GwTs6j4mn+lyu7bGJ/V5h45iYkG
 6frYP8UJMYR6g1VXl3ohTlyBJfEFdoG5Uz0H5oyqfRuFJtEuXNSCQVy2xWscBUc5
 A4l/brTXXDhHgo6mq7tFDO2BldiIMWHZhLbDvzoAlVOK5s14q30DhSF8q25CP3+t
 uszwV6mihGerr1VjUEm3n1Uus5wuAXsgn75k1dnqbL/3aut0UYkOS9skml3ioWiV
 PQB+Ix3Bjz7k9Hwi4Rd2KZEhwvPAWXBKyRjScq9DYjo3+Er8ClgoJTcADiYXPTRM
 ctR2WY6PLkMhTdePBMJbK51ZljMGKZj0boDFHofZceQWVaDod8dSFn5HFjQkc3nu
 Ty9Qb3LMDPZeensVg5bOlIgXsLoUoo7zlwhdxVRAyc6duSJndKAJoQL6l1RTvXYM
 UQbEdMQZURGzTRyGui+tX9+NBER0n7mJtw9qUKWaxi3GlTGH8ETg/ga0COM0SEkD
 Ax+ZvqYeyJSh4/F2nGFV
 =bjTk
 -----END PGP SIGNATURE-----

Merge tag 'edac/v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac

Pull edac updates from Mauro Carvalho Chehab:
 "Some fixes and additions to the EDAC driver used on modern Intel x86
  CPUs.  It includes support for Broadwell EP/EX platforms and fixes for
  motherboards with more than 2 CPU sockets"

* tag 'edac/v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  sb_edac: support for Broadwell -EP and -EX
  sb_edac: Fix support for systems with two home agents per socket
  sb_edac: Fix a typo and a thinko in address handling for Haswell
  EDAC: Remove arbitrary limit on number of channels
2015-06-25 18:22:20 -07:00
Linus Torvalds
5b4ca44477 media updates for v4.2-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVi+2qAAoJEAhfPr2O5OEVJdUP/2JzjQ17fswt4JCqXZRMjSZi
 ZZThdFY5Cirs4lKovigTsBwoFFf0nZ5ti+8MpbrglKUBRQTOwWXP/KrJt4hCCikD
 nkcEPkATqlhCYNqxI/6TgUgvVODmTO6PtLbWYpnW64zi9zq0FM4Ko1h+s8ynB91O
 UeDXbn00G2ifMo9BXuzyms+uW7f1LI0+Fqhwf3t9QrO8DTjjEU5Km9teUPMrJmgn
 rcfCrj4c3uDX4Wh4xe1DEs6T7Cf6qRKG5BLjwm6uNO3RMsZ5sA6tgCdE6FonhGrF
 Kvso2NCLQggZg6mgvMXoazYmaqxeeXsy06GBkmrQ9Xx6jo5z+nyJAWwVn7awdt7R
 89CWWn9MRrjhG3QLiluacJaH/5Z+fULSe6Stg2AVqfQGy/EwE7N2BR1CqO0i4pbN
 PredVtT77wyuDfUg6cYgJNjhhCcSt2i71X5Wt42rCZMylTGg3vWq//RqLo7xReaz
 XC0uhrJRDnF02BMzwQftUa8+UTn8Ozb7OyV91DzmZq9njsVHLAyY5u5Q/Fye5buH
 4Ejcjou3edVPMKu7aBtOt4Bmnwc03jBLTlMTdBMeHQugaj3aTP7G7EcX2UAGq4SK
 2e5GaYyIaAvpiddhBJzSzzd8u+XtRynKtFvfWnR+wTnILC+w+nfM/PbthVlXNJZx
 4sUv1XmWxbJT3T7wJ8xE
 =iJ/U
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - Lots of improvements at the DVB API DocBook documentation.  Now, the
   frontend and the network APIs are fully in sync with the Kernel and
   looks more like the rest of the media documentation;

 - New frontend driver: cx24120

 - New driver for a PCI device: cobalt.  This driver is actually not
   sold in the market, but it is a good example of a multi-HDMI input
   device;

 - The dt3155 driver were promoted from staging;

 - The mantis driver got remote controller support;

 - New V4L2 driver for ST bdisp SoC chipsets;

 - Make sparse and smatch happier: several bugs were solved by fixing
   the issues reported by those static code analyzers.

 - Lots of new device additions, new features, improvements and cleanups
   at the existing drivers.

* tag 'media/v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (553 commits)
  [media] lmedm04: fix the range for relative measurements
  [media] lmedm04: use u32 instead of u64 for relative stats
  [media] omap3isp: remove unused var
  [media] saa7134: fix page size on some archs
  [media] use CONFIG_PM_SLEEP for suspend/resume
  [media] tuner-i2c: be consistent with I2C declaration
  [media] si470x: cleanup define namespace
  [media] bdisp: prevent compiling on random arch
  [media] vb2: Don't WARN when v4l2_buffer.bytesused is 0 for multiplanar buffers
  [media] MAINTAINERS: Add entry for the Renesas VSP1 driver
  [media] videodev2.h: fix copy-and-paste error in V4L2_MAP_XFER_FUNC_DEFAULT
  [media] Revert "[media] vb2: Push mmap_sem down to memops"
  [media] mantis: cleanup a warning
  [media] bdisp-debug: don't try to divide by s64
  [media] cx88: don't declare restart_video_queue if not used
  [media] au0828: move dev->boards atribuition to happen earlier
  [media] lmedm04: implement dvb v5 statistics
  [media] bdisp: remove unused var
  [media] bdisp: remove needless check
  ts2020: fix compilation on i386
  ...
2015-06-25 17:55:48 -07:00
Linus Torvalds
0db9723cac Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
 "Specifics:

   - enhance Thermal Framework with several new capabilities:

       * use power estimates
       * compute weights with relative integers instead of percentages
       * allow governors to have private data in thermal zones
       * export thermal zone parameters through sysfs

     Thanks to the ARM thermal team (Javi, Punit, KP).

   - introduce a new thermal governor: power allocator.  First in kernel
     closed loop PI(D) controller for thermal control.  Thanks to ARM
     thermal team.

   - enhance OF thermal to allow thermal zones to have sustainable power
     HW specification.  Thanks to Punit.

   - introduce thermal driver for Intel Quark SoC x1000platform.  Thanks
     to Ong, Boon Leong.

   - introduce QPNP PMIC temperature alarm driver.  Thanks to Ivan T. I.

   - introduce thermal driver for Hisilicon hi6220.  Thanks to
     kongxinwei.

   - enhance Exynos thermal driver to handle Exynos5433 TMU.  Thanks to
     Chanwoo C.

   - TI thermal driver now has a better implementation for EOCZ bit.
     From Pavel M.

   - add id for Skylake processors in int340x processor thermal driver.

   - a couple of small fixes and cleanups."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (36 commits)
  thermal: hisilicon: add new hisilicon thermal sensor driver
  dt-bindings: Document the hi6220 thermal sensor bindings
  thermal: of-thermal: add support for reading coefficients property
  thermal: support slope and offset coefficients
  thermal: power_allocator: round the division when divvying up power
  thermal: exynos: Add the support for Exynos5433 TMU
  thermal: cpu_cooling: Fix power calculation when CPUs are offline
  thermal: cpu_cooling: Remove cpu_dev update on policy CPU update
  thermal: export thermal_zone_parameters to sysfs
  thermal: cpu_cooling: Check memory allocation of power_table
  ti-soc-thermal: request temperature periodically if hw can't do that itself
  ti-soc-thermal: implement eocz bit to make driver useful on omap3
  cleanup ti-soc-thermal
  thermal: remove stale THERMAL_POWER_ACTOR select
  thermal: Default OF created trip points to writable
  thermal: core: Add Kconfig option to enable writable trips
  thermal: x86_pkg_temp: drop const for thermal_zone_parameters
  of: thermal: Introduce sustainable power for a thermal zone
  thermal: add trace events to the power allocator governor
  thermal: introduce the Power Allocator governor
  ...
2015-06-25 17:51:55 -07:00
Lukas Wunner
c5fd936e99 drm/nouveau: Pause between setting gpu to D3hot and cutting the power
On the MacBook Pro, power of the gpu is cut by a gmux chip. Sometimes
the gpu gets stuck in powersaving mode and refuses to wake up
("Refused to change power state, currently in D3"). Inserting a
delay between setting the gpu to D3hot and cutting the power seems
to help (most of the time). This issue and its (partial) remediation
by the patch was observed with an Nvidia GT650M (NVE7 / GK107).

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-06-26 10:26:37 +10:00
Linus Torvalds
4570a37169 sound updates for 4.2-rc1
It was a busy development cycle at this time, as you can see a wide
 range of changes in diffstat.  There are no big changes but many
 refactoring and improvements.  Here we go some highlights:
 
 * ALSA core:
 - Procfs codes were cleaned up to use seq_file
 - Procfs can be opt out via Kconfig (only for EXPERT)
 - Two types of jack API were unified finally; now both kctl and input
   jack devs are handled via a single function call.
 
 * HD-audio
 - Continued code restructuring for the future ASoC driver; now HDA
   controller driver is split to a core helper module.
 - Preliminary codes for Skylake audio support in HDA core.
 - Proper i915 gfx power well management for SKL & co
 - Enabled runtime PM as default for Intel HDMI/DP codecs
 - Newer Tegra chip supports
 - More quirks for Dell headsets, Alienware (with CA0132), etc.
 - A couple of DRM ELD helper API functions
 
 * ASoC
 - Support for loading ASoC topology maps from firmware, intended to be
   used to allow self-describing DSP firmware images to be built which
   can map controls added by the DSP to userspace without the kernel
   needing to know about individual DSP firmwares
 - Lots of refactoring to avoid direct access to snd_soc_codec where
   it's not needed supporting future refactoring
 - Big refactoring, cleanup and enhancement for the Wolfson ADSP driver
 - Cleanup series for TI TAS2552 and R-CAR drivers
 - Fixes and improvements on RT56xx codecs
 - Support for TI TAS571x power amplifiers
 - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs
 - Support for x86 systems with RT5650 and Qualcomm Storm
 - Support for Mediatek AFE (Audio Front End) unit
 - Other various small fixes to ASoC codec drivers
 
 * Firewire
 - Enhanced to allow non-blocking streams to use timestamp
   synchronization
 - Improve support for DM1500 and BeBoBv3
 
 * Misc
 - Cleanup of old pci API functions over all PCI sound drivers
 - Fix long-standing regression of the old powermac i2c setup
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVitjmAAoJEGwxgFQ9KSmksW8P/2ngNzNpo/bmmGh6xjB7GWU9
 RDAkqhKd6yvcClQojGS9n4a9CJ8nk5tdqTr9rMp58N7DRv6GYCPdq0A+lLOih+yC
 UPcTkTMBKm6UtvJjEcaasMxhvs5xno345oo5KrBdvlfv1rXe83dTtzEsybWYkaVD
 dJbbr5QFaiyj5cTp9nanK5kyTyDDXCdP+vjBGv5u9+GbVxQ6Eenyts89uSqEZs1F
 ltoBrl4VotXyqHKneJ0ttUKEimcVIgu8rCXH0sTtCg0SZVJFi+UXzI/VkkS+expL
 x9bNN6bw5UT9LA8+qybFRETx+8qchFsffzeUEle4wkIpVKXt/VqjP3GIvp6umlF5
 RhU5Wumf2KuIVjgVsYxd7bUkmHr4ywpqS3vSWMWU90FApJay7exatzLPyUVN0AxH
 pdAizc8NWFk1kVtWq8jr9agEdxDt2l+E9UXij+ViGyouMZL1oSvOo9NgovfwvfC6
 qKUisUkq53p1uPOW/U5gvF7bee2enEXMI9YUY1Z8MHx7nloq+25Nqma8P0gYthB8
 6Qk+t1oqC2p7ZMSkyVHH9nySQmoLITZHZmsHqqpLW+jFtanhuckDI75AvmrScs+r
 3+2YZXxPI0caZZ1qxMCd7Clmh7ZcSeRe73HXSXmF0xrLffISM3Yg3ZN10cbWQRj2
 D6TiHCspLpn+pcYLcWJ2
 =D78E
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "It was a busy development cycle at this time, as you can see a wide
  range of changes in diffstat.  There are no big changes but many
  refactoring and improvements.  Here we go some highlights:

  ALSA core:
   - Procfs codes were cleaned up to use seq_file
   - Procfs can be opt out via Kconfig (only for EXPERT)
   - Two types of jack API were unified finally; now both kctl and input
     jack devs are handled via a single function call.

  HD-audio:
   - Continued code restructuring for the future ASoC driver; now HDA
     controller driver is split to a core helper module.
   - Preliminary codes for Skylake audio support in HDA core.
   - Proper i915 gfx power well management for SKL & co
   - Enabled runtime PM as default for Intel HDMI/DP codecs
   - Newer Tegra chip supports
   - More quirks for Dell headsets, Alienware (with CA0132), etc.
   - A couple of DRM ELD helper API functions

  ASoC:
   - Support for loading ASoC topology maps from firmware, intended to
     be used to allow self-describing DSP firmware images to be built
     which can map controls added by the DSP to userspace without the
     kernel needing to know about individual DSP firmwares
   - Lots of refactoring to avoid direct access to snd_soc_codec where
     it's not needed supporting future refactoring
   - Big refactoring, cleanup and enhancement for the Wolfson ADSP
     driver
   - Cleanup series for TI TAS2552 and R-CAR drivers
   - Fixes and improvements on RT56xx codecs
   - Support for TI TAS571x power amplifiers
   - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs
   - Support for x86 systems with RT5650 and Qualcomm Storm
   - Support for Mediatek AFE (Audio Front End) unit
   - Other various small fixes to ASoC codec drivers

  Firewire:
   - Enhanced to allow non-blocking streams to use timestamp
     synchronization
   - Improve support for DM1500 and BeBoBv3

  Misc:
   - Cleanup of old pci API functions over all PCI sound drivers
   - Fix long-standing regression of the old powermac i2c setup"

* tag 'sound-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (533 commits)
  ALSA: pcm: Fix pcm_class sysfs output
  ALSA: hda-beep: Update authors dead email address
  ASoC: wm_adsp: Move DSP Rate controls into the codec
  ASoC: wm8995: Fix setting sysclk for WM8995_SYSCLK_MCLK2 case
  ALSA: hda: provide default bus io ops extended hdac
  ALSA: hda: add hda link cleanup routine
  ALSA: hda: add hdac_ext stream creation and cleanup routines
  ASoC: rsrc-card: remove unused ret
  ALSA: HDAC: move SND_HDA_PREALLOC_SIZE to core
  ASoC: mediatek: Add machine driver for rt5650 rt5676 codec
  ASoC: mediatek: Add machine driver for MAX98090 codec
  ASoC: mediatek: Add AFE platform driver
  ASoC: rsnd: remove io from rsnd_mod
  ASoC: rsnd: move rsnd_mod_is_working() to rsnd_io_is_working()
  ASoC: rsnd: don't use rsnd_mod_to_io() on snd_kcontrol
  ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_src_xxx()
  ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_ssi_xxx()
  ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_dma_xxx()
  ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_get_adinr()
  ASoC: rsnd: add common interrupt handler for SSI/SRC/DMA
  ...
2015-06-25 17:15:18 -07:00
Linus Torvalds
f7b08217c7 Merge branch 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull DMI updates from Jean Delvare:
 "The most important change is the new sysfs interface to the DMI table,
  which will let user-space tools (such as dmidecode) access the table
  without relying on /dev/mem"

* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  firmware: dmi: struct dmi_header should be packed
  firmware: dmi_scan: Coding style cleanups
  Documentation: ABI: sysfs-firmware-dmi: add -entries suffix to file name
  firmware: dmi_scan: add SBMIOS entry and DMI tables
  firmware: dmi_scan: Trim DMI table length before exporting it
  firmware: dmi_scan: Rename dmi_table to dmi_decode_table
  firmware: dmi: List my quilt tree
  firmware: dmi_scan: Only honor end-of-table for 64-bit tables
2015-06-25 17:14:01 -07:00
Michal Simek
cbdc281019 drivers/firmware/memmap.c: fix kernel-doc format
Fix kernel-doc format validation to be able to use kernel-doc script for
checking it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:41 -07:00
Rasmus Villemoes
90a9befb20 drivers/md/md.c: use strreplace()
There's no point in starting over when we meet a '/'.  This also
eliminates a stack variable and a little .text.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:40 -07:00
Rasmus Villemoes
a29fd614a6 drivers/base/core.c: use strreplace()
This eliminates a little .text and avoids repeating the strchr call when
we meet a '!' (which will happen at least once).

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:40 -07:00
Tejun Heo
e2f15f9a79 netconsole: implement extended console support
printk logbuf keeps various metadata and optional key=value dictionary for
structured messages, both of which are stripped when messages are handed
to regular console drivers.

It can be useful to have this metadata and dictionary available to
netconsole consumers.  This obviously makes logging via netconsole more
complete and the sequence number in particular is useful in environments
where messages may be lost or reordered in transit - e.g.  when netconsole
is used to collect messages in a large cluster where packets may have to
travel congested hops to reach the aggregator.  The lost and reordered
messages can easily be identified and handled accordingly using the
sequence numbers.

printk recently added extended console support which can be selected by
setting CON_EXTENDED flag.  From console driver side, not much changes.
The only difference is that the text passed to the write callback is
formatted the same way as /dev/kmsg.

This patch implements extended console support for netconsole which can be
enabled by either prepending "+" to a netconsole boot param entry or
echoing 1 to "extended" file in configfs.  When enabled, netconsole
transmits extended log messages with headers identical to /dev/kmsg
output.

There's one complication due to message fragments.  netconsole limits the
maximum message size to 1k and messages longer than that are split into
multiple fragments.  As all extended console messages should carry
matching headers and be uniquely identifiable, each extended message
fragment carries full copy of the metadata and an extra header field to
identify the specific fragment.  The optional header is of the form
"ncfrag=OFF/LEN" where OFF is the byte offset into the message body and
LEN is the total length.

To avoid unnecessarily making printk format extended messages, Extended
netconsole is registered with printk when the first extended netconsole is
configured.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Miller <davem@davemloft.net>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:39 -07:00
Tejun Heo
369e5a8881 netconsole: make all dynamic netconsoles share a mutex
Currently, each dynamic netconsole_target uses its own separate mutex to
synchronize the configuration operations.

This patch replaces the per-netconsole_target mutexes with a single
mutex - dynamic_netconsole_mutex.  The reduced granularity doesn't hurt
anything, the code is minutely simpler and this'd allow adding
operations which should be synchronized across all dynamic netconsoles.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Miller <davem@davemloft.net>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:39 -07:00
Tejun Heo
698cf1c616 netconsole: make netconsole_target->enabled a bool
netconsole uses both bool and int for boolean values.  Let's convert
nt->enabled to bool for consistency.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Miller <davem@davemloft.net>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:39 -07:00
Tejun Heo
a6d403ac96 netconsole: remove unnecessary netconsole_target_get/out() from write_msg()
write_msg() grabs target_list_lock and walks target_list invoking
netpool_send_udp() on each target.  Curiously, it protects each iteration
with netconsole_target_get/put() even though it never releases
target_list_lock which protects all the members.

While this doesn't harm anything, it doesn't serve any purpose either.
The items on the list can't go away while target_list_lock is held.
Remove the unnecessary get/put pair.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Miller <davem@davemloft.net>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:39 -07:00
Colin Ian King
4ae555a531 drivers/misc/altera-stapl/altera.c: remove extraneous KERN_INFO prefix
The KERN_INFO prefix is being prepended to KERN_DEBUG when using the
dprink macro, Remove it as it is extraneous since we are printing the
message out as debug via dprintk().

Fixes smatch warning:

drivers/misc/altera-stapl/altera.c:2454 altera_init()
   warn: KERN_* level not at start of string

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Igor M. Liplianin <liplianin@netup.ru>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:38 -07:00
Josh Triplett
3033f14ab7 clone: support passing tls argument via C rather than pt_regs magic
clone has some of the quirkiest syscall handling in the kernel, with a
pile of special cases, historical curiosities, and architecture-specific
calling conventions.  In particular, clone with CLONE_SETTLS accepts a
parameter "tls" that the C entry point completely ignores and some
assembly entry points overwrite; instead, the low-level arch-specific
code pulls the tls parameter out of the arch-specific register captured
as part of pt_regs on entry to the kernel.  That's a massive hack, and
it makes the arch-specific code only work when called via the specific
existing syscall entry points; because of this hack, any new clone-like
system call would have to accept an identical tls argument in exactly
the same arch-specific position, rather than providing a unified system
call entry point across architectures.

The first patch allows architectures to handle the tls argument via
normal C parameter passing, if they opt in by selecting
HAVE_COPY_THREAD_TLS.  The second patch makes 32-bit and 64-bit x86 opt
into this.

These two patches came out of the clone4 series, which isn't ready for
this merge window, but these first two cleanup patches were entirely
uncontroversial and have acks.  I'd like to go ahead and submit these
two so that other architectures can begin building on top of this and
opting into HAVE_COPY_THREAD_TLS.  However, I'm also happy to wait and
send these through the next merge window (along with v3 of clone4) if
anyone would prefer that.

This patch (of 2):

clone with CLONE_SETTLS accepts an argument to set the thread-local
storage area for the new thread.  sys_clone declares an int argument
tls_val in the appropriate point in the argument list (based on the
various CLONE_BACKWARDS variants), but doesn't actually use or pass along
that argument.  Instead, sys_clone calls do_fork, which calls
copy_process, which calls the arch-specific copy_thread, and copy_thread
pulls the corresponding syscall argument out of the pt_regs captured at
kernel entry (knowing what argument of clone that architecture passes tls
in).

Apart from being awful and inscrutable, that also only works because only
one code path into copy_thread can pass the CLONE_SETTLS flag, and that
code path comes from sys_clone with its architecture-specific
argument-passing order.  This prevents introducing a new version of the
clone system call without propagating the same architecture-specific
position of the tls argument.

However, there's no reason to pull the argument out of pt_regs when
sys_clone could just pass it down via C function call arguments.

Introduce a new CONFIG_HAVE_COPY_THREAD_TLS for architectures to opt into,
and a new copy_thread_tls that accepts the tls parameter as an additional
unsigned long (syscall-argument-sized) argument.  Change sys_clone's tls
argument to an unsigned long (which does not change the ABI), and pass
that down to copy_thread_tls.

Architectures that don't opt into copy_thread_tls will continue to ignore
the C argument to sys_clone in favor of the pt_regs captured at kernel
entry, and thus will be unable to introduce new versions of the clone
syscall.

Patch co-authored by Josh Triplett and Thiago Macieira.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:38 -07:00
Pratyush Anand
9c5dcdd0c7 Mohit Kumar has moved
Mohit's email-id doesn't exist anymore as he has left the company.
Replace ST's id with mohit.kumar.dhaka@gmail.com.

Signed-off-by: Pratyush Anand <pratyush.anand@gmail.com>
Cc: Mohit Kumar <mohit.kumar.dhaka@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:38 -07:00
Pratyush Anand
e34cadde3b Pratyush Anand has moved
pratyush.anand@st.com email-id doesn't exist anymore as I have left the
company.  Replace ST's id with pratyush.anand@gmail.com.

Signed-off-by: Pratyush Anand <pratyush.anand@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:38 -07:00
Sergey Senozhatsky
d93435c3fb zram: check comp algorithm availability earlier
Improvement idea by Marcin Jabrzyk.

comp_algorithm_store() silently accepts any supplied algorithm name,
because zram performs algorithm availability check later, during the
device configuration phase in disksize_store() and emits the following
error:

  "zram: Cannot initialise %s compressing backend"

this error line is somewhat generic and, besides, can indicate a failed
attempt to allocate compression backend's working buffers.

add algorithm availability check to comp_algorithm_store():

  echo lzz > /sys/block/zram0/comp_algorithm
  -bash: echo: write error: Invalid argument

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Marcin Jabrzyk <m.jabrzyk@samsung.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:37 -07:00
Sergey Senozhatsky
4bbacd51a6 zram: cut trailing newline in algorithm name
Supplied sysfs values sometimes contain new-line symbols (echo vs.  echo
-n), which we also copy as a compression algorithm name.  it works fine
when we lookup for compression algorithm, because we use sysfs_streq()
which takes care of new line symbols.  however, it doesn't look nice when
we print compression algorithm name if zcomp_create() failed:

 zram: Cannot initialise LXZ
            compressing backend

cut trailing new-line, so the error string will look like

  zram: Cannot initialise LXZ compressing backend

we also now can replace sysfs_streq() in zcomp_available_show() with
strcmp().

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Sergey Senozhatsky
17162f41f0 zram: cosmetic zram_bvec_write() cleanup
`bool locked' local variable tells us if we should perform
zcomp_strm_release() or not (jumped to `out' label before
zcomp_strm_find() occurred), which is equivalent to `zstrm' being or not
being NULL.  remove `locked' and check `zstrm' instead.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Sergey Senozhatsky
6566d1a32b zram: add dynamic device add/remove functionality
We currently don't support on-demand device creation.  The one and only
way to have N zram devices is to specify num_devices module parameter
(default value: 1).  IOW if, for some reason, at some point, user wants
to have N + 1 devies he/she must umount all the existing devices, unload
the module, load the module passing num_devices equals to N + 1.  And do
this again, if needed.

This patch introduces zram control sysfs class, which has two sysfs
attrs:
- hot_add      -- add a new zram device
- hot_remove   -- remove a specific (device_id) zram device

hot_add sysfs attr is read-only and has only automatic device id
assignment mode (as requested by Minchan Kim).  read operation performed
on this attr creates a new zram device and returns back its device_id or
error status.

Usage example:
	# add a new specific zram device
	cat /sys/class/zram-control/hot_add
	2

	# remove a specific zram device
	echo 4 > /sys/class/zram-control/hot_remove

Returning zram_add() error code back to user (-ENOMEM in this case)

	cat /sys/class/zram-control/hot_add
	cat: /sys/class/zram-control/hot_add: Cannot allocate memory

NOTE, there might be users who already depend on the fact that at least
zram0 device gets always created by zram_init(). Preserve this behavior.

[minchan@kernel.org: use zram->claim to avoid lockdep splat]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Sergey Senozhatsky
f405c445a4 zram: close race by open overriding
[ Original patch from Minchan Kim <minchan@kernel.org> ]

Commit ba6b17d68c ("zram: fix umount-reset_store-mount race
condition") introduced bdev->bd_mutex to protect a race between mount
and reset.  At that time, we don't have dynamic zram-add/remove feature
so it was okay.

However, as we introduce dynamic device feature, bd_mutex became
trouble.

	CPU 0

echo 1 > /sys/block/zram<id>/reset
  -> kernfs->s_active(A)
    -> zram:reset_store->bd_mutex(B)

	CPU 1

echo <id> > /sys/class/zram/zram-remove
  ->zram:zram_remove: bd_mutex(B)
  -> sysfs_remove_group
    -> kernfs->s_active(A)

IOW, AB -> BA deadlock

The reason we are holding bd_mutex for zram_remove is to prevent
any incoming open /dev/zram[0-9]. Otherwise, we could remove zram
others already have opened. But it causes above deadlock problem.

To fix the problem, this patch overrides block_device.open and
it returns -EBUSY if zram asserts he claims zram to reset so any
incoming open will be failed so we don't need to hold bd_mutex
for zram_remove ayn more.

This patch is to prepare for zram-add/remove feature.

[sergey.senozhatsky@gmail.com: simplify reset_store()]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Sergey Senozhatsky
92ff152887 zram: return zram device_id from zram_add()
This patch prepares zram to enable on-demand device creation.
zram_add() performs automatic device_id assignment and returns
new device id (>= 0) or error code (< 0).

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Sergey Senozhatsky
b31177f2a9 zram: trivial: correct flag operations comment
We don't have meta->tb_lock anymore and use meta table entry bit_spin_lock
instead. update corresponding comment.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Sergey Senozhatsky
d12b63c927 zram: report every added and removed device
With dynamic device creation/removal (which will be introduced later in
the series) printing num_devices in zram_init() will not make a lot of
sense, as well as printing the number of destroyed devices in
destroy_devices().  Print per-device action (added/removed) in zram_add()
and zram_remove() instead.

Example:

[ 3645.259652] zram: Added device: zram5
[ 3646.152074] zram: Added device: zram6
[ 3650.585012] zram: Removed device: zram5
[ 3655.845584] zram: Added device: zram8
[ 3660.975223] zram: Removed device: zram6

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Sergey Senozhatsky
c3cdb40e66 zram: remove max_num_devices limitation
Limiting the number of zram devices to 32 (default max_num_devices value)
is confusing, let's drop it.  A user with 2TB or 4TB of RAM, for example,
can request as many devices as he can handle.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Sergey Senozhatsky
522698d7ca zram: reorganize code layout
This patch looks big, but basically it just moves code blocks.
No functional changes.

Our current code layout looks like a sandwitch.

For example,
a) between read/write handlers, we have update_used_max() helper function:

static int zram_decompress_page
static int zram_bvec_read
static inline void update_used_max
static int zram_bvec_write
static int zram_bvec_rw

b) RW request handlers __zram_make_request/zram_bio_discard are divided by
sysfs attr reset_store() function and corresponding zram_reset_device()
handler:

static void zram_bio_discard
static void zram_reset_device
static ssize_t disksize_store
static ssize_t reset_store
static void __zram_make_request

c) we first a bunch of sysfs read/store functions. then a number of
one-liners, then helper functions, RW functions, sysfs functions, helper
functions again, and so on.

Reorganize layout to be more logically grouped (a brief description,
`cat zram_drv.c | grep static` gives a bigger picture):

-- one-liners: zram_test_flag/etc.

-- helpers: is_partial_io/update_position/etc

-- sysfs attr show/store functions + ZRAM_ATTR_RO() generated stats
show() functions
exception: reset and disksize store functions are required to be after
meta() functions. because we do device create/destroy actions in these
sysfs handlers.

-- "mm" functions: meta get/put, meta alloc/free, page free
static inline bool zram_meta_get
static inline void zram_meta_put
static void zram_meta_free
static struct zram_meta *zram_meta_alloc
static void zram_free_page

-- a block of I/O functions
static int zram_decompress_page
static int zram_bvec_read
static int zram_bvec_write
static void zram_bio_discard
static int zram_bvec_rw
static void __zram_make_request
static void zram_make_request
static void zram_slot_free_notify
static int zram_rw_page

-- device contol: add/remove/init/reset functions (+zram-control class
will sit here)
static int zram_reset_device
static ssize_t reset_store
static ssize_t disksize_store
static int zram_add
static void zram_remove
static int __init zram_init
static void __exit zram_exit

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Sergey Senozhatsky
85508ec6cb zram: use idr instead of `zram_devices' array
This patch makes some preparations for on-demand device add/remove
functionality.

Remove `zram_devices' array and switch to id-to-pointer translation (idr).
idr doesn't bloat zram struct with additional members, f.e.  list_head,
yet still provides ability to match the device_id with the device pointer.

No user-space visible changes.

[Julia.Lawall@lip6.fr: return -ENOMEM when `queue' alloc fails]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Sergey Senozhatsky
3bca3ef769 zram: cosmetic ZRAM_ATTR_RO code formatting tweak
Fix a misplaced backslash.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:36 -07:00
Marcin Jabrzyk
9e65bf68a8 zram: remove obsolete ZRAM_DEBUG option
This config option doesn't provide any usage for zram.

Signed-off-by: Marcin Jabrzyk <m.jabrzyk@samsung.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 17:00:35 -07:00
Linus Torvalds
64e22b8685 Merge branch 'for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:

 - a number of libata core changes to better support NCQ TRIM.

 - ahci now supports MSI-X in single IRQ mode to support a new
   controller which doesn't implement MSI or INTX.

 - ahci now supports edge-triggered IRQ mode to support a new controller
   which for some odd reason did edge-triggered IRQ.

 - the usual controller support additions and changes.

* 'for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (27 commits)
  libata: Do not blacklist Micron M500DC
  ata: ahci_mvebu: add suspend/resume support
  ahci, msix: Fix build error for !PCI_MSI
  ahci: Add support for Cavium's ThunderX host controller
  ahci: Add generic MSI-X support for single interrupts to SATA PCI driver
  libata: finally use __initconst in ata_parse_force_one()
  drivers: ata: add support for Ceva sata host controller
  devicetree:bindings: add devicetree bindings for ceva ahci
  ahci: added support for Freescale AHCI sata
  ahci: Store irq number in struct ahci_host_priv
  ahci: Move interrupt enablement code to a separate function
  Doc: libata: Fix spelling typo found in libata.xml
  ata:sata_nv - Change 1 to true for bool type variable.
  ata: add Broadcom AHCI SATA3 driver for STB chips
  Documentation: devicetree: add Broadcom SATA binding
  libata: Fix regression when the NCQ Send and Receive log page is absent
  ata: hpt366: fix constant cast warning
  ata: ahci_xgene: potential NULL dereference in probe
  ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.
  libahci: Add support to handle HOST_IRQ_STAT as edge trigger latch.
  ...
2015-06-25 16:49:21 -07:00
Linus Torvalds
6597ac8a51 - DM core cleanups
- blk-mq request-based DM no longer uses any mempools now that partial
     completions are no longer handled as part of cloned requests
 
 - DM raid cleanups and support for MD raid0
 
 - DM cache core advances and a new stochastic-multi-queue (smq) cache
   replacement policy
   - smq is the new default dm-cache policy
 
 - DM thinp cleanups and much more efficient large discard support
 
 - DM statistics support for request-based DM and nanosecond resolution
   timestamps
 
 - Fixes to DM stripe, DM log-writes, DM raid1 and DM crypt
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJViE/tAAoJEMUj8QotnQNag8wIAMhcmy46qGCy6SrOew6D8EQ0
 4Ielsr5ZI67Q9pZVI1x/Zdt5GfDUGXiSEy/y8xoIuJfmsRXwnZ/gkOUyWpSUW8dH
 mgPUUpGF0aN2D/66P3chgm39rVZEt3crDY+SQu02Fm86JKlMUomFbWKgMXpsM6Ga
 HHW80zLF9Ca6D5m8xMze/ic1KBJtA9zaXcO9xnMCBym8mSaORtgwoCzKAgy43H7U
 KIBwPKR/y+c7SaKWGxXwxxhTKZDyP4FbgtiJ2Dc9yBDoD0RzbyuY/EFMEUPEbEMv
 e9fFHNEzmKlsNVY2vYXkVH4TdldWrrjkmYj/JVtz8cifoupWOOnDTjb2aqjAIww=
 =DKCC
 -----END PGP SIGNATURE-----

Merge tag 'dm-4.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - DM core cleanups:

     * blk-mq request-based DM no longer uses any mempools now that
       partial completions are no longer handled as part of cloned
       requests

 - DM raid cleanups and support for MD raid0

 - DM cache core advances and a new stochastic-multi-queue (smq) cache
   replacement policy

     * smq is the new default dm-cache policy

 - DM thinp cleanups and much more efficient large discard support

 - DM statistics support for request-based DM and nanosecond resolution
   timestamps

 - Fixes to DM stripe, DM log-writes, DM raid1 and DM crypt

* tag 'dm-4.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (39 commits)
  dm stats: add support for request-based DM devices
  dm stats: collect and report histogram of IO latencies
  dm stats: support precise timestamps
  dm stats: fix divide by zero if 'number_of_areas' arg is zero
  dm cache: switch the "default" cache replacement policy from mq to smq
  dm space map metadata: fix occasional leak of a metadata block on resize
  dm thin metadata: fix a race when entering fail mode
  dm thin: fail messages with EOPNOTSUPP when pool cannot handle messages
  dm thin: range discard support
  dm thin metadata: add dm_thin_remove_range()
  dm thin metadata: add dm_thin_find_mapped_range()
  dm btree: add dm_btree_remove_leaves()
  dm stats: Use kvfree() in dm_kvfree()
  dm cache: age and write back cache entries even without active IO
  dm cache: prefix all DMERR and DMINFO messages with cache device name
  dm cache: add fail io mode and needs_check flag
  dm cache: wake the worker thread every time we free a migration object
  dm cache: add stochastic-multi-queue (smq) policy
  dm cache: boost promotion of blocks that will be overwritten
  dm cache: defer whole cells
  ...
2015-06-25 16:34:39 -07:00
Linus Torvalds
e4bc13adfd Merge branch 'for-4.2/writeback' of git://git.kernel.dk/linux-block
Pull cgroup writeback support from Jens Axboe:
 "This is the big pull request for adding cgroup writeback support.

  This code has been in development for a long time, and it has been
  simmering in for-next for a good chunk of this cycle too.  This is one
  of those problems that has been talked about for at least half a
  decade, finally there's a solution and code to go with it.

  Also see last weeks writeup on LWN:

        http://lwn.net/Articles/648292/"

* 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits)
  writeback, blkio: add documentation for cgroup writeback support
  vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB
  writeback: do foreign inode detection iff cgroup writeback is enabled
  v9fs: fix error handling in v9fs_session_init()
  bdi: fix wrong error return value in cgwb_create()
  buffer: remove unusued 'ret' variable
  writeback: disassociate inodes from dying bdi_writebacks
  writeback: implement foreign cgroup inode bdi_writeback switching
  writeback: add lockdep annotation to inode_to_wb()
  writeback: use unlocked_inode_to_wb transaction in inode_congested()
  writeback: implement unlocked_inode_to_wb transaction and use it for stat updates
  writeback: implement [locked_]inode_to_wb_and_lock_list()
  writeback: implement foreign cgroup inode detection
  writeback: make writeback_control track the inode being written back
  writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb()
  mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use
  writeback: implement memcg writeback domain based throttling
  writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes
  writeback: implement memcg wb_domain
  writeback: update wb_over_bg_thresh() to use wb_domain aware operations
  ...
2015-06-25 16:00:17 -07:00
Linus Torvalds
ad90fb9751 Merge branch 'for-4.2/sg' of git://git.kernel.dk/linux-block
Pull asm/scatterlist.h removal from Jens Axboe:
 "We don't have any specific arch scatterlist anymore, since parisc
  finally switched over.  Kill the include"

* 'for-4.2/sg' of git://git.kernel.dk/linux-block:
  remove scatterlist.h generation from arch Kbuild files
  remove <asm/scatterlist.h>
2015-06-25 15:22:36 -07:00
Linus Torvalds
6a398a3ef4 Merge branch 'for-4.2/drivers' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
 "This contains:

   - a few race fixes for null_blk, from Akinobu Mita.

   - a series of fixes for mtip32xx, from Asai Thambi and Selvan Mani at
     Micron.

   - NVMe:
        * Fix for missing error return on allocation failure, from Axel
          Lin.

        * Code consolidation and cleanups from Christoph.

        * Memory barrier addition, syncing queue count and queue
          pointers. From Jon Derrick.

        * Various fixes from Keith, an addition to support user
          issue reset from sysfs or ioctl, and automatic namespace
          rescan.

        * Fix from Matias, avoiding losing some request flags when
          marking the request failfast.

   - small cleanups and sparse fixups for ps3vram.  From Geert
     Uytterhoeven and Geoff Lavand.

   - s390/dasd dead code removal, from Jarod Wilson.

   - a set of fixes and optimizations for loop, from Ming Lei.

   - conversion to blkdev_reread_part() of loop, dasd, ndb.  From Ming
     Lei.

   - updates to cciss.  From Tomas Henzl"

* 'for-4.2/drivers' of git://git.kernel.dk/linux-block: (44 commits)
  mtip32xx: Fix accessing freed memory
  block: nvme-scsi: Catch kcalloc failure
  NVMe: Fix IO for extended metadata formats
  nvme: don't overwrite req->cmd_flags on sync cmd
  mtip32xx: increase wait time for hba reset
  mtip32xx: fix minor number
  mtip32xx: remove unnecessary sleep in mtip_ftl_rebuild_poll()
  mtip32xx: fix crash on surprise removal of the drive
  mtip32xx: Abort I/O during secure erase operation
  mtip32xx: fix incorrectly setting MTIP_DDF_SEC_LOCK_BIT
  mtip32xx: remove unused variable 'port->allocated'
  mtip32xx: fix rmmod issue
  MAINTAINERS: Update ps3vram block driver
  block/ps3vram: Remove obsolete reference to MTD
  block/ps3vram: Fix sparse warnings
  NVMe: Automatic namespace rescan
  NVMe: Memory barrier before queue_count is incremented
  NVMe: add sysfs and ioctl controller reset
  null_blk: restart request processing on completion handler
  null_blk: prevent timer handler running on a different CPU where started
  ...
2015-06-25 15:12:50 -07:00
Dmitry Torokhov
7c494375b7 Input: improve parsing OF parameters for touchscreens
When applying touchscreen parameters specified in device tree let's make
sure we keep whatever setup was done by the driver and not reset the
missing values to zero.

Reported-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-25 14:45:46 -07:00
Dmitry Torokhov
38e1b72bd8 Input: edt-ft5x06 - mark as direct input device
edt-ft5x06 is a touchscreen and thus a direct input device; let's amrk it
as such. This also allows us to drop some initialization code as
input_init_mt_slots() will do that for us.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-25 14:45:06 -07:00
Anshul Garg
3e2b03dad5 Input: use for_each_set_bit() where appropriate
Instead of iterating over all bits in a bitmap and test them individually
let's siwtch to for_each_set_bit() which is more compact and is also
faster.

Also use bitmap_weight() when counting number of set bits.

This also fixes INPUT_DO_TOGGLE() implementation as it should have used
*_CNT as the upper boundary, not *_MAX.

Signed-off-by: Anshul Garg <aksgarg1989@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-25 14:44:36 -07:00
Linus Torvalds
bfffa1cc9d Merge branch 'for-4.2/core' of git://git.kernel.dk/linux-block
Pull core block IO update from Jens Axboe:
 "Nothing really major in here, mostly a collection of smaller
  optimizations and cleanups, mixed with various fixes.  In more detail,
  this contains:

   - Addition of policy specific data to blkcg for block cgroups.  From
     Arianna Avanzini.

   - Various cleanups around command types from Christoph.

   - Cleanup of the suspend block I/O path from Christoph.

   - Plugging updates from Shaohua and Jeff Moyer, for blk-mq.

   - Eliminating atomic inc/dec of both remaining IO count and reference
     count in a bio.  From me.

   - Fixes for SG gap and chunk size support for data-less (discards)
     IO, so we can merge these better.  From me.

   - Small restructuring of blk-mq shared tag support, freeing drivers
     from iterating hardware queues.  From Keith Busch.

   - A few cfq-iosched tweaks, from Tahsin Erdogan and me.  Makes the
     IOPS mode the default for non-rotational storage"

* 'for-4.2/core' of git://git.kernel.dk/linux-block: (35 commits)
  cfq-iosched: fix other locations where blkcg_to_cfqgd() can return NULL
  cfq-iosched: fix sysfs oops when attempting to read unconfigured weights
  cfq-iosched: move group scheduling functions under ifdef
  cfq-iosched: fix the setting of IOPS mode on SSDs
  blktrace: Add blktrace.c to BLOCK LAYER in MAINTAINERS file
  block, cgroup: implement policy-specific per-blkcg data
  block: Make CFQ default to IOPS mode on SSDs
  block: add blk_set_queue_dying() to blkdev.h
  blk-mq: Shared tag enhancements
  block: don't honor chunk sizes for data-less IO
  block: only honor SG gap prevention for merges that contain data
  block: fix returnvar.cocci warnings
  block, dm: don't copy bios for request clones
  block: remove management of bi_remaining when restoring original bi_end_io
  block: replace trylock with mutex_lock in blkdev_reread_part()
  block: export blkdev_reread_part() and __blkdev_reread_part()
  suspend: simplify block I/O handling
  block: collapse bio bit space
  block: remove unused BIO_RW_BLOCK and BIO_EOF flags
  block: remove BIO_EOPNOTSUPP
  ...
2015-06-25 14:29:53 -07:00
Linus Torvalds
cc8a0a9439 This pull request includes the following UBI/UBIFS changes:
* Minor fixes for UBI and UBIFS
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJVi9DTAAoJEPmeIjfg4UaaOlAP/AtZqcxpCHlKpbZUz7z1MmCb
 MP9AbowP0CSXrMYSA7GrBROw+bfTM7aZrhWqhhoJxAyBbb9LGldjW9xZmUqUvS5e
 LZjAO8sWqxEbfVBqnpTgA2AiSN37I3+epYqgDFNlNCtxPYxkEXpXVoLUSdrAUKw8
 24EjPe0tq1JKLmjh3XJQZJnmCW+7xPKRUj7KiwPZzombIoNXFA9z4PCOLLlnDx1X
 TRasArrncarslQaHQerRoZUKC/hoIGZMipv94pNovgO8HAcZ/N19ef1Fc4iG5zvS
 XUMerUyKMTVfR6LFjueMjRpEMOmDb4AifWeDKY00xqY4RCnkIcAAqVRBGWQep6Y4
 PxCwttNktykWj/LygPCsQk6gd0IxdVGsFra4DpxhCCWXaUw2RJCRg0a4mQFOqojO
 tmCVQVYgd4Ob2DDnxmS7Z8IvjIWzsSkgatF+Dde2feeHUwEuM9NoudHg704+A30x
 3fNwIFhuREhOymxGpBaprfaKh7khF88CcrGjiEOvw/DK0QfwlVoUVLqjkNVaLZXC
 nrwNATdheq2gMV2Mdydy/uo5NpUxeblSrlnuknKQSTmH5m2/U9F9lJ/v3Sv7ShjB
 gWqyNIoxJBKTSbsGkFP5bzWmxwsQ4HlPTcAmJhoUDK7SLeXThhgRwB4o2zlriYfS
 D7ZVxRMY5JCNxomIzD0X
 =xU0H
 -----END PGP SIGNATURE-----

Merge tag 'upstream-4.2-rc1' of git://git.infradead.org/linux-ubifs

Pull UBI/UBIFS updates from Richard Weinberger:
 "Minor fixes for UBI and UBIFS"

* tag 'upstream-4.2-rc1' of git://git.infradead.org/linux-ubifs:
  UBI: Remove unnecessary `\'
  UBI: Use static class and attribute groups
  UBI: add a helper function for updatting on-flash layout volumes
  UBI: Fastmap: Do not add vol if it already exists
  UBI: Init vol->reserved_pebs by assignment
  UBI: Fastmap: Rename variables to make them meaningful
  UBI: Fastmap: Remove unnecessary `\'
  UBI: Fastmap: Use max() to get the larger value
  ubifs: fix to check error code of register_shrinker
  UBI: block: Dynamically allocate minor numbers
2015-06-25 14:11:34 -07:00
Linus Torvalds
55a7d4b85c h8300 pull request for 4.2
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJVi5eKAAoJEEdC8EELKDmcZWoQANh4UC+JGcP3XJ+AWyJpX1Rg
 VQMmSAiF/QZr3ty9sbU/6v3pNK5B1s2etY7lWzzCsp7GMhYln83OjwJn8pkcAvRk
 4GoEio4Yp0RMTOYk1nvKEhUGnxLwpma+xX5ulZkSTaYhZl++eX8HUGmfHhpxMcK9
 Unz1Y7vRIRaNUIawZECijxVj9yvteczwdwjWBp7AH2HChZ3LWJGo2xikd1Jwizx8
 zPv+mdaHkV9gbORS53hvqVaXXjiZVmLKQEz6LlWHubuWysf98YcBzNAhSKpjQzqW
 cwjXyw3MNc5fPjliwUstN/9ImWFdRJgwmdQ0DJ1v6kWPbHMQ4lCxeasy02YJ7l0R
 TWUOTyTSGT7Hd8CRrryo7akQ3nt8g7fZAR6nVujexbjkSt9ZbBSplAikiSKRbjU2
 7jkolYSM1ADqEeBBwcDnG2O45Pv8PxKGa4/8MV2hkcvrkkJp2lW+KybY0qp19MWb
 Dw09QYzFb5u6sKqD6AsjJQ6GKxLxNn3yBKk16V1yF0kAvQRdIj0XPgtMnGUgdkAw
 QA1nRQM25CLyOtH9SVWogRLof8UTZUlPtUCxKRww2//pAVkKGHg/afnnkqN933Yc
 Kv7/Mz2es6Km+D4qkQetnXF/IOxWfVUvnQa23Oe7gmkg4KNNrGO6bo7iQXDjDrHa
 LuNfJZRG5DzDjbdcp2t3
 =fE8E
 -----END PGP SIGNATURE-----

Merge tag 'for-4.2' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux

Pull Renesas H8/300 architecture re-introduction from Yoshinori Sato.

We dropped arch/h8300 two years ago as stale and old, this is a new and
more modern rewritten arch support for the same architecture.

* tag 'for-4.2' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux: (27 commits)
  h8300: fix typo.
  h8300: Always build dtb
  h8300: Remove ARCH_WANT_IPC_PARSE_VERSION
  sh-sci: Get register size from platform device
  clk: h8300: fix error handling in h8s2678_pll_clk_setup()
  h8300: Symbol name fix
  h8300: devicetree source
  h8300: configs
  h8300: IRQ chip driver
  h8300: clocksource
  h8300: clock driver
  h8300: Build scripts
  h8300: library functions
  h8300: Memory management
  h8300: miscellaneous functions
  h8300: process helpers
  h8300: compressed image support
  h8300: Low level entry
  h8300: kernel startup
  h8300: Interrupt and exceptions
  ...
2015-06-25 13:07:24 -07:00
Ilya Dryomov
b55841807f rbd: queue_depth map option
nr_requests (/sys/block/rbd<id>/queue/nr_requests) is pretty much
irrelevant in blk-mq case because each driver sets its own max depth
that it can handle and that's the number of tags that gets preallocated
on setup.  Users can't increase queue depth beyond that value via
writing to nr_requests.

For rbd we are happy with the default BLKDEV_MAX_RQ (128) for most
cases but we want to give users the opportunity to increase it.
Introduce a new per-device queue_depth option to do just that:

    $ sudo rbd map -o queue_depth=1024 ...

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2015-06-25 18:30:55 +03:00
Ilya Dryomov
d147543d79 rbd: store rbd_options in rbd_device
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2015-06-25 18:30:55 +03:00
Ilya Dryomov
210c104c54 rbd: terminate rbd_opts_tokens with Opt_err
Also nuke useless Opt_last_bool and don't break lines unnecessarily.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2015-06-25 18:30:54 +03:00
Ilya Dryomov
d3834fefcf rbd: bump queue_max_segments
The default queue_limits::max_segments value (BLK_MAX_SEGMENTS = 128)
unnecessarily limits bio sizes to 512k (assuming 4k pages).  rbd, being
a virtual block device, doesn't have any restrictions on the number of
physical segments, so bump max_segments to max_hw_sectors, in theory
allowing a sector per segment (although the only case this matters that
I can think of is some readv/writev style thing).  In practice this is
going to give us 1M bios - the number of segments in a bio is limited
in bio_get_nr_vecs() by BIO_MAX_PAGES = 256.

Note that this doesn't result in any improvement on a typical direct
sequential test.  This is because on a box with a not too badly
fragmented memory the default BLK_MAX_SEGMENTS is enough to see nice
rbd object size sized requests.  The only difference is the size of
bios being merged - 512k vs 1M for something like

    $ dd if=/dev/zero of=/dev/rbd0 oflag=direct bs=$RBD_OBJ_SIZE
    $ dd if=/dev/rbd0 iflag=direct of=/dev/null bs=$RBD_OBJ_SIZE

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2015-06-25 18:30:49 +03:00
Yuval Mintz
592b9b8d68 bnx2x: Fix linearization for encapsulated packets
Due to FW constraints, driver must make sure that transmitted SKBs will
not be too fragmented, or in the case that they are - that each 'window'
of fragments passed to the FW would contain at least an mss worth of data.

For encapsultaed packets the calculation is wrong, since it ignores the
inner headers in the calculation of the headers' length.
This could lead to a FW assertion in case of a too-fragmented encapsulated
packet.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-25 06:30:38 -07:00
Yuval Mintz
efd38b8f52 bnx2x: Release nvram lock on error flow
During an error flow when trying to access the nvram the driver doesn't
release the hw lock it acquired.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-25 06:30:38 -07:00
Ariel Elior
dc6a20aa3b bnx2x: Fix statistics gathering on link change
Since driver statistics flow access MACs and those might reset during
link re-configurations, when we're about to change link properties we
have to make sure that statistics are not operational.
Statisics would be re-enabled [i.e., gathering of statistics would
re-commence] once physical link is achieved again.

Since driver employs a link-flap avoidance scheme, there are scenarios
where driver will receive no indication that the new link is up, and
as a result the statistics would not be re-enabled.

Preventing LFA from working in such cases would guarantee that we'll
always receive such indications and thus will fix statistics gathering.

Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-25 06:30:37 -07:00
Yuval Mintz
2f43b821b5 bnx2x: Fix self-test for 20g devices
20g-capable devices are not configured properly for self-test, using
10g as their speed which cause the link indication to remain down and
fail the internal loopback test.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-25 06:30:35 -07:00