Commit graph

287,481 commits

Author SHA1 Message Date
Francisco Jerez
8a389cac1f drm/i915: Fix command parser to validate multiple register access with the same command.
Until now the software command checker assumed that commands could
read or write at most a single register per packet.  This is not
necessarily the case, MI_LOAD_REGISTER_IMM expects a variable-length
list of offset/value pairs and writes them in sequence.  The previous
code would only check whether the first entry was valid, effectively
allowing userspace to write unrestricted registers of the MMIO space
by sending a multi-register write with a legal first register, with
potential security implications on Gen6 and 7 hardware.

Fix it by extending the drm_i915_cmd_descriptor table to represent
multi-register access and making validate_cmd() iterate for all
register offsets present in the command packet.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-15 16:00:28 +03:00
Suthikulpanit, Suravee
e144cd045e ufs: fix TRUE and FALSE re-define build error
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Vinayak Holikatti <vinholikatti@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:40:50 +02:00
Suthikulpanit, Suravee
ad466c6c1e megaraid_sas: fix TRUE and FALSE re-define build error
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Kashyap Desai <kashyap.desai@avagotech.com>
Cc: Sumit Saxena <sumit.saxena@avagotech.com>
Cc: Uday Lingala <uday.lingala@avagotech.com>
Acked-by: Sumit Saxena <sumit.saxena@avagotech.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:40:50 +02:00
Suthikulpanit, Suravee
c9a49642ae amd-xgbe: Unify coherency checking logic with device_dma_is_coherent()
Currently, amd-xgbe driver has separate logic to determine device
coherency for DT vs. ACPI. This patch simplifies the code with
a call to device_dma_is_coherent().

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:40:49 +02:00
Suthikulpanit, Suravee
04825cfedf crypto: ccp - Unify coherency checking logic with device_dma_is_coherent()
Currently, the driver has separate logic to determine device coherency
for DT vs ACPI.  This patch simplifies the code with a call to
device_dma_is_coherent().

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:40:49 +02:00
Suthikulpanit, Suravee
05ca556003 device property: Introduces device_dma_is_coherent()
Currently, device drivers, which support both OF and ACPI,
need to call two separate APIs, of_dma_is_coherent() and
acpi_dma_is_coherent()) to determine device coherency attribute.

This patch simplifies this process by introducing a new device
property API, device_dma_is_coherent(), which calls the appropriate
interface based on the booting architecture.

Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:40:49 +02:00
Suthikulpanit, Suravee
d056267483 ACPI / scan: Parse _CCA and setup device coherency
This patch implements support for ACPI _CCA object, which is introduced in
ACPIv5.1, can be used for specifying device DMA coherency attribute.

The parsing logic traverses device namespace to parse coherency
information, and stores it in acpi_device_flags. Then uses it to call
arch_setup_dma_ops() when creating each device enumerated in DSDT
during ACPI scan.

This patch also introduces acpi_dma_is_coherent(), which provides
an interface for device drivers to check the coherency information
similarly to the of_dma_is_coherent().

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:40:48 +02:00
Rafael J. Wysocki
faacd5ad83 Merge branch 'acpi-scan' into acpi-cca 2015-06-15 14:38:55 +02:00
Lv Zheng
66db383439 ACPI / EC: Fix a code coverity issue when QR_EC transactions are failed.
When the QR_EC transaction fails, the EC_FLAGS_QUERY_PENDING flag prevents
the event handling work queue from being scheduled again.

Though there shouldn't be failed QR_EC transactions, and this gap was
efficiently used for catching and learning the SCI_EVT clearing timing
compliance issues, we need to fix this as we are not fully compatible
with all platforms/Windows to handle SCI_EVT clearing timing correctly.
Fixing this gives the EC driver the chances to recover from a state machine
failure.

So this patch fixes this issue. When nr_pending_queries drops to 0, it
clears EC_FLAGS_QUERY_PENDING at the proper position for different modes in
order to ensure that the SCI_EVT handling can proceed.

In order to be clearer for future ec_event_clearing modes, all checks in
this patch are written in the inclusive style, not the exclusive style.

Cc: 3.16+ <stable@vger.kernel.org> # 3.16+
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:35:59 +02:00
Lv Zheng
3cb02aeb28 ACPI / EC: Fix EC_FLAGS_QUERY_HANDSHAKE platforms using new event clearing timing.
It is reported that on several platforms, EC firmware will not respond
non-expected QR_EC (see EC_FLAGS_QUERY_HANDSHAKE, only write QR_EC when
SCI_EVT is set).

Unfortunately, ACPI specification doesn't define when the SCI_EVT should be
cleared by the firmware, thus the original implementation queued up second
QR_EC right after writing QR_EC command and before reading the returned
event value as at that time the SCI_EVT is ensured not cleared. This
behavior is also based on the assumption that the firmware should be able
to return 0x00 to indicate "no outstanding event". This behavior did fix
issues on Samsung platforms where the spurious query value of 0x00 is
supported and didn't break platforms in my test queue.

But recently, specific Acer, Asus, Lenovo platforms keep on blaming this
change.

This patch changes the behavior to re-check the SCI_EVT a bit later and
removes EC_FLAGS_QUERY_HANDSHAKE quirks, hoping this is the Windows
compliant EC driver behavior.

In order to be robust to the possible regressions, instead of removing the
quirk directly, this patch keeps the quirk code, removes the quirk users
and keeps old behavior for Samsung platforms.

Cc: 3.16+ <stable@vger.kernel.org> # 3.16+
Link: https://bugzilla.kernel.org/show_bug.cgi?id=94411
Link: https://bugzilla.kernel.org/show_bug.cgi?id=97381
Link: https://bugzilla.kernel.org/show_bug.cgi?id=98111
Reported-and-tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Reported-and-tested-by: Tigran Gabrielyan <tigrangab@gmail.com>
Reported-and-tested-by: Adrien D <ghbdtn@openmailbox.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:35:59 +02:00
Lv Zheng
1d68d2612c ACPI / EC: Add event clearing variation support.
We've been suffering from the uncertainty of the SCI_EVT clearing timing.
This patch implements 3 of 4 possible modes to handle SCI_EVT clearing
variations. The old behavior is kept in this patch.

Status: QR_EC is re-checked as early as possible after checking previous
        SCI_EVT. This always leads to 2 QR_EC transactions per SCI_EVT
        indication and the target may implement event queue which returns
        0x00 indicating "no outstanding event".
        This is proven to be a conflict against Windows behavior, but is
        still kept in this patch to make the EC driver robust to the
        possible regressions that may occur on Samsung platforms.
Query: QR_EC is re-checked after the target has handled the QR_EC query
       request command pushed by the host.
Event: QR_EC is re-checked after the target has noticed the query event
       response data pulled by the host.
       This timing is not determined by any IRQs, so we may need to use a
       guard period in this mode, which may explain the existence of the
       ec_guard() code used by the old EC driver where the re-check timing
       is implemented in the similar way as this mode.
Method: QR_EC is re-checked as late as possible after completing the _Qxx
        evaluation. The target may implement SCI_EVT like a level triggered
        interrupt.
        It is proven on kernel bugzilla 94411 that, Windows will have all
        _Qxx evaluations parallelized. Thus unless required by further
        evidences, we needn't implement this mode as it is a conflict of
        the _Qxx parallelism requirement.

Note that, according to the reports, there are platforms that cannot be
handled using the "Status" mode without enabling the
EC_FLAGS_QUERY_HANDSHAKE quirk. But they can be handled with the other
modes according to the tests (kernel bugzilla 97381).

The following log entry can be used to confirm the differences of the 3
modes as it should appear at the different positions for the 3 modes:
  Command(QR_EC) unblocked
Status: appearing after
         EC_SC(W) = 0x84
Query: appearing after
         EC_DATA(R) = 0xXX
       where XX is the event number used to determine _QXX
Event: appearing after first
         EC_SC(R) = 0xX0 SCI_EVT=x BURST=0 CMD=0 IBF=0 OBF=0
       that is next to the following log entry:
         Command(QR_EC) completed by hardware

Link: https://bugzilla.kernel.org/show_bug.cgi?id=94411
Link: https://bugzilla.kernel.org/show_bug.cgi?id=97381
Link: https://bugzilla.kernel.org/show_bug.cgi?id=98111
Reported-and-tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Reported-and-tested-by: Tigran Gabrielyan <tigrangab@gmail.com>
Reported-and-tested-by: Adrien D <ghbdtn@openmailbox.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:35:59 +02:00
Lv Zheng
9d8993be2d ACPI / EC: Convert event handling work queue into loop style.
During the period that a work queue is scheduled (queued up for run) but
hasn't been run, second schedule_work() could fail. This may not lead to
the loss of queries because QR_EC is always ensured to be submitted after
the work queue has been in the running state.

The event handling work queue can be changed into the loop style to allow
us to control the code in a more flexible way:
1. Makes it possible to add event=0x00 termination condition in the loop.
2. Increases the thoughput of the QR_EC transactions as the 2nd+ QR_EC
   transactions may be handled in the same work item used for the 1st QR_EC
   transaction, thus the delay caused by the 2nd+ work item scheduling can
   be eliminated.

Except the logging message changes and the throughput improvement, this
patch is just a funcitonal no-op.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Tested-by: Tigran Gabrielyan <tigrangab@gmail.com>
Tested-by: Adrien D <ghbdtn@openmailbox.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:35:59 +02:00
Lv Zheng
f8b8eb7153 ACPI / EC: Cleanup transaction state transition.
This patch collects transaction state transition code into one function. We
then could have a single function to maintain transaction transition
related behaviors. No functional changes.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Tested-by: Tigran Gabrielyan <tigrangab@gmail.com>
Tested-by: Adrien D <ghbdtn@openmailbox.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:35:58 +02:00
Damien Lespiau
caf4e25275 drm/i915: Make sure our labels start at column 0
I noticed one of those and it turned out we have a few lingering around.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-15 14:32:49 +02:00
Mathias Krause
0519ade718 ACPI / scan: constify ACPI device ids
Make the button ACPI device ID array static const. Safes us a little bit
of code.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:31:02 +02:00
Damien Lespiau
abd41dc93c drm/i915/skl: Add debug messages at the start/end of DMC firmware loading
It's handy to have debug message for the "big" events and this one
qualifies IMHO. Also helpful to see what's happening while we're loading
the firwmare and how much time it takes.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-15 14:30:47 +02:00
Damien Lespiau
78ace48cfe drm/i915: Remove unnecessary () used with WARN()
In Linux, macros are usually well done and protect their arguments
properly, even avoiding multiple evaluations of the parameters. Extra ()
are really not needed.

Cc: Suketu Shah <suketu.j.shah@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-15 14:30:18 +02:00
Mathias Krause
b03466883e ACPI / processor: constify DMI system id table
There is no need to have processor_power_dmi_table[] writeable, constify
it.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:29:48 +02:00
Mathias Krause
69cda6e0f0 ACPI / HED: constify ACPI device ids
Constify the acpi_hed_ids[] ACPI device IDs array -- no need to have it
writeable.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:28:32 +02:00
Mathias Krause
b2687cd7d5 ACPI / LPSS: constify device descriptors
The device descriptors are never written to -- even pointed to as
'const' from struct lpss_private_data. Make them r/o for real.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:26:25 +02:00
Mathias Krause
048d16da75 ACPI / battery: mark DMI table as __initconst
The bat_dmi_table[] DMI table is referenced from the __init function
acpi_battery_init_async() only. It and its referenced functions can
therefore be marked __initconst to free up ~1kB of runtime memory after
initialization is done.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:23:44 +02:00
Mathias Krause
27059b9132 ACPI / battery: minor tweaks to acpi_battery_units()
Make the acpi_battery_units() function take a const argument and return
a const char*, too. Also make it static. It probably doesn't matter, as
gcc will be clever enough to optimize and inline the code even without
these hints. However, we also get rid of a #ifdef block by moving the
function closer to its usage location, so it's at least a small gain in
code readability.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:23:06 +02:00
Mathias Krause
a465878455 ACPI / battery: constify the offset tables
The offset tables are only read, not modified. Make them const.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:21:22 +02:00
Alexandru M Stan
ff4378f4b8 mfd: cros_ec: spi: Add delay for asserting CS
Some ECs need a little time for waking up before they can accept
SPI data at a high speed. This is configurable via a DT property
"google,cros-ec-spi-pre-delay".

This patch makes the cros_ec_spi driver to cause a delay before
the beginning of a SPI transaction, to make sure that the EC has
already woken up, if the property has been defined in the DTS.

Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15 13:18:24 +01:00
Gwendal Grignou
57b33ff077 mfd: cros_ec: Support multiple EC in a system
Chromebooks can have more than one Embedded Controller so the
cros_ec device id has to be incremented for each EC registered.

Add a new structure to represent multiple EC as different char
devices (e.g: /dev/cros_ec, /dev/cros_pd). It connects to
cros_ec_device and allows sysfs inferface for cros_pd.

Also reduce number of allocated objects, make chromeos sysfs
class object a static and add refcounting to prevent object
deletion while command is in progress.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15 13:18:23 +01:00
Stephen Barber
d365407079 mfd: cros_ec: add bus-specific proto v3 code
Add proto v3 support to the SPI, I2C, and LPC.

Signed-off-by: Stephen Barber <smbarber@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15 13:18:22 +01:00
Stephen Barber
2c7589af3c mfd: cros_ec: add proto v3 skeleton
Add support in cros_ec.c to handle EC host command protocol v3.
For v3+, probe for maximum shared protocol version and max
request, response, and passthrough sizes. For now, this will
always fall back to v2, since there is no bus-specific code
for handling proto v3 packets.

Signed-off-by: Stephen Barber <smbarber@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15 13:18:21 +01:00
Javier Martinez Canillas
062476f24a mfd: cros_ec: Move protocol helpers out of the MFD driver
The MFD driver should only have the logic to instantiate its child devices
and setup any shared resources that will be used by the subdevices drivers.

The cros_ec MFD is more complex than expected since it also has helpers to
communicate with the EC. So the driver will only get more bigger as other
protocols are supported in the future. So move the communication protocol
helpers to its own driver as drivers/platform/chrome/cros_ec_proto.c.

Suggested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15 13:18:20 +01:00
Stephen Barber
256ab950bd mfd: cros_ec: rev cros_ec_commands.h
Update cros_ec_commands.h to the latest version in the EC
firmware sources and add power domain and passthru commands.

Also, update lightbar to use new command names.

Signed-off-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15 13:18:20 +01:00
Javier Martinez Canillas
a841178445 mfd: cros_ec: Use a zero-length array for command data
Commit 1b84f2a4cd ("mfd: cros_ec: Use fixed size arrays to transfer
data with the EC") modified the struct cros_ec_command fields to not
use pointers for the input and output buffers and use fixed length
arrays instead.

This change was made because the cros_ec ioctl API uses that struct
cros_ec_command to allow user-space to send commands to the EC and
to get data from the EC. So using pointers made the API not 64-bit
safe. Unfortunately this approach was not flexible enough for all
the use-cases since there may be a need to send larger commands
on newer versions of the EC command protocol.

So to avoid to choose a constant length that it may be too big for
most commands and thus wasting memory and CPU cycles on copy from
and to user-space or having a size that is too small for some big
commands, use a zero-length array that is both 64-bit safe and
flexible. The same buffer is used for both output and input data
so the maximum of these values should be used to allocate it.

Suggested-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15 13:18:19 +01:00
Todd Broch
bb03ffb96c mfd: cros_ec: Instantiate sub-devices from device tree
If the EC device tree node has sub-nodes, try to instantiate them as
MFD sub-devices.  We can configure the EC features provided by the board.

Signed-off-by: Todd Broch <tbroch@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15 13:18:18 +01:00
Gwendal Grignou
e7b707f968 mfd: cros_ec: Remove parent field
Parent and device were pointing to the same device structure.

Parent is unused, removed.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Stephen Barber <smbarber@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Puthikorn Voravootivat <puthik@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15 13:18:17 +01:00
Mathias Krause
44f610cdfb ACPI / AC: constify DMI system id table
There is no need to have ac_dmi_table[] writeable, constify it.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:14:49 +02:00
Mathias Krause
4a4f01a6af ACPI / video: constify ACPI and DMI id tables
Make the video ACPI device ID array static and constify the DMI system
IDs array.  Saves us a little bit of code.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:12:17 +02:00
Hans de Goede
654a182d85 ACPI / video: Add a parameter to not register the backlight sysfs interface
On some systems acpi-video backlight is broken in the sense that it cannot
control the brightness of the backlight, but it must still be called on
resume to power-up the backlight after resume.

This commit allows these systems to work by going through all the usual
backlight control moves, while not registering a sysfs backlight
interface.

This commit also adds a quirk enabling this parameter on Toshiba Portege
R830 systems which are known to be affected by this.

I wish there was a better way to deal with this, but we've been unable to
find one.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=21012
Link: https://bugs.freedesktop.org/show_bug.cgi?id=82634
Reported-and-tested-by: Sylvain Pasche <sylvain.pasche@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 13:55:00 +02:00
Hans de Goede
7f5c1882ad ACPI / video: Add enable_native_backlight quirk for MacbookPro12,1
It seems that the latest generation of MacbookPro needs to use the
native backlight driver, just like most modern laptops do, but it does
not automatically get enabled as the Apple BIOS does not advertise
Windows 8 compatibility. So add a quirk for this.

Reported-by: Christopher Beland <beland@alum.mit.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 13:53:16 +02:00
Jani Nikula
245ec9d856 Revert "drm/i915: Don't skip request retirement if the active list is empty"
This reverts commit 0aedb16265.

I messed things up while applying [1] to drm-intel-fixes. Rectify.

[1] http://mid.gmane.org/1432827156-9605-1-git-send-email-ville.syrjala@linux.intel.com

Fixes: 0aedb16265 ("drm/i915: Don't skip request retirement if the active list is empty")
Cc: stable@vger.kernel.org
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-15 14:32:54 +03:00
Francisco Jerez
d351f6d948 drm/i915: Add SCRATCH1 and ROW_CHICKEN3 to the register whitelist.
Only bit 27 of SCRATCH1 and bit 6 of ROW_CHICKEN3 are allowed to be
set because of security-sensitive bits we don't want userspace to mess
with.  On HSW hardware the whitelisted bits control whether atomic
read-modify-write operations are performed on L3 or on GTI, and when
set to L3 (which can be 10x-30x better performing than on GTI,
depending on the application) require great care to avoid a system
hang, so we currently program them to be handled on GTI by default.

Beignet can immediately start taking advantage of this change to
enable L3 atomics.  Mesa should eventually switch to L3 atomics too,
but a number of non-trivial changes are still required so it will
continue using GTI atomics for now.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-15 12:34:58 +02:00
Francisco Jerez
4e86f725ce drm/i915: Extend the parser to check register writes against a mask/value pair.
In some cases it might be unnecessary or dangerous to give userspace
the right to write arbitrary values to some register, even though it
might be desirable to give it control of some of its bits.  This patch
extends the register whitelist entries to contain a mask/value pair in
addition to the register offset.  For registers with non-zero mask,
any LRM writes and LRI writes where the bits of the immediate given by
the mask don't match the specified value will be rejected.

This will be used in my next patch to grant userspace partial write
access to some sensitive registers.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-15 12:34:50 +02:00
Francisco Jerez
6a65c5b932 drm/i915: Fix command parser to validate multiple register access with the same command.
Until now the software command checker assumed that commands could
read or write at most a single register per packet.  This is not
necessarily the case, MI_LOAD_REGISTER_IMM expects a variable-length
list of offset/value pairs and writes them in sequence.  The previous
code would only check whether the first entry was valid, effectively
allowing userspace to write unrestricted registers of the MMIO space
by sending a multi-register write with a legal first register, with
potential security implications on Gen6 and 7 hardware.

Fix it by extending the drm_i915_cmd_descriptor table to represent
multi-register access and making validate_cmd() iterate for all
register offsets present in the command packet.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-15 12:34:26 +02:00
Takeshi Yoshimura
85a5965e1d wm831x_power: Fix off-by-one at free_irq()
An error handling in wm831x_power_probe() mistakenly frees a failed-to-
request irq as well as other irqs. I added missing decrement of the loop
counter.

Signed-off-by: Takeshi Yoshimura <yos@sslab.ics.keio.ac.jp>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-06-15 12:30:32 +02:00
Ville Syrjälä
fcc0008fd0 drm/i915: Bump CHV PFI credits to 63 when cdclk>=czclk
Switch from using 31 PFI credits to 63 PFI credits when cdclk>=czclk on
CHV. The spec lists both 31 and 63 as "suggested" values, but based on
feedback from hardware folks we should actually be using 63. Originally
I picked the 31 basically by flipping a coin.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-15 12:25:47 +02:00
Kalle Valo
d9378080a1 Merge ath-next from ath.git
Major changes:

wil6210:

* add modparam for bcast ring size
* support hidden SSID
* add per-MCS Rx stats
2015-06-15 13:25:32 +03:00
Thomas Richter
ac3f918d5a Fix resume from suspend on IBM X30
This patch fixes the resume from suspend-to-ram on the IBM X30
laptop. The problem is caused by the Bios missing to re-initialize
the iVCH registers, especially the PLL registers.

This patch records the iVCH registers during initialization, and
re-installs this register set when resuming.

Signed-off-by: Thomas Richter <thor@math.tu-berlin.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-15 12:21:01 +02:00
Dan Streetman
2c6f6eabc0 crypto: nx - replace NX842_MEM_COMPRESS with function
Replace the NX842_MEM_COMPRESS define with a function that returns the
specific platform driver's required working memory size.

The common nx-842.c driver refuses to load if there is no platform
driver present, so instead of defining an approximate working memory
size that's the maximum approximate size of both platform driver's
size requirements, the platform driver can directly provide its
specific, i.e. sizeof(struct nx842_workmem), size requirements which
the 842-nx crypto compression driver will use.

This saves memory by both reducing the required size of each driver
to the specific sizeof() amount, as well as using the specific loaded
platform driver's required amount, instead of the maximum of both.

Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-15 18:15:57 +08:00
Dan Streetman
32be6d3e36 crypto: nx - move include/linux/nx842.h into drivers/crypto/nx/nx-842.h
Move the contents of the include/linux/nx842.h header file into the
drivers/crypto/nx/nx-842.h header file.  Remove the nx842.h header
file and its entry in the MAINTAINERS file.

The include/linux/nx842.h header originally was there because the
crypto/842.c driver needed it to communicate with the nx-842 hw
driver.  However, that crypto compression driver was moved into
the drivers/crypto/nx/ directory, and now can directly include the
nx-842.h header.  Nothing else needs the public include/linux/nx842.h
header file, as all use of the nx-842 hardware driver will be through
the "842-nx" crypto compression driver, since the direct nx-842 api is
very limited in the buffer alignments and sizes that it will accept,
and the crypto compression interface handles those limitations and
allows any alignment and size buffers.

Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-15 18:15:56 +08:00
Stanislaw Gruszka
ed8e0ed53b rt2800: fix assigning same WCID for different stations
On some hardware reading WCID entries table results getting 0xff
numbers, no matter of value written there before. This cause assigning
the same WCID for different stations and makes not possible to connect
to more than one station.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-15 13:13:50 +03:00
Mika Kuoppala
8a1ebd7480 drm/i915/gtt: Remove _single from page table allocator
We are always allocating a single page. No need to be verbose so
remove the suffix.

Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-15 12:13:14 +02:00
Mika Kuoppala
ea3f5d261f drm/i915/gtt: Don't leak scratch page on mapping error
Free the scratch page if dma mapping fails.

Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-15 12:12:42 +02:00
Imre Deak
66c826a175 drm/i915/vlv: fix RC6 residency time calculation
The divider value to convert from CZ clock rate to ms needs a +1
adjustment on VLV just like on CHV. This matches both the spec and
the accuracy test by pm_rc6_residency.

v2:
- simplify logic checking for the CHV 320MHz special case (Rodrigo)

Testcase: igt/pm_rc6_residency
Signed-off-by: Imre Deak <imre.deak@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76877
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-15 11:56:37 +02:00