Commit graph

287,481 commits

Author SHA1 Message Date
Viresh Kumar
9591becbf2 cpufreq: Restart governor as soon as possible
__cpufreq_remove_dev_finish() is doing two things today:
- Restarts the governor if some CPUs from concerned policy are still
  online.
- Frees the policy if all CPUs are offline.

The first task of restarting the governor can be moved to
__cpufreq_remove_dev_prepare() to restart the governor early. There is
no race between _prepare() and _finish() as they would be handling
completely different cases. _finish() will only be required if we are
going to free the policy and that has nothing to do with restarting the
governor.

Original-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-11 01:02:45 +02:00
Viresh Kumar
3654c5cc81 cpufreq: Call cpufreq_policy_put_kobj() from cpufreq_policy_free()
cpufreq_policy_put_kobj() is actually part of freeing the policy and can
be called from cpufreq_policy_free() directly instead of a separate
call.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-11 01:02:40 +02:00
Viresh Kumar
2fc3384dc7 cpufreq: Initialize policy->kobj while allocating policy
policy->kobj is required to be initialized once in the lifetime of a
policy.  Currently we are initializing it from __cpufreq_add_dev() and
that doesn't look to be the best place for doing so as we have to do
this on special cases (like: !recover_policy).

We can initialize it from a more obvious place cpufreq_policy_alloc()
and that will make code look cleaner, specially the error handling part.

The error handling part of __cpufreq_add_dev() was doing almost the same
thing while recover_policy is true or false. Fix that as well by always
calling cpufreq_policy_put_kobj() with an additional parameter to skip
notification part of it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-11 01:01:54 +02:00
Viresh Kumar
87549141d5 cpufreq: Stop migrating sysfs files on hotplug
When we hot-unplug a cpu, we remove its sysfs cpufreq directory and if
the outgoing cpu was the owner of policy->kobj earlier then we migrate
the sysfs directory to under another online cpu.

There are few disadvantages this brings:
- Code Complexity
- Slower hotplug/suspend/resume
- sysfs file permissions are reset after all policy->cpus are offlined
- CPUFreq stats history lost after all policy->cpus are offlined
- Special management of sysfs stuff during suspend/resume

To overcome these, this patch modifies the way sysfs directories are
managed:
- Select sysfs kobjects owner while initializing policy and don't change
  it during hotplugs. Track it with kobj_cpu created earlier.

- Create symlinks for all related CPUs (can be offline) instead of
  affected CPUs on policy initialization and remove them only when the
  policy is freed.

- Free policy structure only on the removal of cpufreq-driver and not
  during hotplug/suspend/resume, detected by checking 'struct
  subsys_interface *' (Valid only when called from
  subsys_interface_unregister() while unregistering driver).

Apart from this, special care is taken to handle physical hoplug of CPUs
as we wouldn't remove sysfs links or remove policies on logical
hotplugs. Physical hotplug happens in the following sequence.

Hot removal:
- CPU is offlined first, ~ 'echo 0 >
  /sys/devices/system/cpu/cpuX/online'
- Then its device is removed along with all sysfs files, cpufreq core
  notified with cpufreq_remove_dev() callback from subsys-interface..

Hot addition:
- First the device along with its sysfs files is added, cpufreq core
  notified with cpufreq_add_dev() callback from subsys-interface..
- CPU is onlined, ~ 'echo 1 > /sys/devices/system/cpu/cpuX/online'

We call the same routines with both hotplug and subsys callbacks, and we
sense physical hotplug with cpu_offline() check in subsys callback. We
can handle most of the stuff with regular hotplug callback paths and
add/remove cpufreq sysfs links or free policy from subsys callbacks.

Original-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-11 01:00:42 +02:00
Rafael J. Wysocki
b064a8fa77 ACPI / init: Switch over platform to the ACPI mode later
Commit 73f7d1ca32 "ACPI / init: Run acpi_early_init() before
timekeeping_init()" moved the ACPI subsystem initialization,
including the ACPI mode enabling, to an earlier point in the
initialization sequence, to allow the timekeeping subsystem
use ACPI early.  Unfortunately, that resulted in boot regressions
on some systems and the early ACPI initialization was moved toward
its original position in the kernel initialization code by commit
c4e1acbb35 "ACPI / init: Invoke early ACPI initialization later".

However, that turns out to be insufficient, as boot is still broken
on the Tyan S8812 mainboard.

To fix that issue, split the ACPI early initialization code into
two pieces so the majority of it still located in acpi_early_init()
and the part switching over the platform into the ACPI mode goes into
a new function, acpi_subsystem_init(), executed at the original early
ACPI initialization spot.

That fixes the Tyan S8812 boot problem, but still allows ACPI
tables to be loaded earlier which is useful to the EFI code in
efi_enter_virtual_mode().

Link: https://bugzilla.kernel.org/show_bug.cgi?id=97141
Fixes: 73f7d1ca32 "ACPI / init: Run acpi_early_init() before timekeeping_init()"
Reported-and-tested-by: Marius Tolzmann <tolzmann@molgen.mpg.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
2015-06-10 23:51:27 +02:00
Maxime Coquelin
8c9a8a8f71 clk: Move debug_node field under DEBUG_FS flag in struct clk_core
The debug_node field is only used when DEBUG_FS config is selected,
so declare it only if DEBUG_FS is selected.

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-10 14:21:22 -07:00
Daniel Thompson
3037e9ea78 clk: fixed: Add comment to clk_fixed_set_rate
Currently it is not made explicit why clk_fixed_set_rate() can ignore
its arguments and unconditionally return success. Add a comment
to explain this.

We also mark the clk_ops table const since it should never be
modified at runtime.

Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-10 14:19:43 -07:00
Stephen Boyd
b41c7bfa27 clk: cdce925: Fix printk size_t warning
drivers/clk/clk-cdce925.c:550: warning: format ‘%u’ expects type
‘unsigned int’, but argument 6 has type ‘size_t’

Cc: Mike Looijmans <mike.looijmans@topic.nl>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-10 14:16:36 -07:00
Mauro Carvalho Chehab
bc5e66bd25 [media] cx88: don't declare restart_video_queue if not used
While compiled on alpha, got this error:
	drivers/media/pci/cx88/cx88-video.c:415:12: warning: 'restart_video_queue' defined but not used [-Wunused-function]

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-10 17:58:00 -03:00
Geert Uytterhoeven
de667203fd block/ps3vram: Remove obsolete reference to MTD
The ps3vram driver is a plain block device driver since commit
f507cd2203 ("ps3/block: Replace mtd/ps3vram
by block/ps3vram").

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Acked-by: Jim Paris <jim@jtan.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-10 14:06:55 -06:00
Geoff Levand
e7bdd17b08 block/ps3vram: Fix sparse warnings
Fix sparse warnings like these:

 drivers/block/ps3vram.c: warning: incorrect type in assignment (different address spaces)
 drivers/block/ps3vram.c:    expected unsigned int [usertype] *ctrl
 drivers/block/ps3vram.c:    got void [noderef] <asn:2>*

Cc: Jim Paris <jim@jtan.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Acked-by: Jim Paris <jim@jtan.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-10 14:06:53 -06:00
Sonny Jiang
6d8db6ce23 drm/amdgpu: fix a amdgpu_dpm=0 bug
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-10 15:05:33 -04:00
Bjorn Helgaas
0c0cbb6c5a PCI/ASPM: Simplify Clock Power Management setting
Update the Link Control Enable Clock Power Management bit the same
way we update the ASPM Control bits, with a single call of
pcie_capability_clear_and_set_word().

No functional change; this just makes both paths use the same style.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-06-10 14:00:21 -05:00
Bjorn Helgaas
6cbb247e85 PCI: designware: Wait for link to come up with consistent style
All the DesignWare-based host drivers loop waiting for the link to come up,
but they do it several ways that are needlessly different.

Wait for the link to come up in a consistent style across all the
DesignWare drivers.  No functional change.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2015-06-10 13:52:59 -05:00
Bjorn Helgaas
1d3f9bac71 PCI: layerscape: Factor out ls_pcie_establish_link()
All other DesignWare-based drivers have a *_establish_link() function.

This functionality is trivial for Layerscape, but factor out a
ls_pcie_establish_link() for consistency with the other drivers.  No
functional change.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2015-06-10 13:52:46 -05:00
Bjorn Helgaas
1200edcbdd PCI: layerscape: Use dw_pcie_link_up() consistently
All the other DesignWare-based drivers use dw_pcie_link_up(), so use it in
this driver, too, for consistency.  No functional change.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2015-06-10 13:52:36 -05:00
Bjorn Helgaas
30fb7ba660 PCI: dra7xx: Use dw_pcie_link_up() consistently
We already use dw_pcie_link_up() once in dra7xx_pcie_establish_link(), but
we duplicate its code later.  Use dw_pcie_link_up() for consistency.  No
functional change.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2015-06-10 13:52:28 -05:00
Alex Deucher
633ed3df9a drm/amdgpu: don't enable/disable display twice on suspend/resume
We were doing it in the common code and in the IP specific code.
Remove the IP specific code.  The common code handles the
ordering properly.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-10 14:16:48 -04:00
Christian König
4802ce1177 drm/amdgpu: fix UVD/VCE VM emulation
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-10 14:16:48 -04:00
Axel Lin
366604ec0d regulator: max8973: Fix up ramp_delay for MAX8973_RAMP_25mV_PER_US case
Fix trivial typo.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-10 18:29:04 +01:00
Murali Karicheri
e0b047bd8f spi: davinci: change the lower limit of pre-scale divider to 1
SPI hardware spec for Keystone specify a lower value of 0 for pre-scale
divider which determine what max value of spi clock (spi-max-frequency)
the device can support. This translates to a clock divider of 2. So fix
the lower limit value used for the boundary check in
davinci_spi_get_prescale() function to 1 so that a maximum of spi device
clock rate / 2 is possible to be set for spi-max-frequency.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-10 18:28:04 +01:00
Lior Amsalem
fbea28a2af dmaengine: mv_xor: improve descriptors list handling and reduce locking
This patch change the way free descriptors are marked.

Instead of having a field for descriptor in use, all the descriptors in the
all_slots list are free for use.

This simplify the allocation method and reduce the locking needed.

Signed-off-by: Lior Amsalem <alior@marvell.com>
Reviewed-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-10 22:18:31 +05:30
Lior Amsalem
f1d25e0a9b dmaengine: mv_xor: Enlarge descriptor pool size
Now that we have 2 channels assigned to 2 CPUs and all requests are chained
on same channels, we need much more descriptors available to satisfy
async_tx workload.

3072 descriptors was found in our lab as the number of descriptors which
allow the async_tx stack to work without waiting for free descriptors on
submission of new requests.

Signed-off-by: Lior Amsalem <alior@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Tested-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-10 22:18:31 +05:30
Lior Amsalem
6f166312c6 dmaengine: mv_xor: add support for a38x command in descriptor mode
The Marvell Armada 38x SoC introduce new features to the XOR engine,
especially the fact that the engine mode (MEMCPY/XOR/PQ/etc) can be part of
the descriptor and not set through the controller registers.

This new feature allows mixing of different commands (even PQ) on the same
channel/chain without the need to stop the engine to reconfigure the engine
mode.

Refactor the driver to be able to use that new feature on the Armada 38x,
while keeping the old behaviour on the older SoCs.

Signed-off-by: Lior Amsalem <alior@marvell.com>
Reviewed-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-10 22:18:30 +05:30
Maxime Ripard
0951e728ff dmaengine: mv_xor: Rename function for consistent naming
The current function names isn't very consistent, and functions with the
same prefix might operate on either a channel or a descriptor, which is
kind of confusing.

Rename these functions to have a consistent and clearer naming scheme.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-10 22:18:30 +05:30
Lior Amsalem
9136291f1d dmaengine: mv_xor: bug fix for racing condition in descriptors cleanup
This patch fixes a bug in the XOR driver where the cleanup function can be
called and free descriptors that never been processed by the engine (which
result in data errors).

The cleanup function will free descriptors based on the ownership bit in
the descriptors.

Fixes: ff7b04796d ("dmaengine: DMA engine driver for Marvell XOR engine")
Signed-off-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Ofer Heifetz <oferh@marvell.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-10 22:18:30 +05:30
Sonny Jiang
b7a0776949 drm/amdgpu: enable vce powergating
Enable VCE dpm and powergating. VCE dpm dynamically scales the VCE clocks on
demand.

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
2015-06-10 11:54:16 -04:00
Rafael Lourenço de Lima Chehab
e42c8c6eb4 [media] au0828: move dev->boards atribuition to happen earlier
The attribution of dev->boards occured too late, which
would couse an OOPS in media controller registration.

Signed-off-by: Rafael Lourenço de Lima Chehab <chehabrafael@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-10 12:39:35 -03:00
Greg Kroah-Hartman
0e6c861f73 Revert "base/platform: Only insert MEM and IO resources"
This reverts commit 36d4b29260 as it
breaks working machines.

Cc: Rob Herring <robh@kernel.org>
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-10 08:38:29 -07:00
Greg Kroah-Hartman
5da7f70997 Revert "base/platform: Continue on insert_resource() error"
This reverts commit e50e69d1ac as it
breaks working machines.

Cc: Rob Herring <robh@kernel.org>
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-10 08:38:02 -07:00
Malcolm Priestley
48c91aadc5 [media] lmedm04: implement dvb v5 statistics
Indroduce function lme2510_update_stats to update
statistics directly from usb interrupt.

Provide signal and snr wrap rounds for dvb v3 functions.

Block and post bit are not available.

When i2c_talk_onoff is on no statistics are available,
with possible future hand over to the relevant frontend/tuner.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-10 12:37:54 -03:00
Greg Kroah-Hartman
8171d5f7bf Revert "of/platform: Use platform_device interface"
This reverts commit b6d2233f29 as it
breaks working machines.

Cc: Rob Herring <robh@kernel.org>
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-10 08:37:35 -07:00
Greg Kroah-Hartman
8b2dcebae3 Revert "base/platform: Remove code duplication"
This reverts commit 6d9d4b1469 as it
breaks working machines.

Cc: Rob Herring <robh@kernel.org>
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-10 08:36:50 -07:00
Mauro Carvalho Chehab
baa1fb504c [media] bdisp: remove unused var
Fix the following warning:

drivers/media/platform/sti/bdisp/bdisp-v4l2.c: In function 'bdisp_register_device':
drivers/media/platform/sti/bdisp/bdisp-v4l2.c:1024:26: warning: variable 'pdev' set but not used [-Wunused-but-set-variable]
  struct platform_device *pdev;

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-10 12:30:52 -03:00
Fabien Dessenne
1a8b18afa1 [media] bdisp: remove needless check
As reported by smatch:
	drivers/media/platform/sti/bdisp/bdisp-v4l2.c:947 bdisp_s_selection() warn: unsigned 'out.width' is never less than zero.
	drivers/media/platform/sti/bdisp/bdisp-v4l2.c:947 bdisp_s_selection() warn: unsigned 'out.height' is never less than zero.
Indeed, width and height are unsigned.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-10 12:29:55 -03:00
Mauro Carvalho Chehab
87b09bd048 ts2020: fix compilation on i386
drivers/built-in.o: In function `ts2020_read_signal_strength':
ts2020.c:(.text+0x298ff94): undefined reference to `__divdi3'
ts2020.c:(.text+0x298ffd4): undefined reference to `__divdi3'
ts2020.c:(.text+0x298fffd): undefined reference to `__divdi3'
Makefile:921: recipe for target 'vmlinux' failed

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-10 12:26:18 -03:00
Mauro Carvalho Chehab
9d605e6359 [media] mantis: cleanup CodingStyle issues due to last commit
Commit a96762da0cfc('[media] mantis: add remote control support')
introduced some new CodingStyle issues. Fix them.

No functional changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-10 12:06:34 -03:00
Jan Klötzke
a96762da0c [media] mantis: add remote control support
The embedded UART is apparently used to receive decoded IR (RC5?) codes.
Forward these scan codes to the RC framework and (where known) add
corresponding mapping tables to translate them into regular keys.

This patch has been tested on a TechniSat CableStar HD2. The mappings of other
rc-maps were taken from Christoph Pinkl's patch
(http://patchwork.linuxtv.org/patch/7217/) and the s2-liplianin repository. The
major difference to Christoph's patch is a reworked interrupt handling of the
UART because the RX interrupt is apparently level triggered and requires
masking until the FIFO is read by the UART worker.

Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-10 11:58:24 -03:00
Jan Klötzke
1c35cf9cca [media] rc/keymaps: add keytable for Twinhan DTV CAB CI
This RC map was taken from Christoph Pinkl's patch
(http://patchwork.linuxtv.org/patch/7217/). It is used solely by the respective
mantis based card because the encoding is not known.

Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-10 11:52:25 -03:00
Jan Klötzke
578e95dd38 [media] rc/keymaps: add keytable for Terratec Cinergy S2 HD
This RC map was taken from Christoph Pinkl's patch
(http://patchwork.linuxtv.org/patch/7217/). It is used solely by the respective
mantis based card because the encoding is not known.

Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-10 11:51:41 -03:00
Jan Klötzke
4862690d82 [media] rc/keymaps: add keytable for Terratec Cinergy C PCI
This RC map was taken from Christoph Pinkl's patch
(http://patchwork.linuxtv.org/patch/7217/). It is used solely by the respective
mantis based card because the encoding is not known.

Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-10 11:51:01 -03:00
Jan Klötzke
9b6a065e79 [media] rc/keymaps: add RC keytable for TechniSat TS35
The TS35 remote is distributed with TechniSat CableStar HD2 cards (mantis
chipset). The exact protocol type is unknown, making this rc map probably only
usable by mantis cards.

Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-10 11:50:04 -03:00
Dan Carpenter
8d7e506350 [media] dvb-core: prevent some corruption the legacy ioctl
Quite a few of the ->diseqc_send_master_cmd() implementations don't
check cmd->msg_len so it can lead to memory corruption.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-10 11:47:56 -03:00
Olli Salonen
5dce1ee611 [media] saa7164: Improvements for I2C handling"
This reverts commit ad90b6b0f1.

This patch breaks I2C communication towards Si2168. After reverting and
applying the other patch in this series the I2C communication is
correct.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-10 11:46:03 -03:00
Olli Salonen
d976872891 [media] saa7164: change Si2168 reglen to 0 bit
The i2c_reg_len for Si2168 should be 0 for correct I2C communication.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-10 11:44:44 -03:00
Vaishali Thakkar
555416f987 [media] s5k5baf: Convert use of __constant_cpu_to_be16 to cpu_to_be16
In little endian cases, macro cpu_to_be16 unfolds to __swab16 which
provides special case for constants. In big endian cases,
__constant_cpu_to_be16 and cpu_to_be16 expand directly to the
same expression. So, replace __constant_cpu_to_be16 with
cpu_to_be16 with the goal of getting rid of the definition of
__constant_cpu_to_be16 completely.

The semantic patch that performs this transformation is as follows:

@@expression x;@@

- __constant_cpu_to_be16(x)
+ cpu_to_be16(x)

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-10 11:43:19 -03:00
Frans Klaver
f4ed950a63 sbs-battery: add option to always register battery
Commit a22b41a31e ("sbs-battery: Probe should try talking to the
device") introduced a step in probing the SBS battery, that tries to
talk to the device before actually registering it, saying:

    this driver doesn't actually try talking to the device at probe
    time, so if it's incorrectly configured in the device tree or
    platform data (or if the battery has been removed from the system),
    then probe will succeed and every access will sit there and time
    out. The end result is a possibly laggy system that thinks it has a
    battery but can never read status, which isn't very useful.

Which is of course reasonable. However, it is also very well possible
for a device to boot up on wall-power and be connected to a battery
later on. This is a scenario that the driver supported before said patch
was applied, and even easily achieved by booting up with the battery
attached and removing it later on. sbs-battery's 'present' sysfs file
can be used to determine if the device is available or not.

So with automated device detection lacking for now, in some cases it is
possible that one wants to register a battery, even if none are attached
at the moment. To facilitate this, add a module parameter that can be
used to configure forced loading module loading time. If set, the battery
will always be registered without checking the sanity of the connection.

Signed-off-by: Frans Klaver <frans.klaver@xsens.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-06-10 16:18:46 +02:00
Hans de Goede
fe27e1dfe9 power: Add devm_power_supply_get_by_phandle() helper function
This commit adds a resource-managed version of the
power_supply_get_by_phandle() function.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-06-10 16:15:54 +02:00
Krzysztof Kozlowski
a6e6b63ee2 power_supply: max17042: Add OF support for setting thresholds
The commit edd4ab0559 ("power: max17042_battery: add HEALTH and TEMP_*
properties support") added support for setting voltage and temperature
thresholds with platform data. For DeviceTree default of 0 was always
used.

This caused reporting battery health always as over voltage or
over heated.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: edd4ab0559 ("power: max17042_battery: add HEALTH and TEMP_* properties support")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-06-10 16:14:03 +02:00
Malcolm Priestley
9e8715c91d [media] lmedm04: Enable dont_poll for TS2020 tuner
Following a change made to TS2020 tuner in patches
ts2020: Provide DVBv5 API signal strength
ts2020: Allow stats polling to be suppressed

Polling on the driver must be suppressed because
the demuxer is stopped by I2C messages.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-10 11:12:42 -03:00