Commit graph

287,481 commits

Author SHA1 Message Date
Mauro Carvalho Chehab
2f60f13c14 [media] drxk: better handle errors
As reported by smatch:
	drivers/media/dvb-frontends/drxk_hard.c:3277 dvbt_sc_command() warn: missing break? reassigning 'status'

This is basically because the error handling logic there was crappy.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-05 07:58:52 -03:00
Mauro Carvalho Chehab
84cb7be43c [media] vivid: don't use more than 1024 bytes of stack
Remove the following compilation warnings:

	drivers/media/platform/vivid/vivid-tpg.c: In function 'tpg_gen_text':
	drivers/media/platform/vivid/vivid-tpg.c:1562:1: warning: the frame size of 1308 bytes is larger than 1024 bytes [-Wframe-larger-than=]
	 }
	 ^

This seems to be due to some bad optimization done by gcc.

Moving the for() loop to happen inside the macro solves the
issue.

While here, fix CodingStyle at the switch().

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
2015-06-05 07:41:54 -03:00
Jarkko Nikula
82ba2c2ab3 spi: pxa2xx: Make LPSS SPI general register optional
General register located in LPSS SPI private register space is not found in
upcoming Intel LPSS platforms. Access it conditionally depending is it
defined in configuration.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05 11:40:45 +01:00
Jarkko Nikula
dccf736965 spi: pxa2xx: Prepare for new Intel LPSS SPI type
Some of the Intel LPSS SPI properties will be different in upcoming
platforms compared to existing Lynxpoint and BayTrail/Braswell. LPSS SPI
private registers will be at different offset and there will be changes in
individual registers and default FIFO thresholds too.

Add configuration for these differences and use them in runtime based on
LPSS SSP type. With this change private registers offset autodetection
becomes needless.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05 11:40:45 +01:00
Jarkko Nikula
03fbf488ce spi: pxa2xx: Differentiate Intel LPSS types
Intel LPSS SPI properties differ between between platforms. Now private
registers offset 0x400 or 0x800 is autodetected but there is need to
support also other offset and handle a few other differences.

Prepare for that by splitting the LPSS_SSP type into compatible hardware
types and set it now based on PCI or ACPI ID. That type will be used to set
properties that differ between current and upcoming platforms.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05 11:40:45 +01:00
Marek Szyprowski
1d03deff82 [media] media: s5p-mfc: fix sparse warnings
Commits a0f10c131c and
6c9fe76536 ("media: s5p-mfc: fix broken
pointer cast on 64bit arch") fixed issue with lossy cast on 64-bit
architectures. However it also removed __iomem attribute from that cast.
This leads to sparse warnings. This patch fixes those warnings by adding
__iomem cast in case of v6+ code version and replacing readl/writel by
simple u32 load/store operations in case of v5 code (which is called on
system memory allocated by dma_alloc_coherent() instead of io registers).

Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-05 06:37:24 -03:00
Lad, Prabhakar
e9763995e7 [media] media: davinci: vpbe: use v4l2_get_timestamp()
this patch makes use of helper function v4l2_get_timestamp()
to set the timestamp of vb2 buffer.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-05 06:36:23 -03:00
Lad, Prabhakar
4f26aa1786 [media] media: davinci_vpfe: use monotonic timestamp
V4L2 drivers should use MONOTONIC timestamps instead of gettimeofday,
which is affected by daylight savings time.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-05 06:36:03 -03:00
Lad, Prabhakar
171fe6d127 [media] media: davinci_vpfe: set minimum required buffers to three
this patch sets nbuffers to three or more and drops the
unset member video_limit which just a copy paste from
earlier driver.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-05 06:35:41 -03:00
Lad, Prabhakar
694f9963ed [media] media: davinci_vpfe: clear the output_specs
clear of the output_specs before passing it to the
configure_resizer_out_params(), so that no garbage values
are set.

This fixes following build warning:
drivers/staging/media/davinci_vpfe/dm365_resizer.c: In function 'resizer_set_stream':
drivers/staging/media/davinci_vpfe/dm365_resizer.c:190:46: warning: 'output_specs.vst_c'
may be used uninitialized in this function [-Wmaybe-uninitialized]
  param->ext_mem_param[index].rsz_sdr_ptr_s_c = output->vst_c;
                                              ^
drivers/staging/media/davinci_vpfe/dm365_resizer.c:316:30: note: 'output_specs.vst_c' was declared here
  struct vpfe_rsz_output_spec output_specs;
                              ^

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-05 06:34:48 -03:00
Antti Palosaari
2f1ea29fca [media] si2157: implement signal strength stats
Implement DVBv5 signal strength stats. Returns dBm.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Tested-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-05 06:33:45 -03:00
Antti Palosaari
d2b72f6482 [media] si2168: Implement own I2C adapter locking
We need own I2C locking because of tuner I2C adapter/repeater.
Firmware command is executed using I2C send + reply message. Default
I2C adapter locking protects only single I2C operation, not whole
send + reply sequence as needed. Due to that, it was possible tuner
I2C message interrupts firmware command sequence.

Reported-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-05 06:32:05 -03:00
Rodrigo Vivi
bf546f8158 drm/i915/skl: Fix DMC API version in firmware file name
04 is the minor version. API version is ver1.
So let's follow same scheme used on published version at 01.org.

If really needed the minor version a follow-up updated will be
done. But for now we need to move fwd and unblock end users.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-05 12:08:01 +03:00
Hans de Goede
088df2ccef Input: alps - do not reduce trackpoint speed by half
On some v7 devices (e.g. Lenovo-E550) the deltas reported are typically
only in the 0-1 range dividing this by 2 results in a range of 0-0.

And even for v7 devices where this does not lead to making the trackstick
entirely unusable, it makes it twice as slow as before we added v7 support
and were using the ps/2 mouse emulation of the dual point setup.

If some kind of generic slowdown is actually necessary for some devices,
then that belongs in userspace, not in the kernel.

Cc: stable@vger.kernel.org
Reported-and-tested-by: Rico Moorman <rico.moorman@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-04 22:34:40 -07:00
洪一竹
692dd19164 Input: elantech - add new icbody type
This adds new icbody type to the list recognized by Elantech PS/2 driver.

Cc: stable@vger.kernel.org
Signed-off-by: Sam Hung <sam.hung@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-04 22:34:39 -07:00
Anjali Singhai Jain
fa11cb3d16 i40e: Make sure to be in VEB mode if SRIOV is enabled at probe
If SRIOV is enabled we need to be in VEB mode not VEPA mode at probe.
This fixes an NPAR bug when SRIOV is enabled in the BIOS.

Change-ID: Ibf006abafd9a0ca3698ec24848cd771cf345cbbc
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-04 20:14:23 -07:00
Anjali Singhai Jain
fc60861e9b i40e: start up in VEPA mode by default
The patch fixes a bug in the default configuration which
prevented a software bridge loaded on the PF interface from
working correctly because broadcast packets are incorrectly
looped back.

Fix the general case, by loading the driver in VEPA mode Until a
VF or VMDq VSI is added. This way loopback on the Main VSI is
turned off until needed and can resolve the issue of unnecessary
reflection for users that do not have VF or VMDq VSIs setup.

The driver must now coordinate the loopback setting for the Flow
Director (FDIR) VSI to make sure it is in sync with the current
VEB or VEPA mode setting.

The user can still switch bridge modes from the bridge commands and
choose to be in VEPA mode with VF VSIs. Because of hardware
requirements, the call to switch to VEB mode when no VF/VMDqs are
present will be rejected.

NOTE: This patch uses BIT_ULL as that is preferred going forward,
a followup patch in the lower priority queue to net-next will fix
up the remaining 1 << usages.

Change-ID: Ib121ddb18fe4b3c4f52e9deda6fcbeb9105683d1
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-04 20:10:30 -07:00
Anjali Singhai Jain
30520831f0 i40e/i40evf: Fix mixed size frags and linearization
This patch fixes a bug where the i40e Tx queue will hang if this
skb is passed to the driver.

With mixed size fragments while using TSO there was a corner case
where we needed to linearize but we were not. This was seen with
iSCSI traffic and could be reproduced with a frag list that looks
like this:

num_frags = 17, gso_segs = 17, hdr_len = 66,
skb_shinfo(skb)->gso_size = 1448
size = 3002, j = 1, frag_size = 2936, num_frags = 17
size = 4268, j = 1, frag_size = 4096, num_frags = 16
size = 5534, j = 1, frag_size = 4096, num_frags = 15
size = 5352, j = 1, frag_size = 4096, num_frags = 14
size = 5170, j = 1, frag_size = 4096, num_frags = 13
size = 3468, j = 1, frag_size = 2576, num_frags = 12
size = 750, j = 1, frag_size = 112, num_frags = 11
size = 862, j = 2, frag_size = 112, num_frags = 10
size = 974, j = 3, frag_size = 112, num_frags = 9
size = 1126, j = 4, frag_size = 152, num_frags = 8
size = 1330, j = 5, frag_size = 204, num_frags = 7
size = 1534, j = 6, frag_size = 204, num_frags = 6
size = 356, j = 1, frag_size = 204, num_frags = 5
size = 560, j = 2, frag_size = 204, num_frags = 4
size = 764, j = 3, frag_size = 204, num_frags = 3
size = 968, j = 4, frag_size = 204, num_frags = 2
size = 1140, j = 5, frag_size = 172, num_frags = 1
result: linearize = 0, j = 6

Change-ID: I79bb1aeab0af255fe2ce28e93672a85d85bf47e8
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-04 20:06:06 -07:00
Geert Uytterhoeven
f76502aa91 of/dynamic: Fix test for PPC_PSERIES
"IS_ENABLED(PPC_PSERIES)" always evaluates to false, as IS_ENABLED() is
supposed to be used with the full Kconfig symbol name, including the
"CONFIG_" prefix.

Add the missing "CONFIG_" prefix to fix this.

Fixes: a25095d451 ("of: Move dynamic node fixups out of powerpc and into common code")

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org #+3.17
Signed-off-by: Grant Likely <grant.likely@linaro.org>
2015-06-05 10:39:28 +09:00
Rob Herring
63a4aea556 of: clean-up unnecessary libfdt include paths
With the libfdt include fixups to use "" instead of <> in the
latest dtc import in commit 4760597 (scripts/dtc: Update to upstream
version 9d3649bd3be245c9), it is no longer necessary to add explicit
include paths to use libfdt. Remove these across the kernel.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: linux-mips@linux-mips.org
Cc: linuxppc-dev@lists.ozlabs.org
2015-06-04 20:16:47 -05:00
Rob Herring
649e0a77e2 of: make unittest select OF_EARLY_FLATTREE instead of depend on it
The DT unittest currently requires an arch (typically) to select
OF_EARLY_FLATTREE. Remove this dependency by selecting it directly so that
the unittest can be enabled easily on any architecture. With this and the
prior commit, we can easily enable and run unittests starting with x86
defconfig rather than hunting for the combination of config options to
enable OF on x86.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Acked-by: Grant Likely <grant.likely@lianro.org>
2015-06-04 20:16:46 -05:00
Rob Herring
0166dc11be of: make CONFIG_OF user selectable
With the addition of overlays, it is now plausible to use DT on any arch
and without an arch using it at boot time. It is also desirable to
expand the compile coverage of the DT code. Make CONFIG_OF user
selectable by converting the menu to menuconfig.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Acked-by: Grant Likely <grant.likely@lianro.org>
2015-06-04 20:16:01 -05:00
Dave Airlie
a93fe8f8b4 Merge branch 'drm-next-4.2-amdgpu' of git://people.freedesktop.org/~agd5f/linux into drm-next
This is the big pull request for amdgpu, the new driver for VI+ AMD
asics.  I currently supports Tonga, Iceland, and Carrizo and also
contains a Kconfig option to build support for CI parts for testing.

All major functionality is supported (displays, gfx, compute, dma,
video decode/encode, etc.).  Power management is working on Carrizo,
but is still being worked on for Tonga and Iceland.

* 'drm-next-4.2-amdgpu' of git://people.freedesktop.org/~agd5f/linux: (106 commits)
  drm/amdgpu: only support IBs in the buffer list (v2)
  drm/amdgpu: add vram_type and vram_bit_width for interface query (v2)
  drm/amdgpu: add ib_size/start_alignment interface query
  drm/amdgpu: add me/ce/pfp_feature_version interface query
  drm/amdgpu add ce_ram_size for interface query
  drm/amdgpu add max_memory_clock for interface query (v2)
  drm/amdgpu: add hdp flush for gfx8 compute ring
  drm/amdgpu: fix no hdp flush for compute ring
  drm/amdgpu: add HEVC/H.265 UVD support
  drm/amdgpu: stop loading firmware with pm.mutex locked
  drm/amdgpu: remove mclk_lock
  drm/amdgpu: fix description of vm_size module parameter (v2)
  drm/amdgpu: remove all sh mem register modification in vm flush
  drm/amdgpu: rename GEM_OP_SET_INITIAL_DOMAIN -> GEM_OP_SET_PLACEMENT
  drm/amdgpu: fence should be added to shared slot
  drm/amdgpu: sync fence of clear_invalids (v2)
  drm/amdgpu: max_pde_used usage should be under protect
  drm/amdgpu: fix bug of vm_bo_map (v2)
  drm/amdgpu: implement the allocation range (v3)
  drm/amdgpu: rename amdgpu_ip_funcs to amd_ip_funcs (v2)
  ...
2015-06-05 11:14:18 +10:00
Frediano Ziglio
ef13169610 drm/qxl: Propagate correctly errors from qxlhw_handle_to_bo
This function could return a NULL pointer in case of handle not
present and in case of out of memory conditions however caller
function always returned EINVAL error hiding a possible ENOMEM.
This patch change the function to return the error instead to
be able to propagate the error instead of assuming EINVAL.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-06-05 11:00:52 +10:00
Frediano Ziglio
74d9a6335d drm/qxl: Simplify cleaning qxl processing command
In qxlhw_handle_to_bo we incremented counters twice, one time for release object
and one for reloc_info.
In the main function however reloc_info references was drop much earlier than
release so keeping the pointer only on release is safe and make cleaning
process easier.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-06-05 11:00:52 +10:00
Frediano Ziglio
e07154e28c drm/qxl: Move main reference counter to GEM object instead of TTM ones
qxl_bo structure has two reference counters, one in the GEM object and
another in the TTM object. The GEM object keep a counter to the TTM object
so when GEM counter reached zero the TTM counter (using qxl_bo_unref) was
decremented. The qxl object is fully freed (both GEM and TTM part are cleaned)
when the TTM counter reach zero.
One issue was that surface idr structure has no owning on qxl_bo objects however
it contains a pointer to qxl_bo object. This caused some nasty race condition
for instance qxl_bo object was reaped even after counter was already zero.
This patch fix these races moving main counter (the one used by qxl_bo_(un)ref)
to GEM object which cleanup routine (qxl_gem_object_free) remove the idr pointer
(using qxl_surface_evict) when the counters are still valid.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-06-05 11:00:51 +10:00
Frediano Ziglio
72ec5650a8 drm/qxl: Remove format string errors
Enable format string checks for qxl_io_log and remove resulting warnings
which could lead to memory errors on different platform or just printing
wrong information.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-06-05 11:00:51 +10:00
Frediano Ziglio
de0b523a5a drm/qxl: Handle correctly failures in qxl_alloc_relase_reserved
Free resources correctly if function fails

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-06-05 11:00:50 +10:00
Frediano Ziglio
6ecf5c2b57 drm/qxl: Fix return for qxl_release_alloc
This function return handle to allocated release object which is an int.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-06-05 11:00:50 +10:00
Frediano Ziglio
c610c7137c drm/qxl: Handle all errors in qxl_surface_evict
Only EBUSY error was handled. This could cause code to believe
reserve was successful while it failed.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-06-05 11:00:49 +10:00
Frediano Ziglio
fe2af53bae drm/qxl: Avoid double free on error
Is we are not able to get source bo object from handle we free
destination bo object and call cleanup code however destination
object was already inserted in reloc_info array (num_relocs was
already incremented) so on cleanup we free destination again.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-06-05 11:00:49 +10:00
Frediano Ziglio
55cc3df08a drm/qxl: Fix print statement not using uninitialized variable
reloc_info[i] is not still initialized in the print statement.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-06-05 11:00:47 +10:00
Frediano Ziglio
8451cc964c drm/qxl: Do not leak memory if qxl_release_list_add fails
If the function fails reference counter to the object is not decremented
causing leaks.
This is hard to spot as it happens only on very low memory situations.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-06-05 11:00:37 +10:00
Frediano Ziglio
2fa19535ca drm/qxl: Do not cause spice-server to clean our objects
If objects are moved back from system memory to VRAM (and spice id
created again) memory is already initialized so we need to set flag
to not clear memory.
If you don't do it after a while using desktop many images turns to
black or transparents.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-06-05 11:00:27 +10:00
Haggai Abramonvsky
4aa17b2879 mlx5: Enable mutual support for IB and Ethernet
Ethernet functionality is only available when working in ISSI > 0 mode.

Previously, the IB driver wasn't ready to work on that mode, and hence
building both the IB driver and the Ethernet functionality in the core
driver were disallowed by Kconfigs.

Now, once we have all the pre-steps in place, we can remove this limitation.

The last steps in the IB driver for getting that setup to work are:
create dummy SRQ for the driver's use (until now we could use XRC_SRQ
as SRQ and XRC_SRQ, after moving to ISSI > 0, we separate XRC SRQs from
basic SRQs) and adapt the create QP function to be compatible with ISSI > 0.

Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04 16:41:02 -07:00
Majd Dibbiny
647241ea10 IB/mlx5: Don't create IB instance over Ethernet ports
Since we still don't have RoCE support in mlx5, avoid
creating IB driver instance over Ethernet ports.

Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04 16:41:02 -07:00
Majd Dibbiny
1b5daf11b0 IB/mlx5: Avoid using the MAD_IFC command under ISSI > 0 mode
In ISSI > 0 mode, most of the MAD_IFC command features are deprecated, and can't
be used. Therefore, when in that mode, we replace all of them with other commands
that provide the required functionality.

Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04 16:41:02 -07:00
Majd Dibbiny
a124d13ef5 net/mlx5_core: Add more query port helpers
Add the following helpers:

1. mlx5_query_port_proto_oper -- queries the port speed port mask
2. mlx5_query_port_link_width_oper - queries the port link with bitmask
3. mlx5_query_port_vl_hw_cap - queries the Virtual Lanes supported on this port

These helpers will be used from the IB driver when working in ISSI > 0 mode.

Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04 16:41:02 -07:00
Majd Dibbiny
a05bdefa40 net/mlx5_core: Use port number when querying port ptys
Until now, mlx5_query_port_ptys always queried port number one.

Added new argument in the function's prototype so we can also query
the second port. This will be needed  when thr helper will be invoked
from the IB driver on non FPP (Function-Per-Port) devices.

Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04 16:41:01 -07:00
Majd Dibbiny
e760152d08 net/mlx5_core: Use port number in the query port mtu helpers
Extend the function prototypes for max and operational mtu to take the
local port number. In the Ethernet driver is this hard coded to one,
since ConnectX4 Ethernet devices are always function-per-port.
The IB driver also serves older devices (ConnectIB) which isn't such,
and hence the part can vary.

Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04 16:41:01 -07:00
Majd Dibbiny
211e6c80e5 net/mlx5_core: Get vendor-id using the query adapter command
Add two wrapper functions to the query adapter command:

1. mlx5_query_board_id -- replaces the old mlx5_cmd_query_adapter.

2. mlx5_core_query_vendor_id -- retrieves the vendor_id from the
   query_adapter command.

Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04 16:41:01 -07:00
Majd Dibbiny
707c4602cd net/mlx5_core: Add new query HCA vport commands
Added the implementation for the following commands:

1. QUERY_HCA_VPORT_GID
2. QUERY_HCA_VPORT_PKEY
3. QUERY_HCA_VPORT_CONTEXT

They will be needed when we move to work with ISSI > 0 in the IB driver too.

Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04 16:41:01 -07:00
Majd Dibbiny
d18a9470f8 net/mlx5_core: Make the vport helpers available for the IB driver too
Move the vport header file to be under include/linux/mlx5, such that
the mlx5 IB can use it as well.

Also add nic_ prefix to the vport NIC commands to differeniate between
HCA vport commands and NIC vport commands.

Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04 16:41:01 -07:00
Haggai Abramonvsky
e74a1db033 net/mlx5_core: Check the return bitmask when querying ISSI
The determination of the supported ISSI versions should be conditioned
on the returned mask, and not only on the return status of the query
ISSI command, fix that.

Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04 16:41:01 -07:00
Haggai Abramonvsky
01949d0109 net/mlx5_core: Enable XRCs and SRQs when using ISSI > 0
When working in ISSI > 0 mode, the model exposed by the device for
XRCs and SRQs is different. XRCs use XRC SRQs and plain SRQs are based
on RPM (Receive Memory Pool).

Add helper functions to create, modify, query, and arm XRC SRQs and RMPs.

Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04 16:41:01 -07:00
Haggai Abramonvsky
7db22ffb5b net/mlx5_core: Apply proper name convention to helpers
Some core helper functions were named with mlx5_ only prefix, fix that to
mlx5_core_ so we're aligned with the overall scheme used for core services.

Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04 16:41:00 -07:00
Amir Vadai
5e24851ec5 net/mlx5_en: Add missing check for memory allocation failure
The patch afb736e933: "net/mlx5: Ethernet resource handling files"
from May 28, 2015, leads to the following static checker warning:

drivers/net/ethernet/mellanox/mlx5/core/en_flow_table.c:726 mlx5e_create_main_flow_table()
error: potential null dereference 'g'.  (kcalloc returns null)

Fixes: afb736e933 ("net/mlx5: Ethernet resource handling files")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04 16:41:00 -07:00
Tom Herbert
c3f8324188 net: Add full IPv6 addresses to flow_keys
This patch adds full IPv6 addresses into flow_keys and uses them as
input to the flow hash function. The implementation supports either
IPv4 or IPv6 addresses in a union, and selector is used to determine
how may words to input to jhash2.

We also add flow_get_u32_dst and flow_get_u32_src functions which are
used to get a u32 representation of the source and destination
addresses. For IPv6, ipv6_addr_hash is called. These functions retain
getting the legacy values of src and dst in flow_keys.

With this patch, Ethertype and IP protocol are now included in the
flow hash input.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04 15:44:30 -07:00
Shailendra Verma
ffaa31d794 atm:he - Do not initialise statics to 0.
According to <stdbool.h> false is always '0' and
Static variables are initialised to 0 by GCC.

Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04 15:43:10 -07:00
Uwe Kleine-König
4a1caed3d0 clk: make several parent names const
Since commit 2893c37946 ("clk: make strings in parent name arrays
const") the name of parent clocks can be const. So add more const in
several clock drivers.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-04 14:27:06 -07:00