Commit graph

287,481 commits

Author SHA1 Message Date
Hiep Cao Minh
cc2e9328ed spi: rspi: Re-do the returning value of qspi_transfer_out_in
To reduce complexity of code, drop "ret" then qspi_transfer_out_in function
should return the value of "qspi_trigger_transfer_out_in" directly.

Signed-off-by: Hiep Cao Minh <cm-hiep@jinso.co.jp>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02 14:58:58 +01:00
Hiep Cao Minh
a91bbe7d3f spi: rspi: modify the name of "qspi_trigger_transfer_out_int" function
The name of "qspi_trigger_transfer_out_int" function should be
"qspi_trigger_transfer_out_in" without "t".

Signed-off-by: Hiep Cao Minh <cm-hiep@jinso.co.jp>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02 14:58:52 +01:00
Chris Lesiak
0315253b19 hwmon: (ntc_thermistor) fix iio raw to microvolts conversion
The function ntc_adc_iio_read was assuming both a 12 bit ADC and that
pullup_uv is the same as the ADC reference voltage.  If either
assumption is false, then the result is incorrect.

Attempt to use iio_convert_raw_to_processed to convert the raw value to
microvolts.  It will fail for iio channels that don't support support
IIO_CHAN_INFO_SCALE; in that case fall back to the assumptions.

Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-06-02 06:53:50 -07:00
Gregory Fong
3b0213d56e gpio: Add GPIO support for Broadcom STB SoCs
This adds support for the GPIO IP "UPG GIO" used on
Broadcom STB SoCs (BCM7XXX and some others). Uses
basic_mmio_gpio to instantiate a gpio_chip for each bank.
The driver assumes that it handles the base set of GPIOs
on the system and that it can start its numbering sequence
from 0, so any GPIO expanders used with it must dynamically
assign GPIO numbers after this driver has finished
registering its GPIOs.

Does not implement the interrupt-controller portion yet,
will be done in a future commit.

v2:
- change include to use <linux/gpio/driver.h> instead of
  <linux/gpio.h>
- get rid of unnecessary imask member in struct bank
- rename GPIO_PER_BANK -> MAX_GPIO_PER_BANK
- always have 32 GPIOs per bank and add 'width' member in
  struct bank to hold actual number of GPIOs in use
- mark of_match table as const

List-usage-fixed-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-02 15:36:22 +02:00
Rameshwar Prasad Sahu
6d0767c10f dmaengine: xgene-dma: Fix "incorrect type in assignement" warnings
This patch fixes sparse warnings like incorrect type in assignment
(different base types), cast to restricted __le64.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-02 19:04:10 +05:30
Doug Ledford
b806ef3bbe Merge branch 'for-4.2-misc' into k.o/for-4.2 2015-06-02 09:33:22 -04:00
Ira Weiny
73cdaaeed1 IB/core cleanup: Add const to args - agent_send_response
In order to support constant callers of agent_send_response we add const
specifiers to the its pointer arguments.

Adjust the call tree accordingly.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-02 09:33:13 -04:00
Ira Weiny
a97e2d86a9 IB/core cleanup: Add const on args - device->process_mad
The process_mad device function declares some parameters as "in".  Make those
parameters const and adjust the call tree under process_mad in the various
drivers accordingly.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-02 09:33:13 -04:00
Stefan Agner
19d643d68b dmaengine: fix kernel-doc documentation
Fix function names in kernel-doc function comments.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-02 18:53:35 +05:30
Roland Dreier
1156256811 IB/mlx4: Fix error paths in mlx4_ib_create_flow()
The unwinding clean up code are err_create_flow starts at the current
index i.  That means we shouldn't increment i until we're really sure
we won't have to destroy the current flow; otherwise we might
increment the index, fail inside an is_bonded block, and end up
accessing off the end of the reg_id[] array.

This was detected by Coverity (CID 1271229).

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-02 09:22:31 -04:00
Roland Dreier
18eaf1f195 RDMA/ocrdma: Fix memory leak in _ocrdma_alloc_pd()
If ocrdma_get_pd_num() fails, then we need to free the pd struct we allocated.

This was detected by Coverity (CID 1271245).

Signed-off-by: Roland Dreier <roland@purestorage.com>
Acked-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-02 09:22:31 -04:00
Bart Van Assche
5237496781 IB/ipoib: Fix RCU annotations in ipoib_neigh_hash_init()
Avoid that sparse complains about ipoib_neigh_hash_init(). This
patch does not change any functionality. See also patch "IPoIB:
Fix memory leak in the neigh table deletion flow" (commit ID
66172c0993).

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-02 09:22:31 -04:00
Faisal Latif
854ace98e7 RDMA/nes: Enable the use of the tos field in the nes driver
RDMA/nes: Enable the use of the tos field in the nes driver

Signed-off-by: Faisal Latif <Faisal.Latif@intel.com>
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-02 09:22:31 -04:00
Steve Wise
68cdba068d RDMA/iw_cm: Export tos field to iwarp providers
rdma-cma/iw_cm: Export tos field to iwarp providers

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-02 09:22:30 -04:00
Peter Ujfalusi
429770823d dmaengine: hsu: Fix memory leak when stopping a running transfer
The vd->node is removed from the lists when the transfer started so the
vchan_get_all_descriptors() will not find it. This results memory leak.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[andy: fix the typo to prevent a compilation error]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-02 18:33:08 +05:30
Y Vo
733cf014f0 gpio: xgene: add ACPI support for APM X-Gene GPIO standby driver
Add ACPI support for APM X-Gene GPIO standby driver.

Signed-off-by: Y Vo <yvo@apm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-02 14:52:00 +02:00
Masahiro Yamada
7e9236ff3d pinctrl: fix confusing debug message in pinctrl_register_map()
There are two types for pinctrl maps: pinmux and pinconfig
This debug message shows the number of maps of both types.
The string "pinmux map" is not precise.  Let's say "pinctrl map"
instead.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[also fixed %d -> %u]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-02 13:32:20 +02:00
Masahiro Yamada
4fd24e220e pinctrl: zynq: add static const to zynq_pctrl_groups
This array is only referenced in this file and never updated.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-02 13:30:33 +02:00
Masahiro Yamada
c0b8555c15 pinctrl: zynq: add static to zynq_pins
This array is only referenced in this file.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-02 13:29:35 +02:00
Takashi Iwai
53cd255ce7 UBI: Use static class and attribute groups
This patch cleans up the manual device_create_file() or
class_create_file() calls by replacing with static attribute groups.
It simplifies the code and also avoids the possible races between the
device/class registration and sysfs creations.

For the simplification, also make ubi_class a static instance with
initializers, too.

Amend a bit by Hujianyang.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: hujianyang <hujianyang@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02 13:16:25 +02:00
S Twiss
050d0f2de1 regulator: da9062: Remove unused variable build warning
Remove the unused variable build warning for reg_matches that appears
during the compilation of the DA9062 regulator driver.

da9062-regulator.c: In function da9062_regulator_probe:
da9062-regulator.c:727:29: warning: unused variable reg_matches

Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02 12:11:17 +01:00
Fabio Estevam
29454738f9 regulator: wm831x: Pass the IRQF_ONESHOT flag
Since commit 1c6c69525b ("genirq: Reject bogus threaded irq requests")
threaded IRQs without a primary handler need to be requested with
IRQF_ONESHOT, otherwise the request will fail.

So pass the IRQF_ONESHOT flag in this case.

The semantic patch that makes this change is available
in scripts/coccinelle/misc/irqf_oneshot.cocci.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02 11:53:59 +01:00
Maxime Coquelin
d4688bdc63 clockevents/drivers/timer-stm32: Fix build warning spotted by kbuild test robot
This patch fixes below warning spotted by kbuild test robot when building
with ARCH=powerpc:

   drivers/clocksource/timer-stm32.c: In function 'stm32_clockevent_init':
>> drivers/clocksource/timer-stm32.c:140:9: warning: large integer implicitly
	truncated to unsigned type [-Woverflow]

     writel_relaxed(~0UL, data->base + TIM_ARR);

The fix consists in using 0U instead of 0UL.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-02 12:10:16 +02:00
Maxime Coquelin
e37e45934a clockevents/drivers: Add STM32 Timer driver
STM32 MCUs feature 16 and 32 bits general purpose timers with prescalers.
The drivers detects whether the time is 16 or 32 bits, and applies a
1024 prescaler value if it is 16 bits.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-02 12:10:15 +02:00
Maxime Coquelin
4958ebb3d0 clocksource/drivers/armv7m_systick: Add ARM System timer driver
This patch adds clocksource support for ARMv7-M's System timer,
also known as SysTick.

Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-02 12:10:14 +02:00
Joachim Eastwood
050dd3222b clocksource/drivers/lpc32xx: Add the lpc32xx timer driver
Add support for using the NXP LPC timer as clocksource and clock
event. These timers are present on many NXP devices including
LPC32xx, LPC17xx, LPC18xx and LPC43xx.

The timer has a 32-bit timer counter register with a programmable
32-bit prescaler. It supports up to 4 compare match values with
interrupt generation and reset/stop timer counter action.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-06-02 12:10:10 +02:00
Krzysztof Kozlowski
65ec7b2718 clocksource/drivers/exynos_mct: Remove old platform mct_init()
Since commit 228e3023eb ("Merge tag 'mct-exynos-for-v3.10' of ...") the
mct_init() was superseded by mct_init_dt() and is not referenced
anywhere. Remove it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-02 12:10:09 +02:00
Krzysztof Kozlowski
6c10bf6372 clocksource/drivers/exynos_mct: Staticize struct clocksource
The struct clocksource 'mct_frc' is not exported and used outside so
make it static.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-02 12:10:09 +02:00
Krzysztof Kozlowski
37285674f3 clocksource/drivers/exynos_mct: Change exynos4_mct_tick_clear return type to void
Return value of exynos4_mct_tick_clear() was never checked so it can
be safely changed to void.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-02 12:10:08 +02:00
Stephen Boyd
4ba15d1d41 clocksource/drivers/qcom: Remove dead code
This code is no longer used now that mach-msm has been removed.
Delete it.

Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-02 12:10:08 +02:00
shengyong
2848594a20 UBI: add a helper function for updatting on-flash layout volumes
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02 11:47:51 +02:00
shengyong
e96a8a3bb6 UBI: Fastmap: Do not add vol if it already exists
During fastmap attaching, check if a volume already exists when adding
the volume to volume tree. NOTE that the issue cannot happen, only if
the on-flash fastmap data is modified.

Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02 11:46:14 +02:00
shengyong
e8d266cf8d UBI: Init vol->reserved_pebs by assignment
`vol' is a newly allocated value by kzalloc. Initialize it by assignment
instead of `+='.

Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02 11:44:43 +02:00
shengyong
f6e951af34 UBI: Fastmap: Rename variables to make them meaningful
s/fmpl1/fmpl
s/fmpl2/fmpl_wl

Add "WL" to the error message when wrong WL pool magic number is detected.

Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02 11:44:20 +02:00
shengyong
a18fd67267 UBI: Fastmap: Remove unnecessary `\'
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02 11:43:52 +02:00
shengyong
212240dfd2 UBI: Fastmap: Use max() to get the larger value
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02 11:43:33 +02:00
Dan Ehrenberg
2bf50d42f3 UBI: block: Dynamically allocate minor numbers
This patch makes ubiblock devices have minor numbers beginning from
0, allocated dynamically independently of the ubi device/volume
number. This property becomes useful because, on 32-bit architectures
with LFS turned off in a userspace program, device minor numbers
over 8 bits cause stat to return -EOVERFLOW. If the device number is
high (>1) due to multiple MTD partitions, such an overflow will occur.
While enabling LFS is clearly a nicer solution, it's often difficult
to turn on in practice globally as many widely distributed packages
don't work with LFS on.

Other storage systems have their own workarounds, with SCSI making
multiple device majors and MMC having a config option for the number
of partitions per device. A completely dynamic minor numbering is
simpler than these. It is unlikely that anyone is depending on a
static minor number since the major is dynamic anyway. In addition,
ubiblock is still relatively new, so now is the time to make such
changes.

Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02 11:35:49 +02:00
Tero Kristo
989feafb84 clk: ti: move low-level access and init code under clock driver
With most of the clock code under clock driver already, the low-level
register access code, and the init code for the same, is no longer
needed outside the clock driver. Thus, these can be moved under clock
driver also.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:46 +03:00
Tero Kristo
e9e63088e4 clk: ti: remove exported ll_ops struct, instead add an API for registration
We should avoid exporting data from drivers, instead use an API for
registering the clock low level operations.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:46 +03:00
Tero Kristo
a3314e9cf6 clk: ti: move some public definitions to private header
Several exported TI clock driver features are no longer needed outside
the clock driver itself, thus move all of these to the driver private
header file. Also, update some of the driver files to actually include
this header.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:45 +03:00
Tero Kristo
c9a58b0a84 clk: ti: am3517: move remaining am3517 clock support code to clock driver
With legacy clock support gone, this is no longer needed under platform,
so move it under the clock driver itself. Make some exports be driver
internal definitions at the same time.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:45 +03:00
Tero Kristo
f2671d5c6c clk: ti: omap34xx: move omap34xx clock type support code to clock driver
With the legacy clock data gone, this is no longer needed under platform,
so move it under the clock driver itself. Remove unnecessary declarations
from the TI clock header also.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:37 +03:00
Tero Kristo
bd86cfdcbd clk: ti: clkdm: move clkdm gate clock support code to clock driver
With the legacy clock data gone, this is no longer needed under platform,
so move it under the clock driver itself. Remove the exported clock driver
APIs as well, as these are not needed outside clock driver anymore.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:30 +03:00
Tero Kristo
d5a04dddf5 clk: ti: omap2430: move clock support code under clock driver
With the legacy clock support gone, this is no longer needed under
platform code-base. Thus, move this under the TI clock driver, and
remove the exported API from the public header.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:29 +03:00
Tero Kristo
9f37e90efa clk: ti: dflt: move support for default gate clock to clock driver
With the legacy support gone, OMAP2+ default gate clock can be moved
under clock driver. Create a new file for the purpose, and clean-up
the header exports a bit as some clock APIs are no longer needed
outside clock driver itself.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:22 +03:00
Tero Kristo
0565fb168d clk: ti: dpll: move omap3 DPLL functionality to clock driver
With the legacy clock support gone, OMAP3 generic DPLL code can now be
moved over to the clock driver also. A few un-unused clkoutx2 functions
are also removed at the same time.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:14 +03:00
Tero Kristo
a5aa8a603e clk: ti: move omap2_clk_enable_init_clocks under clock driver
This is no longer used outside clock driver, so move it under the driver
and remove the export for it from the global header file.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:13 +03:00
Tero Kristo
bf22bae794 clk: ti: autoidle: move generic autoidle handling code to clock driver
This is no longer needed in platform directory, as the legacy clock data
is gone, so move it under TI clock driver. Some static functions are
renamed also.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:13 +03:00
Tero Kristo
ef14db0977 clk: ti: move interface clock implementation under drivers/clk
With the legacy clock support gone, the OMAP interface clock implementation
can be moved under the clock driver. Some temporary header file tweaks are
also needed to make this change work properly.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:30:59 +03:00
Tero Kristo
59245ce01a clk: ti: move OMAP4+ DPLL implementation under drivers/clk
With the legacy clock support gone, the OMAP4 specific DPLL implementations
can be moved under the clock driver. Change some of the function prototypes
to be static at the same time, and remove some exports from the global TI
clock driver header.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:30:58 +03:00