Commit graph

287,481 commits

Author SHA1 Message Date
Antonio Ospite
6e01d531c9 HID: Makefile: fix alignment of objs-* entries
Most of the entries are aligned with TABs, fix those which are not.

Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-26 15:32:38 +02:00
Geert Uytterhoeven
79ce48df75 lpfc: Grammar s/an negative/a negative/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-By: James Smart <james.smart@avagotech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-26 15:30:14 +02:00
Antonio Ospite
947b6f87c7 cx25821: cx25821-medusa-reg.h: fix 0x0x prefix
Fix the 0x0x prefix in integer constants.

In this case a padding 0 must also be inserted to make the constants
look like all the other 16 bits ones.

Signed-off-by: Antonio Ospite <ao2@ao2.it>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-26 15:27:50 +02:00
Masanari Iida
7667928601 rapidio: Fix kerneldoc and comment
This patch fix spelling typos found in DocBook/rapidio.xml
Ths file was generated from comments in the source files,
I had to fix them, instead of the xml file.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-26 15:23:23 +02:00
Masanari Iida
8c51931957 qla4xxx: Fix printk() in qla4_83xx_read_reset_template() and qla4_83xx_pre_loopback_config()
This patch fix spelling typo in printk within drivers/qla4xxx.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Nilesh Javali <nilesh.javali@qlogic.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-26 15:22:17 +02:00
Johannes Berg
80279fb7ba cfg80211: properly send NL80211_ATTR_DISCONNECTED_BY_AP in disconnect
When we disconnect from the AP, drivers call cfg80211_disconnect().
This doesn't know whether the disconnection was initiated locally
or by the AP though, which can cause problems with the supplicant,
for example with WPS. This issue obviously doesn't show up with any
mac80211 based driver since mac80211 doesn't call this function.

Fix this by requiring drivers to indicate whether the disconnect is
locally generated or not. I've tried to update the drivers, but may
not have gotten the values correct, and some drivers may currently
not be able to report correct values. In case of doubt I left it at
false, which is the current behaviour.

For libertas, make adjustments as indicated by Dan Williams.

Reported-by: Matthieu Mauger <matthieux.mauger@intel.com>
Tested-by: Matthieu Mauger <matthieux.mauger@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-26 15:21:27 +02:00
Masanari Iida
769a12a9c7 treewide: Kconfig: fix wording / spelling
This patch fix spelling typos in Kconfig.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-26 15:17:35 +02:00
Paul Gortmaker
2d9b480b15 usb/serial: fix grammar in Kconfig help text for FTDI_SIO
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-26 15:14:55 +02:00
Geert Uytterhoeven
4b63b2861e megaraid_sas: fix kerneldoc
Fix typo in kerneldoc identifier.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sumit Saxena <sumit.saxena@lsi.com>
Cc: James E.J. Bottomley <JBottomley@parallels.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-26 15:12:33 +02:00
Geert Uytterhoeven
e09b50ad7a drm/radeon: fix comment
Fix spelling typo in comment.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-26 15:09:03 +02:00
Geert Uytterhoeven
3c7f3092d0 isdn: fix grammar in comment
Fix grammar / typo in comment.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-26 15:08:12 +02:00
Daniel Vetter
bbe16a40e2 drm: check for garbage in unused addfb2 fields
Unfortunately old userspace didn't clear this properly, but since
we've added fb modifiers that's fixed. Checking properly that unused
fields is important for abi extensions, and just right now there's a
bunch of discussions going on about how exactly the additional aux
planes for render compression should be specified.

So let's first make sure that the values in those additional fields
can be indeed used.

Cc: Thierry Reding <thierry.reding@gmail.com>
Testcase: igt/kms_addfb/unused-*
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-05-26 14:43:29 +02:00
Franky Lin
f3550aeb7f brcmfmac: add support for dma indices feature
PCIe full dongle firmware can support a dma indices feature with which
firmware can update/fetch the read/write indices of message buffer
rings on both host to dongle and dongle to host directions. The support is
announced by firmware through shared flags.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 14:09:59 +03:00
Franky Lin
c2d4182edc brcmfmac: remove dummy cache flush/invalidate function
brcmf_dma_flush and brcmf_dma_invalidate_cache are not necessary and
have never been implemented.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 14:09:57 +03:00
Franky Lin
fd5e8cb817 brcmfmac: remove pci shared structure rev4 support
All pcie full dongle chips supported by fmac are using rev 5+ shared
structure. This patch removes the rev4 related code.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 14:09:55 +03:00
Hante Meuleman
464a5f3f04 brcmfmac: Improve throughput by scheduling msbug flow worker.
The tx flow worker in msgbuf gets scheduled at tx till a certain
threshold has been reached. Then the tx completes will take over
the scheduling. When amsdu and ampdu is used the frames are
transferred wireless in a very bulky fashion, in combination
with this scheduling algorithm and buffer limiters in the stack
this can result in limited throughput. This change causes the
flow worker to be scheduled more frequently from tx.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 14:09:54 +03:00
Arend van Spriel
f58001fa95 brcmfmac: allow device tree node without 'interrupts' property
As described in the device tree bindings for 'brcm,bcm4329-fmac'
nodes, the interrupts property is optional. So adding a check
for the presence of this property before attempting to parse
and map the interrupt. If not present or parsing fails return
and fallback to in-band sdio interrupt.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 14:09:53 +03:00
Avinash Patil
ec21dc4a00 mwifiex: reduce severity of debug messages for mgmt rx
This would ensure dmesg logs are not spammed with "unknown mgmt frame
subtype" messages.

Reviewed-by: James Cameron <quozl@laptop.org>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 14:08:00 +03:00
Kevin Lo
7b457dd0d6 rtlwifi: fix typos in Kconfig
This patch fixes typos in drivers/net/wirless/rtlwifi/Kconfig.

Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 14:04:56 +03:00
Oleksij Rempel
f911085ffa ath9k: split ar5008_hw_spur_mitigate and reuse common code in ar9002_hw_spur_mitigate.
[ar5008 and ar9002]_hw_spur_mitigate have big portion of identical code.
This patch will move common part of ar5008_hw_spur_mitigate to
ar5008_hw_cmn_spur_mitigate and reuse it in ar9002_hw_spur_mitigate.

As noticed by Joe Perches I reuse ar9002_hw_spur_mitigate (const) version of
declarations for pilot_mask_reg and chan_mask_reg.

There should be no other difference with original code.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 14:02:45 +03:00
Vincent Fann
1277fa2ab2 rtlwifi: Remove the clear interrupt routine from all drivers
Several of these drivers have there TX randomly blocked for 3~5 seconds while
measuring tx throughput (iperf). The root couse happens in rtl_pci_flush().
The function uses a while-loop to wait for TX queue length to decrease to 0.
The TX queue length counts the number of packets that are queued in the driver.
The driver relys on the TX OK interrupt to return skb and reduce TX queue length.

The interrupt subroutine disables interupts, reads the interrupt registers, and
then clears the registers in the beginning of _rtl_pci_interrupt(). After all
interupts process are finished, the driver invokes enable_interrupt() to enable
interupts. This behavior is normal for an interrupt subroutine.

But enable_interrupt() invokes clear_interrupt() again. This unexpected interrupt
clearing may cleari me fresh TX OK interrupts. These missing interrupts cause TX
queue length to never reduce to 0i, which causes rtl_pci_flush() to be stuck in
unterminated while-loop.

This patch removes clear_interrupt() in enable_interrupt() to avoid this behavior.

Signed-off-by: Vincent Fann <vincent_fann@realtek.com>
Signed-off-by: Shao Fu <shaofu@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [3.18+]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:58:47 +03:00
Shao Fu
d10101a603 rtlwifi: rtl8821ae: Fix problem with regulatory information
The driver was not setting a channel plan. Now it gets it from EEPROM.

Signed-off-by: Shao Fu <shaofu@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:56:37 +03:00
Shao Fu
b23cd22d39 rtlwifi: rtl8723be: Update driver for regulatory changes
The driver is converted to use the channel plan in the EEPROM.

Signed-off-by: Shao Fu <shaofu@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:56:36 +03:00
Shao Fu
5620302484 rtlwifi: rtl8192ee: Apply the regulatory changes to driver
The driver was setting a channel plan for the world. Now it reads it fromi
EEPROM.

In addition, a typo was fixed.

Signed-off-by: Shao Fu <shaofu@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:56:34 +03:00
Shao Fu
852ce78056 rtlwifi: rtl8188ee: Apply the new regulatory information
The driver was setting a channel plan for the world. Now it reads it from
EEPROM.

Signed-off-by: Shao Fu <shaofu@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:56:33 +03:00
Shao Fu
02b5fffbe9 rtlwifi: Update regulatory database
Driver rtlwifi maintains its own regulatory information, The Chrome Autotest
(https://www.chromium.org/chromium-os/testing/autotest-user-doc)
showed some errors. This patch adds the necessary information for rtlwifi.

Signed-off-by: Shao Fu <shaofu@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:56:31 +03:00
Dan Carpenter
e3958e9d60 rndis_wlan: harmless issue calling set_bit()
These are used like:

	set_bit(WORK_LINK_UP, &priv->work_pending);

The problem is that set_bit() takes the actual bit number and not a mask
so static checkers get upset.  It doesn't affect run time because we do
it consistently, but we may as well clean it up.

Fixes: 6010ce07a6 ('rndis_wlan: do link-down state change in worker thread')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:55:04 +03:00
Dan Carpenter
191f1aeeb9 ath9k_htc: memory corruption calling set_bit()
In d8a2c51cdc ('ath9k_htc: Use atomic operations for op_flags') we
changed things like this:

-	if (priv->op_flags & OP_TSF_RESET) {
+	if (test_bit(OP_TSF_RESET, &priv->op_flags)) {

The problem is that test_bit() takes a bit number and not a mask.  It
means that when we do:

	set_bit(OP_TSF_RESET, &priv->op_flags);

Then it sets the (1 << 6) bit instead of the 6 bit so we are setting a
bit which is past the end of the unsigned long.

Fixes: d8a2c51cdc ('ath9k_htc: Use atomic operations for op_flags')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:54:23 +03:00
Arnd Bergmann
22f44150aa brcmfmac: avoid gcc-5.1 warning
gcc-5.0 gained a new warning in the fwsignal portion of the brcmfmac
driver:

drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c: In function 'brcmf_fws_txs_process':
drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1478:8: warning: 'skb' may be used uninitialized in this function [-Wmaybe-uninitialized]

This is a false positive, and marking the brcmf_fws_hanger_poppkt function
as 'static inline' makes the warning go away. I have checked the object
file output and while a little code gets moved around, the size of
the binary remains identical.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:53:48 +03:00
Nicholas Mc Guire
4b3e845a09 carl9170: match wait_for_completion_timeout return type
Return type of wait_for_completion_timeout is unsigned long not int.
An appropriately named unsigned long is added, and the assignments
as well as error checking fixed up.

API conformance testing for completions with coccinelle spatches are being
used to locate API usage inconsistencies:
./drivers/net/wireless/ath/carl9170/usb.c:675
	int return assigned to unsigned long

Patch was compile tested with x86_64_defconfig + CONFIG_ATH_CARDS=m,
CONFIG_CARL9170=m

Patch is against 4.1-rc3 (localversion-next is -next-20150512)

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:53:23 +03:00
Zhaoyang Liu
acebe8c10a mwifiex: change dbg print func to mwifiex_dbg
This patch changes all debug print functions from dev_dbg/dev_err/dev_info
to mwifiex specific debug functions.

Signed-off-by: Zhaoyang Liu <liuzy@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:50:42 +03:00
Zhaoyang Liu
868093a9df mwifiex: add dump data debug support
This patch is to add support for data hexdump debug feature.
It is controlled by level debug_mask in adapter structure.

Signed-off-by: Zhaoyang Liu <liuzy@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:50:35 +03:00
Zhaoyang Liu
c687a0077f mwifiex: add prints debug ctrl support
This patch adds support for debugging print control in mwifiex driver.

The debug level can be controlled via either by modules load parameter
debug_mask or by writing to debug_mask in debugfs file.

Signed-off-by: Zhaoyang Liu <liuzy@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:50:33 +03:00
Chin-ran Lo
c2c6c85fca mwifiex: add support for FW memory read/write operations
This patch adds support for FW memory read/write operations via debugfs.
This is useful during debugging FW issues.

Examples:

For reading FW memory location:
echo r 0x01ac > /sys/kernel/debug/mwifiex/mlan0/memrw
cat /sys/kernel/debug/mwifiex/mlan0/memrw

For writing FW memory location:
echo w 0x01ac 0x55aa > /sys/kernel/debug/mwifiex/mlan0/memrw

Signed-off-by: Chin-ran Lo <crlo@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:50:32 +03:00
Daniel Drake
111c61054d rtlwifi: btcoexist: Fix interference between rtl8723be and Bluetooth
During usage of the new Bluetooth driver for Realtek devices, it was found
that BT scans were inhibited for the RTL8723BE when wireless was active. The
exact cause of this interference is not known yet, but a satisfactory work
around has been found that does not seem to have any visible side effects.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Shao Fu <shaofu@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:48:16 +03:00
Okash Khawaja
fe0a483ecf adm8211: fixed the possible pci cache line sizes inside switch-case
The PCI cache line size value was being compared against decimal values
prefixed with 0x.

Fixed the literals to use the correct hex values.

This has not been tested due to lack of hardware. However, the value in
`cline` is PCI cache line size, which is the CPU's cache line size.
It is less likely for cache line sizes to be 22 or 50, and more likely for
them to be 16 or 32. Also, as far as I understand, cache line size is used for
things like aligning DMA requests with CPU cache line, which improve
performance but wouldn't break anything if the value doesn't match. In
this case, we will fall through to the default case which leaves `reg`
unchanged.

Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:47:36 +03:00
Okash Khawaja
f5c65f3891 adm8211: fix checkpatch errors for indentation and new line
This patch fixes these checkpatch.pl errors around a single switch-case
block:

ERROR: switch and case should be at the same indent
ERROR: trailing statements should be on next line

More specifically, the fix has been applied to the five occurances of
the errors listed below.

ERROR: switch and case should be at the same indent
#1100: FILE: adm8211.c:1100:
+               switch (cline) {
[...]
+                 default: reg |= (0x0 << 14);

ERROR: trailing statements should be on next line
#1101: FILE: adm8211.c:1101:
+               case  0x8: reg |= (0x1 << 14);

ERROR: trailing statements should be on next line
#1103: FILE: adm8211.c:1103:
+               case 0x16: reg |= (0x2 << 14);

ERROR: trailing statements should be on next line
#1105: FILE: adm8211.c:1105:
+               case 0x32: reg |= (0x3 << 14);

ERROR: trailing statements should be on next line
#1107: FILE: adm8211.c:1107:
+                 default: reg |= (0x0 << 14);

Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:47:28 +03:00
Fu, Zhonghui
f0992ace68 brcmfmac: prohibit ACPI power management for brcmfmac driver
ACPI will manage WiFi chip's power state during suspend/resume
process on some tablet platforms(such as ASUS T100TA). This is
not supported by brcmfmac driver now, and the context of WiFi
chip will be damaged after resume. This patch informs ACPI not
to manage WiFi chip's power state.

Signed-off-by: Zhonghui Fu <zhonghui.fu@linux.intel.com>
Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:44:16 +03:00
Taehee Yoo
bfe3d2bf6c rtlwifi: rtl8192cu: Remove rtl92c_init_beacon_max_error's parameter
parameter "infra_mode" of rtl92c_init_beacon_max_error() is not used.
so i remove this.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:43:18 +03:00
Taehee Yoo
dacc7e1939 rtlwifi: rtl8192cu: Remove setting REG_BCN_MAX_ERR code in _rtl92cu_set_media_status().
Initialization routine set REG_BCN_MAX_ERR to 0xFF.
also _rtl92cu_set_media_status set REG_BCN_MAX_ERR to same value.
so i remove this code.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:43:05 +03:00
Lauri Kenttä
a706b41b82 rtlwifi: rtl8188ee: Fix pwrseqcmd.h include path.
Signed-off-by: Lauri Kenttä <lauri.kentta@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26 13:41:18 +03:00
Qipan Li
5bcc3b0bbe spi: sirf: add the reset for USP-based SPI
USP-based SPI need a disable and enable, otherwise it doesn't work.
this patch adds it as HW initialization.

Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-26 11:39:16 +01:00
Qipan Li
3aa7b1d66f spi: sirf: remove the allocation of dummypage
this job has been done by spi core.

Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-26 11:38:46 +01:00
Gregory CLEMENT
ce2f6ea1cb spi: orion: Fix maximum baud rates for Armada 370/XP
The commit df59fa7f4b "spi: orion: support armada extended baud
rates" was too optimistic for the maximum baud rate that the Armada
SoCs can support. According to the hardware datasheet the maximum
frequency supported by the Armada 370 SoC is tclk/4. But for the
Armada XP, Armada 38x and Armada 39x SoCs the limitation is 50MHz and
for the Armada 375 it is tclk/15.

Currently the armada-370-spi compatible is only used by the Armada 370
and the Armada XP device tree. On Armada 370, tclk cannot be higher
than 200MHz. In order to be able to handle both SoCs, we can take the
minimum of 50MHz and tclk/4.

A proper solution is adding a compatible string for each SoC, but it
can't be done as a fix for compatibility reason (we can't modify
device tree that have been already released) and it will be part of a
separate patch.

Fixes: df59fa7f4b (spi: orion: support armada extended baud rates)
Reported-by: Kostya Porotchkin <kostap@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
2015-05-26 11:35:10 +01:00
Nicolas Ferre
68feaca0b1 backlight: pwm: Handle EPROBE_DEFER while requesting the PWM
When trying to request the PWM device with devm_pwm_get(), the EPROBE_DEFER
flag is not handled properly. It can lead to the PWM not being found.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-05-26 08:44:59 +01:00
Daniel Stone
da9b2a381a drm: Retain reference to blob properties in lookup
When we look up a blob property, make sure we retain a reference to the
blob for the lifetime.

v2: Use DRM_MODE_PROP_BLOB, not PROP_OBJECT + OBJECT_BLOB.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-26 08:36:52 +02:00
Dave Airlie
c6e7e4bb7f Merge branch 'drm/next/adv7511' of git://linuxtv.org/pinchartl/fbdev into drm-next
adv7511 fix.

* 'drm/next/adv7511' of git://linuxtv.org/pinchartl/fbdev:
  drm: adv7511: Fix crash in IRQ handler when no encoder is associated
2015-05-26 16:20:26 +10:00
Rob Clark
990ed27207 drm/vgem: drop DRIVER_PRIME (v2)
For actual sharing of buffers with other drivers (ie. actual hardware)
we'll need to pimp things out a bit better to deal w/ caching, multiple
memory domains, etc.  See thread:

  http://lists.freedesktop.org/archives/dri-devel/2015-May/083160.html

But for the llvmpipe use-case this isn't a problem.  Nor do we really
need prime/dri3 (dri2 is sufficient).  So until the other issues are
sorted lets remove DRIVER_PRIME.

v2: also drop the dead code

[airlied:
 Okay I'm convinced this API could have a lot of use cases
 that are really really bad, yes the upload use case is valid
 however that isn't the only use case enabled, and if we allow
 all the other use cases, people will start to (ab)use them,
 and then they'll be ABI and my life will get worse, so disable
 PRIME for now]

Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-05-26 16:17:06 +10:00
Hannes Reinecke
6571fb3f8b advansys: Update to version 3.5 and remove compilation warning
The driver has now been converted to DMA-API, so we should
increase the version number and remove the compilation
warning.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-25 23:01:34 -07:00
Hannes Reinecke
bc31ec4df5 advansys: Remove call to dma_cache_sync()
Only required if the dma buffer has been allocated via
dma_alloc_noncoherent(), which this one is not.
With that call removed we can now also compile on ARM.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-25 23:00:59 -07:00