Commit graph

287,481 commits

Author SHA1 Message Date
Mauro Carvalho Chehab
f9e2e0e8ba [media] dib3000mc: fix bad indenting
drivers/media/dvb-frontends/dib3000mc.c:149 dib3000mc_setup_pwm_state() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-01 06:07:13 -03:00
Mauro Carvalho Chehab
6962685384 [media] cx231xx: fix bad indenting
drivers/media/usb/cx231xx/cx231xx-avcore.c:1598 cx231xx_set_DIF_bandpass() warn: inconsistent indenting
drivers/media/usb/cx231xx/cx231xx-core.c:656 cx231xx_demod_reset() warn: inconsistent indenting
drivers/media/usb/cx231xx/cx231xx-core.c:659 cx231xx_demod_reset() warn: inconsistent indenting
drivers/media/usb/cx231xx/cx231xx-core.c:664 cx231xx_demod_reset() warn: inconsistent indenting
drivers/media/usb/cx231xx/cx231xx-core.c:669 cx231xx_demod_reset() warn: inconsistent indenting
drivers/media/usb/cx231xx/cx231xx-core.c:673 cx231xx_demod_reset() warn: inconsistent indenting
drivers/media/usb/cx231xx/cx231xx-417.c:1164 cx231xx_initialize_codec() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-01 06:06:49 -03:00
Mauro Carvalho Chehab
d487df9ef9 [media] ov7670: check read error also for REG_AECHH on ov7670_s_exp()
ov7670_s_exp() checks read error for 2 registers: REG_COM1
and REG_COM8. But, although it uses the value latter, it
doesn't check errors on REG_AECHH read. Yet, as it is doing
a bitmask operation there, the read operation should succeed.

So, fix the code to also check if this succeeded.

This fixes this smatch report:
	drivers/media/i2c/ov7670.c:1366 ov7670_s_exp() warn: inconsistent indenting

Compile-tested only.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-01 06:06:13 -03:00
Mauro Carvalho Chehab
5e6b681b12 [media] stv0297: change typecast to u64 to avoid smatch warnings
drivers/media/dvb-frontends/stv0297.c:140 stv0297_get_symbolrate() warn: should 'stv0297_readreg(state, 86) << 8' be a 64 bit type?
drivers/media/dvb-frontends/stv0297.c:141 stv0297_get_symbolrate() warn: should 'stv0297_readreg(state, 87) << 16' be a 64 bit type?
drivers/media/dvb-frontends/stv0297.c:142 stv0297_get_symbolrate() warn: should 'stv0297_readreg(state, 88) << 24' be a 64 bit type?

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-01 06:05:31 -03:00
Mauro Carvalho Chehab
2267d2d747 [media] zl10353: fix indenting
drivers/media/dvb-frontends/zl10353.c:536 zl10353_read_ucblocks() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-01 06:04:34 -03:00
Mauro Carvalho Chehab
57eedc316e [media] bttv: fix indenting
drivers/media/pci/bt8xx/bttv-driver.c:2679 bttv_s_fbuf() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-01 06:03:49 -03:00
Mauro Carvalho Chehab
2be20f74c0 [media] r820t: fix identing
drivers/media/tuners/r820t.c:945 r820t_sysfreq_sel() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-01 06:03:25 -03:00
Mauro Carvalho Chehab
2b257d18f0 [media] tda1004x: fix identation
drivers/media/dvb-frontends/tda1004x.c:653 tda10046_init() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-01 06:03:01 -03:00
Jeppe Ledet-Pedersen
5793affe8c net: can: xilinx_can: fix extended frame handling
Using IDR_SRR in RXFIFO_ID to test for the presence of data is only
valid for standard frames. For extended frames the bit is always 1 and
IDR_RTR should be used instead. This patch switches the check to use
CAN_RTR_FLAG which is correctly set when reading the ID.

The patch also changes the DW1/DW2 to be read unconditionally, since
this is necessary to remove the frame from the RXFIFO.

Signed-off-by: Jeppe Ledet-Pedersen <jlp@gomspace.com>
Acked-by: Kedareswara rao Appana <appanad@xilinx.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-05-01 10:11:46 +02:00
Joe Perches
ce1d94919d thermal: Use bool function return values of true/false not 1/0
Use the normal return values for bool functions

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-05-01 13:22:34 +08:00
Dasaratharaman Chandramouli
6a6bcf08e5 intel powerclamp: support Knights Landing
This patch enables intel_powerclamp driver to run on the
next-generation Intel(R) Xeon Phi Microarchitecture
code named "Knights Landing"

Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-05-01 11:39:04 +08:00
Brian Bian
383b4d60f6 int340x_thermal/processor_thermal_device: add support to Skylake processors
Add PCI ID of Skylake thermal reporting device.

Signed-off-by: Brian Bian <brian.bian@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-05-01 11:38:55 +08:00
Wu Fengguang
bd7081ae2b Thermal: Intel SoC: fix simple_return.cocci warnings
drivers/thermal/intel_soc_dts_iosf.c:358:4-7: WARNING: end returns can be simpified

 Simplify a trivial if-return sequence.  Possibly combine with a
 preceding function call.
Generated by: scripts/coccinelle/misc/simple_return.cocci

CC: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-05-01 11:38:27 +08:00
Ong, Boon Leong
8c18769396 thermal: intel Quark SoC X1000 DTS thermal driver
In Intel Quark SoC X1000, there is one on-die digital temperature sensor(DTS).
The DTS offers both hot & critical trip points.

However, in current distribution of UEFI BIOS for Quark platform, only
critical trip point is configured to be 105 degree Celsius (based on Quark
SW ver1.0.1 and hot trip point is not used due to lack of IRQ.

There is no active cooling device for Quark SoC, so Quark SoC thermal
management logic expects Linux distro to orderly power-off when temperature
of the DTS exceeds the configured critical trip point.

Kernel param "polling_delay" in milliseconds is used to control the frequency
the DTS temperature is read by thermal framework. It defaults to 2-second.
To change it, use kernel boot param "intel_quark_dts_thermal.polling_delay=X".

User interacts with Quark SoC DTS thermal driver through sysfs via:
/sys/class/thermal/thermal_zone0/

For example:
 - to read DTS temperature
   $ cat temp
 - to read critical trip point
   $ cat trip_point_0_temp
 - to read trip point type
   $ cat trip_point_0_type
 - to emulate temperature raise to test orderly shutdown by Linux distro
   $ echo 105 > emul_temp

Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Reviewed-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Reviewed-by: Kweh, Hock Leong <hock.leong.kweh@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-05-01 11:20:43 +08:00
Srinivas Pandruvada
4d0dd6c157 Thermal/int340x/processor_thermal: Enable auxiliary DTS for Braswell
Support two auxiliary DTS present on Braswell platform using side band
IOSF interface. This supports two read write trips, which can be used
to get notification on trip violation.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2015-05-01 11:20:42 +08:00
Srinivas Pandruvada
3a2419f865 Thermal: Intel SoC: DTS thermal use common APIs
There is no change in functionality but using the common IOSF core APIs.
This driver is now just responsible for enumeration and call relevant
API to create thermal zone and register critical trip.
Also cpuid 0x4c is now handled in the int340x processor thermal driver
with the same functionality.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2015-05-01 11:20:42 +08:00
Srinivas Pandruvada
ee073604db Thermal: Intel SoC: DTS thermal IOSF core
This is becoming a common feature for Intel SoCs to expose the additional
digital temperature sensors (DTSs) using side band interface (IOSF). This
change remove common IOSF DTS handler function from the existing driver
intel_soc_dts_thermal.c and creates a stand alone module, which can
be selected from the SoC specific drivers. In this way there is less
code duplication.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2015-05-01 11:20:42 +08:00
Iyappan Subramanian
9dd3c79749 drivers: net: xgene: fix kbuild warnings
Fixed the following kbuild warnings:
1. unused variable 'of_id'
2. buffer overflow 'ring_cfg' 5 <= 5

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 22:30:07 -04:00
Georgi Djakov
5d45ed8f5b clk: qcom: Fix MSM8916 gfx3d_clk_src configuration
The gfx3d_clk_src parents configuration is incorrect. Fix it.

Fixes: 3966fab8b6 "clk: qcom: Add MSM8916 Global Clock Controller support"
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-30 18:42:55 -07:00
Georgi Djakov
52cdc33c38 clk: qcom: Fix MSM8916 venus divider value
One of the video codec clock frequencies has incorrect divider
value. Fix it.

Fixes: 3966fab8b6 "clk: qcom: Add MSM8916 Global Clock Controller support"
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-30 18:42:48 -07:00
Stephen Boyd
6e5ab41b10 clk: Update some comments to reflect reality
The debugfs clk directory no longer expresses a clk tree. Update
the comments around that apporiately. Also drop comments about
prepare locks needing to be held as we have the proper
annotations with lockdep_assert_held().

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-30 16:28:41 -07:00
Stephen Boyd
4dff95dc94 clk: Remove forward declared function prototypes
Move the code around so that we don't need to declare function
prototypes at the start of the file. Simplify
clk_core_is_prepared() and clk_core_is_enabled() too to make the
diff easier to read.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-30 16:28:39 -07:00
Stephen Boyd
1f3e198342 clk: Remove impossible if condition in clk_core_get_phase()
This condition can't ever be true because this function is static
and it's always called with a non-NULL pointer.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-30 16:28:37 -07:00
Stephen Boyd
d7d131512b clk: Drop unnecessary OOM prints
We don't need to print error messages when allocations fail.
We'll get a nice backtrace in such situations anyway.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-30 16:28:35 -07:00
Dong Aisheng
864e160ae5 clk: Squash __clk_{enable,disable}() into callers
These functions are only used in one place. Let's squash them
into their respective callers to save some lines.

Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
[sboyd@codeaurora.org: Redo commit text, add NULL check in
clk_enable()]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-30 16:28:33 -07:00
Stephen Boyd
d6968fca78 clk: s/clk/core/ for struct clk_core
While introducing struct clk_core we tried to minimize the diff
by changing the type of 'clk' variables from struct clk to struct
clk_core without changing the names of the variables. Now that
the split is complete, the code is slightly confusing when it
mixes variables called 'clk' and variables called 'core' that are
of the same type struct clk_core. Let's be consistent and use
'core' everywhere we have a struct clk_core pointer and 'clk'
when we have a struct clk pointer.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-30 16:28:24 -07:00
Linus Torvalds
4a152c3913 Power management and ACPI fixes for v4.1-rc2
- Fix for a regression in the cpuidle core introduced by one of
    the recent commits in the clockevents_notify() removal series
    that put a call to a function which had to be executed with
    disabled interrupts into a code path running with enabled
    interrupts (Rafael J Wysocki).
 
  - Fix for a build problem in ACPICA (with GCC 4.5) introduced by one
    of the recent ACPICA tools commits that added a duplicate typedef
    to one of the ACPICA's header files by mistake (Olaf Hering).
 
  - Fix for a regression in the ACPI SBS (Smart Battery Subsystem)
    driver introduced during the 3.18 development cycle causing the
    smart battery manager to be marked as not present when it should
    be marked as present (Chris Bainbridge).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJVQoeSAAoJEILEb/54YlRxuscP/3Vz98JY0P7sMLnxVU8RPBxW
 cBN7G7F1gZup66/yV3MzvYHbgOFwNdQ2aMVxN+qV7rVMw27uwHljVr3svB+/GS15
 TeyKxvFWZYwhPKdsNAoHdkGBsptAK4DdyA+N2wH3MZ4dd8HepxpBG6QvzaEt4s43
 wFhhFrzEP3HDjrPoF/7TwKbsSrFuU5/U5PTd3dIuukj6JAl0PWnjczuVsg1PRyCW
 9kvefs3U56s8GbWOhDC+QyQ3eYJ2y35j/XnCKFWwljcdnis6HpsKj+oxSG2o0K4o
 9LLL3MgnTQuFbenuFIJUsMdFFdFrFkEeiV1EAdKCzQcXdlipxvi2cPttdNWVd6eZ
 JobXyhq7iYUQK5E5Dp6TCokxhzOyjvTo7VmEkkkqLVmfeO0FnggUAduRMAIacYXS
 ZML45m4UtvCJRoQXXxyzwYQXFeRD/nJQlOavC95jGGqtAij0Xk4xqTauQKIiqiaE
 zobOJ5ZxJMP+njFfzyDxjm68LjobYm1fUJTpWzpUSExjEKImRcw/QMzw23MyHHUL
 IJ7hP8FcELglkZWk/0ZwoNhbwM5Q2qGX5WMtqyunNFcf83aBsCr8bSjOrm4zmuL7
 NWjjeXuYwzPuC7SnFqf2K/CCfdkrdnU1frKLTpOm8t8W0P4mr1ckYrPemNemr8sN
 e5GozK5m13T2gTT4+q6M
 =v78a
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI fixes from Rafael Wysocki:
 "Three regression fixes this time, one for a recent regression in the
  cpuidle core affecting multiple systems, one for an inadvertently
  added duplicate typedef in ACPICA that breaks compilation with GCC 4.5
  and one for an ACPI Smart Battery Subsystem driver regression
  introduced during the 3.18 cycle (stable-candidate).

  Specifics:

   - Fix for a regression in the cpuidle core introduced by one of the
     recent commits in the clockevents_notify() removal series that put
     a call to a function which had to be executed with disabled
     interrupts into a code path running with enabled interrupts (Rafael
     J Wysocki)

   - Fix for a build problem in ACPICA (with GCC 4.5) introduced by one
     of the recent ACPICA tools commits that added a duplicate typedef
     to one of the ACPICA's header files by mistake (Olaf Hering)

   - Fix for a regression in the ACPI SBS (Smart Battery Subsystem)
     driver introduced during the 3.18 development cycle causing the
     smart battery manager to be marked as not present when it should be
     marked as present (Chris Bainbridge)"

* tag 'pm+acpi-4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle: Run tick_broadcast_exit() with disabled interrupts
  ACPI / SBS: Enable battery manager when present
  ACPICA: remove duplicate u8 typedef
2015-04-30 14:23:31 -07:00
Chris Bainbridge
3349fb64b2 ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook
Commit 7bc5a2bad0 'ACPI: Support _OSI("Darwin") correctly' caused
the MacBook firmware to expose the SBS, resulting in intermittent
hangs of several minutes on boot, and failure to detect or report
the battery.  Fix this by adding a 5 us delay to the start of each
SMBUS transaction.  This timing is the result of experimentation -
hangs were observed with 3 us but never with 5 us.

Fixes: 7bc5a2bad0 'ACPI: Support _OSI("Darwin") correctly'
Link: https://bugzilla.kernel.org/show_bug.cgi?id=94651
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Cc: 3.18+ <stable@vger.kernel.org> # 3.18+
[ rjw: Subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-30 23:18:11 +02:00
Peter Jones
f2f6b587c5 efi/esrt: Fix some compiler warnings
Apparently I missed some compiler warnings on 32-bit platforms, where
phys_addr_t isn't the same size as void * and I casted it to make printk
work.  Obviously I should have thought "I'm printing some random type,
instead of typecasting I should check Documentation/printk-formats.txt
and see how to do it." o/~ The More You Know ☆彡 o/~

This patch also fixes one other warning about an uninitialized variable
some compiler versions seem to see.  You can't actually hit the code
path where it would be uninitialized, because there's a prior test that
would error out, but gcc hasn't figured that out.  Anyway, it now has a
test and returns the error at both places.

Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2015-04-30 22:15:06 +01:00
Peter Jones
0bb549052d efi: Add esrt support
Add sysfs files for the EFI System Resource Table (ESRT) under
/sys/firmware/efi/esrt and for each EFI System Resource Entry under
entries/ as a subdir.

The EFI System Resource Table (ESRT) provides a read-only catalog of
system components for which the system accepts firmware upgrades via
UEFI's "Capsule Update" feature.  This module allows userland utilities
to evaluate what firmware updates can be applied to this system, and
potentially arrange for those updates to occur.

The ESRT is described as part of the UEFI specification, in version 2.5
which should be available from http://uefi.org/specifications in early
2015.  If you're a member of the UEFI Forum, information about its
addition to the standard is available as UEFI Mantis 1090.

For some hardware platforms, additional restrictions may be found at
http://msdn.microsoft.com/en-us/library/windows/hardware/jj128256.aspx ,
and additional documentation may be found at
http://download.microsoft.com/download/5/F/5/5F5D16CD-2530-4289-8019-94C6A20BED3C/windows-uefi-firmware-update-platform.docx
.

Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2015-04-30 22:15:04 +01:00
Dan Carpenter
f7ef7e3e50 efi: efivar_create_sysfs_entry() should return negative error codes
It's not very normal to return 1 on failure and 0 on success.  There
isn't a reason for it here, the callers don't care so long as it's
non-zero on failure.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2015-04-30 22:15:03 +01:00
Roberta Dobrescu
6920ccf65d staging: iio: light: isl29018: Use standard sysfs attributes for scale and integration time
This patch refactors the isl29018 driver code in order to use standard
sysfs attributes for scale and integration time.

ISL29018 light sensor uses four ranges and four ADC's resolutions
which influence the calculated lux. Adc resolution is strongly
connected to integration time and range should be controlled by scale.

This patch introduces the usage of integration time and scale instead
of adc resolution and range.

Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-30 21:55:35 +01:00
Markus Pargmann
e813bb2b95 net: fec: Fix RGMII-ID mode
RGMII-ID uses an internal delay within the transmitter or receiver. This
feature is phy specific. The rest of the communication is normal RGMII.

So the fec driver has to check for all RGMII modes, not only
'PHY_INTERFACE_MODE_RGMII'.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 16:48:53 -04:00
Ido Shamay
07841f9d94 net/mlx4_en: Schedule napi when RX buffers allocation fails
When system is out of memory, refilling of RX buffers fails while
the driver continue to pass the received packets to the kernel stack.
At some point, when all RX buffers deplete, driver may fall into a
sleep, and not recover when memory for new RX buffers is once again
availible. This is because hardware does not have valid descriptors,
so no interrupt will be generated for the driver to return to work
in napi context. Fix it by schedule the napi poll function from
stats_task delayed workqueue, as long as the allocations fail.

Signed-off-by: Ido Shamay <idos@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 16:47:50 -04:00
Tony Camuso
c232d8a8bb netxen_nic: use spin_[un]lock_bh around tx_clean_lock
While testing this driver with DEBUG_LOCKDEP and DEBUG_SPINLOCK
enabled did not produce any traces, it would be more prudent in the
case of tx_clean_lock to use spin_[un]lock_bh, since this lock is
manipulated in both the process and softirq contexts.

This patch was tested for functionality and regressions with netperf
and DEBUG_LOCKDEP and DEBUG_SPINLOCK enabled.

Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 16:37:29 -04:00
Ivan Vecera
18824894db be2net: log link status
The driver unlike other drivers does not log link state changes. It's
better for an user when asynchronous link states are logged to the system
log.

v3: Changes from v2 discarded as "not necessary"

Cc: Sathya Perla <sathya.perla@emulex.com>
Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com>
Cc: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 16:36:22 -04:00
Thomas Falcon
9c7e8bc584 ibmveth: Add support for Large Receive Offload
Enables receiving large packets from other LPARs. These packets
have a -1 IP header checksum, so we must recalculate to have
a valid checksum.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 16:33:46 -04:00
Thomas Falcon
92ec8279f5 ibmveth: Add GRO support
Cc: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 16:33:46 -04:00
Thomas Falcon
8641dd8579 ibmveth: Add support for TSO
Add support for TSO.  TSO is turned off by default and
must be enabled and configured by the user.  The driver
version number is increased so that users can be sure
that they are using ibmveth with TSO support.

Cc: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 16:33:45 -04:00
Thomas Falcon
cd7c7ec368 ibmveth: change rx buffer default allocation for CMO
This patch enables 64k rx buffer pools by default.  If Cooperative
Memory Overcommitment (CMO) is enabled, the number of 64k buffers
is reduced to save memory.

Cc: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 16:33:45 -04:00
kbuild test robot
fd5e2fd053 staging: lustre: llite: fix ifnullfree.cocci warnings
drivers/staging/lustre/lustre/llite/dir.c:1440:3-8: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values.

 NULL check before some freeing functions is not needed.

 Based on checkpatch warning
 "kfree(NULL) is safe this check is probably not required"
 and kfreeaddr.cocci by Julia Lawall.

Generated by: scripts/coccinelle/free/ifnullfree.cocci

CC: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-30 22:27:38 +02:00
kbuild test robot
0550db925b staging: lustre: llite: fix ifnullfree.cocci warnings
drivers/staging/lustre/lustre/llite/llite_lib.c:989:2-7: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values.
drivers/staging/lustre/lustre/llite/llite_lib.c:991:2-7: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values.

 NULL check before some freeing functions is not needed.

 Based on checkpatch warning
 "kfree(NULL) is safe this check is probably not required"
 and kfreeaddr.cocci by Julia Lawall.

Generated by: scripts/coccinelle/free/ifnullfree.cocci

CC: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-30 22:27:38 +02:00
kbuild test robot
25e428999c staging: lustre: fix ifnullfree.cocci warnings
drivers/staging/lustre/lustre/lov/lov_request.c:74:3-8: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values.

 NULL check before some freeing functions is not needed.

 Based on checkpatch warning
 "kfree(NULL) is safe this check is probably not required"
 and kfreeaddr.cocci by Julia Lawall.

Generated by: scripts/coccinelle/free/ifnullfree.cocci

CC: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-30 22:27:38 +02:00
kbuild test robot
c93f5463e3 staging: lustre: fix ifnullfree.cocci warnings
drivers/staging/lustre/lustre/lov/lov_obd.c:574:3-8: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values.

 NULL check before some freeing functions is not needed.

 Based on checkpatch warning
 "kfree(NULL) is safe this check is probably not required"
 and kfreeaddr.cocci by Julia Lawall.

Generated by: scripts/coccinelle/free/ifnullfree.cocci

CC: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-30 22:27:38 +02:00
David Ahern
17d5ceb6e4 net/mlx4_core: Fix unaligned accesses
Addresses the following kernel logs seen during boot:

Kernel unaligned access at TPC[100ee150] mlx4_QUERY_HCA+0x80/0x248 [mlx4_core]
Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core]
Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core]
Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core]
Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core]

Signed-off-by: David Ahern <david.ahern@oracle.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 16:26:30 -04:00
Benjamin Poirier
f94813f3c1 mlx4_en: Use correct loop cursor in error path.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Fixes: 9e311e7 ("net/mlx4_en: Use affinity hint")
Acked-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 16:25:14 -04:00
Jiang Liu
2c62e8492e x86/PCI/ACPI: Make all resources except [io 0xcf8-0xcff] available on PCI bus
An IO port or MMIO resource assigned to a PCI host bridge may be
consumed by the host bridge itself or available to its child
bus/devices. The ACPI specification defines a bit (Producer/Consumer)
to tell whether the resource is consumed by the host bridge itself,
but firmware hasn't used that bit consistently, so we can't rely on it.

Before commit 593669c2ac ("x86/PCI/ACPI: Use common ACPI resource
interfaces to simplify implementation"), arch/x86/pci/acpi.c ignored
all IO port resources defined by acpi_resource_io and
acpi_resource_fixed_io to filter out IO ports consumed by the host
bridge itself.

Commit 593669c2ac ("x86/PCI/ACPI: Use common ACPI resource interfaces
to simplify implementation") started accepting all IO port and MMIO
resources, which caused a regression that IO port resources consumed
by the host bridge itself became available to its child devices.

Then commit 63f1789ec7 ("x86/PCI/ACPI: Ignore resources consumed by
host bridge itself") ignored resources consumed by the host bridge
itself by checking the IORESOURCE_WINDOW flag, which accidently removed
MMIO resources defined by acpi_resource_memory24, acpi_resource_memory32
and acpi_resource_fixed_memory32.

On x86 and IA64 platforms, all IO port and MMIO resources are assumed
to be available to child bus/devices except one special case:
    IO port [0xCF8-0xCFF] is consumed by the host bridge itself
    to access PCI configuration space.

So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF]. This solution
will also ease the way to consolidate ACPI PCI host bridge common code
from x86, ia64 and ARM64.

Related ACPI table are archived at:
https://bugzilla.kernel.org/show_bug.cgi?id=94221

Related discussions at:
http://patchwork.ozlabs.org/patch/461633/
https://lkml.org/lkml/2015/3/29/304

Fixes: 63f1789ec7 (Ignore resources consumed by host bridge itself)
Reported-by: Bernhard Thaler <bernhard.thaler@wvnet.at>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: 4.0+ <stable@vger.kernel.org> # 4.0+
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-30 22:17:34 +02:00
Iyappan Subramanian
561fea6dea drivers: net: xgene: Add SGMII based 1GbE support with ring manager v2
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 16:03:14 -04:00
Iyappan Subramanian
bc1b7c132a drivers: net: xgene: Add 10GbE support with ring manager v2
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 16:03:13 -04:00
Iyappan Subramanian
ed9b7da019 drivers: net: xgene: Add ring manager v2 functions
Adding ring manager v2 support for APM X-Gene ethernet driver.

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 16:03:13 -04:00