... and simplify alloc_balloon_pages() interface by removing redundant
alloc_error from it.
If we happen to enter balloon_up() with balloon_wrk.num_pages = 0 we will enter
infinite 'while (!done)' loop as alloc_balloon_pages() will be always returning
0 and not setting alloc_error. We will also be sending a meaningless message to
the host on every iteration.
The 'alloc_unit == 1 && alloc_error -> num_ballooned == 0' change and
alloc_error elimination requires a special comment. We do alloc_balloon_pages()
with 2 different alloc_unit values and there are 4 different
alloc_balloon_pages() results, let's check them all.
alloc_unit = 512:
1) num_ballooned = 0, alloc_error = 0: we do 'alloc_unit=1' and retry pre- and
post-patch.
2) num_ballooned > 0, alloc_error = 0: we check 'num_ballooned == num_pages'
and act accordingly, pre- and post-patch.
3) num_ballooned > 0, alloc_error > 0: we report this chunk and remain within
the loop, no changes here.
4) num_ballooned = 0, alloc_error > 0: we do 'alloc_unit=1' and retry pre- and
post-patch.
alloc_unit = 1:
1) num_ballooned = 0, alloc_error = 0: this can happen in two cases: when we
passed 'num_pages=0' to alloc_balloon_pages() or when there was no space in
bl_resp to place a single response. The second option is not possible as
bl_resp is of PAGE_SIZE size and single response 'union dm_mem_page_range' is
8 bytes, but the first one is (in theory, I think that Hyper-V host never
places such requests). Pre-patch code loops forever, post-patch code sends
a reply with more_pages = 0 and finishes.
2) num_ballooned > 0, alloc_error = 0: we ran out of space in bl_resp, we
report partial success and remain within the loop, no changes pre- and
post-patch.
3) num_ballooned > 0, alloc_error > 0: pre-patch code finishes, post-patch code
does one more try and if there is no progress (we finish with
'num_ballooned = 0') we finish. So we try a bit harder with this patch.
4) num_ballooned = 0, alloc_error > 0: both pre- and post-patch code enter
'more_pages = 0' branch and finish.
So this patch has two real effects:
1) We reply with an empty response to 'num_pages=0' request.
2) We try a bit harder on alloc_unit=1 allocations (and reply with an empty
tail reply in case we fail).
An empty reply should be supported by host as we were able to send it even with
pre-patch code when we were not able to allocate a single page.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 79208c57da ("Drivers: hv: hv_balloon: Make adjustments in computing
the floor") was inacurate as it introduced a jump in our piecewiese linear
'floor' function:
At 2048MB we have:
Left limit:
104 + 2048/8 = 360
Right limit:
256 + 2048/16 = 384 (so the right value is 232)
We now have to make an adjustment at 8192 boundary:
232 + 8192/16 = 744
512 + 8192/32 = 768 (so the right value is 488)
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently we add memory in 128Mb blocks but the request from host can be
aligned differently. In such case we add a partially backed block and
when this block goes online we skip onlining pages which are not backed
(hv_online_page() callback serves this purpose). When we receive next
request for the same host add region we online pages which were not backed
before with hv_bring_pgs_online(). However, we don't check if the the block
in question was onlined and online this tail unconditionally. This is bad as
we avoid all online_pages() logic: these pages are not accounted, we don't
send notifications (and hv_balloon is not the only receiver of them),...
And, first of all, nobody asked as to online these pages. Solve the issue by
checking if the last previously backed page was onlined and onlining the tail
only in case it was.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's not necessary any longer, since we can safely run the blocking
message handlers in vmbus_connection.work_queue now.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the 2 fucntions can safely run in vmbus_connection.work_queue without
hang, we don't need to schedule new work items into the per-channel workqueue.
Actally we can even remove the per-channel workqueue now -- we'll do it
in the next patch.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A work item in vmbus_connection.work_queue can sleep, waiting for a new
host message (usually it is some kind of "completion" message). Currently
the new message will be handled in the same workqueue, but since work items
in the workqueue is serialized, we actually have no chance to handle
the new message if the current work item is sleeping -- as as result, the
current work item will hang forever.
K. Y. has posted the below fix to resolve the issue:
Drivers: hv: vmbus: Perform device register in the per-channel work element
Actually we can simplify the fix by directly running non-blocking message
handlers in the dispatch tasklet (inspired by K. Y.).
This patch is the fundamental change. The following 2 patches will simplify
the message offering and rescind-offering handling a lot.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keeping drivers related to HW tracing on ARM, i.e coresight,
under "drivers/coresight" doesn't make sense when other
architectures start rolling out technologies of the same
nature.
As such creating a new "drivers/hwtracing" directory where all
drivers of the same kind can reside, reducing namespace
pollution under "drivers/".
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Knowing the state of various control register is always
useful for degging and tuning. As such add an entry in
sysfs that expose to userspace the most important registers.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>From the TMC TRM, the ETF can be configured as buffer mode, so ETF can
be a sink type.
Signed-off-by: Xia Kaixu <kaixu.xia@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most CoreSight blocks are 64-bit ready. As such move configuration
entries from "arch/arm/Kconfig.config" to the driver's subdirectory
and source the newly created Kconfig from architecture specific
Kconfig.debug files.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Compiling coresight drivers with a 64-bit compiler highlights a couple
of formatting issues, which are fixed by this patch.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function "get_logical_index()" is not available on arm64.
Instead of adding the function simply using "of_get_cpu_node()" and
comparing the return value with cpu handles yields the same
result.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code here is checking for IS_ERR() when request_mem_region() only
returns NULL on error and never an ERR_PTR.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The API allows the application to flush a host-to-FPGA stream by calling
write() with the data count set to zero. Before this patch, copy_from_user()
was called with a non-zero byte count, which possibly made it attempt to read
from unmapped user memory. Such attempts caused the driver to return -EFAULT
instead of 0, even though the desired operation went through fine.
This patch ensures the driver returns 0 on a successful flush.
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pci core now disables msi on probe automatically,
drop this from device-specific code.
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qualcomm PMIC arbiter driver already depends on ARCH_QCOM,
which could be either ARM or ARM64. New version of the PMIC
arbiter controller is available on 64 bit platforms.
Remove ARM dependency to allow driver to be build for 64 bit
platforms.
Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the normal return values for bool functions
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make the miscdevice accessible through the file's private_data.
Previously, this was done only when an open() file operation had been
registered. If no custom open() file operation was defined,
private_data was set to NULL.
This subtle quirk was confusing, to the point where kernel code
registered *empty* file open operations to have private_data point to
the misc device structure and avoid duplicating that logic.
And it could easily lead to bugs, where the addition or removal of a
custom open() file operation surprisingly changes the initial value of
a file's private_data structure.
To resolve this, we now place the miscdevice in the file's private_data
member unconditionally when open() is called.
Signed-off-by: Tom Van Braeckel <tomvanbraeckel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 4d8beff2ae.
It causes build warnings, and it's incorrect as we do write to this
structure.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is supposed to be ->rates_ex[] instead of ->rates[]. I found this
because static checkers complain than ->rates is too small so we're
reading beyond the end of the array. It has 12 elements instead of 15.
This bug was apparently copy and pasted from ipw2x00. I fixed it before
in that driver 428e3cf5f9 ('ipw2x00: printing the wrong array in
debug code')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Multiline comments use "network subsystem comment style"
- Merge short multiline comments
- Remove empty comments
- Remove function name comment at the end of small (<1 screen) functions
- Reformat 802.11 data frame format to use spaces and network format
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace custom hex dumping function with print_hex_dump_bytes()
to make checkpatch.pl happy
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix 'braces {} are not necessary for single statement blocks'
checkpatch.pl warning
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro caused checkpatch.pl warning and is not used.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix 'void function return statements are not generally useful'
checkpatch.pl warnings
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch warnings 'else is not generally useful after a break or return'
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit removes a number of unneeded comments. Two of the
aforementioned comments were most likely meant to aid with version
control, whereas the remaining two comments relate to (now unused)
local variable names.
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rework the trace log-related lines in rtl8723au's rtw_security.c
to use the __func__ GCC magic variable instead of hardcoding the
function names into the trace log strings. This also corrects a
copy-paste-related typo in the function named rtw_tkip_decrypt23a.
Thanks to Jes Sorensen for the suggestion to use __func__.
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prior to this commit, rtl8723au's rtw_security.c had two instances of
byte array comparisons (for CRC checks) where the individual elements
of the byte arrays were compared one by one and an error trace would
be output if the byte arrays were determined to be different.
This commit improves the readability of the CRC verification by
placing the individual 4 bytes of each byte array into an 32-bit
unsigned integer and comparing the two resulting integers.
Thanks to Larry Finger for spotting the code style issues in the
previous version of this commit, and thanks to Joe Perches for
suggesting the use of 32-bit integer comparisons instead of byte
array comparisons.
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct a number of indentation-with-spaces-and-tabs issues in
rtl8723au's rtw_security.c, according to checkpatch.pl:
WARNING: suspect code indent for conditional statements
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the subject indicates, adjust whitespace in and around comments
in rtl8723au's rtw_security.c.
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prior to this commit, a large block of constants used to represent
an AES S-box table were indented with spaces in rtl8723au's
rtw_security.c. Correct the checkpatch.pl warnings indicating that
spaces should not be used to indent lines:
WARNING: please, no spaces at the start of a line
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct two instances of the checkpatch.pl error indicating that the
opening curly braces should not be on new lines:
ERROR: that open brace { should be on the previous line
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct a number of checkpatch.pl errors in rtl8723au's rtw_security.c
related to trailing statements:
ERROR: trailing statements should be on next line
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct a number of checkpatch.pl warnings in rtl8723au's rtw_security.c
related to the existence of unnecessary curly braces around single
statement blocks:
WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct a checkpatch.pl warning regarding rtl8723au's
rtw_security.c::crc32_init pointing out that having an else statement
after a break or a return is not useful.
drivers/staging/rtl8723au/core/rtw_security.c:105:
WARNING: else is not generally useful after a break or return
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prior to this commit, functions rtw_tkip_encrypt23a and rtw_tkip_decrypt23a had
large if blocks which contained the majority of the logic in the functions.
Rework these functions so that if the negated version of the aforementioned if
blocks' conditions are true, we return from the function with _FAIL, as
expected by the calling code.
This lets us remove two levels of indentation from the functions in
question, making them more readable.
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct the indentation of two lines in rtw_tkip_encrypt23a function in
rtl8723au's rtw_security.c.
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct checkpatch.pl errors in rtl8723au's rtw_security.c indicating
that an else statement should follow the closing brace of the previous
if/else if code block:
ERROR: else should follow close brace '}'
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct a number of "space(s) required before/around/after" checkpatch.pl
issues in a number of functions in rtl8723au's rtw_security.c.
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the target sleep state of the system is not an ACPI sleep state
(S1, S2 or S3), the TCO watchdog needs to be stopped during system
suspend, because it may not be possible to ping it any more after
timekeeping has been suspended (suspend-to-idle does that for
one example).
For this reason, provide ->suspend_noirq and ->resume_noirq
callbacks for the iTCO watchdog driver and use them to stop
and restart the watchdog during system suspend and resume,
respectively, if the system is not going to enter an ACPI
sleep state (in which case the watchdog will be stopped
by the platform firmware before the state is entered).
Reported-and-tested-by: Borun Fu <borun.fu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Adjust the whitespace in the signature, local variable declaration and
initialization parts of a number of functions to increase readability
in rtl8723au's rtw_security.c.
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The result of netdev_priv is already implicitly cast to the type of the
left side of the assignment.
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
type T;
T *x;
@@
x =
- (T *)
netdev_priv(...)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>