PNP IDs are supposed to be case-insensitive and so we should compare
them as such.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This adds a key input driver for the keys found on the h3xxx
iPAQ series.
Based on a driver from handhelds.org 2.6.21 kernel, written
by Alessandro GARDICH.
Signed-off-by: Alessandro GARDICH <gremlin@gremlin.it>
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This patch adds support for haptic on max77843 MFD (Multi Function Device)
with PMIC, MUIC, LED, CHARGER.
This driver supports external pwm and LRA (Linear Resonant Actuator) motor.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
[Jim Davis <jim.epost@gmail.com>: should depend on REGULATOR not PWM]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- Fix ACPI resources management problems introduced by the recent
rework of the code in question (Jiang Liu) and a build issue
introduced by those changes (Joachim Nilsson).
- Fix a recent suspend-to-idle regression on systems where entering
idle states causes local timers to stop, prevent suspend-to-idle
from crashing in restricted configurations (no cpuidle driver,
cpuidle disabled etc.) and clean up the idle loop somewhat while
at it (Rafael J Wysocki).
- Fix build problem in the cpufreq ppc driver (Geert Uytterhoeven).
- Allow the ACPI backlight driver module to be loaded if ACPI is
disabled which helps the i915 driver in those configurations
(stable-candidate) and change the code to help debug unusual use
cases (Chris Wilson).
- Wakeup IRQ management changes in v3.18 caused some drivers on the
at91 platform to trigger a warning from the IRQ core related to
an unexpected combination of interrupt action handler flags.
However, on at91 a timer IRQ is shared with some other devices
(including system wakeup ones) and that leads to the unusual
combination of flags in question. To make it possible to avoid
the warning introduce a new interrupt action handler flag (which
can be used by drivers to indicate the special case to the core)
and rework the problematic at91 drivers to use it and work as
expected during system suspend/resume. From Boris Brezillon,
Rafael J Wysocki and Mark Rutland.
- Clean up the generic power domains subsystem's debugfs interface
(Kevin Hilman).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=nc5T
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These are fixes for recent regressions (ACPI resources management,
suspend-to-idle), stable-candidate fixes (ACPI backlight), fixes
related to the wakeup IRQ management changes made in v3.18, other
fixes (suspend-to-idle, cpufreq ppc driver) and a couple of cleanups
(suspend-to-idle, generic power domains, ACPI backlight).
Specifics:
- Fix ACPI resources management problems introduced by the recent
rework of the code in question (Jiang Liu) and a build issue
introduced by those changes (Joachim Nilsson).
- Fix a recent suspend-to-idle regression on systems where entering
idle states causes local timers to stop, prevent suspend-to-idle
from crashing in restricted configurations (no cpuidle driver,
cpuidle disabled etc.) and clean up the idle loop somewhat while at
it (Rafael J Wysocki).
- Fix build problem in the cpufreq ppc driver (Geert Uytterhoeven).
- Allow the ACPI backlight driver module to be loaded if ACPI is
disabled which helps the i915 driver in those configurations
(stable-candidate) and change the code to help debug unusual use
cases (Chris Wilson).
- Wakeup IRQ management changes in v3.18 caused some drivers on the
at91 platform to trigger a warning from the IRQ core related to an
unexpected combination of interrupt action handler flags. However,
on at91 a timer IRQ is shared with some other devices (including
system wakeup ones) and that leads to the unusual combination of
flags in question.
To make it possible to avoid the warning introduce a new interrupt
action handler flag (which can be used by drivers to indicate the
special case to the core) and rework the problematic at91 drivers
to use it and work as expected during system suspend/resume. From
Boris Brezillon, Rafael J Wysocki and Mark Rutland.
- Clean up the generic power domains subsystem's debugfs interface
(Kevin Hilman)"
* tag 'pm+acpi-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
genirq / PM: describe IRQF_COND_SUSPEND
tty: serial: atmel: rework interrupt and wakeup handling
watchdog: at91sam9: request the irq with IRQF_NO_SUSPEND
cpuidle / sleep: Use broadcast timer for states that stop local timer
clk: at91: implement suspend/resume for the PMC irqchip
rtc: at91rm9200: rework wakeup and interrupt handling
rtc: at91sam9: rework wakeup and interrupt handling
PM / wakeup: export pm_system_wakeup symbol
genirq / PM: Add flag for shared NO_SUSPEND interrupt lines
ACPI / video: Propagate the error code for acpi_video_register
ACPI / video: Load the module even if ACPI is disabled
PM / Domains: cleanup: rename gpd -> genpd in debugfs interface
cpufreq: ppc: Add missing #include <asm/smp.h>
x86/PCI/ACPI: Relax ACPI resource descriptor checks to work around BIOS bugs
x86/PCI/ACPI: Ignore resources consumed by host bridge itself
cpuidle: Clean up fallback handling in cpuidle_idle_call()
cpuidle / sleep: Do sanity checks in cpuidle_enter_freeze() too
idle / sleep: Avoid excessive disabling and enabling interrupts
PCI: versatile: Update for list_for_each_entry() API change
genirq / PM: better describe IRQF_NO_SUSPEND semantics
Commit fab4c256a5 ("PCI/AER: Add a TLP header print helper") introduced
the helper function __print_tlp_header(), but contrary to the intention,
the behaviour did change: Since we're taking the address of the parameter
t, the first 4 or 8 bytes printed will be the value of the pointer t
itself, and the remaining 12 or 8 bytes will be who-knows-what (something
from the stack).
We want to show the values of the four members of the struct
aer_header_log_regs; that can be done without ugly and error-prone casts.
On little-endian this should produce the same output as originally
intended, and since no-one has complained about getting garbage output so
far, I think big-endian should be ok too.
Fixes: fab4c256a5 ("PCI/AER: Add a TLP header print helper")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Borislav Petkov <bp@suse.de>
CC: stable@vger.kernel.org # v3.14+
This patch introduces the use of API function setup_timer
instead of driver specific function _init_timer as it is
the preferred and standard way to setup and set the timer.
To be compatible with the change, argument types of
referenced functions are changed. Also, definition of
function _init_timer is removed as it is no longer needed
after this change.
This is done using Coccinelle and semantic patch used for
this is as follows:
@@ expression x, y; identifier a, b;@@
- _init_timer (&x, y, a, b);
+ setup_timer (&x, a, (unsigned long)b);
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The replacement was done by the
following coccinelle script:
@header@
@@
#include <linux/etherdevice.h>
@eth_zero_addr@
expression e;
@@
-memset(e,0,ETH_ALEN);
+eth_zero_addr(e);
@eth_broadcast_addr@
identifier e;
@@
-memset(e,\(0xff\|0xFF\|255\),ETH_ALEN);
+eth_broadcast_addr(e);
@linux_header depends on !header && (eth_zero_addr || eth_broadcast_addr) @
@@
+ #include <linux/etherdevice.h>
+
@special_header depends on !header && !linux_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
+
@custom_header depends on !header && !linux_header && !special_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The replacement was done by the
following coccinelle script:
@header@
@@
#include <linux/etherdevice.h>
@eth_zero_addr@
expression e;
@@
-memset(e,0,ETH_ALEN);
+eth_zero_addr(e);
@eth_broadcast_addr@
identifier e;
@@
-memset(e,\(0xff\|0xFF\|255\),ETH_ALEN);
+eth_broadcast_addr(e);
@linux_header depends on !header && (eth_zero_addr || eth_broadcast_addr) @
@@
+ #include <linux/etherdevice.h>
+
@special_header depends on !header && !linux_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
+
@custom_header depends on !header && !linux_header && !special_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The replacement was done by the
following coccinelle script:
@header@
@@
#include <linux/etherdevice.h>
@eth_zero_addr@
expression e;
@@
-memset(e,0,ETH_ALEN);
+eth_zero_addr(e);
@eth_broadcast_addr@
identifier e;
@@
-memset(e,\(0xff\|0xFF\|255\),ETH_ALEN);
+eth_broadcast_addr(e);
@linux_header depends on !header && (eth_zero_addr || eth_broadcast_addr) @
@@
+ #include <linux/etherdevice.h>
+
@special_header depends on !header && !linux_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
+
@custom_header depends on !header && !linux_header && !special_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The replacement was done by the
following coccinelle script:
@header@
@@
#include <linux/etherdevice.h>
@eth_zero_addr@
expression e;
@@
-memset(e,0,ETH_ALEN);
+eth_zero_addr(e);
@eth_broadcast_addr@
identifier e;
@@
-memset(e,\(0xff\|0xFF\|255\),ETH_ALEN);
+eth_broadcast_addr(e);
@linux_header depends on !header && (eth_zero_addr || eth_broadcast_addr) @
@@
+ #include <linux/etherdevice.h>
+
@special_header depends on !header && !linux_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
+
@custom_header depends on !header && !linux_header && !special_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace duplicate branch with correct value. This branch
is supposed to work for low thresh value.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch eliminates use of unnecessory macro IS_NIC_DOWN
and replaces it with standard code.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
static ints are initialized to 0 by the compiler.
Explicit initialization is not necessary.
Found by checkpatch.pl - ERROR: do not initialise statics to 0 or NULL
changes made using coccinelle script:
@@
type T;
identifier var;
@@
-static T var = 0;
+static T var;
Signed-off-by: Supriya Karanth <iskaranth@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following files were added define guards to prevent multiple
inclusion.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
adds checks on variables that are used to return values. If
the value is less than zero, this indicates that an error
occurred and hence a message is printed through dev_err.
Checks are made on negative values only since spi_* functions
return negative error codes.
The functions were found using the following script but the
aforementioned modification was what was carried out in the end:
@@
identifier len,f;
@@
-int len;
... when != len
when strict
-len =
+return
f(...);
-return len;
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes a if condition which has a semicolon
after it. As the conditional check is redundant, the comment
before it is also changed. The following
coccinelle script was used to detect the pattern of a
semicolon after if.
@r1@
position p;
@@
if (...);@p
@script:python@
p0 << r1.p;
@@
// Emacs org-mode output
cocci.print_main("", p0)
cocci.print_secs("", p0)
Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following checkpatch warning was fixed:
Prefer [subsystem eg: netdev]_err([subsystem]dev
with the help of Coccinelle. pr_cont() was used to replace those printk
statements which followed a printk that did not end with a '\n'. The following
semantic patch was used to replace printk() with pr_err():
@a@
expression e;
@@
printk(e,...);
@script:python b@
e << a.e;
y;
@@
import re
match = re.match('KERN_ERR ', e);
if (match == None):
cocci.include_match(False)
else:
m = re.sub('KERN_ERR ', '', e)
coccinelle.y = m;
@c@
expression a.e;
identifier b.y;
@@
- printk(e,
+ pr_err(y,
...);
Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following checkpatch warning was fixed:
Prefer [subsystem eg: netdev]_err([subsystem]dev
with the help of Coccinelle. The following semantic patch was used:
@a@
expression e;
@@
printk(e,...);
@script:python b@
e << a.e;
y;
@@
import re
match = re.match('KERN_ERR ', e);
if (match == None):
cocci.include_match(False)
else:
m = re.sub('KERN_ERR ', '', e)
coccinelle.y = m;
@c@
expression a.e;
identifier b.y;
@@
- printk(e,
+ pr_err(y,
...);
Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes custom printk macro ERR.
All the calls to this macro were replaced by de_err and pr_err.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the use of custom printk macros ERR and replace it
with dev_err, or pr_err in the following cases:
- if no appropriate struct device *dev field where found for dev_err.
- or dev could be null eg. "dev_err(udc->dev" not possible inside "if
(udc == null)"
Issue addressed by checkpatch.pl.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the test statement for an argument to _nbu2ss_pullup
function, for it can't be null due to previous derefrences.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>