The DMA event crossbar on AM33xx/AM43xx is different from the one found in
DRA7x family.
Instead of a single event crossbar it has 64 identical mux attached to each
eDMA event line. When the 0 event mux is selected, the default mapped event
is going to be routed to the corresponding eDMA event line. If different
mux is selected, then the selected event is going to be routed to the given
eDMA event.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Instead of nesting functions just merge them since the resulting function
is still small and readable.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The channel/slot reservation is not supported when booted with DT so there
is not need to allocate memory.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Move all code under one function to do the dma device and eDMA channel
related setup so they are not scattered around the driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Query the number of qDMA channels from CCCFG register.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
edma_assign_channel_eventq() is a wrapper around edma_map_dmach_to_queue()
We can merge the content of the later so we will have only one function
to be used for mapping channels to given eventq
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
These inline functions are designed to modify parts of the PaRAM in eDMA.
Change the names accordingly.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Instead of passing a pointer to struct edma_cc and the channel number,
pass only the pointer to the edma_chan structure for the given channel.
This struct contains all the information needed by the functions and the
use of this makes it obvious that most of the sanity checks can be removed
from the driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
If the transfer is shorted then 64K we can complete it with one ACNT burst
by configuring ACNT to the length of the copy, this require one paRAM slot.
Otherwise we use two paRAM slots for the copy:
slot1: will copy (length / 32767) number of 32767 byte long blocks
slot2: will be configured to copy the remaining data.
According to tests this patch increases the throughput of memcpy from
~3MB/s to 15MB/s
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Despite the claim by the original commit adding the memcpy
support, eDMA does not have constraint on the alignment of src, dst
or length in increment mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Initial link up defaults were not properly being tracked relative to
initial FLOGI or pt2pt PLOGI. Add code to initialize them.
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: James Smart <james.smart@avagotech.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Forgot to clear FCF Discovery in-progress flag upon FLOGI failures.
Thus we didn't restart FLOGI.
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: James Smart <james.smart@avagotech.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Fix for discovery failure in PT2PT when FLOGI's ELS ACC response gets aborted
Change login state machine to:
- Restart FLOGI if prior is ABTS'd
- Reject incoming FLOGIs if we have one pending
The above ensures that we always finish FLOGI processing, regardless
of who initated FLOGI, before processing PLOGI's.
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: James Smart <james.smart@avagotech.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: James Smart <james.smart@avagotech.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Add support for the FDB add, delete, and dump operations. The add and
delete operations are implemented using directed ARL operations using
the specified MAC address and consist in a read operation, write and
readback operation.
The dump operation consists in using the ARL search and software
filtering entries which are not for the desired port.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
lpfc_send_rscn_event() allocates data for sizeof(struct
lpfc_rscn_event_header) + payload_len, but claims that the data has size
of sizeof(struct lpfc_els_event_header) + payload_len. That leads to
buffer overruns.
Signed-off-by: Ales Novak <alnovak@suse.cz>
Signed-off-by: James Smart <james.smart@avagotech.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Remove set but not used variables.
Signed-off-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: James Smart <james.smart@avagotech.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
This makes the function lpfc_sli4_mbox_completion's definition
static now in order to comply with its prototype being also
declared as static too.
Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
Signed-off-by: James Smart <james.smart@avagotech.com>
Reviewed-by: Sebastian Herbszt <herbszt@gmx.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Currently the module parameter lpfc_sg_seg_count does not have effect
for sli3 devices.
In lpfc_sli_driver_resource_setup(), which is used for sli3, the code
writes the configured sg_seg_cnt into lpfc_template.sg_tablesize.
But lpfc_template is the template used for sli4 only. Thus the value should
correctly be written to lpfc_template_s3->sg_tablesize.
This patch is for kernel 4.1-rc5, but is tested with lpfc 10.2.405.26 only.
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: James Smart <james.smart@avagotech.com>
Reviewed-by: Sebastian Herbszt <herbszt@gmx.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
kzalloc() returns a void pointer - no need to cast it in
drivers/scsi/lpfc/lpfc_init.c::lpfc_sli_driver_resource_setup()
Signed-off-by: Firo Yang <firogm@gmail.com>
Signed-off-by: James Smart <james.smart@avagotech.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Remove trailing space from model description.
Signed-off-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: James Smart <james.smart@avagotech.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Having a traceable function in the sched_clock() path leads to a recursion
within ftrace and a kernel crash.
We should not trace digicolor_timer_sched_read() function. Fix this by adding
the notrace attribute to this function.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Having a traceable function in the sched_clock() path leads to a recursion
within ftrace and a kernel crash.
We should not trace the ftm_read_sched_clock() function.
Fix this by adding the notrace attribute to this function.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Having a traceable function in the sched_clock() path leads to a recursion
within ftrace and a kernel crash.
We should not trace the pit_read_sched_clock() function. Fix this by adding a
notrace attribute to this function.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Currently prima2 timer can be used as a scheduler clock. We properly
marked sirfsoc_read_sched_clock() as notrace but we then call another
function sirfsoc_timer_read() that _wasn't_ notrace.
Having a traceable function in the sched_clock() path leads to a recursion
within ftrace and a kernel crash.
Fix this by adding notrace attribute to the sirfsoc_timer_read() function.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Currently samsung_pwm_timer can be used as a scheduler clock. We properly
marked samsung_read_sched_clock() as notrace but we then call another
function samsung_clocksource_read() that _wasn't_ notrace.
Having a traceable function in the sched_clock() path leads to a recursion
within ftrace and a kernel crash.
Fix this by adding notrace attribute to the samsung_clocksource_read()
function.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Currently pistachio can be used as a scheduler clock. We properly marked
pistachio_read_sched_clock() as notrace but we then call another function
pistachio_clocksource_read_cycles() that _wasn't_ notrace.
Having a traceable function in the sched_clock() path leads to a recursion
within ftrace and a kernel crash.
Fix this by adding notrace attribute to the pistachio_clocksource_read_cycles()
function.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Currently arm_global_timer can be used as a scheduler clock. We properly
marked gt_sched_clock_read() as notrace but we then call another function
gt_counter_read() that _wasn't_ notrace.
Having a traceable function in the sched_clock() path leads to a recursion
within ftrace and a kernel crash.
Fix this by adding an extra notrace function to keep other users of
gt_counter_read() traceable.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Remove the unneded semicolon since it is clearly a typo error.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
commit 92bac83dd7 ("Input: alps - non interleaved V2 dualpoint has
separate stick button bits") assumes that all alps v2 non-interleaved
dual point setups have the separate stick button bits.
Later we limited this to Dell laptops only because of reports that this
broke things on non Dell laptops. Now it turns out that this breaks things
on the Dell Latitude D600 too. So it seems that only the Dell Latitude
D420/430/620/630, which all share the same touchpad / stick combo,
have these separate bits.
This patch limits the checking of the separate bits to only these models
fixing regressions with other models.
Reported-and-tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable@vger.kernel.org
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-By: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Two late fixes for the AMD IOMMU driver:
* One adds an additional check to the io page-fault handler to
avoid a BUG_ON being hit in handle_mm_fault()
* Second patch fixes a problem with devices writing to the
system management area and were blocked by the IOMMU because
the driver wrongly cleared out the DTE flags allowing that
access.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=4Bny
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"Two late fixes for the AMD IOMMU driver:
- add an additional check to the io page-fault handler to avoid a
BUG_ON being hit in handle_mm_fault()
- fix a problem with devices writing to the system management area
and were blocked by the IOMMU because the driver wrongly cleared
out the DTE flags allowing that access"
* tag 'iommu-fixes-v4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Don't clear DTE flags when modifying it
iommu/amd: Fix BUG when faulting a PROT_NONE VMA
Two fixes for bugs that are in both raid1 and raid10.
Both related to bad-block-lists and at least one needs
to be back ported to 3.1.
Also a revision for the "new" layout in raid10.
This "new" code (which aims to improve robustness) actually
reduces robustness in some cases.
It probably isn't in use at all as not public user-space code
makes use of these new layouts.
However just in case someone has their own code, it would be
good to get the WARNing out for them sooner.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=96PZ
-----END PGP SIGNATURE-----
Merge tag 'md/4.3-rc6-fixes' of git://neil.brown.name/md
Pull md fixes from Neil Brown:
"Some raid1/raid10 fixes.
I meant to get this to you before -rc7, but what with all the travel
plans..
Two fixes for bugs that are in both raid1 and raid10. Both related to
bad-block-lists and at least one needs to be back ported to 3.1.
Also a revision for the "new" layout in raid10. This "new" code
(which aims to improve robustness) actually reduces robustness in some
cases. It probably isn't in use at all as not public user-space code
makes use of these new layouts. However just in case someone has
their own code, it would be good to get the WARNing out for them
sooner"
* tag 'md/4.3-rc6-fixes' of git://neil.brown.name/md:
md/raid10: fix the 'new' raid10 layout to work correctly.
md/raid10: don't clear bitmap bit when bad-block-list write fails.
md/raid1: don't clear bitmap bit when bad-block-list write fails.
md/raid10: submit_bio_wait() returns 0 on success
md/raid1: submit_bio_wait() returns 0 on success
Pull drm fixes from Dave Airlie:
"Last fixes from me: one amdgpu/radeon suspend resume and one leak fix,
along with one vmware fix for some issues when command submission
fails"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/amdgpu: don't try to recreate sysfs entries on resume
drm/radeon: don't try to recreate sysfs entries on resume
drm/amdgpu: stop leaking page flip fence
drm/vmwgfx: Stabilize the command buffer submission code
Change the READ/WRITE to FSL_READ/FSL_WRITE to resolve any possible
namespace collisions with READ/WRITE macros (e.g., from <linux/fs.h>).
Problems have been seen, for example, on mips:
>> drivers/mtd/spi-nor/fsl-quadspi.c:186:5: error: 'LUT_0' undeclared (first use in this function)
((LUT_##ins) << INSTR0_SHIFT))
^
>> drivers/mtd/spi-nor/fsl-quadspi.c:188:30: note: in expansion of macro 'LUT0'
On SPARC:
drivers/mtd/spi-nor/fsl-quadspi.c: In function 'fsl_qspi_init_lut':
drivers/mtd/spi-nor/fsl-quadspi.c:369:1: error: 'LUT_0' undeclared (first use in this function)
drivers/mtd/spi-nor/fsl-quadspi.c:418:1: error: pasting "LUT_" and "(" does not give a valid preprocessing token
drivers/mtd/spi-nor/fsl-quadspi.c:418:2: error: implicit declaration of function 'LUT_'
And surely on others.
Fixes: d26a22d067 ("mtd: fsl-quadspi: allow building for other ARCHes with COMPILE_TEST")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Han Xu <b45815@freescale.com>
[Brian: rewrote commit description]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
When CONFIG_MTD_PARTITIONED_MASTER=y, it is fatal to call
mtd_device_parse_register() twice on the same MTD, as we try to register
the same device/kobject multipile times.
When CONFIG_MTD_PARTITIONED_MASTER=n, calling
mtd_device_parse_register() is more of just a nuisance, as we can mostly
navigate around any conflicting actions.
But anyway, doing so is a Bad Thing (TM), and we should complain loudly
for any drivers that try to do this.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Since commit 3efe41be22 ("mtd: implement common reboot notifier
boilerplate"), we might try to register a reboot notifier for an MTD
that failed to register. Let's avoid this by making the error path
clearer.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Taking the grph update lock is only necessary when
updating the the secondary address (for single pipe stereo).
v2: fix comment as per Michel's suggestion
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Changes the 32-bit time type timeval to the 64-bit time type
ktime_t, since 32-bit systems using struct timeval will break in the
year 2038. Correspondingly change do_gettimeofday() to ktime_get()
since ktime_get returns a ktime_t, but do_gettimeofday returns a
struct timeval.Here, ktime_get() is used instead of ktime_get_real()
since ktime_get() uses monotonic clock.
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
This patch adds support for 4-bit ECC BCH4 for the SPEAr600 SoC. This can
be used by boards equipped with a NAND chip that requires 4-bit ECC
strength. The SPEAr600 HW ECC only supports 1-bit ECC strength.
To enable SW BCH4, you need to specify this in your nand controller
DT node:
nand-ecc-mode = "soft_bch";
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
Tested on a custom SPEAr600 board.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
[Brian: tweaked the comments a bit]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
If nand_wait_ready() times out, this is silently ignored, and its
caller will then proceed to read from/write to the chip before it is
ready. This can potentially result in corruption with no indication as
to why.
While a 20ms timeout seems like it should be plenty enough, certain
behaviour can cause it to timeout much earlier than expected. The
situation which prompted this change was that CPU 0, which is
responsible for updating jiffies, was holding interrupts disabled
for a fairly long time while writing to the console during a printk,
causing several jiffies updates to be delayed. If CPU 1 happens to
enter the timeout loop in nand_wait_ready() just before CPU 0 re-
enables interrupts and updates jiffies, CPU 1 will immediately time
out when the delayed jiffies updates are made. The result of this is
that nand_wait_ready() actually waits less time than the NAND chip
would normally take to be ready, and then read_page() proceeds to
read out bad data from the chip.
The situation described above may seem unlikely, but in fact it can be
reproduced almost every boot on the MIPS Creator Ci20.
Therefore, this patch increases the timeout to 400ms. This should be
enough to cover cases where jiffies updates get delayed. In nand_wait()
the timeout was previously chosen based on whether erasing or
programming. This is changed to be 400ms unconditionally as well to
avoid similar problems there. nand_wait() is also slightly refactored
to be consistent with nand_wait{,_status}_ready(). These changes should
have no effect during normal operation.
Debugging this was made more difficult by the misleading comment above
nand_wait_ready() stating "The timeout is caught later" - no timeout was
ever reported, leading me away from the real source of the problem.
Therefore, a pr_warn() is added when a timeout does occur so that it is
easier to pinpoint similar problems in future.
Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
Reviewed-by: Niklas Cassel <niklas.cassel@axis.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
The clock consumer (CCU) of the CGU must be able to check if a CGU
base clock is really running since access to the CCU registers
requires a running base clock. Access with a disabled base clock will
cause the system to hang. Fix this issue by adding code that check if
the parent clock is running in the is_enabled clk_ops callback. Since
certain clocks can be cascaded this must be added to all clock gates.
The hang would occur if the boot ROM or boot loader didn't setup and
enable the USB0 clock. Then when the clk framework tried to access
the CCU register it would hang the system.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
CCU branch clock register must only be accessed while the base
(parent) clock is running. Access with a disabled base clock
will cause the system to hang. Fix this issue by adding code
that check if the parent clock is running in the is_enabled
clk_ops callback.
This hang would occur when disabling unused clocks after AMBA
runtime pm had already disabled some of the clocks.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add clk_hw_is_enabled() to the provider APIs so clk providers can
use a struct clk_hw instead of a struct clk to check if a clk is
enabled or not.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Smatch found a bug in the error handling:
drivers/mtd/devices/docg3.c:1634 doc_register_sysfs()
error: buffer overflow 'doc_sys_attrs' 4 <= 4
The problem is that if the very last device_create_file() fails, then we
are beyond the end of the array. Actually, any time i == 3 then there
is a problem. We can fix this an simplify the code at the same time by
moving the !ret conditions out of the for loops and using a goto
instead.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
With the previous modifications, lots of pxa3xx specific definitions can
be removed.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Rework the pxa3xx_nand driver to allow using functions exported by the
nand framework to detect the flash and the timings. Then setup the
timings using the helpers previously added.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
