Commit graph

79,509 commits

Author SHA1 Message Date
David Howells
1dce27c5aa Wrap accesses to the fd_sets in struct fdtable
Wrap accesses to the fd_sets in struct fdtable (for recording open files and
close-on-exec flags) so that we can move away from using fd_sets since we
abuse the fd_set structs by not allocating the full-sized structure under
normal circumstances and by non-core code looking at the internals of the
fd_sets.

The first abuse means that use of FD_ZERO() on these fd_sets is not permitted,
since that cannot be told about their abnormal lengths.

This introduces six wrapper functions for setting, clearing and testing
close-on-exec flags and fd-is-open flags:

	void __set_close_on_exec(int fd, struct fdtable *fdt);
	void __clear_close_on_exec(int fd, struct fdtable *fdt);
	bool close_on_exec(int fd, const struct fdtable *fdt);
	void __set_open_fd(int fd, struct fdtable *fdt);
	void __clear_open_fd(int fd, struct fdtable *fdt);
	bool fd_is_open(int fd, const struct fdtable *fdt);

Note that I've prepended '__' to the names of the set/clear functions because
they require the caller to hold a lock to use them.

Note also that I haven't added wrappers for looking behind the scenes at the
the array.  Possibly that should exist too.

Signed-off-by: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/20120216174942.23314.1364.stgit@warthog.procyon.org.uk
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
2012-02-19 10:30:52 -08:00
Martin K. Petersen
18a4d0a22e [SCSI] Handle disk devices which can not process medium access commands
We have experienced several devices which fail in a fashion we do not
currently handle gracefully in SCSI. After a failure these devices will
respond to the SCSI primary command set (INQUIRY, TEST UNIT READY, etc.)
but any command accessing the storage medium will time out.

The following patch adds an callback that can be used by upper level
drivers to inspect the results of an error handling command. This in
turn has been used to implement additional checking in the SCSI disk
driver.

If a medium access command fails twice but TEST UNIT READY succeeds both
times in the subsequent error handling we will offline the device. The
maximum number of failed commands required to take a device offline can
be tweaked in sysfs.

Also add a new error flag to scsi_debug which allows this scenario to be
easily reproduced.

[jejb: fix up integer parsing to use kstrtouint]
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 10:14:52 -06:00
Paolo Bonzini
4fe74b1cb0 [SCSI] virtio-scsi: SCSI driver for QEMU based virtual machines
The virtio-scsi HBA is the basis of an alternative storage stack
for QEMU-based virtual machines (including KVM).  Compared to
virtio-blk it is more scalable, because it supports many LUNs
on a single PCI slot), more powerful (it more easily supports
passthrough of host devices to the guest) and more easily
extensible (new SCSI features implemented by QEMU should not
require updating the driver in the guest).

Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 09:50:20 -06:00
Vikas Chaudhary
ac20c7bf07 [SCSI] iscsi_transport: Added Ping support
Added ping support for iscsi adapter, application can use this
interface for diagnostic network connection.

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 09:34:50 -06:00
Vikas Chaudhary
a11e254595 [SCSI] scsi_transport_iscsi: added support for host event
Added support to post kernel host event to application using
netlink interface.

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 09:33:32 -06:00
Mike Christie
1304be5fe0 [SCSI] libiscsi_tcp: fix max_r2t manipulation
Problem description from Xi Wang:
A large max_r2t could lead to integer overflow in subsequent call to
iscsi_tcp_r2tpool_alloc(), allocating a smaller buffer than expected
and leading to out-of-bounds write.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 08:09:00 -06:00
Moger, Babu
3384db9eb8 [SCSI] Correctly set the scsi host/msg/status bytes
Resubmitting as my previous post had format issues and did not go llinux-scsi.
This patch changes the function to set_msg_byte, set_host_byte and
set_driver_byte to correctly set the corresponding bytes appropriately.

It will reset the original setting and correctly set it to the new value.  The
previous OR operation does not always set it back to new value. Look at patch
2/2 for an example.

Signed-off-by: Babu Moger <babu.moger@netapp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 08:08:59 -06:00
Neerav Parikh
d78c317f6c [SCSI] libfc: Add support for FDMI
This patch adds support for Fabric Device Management
Interface as per FC-GS-4 spec. in libfc. Any driver
making use of libfc can enable fdmi state machine
for a given lport.

If lport has enabled FDMI support the lport state
machine will transition into FDMI after completing
the DNS states and before entering the SCR state.
The FDMI state transition is such that if there is an
error, it won't stop the lport state machine from
transitioning and the it will behave as if there was
no FDMI support.

The FDMI HBA attributes are registed with the Management
server via Register HBA (RHBA) command and the port
attributes are reigstered using the Register Port(RPA)
command.

Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Acked-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 08:08:58 -06:00
Neerav Parikh
1ea2c1daf4 [SCSI] libfc: Make the libfc Common Transport(CT) code generic
Currently the libfc Common Transport(CT) calls assume that
the CT requests are Name Server specific only. This patch
makes it more flexible to allow more FC-GS services to make
use of these routines.

Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Acked-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 08:08:58 -06:00
Neerav Parikh
a9277e7783 [SCSI] scsi_transport_fc: Getting FC Port Speed in sync with FC-GS
The values for the 4G and 10G speeds are not in sync with
definitions in SM-HBA/FC-GS-x/etc.
This patch brings them in sync to these specifications.

The values are converted to strings when represented via
sysfs attribute, hence that should cover for user space
apps as they may not see any change.

Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Acked-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 08:08:57 -06:00
Neerav Parikh
bb8ef587a7 [SCSI] scsi_transport_fc: Add FDMI host attributes
This adds FC-GS Fabric Device Management Interface
(FDMI) related attributes to fc_host_attr structure.

This is in preparation for allowing FDMI attributes
to be registered via libfc.

Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Acked-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 08:08:57 -06:00
Vikas Chaudhary
aeddde2978 [SCSI] scsi_transport_iscsi: Added support to show port_state and port_speed in sysfs
sysfs patch to view port_state:
    /sys/class/iscsi_host/host*/port_state

sysfs patch to view port_speed:
    /sys/class/iscsi_host/host*/port_speed

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 08:08:54 -06:00
Vikas Chaudhary
3c5c480118 [SCSI] libiscsi: Added support to show targetalias in sysfs
sysfs patch to view target alias:
  /sys/class/iscsi_session/session*/targetalias

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 08:08:54 -06:00
Johan Hedberg
aee9b21803 Bluetooth: mgmt: Move status parameters into the cmd_complete header
Instead of having status paramters part of each individual command
response it's simpler to just have the status as part of the command
complete header. This patch updates the code to follow this convention
and thereby also ensures compliance with the latest mgmt API
specification.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-19 14:04:41 +02:00
Johan Hedberg
3c6b764020 Bluetooth: mgmt: Change ordering of cmd_status paramters
In accordance to the latest mgmt API specification the opcode comes
first and then the status.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-19 14:04:41 +02:00
Andre Guedes
5e0452c00a Bluetooth: Interleaved discovery support
This patch adds interleaved discovery support to MGMT Start
Discovery command.

In case interleaved discovery is not supported (not a dual mode
device), we perform BR/EDR or LE-only discovery according to the
device capabilities.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-19 12:34:55 +02:00
Andre Guedes
343f935bfa Bluetooth: Merge INQUIRY and LE_SCAN discovery states
This patch merges DISCOVERY_INQUIRY and DISCOVERY_LE_SCAN states
into a new state called DISCOVERY_FINDING.

From the discovery perspective, we are pretty much worried about
to know just if we are finding devices than what exactly phase of
"finding devices" (inquiry or LE scan) we are currently running.
Besides, to know if the controller is performing inquiry or LE scan
we should check HCI_INQUIRY or HCI_LE_SCAN bits in hdev flags.

Moreover, merging this two states will simplify the discovery state
machine and will keep interleaved discovery implementation simpler.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-19 12:34:09 +02:00
Andre Guedes
4aab14e550 Bluetooth: Track discovery type
This patch adds to struct discovery_state the field 'type' so that
we can track the discovery type the device is performing.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-19 12:33:49 +02:00
Andre Guedes
f39799f504 Bluetooth: Prepare start_discovery
This patch does some code refactoring in start_discovery function
in order to prepare it for interleaved discovery support.

MGMT_ADDR_* macros were moved to hci_core.h since they are now used
to define discovery type macros.

Discovery type macros were defined according to mgmt-api.txt
specification:

Possible values for the Type parameter are a bit-wise or of the
following bits:

	1	BR/EDR
	2	LE Public
	3	LE Random

By combining these e.g. the following values are possible:

	1	BR/EDR
	6	LE (public & random)
	7	BR/EDR/LE (interleaved discovery)

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-19 12:32:21 +02:00
Linus Torvalds
a18d3afefa Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: sha512 - use standard ror64()
2012-02-18 15:24:05 -08:00
Russell King
3323761677 MFD: ucb1x00-core: add wakeup support
Add genirq wakeup support for the ucb1x00 device.  This allows an
attached gpio_keys driver to wakeup the system.  Touchscreen is also
possible.

When there are no wakeup sources, ask the platform to assert the reset
signal to avoid any unexpected behaviour; this also puts the reset
signal at the right level when power is removed from the device.

Acked-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-18 23:15:43 +00:00
Russell King
a3364409c4 MFD: ucb1x00: convert to use genirq
Convert the ucb1x00 driver to use genirq's interrupt services, rather
than its own private implementation.  This allows a wider range of
drivers to use the GPIO interrupts (such as the gpio_keys driver)
without being aware of the UCB1x00's private IRQ system.

This prevents the UCB1x00 core driver from being built as a module,
so adjust the configuration to add that restriction.

Acked-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-18 23:15:43 +00:00
Russell King
cf4abfcc0d MFD: mcp-core: remove legacy driver suspend/resume methods
The legacy driver suspend/resume methods are no longer used, so get rid
of them.

Acked-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-18 23:15:42 +00:00
Russell King
5a09b7120a MFD: ucb1x00-core: convert to use dev_pm_ops
Convert the ucb1x00-core driver to use dev_pm_ops rather than the legacy
members in the mcp driver.

Acked-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-18 23:15:42 +00:00
Russell King
cae154767a MFD: ucb1x00-core: use mutexes instead of semaphores
Convert the ucb1x00 driver to use mutexes rather than the depreciated
semaphores for exclusive access to the ADC.

Acked-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-18 23:15:32 +00:00
Russell King
2f7510c607 MFD: ucb1x00-core: add handling for ucb1x00 reset
Provide a way to handle the software controlled ucb1x00 reset signal
from the ucb1x00-core driver without having to code platform specifics
into these drivers.

Acked-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-18 23:15:32 +00:00
Russell King
abe06082d0 MFD: mcp/ucb1x00: separate ucb1x00 driver data from the MCP data
Patch taken from 5dd7bf59e0 (ARM: sa11x0: Implement autoloading of codec
and codec pdata for mcp bus.) by Jochen Friedrich <jochen@scram.de>.

This adds just the codec data part of the patch.

Acked-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-18 23:15:30 +00:00
Alex Shi
8028dcea8a slub: per cpu partial statistics change
This patch split the cpu_partial_free into 2 parts: cpu_partial_node, PCP refilling
times from node partial; and same name cpu_partial_free, PCP refilling times in
slab_free slow path. A new statistic 'cpu_partial_drain' is added to get PCP
drain to node partial times. These info are useful when do PCP tunning.

The slabinfo.c code is unchanged, since cpu_partial_node is not on slow path.

Signed-off-by: Alex Shi <alex.shi@intel.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-02-18 11:00:09 +02:00
Benny Halevy
d24433cdc9 nfsd41: implement NFS4_SHARE_WANT_NO_DELEG, NFS4_OPEN_DELEGATE_NONE_EXT, why_no_deleg
Respect client request for not getting a delegation in NFSv4.1
Appropriately return delegation "type" NFS4_OPEN_DELEGATE_NONE_EXT
and WND4_NOT_WANTED reason.

[nfsd41: add missing break when encoding op_why_no_deleg]
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-02-17 18:38:53 -05:00
Tom Tucker
cec56c8ff5 svcrdma: Cleanup sparse warnings in the svcrdma module
The svcrdma transport was un-marshalling requests in-place. This resulted
in sparse warnings due to __beXX data containing both NBO and HBO data.

The code has been restructured to do byte-swapping as the header is
parsed instead of when the header is validated immediately after receipt.

Also moved extern declarations for the workqueue and memory pools to the
private header file.

Signed-off-by: Tom Tucker <tom@ogc.us>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-02-17 18:38:50 -05:00
Mark Brown
9cde5fcd43 regmap: Add stub regmap calls as a build crutch for infrastructure users
Make life easier for subsystems which build infrastructure on top of the
regmap API by providing stub definitions for most of the API so that users
can at least build even if the regmap API is not enabled without having to
add ifdefs if they don't want to.

These stubs are not expected to be useful and should never actually get
called, they just exist so that we can link so there are WARN_ONCE()s in
the stubs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-17 14:51:15 -08:00
Rafael J. Wysocki
c48825251c PM: Add comment describing relationships between PM callbacks to pm.h
The UNIVERSAL_DEV_PM_OPS() macro is slightly misleading, because it
may suggest that it's a good idea to point runtime PM callback
pointers to the same routines as system suspend/resume callbacks
.suspend() and .resume(), which is not the case.  For this reason,
add a comment to include/linux/pm.h, next to the definition of
UNIVERSAL_DEV_PM_OPS(), describing how device PM callbacks are
related to each other.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-02-17 23:36:30 +01:00
Rafael J. Wysocki
bc25cf5089 PM / Sleep: Drop suspend_stats_update()
Since suspend_stats_update() is only called from pm_suspend(),
move its code directly into that function and remove the static
inline definition from include/linux/suspend.h.  Clean_up
pm_suspend() in the process.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
2012-02-17 23:36:23 +01:00
Weston Andros Adamson
0a70219523 NFS: include filelayout DS rpc stats in mountstats
Include RPC statistics from all data servers in /proc/self/mountstats for pNFS
filelayout mounts.

Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-02-17 13:39:47 -05:00
Mark Brown
888df395eb ASoC: dapm: Implement and instantiate DAI widgets
In order to allow us to do smarter things with DAI links create DAPM
widgets which directly represent the DAIs in the DAPM graph. These are
automatically created from the DAIs as we probe the card with references
held in both directions between the widget and the DAI.

The widgets are not made available for direct instantiation by drivers,
they are created automatically from the DAIs.  Drivers should be updated
to create stream routes using DAPM maps rather than by annotating AIF
and DAC widgets with streams.

In order to ease transition to this model from existing drivers we
automatically create DAPM routes between the DAI widgets and the existing
stream widgets which are started and stopped by the DAI widgets, though
the old stream handling mechanism is still in place.  This also has the
nice effect of removing non-DAPM devices as any device with a DAI
acquires a widget automatically which will allow future simplifications
to the core DAPM logic.

The intention is that in future the AIF and DAI widgets will gain the
ability to interact such that we are able to manage activity on
individual channels independantly rather than powering up and down the
entire AIF as we do currently.

Currently we only generate these for CODECs, mostly as I have no systems
with non-CODEC DAPM to integrate with. It should be a simple matter of
programming to add the additional hookup for these.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2012-02-17 08:10:10 -08:00
Mark Brown
3056557f3b ASoC: dapm: Constify lots of names that are never modified
Neater and avoids warnings when used in other places where const strings
are desired.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2012-02-17 08:10:06 -08:00
Mark Brown
7bd3a6f34c ASoC: dapm: Supply the DAI and substream when calling stream events
In order to allow us to do something smarter than iterate through widgets
doing strcmp() to work out what to power up for stream events change the
interface used to generate them to be based on the combination of a DAI
and a stream direction rather than just a simple string identifying the
stream.

At some point we'll probably want a set of channels too.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2012-02-17 08:10:01 -08:00
Mark Brown
ce0e9f0ede ASoC: dapm: Unexport snd_soc_dapm_new_control()
Everything now uses snd_soc_dapm_new_controls() instead so we don't need
to make it part of the external API.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2012-02-17 08:09:52 -08:00
Mark Brown
5ac2ba9452 ALSA: core: Constify the name in new kcontrols
We never modify it and this lets us use a const string as the name without
warnings.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Liam Girdwood <lrg@ti.com>
2012-02-17 08:09:48 -08:00
Johan Hedberg
ea585ab51d Bluetooth: Add Intel copyright to mgmt files
This patch adds the appropriate Intel copyright to mgmt files.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-17 15:35:39 +02:00
Johan Hedberg
a198e7b100 Bluetooth: mgmt: Add address type to confirm name command
The latest mgmt API includes an address type for all messages containing
an address. This patch updates the confirm name command to match this.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-17 14:39:16 +02:00
Johan Hedberg
d8457698e7 Bluetooth: mgmt: Add address type to PIN code messages
The latest mgmt API includes address types for all messages containing
an address. This patch updates the PIN code messages to match this.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-17 14:39:16 +02:00
Johan Hedberg
d753fdc40f Bluetooth: mgmt: Add address type to link key messages
The latest mgmt API includes an address type wherever there's an address
present. This patch updates the link key messages to match it.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-17 14:39:16 +02:00
Ingo Molnar
09bda4432a Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core 2012-02-17 12:55:07 +01:00
Andrei Emeltchenko
e05dcc3291 Bluetooth: Use symbolic names for state in debug
Use state_to_string function in debug statements.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-17 13:01:54 +02:00
Andrei Emeltchenko
20d1803a70 Bluetooth: Move scope of state_to_string
Function state_to_string will be used in other files in debug
statements.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-17 13:01:10 +02:00
Joe Perches
3ed7003e72 Bluetooth: Add logging functions bt_info and bt_err
Use specific logging functions instead of a generic
bt_printk function can save some text.

Remove now unused bt_printk function.
Add compatibility BT_INFO and BT_ERR macros.

(compiled x86 and defconfig with bluetooth and all bluetooth drivers)

$ size net/bluetooth/built-in.o*
   text	   data	    bss	    dec	    hex	filename
 381662	  20072	 100416	 502150	  7a986	net/bluetooth/built-in.o.allyesconfig.new
 382463	  20072	 100400	 502935	  7ac97	net/bluetooth/built-in.o.allyesconfig.old
 126635	   1388	    132	 128155	  1f49b	net/bluetooth/built-in.o.defconfig.new
 127175	   1388	    132	 128695	  1f6b7	net/bluetooth/built-in.o.defconfig.old

$ size drivers/bluetooth/built-in.o*
 127575	   8976	  29476	 166027	  2888b	drivers/bluetooth/built-in.o.allyesconfig.new
 129512	   8976	  29516	 168004	  29044	drivers/bluetooth/built-in.o.allyesconfig.old
  52998	   3292	    156	  56446	   dc7e	drivers/bluetooth/built-in.o.defconfig.new
  54358	   3292	    156	  57806	   e1ce	drivers/bluetooth/built-in.o.defconfig.old

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-17 11:33:17 +02:00
Johan Hedberg
ed2c4ee360 Bluetooth: mgmt: Add support for Set SSP command
The Set SSP mgmt command can be used for enabling and disabling Secure
Simple Pairing support for controllers that support it.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-17 11:27:11 +02:00
Johan Hedberg
33ef95ed30 Bluetooth: mgmt: Add support for Set Link Security command
The Set Link Security mgmt command is used to enable or disable link
level security, also known as Security Mode 3. This is rarely enabled in
modern systems but the command needs to be available for completeness,
qualification purposes and those few systems that actually want to
enable it.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-17 11:27:11 +02:00
Ingo Molnar
7b2d81d48a uprobes/core: Clean up, refactor and improve the code
Make the uprobes code readable to me:

 - improve the Kconfig text so that a mere mortal gets some idea
   what CONFIG_UPROBES=y is really about

 - do trivial renames to standardize around the uprobes_*() namespace

 - clean up and simplify various code flow details

 - separate basic blocks of functionality

 - line break artifact and white space related removal

 - use standard local varible definition blocks

 - use vertical spacing to make things more readable

 - remove unnecessary volatile

 - restructure comment blocks to make them more uniform and
   more readable in general

Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Link: http://lkml.kernel.org/n/tip-ewbwhb8o6navvllsauu7k07p@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-17 10:18:07 +01:00