Commit graph

79,519 commits

Author SHA1 Message Date
Fan Du
8d549c4f5d xfrm: Using the right namespace to migrate key info
because the home agent could surely be run on a different
net namespace other than init_net. The original behavior
could lead into inconsistent of key info.

Signed-off-by: Fan Du <fan.du@windriver.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-12-06 06:45:05 +01:00
Linus Torvalds
002acf1fc1 Power management fixes for 3.13-rc3
- cpufreq regression fix from Bjørn Mork restoring the pre-3.12
    behavior of the framework during system suspend/hibernation to
    avoid garbage sysfs files from being left behind in case of a
    suspend error.
 
  - PNP regression fix to restore the correct states of devices after
    resume from hibernation broken in 3.12.  From Dmitry Torokhov.
 
  - cpuidle fix to prevent cpuidle device unregistration from crashing
    due to a NULL pointer dereference if cpuidle has been disabled
    from the kernel command line.  From Konrad Rzeszutek Wilk.
 
  - intel_idle fix for the C6 state definition on Intel Avoton/Rangeley
    processors from Arne Bockholdt.
 
  - Power capping framework fix to make the energy_uj sysfs attribute
    work in accordance with the documentation.  From Srinivas Pandruvada.
 
  - epoll fix to make it ignore the EPOLLWAKEUP flag if the kernel has
    been compiled with CONFIG_PM_SLEEP unset (in which case that flag
    should not have any effect).  From Amit Pundir.
 
  - cpufreq fix to prevent governor sysfs files from being lost over
    system suspend/resume in some (arguably unusual) situations.  From
    Viresh Kumar.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABCAAGBQJSoTE5AAoJEILEb/54YlRxh/sP/jFZhLTc8g4MC3XzhguuROzT
 u0Pu9VJVfACqz8LyiCOtfOvvb2EPV7VSq7qYqszL5y9Dn5gwIHvQMMBK2PjZ4cc2
 MtSiw02Bk/DEESXYOjt++n5ja/0lc05CtJTlb3uoJXBOCqp3cMrvW7+QqnLbEfbG
 S+TcPFBr+4Owt/J7r2Z2JBYGZ6NbVol/x1hAFjiM+rBan6UGw7uNcg2LgQrVHcs4
 S1Cm6lsJTwRcSiswvJv9/C+ML9Z/1gYYUyu7ijQnGdbNUolyzHY6AxLWZdnSkAQO
 s8JVDRKy9+V44LtnWSENnJNftjlOoXWcZRJxvDePyM3dVpxESBa8Z/AxYWwCcmcB
 e4rsgm/WOF86DMhRu+gfeTF+1OkU7KhuPhbXskbw+JDcZKCui2FP/xti6IAaTsU/
 9M30/VeOpD1UBqckLnDTGcsFif7hVZ9LOHH5wK8OctjyaTMfUYtPd7WxfTQCpcSc
 1M0NQapwfXHASmPmMW4SszAaeduecUdgXU1epOPx0EpOMQhvuLeENJBgVC5uu1cA
 KAQ7suOx9ReS3slso8lpTlTEw2rsDPRuiHcF3hv7YpklNXV2jvtxsl4upHT5VN2t
 3L59Unq8vY2lt3SdzWMypaAquphc3Te5woYoFwgsSPfw40Kr+jg+oUtO6IHqM/ga
 OATUkTffzp+Rp3pg036Y
 =gHBV
 -----END PGP SIGNATURE-----

Merge tag 'pm-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:

 - cpufreq regression fix from Bjørn Mork restoring the pre-3.12
   behavior of the framework during system suspend/hibernation to avoid
   garbage sysfs files from being left behind in case of a suspend error

 - PNP regression fix to restore the correct states of devices after
   resume from hibernation broken in 3.12.  From Dmitry Torokhov.

 - cpuidle fix to prevent cpuidle device unregistration from crashing
   due to a NULL pointer dereference if cpuidle has been disabled from
   the kernel command line.  From Konrad Rzeszutek Wilk.

 - intel_idle fix for the C6 state definition on Intel Avoton/Rangeley
   processors from Arne Bockholdt.

 - Power capping framework fix to make the energy_uj sysfs attribute
   work in accordance with the documentation.  From Srinivas Pandruvada.

 - epoll fix to make it ignore the EPOLLWAKEUP flag if the kernel has
   been compiled with CONFIG_PM_SLEEP unset (in which case that flag
   should not have any effect).  From Amit Pundir.

 - cpufreq fix to prevent governor sysfs files from being lost over
   system suspend/resume in some (arguably unusual) situations.  From
   Viresh Kumar.

* tag 'pm-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PowerCap: Fix mode for energy counter
  PNP: fix restoring devices after hibernation
  cpuidle: Check for dev before deregistering it.
  epoll: drop EPOLLWAKEUP if PM_SLEEP is disabled
  cpufreq: fix garbage kobjects on errors during suspend/resume
  cpufreq: suspend governors on system suspend/hibernate
  intel_idle: Fixed C6 state on Avoton/Rangeley processors
2013-12-05 18:26:40 -08:00
Eric W. Biederman
7f2cbdc28c tcp_memcontrol: Cleanup/fix cg_proto->memory_pressure handling.
kill memcg_tcp_enter_memory_pressure.  The only function of
memcg_tcp_enter_memory_pressure was to reduce deal with the
unnecessary abstraction that was tcp_memcontrol.  Now that struct
tcp_memcontrol is gone remove this unnecessary function, the
unnecessary function pointer, and modify sk_enter_memory_pressure to
set this field directly, just as sk_leave_memory_pressure cleas this
field directly.

This fixes a small bug I intruduced when killing struct tcp_memcontrol
that caused memcg_tcp_enter_memory_pressure to never be called and
thus failed to ever set cg_proto->memory_pressure.

Remove the cg_proto enter_memory_pressure function as it now serves
no useful purpose.

Don't test cg_proto->memory_presser in sk_leave_memory_pressure before
clearing it.  The test was originally there to ensure that the pointer
was non-NULL.  Now that cg_proto is not a pointer the pointer does not
matter.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05 21:01:01 -05:00
Paul Durrant
1431fb31ec xen-netback: fix fragment detection in checksum setup
The code to detect fragments in checksum_setup() was missing for IPv4 and
too eager for IPv6. (It transpires that Windows seems to send IPv6 packets
with a fragment header even if they are not a fragment - i.e. offset is zero,
and M bit is not set).

This patch also incorporates a fix to callers of maybe_pull_tail() where
skb->network_header was being erroneously added to the length argument.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: David Vrabel <david.vrabel@citrix.com>
cc: David Miller <davem@davemloft.net>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05 20:31:40 -05:00
Rafael J. Wysocki
8e7030097e Merge branches 'pm-epoll', 'pnp' and 'powercap'
* pm-epoll:
  epoll: drop EPOLLWAKEUP if PM_SLEEP is disabled

* pnp:
  PNP: fix restoring devices after hibernation

* powercap:
  PowerCap: Fix mode for energy counter
2013-12-06 02:18:28 +01:00
Rafael J. Wysocki
7cdcec991c Merge branches 'pm-cpuidle' and 'pm-cpufreq'
* pm-cpuidle:
  cpuidle: Check for dev before deregistering it.
  intel_idle: Fixed C6 state on Avoton/Rangeley processors

* pm-cpufreq:
  cpufreq: fix garbage kobjects on errors during suspend/resume
  cpufreq: suspend governors on system suspend/hibernate
2013-12-06 02:17:59 +01:00
David S. Miller
426e1fa31e Merge branch 'siocghwtstamp' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next
Ben Hutchings says:

====================
SIOCGHWTSTAMP ioctl

1. Add the SIOCGHWTSTAMP ioctl and update the timestamping
documentation.
2. Implement SIOCGHWTSTAMP in most drivers that support SIOCSHWTSTAMP.
3. Add a test program to exercise SIOC{G,S}HWTSTAMP.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05 19:45:14 -05:00
Linus Torvalds
29be6345bb NFS client bugfixes
- Stable fix for a NFSv4.1 delegation and state recovery deadlock
 - Stable fix for a loop on irrecoverable errors when returning delegations
 - Fix a 3-way deadlock between layoutreturn, open, and state recovery
 - Update the MAINTAINERS file with contact information for Trond Myklebust
 - Close needs to handle NFS4ERR_ADMIN_REVOKED
 - Enabling v4.2 should not recompile nfsd and lockd
 - Fix a couple of compile warnings
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJSoLTpAAoJEGcL54qWCgDy2dgQAIKkKAXccg3OG2b1SxJmiaja
 PcrovNmgg3HvYQ7clUMqtrMByiXEpSybl6tAeXYUWE3sS1DISSBVEwO3MoOiASiM
 951Ssx+CoyhsHYo5aH83sUIiWFl/YsRhpKmSr2cdQd13DQTFbPq896k64Inf6L2/
 9fngoqOD7FunQHn8AiVPoDOQzObB0OuKhYCwuwLt47oPiwgmm12JQNCDxU1i4sxb
 lkGUBLkPMs6D5IyI8XHaMyX3+8MvmPiIsjIKaNJRdhkuX/k7ollucTJXyvyEQKK0
 PhBIWyUULmKcAXYwCfHf9UoyGZFvmj47YggyKcBd26OZUEFekcWrULfym46F1xak
 EcO6D4mlTy5i5W0RBqYCj1oGud57rixZBmhLTbeq6sSJaiqBfGEs225Q17H7rsEB
 YIghHiEFNnBmVWELhHxbJHQoY6HOugmZOuc0dxopaikN/7to8gnYoVyTIVlMfe/t
 UNXZoer6GOOohJGtZ7s7v4Al7EzvwnVnBCBklEAKFJ7Ca2LEmq+b58oQW3nJ1mPn
 y4TnihxYXsSEbqy+Lds9rumRhJLG1oVTpwficAm7N3HdK3abzCIPEt6iOHoCmXQz
 J1B4gmwOKsDqVlCSpBsnc3ZiBlSJGOn6MmVQUCNFpzv/DetWn/BxEUPE8cNm8DaI
 WioD0grC0/9bR8oD1m+w
 =UZ51
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-3.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
 - Stable fix for a NFSv4.1 delegation and state recovery deadlock
 - Stable fix for a loop on irrecoverable errors when returning
   delegations
 - Fix a 3-way deadlock between layoutreturn, open, and state recovery
 - Update the MAINTAINERS file with contact information for Trond
   Myklebust
 - Close needs to handle NFS4ERR_ADMIN_REVOKED
 - Enabling v4.2 should not recompile nfsd and lockd
 - Fix a couple of compile warnings

* tag 'nfs-for-3.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  nfs: fix do_div() warning by instead using sector_div()
  MAINTAINERS: Update contact information for Trond Myklebust
  NFSv4.1: Prevent a 3-way deadlock between layoutreturn, open and state recovery
  SUNRPC: do not fail gss proc NULL calls with EACCES
  NFSv4: close needs to handle NFS4ERR_ADMIN_REVOKED
  NFSv4: Update list of irrecoverable errors on DELEGRETURN
  NFSv4 wait on recovery for async session errors
  NFS: Fix a warning in nfs_setsecurity
  NFS: Enabling v4.2 should not recompile nfsd and lockd
2013-12-05 13:05:48 -08:00
Ping Cheng
3b5a7ab40c Input: add SW_MUTE_DEVICE switch definition
Some devices, such as new Intuos series tablets, have a hardware switch to
turn touch data on/off. To report the state, SW_MUTE_DEVICE is added
in include/uapi/linux/input.h.

Reviewed_by: Chris Bagwell <chris@cnpbagwell.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-05 12:49:37 -08:00
Tejun Heo
b1a0fbfdde percpu: fix spurious sparse warnings from DEFINE_PER_CPU()
When CONFIG_DEBUG_FORCE_WEAK_PER_CPU or CONFIG_ARCH_NEEDS_WEAK_PER_CPU
is set, DEFINE_PER_CPU() explodes into cryptic series of definitions
to still allow using "static" for percpu variables while keeping all
per-cpu symbols unique in the kernel image which is required for weak
symbols.  This ultimately converts the actual symbol to global whether
DEFINE_PER_CPU() is prefixed with static or not.

Unfortunately, the macro forgot to add explicit extern declartion of
the actual symbol ending up defining global symbol without preceding
declaration for static definitions which naturally don't have matching
DECLARE_PER_CPU().  The only ill effect is triggering of the following
warnings.

 fs/inode.c:74:8: warning: symbol 'nr_inodes' was not declared. Should it be static?
 fs/inode.c:75:8: warning: symbol 'nr_unused' was not declared. Should it be static?

Fix it by adding extern declaration in the DEFINE_PER_CPU() macro.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
2013-12-05 12:59:23 -05:00
Linus Torvalds
09759d1e13 sound fixes for 3.13-rc3
A usual pattern of half ASoC and half HD-audio fixes, although
 HD-audio fixups have more volumes, in addition to a couple of
 trivial fixes.  Nothing to worry much is found here.
 
 For ASoC side: a few fixes for PCM rate constraints calculations,
 regmap byte-order fix, the rest driver specific fixes (atmel, fsl,
 omap, kirkwood, wm codecs).
 
 For HD-audio: Dell headset and mono out fix, ELD update in polling
 mode, ALC283 Chromebook fixes, a few fixes for old AD codecs and
 MBA2,1 regression fix.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJSoB+JAAoJEGwxgFQ9KSmk1FwQAJYtEq5eiKd43yF+yQAvuLZD
 W9RzMdhj+avXOaqNym8Dw0c3cAtr/udQDxgyiq8J0M12avDlXaPU/7uLz2dV2Mj2
 PQ6kTQCMSH58ypSjMQccBylH2n7UPZ2+IveSy6UzPsdSwEFghHsafwd/Apr7cQFU
 AOjEz9aZmT0xO2t8DW/v67ZmqKqP6gmwzbpAfMhfpHTJPjutlXrXM9Fqy2hBC5Nm
 Nu//JagPbCVSQg+tDROdhSqHnWORheQq6atsolx5IWBcUGywLKNLHyQEpv/Qi0eN
 1qkb6xg0VnlY0NmUSANVnxg5pxxN5kYWz6kyFVAwDXcJLNmjhQk9Yk3BtjGaaqz8
 UBz+aQQU3n+zxAbDYaRkYr1Yp/naMeDP6Yq9YcoYE3PGe8PHkQh1fnc1CvTrofpM
 w8Jq3tPIfd/L6aRNUAWmGMN5N1U8p5d/MfKFxEcPghgmR3WvQjgj6RpIAkLmboS4
 d6vLkBydXVXR10xJbktm5JcqBbYUMu5Wxt4UGDgmxP9SOp3cMKf7BbdIWiaLnrPg
 nLLIRMu3mqFscUgHjD1x55Nus3zJ3I//JUtnK+UvdBZoZMt8qFwzkF5S5eustH5i
 SiBrEMnYuN1zgQ6R+EKQEyTWyz0PJ7rS7JdAZQTEIK3TIiK5csBr4B1H9SQ36axn
 pT+rswGMos8CmG1zur0X
 =LEyN
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A usual pattern of half ASoC and half HD-audio fixes, although
  HD-audio fixups have more volumes, in addition to a couple of trivial
  fixes.  Nothing to worry much is found here.

  For ASoC side: a few fixes for PCM rate constraints calculations,
  regmap byte-order fix, the rest driver specific fixes (atmel, fsl,
  omap, kirkwood, wm codecs).

  For HD-audio: Dell headset and mono out fix, ELD update in polling
  mode, ALC283 Chromebook fixes, a few fixes for old AD codecs and
  MBA2, one regression fix"

* tag 'sound-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
  ALSA: hda - Fix silent output on MacBook Air 2,1
  ALSA: hda - Fix missing ELD info when using jackpoll_ms parameter
  ALSA: hda/realtek - remove hp_automute_hook from alc283_fixup_chromebook
  ASoC: wm8731: fix dsp mode configuration
  ALSA: hda/realtek - Independent of model for HP
  ALSA: hda - Fix headset mic input after muted internal mic (Dell/Realtek)
  ALSA: hda - Use always amps for auto-mute on AD1986A codec
  ALSA: hda/analog - Handle inverted EAPD properly in vmaster hook
  ALSA: hda - Another fixup for ASUS laptop with ALC660 codec
  ALSA: atmel: Fix possible array overflow
  ALSA: hda - Fix complete_all() timing in deferred probes
  ALSA: hda - Fix bad EAPD setup for HP machines with AD1984A
  ASoC: core: fix devres parameter in devm_snd_soc_register_card()
  ASoC: omap: n810: Convert to clk_prepare_enable/clk_disable_unprepare
  ASoC: fsl: set correct platform drvdata in pcm030_fabric_probe()
  ASoC: fsl: imx-pcm-fiq: Remove unused 'runtime' variable
  ASoC: fsl: imx-pcm-fiq: remove bogus period delta calculation
  ALSA: hda - Fix silent output on ASUS W7J laptop
  ASoC: core: Use consistent byte ordering in snd_soc_bytes_get
  ALSA: dice: fix array limits in dice_proc_read()
  ...
2013-12-05 09:54:35 -08:00
Tejun Heo
6612f05b88 cgroup: unify pidlist and other file handling
In preparation of conversion to kernfs, cgroup file handling is
updated so that it can be easily mapped to kernfs.  With the previous
changes, the difference between pidlist and other files are very
small.  Both are served by seq_file in a pretty standard way with the
only difference being !pidlist files use single_open().

This patch adds cftype->seq_start(), ->seq_next and ->seq_stop() and
implements the matching cgroup_seqfile_start/next/stop() which either
emulates single_open() behavior or invokes cftype->seq_*() operations
if specified.  This allows using single seq_operations for both
pidlist and other files and makes cgroup_pidlist_operations and
cgorup_pidlist_open() no longer necessary.  As cgroup_pidlist_open()
was the only user of cftype->open(), the method is dropped together.

This brings cftype file interface very close to kernfs interface and
mapping shouldn't be too difficult.  Once converted to kernfs, most of
the plumbing code including cgroup_seqfile_*() will be removed as
kernfs provides those facilities.

This patch does not introduce any behavior changes.

v2: Refreshed on top of the updated "cgroup: introduce struct
    cgroup_pidlist_open_file".

v3: Refreshed on top of the updated "cgroup: attach cgroup_open_file
    to all cgroup files".

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
2013-12-05 12:28:04 -05:00
Tejun Heo
2da8ca822d cgroup: replace cftype->read_seq_string() with cftype->seq_show()
In preparation of conversion to kernfs, cgroup file handling is
updated so that it can be easily mapped to kernfs.  This patch
replaces cftype->read_seq_string() with cftype->seq_show() which is
not limited to single_open() operation and will map directcly to
kernfs seq_file interface.

The conversions are mechanical.  As ->seq_show() doesn't have @css and
@cft, the functions which make use of them are converted to use
seq_css() and seq_cft() respectively.  In several occassions, e.f. if
it has seq_string in its name, the function name is updated to fit the
new method better.

This patch does not introduce any behavior changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
2013-12-05 12:28:04 -05:00
Tejun Heo
7da1127927 cgroup: attach cgroup_open_file to all cgroup files
In preparation of conversion to kernfs, cgroup file handling is
updated so that it can be easily mapped to kernfs.  This patch
attaches cgroup_open_file, which used to be attached to pidlist files,
to all cgroup files, introduces seq_css/cft() accessors to determine
the cgroup_subsys_state and cftype associated with a given cgroup
seq_file, exports them as public interface.

This doesn't cause any behavior changes but unifies cgroup file
handling across different file types and will help converting them to
kernfs seq_show() interface.

v2: Li pointed out that the original patch was using
    single_open_size() incorrectly assuming that the size param is
    private data size.  Fix it by allocating @of separately and
    passing it to single_open() and explicitly freeing it in the
    release path.  This isn't the prettiest but this path is gonna be
    restructured by the following patches pretty soon.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
2013-12-05 12:28:04 -05:00
Tejun Heo
6e0755b08d cgroup: remove cftype->read(), ->read_map() and ->write()
In preparation of conversion to kernfs, cgroup file handling is being
consolidated so that it can be easily mapped to the seq_file based
interface of kernfs.

After recent updates, ->read() and ->read_map() don't have any user
left and ->write() never had any user.  Remove them.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
2013-12-05 12:28:03 -05:00
Janusz Dziedzic
d1e33e654e cfg80211: in bitrate_mask, rename mcs to ht_mcs
Rename NL80211_TXRATE_MCS to NL80211_TXRATE_HT and also
rename mcs to ht_mcs in struct cfg80211_bitrate_mask.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
[reword commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-05 16:39:07 +01:00
Johan Hedberg
0ce43ce60d Bluetooth: Simplify l2cap_chan initialization for LE CoC
The values in l2cap_chan that are used for actually transmitting data
only need to be initialized right after we've received an L2CAP Connect
Request or just before we send one. The only thing that we need to
initialize though bind() and connect() is the chan->mode value. This way
all other initializations can be done in the l2cap_le_flowctl_init
function (which now becomes private to l2cap_core.c) and the
l2cap_le_flowctl_start function can be completely removed.

Also, since the l2cap_sock_init function initializes the imtu and omtu
to adequate values these do not need to be part of l2cap_le_flowctl_init.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05 07:05:36 -08:00
Johan Hedberg
e77af75592 Bluetooth: Fix CID ranges for LE CoC CID allocations
LE CoC used differend CIC ranges than BR/EDR L2CAP. The start of the
range is the same (0x0040) but the range ends at 0x007f (unlike BR/EDR
where it goes all the way to 0xffff).

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05 07:05:36 -08:00
Johan Hedberg
595177f311 Bluetooth: Fix LE L2CAP Connect Request handling together with SMP
Unlike BR/EDR, for LE when we're in the BT_CONNECT state we may or may
not have already have sent the Connect Request. This means that we need
some extra tracking of the request. This patch adds an extra channel
flag to prevent the request from being sent a second time.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05 07:05:35 -08:00
Johan Hedberg
837776f790 Bluetooth: Introduce L2CAP channel callback for suspending
Setting the BT_SK_SUSPEND socket flag from the L2CAP core is causing a
dependency on the socket. So instead of doing that, use a channel
callback into the socket handling to suspend.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05 07:05:35 -08:00
Johan Hedberg
1f435424ce Bluetooth: Add new BT_SNDMTU and BT_RCVMTU socket options
This patch adds new socket options for LE sockets since the existing
L2CAP_OPTIONS socket option is not usable for LE. For now, the new
socket options also require LE CoC support to be explicitly enabled to
leave some playroom in case something needs to be changed in a backwards
incompatible way.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05 07:05:34 -08:00
Johan Hedberg
0cd75f7ed7 Bluetooth: Track LE L2CAP credits in l2cap_chan
This patch adds tracking of L2CAP connection oriented channel local and
remote credits to struct l2cap_chan and ensures that connect requests
and responses contain the right values.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05 07:05:34 -08:00
Johan Hedberg
3831971355 Bluetooth: Add LE L2CAP flow control mode
The LE connection oriented channels have their own mode with its own
data transfer rules. In order to implement this properly we need to
distinguish L2CAP channels operating in this mode from other modes.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05 07:05:34 -08:00
Johan Hedberg
27e2d4c8d2 Bluetooth: Add basic LE L2CAP connect request receiving support
This patch adds the necessary boiler plate code to handle receiving
L2CAP connect requests over LE and respond to them with a proper connect
response.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05 07:05:33 -08:00
Johan Hedberg
ee5ec5cf00 Bluetooth: Add definitions for LE connection oriented channels
This patch adds the necessary defines and structs for LE connection
oriented channels.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05 07:05:32 -08:00
Johan Hedberg
9149761ad7 Bluetooth: Add module parameter to enable LE CoC support
Along with the L2CAP Connection Oriented Channels features it is now
allowed to use both custom fixed CIDs as well as PSM based (connection
oriented connections). Since the support for this (with the subsequent
patches) is still on an experimental stage, add a module parameter to
enable it.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05 07:05:32 -08:00
Cesar Eduardo Barros
fe8c8a1268 crypto: more robust crypto_memneq
Disabling compiler optimizations can be fragile, since a new
optimization could be added to -O0 or -Os that breaks the assumptions
the code is making.

Instead of disabling compiler optimizations, use a dummy inline assembly
(based on RELOC_HIDE) to block the problematic kinds of optimization,
while still allowing other optimizations to be applied to the code.

The dummy inline assembly is added after every OR, and has the
accumulator variable as its input and output. The compiler is forced to
assume that the dummy inline assembly could both depend on the
accumulator variable and change the accumulator variable, so it is
forced to compute the value correctly before the inline assembly, and
cannot assume anything about its value after the inline assembly.

This change should be enough to make crypto_memneq work correctly (with
data-independent timing) even if it is inlined at its call sites. That
can be done later in a followup patch.

Compile-tested on x86_64.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.eti.br>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-12-05 21:28:41 +08:00
Tom Lendacky
63b945091a crypto: ccp - CCP device driver and interface support
These routines provide the device driver support for the AMD
Cryptographic Coprocessor (CCP).

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-12-05 21:28:37 +08:00
Linus Torvalds
53c6de5026 Merge branch 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 and EFI fixes from Peter Anvin:
 "Half of these are EFI-related:

  The by far biggest change is the change to hold off the deletion of a
  sysfs entry while a backend scan is in progress.  This is to avoid
  calling kmemdup() while under a spinlock.

  The other major change is for each entry in the EFI pstore backend to
  get a unique identifier, as required by the pstore filesystem proper.

  The other changes are:

  A fix to the recent consolidation and optimization of using "asm goto"
  with read-modify-write operation, which broke the bitops; specifically
  in such a way that we could end up generating invalid code.

  A build hack to make sure we compile with -mno-sse.  icc, and most
  likely future versions of gcc, can generate SSE instructions unless we
  tell it not to.

  A comment-only patch to a change the was due in part to an unpublished
  erratum; now when the erratum is published we want to add a comment
  explaining why"

* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic, doc: Justification for disabling IO APIC before Local APIC
  x86, bitops: Correct the assembly constraints to testing bitops
  x86-64, build: Always pass in -mno-sse
  efi-pstore: Make efi-pstore return a unique id
  x86/efi: Fix earlyprintk off-by-one bug
  efivars, efi-pstore: Hold off deletion of sysfs entry until the scan is completed
2013-12-04 21:45:21 -08:00
Olof Johansson
94c5216ee9 AT91: Move to Common Clock Framework and sama5d3 implementation
This is the first step to move AT91 to the CCF.
 - core CCF and drivers for most of the clocks
 - use of CCF for sama5d3 (100% DT-based)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJSnLhVAAoJEAf03oE53VmQugkH/11ZuSaLsjn31/WvE4WwKdgc
 RCIx7r8BCmPLNwDFOgc7tsheH7Jb6I7BNv4MnX8NIPrcAGy6yCEaD8TqhwKGTs9s
 2YGoKB48fpwm1udDc6Hfq3/yqkPvM7AnzE1ei1rJNmLt2582tlX1FI+klQG5EoUK
 23Pf4yjxtxt31s6xjuvRjEVjEat4PWnuVLs0nZWK6mizApXjA1JPIsKS6NL7q+eG
 aBMWDGw0DW4M8VEHAZygxF16PRXnumuB7NAIxKp8SJW5/acSeQntJTNXisMQBem7
 DxWfvK7WAFEBGUcRN33a9RpKaHg0Gur1If2sw6CkZ83RnRV9CLqURty1mO4WCUo=
 =B+yP
 -----END PGP SIGNATURE-----

Merge tag 'at91-cleanup' of git://github.com/at91linux/linux-at91 into next/cleanup

From Nicolas Ferre:
AT91: Move to Common Clock Framework and sama5d3 implementation
This is the first step to move AT91 to the CCF.
- core CCF and drivers for most of the clocks
- use of CCF for sama5d3 (100% DT-based)

* tag 'at91-cleanup' of git://github.com/at91linux/linux-at91: (22 commits)
  ARM: at91/dt: remove old clk material
  ARM: at91: move sama5d3 SoC to common clk
  ARM: at91/dt: define sama5d3xek's main clk frequency
  ARM: at91/dt: define sama5d3 clocks
  ARM: at91: prepare common clk transition for sama5d3 SoC
  ARM: at91: prepare sama5 dt boards transition to common clk
  ARM: at91: add new compatible strings for pmc driver
  ARM: at91: move pit timer to common clk framework
  dt: binding: add at91 clks dt bindings documentation
  clk: at91: add PMC smd clock
  clk: at91: add PMC usb clock
  clk: at91: add PMC utmi clock
  clk: at91: add PMC programmable clocks
  clk: at91: add PMC peripheral clocks
  clk: at91: add PMC system clocks
  clk: at91: add PMC master clock
  clk: at91: add PMC pll clocks
  clk: at91: add PMC main clock
  clk: at91: add PMC macro file for dt definitions
  clk: at91: add PMC base support
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-04 13:50:33 -08:00
Mike Turquette
9ffe29d780 Merge branch 'clk/clk-unregister' of git://linuxtv.org/snawrocki/samsung into clk-next-unregister 2013-12-04 12:14:59 -08:00
Sylwester Nawrocki
8e6e8f93f7 [media] V4L: Add mem2mem ioctl and file operation helpers
This patch adds ioctl helpers to the V4L2 mem-to-mem API, so we can avoid
several ioctl handlers in the mem-to-mem video node drivers that are simply
a pass-through to the v4l2_m2m_* calls. These helpers will only be useful
for drivers that use same mutex for both OUTPUT and CAPTURE queue, which
is the case for all currently in tree v4l2 m2m drivers. In order to use
the helpers the drivers are required to use struct v4l2_fh.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-12-04 15:34:24 -02:00
Linus Torvalds
8ecffd7914 GPIO fixes for the v3.13 series:
- Fix compile warnings.
 
 - Fix overly talkative diagnostic messages from usual use
   cases wrt GPIO descriptors.
 
 - Add a documentation 00-INDEX
 
 - Use platform GPIOs as fallback when ACPI or device tree is
   used as the primary means to get GPIO lines.
 
 - A bug fix for the MPC8572/MPC8536 fixing erroneous input data.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJSnzPDAAoJEEEQszewGV1zCBkP/RPG63uZXUbedQsDj81CEZmt
 qUR5e8EloSBiUKulI4KIgufVrlBsiZlHRza/Fmw3uOH5T35rWtHkv4rPjZcxNVYh
 wzHIoiQK9fe86chhDSVoBytTX3MkTdAIPmVUuiP6yUgWWU1Z5HVQIGUlydz44Iqk
 bY3DF3HTX9n6skbIXYQ25QUnWRgvcESYJJuQlwOMMEfXXZJpFBxY0Pifborm99wY
 eMyAs6EjSnNJxWLFwBe0YteoppVa1OlaEmMt+sodWhDuNAXFx10dBZluvLposjMh
 wWXObKVnhJcWWqb4B0CZmMI19zBmNRyt0PqT7n/VtTwR4LEYo9c5yPbexOlra0xO
 eDkhOiaVpN2p1B3yLxOf1uX1KvpN/Wg8A+Ht5i2j/Dl8WUpxtir4568a/aFWLT7G
 Ho/fJxjhEvXhvZhdR0RPlFBVhzqi8E6K4dz2TrPOJCZJ1gCN1uzYLHb6pWmQsDRf
 YlvXD9gRRFeuI3tKqOlVEcrzVCKJIj9lPuRD5QIY6hVzLVTYPLrCEv11I9rHCc3d
 wCdjgLHlq3btiEFv2caN680PkmWyMfm8BWn06S7oGA3k4MrcDIksST9874lhk6nb
 jkf+wkrfVLWBO0IMxzqTJVznf3SYHDV7zg5Pdh55rFPb7NOng81IwbMeXvKfESix
 RGR/66Dg30qoyPuEApYI
 =PJQJ
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v3.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
 "Here are a few more GPIO patches, we're a bit noisy for being the GPIO
  subsystem, mostly due to the new descriptor API, but all is getting
  into shape.

   - Fix compile warnings

   - Fix overly talkative diagnostic messages from usual use cases wrt
     GPIO descriptors

   - Add a documentation 00-INDEX

   - Use platform GPIOs as fallback when ACPI or device tree is used as
     the primary means to get GPIO lines

   - A bug fix for the MPC8572/MPC8536 fixing erroneous input data"

* tag 'gpio-v3.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpiolib: change a warning to debug message when failing to get gpio
  powerpc/gpio: Fix the wrong GPIO input data on MPC8572/MPC8536
  gpiolib: use platform GPIO mappings as fallback
  Documentation: gpiolib: add 00-INDEX file
  gpiolib: fix lookup of platform-mapped GPIOs
  gpiolib: add missing declarations
2013-12-04 08:59:33 -08:00
Sakari Ailus
d0700c5175 [media] media: Add pad flag MEDIA_PAD_FL_MUST_CONNECT
Pads that set this flag must be connected by an active link for the entity
to stream.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-12-04 14:59:20 -02:00
Linus Torvalds
d644c026e6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
 "This push fixes a number of crashes triggered by a previous crypto
  self-test update.  It also fixes a build problem in the caam driver,
  as well as a concurrency issue in s390.

  Finally there is a pair of fixes to bugs in the crypto scatterwalk
  code and authenc that may lead to crashes"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: testmgr - fix sglen in test_aead for case 'dst != src'
  crypto: talitos - fix aead sglen for case 'dst != src'
  crypto: caam - fix aead sglen for case 'dst != src'
  crypto: ccm - Fix handling of zero plaintext when computing mac
  crypto: s390 - Fix aes-xts parameter corruption
  crypto: talitos - corrrectly handle zero-length assoc data
  crypto: scatterwalk - Set the chain pointer indication bit
  crypto: authenc - Find proper IV address in ablkcipher callback
  crypto: caam - Add missing Job Ring include
2013-12-04 08:53:09 -08:00
Sylwester Nawrocki
fcb0ee6a3d clk: Implement clk_unregister
clk_unregister() is currently not implemented and it is required when
a clock provider module needs to be unloaded.

Normally the clock supplier module is prevented to be unloaded by
taking reference on the module in clk_get().

For cases when the clock supplier module deinitializes despite the
consumers of its clocks holding a reference on the module, e.g. when
the driver is unbound through "unbind" sysfs attribute, there are
empty clock ops added. These ops are assigned temporarily to struct
clk and used until all consumers release the clock, to avoid invoking
callbacks from the module which just got removed.

Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-12-04 17:19:52 +01:00
Sylwester Nawrocki
ac2df527fb clk: Add common __clk_get(), __clk_put() implementations
This patch adds common __clk_get(), __clk_put() clkdev helpers that
replace their platform specific counterparts when the common clock
API is used.

The owner module pointer field is added to struct clk so a reference
to the clock supplier module can be taken by the clock consumers.

The owner module is assigned while the clock is being registered,
in functions _clk_register() and __clk_register().

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-12-04 17:19:44 +01:00
Linus Walleij
9fb1f39eb2 gpio/pinctrl: make gpio_chip members typed boolean
This switches the two members of struct gpio_chip that were
defined as unsigned foo:1 to bool, because that is indeed what
they are. Switch all users in the gpio and pinctrl subsystems
to assign these values with true/false instead of 0/1. The
users outside these subsystems will survive since true/false
is 1/0, atleast we set some kind of more strict typing example.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-04 14:42:46 +01:00
Eduardo Valentin
39d99cff76 thermal: cpu_cooling: introduce of_cpufreq_cooling_register
This patch introduces an API to register cpufreq cooling device
based on device tree node.

The registration via device tree node differs from normal
registration due to the fact that it is needed to fill
the device_node structure in order to be able to match
the cooling devices with trip points.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-12-04 09:33:34 -04:00
Eduardo Valentin
a116b5d44f thermal: core: introduce thermal_of_cooling_device_register
This patch adds a new API to allow registering cooling devices
in the thermal framework derived from device tree nodes.

This API links the cooling device with the device tree node
so that binding with thermal zones is possible, given
that thermal zones are pointing to cooling device
device tree nodes.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-12-04 09:31:34 -04:00
Eduardo Valentin
4e5e4705bf thermal: introduce device tree parser
This patch introduces a device tree bindings for
describing the hardware thermal behavior and limits.
Also a parser to read and interpret the data and feed
it in the thermal framework is presented.

This patch introduces a thermal data parser for device
tree. The parsed data is used to build thermal zones
and thermal binding parameters. The output data
can then be used to deploy thermal policies.

This patch adds also documentation regarding this
API and how to define tree nodes to use
this infrastructure.

Note that, in order to be able to have control
on the sensor registration on the DT thermal zone,
it was required to allow changing the thermal zone
.get_temp callback. For this reason, this patch
also removes the 'const' modifier from the .ops
field of thermal zone devices.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-12-04 09:31:34 -04:00
Haojian Zhuang
0aa0c95f74 clk: hisilicon: add common clock support
Enable common clock driver of Hi3620 SoC. clkgate-seperated driver is
used to support the clock gate that enable/disable/status registers
are seperated.

Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2013-12-04 18:36:45 +08:00
Ingo Molnar
a934a56e12 Merge branch 'timers/core-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/core
Pull dynticks updates from Frederic Weisbecker:

  * Fix a bug where posix cpu timers requeued due to interval got ignored on full
    dynticks CPUs (not a regression though as it only impacts full dynticks and the
    bug is there since we merged full dynticks).

  * Optimizations and cleanups on the use of per CPU APIs to improve code readability,
    performance and debuggability in the nohz subsystem;

  * Optimize posix cpu timer by sparing stub workqueue queue with full dynticks off case

  * Rename some functions to extend with *_this_cpu() suffix for clarity

  * Refine the naming of some context tracking subsystem state accessors

  * Trivial spelling fix by Paul Gortmaker

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-04 10:09:53 +01:00
Joe Perches
74e22fac88 module.h: Remove unnecessary semicolon
[All 8 callers already have semicolons. -- RR]

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-12-04 14:09:46 +10:30
Olof Johansson
dab719392a Ux500 device tree patches for v3.14, take one:
- Fix up tc3589x bindings so this chip works again.
 
 - Remove SSP platform devices, as we now boot from device tree
   exclusively.
 
 - Delete surplus AB8500/DB8500 platform data, not obtained from
   the device tree.
 
 - Add DMA config for the MSP devices.
 
 - A series of 21 patches moving pin control config for the
   on-chip Nomadik pin controller from the board file
   to the device tree, step by step.
 
 - Two patches to the STE DMA40 driver regarding the high-prio
   DMA channel so this can be moved to the device tree. Both have
   Vinod's ACK.
 
 - Decommission of the non-device tree boot path for the timer
   initialization code.
 
 - Deletion of the non-devicetree probe path from the MTU timer
   driver, as all platforms using it are now using device tree.
   This has Daniel Lezcano's ACK.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJSlQIFAAoJEEEQszewGV1zaaoP/iUClda7fps7dhBZMHOaDr48
 DAe9yBaUoGBgyjOd0QUUP4/P5PxsXQVCM13gdaITt+R4eg8XYxG3jLNxopMfGKYV
 bifbXqEd4wf0t8yUYCzhdfAeWchzSph3W2C7I2hW09b9nhJ+RWgXdzcO061E9Tbj
 BbZ4aS7IR3HfXzQ/zdMBtlbNXkWtn++HXCjC5Z0t0FKqSL7X8LKZrr3GEHZ6vfnB
 sI5/bTK3AfXt7h2wsu4z/IZK89Ttt9AATNhxajW2Pptkuggc+/KfRRDyYeZFBT70
 9KIRsF3NXSsOhOYcRNbWjNU2S8OtC7UyKMB5+y07cYU53ehaiEH8tUMait1cphlc
 kFJAqKXY87I85E6WTEgv1s4Q8H3rQzVc/IjT3LODFbuM3MeTrsrnbKDeFCOqqpJC
 4Ggq6VBXhn7G2srcM5KBYZcZhmq86qhmo0/vUOqaYcdmgdD7KJyewLNafYf5W+DX
 JxVlnzpdWsAhihUV3oBeJybM0YGvE1wa855ZqbsAZ8nrLTBoTD+zi30mIhXrQwQp
 v54ywGa0JtjpTLY6EZG2Rptq4qOUVUbkuNSv+3BYgVTqxCcCqXOu+tuzGk2O1jTh
 8/2biKCCrdbSWCmbMZDi7jlkO5ywqcn2Brav5KyZ+bCwITRybfoxeOv6f8DCT741
 bwx00XNaYVO/H+Vptd+h
 =w9pg
 -----END PGP SIGNATURE-----

Merge tag 'ux500-devicetree-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt

From Linus Walleij:

Ux500 device tree patches for v3.14, take one:

- Fix up tc3589x bindings so this chip works again.

- Remove SSP platform devices, as we now boot from device tree
  exclusively.

- Delete surplus AB8500/DB8500 platform data, not obtained from
  the device tree.

- Add DMA config for the MSP devices.

- A series of 21 patches moving pin control config for the
  on-chip Nomadik pin controller from the board file
  to the device tree, step by step.

- Two patches to the STE DMA40 driver regarding the high-prio
  DMA channel so this can be moved to the device tree. Both have
  Vinod's ACK.

- Decommission of the non-device tree boot path for the timer
  initialization code.

- Deletion of the non-devicetree probe path from the MTU timer
  driver, as all platforms using it are now using device tree.
  This has Daniel Lezcano's ACK.

* tag 'ux500-devicetree-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: (39 commits)
  ARM: ux500: decomission custom SMP TWD timer init
  clksrc: delete nomadik MTU non-DT boot path
  ARM: ux500: decomission the non-DT MTU init sequence
  dma: ste_dma40: Parse flags property for new 'high priority channel' request
  dma: ste_dma40: Expand DT binding to accept 'high-priority channel' flag
  ARM: ux500: Remove checking for DT during timer init
  ARM: ux500: Clean-up legacy extern prototype
  ARM: ux500: Remove unused call to register AMBA devices
  ARM: ux500: Clean-up non-DT IRQ initialisation
  pinctrl: nomadik: decomission non-DT boot path
  pinctrl: nomadik: move platform data handling into driver
  ARM: ux500: get rid of unused header
  ARM: ux500: delete Nomadik pinctrl AUXDATA
  ARM: ux500: delete remnant pin config macros
  ARM: ux500: move snowball pin configs to device tree
  ARM: ux500: move snowball LED pin control to device tree
  ARM: ux500: convert Snowball SPI pin reference
  ARM: ux500: move snowball ethernet config to device tree
  ARM: ux500: move HREFv60plus pin configs to device tree
  ARM: ux500: move final HREFv60 LCD pins to device tree
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-03 16:45:24 -08:00
Greg Kroah-Hartman
55ef003e4a Second round of IIO fixes for the 3.13 cycle.
2 fixes here.
 
 * The gp2ap020a00f is a simple missing kconfig dependency.
 
 * The hid sensors hub fix is a work around for an issue introduced by hardware
 changes due to a certain large software vendor having an 'interesting'
 interpretation of the specification and hence indexing some arrays from 1
 rather than 0.  The fix takes advantage of the logical min and max reading
 facilities introduced by the precursor patch to figure out whether we have
 a 0 indexed or 1 indexed device and to adjust appropriately.  It also
 drops a previous kconfig option that allowed this issue to be worked around
 at build time.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJSnkM1AAoJEFSFNJnE9BaIV/0P/26YRyWfInekegDN9nviEMno
 bBZIQy1iuiZOSqw78XdiN4NBfK3Vy4F/cx+yGkr2fVa6NV/B6p3iL0+Pv4HiZSqs
 VY4TlNs5el7GD399+nOatgCAM6NXvkSE9rOAEdNWgWUupy/XVRx6nCpghRltnmu3
 mSZCywSnHuCCj2TG9Q/FVjMp3GR3GboSnF09Q/8Xxt7HNj2poxAuYCcMGl9SYgDw
 gfaKsmGZk488H5CA2FjIWQ5/5vOTCxoPr5MgTjqfpLD2tB5+ZsdMmDacsEa31nZS
 RHKzLDvYuAlBeaeR/FUeB5S6YgZpB0MulNsF2z2ms99mSmmjWTr1qun5cdMIh9su
 OBKtmew9MnXWlP6yxSVNTvmPbGHSzzb9x2grvptPN6x/08Qk/Sv0qJcmb267Vr0u
 EwqjSqIDdMOTfhlltpWeIF3+6bHj7RTrVfXvNi+plAKx1gp8/2pYZAp05eNHO6tD
 ITyOCiL7O1KNcG5si+EI5EdCqWj9Dmdul16gHFafPohDJWiCNo/aLhb3jQKZWZyA
 JnM6DENEmdicHeYuQKaBV95ptLdzAU9POapJzMMMQVNY5RS6DnHPBVCAuqrkdzAo
 57FT5dewm6FI2+k+ckawtUgyf56nCzsbEHo3iFaHn0ElxWJeR8/Acn/jR6Agm1AN
 DGNgavLLU3kFN9lHjPk3
 =BgVg
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-3.13b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

Second round of IIO fixes for the 3.13 cycle.

2 fixes here.

* The gp2ap020a00f is a simple missing kconfig dependency.

* The hid sensors hub fix is a work around for an issue introduced by hardware
changes due to a certain large software vendor having an 'interesting'
interpretation of the specification and hence indexing some arrays from 1
rather than 0.  The fix takes advantage of the logical min and max reading
facilities introduced by the precursor patch to figure out whether we have
a 0 indexed or 1 indexed device and to adjust appropriately.  It also
drops a previous kconfig option that allowed this issue to be worked around
at build time.
2013-12-03 13:24:58 -08:00
Srinivas Pandruvada
098d3beccf iio: hid-sensors: Added Inclinometer 3D
Added usage id processing for Inclinometer 3D. This uses IIO
interfaces for triggered buffer to present data to user
mode.This uses HID sensor framework for registering callback
events from the sensor hub.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-12-03 20:31:59 +00:00
Harald Geyer
ac216aa290 iio: Add support for humidity sensors
There are already humidity sensors in the hwmon subsystem,
so we use their unit (milli percent) here as well.

Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-12-03 20:22:29 +00:00
Lars-Peter Clausen
647cc7b9be iio: Add data_available callback for buffers
This patch adds a new data_available() callback to the iio_buffer_access_funcs
struct. The callback is used to indicate whether data is available in the buffer
for reading. It is meant to replace the stufftoread flag from the iio_buffer
struct. The reasoning for this is that the buffer implementation usually can
determine whether data is available rather easily based on its state, on the
other hand it can be rather tricky to update the stufftoread flag in a race free
way.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-12-03 20:22:28 +00:00
Sergio Aguirre
59f0ad8076 [media] v4l: omap4iss: Add support for OMAP4 camera interface - Core
This adds a very simplistic driver to utilize the CSI2A interface inside
the ISS subsystem in OMAP4, and dump the data to memory.
Check Documentation/video4linux/omap4_camera.txt for details.
This commit adds the driver core, registers definitions and
documentation.

Signed-off-by: Sergio Aguirre <sergio.a.aguirre@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-12-03 17:21:04 -02:00