This warning seems to show up a lot now, since ___wait_event()
is (indirectly) used inside wait_event_timeout(), which also
has a variable called __ret. Rename the one in ___wait_event()
to ___ret (another leading underscore) to suppress the warning.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1391704121.12789.20.camel@jlt4.sipsolutions.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move the support to perform an HMAC calculation into
the CCP operations file. This eliminates the need to
perform a synchronous SHA operation used to calculate
the HMAC.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull x86 fixes from Peter Anvin:
"Quite a varied little collection of fixes. Most of them are
relatively small or isolated; the biggest one is Mel Gorman's fixes
for TLB range flushing.
A couple of AMD-related fixes (including not crashing when given an
invalid microcode image) and fix a crash when compiled with gcov"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, microcode, AMD: Unify valid container checks
x86, hweight: Fix BUG when booting with CONFIG_GCOV_PROFILE_ALL=y
x86/efi: Allow mapping BGRT on x86-32
x86: Fix the initialization of physnode_map
x86, cpu hotplug: Fix stack frame warning in check_irq_vectors_for_cpu_disable()
x86/intel/mid: Fix X86_INTEL_MID dependencies
arch/x86/mm/srat: Skip NUMA_NO_NODE while parsing SLIT
mm, x86: Revisit tlb_flushall_shift tuning for page flushes except on IvyBridge
x86: mm: change tlb_flushall_shift for IvyBridge
x86/mm: Eliminate redundant page table walk during TLB range flushing
x86/mm: Clean up inconsistencies when flushing TLB ranges
mm, x86: Account for TLB flushes only when debugging
x86/AMD/NB: Fix amd_set_subcaches() parameter type
x86/quirks: Add workaround for AMD F16h Erratum792
x86, doc, kconfig: Fix dud URL for Microcode data
It's no longer referenced outside cgroup core, so renaming is easy.
Let's rename it for consistency & brevity.
This patch is pure rename.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup_subsys is a bit messier than it needs to be.
* The name of a subsys can be different from its internal identifier
defined in cgroup_subsys.h. Most subsystems use the matching name
but three - cpu, memory and perf_event - use different ones.
* cgroup_subsys_id enums are postfixed with _subsys_id and each
cgroup_subsys is postfixed with _subsys. cgroup.h is widely
included throughout various subsystems, it doesn't and shouldn't
have claim on such generic names which don't have any qualifier
indicating that they belong to cgroup.
* cgroup_subsys->subsys_id should always equal the matching
cgroup_subsys_id enum; however, we require each controller to
initialize it and then BUG if they don't match, which is a bit
silly.
This patch cleans up cgroup_subsys names and initialization by doing
the followings.
* cgroup_subsys_id enums are now postfixed with _cgrp_id, and each
cgroup_subsys with _cgrp_subsys.
* With the above, renaming subsys identifiers to match the userland
visible names doesn't cause any naming conflicts. All non-matching
identifiers are renamed to match the official names.
cpu_cgroup -> cpu
mem_cgroup -> memory
perf -> perf_event
* controllers no longer need to initialize ->subsys_id and ->name.
They're generated in cgroup core and set automatically during boot.
* Redundant cgroup_subsys declarations removed.
* While updating BUG_ON()s in cgroup_init_early(), convert them to
WARN()s. BUGging that early during boot is stupid - the kernel
can't print anything, even through serial console and the trap
handler doesn't even link stack frame properly for back-tracing.
This patch doesn't introduce any behavior changes.
v2: Rebased on top of fe1217c4f3 ("net: net_cls: move cgroupfs
classid handling into core").
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: "David S. Miller" <davem@davemloft.net>
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Ingo Molnar <mingo@redhat.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Thomas Graf <tgraf@suug.ch>
With module supported dropped from net_prio, no controller is using
cgroup module support. None of actual resource controllers can be
built as a module and we aren't gonna add new controllers which don't
control resources. This patch drops module support from cgroup.
* cgroup_[un]load_subsys() and cgroup_subsys->module removed.
* As there's no point in distinguishing IS_BUILTIN() and IS_MODULE(),
cgroup_subsys.h now uses IS_ENABLED() directly.
* enum cgroup_subsys_id now exactly matches the list of enabled
controllers as ordered in cgroup_subsys.h.
* cgroup_subsys[] is now a contiguously occupied array. Size
specification is no longer necessary and dropped.
* for_each_builtin_subsys() is removed and for_each_subsys() is
updated to not require any locking.
* module ref handling is removed from rebind_subsystems().
* Module related comments dropped.
v2: Rebased on top of fe1217c4f3 ("net: net_cls: move cgroupfs
classid handling into core").
v3: Added {} around the if (need_forkexit_callback) block in
cgroup_post_fork() for readability as suggested by Li.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
net_prio is the only cgroup which is allowed to be built as a module.
The savings from allowing one controller to be built as a module are
tiny especially given that cgroup module support itself adds quite a
bit of complexity.
Given that none of other controllers has much chance of being made a
module and that we're unlikely to add new modular controllers, the
added complexity is simply not justifiable.
As a first step to drop cgroup module support, this patch changes the
config option to bool from tristate and drops module related code from
it.
Also, while an earlier commit fe1217c4f3 ("net: net_cls: move
cgroupfs classid handling into core") dropped module support from
net_cls cgroup, it retained a call to cgroup_load_subsys(), which is
noop for built-in controllers. Drop it along with
init_netclassid_cgroup().
v2: Removed modular version of task_netprioidx() in
include/net/netprio_cgroup.h as suggested by Li Zefan.
v3: Rebased on top of fe1217c4f3 ("net: net_cls: move cgroupfs
classid handling into core"). net_cls cgroup part is mostly
dropped except for removal of init_netclassid_cgroup().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: "David S. Miller" <davem@davemloft.net>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Thomas Graf <tgraf@suug.ch>
To prepare to implement byte sized index for managing the freelist
of a slab, we should restrict the number of objects in a slab to be less
or equal to 256, since byte only represent 256 different values.
Setting the size of object to value equal or more than newly introduced
SLAB_OBJ_MIN_SIZE ensures that the number of objects in a slab is less or
equal to 256 for a slab with 1 page.
If page size is rather larger than 4096, above assumption would be wrong.
In this case, we would fall back on 2 bytes sized index.
If minimum size of kmalloc is less than 16, we use it as minimum object
size and give up this optimization.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
As sysfs was kernfs's only user, kernfs has been piggybacking on
CONFIG_SYSFS; however, kernfs is scheduled to grow a new user very
soon. Introduce a separate config option CONFIG_KERNFS which is to be
selected by kernfs users.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, kobject is invoking kernfs_enable_ns() directly. This is
fine now as sysfs and kernfs are enabled and disabled together. If
sysfs is disabled, kernfs_enable_ns() is switched to dummy
implementation too and everything is fine; however, kernfs will soon
have its own config option CONFIG_KERNFS and !SYSFS && KERNFS will be
possible, which can make kobject call into non-dummy
kernfs_enable_ns() with NULL kernfs_node pointers leading to an oops.
Introduce sysfs_enable_ns() which is a wrapper around
kernfs_enable_ns() so that it can be made a noop depending only on
CONFIG_SYSFS regardless of the planned CONFIG_KERNFS.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_node->parent and ->name are currently marked as "published"
indicating that kernfs users may access them directly; however, those
fields may get updated by kernfs_rename[_ns]() and unrestricted access
may lead to erroneous values or oops.
Protect ->parent and ->name updates with a irq-safe spinlock
kernfs_rename_lock and implement the following accessors for these
fields.
* kernfs_name() - format the node's name into the specified buffer
* kernfs_path() - format the node's path into the specified buffer
* pr_cont_kernfs_name() - pr_cont a node's name (doesn't need buffer)
* pr_cont_kernfs_path() - pr_cont a node's path (doesn't need buffer)
* kernfs_get_parent() - pin and return a node's parent
All can be called under any context. The recursive sysfs_pathname()
in fs/sysfs/dir.c is replaced with kernfs_path() and
sysfs_rename_dir_ns() is updated to use kernfs_get_parent() instead of
dereferencing parent directly.
v2: Dummy definition of kernfs_path() for !CONFIG_KERNFS was missing
static inline making it cause a lot of build warnings. Add it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement helpers to determine node from dentry and root from
super_block. Also add a kernfs_rename_ns() wrapper which assumes NULL
namespace. These generally make sense and will be used by cgroup.
v2: Some dummy implementations for !CONFIG_SYSFS was missing. Fixed.
Reported by kbuild test robot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a private data field to be used by kernfs file operations. This
generally makes sense and will be used by cgroup.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A write to a kernfs_node is buffered through a kernel buffer. Writes
<= PAGE_SIZE are performed atomically, while larger ones are executed
in PAGE_SIZE chunks. While this is enough for sysfs, cgroup which is
scheduled to be converted to use kernfs needs a bit more control over
it.
This patch adds kernfs_ops->atomic_write_len. If not set (zero), the
behavior stays the same. If set, writes upto the size are executed
atomically and larger writes are rejected with -E2BIG.
A different implementation strategy would be allowing configuring
chunking size while making the original write size available to the
write method; however, such strategy, while being more complicated,
doesn't really buy anything. If the write implementation has to
handle chunking, the specific chunk size shouldn't matter all that
much.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, kernfs_nodes are made visible to userland on creation,
which makes it difficult for kernfs users to atomically succeed or
fail creation of multiple nodes. In addition, if something fails
after creating some nodes, the created nodes might already be in use
and their active refs need to be drained for removal, which has the
potential to introduce tricky reverse locking dependency on active_ref
depending on how the error path is synchronized.
This patch introduces per-root flag KERNFS_ROOT_CREATE_DEACTIVATED.
If set, all nodes under the root are created in the deactivated state
and stay invisible to userland until explicitly enabled by the new
kernfs_activate() API. Also, nodes which have never been activated
are guaranteed to bypass draining on removal thus allowing error paths
to not worry about lockding dependency on active_ref draining.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add two super_block related syscall callbacks ->remount_fs() and
->show_options() to kernfs_syscall_ops. These simply forward the
matching super_operations.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We're gonna need non-dir syscall callbacks, which will make dir_ops a
misnomer. Let's rename kernfs_dir_ops to kernfs_syscall_ops.
This is pure rename.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_dir_ops are currently being invoked without any active
reference, which makes it tricky for the invoked operations to
determine whether the objects associated those nodes are safe to
access and will remain that way for the duration of such operations.
kernfs already has active_ref mechanism to deal with this which makes
the removal of a given node the synchronization point for gating the
file operations. There's no reason for dir_ops to be any different.
Update the dir_ops handling so that active_ref is held while the
dir_ops are executing. This guarantees that while a dir_ops is
executing the target nodes stay alive.
As kernfs_dir_ops doesn't have any in-kernel user at this point, this
doesn't affect anybody.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All device_schedule_callback_owner() users are converted to use
device_remove_file_self(). Remove now unused
{sysfs|device}_schedule_callback_owner().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes it's necessary to implement a node which wants to delete
nodes including itself. This isn't straightforward because of kernfs
active reference. While a file operation is in progress, an active
reference is held and kernfs_remove() waits for all such references to
drain before completing. For a self-deleting node, this is a deadlock
as kernfs_remove() ends up waiting for an active reference that itself
is sitting on top of.
This currently is worked around in the sysfs layer using
sysfs_schedule_callback() which makes such removals asynchronous.
While it works, it's rather cumbersome and inherently breaks
synchronicity of the operation - the file operation which triggered
the operation may complete before the removal is finished (or even
started) and the removal may fail asynchronously. If a removal
operation is immmediately followed by another operation which expects
the specific name to be available (e.g. removal followed by rename
onto the same name), there's no way to make the latter operation
reliable.
The thing is there's no inherent reason for this to be asynchrnous.
All that's necessary to do this synchronous is a dedicated operation
which drops its own active ref and deactivates self. This patch
implements kernfs_remove_self() and its wrappers in sysfs and driver
core. kernfs_remove_self() is to be called from one of the file
operations, drops the active ref the task is holding, removes the self
node, and restores active ref to the dead node so that the ref is
balanced afterwards. __kernfs_remove() is updated so that it takes an
early exit if the target node is already fully removed so that the
active ref restored by kernfs_remove_self() after removal doesn't
confuse the deactivation path.
This makes implementing self-deleting nodes very easy. The normal
removal path doesn't even need to be changed to use
kernfs_remove_self() for the self-deleting node. The method can
invoke kernfs_remove_self() on itself before proceeding the normal
removal path. kernfs_remove() invoked on the node by the normal
deletion path will simply be ignored.
This will replace sysfs_schedule_callback(). A subtle feature of
sysfs_schedule_callback() is that it collapses multiple invocations -
even if multiple removals are triggered, the removal callback is run
only once. An equivalent effect can be achieved by testing the return
value of kernfs_remove_self() - only the one which gets %true return
value should proceed with actual deletion. All other instances of
kernfs_remove_self() will wait till the enclosing kernfs operation
which invoked the winning instance of kernfs_remove_self() finishes
and then return %false. This trivially makes all users of
kernfs_remove_self() automatically show correct synchronous behavior
even when there are multiple concurrent operations - all "echo 1 >
delete" instances will finish only after the whole operation is
completed by one of the instances.
Note that manipulation of active ref is implemented in separate public
functions - kernfs_[un]break_active_protection().
kernfs_remove_self() is the only user at the moment but this will be
used to cater to more complex cases.
v2: For !CONFIG_SYSFS, dummy version kernfs_remove_self() was missing
and sysfs_remove_file_self() had incorrect return type. Fix it.
Reported by kbuild test bot.
v3: kernfs_[un]break_active_protection() separated out from
kernfs_remove_self() and exposed as public API.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KERNFS_REMOVED is used to mark half-initialized and dying nodes so
that they don't show up in lookups and deny adding new nodes under or
renaming it; however, its role overlaps that of deactivation.
It's necessary to deny addition of new children while removal is in
progress; however, this role considerably intersects with deactivation
- KERNFS_REMOVED prevents new children while deactivation prevents new
file operations. There's no reason to have them separate making
things more complex than necessary.
This patch removes KERNFS_REMOVED.
* Instead of KERNFS_REMOVED, each node now starts its life
deactivated. This means that we now use both atomic_add() and
atomic_sub() on KN_DEACTIVATED_BIAS, which is INT_MIN. The compiler
generates an overflow warnings when negating INT_MIN as the negation
can't be represented as a positive number. Nothing is actually
broken but let's bump BIAS by one to avoid the warnings for archs
which negates the subtrahend..
* A new helper kernfs_active() which tests whether kn->active >= 0 is
added for convenience and lockdep annotation. All KERNFS_REMOVED
tests are replaced with negated kernfs_active() tests.
* __kernfs_remove() is updated to deactivate, but not drain, all nodes
in the subtree instead of setting KERNFS_REMOVED. This removes
deactivation from kernfs_deactivate(), which is now renamed to
kernfs_drain().
* Sanity check on KERNFS_REMOVED in kernfs_put() is replaced with
checks on the active ref.
* Some comment style updates in the affected area.
v2: Reordered before removal path restructuring. kernfs_active()
dropped and kernfs_get/put_active() used instead. RB_EMPTY_NODE()
used in the lookup paths.
v3: Reverted most of v2 except for creating a new node with
KN_DEACTIVATED_BIAS.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There currently are two mechanisms gating active ref lockdep
annotations - KERNFS_LOCKDEP flag and KERNFS_ACTIVE_REF type mask.
The former disables lockdep annotations in kernfs_get/put_active()
while the latter disables all of kernfs_deactivate().
While KERNFS_ACTIVE_REF also behaves as an optimization to skip the
deactivation step for non-file nodes, the benefit is marginal and it
needlessly diverges code paths. Let's drop KERNFS_ACTIVE_REF.
While at it, add a test helper kernfs_lockdep() to test KERNFS_LOCKDEP
flag so that it's more convenient and the related code can be compiled
out when not enabled.
v2: Refreshed on top of ("kernfs: make kernfs_deactivate() honor
KERNFS_LOCKDEP flag"). As the earlier patch already added
KERNFS_LOCKDEP tests to kernfs_deactivate(), those additions are
dropped from this patch and the existing ones are simply converted
to kernfs_lockdep().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_addrm_cxt and the accompanying kernfs_addrm_start/finish() were
added because there were operations which should be performed outside
kernfs_mutex after adding and removing kernfs_nodes. The necessary
operations were recorded in kernfs_addrm_cxt and performed by
kernfs_addrm_finish(); however, after the recent changes which
relocated deactivation and unmapping so that they're performed
directly during removal, the only operation kernfs_addrm_finish()
performs is kernfs_put(), which can be moved inside the removal path
too.
This patch moves the kernfs_put() of the base ref to __kernfs_remove()
and remove kernfs_addrm_cxt and kernfs_addrm_start/finish().
* kernfs_add_one() is updated to grab and release kernfs_mutex itself.
sysfs_addrm_start/finish() invocations around it are removed from
all users.
* __kernfs_remove() puts an unlinked node directly instead of chaining
it to kernfs_addrm_cxt. Its callers are updated to grab and release
kernfs_mutex instead of calling kernfs_addrm_start/finish() around
it.
v2: Rebased on top of "kernfs: associate a new kernfs_node with its
parent on creation" which dropped @parent from kernfs_add_one().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_node->u.completion is used to notify deactivation completion
from kernfs_put_active() to kernfs_deactivate(). We now allow
multiple racing removals of the same node and the current removal
scheme is no longer correct - kernfs_remove() invocation may return
before the node is properly deactivated if it races against another
removal. The removal path will be restructured to address the issue.
To help such restructure which requires supporting multiple waiters,
this patch replaces kernfs_node->u.completion with
kernfs_root->deactivate_waitq. This makes deactivation event
notifications share a per-root waitqueue_head; however, the wait path
is quite cold and this will also allow shaving one pointer off
kernfs_node.
v2: Refreshed on top of ("kernfs: make kernfs_deactivate() honor
KERNFS_LOCKDEP flag").
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This allows replying only to the requestor portid while still
supporting broadcasting. Pass 0 to portid for the previous behavior.
Signed-off-by: David Fries <David@Fries.net>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iovcnt is declared as a signed integer in both the userspace API and
as a local variable in mic_virtio.c. The while() loop in mic_virtio.c
iterates until the local variable iovcnt reaches the value 0. If
userspace passes e.g. INT_MIN as iovcnt field, this loop then appears
to depend on an undefined behavior (signed underflow) to complete.
The fix is to use unsigned integers in both the userspace API and
the local variable.
This issue was reported @ https://lkml.org/lkml/2014/1/10/10
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As we implement Virtual Receive Side Scaling on the networking side
(the VRSS patches are currently under review), it will be useful to have
per-channel state that vmbus drivers can manage. Add support for
managing per-channel state.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current channel code is using scatterlist abstraction to pass data to the
ringbuffer API on the send path. This causes unnecessary translations
between virtual and physical addresses. Fix this.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On Gen2 firmware, Hyper-V does not emulate the PCI bus. However, the MMIO
information is packaged up in DSDT. Extract this information and export it
for use by the synthetic framebuffer driver. This is the only driver that
needs this currently.
In this version of the patch mmio, I have updated the hyperv header file
(linux/hyperv.h) with mmio definitions.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the hyperv.h header to the uapi folder, and adds it to the Kbuild file.
Doing this enables compiling userspace Hyper-V tools using the installed headers.
Version 2: Split UAPI parts into new header, instead of duplicating.
Signed-off-by: Bjarke Istrup Pedersen <gurligebis@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 35773dac5f. It's a
hack that caused regressions in the usb-storage and userspace USB
drivers that use usbfs and libusb. Commit 70cabb7d992f "xhci 1.0: Limit
arbitrarily-aligned scatter gather." should fix the issues seen with the
ax88179_178a driver on xHCI 1.0 hosts, without causing regressions.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@vger.kernel.org # 3.12
This is neede for proper SG_IO operation as well as various uses of
blk_execute_rq from the SCSI midlayer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This driver was previously an interface driver. Since USB/IP
exports a whole device, not just an interface, it would make
sense to be a device driver.
This patch also modifies the way userspace sees and uses a
shared device:
* the usbip_status file is no longer created for interface 0, but for
the whole device (such as
/sys/devices/pci0000:00/0000:00:01.2/usb1/1-1/usbip_status).
* per interface information, such as interface class or protocol, is
no longer sent/received; only device specific information is
transmitted.
* since the driver was moved one level below in the USB architecture,
there is no need to bind/unbind each interface, just the device as a
whole.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add hci_h4p bluetooth driver to staging tree. This device is used
for example on Nokia N900 cell phone.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Thanks-to: Sebastian Reichel <sre@debian.org>
Thanks-to: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was wrongly introduced in commit 402b27f9, the only difference
between blkif_request_segment_aligned and blkif_request_segment is
that the former has a named padding, while both share the same
memory layout.
Also correct a few minor glitches in the description, including for it
to no longer assume PAGE_SIZE == 4096.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
[Description fix by Jan Beulich]
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reported-by: Jan Beulich <jbeulich@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Matt Rushton <mrushton@amazon.com>
Cc: Matt Wilson <msw@amazon.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
During the initial VMBUS connect phase, starting with WS2012 R2, we should
specify the VPCU in the guest that should receive the notification. Fix this
issue. This fix is required to properly connect to the host in the kexeced
kernel.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: <stable@vger.kernel.org> [3.9+]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make the stub function static inline instead of static and move the
clockevents related function into the proper ifdeffed section.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
On some architectures, in certain CPU deep idle states the local timers stop.
An external clock device is used to wakeup these CPUs. The kernel support for the
wakeup of these CPUs is provided by the tick broadcast framework by using the
external clock device as the wakeup source.
However not all implementations of architectures provide such an external
clock device. This patch includes support in the broadcast framework to handle
the wakeup of the CPUs in deep idle states on such systems by queuing a hrtimer
on one of the CPUs, which is meant to handle the wakeup of CPUs in deep idle states.
This patchset introduces a pseudo clock device which can be registered by the
archs as tick_broadcast_device in the absence of a real external clock
device. Once registered, the broadcast framework will work as is for these
architectures as long as the archs take care of the BROADCAST_ENTER
notification failing for one of the CPUs. This CPU is made the stand by CPU to
handle wakeup of the CPUs in deep idle and it *must not enter deep idle states*.
The CPU with the earliest wakeup is chosen to be this CPU. Hence this way the
stand by CPU dynamically moves around and so does the hrtimer which is queued
to trigger at the next earliest wakeup time. This is consistent with the case where
an external clock device is present. The smp affinity of this clock device is
set to the CPU with the earliest wakeup. This patchset handles the hotplug of
the stand by CPU as well by moving the hrtimer on to the CPU handling the CPU_DEAD
notification.
Originally-from: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: deepthi@linux.vnet.ibm.com
Cc: paulmck@linux.vnet.ibm.com
Cc: fweisbec@gmail.com
Cc: paulus@samba.org
Cc: srivatsa.bhat@linux.vnet.ibm.com
Cc: svaidy@linux.vnet.ibm.com
Cc: peterz@infradead.org
Cc: benh@kernel.crashing.org
Cc: rafael.j.wysocki@intel.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20140207080632.17187.80532.stgit@preeti.in.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The intent of this new field in the directory entry is to
allow a subsequent lookup to know how many blocks, which
are contiguous with the inode, contain metadata which relates
to the inode. This will then allow the issuing of a single
read to read these blocks, rather than reading the inode
first, and then issuing a second read for the metadata.
This only works under some fairly strict conditions, since
we do not have back pointers from inodes to directory entries
we must ensure that the blocks referenced in this way will
always belong to the inode.
This rules out being able to use this system for indirect
blocks, as these can change as a result of truncate/rewrite.
So the idea here is to restrict this to xattr blocks only
for the time being. For most inodes, that means only a
single block. Also, when using ACLs and/or SELinux or
other LSMs, these will be added at inode creation time
so that they will be contiguous with the inode on disk and
also will almost always be needed when we read the inode in
for permissions checks.
Once an xattr block for an inode is allocated, it will never
change until the inode is deallocated.
This patch adds the new field, a further patch will add the
readahead in due course.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
There are several left overs with my old email address.
Remove their occurrences and add myself at CREDITS, to
allow people to be able to reach me on my new addresses.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The documentation was not clear about whether
gpio_direction_output should take a logical value or the physical
level on the output line, i.e. whether the ACTIVE_LOW status
would be taken into account.
This converts gpiod_direction_output to use the logical level
and adds a new gpiod_direction_output_raw for the raw value.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Commit c1be5232d2 ("Fix micro UAR allocator") broke binary compatibility
between libmlx5 and mlx5_ib since it defines a different value to the number
of micro UARs per page, leading to wrong calculation in libmlx5. This patch
defines struct mlx5_ib_alloc_ucontext_req_v2 as an extension to struct
mlx5_ib_alloc_ucontext_req. The extended size is determined in mlx5_ib_alloc_ucontext()
and in case of old library we use uuarn 0 which works fine -- this is
acheived due to create_user_qp() falling back from high to medium then to
low class where low class will return 0. For new libraries we use the
more sophisticated allocation algorithm.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Commit cfd280c912 ("net: sync some IP headers with glibc") changed a set of
define's to an enum (with no explanation why) which introduced a bug
in module mip6 where aliases are generated using the IPPROTO_* defines;
mip6 doesn't load if require_module called with the aliases from
xfrm_get_type().
Reverting this change back to define's to fix the aliases.
modinfo mip6 (before this change)
alias: xfrm-type-10-IPPROTO_DSTOPTS
alias: xfrm-type-10-IPPROTO_ROUTING
modinfo mip6 (after this change)
alias: xfrm-type-10-43
alias: xfrm-type-10-60
Signed-off-by: Jan Moskyto Matejka <mq@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a patch to improve swap readahead algorithm. It's from Hugh and
I slightly changed it.
Hugh's original changelog:
swapin readahead does a blind readahead, whether or not the swapin is
sequential. This may be ok on harddisk, because large reads have
relatively small costs, and if the readahead pages are unneeded they can
be reclaimed easily - though, what if their allocation forced reclaim of
useful pages? But on SSD devices large reads are more expensive than
small ones: if the readahead pages are unneeded, reading them in caused
significant overhead.
This patch adds very simplistic random read detection. Stealing the
PageReadahead technique from Konstantin Khlebnikov's patch, avoiding the
vma/anon_vma sophistications of Shaohua Li's patch, swapin_nr_pages()
simply looks at readahead's current success rate, and narrows or widens
its readahead window accordingly. There is little science to its
heuristic: it's about as stupid as can be whilst remaining effective.
The table below shows elapsed times (in centiseconds) when running a
single repetitive swapping load across a 1000MB mapping in 900MB ram
with 1GB swap (the harddisk tests had taken painfully too long when I
used mem=500M, but SSD shows similar results for that).
Vanilla is the 3.6-rc7 kernel on which I started; Shaohua denotes his
Sep 3 patch in mmotm and linux-next; HughOld denotes my Oct 1 patch
which Shaohua showed to be defective; HughNew this Nov 14 patch, with
page_cluster as usual at default of 3 (8-page reads); HughPC4 this same
patch with page_cluster 4 (16-page reads); HughPC0 with page_cluster 0
(1-page reads: no readahead).
HDD for swapping to harddisk, SSD for swapping to VertexII SSD. Seq for
sequential access to the mapping, cycling five times around; Rand for
the same number of random touches. Anon for a MAP_PRIVATE anon mapping;
Shmem for a MAP_SHARED anon mapping, equivalent to tmpfs.
One weakness of Shaohua's vma/anon_vma approach was that it did not
optimize Shmem: seen below. Konstantin's approach was perhaps mistuned,
50% slower on Seq: did not compete and is not shown below.
HDD Vanilla Shaohua HughOld HughNew HughPC4 HughPC0
Seq Anon 73921 76210 75611 76904 78191 121542
Seq Shmem 73601 73176 73855 72947 74543 118322
Rand Anon 895392 831243 871569 845197 846496 841680
Rand Shmem 1058375 1053486 827935 764955 764376 756489
SSD Vanilla Shaohua HughOld HughNew HughPC4 HughPC0
Seq Anon 24634 24198 24673 25107 21614 70018
Seq Shmem 24959 24932 25052 25703 22030 69678
Rand Anon 43014 26146 28075 25989 26935 25901
Rand Shmem 45349 45215 28249 24268 24138 24332
These tests are, of course, two extremes of a very simple case: under
heavier mixed loads I've not yet observed any consistent improvement or
degradation, and wider testing would be welcome.
Shaohua Li:
Test shows Vanilla is slightly better in sequential workload than Hugh's
patch. I observed with Hugh's patch sometimes the readahead size is
shrinked too fast (from 8 to 1 immediately) in sequential workload if
there is no hit. And in such case, continuing doing readahead is good
actually.
I don't prepare a sophisticated algorithm for the sequential workload
because so far we can't guarantee sequential accessed pages are swap out
sequentially. So I slightly change Hugh's heuristic - don't shrink
readahead size too fast.
Here is my test result (unit second, 3 runs average):
Vanilla Hugh New
Seq 356 370 360
Random 4525 2447 2444
Attached graph is the swapin/swapout throughput I collected with 'vmstat
2'. The first part is running a random workload (till around 1200 of
the x-axis) and the second part is running a sequential workload.
swapin and swapout throughput are almost identical in steady state in
both workloads. These are expected behavior. while in Vanilla, swapin
is much bigger than swapout especially in random workload (because wrong
readahead).
Original patches by: Shaohua Li and Konstantin Khlebnikov.
[fengguang.wu@intel.com: swapin_nr_pages() can be static]
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since the only existing caller of acpiphp_check_host_bridge(),
which is acpi_pci_root_scan_dependent(), already has a struct
acpi_device pointer needed to obtain the ACPIPHP context, it
doesn't make sense to execute acpi_bus_get_device() on its
handle in acpiphp_handle_to_bridge() just in order to get that
pointer back.
For this reason, modify acpiphp_check_host_bridge() to take
a struct acpi_device pointer as its argument and rearrange the
code accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since acpi_bus_notify() is executed on all notifications for all
devices anyway, make it execute acpi_device_hotplug() for all
hotplug events instead of installing notify handlers pointing to
the same function for all hotplug devices.
This change reduces both the size and complexity of ACPI-based device
hotplug code. Moreover, since acpi_device_hotplug() only does
significant things for devices that have either an ACPI scan handler,
or a hotplug context with .eject() defined, and those devices
had notify handlers pointing to acpi_hotplug_notify_cb() installed
before anyway, this modification shouldn't change functionality.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since acpi_hotplug_notify_cb() does not use its data argument any
more, the second argument of acpi_install_hotplug_notify_handler()
can be dropped, so do that and update its callers accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>