Commit graph

79,435 commits

Author SHA1 Message Date
Al Viro
f482e1b4a4 switch compat_sys_open* to COMPAT_SYSCALL_DEFINE 2013-02-03 15:09:24 -05:00
Al Viro
495dfbf767 generic sys_sigaction() and compat_sys_sigaction()
conditional on OLD_SIGACTION/COMPAT_OLD_SIGACTION

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03 15:09:23 -05:00
Al Viro
08d32fe504 generic sys_compat_rt_sigaction()
Again, protected by a temporary config symbol (GENERIC_COMPAT_RT_SIGACTION);
will be gone by the end of series.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03 15:09:23 -05:00
Al Viro
574c4866e3 consolidate kernel-side struct sigaction declarations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03 15:09:22 -05:00
Al Viro
92a3ce4a1e consolidate declarations of k_sigaction
Only alpha and sparc are unusual - they have ka_restorer in it.
And nobody needs that exposed to userland.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03 15:09:22 -05:00
Al Viro
9aae8fc05d switch rt_tgsigqueueinfo to COMPAT_SYSCALL_DEFINE
C ABI violations on sparc, ppc and mips

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03 15:09:21 -05:00
Al Viro
0a0e8cdf73 old sigsuspend variants in kernel/signal.c
conditional on OLD_SIGSUSPEND/OLD_SIGSUSPEND3, depending on which
variety of that fossil is needed.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03 15:09:20 -05:00
Al Viro
75907d4d7b generic compat_sys_rt_sigqueueinfo()
conditional on GENERIC_COMPAT_RT_SIGQUEUEINFO; by the end of that series
it will become the same thing as COMPAT and conditional will die out.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03 15:09:19 -05:00
Al Viro
fe9c1db2cf generic compat_sys_rt_sigpending()
conditional on GENERIC_COMPAT_RT_SIGPENDING; by the end of that series
it will become the same thing as COMPAT and conditional will die out.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03 15:09:19 -05:00
Al Viro
322a56cb1f generic compat_sys_rt_sigprocmask()
conditional on GENERIC_COMPAT_RT_SIGPROCMASK; by the end of that series
it will become the same thing as COMPAT and conditional will die out.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03 15:09:19 -05:00
Al Viro
eaca6eae3e sanitize rt_sigaction() situation a bit
Switch from __ARCH_WANT_SYS_RT_SIGACTION to opposite
(!CONFIG_ODD_RT_SIGACTION); the only two architectures that
need it are alpha and sparc.  The reason for use of CONFIG_...
instead of __ARCH_... is that it's needed only kernel-side
and doing it that way avoids a mess with include order on many
architectures.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03 15:09:18 -05:00
Eric Lapuyade
cfad1ba871 NFC: Initial support for Inside Secure microread
Inside Secure microread is an HCI based NFC chipset.
This initial support includes reader and p2p (Target and initiator) modes.

Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-03 20:37:42 +01:00
Ingo Molnar
f7355a5e7c Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core
Pull tracing updated from Steve Rostedt.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-03 11:14:06 +01:00
David S. Miller
33397a7121 Merge branch 'delete-wanrouter' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Paul Gortmaker says:

====================
The removal of wanrouter code was originally listed in the (now
gone) feature removal file since May 2012, and an RFC of the
deletion was posted[1] in late 2012.  The overall concept was given
an OK, but defconfig contamination, build failures, etc. meant that
it didn't quite make it into mainline for 3.8.

Since that time, Dan discovered (via code audit) a runtime bug that
proves nobody has been using this for over four years[2].  With that
new information, I think it makes sense for someone to follow through
on Joe's original RFC and get this done for the 3.9 release.

In addition to resolving the build failures of the RFC by keeping
stub headers, this also splits the change into two parts, just like
the token ring removal did.  Part #1 decouples the mainline kernel
from the expired subsystem, and part #2 does the large scale
deletion of the subsystem content.

The advantage of the above, is that a "git blame" will never lead
you to a 4000+ line deletion commit.  The large scale deletion will
never show up in a "git blame" and hence the same advantages that we
get from the "--irreversible-delete" in the review stage of "git
format-patch" are also embedded into the git history itself.  This
may seem like a moot point to some, but for those who spend a
considerable amount of time data mining in the git history, this is
probably worth doing.

I have done build tests of all[mod/yes]config for both the stage 1
(Makefile and Kconfig) and stage 2 (full driver delete) as a sanity
check, and the issues with the previously posted RFC should be gone.

Speaking of "--irreversible-delete" -- these patches were created
with that option, so if you want to use them locally, you are going
to have to pull (location below) the content instead of doing a
"git am" of the mailed out content.

[1] http://patchwork.ozlabs.org/patch/198794/
[2] http://www.spinics.net/lists/netdev/msg218670.html
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-02 23:13:00 -05:00
Bjorn Helgaas
f2dfcde4cc Merge branch 'pci/misc' into next
* pci/misc:
  PCI: pciehp: Drop suspend/resume ENTRY messages
  PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc
  PCI: Document hpiosize= and hpmemsize= resource reservation parameters
  PCI: Use PCI Express Capability accessor
  PCI: Introduce accessor to retrieve PCIe Capabilities Register
  PCI: Kill pci_is_reassigndev()
2013-02-02 14:35:57 -07:00
Guenter Roeck
6cb2afd7c0 iio: Simplify iio_map_array_unregister API
Instead of requiring the map to unregister, simply unregister all map entries
associated with the given iio device. This simplifies map removal and also works
for maps generated through devicetree.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-02-02 12:02:20 +00:00
Guenter Roeck
ca7d98dbd7 iio: Update iio_channel_get_all and iio_channel_get_all_cb API
Pass device pointer instead of device name as parameter to iio_channel_get_all
and iio_channel_get_all_cb. This will enable us to use OF information to
retrieve consumer channel information.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-02-02 11:58:46 +00:00
Denis CIOCCA
4d2e4fc224 iio:common: removed unused functions outside st_sensors library
This patch remove st_sensors_get_sampling_frequency_avl and
st_sensors_get_scale_avl functions used only in
st_sensors_sysfs_sampling_frequency_avail and st_sensors_sysfs_scale_avail
sysfs functions.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-02-02 09:37:54 +00:00
Manuel Stahl
9dbf091da0 iio: gyro: Add itg3200
This patch adds support for the InvenSense itg3200.
The itg3200 is a three-axis gyro with 16-bit ADC and
I2C interface.

Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-02-02 09:33:33 +00:00
Peter Ujfalusi
261a5edd3a pwm: Add devm_of_pwm_get() as exported API for users
When booted with DT users can use devm version of of_pwm_get() to benefit
from automatic resource release.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-01 17:47:05 -08:00
Peter Ujfalusi
8eb9612799 pwm: core: Rename of_pwm_request() to of_pwm_get() and export it
Allow client driver to use of_pwm_get() to get the PWM they need. This
is needed for drivers which handle more than one PWM separately, like
leds-pwm driver, which have:

pwmleds {
	compatible = "pwm-leds";
	kpad {
		label = "omap4::keypad";
		pwms = <&twl_pwm 0 7812500>;
		max-brightness = <127>;
	};

	charging {
		label = "omap4:green:chrg";
		pwms = <&twl_pwmled 0 7812500>;
		max-brightness = <255>;
	};
};

in the dts files.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-01 17:47:05 -08:00
Peter Ujfalusi
d4c0c4705b pwm: Correct parameter name in header for *pwm_get() functions
To synchronize the header file definition and the actual code. In the code
the consumer parameter is named as con_id, change the header file and replace
consumer -> con_id in the parameter list.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Ackedy-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-01 17:47:05 -08:00
Peter Ujfalusi
9ea6cdac9b leds: leds-pwm: Convert to use devm_get_pwm
Update the driver to use the new API for requesting pwm so we can take
advantage of the pwm_lookup table to find the correct pwm to be used for the
LED functionality.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-01 17:47:04 -08:00
Alex Deucher
7271c7f999 drm/radeon: add Oland pci ids
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-01 19:35:02 -05:00
Viresh Kumar
62b36cc1c8 cpufreq: Remove unnecessary use of policy->shared_type
policy->shared_type field was added only for SoCs with ACPI support:

commit 3b2d99429e
Author: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Wed Dec 14 15:05:00 2005 -0500

    P-state software coordination for ACPI core

    http://bugzilla.kernel.org/show_bug.cgi?id=5737

Many non-ACPI systems are filling this field by mistake, which makes its usage
confusing. Lets clean it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-02 01:29:32 +01:00
Viresh Kumar
b394058f06 cpufreq: governors: Reset tunables only for cpufreq_unregister_governor()
Currently, whenever governor->governor() is called for CPUFRREQ_GOV_START event
we reset few tunables of governor. Which isn't correct, as this routine is
called for every cpu hot-[un]plugging event. We should actually be resetting
these only when the governor module is removed and re-installed.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-02 01:29:31 +01:00
Fabio Baltieri
2624f90c16 cpufreq: governors: implement generic policy_is_shared
Implement a generic helper function policy_is_shared() to replace the
current dbs_sw_coordinated_cpus() at cpufreq level, so that it can be
used by code other than cpufreq governors.

Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-02 00:01:16 +01:00
Viresh Kumar
951fc5f458 cpufreq: Update Documentation for cpus and related_cpus
Documentation related to cpus and related_cpus is confusing and not very clear.
Over that CPUFreq core has seen much changes recently. Lets update documentation
and comments for cpus and related_cpus.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-02 00:01:16 +01:00
Rob Herring
300586778d ARM / highbank: add support for pl320 IPC
The pl320 IPC allows for interprocessor communication between the
highbank A9 and the EnergyCore Management Engine. The pl320 implements
a straightforward mailbox protocol.

Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-02 00:01:15 +01:00
Borislav Petkov
ab45bd9bed cpufreq: Sort function prototypes properly
Move function prototypes to a place where they logically fit better.

Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-02 00:01:15 +01:00
Borislav Petkov
9d95046e5d cpufreq: Add a get_current_driver helper
Add a helper function to return cpufreq_driver->name.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-02 00:01:15 +01:00
Viresh Kumar
b8eed8af94 cpufreq: Simplify __cpufreq_remove_dev()
__cpufreq_remove_dev() is called on multiple occasions: cpufreq_driver
unregister and cpu removals.

Current implementation of this routine is overly complex without much need. If
the cpu to be removed is the policy->cpu, we remove the policy first and add all
other cpus again from policy->cpus and then finally call __cpufreq_remove_dev()
again to remove the cpu to be deleted. Haahhhh..

There exist a simple solution to removal of a cpu:
- Simply use the old policy structure
- update its fields like: policy->cpu, etc.
- notify any users of cpufreq, which depend on changing policy->cpu

Hence this patch, which tries to implement the above theory. It is tested well
by myself on ARM big.LITTLE TC2 SoC, which has 5 cores (2 A15 and 3 A7). Both
A15's share same struct policy and all A7's share same policy structure.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-02 00:01:14 +01:00
Ezequiel Garcia
dc75eb36c3 mtd: omap-onenand: pass device_node in platform data
Pass an optional device_node pointer in the platform data,
which in turn will be put into a mtd_part_parser_data.
This way, code that sets up the platform devices can pass
along the node from DT so that the partitions can be parsed.

For non-DT boards, this change has no effect.

Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-02-01 14:10:11 -08:00
Rafał Miłecki
97cc019ee5 bcma: cc: fix (and rename) define of NAND flash type
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01 14:27:25 -05:00
Johan Hedberg
83be8eca2e Bluetooth: Keep track of UUID type upon addition
The primary purpose of the UUIDs is to enable generation of EIR and AD
data. In these data formats the UUIDs are split into separate fields
based on whether they're 16, 32 or 128 bit UUIDs. To make the generation
of these data fields simpler this patch adds a type member to the
bt_uuid struct and assigns a value to it as soon as the UUID is added to
the kernel. This way the type doesn't need to be calculated each time
the UUID list is later iterated.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-02-01 15:50:17 -02:00
Trond Myklebust
77102893ae SUNRPC: Nuke the tk_xprt macro
It is no longer in use

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-02-01 10:13:48 -05:00
Trond Myklebust
6a24dfb645 SUNRPC: Pass pointers to struct rpc_xprt to the congestion window
Avoid access to task->tk_xprt

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-02-01 10:13:47 -05:00
Trond Myklebust
1b092092bf SUNRPC: Pass a pointer to struct rpc_xprt to the connect callback
Avoid another RCU dereference by passing the pointer to struct rpc_xprt
from the caller.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-02-01 10:13:47 -05:00
Christoph Lameter
ca34956b80 slab: Common definition for kmem_cache_node
Put the definitions for the kmem_cache_node structures together so that
we have one structure. That will allow us to create more common fields in
the future which could yield more opportunities to share code.

Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-02-01 12:32:09 +02:00
Christoph Lameter
2c59dd6544 slab: Common Kmalloc cache determination
Extract the optimized lookup functions from slub and put them into
slab_common.c. Then make slab use these functions as well.

Joonsoo notes that this fixes some issues with constant folding which
also reduces the code size for slub.

https://lkml.org/lkml/2012/10/20/82

Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-02-01 12:32:08 +02:00
Christoph Lameter
9425c58e54 slab: Common definition for the array of kmalloc caches
Have a common definition fo the kmalloc cache arrays in
SLAB and SLUB

Acked-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-02-01 12:32:07 +02:00
Christoph Lameter
95a05b428c slab: Common constants for kmalloc boundaries
Standardize the constants that describe the smallest and largest
object kept in the kmalloc arrays for SLAB and SLUB.

Differentiate between the maximum size for which a slab cache is used
(KMALLOC_MAX_CACHE_SIZE) and the maximum allocatable size
(KMALLOC_MAX_SIZE, KMALLOC_MAX_ORDER).

Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-02-01 12:32:07 +02:00
Christoph Lameter
6a67368c36 slab: Rename nodelists to node
Have a common naming between both slab caches for future changes.

Acked-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-02-01 12:32:06 +02:00
Christoph Lameter
6744f087ba slab: Common name for the per node structures
Rename the structure used for the per node structures in slab
to have a name that expresses that fact.

Acked-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-02-01 12:32:06 +02:00
Christoph Lameter
e33660165c slab: Use common kmalloc_index/kmalloc_size functions
Make slab use the common functions. We can get rid of a lot
of old ugly stuff as a results. Among them the sizes
array and the weird include/linux/kmalloc_sizes file and
some pretty bad #include statements in slab_def.h.

The one thing that is different in slab is that the 32 byte
cache will also be created for arches that have page sizes
larger than 4K. There are numerous smaller allocations that
SLOB and SLUB can handle better because of their support for
smaller allocation sizes so lets keep the 32 byte slab also
for arches with > 4K pages.

Reviewed-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-02-01 12:32:06 +02:00
Christoph Lameter
ce6a50263d slab: Common kmalloc slab index determination
Extract the function to determine the index of the slab within
the array of kmalloc caches as well as a function to determine
maximum object size from the nr of the kmalloc slab.

This is used here only to simplify slub bootstrap but will
be used later also for SLAB.

Acked-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-02-01 12:32:05 +02:00
Christoph Lameter
3450466734 slab: Move kmalloc related function defs
Move these functions higher up in slab.h so that they are grouped with other
generic kmalloc related definitions.

Acked-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-02-01 12:32:05 +02:00
Will Deacon
9e02e394c7 Merge branch 'for-will/arch-timer-unification' of git://linux-arm.org/linux-mr into for-arm-soc/arch-timers 2013-02-01 10:28:36 +00:00
Jussi Kivilinna
7e50f84c94 pf_key/xfrm_algo: prepare pf_key and xfrm_algo for new algorithms without pfkey support
Mark existing algorithms as pfkey supported and make pfkey only use algorithms
that have pfkey_supported set.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-02-01 10:13:43 +01:00
Stephen Warren
e1d7ef1cc4 clocksource: always define CLOCKSOURCE_OF_DECLARE
This allows clocksource drivers that support both DT and non-DT to
always invoke macro CLOCKSOURCE_OF_DECLARE(), rather than wrapping
it in a #ifdef CONFIG_CLKSRC_OF, which simplifies their code.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-31 19:57:30 -08:00