Commit graph

79,438 commits

Author SHA1 Message Date
Rob Clark
8bb0daffb0 drm/omap: move out of staging
Now that the omapdss interface has been reworked so that omapdrm can use
dispc directly, we have been able to fix the remaining functional kms
issues with omapdrm.  And in the mean time the PM sequencing and many
other of that open issues have been solved.  So I think it makes sense
to finally move omapdrm out of staging.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-02-16 17:38:06 -05:00
Pali Rohár
ac6324e702 bq2415x_charger: Add support for offline and 100mA mode
* Renamed mode BQ2415X_MODE_NONE to BQ2415X_MODE_OFF because this mode
  turning chaging completly off

* Added new mode BQ2415X_MODE_NONE which enable charging with maximal
  current limit 100mA (this is minimal safe value for bq2415x chips)

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-02-16 13:34:10 -08:00
Yinghai Lu
181380b702 PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers
Previously, we cached _PRT (PCI routing table, ACPI 5.0 sec 6.2.12)
contents and associated each _PRT entry with a PCI bus number.  The bus
number association means dependencies on PCI device enumeration and bus
number assignment, as well as on the PCI/ACPI binding process.

After 4f535093cf ("PCI: Put pci_dev in device tree as early as possible"),
these dependencies caused the IRQ issues reported by Peter:

    pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
    pci 0000:00:1e.0: can't derive routing for PCI INT A
    snd_ctxfi 0000:09:02.0: PCI INT A: no GSI - using ISA IRQ 5
    irq 18: nobody cared (try booting with the "irqpoll" option)

This patch removes _PRT caching.  Instead, we evaluate _PRT as needed
in the pci_enable_device() path.  This also removes the dependency on
PCI bus numbers: we can simply look at the _PRT associated with each
bridge as we walk upstream toward the root.

[bhelgaas: changelog]
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=53561
Reported-and-tested-by: Peter Hurley <peter@hurleysoftware.com>
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-02-16 11:58:34 -07:00
Takashi Iwai
c881f80ba8 ASoC: Final updates for v3.9
A few more updates from the past week - a new driver from Dialog and
 some small fixes and tweaks.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRHR9WAAoJELSic+t+oim9H3QP/A7oiOZ2uF1IcIKSrAr5NTAM
 523dXLfomETMyIqJAJ0RHC19xWb3CRpU0TBzlMnv/RGorVo89DHOTpzxUsuMYpYP
 VZiGTJFAm4c4LEIjcT4zYKwkEWQ+2dppLkjDRSTgf//SM6bgQKbpfct6fRx7GY2x
 ay1wb6zUjLhNBrW9P15Ci8KfhOigJ/iuNJfkhgOvsTU8JI6Gvl3bMhzGooQV0RYL
 oY7nf9N+AauoaAbvC76BBhT56kEx+2VqQGQXQNFXFwXr5MTrnHD7zMismNYo7jvJ
 LU0V9z85jNJtsV7Q0Ho2n5PsVs6pPg5elbMAVgnN5iDBXkQApxqmiPXPihgAtdCk
 PC96cCabwfmCzZwVN9+n7sZ05SF+knaHgObnFOgbRwzTkNsgeMGXuvN82STxP+tO
 H60ZT14MuaICIaflq3Zp0OibLY4oGfeE2zN7fVf30RHTkdxBkoiET8bb4mBrzeL5
 vZ0PxqsTu3pty4OlOtzC9qiZ8KAc3L7rM+BrQmH7NJdLiEKZ+oKwN3pVpmxS/0l4
 P9/ugz7m1zuceb4qPLg0svV5tXegwOfIZdr2nekM2BpOFJm0pYy6glvdMEW9kPr5
 oV255aTQRrFEV6LygMxIbycdGdSA/zjaUxrXIN2vthQYChCwrlKeTzhxmx+DrpLb
 TAvcZm453VXhyuTAb4N2
 =ivD5
 -----END PGP SIGNATURE-----

Merge tag 'asoc-3.9-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Final updates for v3.9

A few more updates from the past week - a new driver from Dialog and
some small fixes and tweaks.
2013-02-16 15:48:48 +01:00
Stephen Warren
9eee07d39f Input: tegra-kbc - require CONFIG_OF, remove platform data
Tegra only supports, and always enables, device tree. Remove all ifdefs
and runtime checks for DT support from the driver. Platform data is
therefore no longer required. Delete the header that defines it, and
rework the driver to parse the device tree directly into struct
tegra_kbc.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-15 18:52:58 -08:00
Michael Trimarchi
0db3863add Input: bma150 - make some defines public and fix some comments
Make the constants referring to range and bandwidth public so they can
be used when initializing the platform data fields in the platform code.

Fix also some comments regarding the unit of measurement to use for the
range and bandwidth fields, the values are not actually expected to be
in G or HZ, the code in bma150.c just uses the BMA150_RANGE_xxx and
BMA150_BW_xxx constants like they are with no translation from actual
values in G or HZ.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Antonio Ospite <ao2@amarulasolutions.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-15 18:52:45 -08:00
Pravin B Shelar
68c3316311 v4 GRE: Add TCP segmentation offload for GRE
Following patch adds GRE protocol offload handler so that
skb_gso_segment() can segment GRE packets.
SKB GSO CB is added to keep track of total header length so that
skb_segment can push entire header. e.g. in case of GRE, skb_segment
need to push inner and outer headers to every segment.
New NETIF_F_GRE_GSO feature is added for devices which support HW
GRE TSO offload. Currently none of devices support it therefore GRE GSO
always fall backs to software GSO.

[ Compute pkt_len before ip_local_out() invocation. -DaveM ]

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-15 15:17:11 -05:00
Pravin B Shelar
05e8ef4ab2 net: factor out skb_mac_gso_segment() from skb_gso_segment()
This function will be used in next GRE_GSO patch. This patch does
not change any functionality. It only exports skb_mac_gso_segment()
function.

[ Use skb_reset_mac_len() -DaveM ]

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-15 15:16:03 -05:00
Pravin B Shelar
14bbd6a565 net: Add skb_unclone() helper function.
This function will be used in next GRE_GSO patch. This patch does
not change any functionality.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Eric Dumazet <edumazet@google.com>
2013-02-15 15:10:37 -05:00
Tim Gardner
f25cc71e63 lockd: nlmclnt_reclaim(): avoid stack overflow
Even though nlmclnt_reclaim() is only one call into the stack frame,
928 bytes on the stack seems like a lot. Recode to dynamically
allocate the request structure once from within the reclaimer task,
then pass this pointer into nlmclnt_reclaim() for reuse on
subsequent calls.

smatch analysis:

fs/lockd/clntproc.c:620 nlmclnt_reclaim() warn: 'reqst' puts
 928 bytes on stack

Also remove redundant assignment of 0 after memset.

Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-02-15 11:29:38 -05:00
Vladimir Davydov
686855f5d8 sched: add wait_for_completion_io[_timeout]
The only difference between wait_for_completion[_timeout]() and
wait_for_completion_io[_timeout]() is that the latter calls
io_schedule_timeout() instead of schedule_timeout() so that the caller
is accounted as waiting for IO, not just sleeping.

These functions can be used for correct iowait time accounting when the
completion struct is actually used for waiting for IO (e.g. completion
of a bio request in the block layer).

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-02-15 16:45:06 +01:00
Stanislav Kinsbursky
21cd1254d3 SUNRPC: remove "cache_request" argument in sunrpc_cache_pipe_upcall() function
Passing this pointer is redundant since it's stored on cache_detail structure,
which is also passed to sunrpc_cache_pipe_upcall () function.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-02-15 10:43:47 -05:00
Stanislav Kinsbursky
73fb847a44 SUNRPC: introduce cache_detail->cache_request callback
This callback will allow to simplify upcalls in further patches in this
series.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-02-15 10:43:45 -05:00
Rafael J. Wysocki
4419fbd4b4 Merge branch 'pm-cpufreq'
* pm-cpufreq: (55 commits)
  cpufreq / intel_pstate: Fix 32 bit build
  cpufreq: conservative: Fix typos in comments
  cpufreq: ondemand: Fix typos in comments
  cpufreq: exynos: simplify .init() for setting policy->cpus
  cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs
  cpufreq/x86: Add P-state driver for sandy bridge.
  cpufreq_stats: do not remove sysfs files if frequency table is not present
  cpufreq: Do not track governor name for scaling drivers with internal governors.
  cpufreq: Only call cpufreq_out_of_sync() for driver that implement cpufreq_driver.target()
  cpufreq: Retrieve current frequency from scaling drivers with internal governors
  cpufreq: Fix locking issues
  cpufreq: Create a macro for unlock_policy_rwsem{read,write}
  cpufreq: Remove unused HOTPLUG_CPU code
  cpufreq: governors: Fix WARN_ON() for multi-policy platforms
  cpufreq: ondemand: Replace down_differential tuner with adj_up_threshold
  cpufreq / stats: Get rid of CPUFREQ_STATDEVICE_ATTR
  cpufreq: Don't check cpu_online(policy->cpu)
  cpufreq: add imx6q-cpufreq driver
  cpufreq: Don't remove sysfs link for policy->cpu
  cpufreq: Remove unnecessary use of policy->shared_type
  ...
2013-02-15 13:59:07 +01:00
Rafael J. Wysocki
7113fe74c1 Merge branch 'pm-assorted'
* pm-assorted:
  suspend: enable freeze timeout configuration through sys
  ACPI: enable ACPI SCI during suspend
  PM: Introduce suspend state PM_SUSPEND_FREEZE
  PM / Runtime: Add new helper function: pm_runtime_active()
  PM / tracing: remove deprecated power trace API
  PM: don't use [delayed_]work_pending()
  PM / Domains: don't use [delayed_]work_pending()
2013-02-15 13:58:54 +01:00
Rafael J. Wysocki
e8f71df723 Merge branch 'acpi-cleanup'
* acpi-cleanup: (21 commits)
  ACPI / hotplug: Fix concurrency issues and memory leaks
  ACPI: Remove the use of CONFIG_ACPI_CONTAINER_MODULE
  ACPI / scan: Full transition to D3cold in acpi_device_unregister()
  ACPI / scan: Make acpi_bus_hot_remove_device() acquire the scan lock
  ACPI: Drop the container.h header file
  ACPI / Documentation: refer to correct file for acpi_platform_device_ids[] table
  ACPI / scan: Make container driver use struct acpi_scan_handler
  ACPI / scan: Remove useless #ifndef from acpi_eject_store()
  ACPI: Unbind ACPI drv when probe failed
  ACPI: sysfs eject support for ACPI scan handlers
  ACPI / scan: Follow priorities of IDs when matching scan handlers
  ACPI / PCI: pci_slot: replace printk(KERN_xxx) with pr_xxx()
  ACPI / dock: Fix acpi_bus_get_device() check in drivers/acpi/dock.c
  ACPI / scan: Clean up acpi_bus_get_parent()
  ACPI / platform: Use struct acpi_scan_handler for creating devices
  ACPI / PCI: Make PCI IRQ link driver use struct acpi_scan_handler
  ACPI / PCI: Make PCI root driver use struct acpi_scan_handler
  ACPI / scan: Introduce struct acpi_scan_handler
  ACPI / scan: Make scanning of fixed devices follow the general scheme
  ACPI: Drop device start operation that is not used
  ...
2013-02-15 13:58:30 +01:00
Ben Widawsky
41907ddc1b drm/i915: Fix gen2 mappable calculations
When I refactored the code initially, I forgot that gen2 uses a
different bar for the CPU mappable aperture. The agp-less code knows
nothing of generations less than 5, so we have to expand the gtt_probe
function to include the mappable base and end.

It was originally broken by me:
commit baa09f5fd8
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Thu Jan 24 13:49:57 2013 -0800

    drm/i915: Add probe and remove to the gtt ops

Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-15 10:30:38 +01:00
Haojian Zhuang
ea27c39617 pinctrl: generic: rename input schmitt disable
Rename PIN_CONFIG_INPUT_SCHMITT_DISABLE to
PIN_CONFIG_INPUT_SCHMITT_ENABLE. It's used to make it more generialize.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-15 09:52:29 +01:00
Johannes Berg
932dd97c5f nl80211: renumber NL80211_FEATURE_FULL_AP_CLIENT_STATE
Adding the flag to mac80211 already without testing was
clearly a mistake, one that we now pay for by having to
reserve bit 13 forever. The problem is cfg80211 doesn't
allow capability/rate changes for station entries that
were added unassociated, so the station entries cannot
be set up properly when marked associated.

Change the NL80211_FEATURE_FULL_AP_CLIENT_STATE value
to make it clear to userspace implementations that all
current kernels don't actually support it, even though
the previous bit is set, and of course also remove the
flag from mac80211 until we test and fix the issues.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15 09:41:44 +01:00
Jouni Malinen
9d62a98617 cfg80211: Pass station (extended) capability info to kernel
The information of the peer's capabilities and extended capabilities are
required for the driver to perform TDLS Peer UAPSD operations and off
channel operations. This information of the peer is passed from user space
using NL80211_CMD_SET_STATION command. This commit enhances
the function nl80211_set_station to pass the capability information of
the peer to the driver.

Similarly, there may be need for capability information for other modes,
so allow this to be provided with both add_station and change_station.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15 09:41:43 +01:00
Johannes Berg
c6f9d6c3bd mac80211: advertise operating mode notification capability
Use the new extended capabilities advertising to advertise
the fact that operating mode notification is supported.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15 09:41:42 +01:00
Johannes Berg
a50df0c4c0 cfg80211: advertise extended capabilities to userspace
In many cases, userspace may need to know which of the
802.11 extended capabilities ("Extended Capabilities
element") are implemented in the driver or device, to
include them e.g. in beacons, assoc request/response
or other frames. Add a new nl80211 attribute to hold
the extended capabilities bitmap for this.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15 09:41:42 +01:00
Johannes Berg
af0ed69bad mac80211: stop modifying HT SMPS capability
Instead of modifying the HT SMPS capability field
for stations, track the SMPS mode explicitly in a
new field in the station struct and use it in the
drivers that care about it. This simplifies the
code using it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15 09:41:41 +01:00
Johannes Berg
4a3cb702b0 mac80211: constify IE parsing
Make all the parsed IE pointers const, and propagate
the change to all the users etc.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15 09:41:39 +01:00
Johannes Berg
50640f1693 nl80211: advertise HT/VHT channel limitations
When drivers or regulatory have limitations on
40, 80 or 160 MHz channels, advertise these to
userspace via nl80211. Also add a new feature
flag to let userspace know this is supported.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15 09:41:38 +01:00
Johannes Berg
c7a6ee27ab cfg80211: allow drivers to selectively disable 80/160 MHz
Some drivers might support 80 or 160 MHz only on some
channels for whatever reason, so allow them to disable
these channel widths. Also maintain the new flags when
regulatory bandwidth limitations would disable these
wide channels.

Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15 09:41:38 +01:00
Johannes Berg
2c9b735982 mac80211: add ieee80211_vif_change_bandwidth
For HT and VHT the current bandwidth can change,
add the function ieee80211_vif_change_bandwidth()
to take care of this. It returns a failure if the
new bandwidth isn't compatible with the existing
channel context, the caller has to handle that.
When it happens, also inform the driver that the
bandwidth changed for this virtual interface (no
drivers would actually care today though.)

Changing to/from HT/VHT isn't allowed though.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15 09:41:36 +01:00
Johannes Berg
0af83d3df5 mac80211: handle VHT operating mode notification
Handle the operating mode notification action frame.
When the supported streams or the bandwidth change
let the driver and rate control algorithm know.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15 09:41:32 +01:00
Johannes Berg
8921d04e8d mac80211: track number of spatial streams
With VHT, a station can change the number of spatial
streams it can receive on the fly, not unlike spatial
multiplexing in HT. Prepare for that by tracking the
maximum number of spatial streams it can receive when
the connection is established.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15 09:41:31 +01:00
Johannes Berg
7bf9b9a0f0 wireless: define operating mode action frame
Define the action frame format, the VHT category
and its action types and the field format and EID
for operating mode notifications. The frame may
be used outside of VHT context as well, so don't
include "VHT" in the names.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15 09:41:31 +01:00
Johannes Berg
e1a0c6b3a4 mac80211: stop toggling IEEE80211_HT_CAP_SUP_WIDTH_20_40
For VHT, many more bandwidth changes are possible. As a first
step, stop toggling the IEEE80211_HT_CAP_SUP_WIDTH_20_40 flag
in the HT capabilities and instead introduce a bandwidth field
indicating the currently usable bandwidth to transmit to the
station. Of course, make all drivers use it.

To achieve this, make ieee80211_ht_cap_ie_to_sta_ht_cap() get
the station as an argument, rather than the new capabilities,
so it can set up the new bandwidth field.

If the station is a VHT station and VHT bandwidth is in use,
also set the bandwidth accordingly.

Doing this allows us to get rid of the supports_40mhz flag as
the HT capabilities now reflect the true capability instead of
the current setting.

While at it, also fix ieee80211_ht_cap_ie_to_sta_ht_cap() to not
ignore HT cap overrides when MCS TX isn't supported (not that it
really happens...)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15 09:41:30 +01:00
Simon Wunderlich
164eb02d07 mac80211: add radar detection command/event
Add command to trigger radar detection in the driver/FW.
Once radar detection is started it should continuously
monitor for radars as long as the channel active.
If radar is detected usermode notified with 'radar
detected' event.

Scanning and remain on channel functionality must be disabled
while doing radar detection/scanning, and vice versa.

Based on original patch by Victor Goldenshtein <victorg@ti.com>

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15 09:41:04 +01:00
Simon Wunderlich
04f39047af nl80211/cfg80211: add radar detection command/event
Add new NL80211_CMD_RADAR_DETECT, which starts the Channel
Availability Check (CAC). This command will also notify the
usermode about events (CAC finished, CAC aborted, radar
detected, NOP finished).
Once radar detection has started it should continuously
monitor for radars as long as the channel is active.

This patch enables DFS for AP mode in nl80211/cfg80211.

Based on original patch by Victor Goldenshtein <victorg@ti.com>

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
[remove WIPHY_FLAG_HAS_RADAR_DETECT again -- my mistake]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15 09:40:18 +01:00
Arnd Bergmann
56cc6cb707 ARM defconfigs: add missing inclusions of linux/platform_device.h
Patch 16559ae "kgdb: remove #include <linux/serial_8250.h> from kgdb.h"
removed an implicit inclusion of linux/platform_device.h
In a number of places. This adds back explicit inclusions in a few
more places I found.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-14 15:14:32 -08:00
Thomas Gleixner
9f4646d283 Merge branch 'fortglx/3.9/time' of git://git.linaro.org/people/jstultz/linux into timers/core 2013-02-14 19:46:10 +01:00
David S. Miller
e0376d0043 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:

====================
1) Remove a duplicated call to skb_orphan() in pf_key, from Cong Wang.

2) Prepare xfrm and pf_key for algorithms without pf_key support,
   from Jussi Kivilinna.

3) Fix an unbalanced lock in xfrm_output_one(), from Li RongQing.

4) Add an IPsec state resolution packet queue to handle
   packets that are send before the states are resolved.

5) xfrm4_policy_fini() is unused since 2.6.11, time to remove it.
   From Michal Kubecek.

6) The xfrm gc threshold was configurable just in the initial
   namespace, make it configurable in all namespaces. From
   Michal Kubecek.

7) We currently can not insert policies with mark and mask
   such that some flows would be matched from both policies.
   Allow this if the priorities of these policies are different,
   the one with the higher priority is used in this case.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-14 13:29:20 -05:00
Mark Brown
54759313ec Merge remote-tracking branch 'asoc/topic/da7213' into asoc-next 2013-02-14 17:28:00 +00:00
Adam Thomson
ef5c2eba24 ASoC: codecs: Add da7213 codec
This patch adds support for the Dialog DA7213 audio codec.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-14 17:27:17 +00:00
Mark Brown
a2b37efc4e Merge remote-tracking branch 'regmap/topic/no-bus' into regmap-next 2013-02-14 17:11:09 +00:00
Mark Brown
a31f68497e Merge remote-tracking branch 'regmap/topic/mmio' into regmap-next 2013-02-14 17:11:08 +00:00
Mark Brown
5dea215028 Merge remote-tracking branch 'regmap/topic/irq' into regmap-next 2013-02-14 17:11:08 +00:00
Mark Brown
7798b582d3 Merge remote-tracking branch 'regmap/topic/flat' into regmap-next 2013-02-14 17:11:07 +00:00
Mark Brown
3689cf7fd1 Merge remote-tracking branch 'regmap/topic/async' into regmap-next 2013-02-14 17:11:03 +00:00
Philipp Zabel
878ec67b3a regmap: mmio: add register clock support
Some mmio devices have a dedicated interface clock that needs
to be enabled to access their registers. This patch optionally
enables a clock before accessing registers in the regmap_bus
callbacks.

I added (devm_)regmap_init_mmio_clk variants of the init
functions that have an added clk_id string parameter. This
is passed to clk_get to request the clock from the clk
framework.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-14 16:40:28 +00:00
Tony Lindgren
64ff167333 Merge branch 'usbhost17-for-arm-soc' of git://github.com/rogerq/linux into omap-for-v3.9/usb 2013-02-14 08:36:17 -08:00
Martin Schwidefsky
abf09bed3c s390/mm: implement software dirty bits
The s390 architecture is unique in respect to dirty page detection,
it uses the change bit in the per-page storage key to track page
modifications. All other architectures track dirty bits by means
of page table entries. This property of s390 has caused numerous
problems in the past, e.g. see git commit ef5d437f71
"mm: fix XFS oops due to dirty pages without buffers on s390".

To avoid future issues in regard to per-page dirty bits convert
s390 to a fault based software dirty bit detection mechanism. All
user page table entries which are marked as clean will be hardware
read-only, even if the pte is supposed to be writable. A write by
the user process will trigger a protection fault which will cause
the user pte to be marked as dirty and the hardware read-only bit
is removed.

With this change the dirty bit in the storage key is irrelevant
for Linux as a host, but the storage key is still required for
KVM guests. The effect is that page_test_and_clear_dirty and the
related code can be removed. The referenced bit in the storage
key is still used by the page_test_and_clear_young primitive to
provide page age information.

For page cache pages of mappings with mapping_cap_account_dirty
there will not be any change in behavior as the dirty bit tracking
already uses read-only ptes to control the amount of dirty pages.
Only for swap cache pages and pages of mappings without
mapping_cap_account_dirty there can be additional protection faults.
To avoid an excessive number of additional faults the mk_pte
primitive checks for PageDirty if the pgprot value allows for writes
and pre-dirties the pte. That avoids all additional faults for
tmpfs and shmem pages until these pages are added to the swap cache.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14 15:55:23 +01:00
Heiko Carstens
7292e7e01c asm-generic/io.h: convert readX defines to functions
E.g. readl is defined like this

 #define readl(addr) __le32_to_cpu(__raw_readl(addr))

If a there is a readl() call that doesn't check the return value
this will cause a compile warning on big endian machines due to
the __le32_to_cpu macro magic.

E.g. code like this:

	readl(addr);

will generate the following compile warning:

warning: value computed is not used [-Wunused-value]

With this patch we get rid of dozens of compile warnings on s390.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14 15:55:00 +01:00
Andy Shevchenko
978c4172af dmaengine.h: remove redundant else keyword
dmaengine_device_control returns -ENOSYS in case the dma driver doesn't have
such functionality.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14 20:00:53 +05:30
Thomas Gleixner
7d7e499f73 smpboot: Allow selfparking per cpu threads
The stop machine threads are still killed when a cpu goes offline. The
reason is that the thread is used to bring the cpu down, so it can't
be parked along with the other per cpu threads.

Allow a per cpu thread to be excluded from automatic parking, so it
can park itself once it's done

Add a create callback function as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Arjan van de Veen <arjan@infradead.org>
Cc: Paul Turner <pjt@google.com>
Cc: Richard Weinberger <rw@linutronix.de>
Cc: Magnus Damm <magnus.damm@gmail.com>
Link: http://lkml.kernel.org/r/20130131120741.553993267@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-02-14 15:29:37 +01:00
Al Viro
d64008a8f3 burying unused conditionals
__ARCH_WANT_SYS_RT_SIGACTION,
__ARCH_WANT_SYS_RT_SIGSUSPEND,
__ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND,
__ARCH_WANT_COMPAT_SYS_SCHED_RR_GET_INTERVAL - not used anymore
CONFIG_GENERIC_{SIGALTSTACK,COMPAT_RT_SIG{ACTION,QUEUEINFO,PENDING,PROCMASK}} -
can be assumed always set.
2013-02-14 09:21:15 -05:00