Commit graph

287,159 commits

Author SHA1 Message Date
Carlo Caione
3cafb70cab mmc: core: Enable tuning according to the actual timing
commit e10c321977 upstream.

While in sdhci_execute_tuning() the choice whether or not to enable the
tuning is done on the actual timing, in the mmc_sdio_init_uhs_card() the
check is done on the capability of the card.

This difference is causing some issues with some SDIO cards in DDR50
mode where the CDM19 is wrongly issued.

With this patch we modify the check in both
mmc_(sd|sdio)_init_uhs_card() functions to take the proper decision
only according to the actual timing specification.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:15 -08:00
Adrian Hunter
fca2d31d02 mmc: sdhci: Fix sdhci_runtime_pm_bus_on/off()
commit 5c671c410c upstream.

sdhci has a legacy facility to prevent runtime suspend if the
bus power is on.  This is needed in cases where the power to
the card is dependent on the bus power.  It is controlled by
a pair of functions: sdhci_runtime_pm_bus_on() and
sdhci_runtime_pm_bus_off().  These functions use a boolean
variable 'bus_on' to ensure changes are always paired.
There is an additional check for 'runtime_suspended' which is
the problem.  In fact, its use is ill-conceived as the only
requirement for the logic is that 'on' and 'off' are paired,
which is actually broken by the check, for example if the bus
power is turned on during runtime resume.  So remove  the check.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:15 -08:00
Wenkai Du
6eec26b7b0 mmc: mmc: Fix incorrect use of driver strength switching HS200 and HS400
commit adb24d42a5 upstream.

Commit cc4f414c88 ("mmc: mmc: Add driver strength selection")
added driver strength selection for eMMC HS200 and HS400 modes.
That patch also set the driver stength when transitioning through
High Speed mode to HS200/HS400, but driver strength is not defined
for High Speed mode.  While the JEDEC specification is not clear
on this point it has been observed to cause problems for some eMMC,
and removing the driver strength setting in this case makes it
consistent with the normal use of High Speed mode.

Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:15 -08:00
Adrian Hunter
8ae7192d91 mmc: sdio: Fix invalid vdd in voltage switch power cycle
commit d9bfbb95ed upstream.

The 'ocr' parameter passed to mmc_set_signal_voltage()
defines the power-on voltage used when power cycling
after a failure to set the voltage.  However, in the
case of mmc_sdio_init_card(), the value passed has the
R4_18V_PRESENT flag set which is not valid for power-on
and results in an invalid vdd.  Fix by passing the card's
ocr value which does not have the flag.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:15 -08:00
Adrian Hunter
1477290546 mmc: sdhci: Fix DMA descriptor with zero data length
commit 347ea32dc1 upstream.

SDHCI has built-in DMA called ADMA2.  ADMA2 uses a descriptor
table to define DMA scatter-gather.  Each desciptor can specify
a data length up to 65536 bytes, however the length field is
only 16-bits so zero means 65536.  Consequently, putting zero
when the size is zero must not be allowed.  This patch fixes
one case where zero data length could be set inadvertently.

The problem happens because unaligned data gets split and the
code did not consider that the remaining aligned portion might
be zero length.  That case really only happens for SDIO because
SD and eMMC cards transfer blocks that are invariably sector-
aligned.  For SDIO, access to function registers is done by
data transfer (CMD53) when the register is bigger than 1 byte.
Generally registers are 4 bytes but 2-byte registers are possible.
So DMA of 4 bytes or less can happen.  When 32-bit DMA is used,
the data alignment must be 4, so 4-byte transfers won't casue a
problem, but a 2-byte transfer could.  However with the introduction
of 64-bit DMA, the data alignment for 64-bit DMA was made 8 bytes,
so all 4-byte transfers not on 8-byte boundaries get "split" into
a 4-byte chunk and a 0-byte chunk, thereby hitting the bug.

In fact, a closer look at the SDHCI specs indicates that only the
descriptor table requires 8-byte alignment for 64-bit DMA.  That
will be dealt with in a separate patch, but the potential for a
2-byte access remains, so this fix is needed anyway.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:15 -08:00
Adrian Hunter
4a3d7e16b0 mmc: sdhci-pci: Do not default to 33 Ohm driver strength for Intel SPT
commit 1ca8968562 upstream.

In some cases, the stronger 33 Ohm driver strength must not be used
so it is not a suitable default.  Change it to the standard default
50 Ohm value.

The patch applies to v4.2+ except the file name changed.  It is
drivers/mmc/host/sdhci-pci.c prior to v.4.4.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:15 -08:00
Rabin Vincent
84bad9db0d mmc: usdhi6rol0: handle NULL data in timeout
commit 05caee939f upstream.

Commit bb08a7d489 ("mmc: usdhi6rol0: fix NULL pointer deref in debug
print") fixed one NULL pointer dereference but unfortunately introduced
another.  "data" may be NULL if this is a command timeout for a command
without any data, so we should only use it if we're actually waiting for
data.

Fixes: bb08a7d489 ("mmc: usdhi6rol0: fix NULL pointer deref in debug print")
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:15 -08:00
Alexandre Belloni
c0cbcf2cb5 clockevents/tcb_clksrc: Prevent disabling an already disabled clock
commit f02b4b72d1 upstream.

clockevents_exchange_device is calling clockevents_shutdown() on the new
clockenvents device but it may have never been enabled in the first place.
This results in the tcb clock being disabled without being enabled first:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:680 clk_disable+0x28/0x34()
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.0+ #6
Hardware name: Atmel AT91SAM9
[<c000f2b8>] (unwind_backtrace) from [<c000d01c>] (show_stack+0x10/0x14)
[<c000d01c>] (show_stack) from [<c00172f0>] (warn_slowpath_common+0x78/0xa0)
[<c00172f0>] (warn_slowpath_common) from [<c00173a8>] (warn_slowpath_null+0x18/0x20)
[<c00173a8>] (warn_slowpath_null) from [<c0361528>] (clk_disable+0x28/0x34)
[<c0361528>] (clk_disable) from [<c034d560>] (tc_shutdown+0x38/0x4c)
[<c034d560>] (tc_shutdown) from [<c0059ad4>] (clockevents_switch_state+0x38/0x6c)
[<c0059ad4>] (clockevents_switch_state) from [<c0059b18>] (clockevents_shutdown+0x10/0x24)
[<c0059b18>] (clockevents_shutdown) from [<c005a458>] (tick_check_new_device+0x84/0xac)
[<c005a458>] (tick_check_new_device) from [<c0059660>] (clockevents_register_device+0x7c/0x108)
[<c0059660>] (clockevents_register_device) from [<c06b5a68>] (tcb_clksrc_init+0x390/0x3e8)
[<c06b5a68>] (tcb_clksrc_init) from [<c00097cc>] (do_one_initcall+0x114/0x1d4)
[<c00097cc>] (do_one_initcall) from [<c069bd54>] (kernel_init_freeable+0xfc/0x1b8)
[<c069bd54>] (kernel_init_freeable) from [<c04c3818>] (kernel_init+0x8/0xe0)
[<c04c3818>] (kernel_init) from [<c000a410>] (ret_from_fork+0x14/0x24)
---[ end trace 0000000000000001 ]---

Check what state we were in before trying to disable the clock.

Fixes: cf4541c101 ("clockevents/drivers/tcb_clksrc: Migrate to new 'set-state' interface")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: http://lkml.kernel.org/r/1452854061-30370-1-git-send-email-alexandre.belloni@free-electrons.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:15 -08:00
Ashok Kumar
b966c761af irqchip/gic-v3-its: Fix double ICC_EOIR write for LPI in EOImode==1
commit 004fa08d7a upstream.

When the GIC is using EOImode==1, the EOI is done immediately,
leaving the deactivation to be performed when the EOI was
previously done.

Unfortunately, the ITS is not aware of the EOImode at all, and
blindly EOIs the interrupt again. On most systems, this is ignored
(despite being a programming error), but some others do raise a
SError exception as there is no priority drop to perform for this
interrupt.

The fix is to stop trying to be clever, and always call into the
underlying GIC to perform the right access, irrespective of the
more we're in.

[Marc: Reworked commit message]

Fixes: 0b996fd359 ("irqchip/GICv3: Convert to EOImode == 1")
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:14 -08:00
Milo Kim
2edd7c9903 irqchip/atmel-aic: Fix wrong bit operation for IRQ priority
commit 49f34134ae upstream.

Atmel AIC has common structure for SMR (Source Mode Register).

  bit[6:5] Interrupt source type
  bit[2:0] Priority level
  Other bits are unused.

To update new priority value, bit[2:0] should be cleared first and then
new priority level can be written. However, aic_common_set_priority()
helper clears source type bits instead of priority bits.
This patch fixes wrong mask bit operation.

Fixes: b1479ebb77 "irqchip: atmel-aic: Add atmel AIC/AIC5 drivers"
Signed-off-by: Milo Kim <milo.kim@ti.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: Nicholas Ferre <nicolas.ferre@atmel.com>
Link: http://lkml.kernel.org/r/1452669592-3401-2-git-send-email-milo.kim@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:14 -08:00
Oleksij Rempel
4778f99a2c irqchip/mxs: Add missing set_handle_irq()
commit c5b6352030 upstream.

The rework of the driver missed to move the call to set_handle_irq() into
asm9260_of_init(). As a consequence no interrupt entry point is installed and
no interrupts are delivered

Solution is simple: Install the interrupt entry handler.

Fixes: 7e4ac676ee ("irqchip/mxs: Add Alphascale ASM9260 support")
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Cc: kernel@pengutronix.de
Cc: jason@lakedaemon.net
Cc: marc.zyngier@arm.com
Link: http://lkml.kernel.org/r/1454061473-24957-1-git-send-email-linux@rempel-privat.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:14 -08:00
Sekhar Nori
61836242f8 irqchip/omap-intc: Add support for spurious irq handling
commit d3b421cd07 upstream.

Under some conditions, irq sorting procedure used by INTC can go wrong
resulting in a spurious irq getting reported.

If this condition is not handled, it results in endless stream of:

    unexpected IRQ trap at vector 00

messages from ack_bad_irq()

Handle the spurious interrupt condition in omap-intc driver to prevent this.

Measurements using kernel function profiler on AM335x EVM running at 720MHz
show that after this patch omap_intc_handle_irq() takes about 37.4us against
34us before this patch.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/9c78a6db02ac55f7af7371b417b6e414d2c3095b.1450188128.git.nsekhar@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:14 -08:00
Mathieu Poirier
53cc688d09 coresight: checking for NULL string in coresight_name_match()
commit fadf3a44e9 upstream.

Connection child names associated to ports can sometimes be NULL,
which is the case when booting a system on QEMU or when the Coresight
power domain isn't switched on.

This patch is adding a check to make sure a NULL string isn't fed
to strcmp(), something that avoid crashing the system.

Reported-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:14 -08:00
Mike Snitzer
5c6f666742 dm: fix dm_rq_target_io leak on faults with .request_fn DM w/ blk-mq paths
commit 4328daa2e7 upstream.

Using request-based DM mpath configured with the following stacking
(.request_fn DM mpath ontop of scsi-mq paths):

echo Y > /sys/module/scsi_mod/parameters/use_blk_mq
echo N > /sys/module/dm_mod/parameters/use_blk_mq

'struct dm_rq_target_io' would leak if a request is requeued before a
blk-mq clone is allocated (or fails to allocate).  free_rq_tio()
wasn't being called.

kmemleak reported:

unreferenced object 0xffff8800b90b98c0 (size 112):
  comm "kworker/7:1H", pid 5692, jiffies 4295056109 (age 78.589s)
  hex dump (first 32 bytes):
    00 d0 5c 2c 03 88 ff ff 40 00 bf 01 00 c9 ff ff  ..\,....@.......
    e0 d9 b1 34 00 88 ff ff 00 00 00 00 00 00 00 00  ...4............
  backtrace:
    [<ffffffff81672b6e>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff811dbb63>] kmem_cache_alloc+0xc3/0x1e0
    [<ffffffff8117eae5>] mempool_alloc_slab+0x15/0x20
    [<ffffffff8117ec1e>] mempool_alloc+0x6e/0x170
    [<ffffffffa00029ac>] dm_old_prep_fn+0x3c/0x180 [dm_mod]
    [<ffffffff812fbd78>] blk_peek_request+0x168/0x290
    [<ffffffffa0003e62>] dm_request_fn+0xb2/0x1b0 [dm_mod]
    [<ffffffff812f66e3>] __blk_run_queue+0x33/0x40
    [<ffffffff812f9585>] blk_delay_work+0x25/0x40
    [<ffffffff81096fff>] process_one_work+0x14f/0x3d0
    [<ffffffff81097715>] worker_thread+0x125/0x4b0
    [<ffffffff8109ce88>] kthread+0xd8/0xf0
    [<ffffffff8167cb8f>] ret_from_fork+0x3f/0x70
    [<ffffffffffffffff>] 0xffffffffffffffff

crash> struct -o dm_rq_target_io
struct dm_rq_target_io {
    ...
}
SIZE: 112

Fixes: e5863d9ad7 ("dm: allocate requests in target when stacking on blk-mq devices")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:14 -08:00
Mikulas Patocka
1264fbd72f dm snapshot: fix hung bios when copy error occurs
commit 385277bfb5 upstream.

When there is an error copying a chunk dm-snapshot can incorrectly hold
associated bios indefinitely, resulting in hung IO.

The function copy_callback sets pe->error if there was error copying the
chunk, and then calls complete_exception.  complete_exception calls
pending_complete on error, otherwise it calls commit_exception with
commit_callback (and commit_callback calls complete_exception).

The persistent exception store (dm-snap-persistent.c) assumes that calls
to prepare_exception and commit_exception are paired.
persistent_prepare_exception increases ps->pending_count and
persistent_commit_exception decreases it.

If there is a copy error, persistent_prepare_exception is called but
persistent_commit_exception is not.  This results in the variable
ps->pending_count never returning to zero and that causes some pending
exceptions (and their associated bios) to be held forever.

Fix this by unconditionally calling commit_exception regardless of
whether the copy was successful.  A new "valid" parameter is added to
commit_exception -- when the copy fails this parameter is set to zero so
that the chunk that failed to copy (and all following chunks) is not
recorded in the snapshot store.  Also, remove commit_callback now that
it is merely a wrapper around pending_complete.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:14 -08:00
Mike Snitzer
d7a853e6f7 dm space map metadata: remove unused variable in brb_pop()
commit 512167788a upstream.

Remove the unused struct block_op pointer that was inadvertantly
introduced, via cut-and-paste of previous brb_op() code, as part of
commit 50dd842ad.

(Cc'ing stable@ because commit 50dd842ad did)

Fixes: 50dd842ad ("dm space map metadata: fix ref counting bug when bootstrapping a new space map")
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:14 -08:00
Mauro Carvalho Chehab
e862efec72 tda1004x: only update the frontend properties if locked
commit e8beb02343 upstream.

The tda1004x was updating the properties cache before locking.
If the device is not locked, the data at the registers are just
random values with no real meaning.

This caused the driver to fail with libdvbv5, as such library
calls GET_PROPERTY from time to time, in order to return the
DVB stats.

Tested with a saa7134 card 78:
	ASUSTeK P7131 Dual, vendor PCI ID: 1043:4862

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:14 -08:00
Hans Verkuil
368e554ba6 vb2: fix a regression in poll() behavior for output,streams
commit 4623e59674 upstream.

In the 3.17 kernel the poll() behavior changed for output streams:
as long as not all buffers were queued up poll() would return that
userspace can write. This is fine for the write() call, but when
using stream I/O this changed the behavior since the expectation
was that it would wait for buffers to become available for dequeuing.

This patch only enables the check whether you can queue buffers
for file I/O only, and skips it for stream I/O.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:14 -08:00
Antonio Ospite
f51c5d31c8 gspca: ov534/topro: prevent a division by 0
commit dcc7fdbec5 upstream.

v4l2-compliance sends a zeroed struct v4l2_streamparm in
v4l2-test-formats.cpp::testParmType(), and this results in a division by
0 in some gspca subdrivers:

  divide error: 0000 [#1] SMP
  Modules linked in: gspca_ov534 gspca_main ...
  CPU: 0 PID: 17201 Comm: v4l2-compliance Not tainted 4.3.0-rc2-ao2 #1
  Hardware name: System manufacturer System Product Name/M2N-E SLI, BIOS
    ASUS M2N-E SLI ACPI BIOS Revision 1301 09/16/2010
  task: ffff8800818306c0 ti: ffff880095c4c000 task.ti: ffff880095c4c000
  RIP: 0010:[<ffffffffa079bd62>]  [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534]
  RSP: 0018:ffff880095c4fce8  EFLAGS: 00010296
  RAX: 0000000000000000 RBX: ffff8800c9522000 RCX: ffffffffa077a140
  RDX: 0000000000000000 RSI: ffff880095e0c100 RDI: ffff8800c9522000
  RBP: ffff880095e0c100 R08: ffffffffa077a100 R09: 00000000000000cc
  R10: ffff880067ec7740 R11: 0000000000000016 R12: ffffffffa07bb400
  R13: 0000000000000000 R14: ffff880081b6a800 R15: 0000000000000000
  FS:  00007fda0de78740(0000) GS:ffff88012fc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000014630f8 CR3: 00000000cf349000 CR4: 00000000000006f0
  Stack:
   ffffffffa07a6431 ffff8800c9522000 ffffffffa077656e 00000000c0cc5616
   ffff8800c9522000 ffffffffa07a5e20 ffff880095e0c100 0000000000000000
   ffff880067ec7740 ffffffffa077a140 ffff880067ec7740 0000000000000016
  Call Trace:
   [<ffffffffa07a6431>] ? v4l_s_parm+0x21/0x50 [videodev]
   [<ffffffffa077656e>] ? vidioc_s_parm+0x4e/0x60 [gspca_main]
   [<ffffffffa07a5e20>] ? __video_do_ioctl+0x280/0x2f0 [videodev]
   [<ffffffffa07a5ba0>] ? video_ioctl2+0x20/0x20 [videodev]
   [<ffffffffa07a59b9>] ? video_usercopy+0x319/0x4e0 [videodev]
   [<ffffffff81182dc1>] ? page_add_new_anon_rmap+0x71/0xa0
   [<ffffffff811afb92>] ? mem_cgroup_commit_charge+0x52/0x90
   [<ffffffff81179b18>] ? handle_mm_fault+0xc18/0x1680
   [<ffffffffa07a15cc>] ? v4l2_ioctl+0xac/0xd0 [videodev]
   [<ffffffff811c846f>] ? do_vfs_ioctl+0x28f/0x480
   [<ffffffff811c86d4>] ? SyS_ioctl+0x74/0x80
   [<ffffffff8154a8b6>] ? entry_SYSCALL_64_fastpath+0x16/0x75
  Code: c7 93 d9 79 a0 5b 5d e9 f1 f3 9a e0 0f 1f 00 66 2e 0f 1f 84 00
    00 00 00 00 66 66 66 66 90 53 31 d2 48 89 fb 48 83 ec 08 8b 46 10 <f7>
    76 0c 80 bf ac 0c 00 00 00 88 87 4e 0e 00 00 74 09 80 bf 4f
  RIP  [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534]
   RSP <ffff880095c4fce8>
  ---[ end trace 279710c2c6c72080 ]---

Following what the doc says about a zeroed timeperframe (see
http://www.linuxtv.org/downloads/v4l-dvb-apis/vidioc-g-parm.html):

  ...
  To reset manually applications can just set this field to zero.

fix the issue by resetting the frame rate to a default value in case of
an unusable timeperframe.

The fix is done in the subdrivers instead of gspca.c because only the
subdrivers have notion of a default frame rate to reset the camera to.

Signed-off-by: Antonio Ospite <ao2@ao2.it>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:14 -08:00
Laura Abbott
c44a410e16 si2157: return -EINVAL if firmware blob is too big
commit d2cc2f0b35 upstream.

A previous patch added a check if the firmware is too big, but it didn't
set the return error code with the right value.

[mchehab@osg.samsung.com: I ended by applying a v1 of Laura's patch, without
 the proper return code. This patch contains the difference between v2 and v1 of
 the Laura's "si2157: Bounds check firmware" patch]
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Reviewed-by: Olli Salonen <olli.salonen@iki.fi>
Tested-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-03-03 15:07:14 -08:00
Malcolm Priestley
aecba569dc media: dvb-core: Don't force CAN_INVERSION_AUTO in oneshot mode
commit c9d57de610 upstream.

When in FE_TUNE_MODE_ONESHOT the frontend must report
the actual capabilities so user can take appropriate
action.

With frontends that can't do auto inversion this is done
by dvb-core automatically so CAN_INVERSION_AUTO is valid.

However, when in FE_TUNE_MODE_ONESHOT this is not true.

So only set FE_CAN_INVERSION_AUTO in modes other than
FE_TUNE_MODE_ONESHOT

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:13 -08:00
Chen-Yu Tsai
3214cf3b5f rc: sunxi-cir: Initialize the spinlock properly
commit 768acf46e1 upstream.

The driver allocates the spinlock but fails to initialize it correctly.
The kernel reports a BUG indicating bad spinlock magic when spinlock
debugging is enabled.

Call spin_lock_init() on it to initialize it correctly.

Fixes: b4e3e59fb5 ("[media] rc: add sunxi-ir driver")

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:13 -08:00
Alexander Usyskin
a007fc3d65 mei: validate request value in client notify request ioctl
commit 7326fffb71 upstream.

This patch address a possible security issue:

The request field in client notify request ioctl comes from user space
as u32 and is downcasted to u8 with out validation.
Check request field to have approved values
MEI_HBM_NOTIFICATION_STAR/STOP

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:13 -08:00
Tomas Winkler
6472e6b6af mei: fix fasync return value on error
commit ed6dc538e5 upstream.

fasync should return a negative value on error
and not poll mask POLLERR.

Cc: Al Viro <viro@ZenIV.linux.org.uk>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:13 -08:00
Larry Finger
f037c35161 rtlwifi: rtl8723be: Fix module parameter initialization
commit 7079604ddb upstream.

This driver has a number of errors in the module initialization. These
include the following:

Parameter msi_support is stored in two places - one is removed.
Paramters sw_crypto and disable_watchdog were never stored in the final
locations, nor were they initialized properly.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:13 -08:00
Larry Finger
e1b08009fb rtlwifi: rtl8188ee: Fix module parameter initialization
commit 06f34572c6 upstream.

In this driver, parameters disable_watchdog and sw_crypto are never
copied into the locations used in the main code. While modifying the
parameter handling, the copying of parameter msi_support is moved to
be with the rest.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:13 -08:00
Larry Finger
da5c2c01da rtlwifi: rtl8192se: Fix module parameter initialization
commit 7503efbd82 upstream.

Two of the module parameter descriptions show incorrect default values.
In addition the value for software encryption is not transferred to
the locations used by the driver.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:13 -08:00
Larry Finger
626f652ac5 rtlwifi: rtl8723ae: Fix initialization of module parameters
commit 793b099942 upstream.

This driver has some errors in the handling of module parameters. These
include missing initialization for parameters msi_support and
disable_watchdog. In addition, neither of these parameters nor sw_crypto
are transferred into the locations used by the driver. A final fix is
adding parameter msi to the module named and description macros.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:13 -08:00
Larry Finger
b7e9aec7b4 rtlwifi: rtl8192de: Fix incorrect module parameter descriptions
commit d4d60b4caa upstream.

Two of the module parameters are listed with incorrect default values.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:13 -08:00
Larry Finger
8c2265e9fa rtlwifi: rtl8192ce: Fix handling of module parameters
commit b24f19f16b upstream.

The module parameter for software encryption was never transferred to
the location used by the driver.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:13 -08:00
Larry Finger
766e210921 rtlwifi: rtl8192cu: Add missing parameter setup
commit b68d0ae7e5 upstream.

This driver fails to copy the module parameter for software encryption
to the locations used by the main code.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:13 -08:00
Larry Finger
78899f827e rtlwifi: rtl_pci: Fix kernel panic
commit f99551a2d3 upstream.

In commit 38506ecefa (rtlwifi: rtl_pci: Start modification for new
drivers), a bug was introduced that causes a NULL pointer dereference.
As this bug only affects the infrequently used RTL8192EE and only under
low-memory conditions, it has taken a long time for the bug to show up.

The bug was reported on the linux-wireless mailing list and also at
https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/ as
bug #1527603 (kernel crashes due to rtl8192ee driver on ubuntu 15.10).

Fixes: 38506ecefa ("rtlwifi: rtl_pci: Start modification for new drivers")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:12 -08:00
Stefan Haberland
a90ad5c546 s390/dasd: fix performance drop
commit 12d319b920 upstream.

Commit ca369d51b ("sd: Fix device-imposed transfer length limits")
introduced a new queue limit max_dev_sectors which limits the maximum
sectors for requests. The default value leads to small dasd requests
and therefor to a performance drop.
Set the max_dev_sectors value to the same value as the max_hw_sectors
to use the maximum available request size for DASD devices.

Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:12 -08:00
Stefan Haberland
2e80d52bc8 s390/dasd: fix refcount for PAV reassignment
commit 9d862ababb upstream.

Add refcount to the DASD device when a summary unit check worker is
scheduled. This prevents that the device is set offline with worker
in place.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:12 -08:00
Stefan Haberland
ecf5ebf51d s390/dasd: prevent incorrect length error under z/VM after PAV changes
commit 020bf042e5 upstream.

The channel checks the specified length and the provided amount of
data for CCWs and provides an incorrect length error if the size does
not match. Under z/VM with simulation activated the length may get
changed. Having the suppress length indication bit set is stated as
good CCW coding practice and avoids errors under z/VM.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:12 -08:00
Roman Volkov
142ad71dd6 clocksource/drivers/vt8500: Increase the minimum delta
commit f9eccf2461 upstream.

The vt8500 clocksource driver declares itself as capable to handle the
minimum delay of 4 cycles by passing the value into
clockevents_config_and_register(). The vt8500_timer_set_next_event()
requires the passed cycles value to be at least 16. The impact is that
userspace hangs in nanosleep() calls with small delay intervals.

This problem is reproducible in Linux 4.2 starting from:
c6eb3f70d4 ('hrtimer: Get rid of hrtimer softirq')

From Russell King, more detailed explanation:

"It's a speciality of the StrongARM/PXA hardware. It takes a certain
number of OSCR cycles for the value written to hit the compare registers.
So, if a very small delta is written (eg, the compare register is written
with a value of OSCR + 1), the OSCR will have incremented past this value
before it hits the underlying hardware. The result is, that you end up
waiting a very long time for the OSCR to wrap before the event fires.

So, we introduce a check in set_next_event() to detect this and return
-ETIME if the calculated delta is too small, which causes the generic
clockevents code to retry after adding the min_delta specified in
clockevents_config_and_register() to the current time value.

min_delta must be sufficient that we don't re-trip the -ETIME check - if
we do, we will return -ETIME, forward the next event time, try to set it,
return -ETIME again, and basically lock the system up. So, min_delta
must be larger than the check inside set_next_event(). A factor of two
was chosen to ensure that this situation would never occur.

The PXA code worked on PXA systems for years, and I'd suggest no one
changes this mechanism without access to a wide range of PXA systems,
otherwise they're risking breakage."

Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Alexey Charkov <alchark@gmail.com>
Signed-off-by: Roman Volkov <rvolkov@v1ros.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:11 -08:00
Daniel Vetter
cc082a1cde drm/i915: shut up gen8+ SDE irq dmesg noise
commit 97e5ed1111 upstream.

We get tons of cases where the master interrupt handler apparently set
a bit, with the SDEIIR disagreeing. No idea what's going on there, but
it's consistent on gen8+, no one seems to care about it and it's
making CI results flaky.

Shut it up.

No idea what's going on here, but we've had fun with PCH interrupts
before:

commit 44498aea29
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date:   Fri Feb 22 17:05:28 2013 -0300

    drm/i915: also disable south interrupts when handling them

Note that there's a regression report in Bugzilla, and other
regression reports on the mailing lists keep croping up. But no ill
effects have ever been reported. But for paranoia still keep the
message at a debug level as a breadcrumb, just in case.

This message was introduced in

commit 38cc46d73e
Author: Oscar Mateo <oscar.mateo@intel.com>
Date:   Mon Jun 16 16:10:59 2014 +0100

    drm/i915/bdw: Ack interrupts before handling them (GEN8)

v2: Improve commit message a bit.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1445590572-23631-2-git-send-email-daniel.vetter@ffwll.ch
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92084
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80896
Acked-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:10 -08:00
Hariprasad S
64fb3e29bf iw_cxgb3: Fix incorrectly returning error on success
commit 67f1aee6f4 upstream.

The cxgb3_*_send() functions return NET_XMIT_ values, which are
positive integers values. So don't treat positive return values
as an error.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
[a pox on developers and maintainers who do not cc: stable for bug fixes like this - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:10 -08:00
Michael Welling
50d6040375 spi: omap2-mcspi: Prevent duplicate gpio_request
commit 2f538c017e upstream.

Occasionally the setup function will be called multiple times. Only request
the gpio the first time otherwise -EBUSY will occur on subsequent calls to
setup.

Reported-by: Joseph Bell <joe@iachieved.it>

Signed-off-by: Michael Welling <mwelling@ieee.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:10 -08:00
Lisa Du
3e90844662 drivers: android: correct the size of struct binder_uintptr_t for BC_DEAD_BINDER_DONE
commit 7a64cd887f upstream.

There's one point was missed in the patch commit da49889deb ("staging:
binder: Support concurrent 32 bit and 64 bit processes."). When configure
BINDER_IPC_32BIT, the size of binder_uintptr_t was 32bits, but size of
void * is 64bit on 64bit system. Correct it here.

Signed-off-by: Lisa Du <cldu@marvell.com>
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Fixes: da49889deb ("staging: binder: Support concurrent 32 bit and 64 bit processes.")
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:10 -08:00
Bjørn Mork
80d0fecf76 USB: option: add "4G LTE usb-modem U901"
commit d061c1caa3 upstream.

Thomas reports:

T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=05c6 ProdID=6001 Rev=00.00
S:  Manufacturer=USB Modem
S:  Product=USB Modem
S:  SerialNumber=1234567890ABCDEF
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

Reported-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:10 -08:00
Andrey Skvortsov
aed4333616 USB: option: add support for SIM7100E
commit 3158a8d416 upstream.

$ lsusb:
Bus 001 Device 101: ID 1e0e:9001 Qualcomm / Option

$ usb-devices:
T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=101 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  2
P:  Vendor=1e0e ProdID=9001 Rev= 2.32
S:  Manufacturer=SimTech, Incorporated
S:  Product=SimTech, Incorporated
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)

The last interface (6) is used for Android Composite ADB interface.

Serial port layout:
0: QCDM/DIAG
1: NMEA
2: AT
3: AT/PPP
4: audio

Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:10 -08:00
Ken Lin
a9d2586256 USB: cp210x: add IDs for GE B650V3 and B850V3 boards
commit 6627ae1938 upstream.

Add USB ID for cp2104/5 devices on GE B650v3 and B850v3 boards.

Signed-off-by: Ken Lin <ken.lin@advantech.com.tw>
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:10 -08:00
John Youn
e8d634243d usb: dwc3: Fix assignment of EP transfer resources
commit c450960187 upstream.

The assignement of EP transfer resources was not handled properly in the
dwc3 driver. Commit aebda61871 ("usb: dwc3: Reset the transfer
resource index on SET_INTERFACE") previously fixed one aspect of this
where resources may be exhausted with multiple calls to SET_INTERFACE.
However, it introduced an issue where composite devices with multiple
interfaces can be assigned the same transfer resources for different
endpoints. This patch solves both issues.

The assignment of transfer resources cannot perfectly follow the data
book due to the fact that the controller driver does not have all
knowledge of the configuration in advance. It is given this information
piecemeal by the composite gadget framework after every
SET_CONFIGURATION and SET_INTERFACE. Trying to follow the databook
programming model in this scenario can cause errors. For two reasons:

1) The databook says to do DEPSTARTCFG for every SET_CONFIGURATION and
SET_INTERFACE (8.1.5). This is incorrect in the scenario of multiple
interfaces.

2) The databook does not mention doing more DEPXFERCFG for new endpoint
on alt setting (8.1.6).

The following simplified method is used instead:

All hardware endpoints can be assigned a transfer resource and this
setting will stay persistent until either a core reset or hibernation.
So whenever we do a DEPSTARTCFG(0) we can go ahead and do DEPXFERCFG for
every hardware endpoint as well. We are guaranteed that there are as
many transfer resources as endpoints.

This patch triggers off of the calling dwc3_gadget_start_config() for
EP0-out, which always happens first, and which should only happen in one
of the above conditions.

Fixes: aebda61871 ("usb: dwc3: Reset the transfer resource index on SET_INTERFACE")
Reported-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:10 -08:00
Gerhard Uttenthaler
f847ff0db6 can: ems_usb: Fix possible tx overflow
commit 90cfde4658 upstream.

This patch fixes the problem that more CAN messages could be sent to the
interface as could be send on the CAN bus. This was more likely for slow baud
rates. The sleeping _start_xmit was woken up in the _write_bulk_callback. Under
heavy TX load this produced another bulk transfer without checking the
free_slots variable and hence caused the overflow in the interface.

Signed-off-by: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:10 -08:00
Nikolay Borisov
5c8a03a351 dm thin: fix race condition when destroying thin pool workqueue
commit 18d03e8c25 upstream.

When a thin pool is being destroyed delayed work items are
cancelled using cancel_delayed_work(), which doesn't guarantee that on
return the delayed item isn't running.  This can cause the work item to
requeue itself on an already destroyed workqueue.  Fix this by using
cancel_delayed_work_sync() which guarantees that on return the work item
is not running anymore.

Fixes: 905e51b39a ("dm thin: commit outstanding data every second")
Fixes: 85ad643b7e ("dm thin: add timeout to stop out-of-data-space mode holding IO forever")
Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:10 -08:00
Kent Overstreet
a556b804df bcache: Change refill_dirty() to always scan entire disk if necessary
commit 627ccd20b4 upstream.

Previously, it would only scan the entire disk if it was starting from
the very start of the disk - i.e. if the previous scan got to the end.

This was broken by refill_full_stripes(), which updates last_scanned so
that refill_dirty was never triggering the searched_from_start path.

But if we change refill_dirty() to always scan the entire disk if
necessary, regardless of what last_scanned was, the code gets cleaner
and we fix that bug too.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:09 -08:00
Stefan Bader
9e761c1b43 bcache: prevent crash on changing writeback_running
commit 8d16ce540c upstream.

Added a safeguard in the shutdown case. At least while not being
attached it is also possible to trigger a kernel bug by writing into
writeback_running. This change  adds the same check before trying to
wake up the thread for that case.

Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:09 -08:00
Gabriel de Perthuis
b38798df6c bcache: allows use of register in udev to avoid "device_busy" error.
commit d7076f2162 upstream.

Allows to use register, not register_quiet in udev to avoid "device_busy" error.
The initial patch proposed at https://lkml.org/lkml/2013/8/26/549 by Gabriel de Perthuis
<g2p.code@gmail.com> does not unlock the mutex and hangs the kernel.

See http://thread.gmane.org/gmane.linux.kernel.bcache.devel/2594 for the discussion.

Cc: Denis Bychkov <manover@gmail.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: Gabriel de Perthuis <g2p.code@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:09 -08:00
Zheng Liu
d81b4c865e bcache: unregister reboot notifier if bcache fails to unregister device
commit 2ecf0cdb2b upstream.

In bcache_init() function it forgot to unregister reboot notifier if
bcache fails to unregister a block device.  This commit fixes this.

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Tested-by: Joshua Schmid <jschmid@suse.com>
Tested-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 15:07:09 -08:00