Commit graph

79,465 commits

Author SHA1 Message Date
Olof Johansson
34edea7adc Merge branch 'tegra/dma-reset-rework' into next/soc
Bringing in the tegra dma/reset rework as a base for new SoC branches.

* tegra/dma-reset-rework: (81 commits)
  spi: tegra: checking for ERR_PTR instead of NULL
  ASoC: tegra: update module reset list for Tegra124
  clk: tegra: remove bogus PCIE_XCLK
  clk: tegra: remove legacy reset APIs
  ARM: tegra: remove legacy DMA entries from DT
  ARM: tegra: remove legacy clock entries from DT
  USB: EHCI: tegra: use reset framework
  Input: tegra-kbc - use reset framework
  serial: tegra: convert to standard DMA DT bindings
  serial: tegra: use reset framework
  spi: tegra: convert to standard DMA DT bindings
  spi: tegra: use reset framework
  staging: nvec: use reset framework
  i2c: tegra: use reset framework
  ASoC: tegra: convert to standard DMA DT bindings
  ASoC: tegra: allocate AHUB FIFO during probe() not startup()
  ASoC: tegra: call pm_runtime APIs around register accesses
  ASoC: tegra: use reset framework
  dma: tegra: register as an OF DMA controller
  dma: tegra: use reset framework
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-26 10:57:30 -08:00
Yang Yingliang
2e04ad424b sch_tbf: add TBF_BURST/TBF_PBURST attribute
When we set burst to 1514 with low rate in userspace,
the kernel get a value of burst that less than 1514,
which doesn't work.

Because it may make some loss when transform burst
to buffer in userspace. This makes burst lose some
bytes, when the kernel transform the buffer back to
burst.

This patch adds two new attributes to support sending
burst/mtu to kernel directly to avoid the loss.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26 13:54:22 -05:00
Olof Johansson
e7d248f0e0 ARM: tegra: implement common DMA and resets DT bindings
This series converts the Tegra DTs and drivers to use the common/
 standard DMA and reset bindings, rather than custom bindings. It also
 adds complete documentation for the Tegra clock bindings without
 actually changing any binding definitions.
 
 This conversion relies on a few sets of patches in branches from outside
 the Tegra tree:
 
 1) A patch to add an DMA channel request API which allows deferred probe
    to be implemented.
 
 2) A patch to implement a common part of the of_xlate function for DMA
    controllers.
 
 3) Some ASoC patches (which in turn rely on (1) above), which support
    deferred probe during DMA channel allocation.
 
 4) The Tegra clock driver changes for 3.14.
 
 Consequently, this branch is based on a merge of all of those external
 branches.
 
 In turn, this branch is or will be pulled into a few places that either
 rely on features introduced here, or would otherwise conflict with the
 patches:
 
 a) Tegra's own for-3.14/powergate and for-4.14/dt branches, to avoid
    conflicts.
 
 b) The DRM tree, which introduces new code that relies on the reset
    controller framework introduced in this branch, and to avoid
    conflicts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSr3AnAAoJEMzrak5tbycxfMwQAMeffTFreJqDiQ4Vj0XmuhSn
 RFlXiZQsWtQ6gGgNfKyDsXzDMaz1KDAabcUYRcZwrluxuSCPBcK1JirCj5R8uRY7
 LDZFX92CO8zRgiij0mhgokV4zzuEQ56q1uhPxqI3o+wG3v44jlMSMgFHQJUevdET
 aKr2Pss8Hb00XDztnpxprs6FUoU/W99NRH0i/5znbBwuHqYFP37zlKe2MRwbqDwR
 AMgkrnGoawe85Stz4p/iR9pCLpAMa0dH94V4JrAP4+IQrl0DEKWbrolpQHii4gzh
 NCGazMELTqkaZaorC/n1SmczH1kTj4vcjbbmeB8dwS8Vqhr+uf7W1oLlJ46TUOsp
 ESO0uD2GfpHKQQwLxEfgjfmwsIUMbdWHef8f2HUuvl6Js+LCpaPkxd52Pt/qL4sU
 0sKqTbldRZXzGhvwa0/MK32WhmH4v31s7IZAg5A2YxqDR6yWryl7legWyvrI96C0
 OlmVe1C/2NGk0QCfK0G/xTa9V7YzMfj8k4ICSZOgUoF4BeGGj6d3svWvLbKbbrU1
 0fVvR7aCm78pRXixI6kURpj9D0mEfqus9Hx7VoWcL0TS4QH2dSYlGI+jDCiliQmj
 +kWrZWHsASSvPmUZk4RBNaviCbnGU8/t5nNdJSdFIUM/PIswzZ4GaAu6gdVksIY8
 hcx410PyAzTZL2lENamE
 =8T7+
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.14-dmas-resets-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/cleanup

From Stephen Warren:
ARM: tegra: implement common DMA and resets DT bindings

This series converts the Tegra DTs and drivers to use the common/
standard DMA and reset bindings, rather than custom bindings. It also
adds complete documentation for the Tegra clock bindings without
actually changing any binding definitions.

This conversion relies on a few sets of patches in branches from outside
the Tegra tree:

1) A patch to add an DMA channel request API which allows deferred probe
   to be implemented.

2) A patch to implement a common part of the of_xlate function for DMA
   controllers.

3) Some ASoC patches (which in turn rely on (1) above), which support
   deferred probe during DMA channel allocation.

4) The Tegra clock driver changes for 3.14.

Consequently, this branch is based on a merge of all of those external
branches.

In turn, this branch is or will be pulled into a few places that either
rely on features introduced here, or would otherwise conflict with the
patches:

a) Tegra's own for-3.14/powergate and for-4.14/dt branches, to avoid
   conflicts.

b) The DRM tree, which introduces new code that relies on the reset
   controller framework introduced in this branch, and to avoid
   conflicts.

* tag 'tegra-for-3.14-dmas-resets-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (30 commits)
  spi: tegra: checking for ERR_PTR instead of NULL
  ASoC: tegra: update module reset list for Tegra124
  clk: tegra: remove bogus PCIE_XCLK
  clk: tegra: remove legacy reset APIs
  ARM: tegra: remove legacy DMA entries from DT
  ARM: tegra: remove legacy clock entries from DT
  USB: EHCI: tegra: use reset framework
  Input: tegra-kbc - use reset framework
  serial: tegra: convert to standard DMA DT bindings
  serial: tegra: use reset framework
  spi: tegra: convert to standard DMA DT bindings
  spi: tegra: use reset framework
  staging: nvec: use reset framework
  i2c: tegra: use reset framework
  ASoC: tegra: convert to standard DMA DT bindings
  ASoC: tegra: allocate AHUB FIFO during probe() not startup()
  ASoC: tegra: call pm_runtime APIs around register accesses
  ASoC: tegra: use reset framework
  dma: tegra: register as an OF DMA controller
  dma: tegra: use reset framework
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-26 10:33:05 -08:00
Olof Johansson
1c7af42fe5 Merge branches 'depends/asoc-dma', 'depends/dma-of' and 'depends/tegra-clk' into next/cleanup
Merging in external dependencies for the Tegra DMA and reset controller
refactoring from external trees.

Per Stephen Warren, the stability of these branches have been negotiated
with the relevant parties (Vinod/Mark/Mike)

* depends/asoc-dma:
  ASoC: dmaengine: fix deferred probe detection
  ASoC: dmaengine: support deferred probe for DMA channels
  dma: add channel request API that supports deferred probe
  ASoC: dmaengine: add custom DMA config to snd_dmaengine_pcm_config
  ASoC: don't leak on error in snd_dmaengine_pcm_register
  ASoC: restructure dmaengine_pcm_request_chan_of()
  ASoC: generic-dmaengine-pcm: Set BATCH flag when residue reporting is not supported
  ASoC: Add resource managed snd_dmaengine_pcm_register()

* depends/dma-of:
  dma: add dma_get_any_slave_channel(), for use in of_xlate()

* depends/tegra-clk: (42 commits)
  clk: tegra: fix __clk_lookup() return value checks
  clk: tegra: Do not print errors for clk_round_rate()
  clk: tegra: Initialize DSI low-power clocks
  clk: tegra: add FUSE clock device
  clk: tegra: Properly setup PWM clock on Tegra30
  clk: tegra: Initialize secondary gr3d clock on Tegra30
  clk: tegra114: Initialize clocks needed for HDMI
  clk: tegra124: add suspend/resume function for tegra_cpu_car_ops
  clk: tegra124: add wait_for_reset and disable_clock for tegra_cpu_car_ops
  clk: tegra124: Add support for Tegra124 clocks
  clk: tegra124: Add new peripheral clocks
  clk: tegra124: Add common clk IDs to clk-id.h
  clk: tegra: add TEGRA_PERIPH_NO_GATE
  clk: tegra: add locking to periph clks
  clk: tegra: Add periph regs bank X
  clk: tegra: Add support for PLLSS
  clk: tegra: move tegra20 to common infra
  clk: tegra: move tegra30 to common infra
  clk: tegra: introduce common gen4 super clock
  clk: tegra: move PMC, fixed clocks to common files
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-26 10:32:35 -08:00
Olof Johansson
509633c836 Linux 3.13-rc4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQEcBAABAgAGBQJSrhGrAAoJEHm+PkMAQRiGsNoH/jIK3CsQ2lbW7yRLXmfgtbzz
 i2Kep6D4SDvmaLpLYOVC8xNYTiE8jtTbSXHomwP5wMZ63MQDhBfnEWsEWqeZ9+D9
 3Q46p0QWuoBgYu2VGkoxTfygkT6hhSpwWIi3SeImbY4fg57OHiUil/+YGhORM4Qc
 K4549OCTY3sIrgmWL77gzqjRUo+pQ4C73NKqZ3+5nlOmYBZC1yugk8mFwEpQkwhK
 4NRNU760Fo+XIht/bINqRiPMddzC15p0mxvJy3cDW8bZa1tFSS9SB7AQUULBbcHL
 +2dFlFOEb5SV1sNiNPrJ0W+h2qUh2e7kPB0F8epaBppgbwVdyQoC2u4uuLV2ZN0=
 =lI2r
 -----END PGP SIGNATURE-----

Merge tag 'v3.13-rc4' into next/cleanup

Linux 3.13-rc4
2013-12-26 10:31:33 -08:00
stephen hemminger
652a4a53fc mdio: unused ethtool functions
Use it or lose it.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26 13:29:35 -05:00
Simon Horman
3effae8c26 Revert "ARM: shmobile: r8a7791: Add SSI clocks in device tree"
This reverts commit b652896b02.

Unfortunately this commit prevents multiplatform from booting to
the point where a serial console is available. Revert it while
a solution is sought.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-26 14:16:54 +09:00
Simon Horman
4d0810257a Revert "ARM: shmobile: r8a7790: Add SSI clocks in device tree"
This reverts commit 6dea2c1ebc.

Unfortunately this commit prevents multiplatform from booting to
the point where a serial console is available. Revert it while
a solution is sought.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-26 14:15:47 +09:00
Lad, Prabhakar
d3422a18db gpio: davinci: remove unused variable intc_irq_num
As the davinci-gpio driver is migrated to use irqdomain
there is no need to pass the irq base for the gpio driver.
This patch removes this variable from davinci_gpio_platform_data
and also the refrences from the machine file.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-12-26 00:02:11 +05:30
Lad, Prabhakar
9211ff3140 gpio: davinci: convert to use irqdomain support.
Convert the davinci gpio driver to use irqdomain support.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
[grygorii.strashko@ti.com:
 - switch to use one irq-domain per  all GPIO banks
 - keep irq_create_mapping() call in gpio_to_irq_banked() as it
   simply transformed to irq_find_mapping() if IRQ mapping exist
   already]
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-12-26 00:02:11 +05:30
Greg Kroah-Hartman
a6e8e3a470 2nd round of new IIO drivers, features and cleanups for the 3.14 cycle.
New drivers
 
 * HID inclinometer driver.
 
 * DHT11 humidity driver.  Note that previous humidity drivers have been in
   hwmon, but no one was ever entirely happy with that, and they should find
   a more comfortable home in IIO (their original placement in hwmon was my
   fault - oops).  As this is our first humidity driver, core support is also
   added.
 
 New features
 
 * Two of mxs-lradc channels are internally wired to a temperature sensor,
   make this explicit in the driver by providing the relevant temperature
   channel.
 
 * Add support for blocking IO on buffers.
 
 * Add a data_available call back to the interface between buffer implementations
   and the core.  This is much cleaner than the old, 'stufftoread' flag.
   Implemented in the kfifo buffer.
 
 Cleanups
 
 * Last user of the old event configuration interface is converted and the
   old interface dropped.  Nice to be rid of this thanks to Lars-Peter's hard
   work!
 
 * Replace all remaining instances of the IIO_ST macro with explicit filling
   of the scan_type structure within struct iio_chan_spec.  This macro was a
   bad idea, that rapidly ceased to cover all elements of the structure.
   Miss reading of the macro arguements has led to a number of bugs so lets
   just get rid of it. The final removal patch is awaiting for some fixes
   to make their way into mainline.
   In a couple of drivers, no elements of scan_type were even being used so
   in those case, it has been dropped entirely.
 
 * Drop a couple of of_match_ptr helper uses in drivers where devicetree is
   not optional and hence the structures being protected by this always exist.
 
 * Fix up some cases where data was read from a device in a particular
   byte order, but he code placed it into a s16 or similar.  These were
   highlighted by Sparse.
 
 * Use the new ATTRIBUTE_GROUPS macro to drop some boiler plate in the triggers
   core code.
 
 * ad7746 and ad7280a - stop storing buffers on the stack, giving cleaner code
   and possibly avoiding issues with i2c bus drivers that assume they can dma
   directly into the buffer.  Note that this cannot currently happen as the the
   i2c_smbus_read_i2c_block_data function has a memcpy from the buffer actually
   passed to the bus driver.  I missed this element of the commit message
   and don't think it is major enough to rebase the iio tree.
 
 * ad5791 and ad5504 stop storing buffers on the stack for an SPI driver.
   Unlike the i2c drivers, this is a real issue for SPI drivers which can dma
   directly into the buffer supplied.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJStyIbAAoJEFSFNJnE9BaI1goQAL0hKYCYuIl3d1fAy65u2I4h
 5mzJs/oJmomq/4BqAopfEQ8CbhZhksAYoR4JndOzZH7n4jVY/fRgyY/bH/Ymj0oI
 OpCtfee6IeeBLA0p8CMeEPem/pnwxRhSDzul9jsiwpTrTRKAIC1BPZwrmLpaoUfc
 obD8r1ocVZStzfsYBr3DUwkcIpcTQTCVy/Pl8HoKLKKsdYoFhTpNwEHJFOoZdiFi
 KKGRkeL9Q8VRWt/otWU0L0VFGZFwI1PWlxrqnbisVcGwSs8FF4wGcQvijfC0mUMg
 BdKDM7J4GrourZhj3og566B/8WMtGo6YTJXAe/QvvPp768rQncccDHem4V0Tnu49
 OJbjgD4ZGVXt3uBFaYddBIbMEIB8SfA2VYur/MW3gnZ7saSAtDk6TllsvC6CxIkR
 +LOOxWylhEGeJFIjyMrFPqRVhrrRNkuDRxPz8ZGTiDc8ovo6DWuTLsJrLSX8EJyZ
 O6TN6EEk8TCJaf8V63uTFW0Dlom4IQHyQei6LKhfhzwUQq/ri0esBp5P8lGzI3Uq
 wtOSdCDuYyoUEYPYbwjohFmQJ27w1rx9KcS4Y9BGmhTIRXslUg3hr+wA/gKMSDZ0
 /AUkLQajcv9otupfGzsp5mIWkthKKsGt/Y50xc5zIodnFtnM3nQGq4AqlP6t8nzP
 jucVwVMQLj5KaNH13P6K
 =Whfv
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-3.14b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

2nd round of new IIO drivers, features and cleanups for the 3.14 cycle.

New drivers

* HID inclinometer driver.

* DHT11 humidity driver.  Note that previous humidity drivers have been in
  hwmon, but no one was ever entirely happy with that, and they should find
  a more comfortable home in IIO (their original placement in hwmon was my
  fault - oops).  As this is our first humidity driver, core support is also
  added.

New features

* Two of mxs-lradc channels are internally wired to a temperature sensor,
  make this explicit in the driver by providing the relevant temperature
  channel.

* Add support for blocking IO on buffers.

* Add a data_available call back to the interface between buffer implementations
  and the core.  This is much cleaner than the old, 'stufftoread' flag.
  Implemented in the kfifo buffer.

Cleanups

* Last user of the old event configuration interface is converted and the
  old interface dropped.  Nice to be rid of this thanks to Lars-Peter's hard
  work!

* Replace all remaining instances of the IIO_ST macro with explicit filling
  of the scan_type structure within struct iio_chan_spec.  This macro was a
  bad idea, that rapidly ceased to cover all elements of the structure.
  Miss reading of the macro arguements has led to a number of bugs so lets
  just get rid of it. The final removal patch is awaiting for some fixes
  to make their way into mainline.
  In a couple of drivers, no elements of scan_type were even being used so
  in those case, it has been dropped entirely.

* Drop a couple of of_match_ptr helper uses in drivers where devicetree is
  not optional and hence the structures being protected by this always exist.

* Fix up some cases where data was read from a device in a particular
  byte order, but he code placed it into a s16 or similar.  These were
  highlighted by Sparse.

* Use the new ATTRIBUTE_GROUPS macro to drop some boiler plate in the triggers
  core code.

* ad7746 and ad7280a - stop storing buffers on the stack, giving cleaner code
  and possibly avoiding issues with i2c bus drivers that assume they can dma
  directly into the buffer.  Note that this cannot currently happen as the the
  i2c_smbus_read_i2c_block_data function has a memcpy from the buffer actually
  passed to the bus driver.  I missed this element of the commit message
  and don't think it is major enough to rebase the iio tree.

* ad5791 and ad5504 stop storing buffers on the stack for an SPI driver.
  Unlike the i2c drivers, this is a real issue for SPI drivers which can dma
  directly into the buffer supplied.
2013-12-24 10:30:57 -08:00
Greg Kroah-Hartman
99f14bd4d1 Merge 3.13-rc5 into usb-next
This resolves the merge issue with drivers/usb/host/ohci-at91.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-24 10:18:03 -08:00
Greg Kroah-Hartman
b86b75ec57 Merge 3.13-rc5 into tty-next
We need the tty fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-24 10:10:47 -08:00
Greg Kroah-Hartman
912cbd4952 Merge 3.13-rc5 into staging-next
This resolves a merge issue with drivers/staging/imx-drm/imx-drm-core.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-24 10:06:37 -08:00
Linus Torvalds
f6398600f9 Merge branch 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu fix from Tejun Heo:
 "A single commit to fix a spurious sparse warning coming from
  DEFINE_PER_CPU()'s hack to support the use of weak symbols.  Shouldn't
  cause observable behavior change"

* 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: fix spurious sparse warnings from DEFINE_PER_CPU()
2013-12-24 09:48:43 -08:00
Greg Kroah-Hartman
5bd2010fbe Merge 3.13-rc5 into staging-next
We want these fixes here to handle some merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-24 09:43:21 -08:00
Linus Torvalds
4b69316ede Merge branch 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
 "There's one interseting commit - "libata, freezer: avoid block device
  removal while system is frozen".  It's an ugly hack working around a
  deadlock condition between driver core resume and block layer device
  removal paths through freezer which was made more reproducible by
  writeback being converted to workqueue some releases ago.  The bug has
  nothing to do with libata but it's just an workaround which is easy to
  backport.  After discussion, Rafael and I seem to agree that we don't
  really need kernel freezables - both kthread and workqueue.  There are
  few specific workqueues which constitute PM operations and require
  freezing, which will be converted to use workqueue_set_max_active()
  instead.  All other kernel freezer uses are planned to be removed,
  followed by the removal of kthread and workqueue freezer support,
  hopefully.

  Others are device-specific fixes.  The most notable is the addition of
  NO_NCQ_TRIM which is used to disable queued TRIM commands to Micro
  M500 SSDs which otherwise suffers data corruption"

* 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata, freezer: avoid block device removal while system is frozen
  libata: implement ATA_HORKAGE_NO_NCQ_TRIM and apply it to Micro M500 SSDs
  libata: disable a disk via libata.force params
  ahci: bail out on ICH6 before using AHCI BAR
  ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN
  libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8
2013-12-24 09:35:58 -08:00
Ard Biesheuvel
f60900f260 auxvec.h: account for AT_HWCAP2 in AT_VECTOR_SIZE_BASE
Commit 2171364d1a ("powerpc: Add HWCAP2 aux entry") introduced a new
AT_ auxv entry type AT_HWCAP2 but failed to update AT_VECTOR_SIZE_BASE
accordingly.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: 2171364d1a (powerpc: Add HWCAP2 aux entry)
Cc: stable@vger.kernel.org
Acked-by: Michael Neuling <michael@neuling.org>
Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-24 09:35:17 -08:00
Laurent Pinchart
b652896b02 ARM: shmobile: r8a7791: Add SSI clocks in device tree
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24 23:01:13 +09:00
Laurent Pinchart
6dea2c1ebc ARM: shmobile: r8a7790: Add SSI clocks in device tree
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24 23:01:13 +09:00
Laurent Pinchart
ec71f55216 ARM: shmobile: r8a7791: Add QSPI module clock in device tree
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24 23:01:12 +09:00
Laurent Pinchart
91b56ca10a ARM: shmobile: r8a7790: Add QSPI module clock in device tree
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24 23:01:12 +09:00
Laurent Pinchart
cded80f869 ARM: shmobile: r8a7791: Add MSIOF clocks in device tree
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24 23:01:11 +09:00
Laurent Pinchart
9d90951a39 ARM: shmobile: r8a7790: Add MSIOF clocks in device tree
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24 23:01:11 +09:00
Wenyou Yang
33036f48d1 regulator: act8865: add PMIC act8865 driver
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-24 13:47:40 +00:00
Laurent Pinchart
89b5c1ab94 serial: sh-sci: Remove platform data mapbase and irqs fields
The fields are not used anymore by board files, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24 21:50:54 +09:00
Laurent Pinchart
878fbb9139 serial: sh-sci: Remove platform data scbrr_algo_id field
The field isn't set by any board, remote it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24 21:50:54 +09:00
Simon Horman
e62db3848c Merge branch 'sh-sci' into soc3-base 2013-12-24 21:08:27 +09:00
fan.du
6a649f3398 netfilter: add IPv4/6 IPComp extension match support
With this plugin, user could specify IPComp tagged with certain
CPI that host not interested will be DROPped or any other action.

For example:
iptables  -A INPUT -p 108 -m ipcomp --ipcompspi 0x87 -j DROP
ip6tables -A INPUT -p 108 -m ipcomp --ipcompspi 0x87 -j DROP

Then input IPComp packet with CPI equates 0x87 will not reach
upper layer anymore.

Signed-off-by: Fan Du <fan.du@windriver.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-12-24 12:37:58 +01:00
Sebastian Reichel
34a109610e isp1704_charger: Add DT support
This patch introduces device tree support to the isp1704 charger driver.
Adding support involved moving the handling of the enable GPIO from board
code into the driver.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23 18:34:58 -08:00
Sebastian Reichel
abce97708a power_supply: Add power_supply_get_by_phandle
Add method to get power supply by device tree phandle.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23 18:21:11 -08:00
Laurent Pinchart
ec09c5eb49 serial: sh-sci: Rework baud rate calculation
Computing the baud rate register value requires knowledge of the
hardware sampling rate. This information is currently encoded in a baud
rate calculation algorithm ID passed through platform data. However, it
can be derived from the port type directly in most cases.

Compute the sampling rate internally in the driver if the baud rate
calculation algorithm ID isn't specified, and allow platforms to
override the sampling rate through platform data in special cases (this
is only required for SCIFA ports on sh7723 and sh7724, the reason needs
to be investigated).

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24 11:17:53 +09:00
Laurent Pinchart
520402bbc6 serial: sh-sci: Remove unused GPIO request code
The driver requests at initialization time GPIOs passed through platform
data. No platform makes use of this feature, remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24 11:17:50 +09:00
Laurent Pinchart
3ae988d97b serial: sh-sci: Move overrun_bit and error_mask fields out of pdata
None of the fields is ever set by board code, and both of them are set
in the driver at probe time. Move them out of struct plat_sci_port to
struct sci_port.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24 11:17:48 +09:00
Laurent Pinchart
1fcc91a607 serial: sh-sci: Support resources passed through platform resources
Memory and IRQ resources are currently passed to the driver through
platform data. Support passing them through the standard platform
resources mechanism instead. This deprecates platform data resources.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24 11:17:44 +09:00
Laurent Pinchart
6557b1f69e serial: sh-sci: Simplify baud rate calculation algorithms
Rewrite the baud rate register value calculations in easier to read
forms. The computed value isn't modified.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24 11:17:33 +09:00
Laurent Pinchart
6db201da25 serial: sh-sci: Remove baud rate calculation algorithm 5
The algorithm isn't used, remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24 11:17:30 +09:00
Pali Rohár
32260308b4 bq2415x_charger: Use power_supply notifier for automode
This patch removing set_mode_hook function from board data and replacing
it with new string variable of notifier power supply device. After this
change it is possible to add DT support because driver does not need
specific board function anymore. Only static data and name of power supply
device is required.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23 17:58:03 -08:00
Linus Torvalds
6961bc6c70 Last batch of InfiniBand/RDMA changes for 3.13 / 2014:
- Additional checks for uverbs to ensure forward compatibility, handle
    malformed input better.
  - Fix potential use-after-free in iWARP connection manager.
  - Make a function static.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABCAAGBQJSuHFcAAoJEENa44ZhAt0hetAP/2lMjThZ/dK/Q4eyGXr86qQ6
 ygjFc26H7SPEqZ2cjmcm0mgObHhVj4+94YiJDcemHpjwfzLhhZywZxjySTTJdKna
 ZSzmSb8si0KNdPAoEdldPmtmO04oTI0+mz7kK2sz9mbn033xDVcJ24M8jSUy6/dl
 KBmYWCaiE6rabSyvRNwXOIFilj5RwomQFZzJMjg9JGvWY5qpmwKbcvVdZMCSzAwS
 VsZ2Z5UEDaghsGtnYjKQzvR1TDGeq6XyWtR4rfjCH19U6rUcInbA1oZFDWcOqE3C
 r/o9jOCUszAVefG3iPX5PJ+A3kKCHB2lcDK9owfoIM/cLfV8KWBFkp0WouD5wiGr
 8sfENcKI7aMq+Rptsa24FDNkJVCcdG1HhribRqWY/mn4CwI4c3Qe+5s4x+kgHnxU
 VngX/Hp54lw+pnrgWWrKCT5tFVuDgdVhHqyYLabtnKrCHIPsb2Eqp8Kaz2JPNLkI
 OYWOcS17wzg7nAPoiqbMVfWInGmziqOpWqVZkFwZ+EBTfJIjE7td+Mxn46PzKsrO
 gbVYifn+q5cToDGwmK4pn14G1Xh45tqYW/P3KfZNwyGB6+Ui7u18Q5/epp8BHIWy
 8bn3jTcJzBIMlOmFxqirrJ2OixaeAWJhZjgAMJIA3So9MHwmhbkJfgo0J+S6jLnI
 p1WRy0kTmPC5NNX21YN8
 =bol6
 -----END PGP SIGNATURE-----

Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

Pull infiniband fixes from Roland Dreier:
 "Last batch of InfiniBand/RDMA changes for 3.13 / 2014:
   - Additional checks for uverbs to ensure forward compatibility,
     handle malformed input better.
   - Fix potential use-after-free in iWARP connection manager.
   - Make a function static"

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/uverbs: Check access to userspace response buffer in extended command
  IB/uverbs: Check input length in flow steering uverbs
  IB/uverbs: Set error code when fail to consume all flow_spec items
  IB/uverbs: Check reserved fields in create_flow
  IB/uverbs: Check comp_mask in destroy_flow
  IB/uverbs: Check reserved field in extended command header
  IB/uverbs: New macro to set pointers to NULL if length is 0 in INIT_UDATA()
  IB/core: const'ify inbuf in struct ib_udata
  RDMA/iwcm: Don't touch cm_id after deref in rem_ref
  RDMA/cxgb4: Make _c4iw_write_mem_dma() static
2013-12-23 17:23:42 -08:00
Jonghwa Lee
856ee6115e charger-manager: Support deivce tree in charger manager driver
Charger-manager can parse charger_desc data from devicetree which is used
to register charger manager.

Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23 17:10:07 -08:00
Jonghwa Lee
5c49a6256b charger-manager: Modify the way of checking battery's temperature
Charger-manager driver used to check battery temperature through the
callback function passed by platform data. Unfortunatley, without that
pre-defined callback function, charger-manager can't get battery's
temperature at all. Also passing callback function through platform data
ruins DT support for charger-manager.

This patch mondifies charger-manager driver to get temperature of battery
without pre-defined callback function. Now, charger-manager can use either
of battery thermometer in fuel-gauge and ouside of battery. It uses
thermal framework interface for outer thermometer if thermal fw is
enabled. Otherwise, it tries to use fuel-gauge's through the power supply
interface.

Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23 17:09:09 -08:00
Matt Porter
8feed347d3 phy: add phy_get_bus_width()/phy_set_bus_width() calls
This adds a pair of APIs that allows the generic PHY subsystem to
provide information on the PHY bus width. The PHY provider driver may
use phy_set_bus_width() to set the bus width that the PHY supports.
The controller driver may then use phy_get_bus_width() to fetch the
PHY bus width in order to properly configure the controller.

Signed-off-by: Matt Porter <mporter@linaro.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-23 14:26:17 -06:00
Felipe Balbi
e90b8417af Linux 3.13-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQEcBAABAgAGBQJSt1TYAAoJEHm+PkMAQRiGvWgH/iWg8TmEWz4KUKuHthuUi0uh
 9+2YDN+4k577Xa0obaG24giQeqkCdxMr3oJrS3FO9jeAmaNRHEGhxUPneisb7RtN
 9jIVsz5bPa9/DcK9nqtaUQdvA0O5AWTE6AAPmwleTVy+8CygBo987T2uGELnQCSR
 FrKCrMePc7Pj0uthMVXrpJ17Ffm/j7jkfRtPhrxHJyngh3jEux+tPbpynH/aKuO2
 47unsSQimoFk7n2SPFvNu3E/vZE2xVbu5SH9MCl5yyiCifFjpi3B71LV/FW51lvm
 cK8Jzn2BmYDygRFjnZfq4zJHqYJCBHzpjCLWmR37Dm/JS91aGq3+Cg0stDP8UTs=
 =+Hcn
 -----END PGP SIGNATURE-----

Merge tag 'v3.13-rc5' into next

Linux 3.13-rc5

* tag 'v3.13-rc5': (231 commits)
  Linux 3.13-rc5
  aio: clean up and fix aio_setup_ring page mapping
  aio/migratepages: make aio migrate pages sane
  aio: fix kioctx leak introduced by "aio: Fix a trinity splat"
  Don't set the INITRD_COMPRESS environment variable automatically
  mm: fix build of split ptlock code
  pstore: Don't allow high traffic options on fragile devices
  mm: do not allocate page->ptl dynamically, if spinlock_t fits to long
  mm: page_alloc: revert NUMA aspect of fair allocation policy
  Revert "mm: page_alloc: exclude unreclaimable allocations from zone fairness policy"
  mm: Fix NULL pointer dereference in madvise(MADV_WILLNEED) support
  qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure
  target: Remove extra percpu_ref_init
  arm64: ptrace: avoid using HW_BREAKPOINT_EMPTY for disabled events
  ARC: Allow conditional multiple inclusion of uapi/asm/unistd.h
  target/file: Update hw_max_sectors based on current block_size
  iser-target: Move INIT_WORK setup into isert_create_device_ib_res
  iscsi-target: Fix incorrect np->np_thread NULL assignment
  mm/hugetlb: check for pte NULL pointer in __page_check_address()
  fix build with make 3.80
  ...

Conflicts:
	drivers/usb/phy/Kconfig
2013-12-23 11:22:46 -06:00
Marek Olšák
439a1cfffe drm/radeon: expose render backend mask to the userspace
This will allow userspace to correctly program the PA_SC_RASTER_CONFIG
register, so it can be considered a fix.

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-12-23 10:03:43 -05:00
Alex Deucher
d00adcc8ae drm/radeon: 0x9649 is SUMO2 not SUMO
Fixes rendering corruption due to incorrect
gfx configuration.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=63599

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2013-12-23 10:03:41 -05:00
Boris BREZILLON
0903ea6017 clk: add accuracy support for fixed clock
This patch adds support for accuracy retrieval on fixed clocks.
It also adds a new dt property called 'clock-accuracy' to define the clock
accuracy.

This can be usefull for oscillator (RC, crystal, ...) definitions which are
always given an accuracy characteristic.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-12-22 23:14:28 -08:00
Boris BREZILLON
5279fc402a clk: add clk accuracy retrieval support
The clock accuracy is expressed in ppb (parts per billion) and represents
the possible clock drift.
Say you have a clock (e.g. an oscillator) which provides a fixed clock of
20MHz with an accuracy of +- 20Hz. This accuracy expressed in ppb is
20Hz/20MHz = 1000 ppb (or 1 ppm).

Clock users may need the clock accuracy information in order to choose
the best clock (the one with the best accuracy) across several available
clocks.

This patch adds clk accuracy retrieval support for common clk framework by
means of a new function called clk_get_accuracy.
This function returns the given clock accuracy expressed in ppb.

In order to get the clock accuracy, this implementation adds one callback
called recalc_accuracy to the clk_ops structure.
This callback is given the parent clock accuracy (if the clock is not a
root clock) and should recalculate the given clock accuracy.

This callback is optional and may be implemented if the clock is not
a perfect clock (accuracy != 0 ppb).

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-12-22 23:14:27 -08:00
Jaegeuk Kim
93dfe2ac51 f2fs: refactor bio-related operations
This patch integrates redundant bio operations on read and write IOs.

1. Move bio-related codes to the top of data.c.
2. Replace f2fs_submit_bio with f2fs_submit_merged_bio, which handles read
   bios additionally.
3. Introduce __submit_merged_bio to submit the merged bio.
4. Change f2fs_readpage to f2fs_submit_page_bio.
5. Introduce f2fs_submit_page_mbio to integrate previous submit_read_page and
   submit_write_page.

Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com >
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:18:05 +09:00
Huajun Li
1001b3479c f2fs: add flags and helpers to support inline data
Add new inode flags F2FS_INLINE_DATA and FI_INLINE_DATA to indicate
whether the inode has inline data.

Inline data makes use of inode block's data indices region to save small
file. Currently there are 923 data indices in an inode block. Since
inline xattr has made use of the last 50 indices to save its data, there
are 873 indices left which can be used for inline data. When
FI_INLINE_DATA is set, the layout of inode block's indices region is
like below:

+-----------------+
|                 | Reserved. reserve_new_block() will make use of
| i_addr[0]       | i_addr[0] when we need to reserve a new data block
|                 | to convert inline data into regular one's.
|-----------------|
|                 | Used by inline data. A file whose size is less than
| i_addr[1~872]   | 3488 bytes(~3.4k) and doesn't reserve extra
|                 | blocks by fallocate() can be saved here.
|-----------------|
|                 |
| i_addr[873~922] | Reserved for inline xattr
|                 |
+-----------------+

Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:18:03 +09:00
Jaegeuk Kim
a709f4a2f2 f2fs: add detailed information of bio types in the tracepoints
This patch inserts information of bio types in more detail.
So, we can now see REQ_META and REQ_PRIO too.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:18:03 +09:00