Pull drm fixes from Dave Airlie:
"A bunch of fixes covering i915, amdgpu, one tegra and some core DRM
ones. Nothing too strange at this point"
* tag 'drm-fixes-for-4.8-rc4' of git://people.freedesktop.org/~airlied/linux: (21 commits)
drm/atomic: Don't potentially reset color_mgmt_changed on successive property updates.
drm: Protect fb_defio in drivers with CONFIG_KMS_FBDEV_EMULATION
drm/amdgpu: skip TV/CV in display parsing
drm/amdgpu: avoid a possible array overflow
drm/amdgpu: fix lru size grouping v2
drm/tegra: dsi: Enhance runtime power management
drm/i915: Fix botched merge that downgrades CSR versions.
drm/i915/skl: Ensure pipes with changed wms get added to the state
drm/i915/gen9: Only copy WM results for changed pipes to skl_hw
drm/i915/skl: Add support for the SAGV, fix underrun hangs
drm/i915/gen6+: Interpret mailbox error flags
drm/i915: Reattach comment, complete type specification
drm/i915: Unconditionally flush any chipset buffers before execbuf
drm/i915/gen9: Drop invalid WARN() during data rate calculation
drm/i915/gen9: Initialize intel_state->active_crtcs during WM sanitization (v2)
drm: Reject page_flip for !DRIVER_MODESET
drm/amdgpu: fix timeout value check in amd_sched_job_recovery
drm/amdgpu: fix sdma_v2_4_ring_test_ib
drm/amdgpu: fix amdgpu_move_blit on 32bit systems
drm/radeon: fix radeon_move_blit on 32bit systems
...
Due to assigning the 'replaced' value instead of or'ing it,
if drm_atomic_crtc_set_property() gets called multiple times,
the last call will define the color_mgmt_changed flag, so
a non-updating call to a property can reset the flag and
prevent actual hw state updates required by preceding
property updates.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: <stable@vger.kernel.org> # v4.6+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pull irq fixes from Thomas Gleixner:
"This lot provides:
- plug a hotplug race in the new affinity infrastructure
- a fix for the trigger type of chained interrupts
- plug a potential memory leak in the core code
- a few fixes for ARM and MIPS GICs"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips-gic: Implement activate op for device domain
irqchip/mips-gic: Cleanup chip and handler setup
genirq/affinity: Use get/put_online_cpus around cpumask operations
genirq: Fix potential memleak when failing to get irq pm
irqchip/gicv3-its: Disable the ITS before initializing it
irqchip/gicv3: Remove disabling redistributor and group1 non-secure interrupts
irqchip/gic: Allow self-SGIs for SMP on UP configurations
genirq: Correctly configure the trigger on chained interrupts
Pull timer fixes from Thomas Gleixner:
"A few updates for timers & co:
- prevent a livelock in the timekeeping code when debugging is
enabled
- prevent out of bounds access in the timekeeping debug code
- various fixes in clocksource drivers
- a new maintainers entry"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/sun4i: Clear interrupts after stopping timer in probe function
drivers/clocksource/pistachio: Fix memory corruption in init
clocksource/drivers/timer-atmel-pit: Enable mck clock
clocksource/drivers/pxa: Fix include files for compilation
MAINTAINERS: Add ARM ARCHITECTED TIMER entry
timekeeping: Cap array access in timekeeping_debug
timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING
- Minor fixes to cxgb4
- Minor fixes to mlx4
- One minor fix each to core, rxe, isert, srpt, mlx5, ocrdma, and usnic
- Six or so fixes to i40iw fixes
- The rest are hfi1 fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Mdb6
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Round one of 4.8 rc fixes.
This should be the bulk of the -rc fixes for 4.8. I only have a few
things that are still outstanding (two ipoib bugs for which the
solution is not yet fully known, and a few queued items that came in
after my last push and I didn't want to delay this pull request for
late comers again).
Even though the patch count is kind of high, everything is minor fixes
so the overall churn is pretty low.
Summary:
- minor fixes to cxgb4
- minor fixes to mlx4
- one minor fix each to core, rxe, isert, srpt, mlx5, ocrdma, and usnic
- six or so fixes to i40iw fixes
- the rest are hfi1 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (34 commits)
i40iw: Send last streaming mode message for loopback connections
IB/srpt: Update sport->port_guid with each port refresh
RDMA/ocrdma: Fix the max_sge reported from FW
i40iw: Avoid writing to freed memory
i40iw: Fix double free of allocated_buffer
IB/mlx5: Remove superfluous include of io-mapping.h
i40iw: Do not set self-referencing pointer to NULL after kfree
i40iw: Add missing NULL check for MPA private data
iw_cxgb4: Fix cxgb4 arm CQ logic w/IB_CQ_REPORT_MISSED_EVENTS
i40iw: Add missing check for interface already open
i40iw: Protect req_resource_num update
i40iw: Change mem_resources pointer to a u8
IB/core: Use memdup_user() rather than duplicating its implementation
IB/qib: Use memdup_user() rather than duplicating its implementation
iw_cxgb4: use the MPA initiator's IRD if < our ORD
iw_cxgb4: limit IRD/ORD advertised to ULP by device max.
IB/hfi1: Fix mm_struct use after free
IB/rdmvat: Fix double vfree() in rvt_create_qp() error path
IB/hfi1: Improve J_KEY generation
IB/hfi1: Return invalid field for non-QSFP CableInfo queries
...
didn't factor in expected 'drop_writes' behavior for read IO).
- A dm-log bio operation flags fix for the broader block changes that
were merged during the 4.8 merge window.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXwHX2AAoJEMUj8QotnQNaMdQIAJuCHedIKQxlsCH4BG20thwM
7+kPh68ZWOB5VYpVlm2sn0aJG0t2c2IsM2+AcQrwwcVsTjVkqu4s5XeqhBhkhvBE
xrRHdJU21K6ho3IFiMhscZYfhMGvptwddevOxnRLfCgBALTjWpCWCEeQWLe17QCt
klR0bvGckLp7dJavYmb/8MO7VqIQQufYCDjYqEdq4IQT+lKVf940X1bNx5+RpzAD
OCgFwmWFb1OWYsVKWnVqxL+QzQcIA84YpBMV+FKQSTDNTLYgDM1mPTxMOxVMCNLO
neCUh2WNetvoE9s69T/NmPkjzB3hNAmVhbuFT2SBJ7Bnf/lfxT4Zc6WYOeqqWKY=
=XAfD
-----END PGP SIGNATURE-----
Merge tag 'dm-4.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- another stable fix for DM flakey (that tweaks the previous fix that
didn't factor in expected 'drop_writes' behavior for read IO).
- a dm-log bio operation flags fix for the broader block changes that
were merged during the 4.8 merge window.
* tag 'dm-4.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm log: fix unitialized bio operation flags
dm flakey: fix reads to be issued if drop_writes configured
From Will Deacon:
* Fix a couple of thinkos in the CMDQ error handling and
short-descriptor page table code that have been there since
day one
* Disable stalling faults, since they may result in hardware
deadlock
* Fix an accidental BUG() when passing disable_bypass=1 on
the cmdline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=XLo2
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"Fixes from Will Deacon:
- fix a couple of thinkos in the CMDQ error handling and
short-descriptor page table code that have been there since day one
- disable stalling faults, since they may result in hardware deadlock
- fix an accidental BUG() when passing disable_bypass=1 on the
cmdline"
* tag 'iommu-fixes-v4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/arm-smmu: Don't BUG() if we find aborting STEs with disable_bypass
iommu/arm-smmu: Disable stalling faults for all endpoints
iommu/arm-smmu: Fix CMDQ error handling
iommu/io-pgtable-arm-v7s: Fix attributes when splitting blocks
Pull block fixes from Jens Axboe:
"Here's a set of block fixes for the current 4.8-rc release. This
contains:
- a fix for a secure erase regression, from Adrian.
- a fix for an mmc use-after-free bug regression, also from Adrian.
- potential zero pointer deference in bdev freezing, from Andrey.
- a race fix for blk_set_queue_dying() from Bart.
- a set of xen blkfront fixes from Bob Liu.
- three small fixes for bcache, from Eric and Kent.
- a fix for a potential invalid NVMe state transition, from Gabriel.
- blk-mq CPU offline fix, preventing us from issuing and completing a
request on the wrong queue. From me.
- revert two previous floppy changes, since they caused a user
visibile regression. A better fix is in the works.
- ensure that we don't send down bios that have more than 256
elements in them. Fixes a crash with bcache, for example. From
Ming.
- a fix for deferencing an error pointer with cgroup writeback.
Fixes a regression. From Vegard"
* 'for-linus' of git://git.kernel.dk/linux-block:
mmc: fix use-after-free of struct request
Revert "floppy: refactor open() flags handling"
Revert "floppy: fix open(O_ACCMODE) for ioctl-only open"
fs/block_dev: fix potential NULL ptr deref in freeze_bdev()
blk-mq: improve warning for running a queue on the wrong CPU
blk-mq: don't overwrite rq->mq_ctx
block: make sure a big bio is split into at most 256 bvecs
nvme: Fix nvme_get/set_features() with a NULL result pointer
bdev: fix NULL pointer dereference
xen-blkfront: free resources if xlvbd_alloc_gendisk fails
xen-blkfront: introduce blkif_set_queue_limits()
xen-blkfront: fix places not updated after introducing 64KB page granularity
bcache: pr_err: more meaningful error message when nr_stripes is invalid
bcache: RESERVE_PRIO is too small by one when prio_buckets() is a power of two.
bcache: register_bcache(): call blkdev_put() when cache_alloc() fails
block: Fix race triggered by blk_set_queue_dying()
block: Fix secure erase
nvme: Prevent controller state invalid transition
The data offset for a dax region needs to account for a reservation in
the resource range. Otherwise, device-dax is allowing mappings directly
into the memmap or device-info-block area with crash signatures like the
following:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: get_zone_device_page+0x11/0x30
Call Trace:
follow_devmap_pmd+0x298/0x2c0
follow_page_mask+0x275/0x530
__get_user_pages+0xe3/0x750
__gfn_to_pfn_memslot+0x1b2/0x450 [kvm]
tdp_page_fault+0x130/0x280 [kvm]
kvm_mmu_page_fault+0x5f/0xf0 [kvm]
handle_ept_violation+0x94/0x180 [kvm_intel]
vmx_handle_exit+0x1d3/0x1440 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0x81d/0x16a0 [kvm]
kvm_vcpu_ioctl+0x33c/0x620 [kvm]
do_vfs_ioctl+0xa2/0x5d0
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x1a/0xa4
Fixes: ab68f26221 ("/dev/dax, pmem: direct access to persistent memory")
Link: http://lkml.kernel.org/r/147205536732.1606.8994275381938837346.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Abhilash Kumar Mulumudi <m.abhilash-kumar@hpe.com>
Reported-by: Toshi Kani <toshi.kani@hpe.com>
Tested-by: Toshi Kani <toshi.kani@hpe.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The bootloader (U-boot) sometimes uses this timer for various delays.
It uses it as a ongoing counter, and does comparisons on the current
counter value. The timer counter is never stopped.
In some cases when the user interacts with the bootloader, or lets
it idle for some time before loading Linux, the timer may expire,
and an interrupt will be pending. This results in an unexpected
interrupt when the timer interrupt is enabled by the kernel, at
which point the event_handler isn't set yet. This results in a NULL
pointer dereference exception, panic, and no way to reboot.
Clear any pending interrupts after we stop the timer in the probe
function to avoid this.
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Driver init code incorrectly uses the block base address and as a result
clears clocksource structure's fields instead of the hardware registers.
Commit 09a9982016 ("timekeeping: Lift clocksource cacheline
restriction") has changed the offsets within pistachio_clocksource
structure and what has previously gone unnoticed now leads to a kernel
panic during boot.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
mck is needed to get the PIT working. Explicitly prepare_enable it instead
of assuming it is enabled.
This solves an issue where the system is freezing when the ETM/ETB drivers
are enabled.
Reported-by: Olivier Schonken <olivier.schonken@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
We call mmc_req_is_special() after having processed a request, but
it could be freed after that. Check that ahead of time, and use
the cached value.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Fixes: c2df40dfb8 ("drivers: use req op accessor")
Signed-off-by: Jens Axboe <axboe@fb.com>
i915 fixes queue.
* tag 'drm-intel-fixes-2016-08-25' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Fix botched merge that downgrades CSR versions.
drm/i915/skl: Ensure pipes with changed wms get added to the state
drm/i915/gen9: Only copy WM results for changed pipes to skl_hw
drm/i915/skl: Add support for the SAGV, fix underrun hangs
drm/i915/gen6+: Interpret mailbox error flags
drm/i915: Reattach comment, complete type specification
drm/i915: Unconditionally flush any chipset buffers before execbuf
drm/i915/gen9: Drop invalid WARN() during data rate calculation
drm/i915/gen9: Initialize intel_state->active_crtcs during WM sanitization (v2)
For reasons that entirely elude me fb.h exposes all the structures,
even when it is not enabled. Except for special stuff like fb_defio.
Which means all the drivers which haven't yet switched over to the
defio support in the helpers and still roll their own, will fail
to compile when fbdev emulation is disabled. Protect just those
bits, as a gnarly reminder that conversion to the core defio helpers
would be good.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-6-git-send-email-daniel.vetter@ffwll.ch
Signed-off-by: Dave Airlie <airlied@redhat.com>
Send a zero length last streaming mode message for loopback
connections to synchronize between accepting QP and connecting QP.
This avoids data transfer to start on the accepting QP before
the connecting QP is in RTS. Also remove function i40iw_loopback_nop()
as it is no longer used.
Fixes: f27b4746f3 ("i40iw: add connection management code")
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pull thermal fixes from Zhang Rui:
- Fix cpu_cooling to have separate thermal_cooling_device_ops
structures for cpus with and without power model, to avoid NULL
dereference in cpufreq_state2power. From Brendan Jackman.
- Fix a possible NULL dereference in imx_thermal driver. From Corentin
LABBE.
- Another two trivial fixes, one typo fix and one deleting module
owner. From Caesar Wang and Markus Elfring.
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: imx: fix a possible NULL dereference
thermal: trivial: fix the typo
Thermal-INT3406: Delete owner assignment
thermal: cpu_cooling: Fix NULL dereference in cpufreq_state2power
radeon and amdgpu fixes for 4.8. Nothing major:
- fix a performance regression due to the LRU changes in 4.7
- 32 bit fixes
- fix a PLL regression
- misc bug fixes
* 'drm-fixes-4.8' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: skip TV/CV in display parsing
drm/amdgpu: avoid a possible array overflow
drm/amdgpu: fix lru size grouping v2
drm/amdgpu: fix timeout value check in amd_sched_job_recovery
drm/amdgpu: fix sdma_v2_4_ring_test_ib
drm/amdgpu: fix amdgpu_move_blit on 32bit systems
drm/radeon: fix radeon_move_blit on 32bit systems
drm/radeon: only apply the SS fractional workaround to RS[78]80
This contains one fix for DSI runtime power management support that was
introduced in v4.8-rc1. This is slightly more elaborate than I would've
wished, but there are a few corner cases that needed fixing.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lyq1
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.8-rc4' of git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v4.8-rc4
This contains one fix for DSI runtime power management support that was
introduced in v4.8-rc1. This is slightly more elaborate than I would've
wished, but there are a few corner cases that needed fixing.
* tag 'drm/tegra/for-4.8-rc4' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: dsi: Enhance runtime power management
Commit e6047149db ("dm: use bio op accessors") switched DM over to
using bio_set_op_attrs() but didn't take care to initialize
lc->io_req.bi_op_flags in dm-log.c:rw_header(). This caused
rw_header()'s call to dm_io() to make bio->bi_op_flags be uninitialized
in dm-io.c:do_region(), which ultimately resulted in a SCSI BUG() in
sd_init_command().
Also, adjust rw_header() and its callers to use REQ_OP_{READ|WRITE}.
Fixes: e6047149db ("dm: use bio op accessors")
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
v4.8-rc3 commit 99f3c90d0d ("dm flakey: error READ bios during the
down_interval") overlooked the 'drop_writes' feature, which is meant to
allow reads to be issued rather than errored, during the down_interval.
Fixes: 99f3c90d0d ("dm flakey: error READ bios during the down_interval")
Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
If port_guid is set with the default subnet_prefix, then we get a change
event and run a port refresh, we don't update the port_guid. As a
result, attempts to create a target device that uses the new
subnet_prefix in the wwn will fail to find a match and be rejected by
the ib_srpt driver. This makes it impossible to configure a port if it
was initialized with a default subnet_prefix and later changed to any
non-default subnet-prefix. Updating the port refresh task to always
update the wwn based upon the current subnext_prefix solves this
problem.
Cc: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: nab@linux-iscsi.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
- Fix a regression in the xenbus device preventing userspace tools
from working.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXvdugAAoJEFxbo/MsZsTRAwEH/AiKLV4T0OiARv/df827WVnL
obUmEAh/wVSWZh2xdUNurDOH64lEfeBDSBIpGPQMLGmXLzNEQO9u8ZJYWJ7R1Ryp
JU37lu3DP7HqQqTXsy8ltgcBkwVaQZAo0GRtDeua80ZPdjulnZirwHWS48TuNIFF
pVtW4Eoy1BNAVri55o5hOIub4HUKMRoNB/J+o+SKLyJEvOon+qD4pOfIhR3sqeja
oYVX7QpY/4Miymd5uI9v8LUefS4PW/U58a7tjr414Ng4mzQbZOHDmNyWF0CH27lj
INAmgMXDG7RtiSQMWPKtDQUvuefApKoeRmFr6mQ/xHyCX3cAzOw07+p0rKacCig=
=PTX1
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.8b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen regression fix from David Vrabel:
"Fix a regression in the xenbus device preventing userspace tools from
working"
* tag 'for-linus-4.8b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: change the type of xen_vcpu_id to uint32_t
xenbus: don't look up transaction IDs for ordinary writes
When looking up the connector type make sure the index
is valid. Avoids a later crash if we read past the end
of the array.
Workaround for bug:
https://bugs.freedesktop.org/show_bug.cgi?id=97460
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This should really only be done for XS_TRANSACTION_END messages, or
else at least some of the xenstore-* tools don't work anymore.
Fixes: 0beef634b8 ("xenbus: don't BUG() on user mode induced condition")
Reported-by: Richard Schütz <rschuetz@uni-koblenz.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Richard Schütz <rschuetz@uni-koblenz.de>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Current driver is reporting wrong values for max_sge and
max_sge_rd in query_device. This breaks the nfs rdma and iser
in some device profiles. Fixing the driver to report
correct values from FW.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
iwpbl->iwmr points to the structure that contains iwpbl,
which is iwmr. Setting this to NULL would result in
writing to freed memory. So just free iwmr, and return.
Fixes: d374984179 ("i40iw: add files for iwarp interface")
Reported-by: Stefan Assmann <sassmann@redhat.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Memory allocated for iwqp; iwqp->allocated_buffer is freed twice in
the create_qp error path. Correct this by having it freed only once in
i40iw_free_qp_resources().
Fixes: d374984179 ("i40iw: add files for iwarp interface")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This file does not use any structs or functions defined by io-mapping.h
(nor does it directly use iomap, ioremap, iounamp or friends). Remove it
to simplify verification of changes to io-mapping.h
The include existed since its inception in
commit e126ba97db
Author: Eli Cohen <eli@mellanox.com>
Date: Sun Jul 7 17:25:49 2013 +0300
mlx5: Add driver for Mellanox Connect-IB adapters
which looks like a copy across from the Mellanox ethernet driver.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Eli Cohen <eli@mellanox.com>
Cc: Jack Morgenstein <jackm@dev.mellanox.co.il>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Matan Barak <matanb@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: linux-rdma@vger.kernel.org
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In i40iw_free_virt_mem(), do not set mem->va to NULL
after freeing it as mem->va is a self-referencing pointer
to mem.
Fixes: 4e9042e647 ("i40iw: add hw and utils files")
Reported-by: Stefan Assmann <sassmann@redhat.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add NULL check for pdata and pdata->addr before the memcpy in
i40iw_form_cm_frame(). This fixes a NULL pointer de-reference
which occurs when the MPA private data pointer is NULL. Also
only copy pdata->size bytes in the memcpy to prevent reading
past the length of the private data buffer provided by upper layer.
Fixes: f27b4746f3 ("i40iw: add connection management code")
Reported-by: Stefan Assmann <sassmann@redhat.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Adding a BO can make it the insertion point for larger sizes as well.
v2: add a comment about the guard structure.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
nvme_set_features() callers seem to expect that passing NULL as the
result pointer is acceptable. Teach nvme_set_features() not to try to
write to the NULL address.
For symmetry, make the same change to nvme_get_features(), despite the
fact that all current callers pass a valid result pointer.
I assume that this bug hasn't been reported in practice because
the callers that pass NULL are all in the SCSI translation layer
and no one uses the relevant operations.
Cc: stable@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The MIPI DSI output on Tegra SoCs requires some external logic to
calibrate the MIPI pads before a video signal can be transmitted. This
MIPI calibration logic requires to be powered on while the MIPI pads are
being used, which is currently done as part of the DSI driver's probe
implementation.
This is suboptimal because it will leave the MIPI calibration logic
powered up even if the DSI output is never used.
On Tegra114 and earlier this behaviour also causes the driver to hang
while trying to power up the MIPI calibration logic because the power
partition that contains the MIPI calibration logic will be powered on
by the display controller at output pipeline configuration time. Thus
the power up sequence for the MIPI calibration logic happens before
it's power partition is guaranteed to be enabled.
Fix this by splitting up the API into a request/free pair of functions
that manage the runtime dependency between the DSI and the calibration
modules (no registers are accessed) and a set of enable, calibrate and
disable functions that program the MIPI calibration logic at points in
time where the power partition is really enabled.
While at it, make sure that the runtime power management also works in
ganged mode, which is currently also broken.
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Tested-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This includes a single bugfix for vhost-scsi.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXvFsZAAoJECgfDbjSjVRpa0wIAJIiod8E6IShhSlMxF4cymyX
4XVIp/FDpaHE4jSVgWYX8uz4ZUC+49LHH9uM0bpH+EKxaatH+711krql+9cgxKaC
Jqq2kRlhfPxqcAadI4jKeeIFpk0WkBNkjyidZckpN/Ot4awAr0tjkJcK/mFGAN4p
j1ER8Y2AnAYaozly4Uz6FLgko8E0omRvdm9iY2TlV2WBUOy+UkIUPXsGGGsC1/Ws
2AjMQYrW9sfX0K9ZRu1h22PTq2jPN7901/HauKWCuqhlwjMGM4fP3DQNOdmnvOHV
moRRMMoxPwO9DNXnGep5agOknxijui8dWkxqjdeeIuagOPQE19bCRRalfEBWsr0=
=iYHw
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull vhost bugfix from Michael Tsirkin:
"This includes a single bugfix for vhost-scsi"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost/scsi: fix reuse of &vq->iov[out] in response
We get 1 warning about global functions without a declaration in the
clocksource/drivers/pxa driver when building with W=1:
drivers/clocksource/pxa_timer.c:221:13: warning: no previous prototype for 'pxa_timer_nodt_init' [-Wmissing-prototypes]
void __init pxa_timer_nodt_init(int irq, void __iomem *base,
In fact, this function is declared in pxa.h, so this patch
add missing header dependencies.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: daniel.lezcano@linaro.org
Cc: xie.baoyou@zte.com.cn
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1471965569-4104-1-git-send-email-baoyou.xie@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Current cxgb4 arm CQ logic ignores IB_CQ_REPORT_MISSED_EVENTS for
request completion notification on a CQ. Due to this ib_poll_handler()
assumes all events polled and avoids further iopoll scheduling.
This patch adds logic to cxgb4 ib_req_notify_cq() handler to check if
CQ is not empty and return accordingly. Based on the return value of
ib_req_notify_cq() handler, ib_poll_handler() will schedule a run of
iopoll handler.
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In i40iw_open(), check if interface is already open
and return success if it is.
Fixes: 8e06af711b ("i40iw: add main, hdr, status")
Reported-by: Stefan Assmann <sassmann@redhat.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In i40iw_alloc_resource(), ensure that the update to
req_resource_num is protected by the lock.
Fixes: 8e06af711b ("i40iw: add main, hdr, status")
Reported-by: Stefan Assmann <sassmann@redhat.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
iwdev->mem_resources is incorrectly defined as an unsigned
long instead of u8. As a result, the offset into the dynamic
allocated structures in i40iw_initialize_hw_resources() is
incorrectly calculated and would lead to writing of memory
regions outside of the allocated buffer.
Fixes: 8e06af711b ("i40iw: add main, hdr, status")
Reported-by: Stefan Assmann <sassmann@redhat.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Reuse existing functionality from memdup_user() instead of keeping
duplicate source code.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The address of the iovec &vq->iov[out] is not guaranteed to contain the scsi
command's response iovec throughout the lifetime of the command. Rather, it
is more likely to contain an iovec from an immediately following command
after looping back around to vhost_get_vq_desc(). Pass along the iovec
entirely instead.
Fixes: 79c14141a4 ("vhost/scsi: Convert completion path to use copy_to_iter")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This fixes a Kconfig issue with UM: when I made GPIOLIB
available to all archs, that included UM, but the OF part
of GPIOLIB requires HAS_IOMEM, so we add HAS_IOMEM as a
dependency to OF_GPIO.
This in turn exposed the fact that a few GPIO drivers were
implicitly assuming OF_GPIO as their dependency but instead
depended on OF alone (the typical problem being a pointer
inside gpio_chip not existing unless OF_GPIO is selected)
and then UM would fail to compile with these drivers
instead. Then I lost patience and made any GPIO driver
depending on just OF depend on OF_GPIO instead, that is
certainly what they meant and the only thing that makes
sense anyway. GPIO with just OF but !OF_GPIO does not make
sense.
Also a fix for the max730x driver data pointer, and a minor
comment fix for the GPIO tools.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=isIb
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here are a few GPIO fixes for v4.8.
I was expecting some fallout from the new chardev rework but nothing
like that turned up att all. Instead a Kconfig confusion that I think
I have finally nailed, then some ordinary driver noise and trivia.
This fixes a Kconfig issue with UM: when I made GPIOLIB available to
all archs, that included UM, but the OF part of GPIOLIB requires
HAS_IOMEM, so we add HAS_IOMEM as a dependency to OF_GPIO.
This in turn exposed the fact that a few GPIO drivers were implicitly
assuming OF_GPIO as their dependency but instead depended on OF alone
(the typical problem being a pointer inside gpio_chip not existing
unless OF_GPIO is selected) and then UM would fail to compile with
these drivers instead. Then I lost patience and made any GPIO driver
depending on just OF depend on OF_GPIO instead, that is certainly what
they meant and the only thing that makes sense anyway. GPIO with just
OF but !OF_GPIO does not make sense.
Also a fix for the max730x driver data pointer, and a minor comment
fix for the GPIO tools"
* tag 'gpio-v4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: make any OF dependent driver depend on OF_GPIO
gpio: Fix OF build problem on UM
gpio: max730x: set gpiochip data pointer before using it
tools/gpio: fix gpio-event-mon header comment
