commit 735bb39ca3 upstream.
With gcc-7, I got a new warning for this driver:
wilc1000/linux_wlan.c: In function 'wilc_netdev_cleanup':
wilc1000/linux_wlan.c:1224:15: error: 'vif[1]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
wilc1000/linux_wlan.c:1224:15: error: 'vif[0]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
A closer look at the function reveals that it's more complex than
it needs to be, given that based on how the device is created
we always get
netdev_priv(vif->ndev) == vif
Based on this assumption, I found a few other places in the same file
that can be simplified. That code appears to be a relic from times
when the assumption above was not valid.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cef988642c upstream.
Comedi's read and write file operation handlers (`comedi_read()` and
`comedi_write()`) currently call `copy_to_user()` or `copy_from_user()`
whilst in the `TASK_INTERRUPTIBLE` state, which falls foul of the
`might_fault()` checks when enabled. Fix it by setting the current task
state back to `TASK_RUNNING` a bit earlier before calling these
functions.
Reported-by: Piotr Gregor <piotrgregor@rsyncme.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 105967ad68 upstream.
gcc-7 points out an older regression:
drivers/staging/iio/resolver/ad2s1210.c: In function 'ad2s1210_read_raw':
drivers/staging/iio/resolver/ad2s1210.c:515:42: error: '<<' in boolean context, did you mean '<' ? [-Werror=int-in-bool-context]
The original code had 'unsigned short' here, but incorrectly got
converted to 'bool'. This reverts the regression and uses a normal
type instead.
Fixes: 29148543c5 ("staging:iio:resolver:ad2s1210 minimal chan spec conversion.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf279ece37 upstream.
Move comedi_proc_init to the end to avoid orphaned proc entry
if module loading failed.
Signed-off-by: Cheah Kok Cheong <thrust73@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 566e1ce22e upstream.
We now get a helpful warning for code that calls copy_{from,to}_iter
without checking the return value, introduced by commit aa28de275a
("iov_iter/hardening: move object size checks to inlined part").
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c: In function 'kiblnd_send':
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:1643:2: error: ignoring return value of 'copy_from_iter', declared with attribute warn_unused_result [-Werror=unused-result]
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c: In function 'kiblnd_recv':
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:1744:3: error: ignoring return value of 'copy_to_iter', declared with attribute warn_unused_result [-Werror=unused-result]
In case we get short copies here, we may get incorrect behavior.
I've added failure handling for both rx and tx now, returning
-EFAULT as expected.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 740c433ec3 upstream.
If vesafb is enabled in the config then /dev/fb0 is created by vesa
and this sm750 driver gets fb1, fb2. But we need to be fb0 and fb1 to
effectively work with xorg.
So if it has been alloted fb1, then try to remove the other fb0.
In the previous send, why #ifdef is used was asked.
https://lkml.org/lkml/2017/6/25/57
Answered at: https://lkml.org/lkml/2017/6/25/69
Also pasting here for reference.
'Did a quick research into "why".
The patch d8801e4df9 ("x86/PCI: Set IORESOURCE_ROM_SHADOW only for the
default VGA device") has started setting IORESOURCE_ROM_SHADOW in flags
for a default VGA device and that is being done only for x86.
And so, we will need that #ifdef to check IORESOURCE_ROM_SHADOW as that
needs to be checked only for a x86 and not for other arch.'
Signed-off-by: Teddy Wang <teddy.wang@siliconmotion.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15d5193104 upstream.
As reported by Éric Piel on the Comedi mailing list (see
<https://groups.google.com/forum/#!topic/comedi_list/ueZiR7vTLOU/discussion>),
the analog output asynchronous commands are running too fast with a
period 50 ns shorter than it should be. This affects all boards with AO
command support that are supported by the "ni_pcimio", "ni_atmio", and
"ni_mio_cs" drivers.
This is a regression bug introduced by commit 080e6795cb ("staging:
comedi: ni_mio_common: Cleans up/clarifies ni_ao_cmd"), specifically,
this line in `ni_ao_cmd_set_update()`:
/* following line: N-1 per STC */
ni_stc_writel(dev, trigvar - 1, NISTC_AO_UI_LOADA_REG);
The `trigvar` variable value comes from a call to `ni_ns_to_timer()`
which converts a timer period in nanoseconds to a hardware divisor
value. The function already reduces the divisor by 1 as required by the
hardware, so the above line should not reduce it further by 1. Fix it
by replacing `trigvar` by `trigvar - 1` in the above line, and remove
the misleading comment.
Reported-by: Éric Piel <piel@delmic.com>
Fixes: 080e6795cb ("staging: comedi: ni_mio_common: Cleans up/clarifies ni_ao_cmd")
Cc: Éric Piel <piel@delmic.com>
Cc: Spencer E. Olson <olsonse@umich.edu>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9332e9ad0 upstream.
There is a clean-up bug in the core comedi module initialization
functions, `comedi_init()`. If the `comedi_num_legacy_minors` module
parameter is non-zero (and valid), it creates that many "legacy" devices
and registers them in SysFS. A failure causes the function to clean up
and return an error. Unfortunately, it fails to destroy the "comedi"
class that was created earlier. Fix it by adding a call to
`class_destroy(comedi_class)` at the appropriate place in the clean-up
sequence.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc32190f2c upstream.
The key table is not intialized correctly without this call.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf6c77323a upstream.
Standard deviation is calculated as the square root of the variance
where variance is the mean of sample_sum and length. Correct the
computation of statP->stddev in accordance to the proper calculation.
Fixes: 3c97c08b57 ("staging: iio: add TAOS tsl2x7x driver")
Reported-by: Abhiram Balasubramanian <abhiram@cs.utah.edu>
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 784047eb2d upstream.
The "len" could be as low as -14 so we should check for negatives.
Fixes: 9a7fe54ddc ("staging: r8188eu: Add source files for new driver - part 1")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f9f96fc10c ]
Due to an incorrect condition the last_la used for the initial attempt at
claiming a logical address could be wrong.
The last_la wasn't converted to a mask when ANDing with type2mask, so that
test was broken.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a33252e06 upstream.
lov_getstripe() calls set_fs(KERNEL_DS) so that it can handle a struct
lov_user_md pointer from user- or kernel-space. This changes the
behavior of copy_from_user() on SPARC and may result in a misaligned
access exception which in turn oopses the kernel. In fact the
relevant argument to lov_getstripe() is never called with a
kernel-space pointer and so changing the address limits is unnecessary
and so we remove the calls to save, set, and restore the address
limits.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/6150
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3221
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Li Wei <wei.g.li@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95d93e271d upstream.
TID 7 is a valid value for QoS IEEE 802.11e.
The switch statement that follows states 7 is valid.
Remove function IsACValid and use the default case to filter
invalid TIDs.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90be652c9f upstream.
EPROM_CMD is 2 byte aligned on PCI map so calling with rtl92e_readl
will return invalid data so use rtl92e_readw.
The device is unable to select the right eeprom type.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 867510bde1 upstream.
BSSIDR has two byte alignment on PCI ioremap correct the write
by swapping to 16 bits first.
This fixes a problem that the device associates fail because
the filter is not set correctly.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit baabd567f8 upstream.
The driver attempts to alter memory that is mapped to PCI device.
This is because tx_fwinfo_8190pci points to skb->data
Move the pci_map_single to when completed buffer is ready to be mapped with
psdec is empty to drop on mapping error.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ec04a4918 upstream.
The timer expiry routine `jr3_pci_poll_dev()` checks for expiry by
checking whether the absolute value of `jiffies` (stored in local
variable `now`) is greater than the expected expiry time in jiffy units.
This will fail when `jiffies` wraps around. Also, it seems to make
sense to handle the expiry one jiffy earlier than the current test. Use
`time_after_eq()` to check for expiry.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45292be0b3 upstream.
For some reason, the driver does not consider allocation of the
subdevice private data to be a fatal error when attaching the COMEDI
device. It tests the subdevice private data pointer for validity at
certain points, but omits some crucial tests. In particular,
`jr3_pci_auto_attach()` calls `jr3_pci_alloc_spriv()` to allocate and
initialize the subdevice private data, but the same function
subsequently dereferences the pointer to access the `next_time_min` and
`next_time_max` members without checking it first. The other missing
test is in the timer expiry routine `jr3_pci_poll_dev()`, but it will
crash before it gets that far.
Fix the bug by returning `-ENOMEM` from `jr3_pci_auto_attach()` as soon
as one of the calls to `jr3_pci_alloc_spriv()` returns `NULL`. The
COMEDI core will subsequently call `jr3_pci_detach()` to clean up.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b58f45c8fc upstream.
Make sure to deregister the USB driver before releasing the tty driver
to avoid use-after-free in the USB disconnect callback where the tty
devices are deregistered.
Fixes: 61e1210476 ("staging: gdm7240: adding LTE USB driver")
Cc: Won Kang <wkang77@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12ecd24ef9 upstream.
Since 4.9 mandated USB buffers be heap allocated this causes the driver
to fail.
Since there is a wide range of buffer sizes use kmemdup to create
allocated buffer.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05c0cf88be upstream.
Since 4.9 mandated USB buffers to be heap allocated. This causes
the driver to fail.
Create buffer for USB transfers.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f3445067d upstream.
The probe function is not marked __init, but some other functions
are. This leads to a warning on older compilers (e.g. gcc-4.3),
and can cause executing freed memory when built with those
compilers:
WARNING: drivers/staging/emxx_udc/emxx_udc.o(.text+0x2d78): Section mismatch in reference from the function nbu2ss_drv_probe() to the function .init.text:nbu2ss_drv_contest_init()
This removes the annotations.
Fixes: 33aa8d45a4 ("staging: emxx_udc: Add Emma Mobile USB Gadget driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c474b8579 upstream.
Conversion macros le16_to_cpu was removed and that caused new sparse warning
sparse output:
drivers/staging/wlan-ng/p80211netdev.c:241:44: warning: incorrect type in argument 2 (different base types)
drivers/staging/wlan-ng/p80211netdev.c:241:44: expected unsigned short [unsigned] [usertype] fc
drivers/staging/wlan-ng/p80211netdev.c:241:44: got restricted __le16 [usertype] fc
Fixes: 7ad8257234 ("staging:wlan-ng:Fix sparse warning")
Signed-off-by: Igor Pylypiv <igor.pylypiv@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c13990e35 upstream.
root_squash control got accidentally moved to sysfs instead of
debugfs, and the write side of it was also broken expecting a
userspace buffer.
It contains both uid and gid values in a single file, so debugfs
is a clear place for it.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Fixes: c948390f10 "fix inconsistencies of root squash feature"
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 97fbfef6bd upstream.
vfs_llseek will check whether the file mode has
FMODE_LSEEK, no return failure. But ashmem can be
lseek, so add FMODE_LSEEK to ashmem file.
Comment From Greg Hackmann:
ashmem_llseek() passes the llseek() call through to the backing
shmem file. 91360b02ab ("ashmem: use vfs_llseek()") changed
this from directly calling the file's llseek() op into a VFS
layer call. This also adds a check for the FMODE_LSEEK bit, so
without that bit ashmem_llseek() now always fails with -ESPIPE.
Fixes: 91360b02ab ("ashmem: use vfs_llseek()")
Signed-off-by: Shuxiao Zhang <zhangshuxiao@xiaomi.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e01700602 upstream.
gcc-7 detects that wlanhdr_to_ethhdr() in two drivers calls memcpy() with
a destination argument that an earlier function call may have set to NULL:
staging/rtl8188eu/core/rtw_recv.c: In function 'wlanhdr_to_ethhdr':
staging/rtl8188eu/core/rtw_recv.c:1318:2: warning: argument 1 null where non-null expected [-Wnonnull]
staging/rtl8712/rtl871x_recv.c: In function 'r8712_wlanhdr_to_ethhdr':
staging/rtl8712/rtl871x_recv.c:649:2: warning: argument 1 null where non-null expected [-Wnonnull]
I'm fixing this by adding a NULL pointer check and returning failure
from the function, which is hopefully already handled properly.
This seems to date back to when the drivers were originally added,
so backporting the fix to stable seems appropriate. There are other
related realtek drivers in the kernel, but none of them contain a
function with a similar name or produce this warning.
Fixes: 1cc18a22b9 ("staging: r8188eu: Add files for new driver - part 5")
Fixes: 2865d42c78 ("staging: r8712u: Add the new driver to the mainline kernel")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc7ffefdcc upstream.
This is unbreaking another of those "stealth" janitor
patches that got in and subtly broke some things.
sv_cpt_data is a pointer to pointer, so need to
dereference it twice to allocate the correct structure size.
Fixes: 9899cb68c6 ("Staging: lustre: rpc: Use sizeof type *pointer instead of sizeof type.")
CC: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33b8807a6f upstream.
The loopback driver allows the user to set a minimum delay of up to one
second to be inserted between test iterations (i.e. request
submissions). The delay is currently specified in microseconds and is
implemented using udelay.
Busy looping for long periods is not just anti-social; udelay must not
be used for delays longer than a few milliseconds due to the risk of
integer overflow.
Replace the broken udelay with a usleep_range with a 100 us range for
short delays (< 20 ms) and otherwise revert to using msleep.
Fixes: b36f04fa94 ("greybus: loopback: Convert thread delay to microseconds")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b17c1bba9c upstream.
When tearingdown timesync, and not in arche platform, the state platform
callback is not initialized. That will trigger the following NULL
dereferencing.
CallTrace:
? gb_timesync_platform_unlock_bus+0x11/0x20 [greybus]
gb_timesync_teardown+0x85/0xc0 [greybus]
gb_timesync_svc_remove+0xab/0x190 [greybus]
gb_svc_del+0x29/0x110 [greybus]
gb_hd_del+0x14/0x20 [greybus]
ap_disconnect+0x24/0x60 [gb_es2]
usb_unbind_interface+0x7a/0x2c0
__device_release_driver+0x96/0x150
device_release_driver+0x1e/0x30
bus_remove_device+0xe7/0x130
device_del+0x116/0x230
usb_disable_device+0x97/0x1f0
usb_disconnect+0x80/0x260
hub_event+0x5ca/0x10e0
process_one_work+0x126/0x3b0
worker_thread+0x55/0x4c0
? process_one_work+0x3b0/0x3b0
kthread+0xc4/0xe0
? kthread_park+0xb0/0xb0
ret_from_fork+0x22/0x30
So, fix that by adding checks before use the callback.
Fixes: 970dc85bd9 ("greybus: timesync: Add timesync core driver")
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eadf081146 upstream.
A bugfix removed the two callers of s5p_cec_runtime_suspend
and s5p_cec_runtime_resume, leading to the return of a harmless
warning that I had previously fixed in commit aee8937089
("[media] s5p_cec: mark suspend/resume as __maybe_unused"):
staging/media/s5p-cec/s5p_cec.c:234:12: error: ‘s5p_cec_runtime_suspend’ defined but not used [-Werror=unused-function]
staging/media/s5p-cec/s5p_cec.c:242:12: error: ‘s5p_cec_runtime_resume’ defined but not used [-Werror=unused-function]
This adds the __maybe_unused annotations to the function that
were not removed and that are now unused when CONFIG_PM
is disabled.
Fixes: 57b978ada0 ("[media] s5p-cec: fix system and runtime PM integration")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b321a38d24 upstream.
The oversampling ratio is controlled using the oversampling pins,
OS [2:0] with OS2 being the MSB control bit, and OS0 the LSB control
bit.
The gpio connected to the OS2 pin is not being set correctly, only OS0
and OS1 pins are being set. Fix the typo to allow proper control of the
oversampling pins.
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Fixes: b9618c0 ("staging: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4")
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7c9a3d9e4 upstream.
The Octeon driver calls into PHYLIB which now checks for
net_device->dev.parent, so make sure we do set it before calling into
any MDIO/PHYLIB related function.
Fixes: ec988ad78e ("phy: Don't increment MDIO bus refcount unless it's a different owner")
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 857a661020 upstream.
Commit 0557344e21 ("staging: comedi: ni_mio_common: fix local var for
32-bit read") changed the type of local variable `d` from `unsigned
short` to `unsigned int` to fix a bug introduced in
commit 9c340ac934 ("staging: comedi: ni_stc.h: add read/write
callbacks to struct ni_private") when reading AI data for NI PCI-6110
and PCI-6111 cards. Unfortunately, other parts of the function rely on
the variable being `unsigned short` when an offset value in local
variable `signbits` is added to `d` before writing the value to the
`data` array:
d += signbits;
data[n] = d;
The `signbits` variable will be non-zero in bipolar mode, and is used to
convert the hardware's 2's complement, 16-bit numbers to Comedi's
straight binary sample format (with 0 representing the most negative
voltage). This breaks because `d` is now 32 bits wide instead of 16
bits wide, so after the addition of `signbits`, `data[n]` ends up being
set to values above 65536 for negative voltages. This affects all
supported "E series" cards except PCI-6143 (and PXI-6143). Fix it by
ANDing the value written to the `data[n]` with the mask 0xffff.
Fixes: 0557344e21 ("staging: comedi: ni_mio_common: fix local var for 32-bit read")
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 655c4d442d upstream.
For NI M Series cards, the Comedi `insn_read` handler for the AI
subdevice is broken due to ANDing the value read from the AI FIFO data
register with an incorrect mask. The incorrect mask clears all but the
most significant bit of the sample data. It should preserve all the
sample data bits. Correct it.
Fixes: 817144ae7f ("staging: comedi: ni_mio_common: remove unnecessary use of 'board->adbits'")
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8cb86fd95 upstream.
James Simmons reports:
> The ldlm_pool field pl_recalc_time is set to the current
> monotonic clock value but the interval period is calculated
> with the wall clock. This means the interval period will
> always be far larger than the pl_recalc_period, which is
> just a small interval time period. The correct thing to
> do is to use monotomic clock current value instead of the
> wall clocks value when calculating recalc_interval_sec.
This broke when I converted the 32-bit get_seconds() into
ktime_get_{real_,}seconds() inconsistently. Either
one of those two would have worked, but mixing them
does not.
Staying with the original intention of the patch, this
changes the ktime_get_seconds() calls into ktime_get_real_seconds(),
using real time instead of mononic time.
Fixes: 8f83409cf2 ("staging/lustre: use 64-bit time for pl_recalc")
Reported-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd15dd6ef4 upstream.
I have been having a lot of unexplainable crashes in osc_lru_shrink
lately that I could not see a good explanation for and then I found
this patch that slip under the radar somehow that incorrectly
converted while loop for lru list iteration into
list_for_each_entry_safe totally ignoring that in the body of
the loop we drop spinlocks guarding this list and move list entries
around.
Not sure why it was not showing up right away, perhaps some of the
more recent LRU changes committed caused some extra pressure on this
code that finally highlighted the breakage.
Reverts: 8adddc36b1 ("staging: lustre: osc: Use list_for_each_entry_safe")
CC: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are a few small staging and iio driver fixes for reported issues.
The last one was cherry-picked from my -next branch to resolve a build
warning that Arnd fixed, in his quest to be able to turn
-Wmaybe-uninitialized back on again. That patch, and all of the others,
have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iFYEABECABYFAlgoPA4PHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspzgIAn0/6
6/P+FYstL3zexr0+xGqcHU/XAJ4p8HJjH9CX8SBHWaMa+KCyPQs6wQ==
=L1Nv
-----END PGP SIGNATURE-----
Merge tag 'staging-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Grek KH:
"Here are a few small staging and iio driver fixes for reported issues.
The last one was cherry-picked from my -next branch to resolve a build
warning that Arnd fixed, in his quest to be able to turn
-Wmaybe-uninitialized back on again. That patch, and all of the
others, have been in linux-next for a while with no reported issues"
* tag 'staging-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: maxim_thermocouple: detect invalid storage size in read()
staging: nvec: remove managed resource from PS2 driver
Revert "staging: nvec: ps2: change serio type to passthrough"
drivers: staging: nvec: remove bogus reset command for PS/2 interface
staging: greybus: arche-platform: fix device reference leak
staging: comedi: ni_tio: fix buggy ni_tio_clock_period_ps() return value
staging: sm750fb: Fix bugs introduced by early commits
iio: hid-sensors: Increase the precision of scale to fix wrong reading interpretation.
iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)
iio: st_sensors: fix scale configuration for h3lis331dl
staging: iio: ad5933: avoid uninitialized variable in error case
This basicly reverts commit e534f3e9 (staging:nvec: Introduce the use of
the managed version of kzalloc). Serio struct should never by managed
because it is refcounted. Doing so will lead to a double free oops on module
remove.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Fixes: e534f3e942 ("staging:nvec: Introduce the use of the managed version of kzalloc")
Cc: stable <stable@vger.kernel.org> # 3.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 36b30d6138.
This is necessary to detect paz00 (ac100) touchpad properly as one
speaking ETPS/2 protocol. Without it X.org's synaptics driver doesn't
work as the touchpad is detected as an ImPS/2 mouse instead.
Commit ec6184b1c7 changed the way
auto-detection is performed on ports marked as pass through and made the
issue apparent.
A pass through port is an additional PS/2 port used to connect a slave
device to a master device that is using PS/2 to communicate with the
host (so slave's PS/2 communication is tunneled over master's PS/2
link). "Synaptics PS/2 TouchPad Interfacing Guide" describes such a
setup (PS/2 PASS-THROUGH OPTION section).
Since paz00's embedded controller is not connected to a PS/2 port
itself, the PS/2 interface it exposes is not a pass-through one.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Fixes: 36b30d6138 ("staging: nvec: ps2: change serio type to passthrough")
Cc: stable <stable@vger.kernel.org> # 3.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This command was sent behind serio's back and the answer to it was
confusing atkbd probe function which lead to the elantech touchpad
getting detected as a keyboard.
To prevent this from happening just let every party do its part of the
job.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Cc: stable <stable@vger.kernel.org> # 3.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to drop the device reference taken by of_find_device_by_node()
before returning from arche_platform_change_state().
Note that this code is expected to be removed, but let's fix up the leak
nonetheless.
Fixes: 886aba558b ("greybus: arche-platform: Export fn to allow...")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`ni_tio_clock_period_ps()` used to return the clock period in
picoseconds, and had a `BUG()` call for invalid cases. It was changed
to pass the clock period back via a pointer parameter and return an
error for the invalid cases. Unfortunately the code to handle
user-specified clock sources with user-specified clock period is still
returning the clock period the old way, which can lead to the caller not
getting the clock period, or seeing an unexpected error. Fix it by
passing the clock period via the pointer parameter and returning `0`.
Fixes: b42ca86ad6 ("staging: comedi: ni_tio: remove BUG() checks for ni_tio_get_clock_src()")
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org> # 4.7+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Early commit 30ca5cb63c ("staging: sm750fb: change definition of
PANEL_PLANE_TL fields") and 27b047bbe1 ("staging: sm750fb: change
definition of PANEL_PLANE_BR fields") modify the register bit fields
definitions. But the modifications are wrong, because the bit mask of
"bit field 10:0" is not 0xeff, but 0x7ff. The wrong definition bugs
makes display very strange.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: stable <stable@vger.kernel.org> # 4.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Interestingly scale related fixes for accelerometers at both ends of
the range. Obviously more varied devices turning up than we've seen before!
* ad5933
- fix an uninitialized value in a return case that is winding up GCC.
* hid sensors
- missing pm function prevents hid rotations sensors from working on newer
ISH hubs (works by luck on older ones)
- increase of scale precision needed to fix a case where on a yoga 260
the reported scale is 0 (presumably a high precision but very low g sensor).
* st_sensors
- fix an issue seen with the hs3lis331dl where the range is much greater
than previous devices (100's of g) and hence the per bit scale is greater
than 1.
-----BEGIN PGP SIGNATURE-----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=KcFP
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-4.9b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Second set of IIO fixes for the 4.9 cycle.
Interestingly scale related fixes for accelerometers at both ends of
the range. Obviously more varied devices turning up than we've seen before!
* ad5933
- fix an uninitialized value in a return case that is winding up GCC.
* hid sensors
- missing pm function prevents hid rotations sensors from working on newer
ISH hubs (works by luck on older ones)
- increase of scale precision needed to fix a case where on a yoga 260
the reported scale is 0 (presumably a high precision but very low g sensor).
* st_sensors
- fix an issue seen with the hs3lis331dl where the range is much greater
than previous devices (100's of g) and hence the per bit scale is greater
than 1.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJYGZuzAAoJEAhfPr2O5OEVEakQAJKu+4OwrzoWajdIibR9IVpP
1gbwqAeTDp4XuHC4WyA8U3no3I5RG+moo4GNv87LNZ/H2ix1EGQn6IwbpYG0YmOB
wdcZ2WViLc4tEYN/Rn7slwjY32dNplra6xNNSb0JHOT5tp6YOCLljqApd9FBvP25
Yo10z0pRL78ce6VbXyDB5JuqUsjtHivzU45/O5M5giDFIngdqFuu0zneQeMbvulF
rCz6HSqNutFaeRMdnbP6f2Vtmd2QjeCY4aYg5kQLqWiuXsdMplp9uJkeYaDgccDp
TF9z33cJlmyPXY6/YH95yfca156EZIVco3yLnNp9Ehmr4S12NV0D3xMKCXPyucEJ
A6FH60zqxe3qUv7sPi6w4MM7ufgq3F/i33lhhDLsNjw0R8m7ijohfIj7HI84XC+z
Jjr44A/7p4hqbfvkBePyLHcqaglWnc0E6LnS7lUgJC4/h7z3H2DMoPaUwkjedAI6
ynd5Ikfw+VvI0UQFyVBBWfH+ol+6BP7QO3TmHES9zfbPNMfhXc3ON4sk9yBzY50S
cH6/TagQVmuk4zA457oAU+rrYR4g+di97Wk3AMi+gKGWu2qZmHE4Tv0gQsNHoPrK
06VD1Ur04khRR3tOQ/OqDMGNyLHbCMIMXeUYc363uZ6wrcmVF5caDZ3oy3i1LNNO
ZALCj0FYwNFmDs7+Ckmq
=MRLH
-----END PGP SIGNATURE-----
Merge tag 'media/v4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"A series of fixup patches meant to fix the usage of DMA on stack, plus
one warning fixup"
* tag 'media/v4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (32 commits)
[media] radio-bcm2048: don't ignore errors
[media] pctv452e: fix semicolon.cocci warnings
[media] flexcop-usb: don't use stack for DMA
[media] stk-webcam: don't use stack for DMA
[media] s2255drv: don't use stack for DMA
[media] cpia2_usb: don't use stack for DMA
[media] digitv: handle error code on RC query
[media] dw2102: return error if su3000_power_ctrl() fails
[media] nova-t-usb2: handle error code on RC query
[media] technisat-usb2: use DMA buffers for I2C transfers
[media] pctv452e: don't call BUG_ON() on non-fatal error
[media] pctv452e: don't do DMA on stack
[media] nova-t-usb2: don't do DMA on stack
[media] gp8psk: don't go past the buffer size
[media] gp8psk: don't do DMA on stack
[media] dtv5100: don't do DMA on stack
[media] dtt200u: handle USB control message errors
[media] dtt200u: don't do DMA on stack
[media] dtt200u-fe: handle errors on USB control messages
[media] dtt200u-fe: don't do DMA on stack
...
Here are some small staging and iio driver fixes for reported issues for
4.9-rc3. Nothing major, the "largest" being a lustre fix for a sysfs
file that was obviously wrong, and had never been tested, so it was
moved to debugfs as that is where it belongs. The others are small bug
fixes for reported issues with various staging or iio drivers.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iFYEABECABYFAlgU0N8PHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspB1IAmgP4
nFPbchXqe+xNl6X5P1jlyQYFAJ9f/RIpr0XPDi0Epto5YoO6cs1MDA==
=xyXG
-----END PGP SIGNATURE-----
Merge tag 'staging-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Here are some small staging and iio driver fixes for reported issues
for 4.9-rc3. Nothing major, the "largest" being a lustre fix for a
sysfs file that was obviously wrong, and had never been tested, so it
was moved to debugfs as that is where it belongs. The others are small
bug fixes for reported issues with various staging or iio drivers.
All have been in linux-next for a while with no reported issues"
* tag 'staging-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
greybus: fix a leak on error in gb_module_create()
greybus: es2: fix error return code in ap_probe()
greybus: arche-platform: Add missing of_node_put() in arche_platform_change_state()
staging: android: ion: Fix error handling in ion_query_heaps()
iio: accel: sca3000_core: avoid potentially uninitialized variable
iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value
staging/lustre/llite: Move unstable_stats from sysfs to debugfs
Staging: wilc1000: Fix kernel Oops on opening the device
staging: android/ion: testing the wrong variable
Staging: greybus: uart: Use gbphy_dev->dev instead of bundle->dev
Staging: greybus: gpio: Use gbphy_dev->dev instead of bundle->dev
iio: adc: ti-adc081c: Select IIO_TRIGGERED_BUFFER to prevent build errors
iio: maxim_thermocouple: Align 16 bit big endian value of raw reads
