commit a743bbeef2 upstream.
The warning below says it all:
BUG: using __this_cpu_read() in preemptible [00000000] code: swapper/0/1
caller is __this_cpu_preempt_check
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc8 #4
Call Trace:
dump_stack
check_preemption_disabled
? do_early_param
__this_cpu_preempt_check
arch_perfmon_init
op_nmi_init
? alloc_pci_root_info
oprofile_arch_init
oprofile_init
do_one_initcall
...
These accessors should not have been used in the first place: it is PPro so
no mixed silicon revisions and thus it can simply use boot_cpu_data.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Fix-creation-mandated-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Robert Richter <rric@kernel.org>
Cc: x86@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76ce7cfe35 upstream.
If the TSC has constant frequency then the delay calibration can be skipped
when it has been calibrated for a package already. This is checked in
calibrate_delay_is_known(), but that function is buggy in two aspects:
It returns 'false' if
(!tsc_disabled && !cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC)
which is obviously the reverse of the intended check and the check for the
sibling mask cannot work either because the topology links have not been
set up yet.
Correct the condition and move the call to set_cpu_sibling_map() before
invoking calibrate_delay() so the sibling check works correctly.
[ tglx: Rewrote changelong ]
Fixes: c25323c073 ("x86/tsc: Use topology functions")
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Cc: bob.picco@oracle.com
Cc: steven.sistare@oracle.com
Cc: daniel.m.jordan@oracle.com
Link: https://lkml.kernel.org/r/20171028001100.26603-1-pasha.tatashin@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6b03ab63b upstream.
When called from prom init code, ar7_gpio_init() will fail as it will
call gpiochip_add() which relies on a working kmalloc() to alloc
the gpio_desc array and kmalloc is not useable yet at prom init time.
Move ar7_gpio_init() to ar7_register_devices() (a device_initcall)
where kmalloc works.
Fixes: 14e85c0e69 ("gpio: remove gpio_descs global array")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Nicolas Schichan <nschichan@freebox.fr>
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17542/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e8c399a88 upstream.
Commit 6f542ebeae ("MIPS: Fix race on setting and getting
cpu_online_mask") effectively reverted commit 8f46cca1e6 ("MIPS: SMP:
Fix possibility of deadlock when bringing CPUs online") and thus has
reinstated the possibility of deadlock.
The commit was based on testing of kernel v4.4, where the CPU hotplug
core code issued a BUG() if the starting CPU is not marked online when
the boot CPU returns from __cpu_up. The commit fixes this race (in
v4.4), but re-introduces the deadlock situation.
As noted in the commit message, upstream differs in this area. Commit
8df3e07e7f ("cpu/hotplug: Let upcoming cpu bring itself fully up")
adds a completion event in the CPU hotplug core code, making this race
impossible. However, people were unhappy with relying on the core code
to do the right thing.
To address the issues both commits were trying to fix, add a second
completion event in the MIPS smp hotplug path. It removes the
possibility of a race, since the MIPS smp hotplug code now synchronises
both the boot and secondary CPUs before they return to the hotplug core
code. It also addresses the deadlock by ensuring that the secondary CPU
is not marked online before it's counters are synchronised.
This fix should also be backported to fix the race condition introduced
by the backport of commit 8f46cca1e6 ("MIPS: SMP: Fix possibility of
deadlock when bringing CPUs online"), through really that race only
existed before commit 8df3e07e7f ("cpu/hotplug: Let upcoming cpu
bring itself fully up").
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Fixes: 6f542ebeae ("MIPS: Fix race on setting and getting cpu_online_mask")
CC: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Patchwork: https://patchwork.linux-mips.org/patch/17376/
Signed-off-by: James Hogan <jhogan@kernel.org>
[jhogan@kernel.org: Backported 4.1..4.9]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f542ebeae upstream.
While testing cpu hoptlug (cpu down and up in loops) on kernel 4.4, it was
observed that occasionally check for cpu online will fail in kernel/cpu.c,
_cpu_up:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/kernel/cpu.c?h=v4.4.79#n485
518 /* Arch-specific enabling code. */
519 ret = __cpu_up(cpu, idle);
520
521 if (ret != 0)
522 goto out_notify;
523 BUG_ON(!cpu_online(cpu));
Reason is race between start_secondary and _cpu_up. cpu_callin_map is set
before cpu_online_mask. In __cpu_up, cpu_callin_map is waited for, but cpu
online mask is not, resulting in race in which secondary processor started
and set cpu_callin_map, but not yet set the online mask,resulting in above
BUG being hit.
Upstream differs in the area. cpu_online check is in bringup_wait_for_ap,
which is after cpu reached AP_ONLINE_IDLE,where secondary passed its start
function. Nonetheless, fix makes start_secondary safe and not depending on
other locks throughout the code. It protects as well against cpu_online
checks put in between sometimes in the future.
Fix this by moving completion after all flags are set.
Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16925/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a00eeede50 upstream.
If a secondary CPU failed to start, for any reason, the CPU requesting
the secondary to start would get stuck in the loop waiting for the
secondary to be present in the cpu_callin_map.
Rather than that, use a completion event to signal that the secondary
CPU has started and is waiting to synchronise counters.
Since the CPU presence will no longer be marked in cpu_callin_map,
remove the redundant test from arch_cpu_idle_dead().
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Qais Yousef <qsyousef@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14502/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a6cba1d94 upstream.
The default CM target field in the GCR_BASE register is encoded with 0
meaning memory & 1 being reserved. However the definitions we use for
those bits effectively get these two values backwards - likely because
they were copied from the definitions for the CM regions where the
target is encoded differently. This results in use setting up GCR_BASE
with the reserved target value by default, rather than targeting memory
as intended. Although we currently seem to get away with this it's not a
great idea to rely upon.
Fix this by changing our macros to match the documentated target values.
The incorrect encoding became used as of commit 9f98f3dd0c ("MIPS: Add
generic CM probe & access code") in the Linux v3.15 cycle, and was
likely carried forwards from older but unused code introduced by
commit 39b8d52542 ("[MIPS] Add support for MIPS CMP platform.") in the
v2.6.26 cycle.
Fixes: 9f98f3dd0c ("MIPS: Add generic CM probe & access code")
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Matt Redfearn <matt.redfearn@mips.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # v3.15+
Patchwork: https://patchwork.linux-mips.org/patch/17562/
Signed-off-by: James Hogan <jhogan@kernel.org>
[jhogan@kernel.org: Backported 3.15..4.13]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77238e76b9 upstream.
It seems that this is a typo error and the proper bit masking is
"RT | RS" instead of "RS | RS".
This issue was detected with the help of Coccinelle.
Fixes: d6b3314b49 ("MIPS: uasm: Add lh uam instruction")
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/17551/
Signed-off-by: James Hogan <jhogan@kernel.org>
[jhogan@kernel.org: Backported 3.16..4.12]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9dd05c700 upstream.
When CONFIG_DEBUG_USER is enabled, it's possible for a user to
deliberately trigger dump_instr() with a chosen kernel address.
Let's avoid problems resulting from this by using get_user() rather than
__get_user(), ensuring that we don't erroneously access kernel memory.
So that we can use the same code to dump user instructions and kernel
instructions, the common dumping code is factored out to __dump_instr(),
with the fs manipulated appropriately in dump_instr() around calls to
this.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5dfeaac15f upstream.
struct sha256_ctx_mgr allocated in sha256_mb_mod_init() via kzalloc()
and later passed in sha256_mb_flusher_mgr_flush_avx2() function where
instructions vmovdqa used to access the struct. vmovdqa requires
16-bytes aligned argument, but nothing guarantees that struct
sha256_ctx_mgr will have that alignment. Unaligned vmovdqa will
generate GP fault.
Fix this by replacing vmovdqa with vmovdqu which doesn't have alignment
requirements.
Fixes: a377c6b187 ("crypto: sha256-mb - submit/flush routines for AVX2")
Reported-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Tim Chen
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d041b55779 upstream.
struct sha1_ctx_mgr allocated in sha1_mb_mod_init() via kzalloc()
and later passed in sha1_mb_flusher_mgr_flush_avx2() function where
instructions vmovdqa used to access the struct. vmovdqa requires
16-bytes aligned argument, but nothing guarantees that struct
sha1_ctx_mgr will have that alignment. Unaligned vmovdqa will
generate GP fault.
Fix this by replacing vmovdqa with vmovdqu which doesn't have alignment
requirements.
Fixes: 2249cbb53e ("crypto: sha-mb - SHA1 multibuffer submit and flush routines for AVX2")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c4788950b upstream.
I recently encountered wreckage because access_ok() was used where it
should not be, add an explicit WARN when access_ok() is used wrongly.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b9ec866d22 ]
The clock parent was lower than child clock which is not correct.
In some use case, it leads to division by zero.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 90d08ba2b9 ]
On context switch with powerpc32, the cputime is accumulated in the
thread_info struct. So the switching-in task must move forward its
start time snapshot to the current time in order to later compute the
delta spent in system mode.
This is what we do for the normal cputime by initializing the starttime
field to the value of the previous task's starttime which got freshly
updated.
But we are missing the update of the scaled cputime start time. As a
result we may be accounting too much scaled cputime later.
Fix this by initializing the scaled cputime the same way we do for
normal cputime.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Link: http://lkml.kernel.org/r/1483636310-6557-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 68cc795d19 ]
The "topology=off" kernel parameter is supposed to prevent the kernel
to use hardware topology information to generate scheduling domains
etc.
For an unknown reason I implemented this in a very odd way back then:
instead of simply clearing the MACHINE_HAS_TOPOLOGY flag within the
lowcore I added a second variable which indicated that topology
information should not be used. This is more than suboptimal since it
partially doesn't work. For the fake NUMA case topology information
is still considered and scheduling domains will be created based on
this.
To fix this and to simplify the code get rid of the extra variable and
implement the "topology=off" case like it is done for other features.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a752ba18af ]
Even though most of its registers are 8-bit wide, the IRDA has two
16-bit registers that make it a 16-bit peripheral and not a 8-bit
peripheral with addresses shifted by one. Fix the registers offset in
the driver and the platform data regshift value.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4a8d8a14c0 ]
The arm64 DMA-mapping implementation sets the DMA ops to the IOMMU DMA
ops if we detect that an IOMMU is present for the master and the DMA
ranges are valid.
In the case when the IOMMU domain for the device is not of type
IOMMU_DOMAIN_DMA, then we have no business swizzling the ops, since
we're not in control of the underlying address space. This patch leaves
the DMA ops alone for masters attached to non-DMA IOMMU domains.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4cd6a59f5c ]
We have more than four uarts on some SoCs and that can cause
noise with errors while booting.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a674c7d470 ]
It is not implemented on the kmcoge4 hardware and if not disabled it
leads to error messages with the corenet32_smp_defconfig.
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 37451bc95d ]
Some counters are added in Commit 6e0365b782 ("KVM: PPC: Book3S HV:
Add ICP real mode counters"), to provide some performance statistics to
determine whether further optimizing is needed for real mode functions.
The n_reject counter counts how many times ICP rejects an irq because of
priority in real mode. The redelivery of an lsi that is still asserted
after eoi doesn't fall into this category, so the increasement there is
removed.
Also, it needs to be increased in icp_rm_deliver_irq() if it rejects
another one.
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8b649e4263 ]
The pinmux configuration in device tree was different from manual
muxing in <u-boot>/board/freescale/mx53loco/mx53loco.c
All pins were configured as NO_PAD_CTL(1 << 31), which was fine as the
bootloader already did the correct pinmuxing for us.
But recently u-boot is migrating to reuse device tree files from the
kernel tree, so it seems to be better to have the correct pinmuxing in
our files, too.
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cda80a82ac upstream.
Under heavy system stress mvebu SoC using Cortex A9 sporadically
encountered instability issues.
The "double linefill" feature of L2 cache was identified as causing
dependency between read and write which lead to the deadlock.
Especially, it was the cause of deadlock seen under heavy PCIe traffic,
as this dependency violates PCIE overtaking rule.
Fixes: c8f5a878e5 ("ARM: mvebu: use DT properties to fine-tune the L2 configuration")
Signed-off-by: Yan Markman <ymarkman@marvell.com>
Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
[gregory.clement@free-electrons.com: reformulate commit log, add Armada
375 and add Fixes tag]
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 18569c1f13 ]
Currently, if the kernel is running on a POWER9 processor under a
hypervisor, it will try to use the radix MMU even though it doesn't have
the necessary code to use radix under a hypervisor (it doesn't negotiate
use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The
result is that the guest kernel will crash when it tries to turn on the
MMU.
This fixes it by looking for the /chosen/ibm,architecture-vec-5
property, and if it exists, clears the radix MMU feature bit, before we
decide whether to initialize for radix or HPT. This property is created
by the hypervisor as a result of the guest calling the
ibm,client-architecture-support method to indicate its capabilities, so
it will indicate whether the hypervisor agreed to us using radix.
Systems without a hypervisor may have this property also (for example,
skiboot creates it), so we check the HV bit in the MSR to see whether we
are running as a guest or not. If we are in hypervisor mode, then we can
do whatever we like including using the radix MMU.
The reason for using this property is that in future, when we have
support for using radix under a hypervisor, we will need to check this
property to see whether the hypervisor agreed to us using radix.
Fixes: 2bfd65e45e ("powerpc/mm/radix: Add radix callbacks for early init routines")
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a4f2779ecf ]
In fips mode only xts keys with 128 bit or 125 bit are allowed.
This fix extends the xts_aes_set_key function to check for these
valid key lengths in fips mode.
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d34b1acb78 ]
The generate_entropy function used a sha256 for compacting
together 256 bits of entropy into 32 bytes hash. However, it
is questionable if a sha256 can really be used here, as
potential collisions may reduce the max entropy fitting into
a 32 byte hash value. So this batch introduces the use of
sha512 instead and the required buffer adjustments for the
calling functions.
Further more the working buffer for the generate_entropy
function has been widened from one page to two pages. So now
1024 stckf invocations are used to gather 256 bits of
entropy. This has been done to be on the save side if the
jitters of stckf values isn't as good as supposed.
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cce91dfc8 upstream.
The asm-generic/unaligned.h header provides two different implementations
for accessing unaligned variables: the access_ok.h version used when
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set pretends that all pointers
are in fact aligned, while the le_struct.h version convinces gcc that the
alignment of a pointer is '1', to make it issue the correct load/store
instructions depending on the architecture flags.
On ARMv5 and older, we always use the second version, to let the compiler
use byte accesses. On ARMv6 and newer, we currently use the access_ok.h
version, so the compiler can use any instruction including stm/ldm and
ldrd/strd that will cause an alignment trap. This trap can significantly
impact performance when we have to do a lot of fixups and, worse, has
led to crashes in the LZ4 decompressor code that does not have a trap
handler.
This adds an ARM specific version of asm/unaligned.h that uses the
le_struct.h/be_struct.h implementation unconditionally. This should lead
to essentially the same code on ARMv6+ as before, with the exception of
using regular load/store instructions instead of the trapping instructions
multi-register variants.
The crash in the LZ4 decompressor code was probably introduced by the
patch replacing the LZ4 implementation, commit 4e1a33b105 ("lib: update
LZ4 compressor module"), so linux-4.11 and higher would be affected most.
However, we probably want to have this backported to all older stable
kernels as well, to help with the performance issues.
There are two follow-ups that I think we should also work on, but not
backport to stable kernels, first to change the asm-generic version of
the header to remove the ARM special case, and second to review all
other uses of CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS to see if they
might be affected by the same problem on ARM.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9b269f309 upstream.
When HYP code runs into branch profiling code, it attempts to jump to
unmapped memory, causing a HYP Panic.
Disable the branch profiling for code designed to run at HYP mode.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd6c8c206f upstream.
When a exception is trapped to EL2, hardware uses ELR_ELx to hold
the current fault instruction address. If KVM wants to inject a
abort to 32 bit guest, it needs to set the LR register for the
guest to emulate this abort happened in the guest. Because ARM32
architecture is pipelined execution, so the LR value has an offset to
the fault instruction address.
The offsets applied to Link value for exceptions as shown below,
which should be added for the ARM32 link register(LR).
Table taken from ARMv8 ARM DDI0487B-B, table G1-10:
Exception Offset, for PE state of:
A32 T32
Undefined Instruction +4 +2
Prefetch Abort +4 +4
Data Abort +8 +8
IRQ or FIQ +4 +4
[ Removed unused variables in inject_abt to avoid compile warnings.
-- Christoffer ]
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Tested-by: Haibin Zhang <zhanghaibin7@huawei.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a7003b1da upstream.
It's possible for a user to deliberately trigger __dump_instr with a
chosen kernel address.
Let's avoid problems resulting from this by using get_user() rather than
__get_user(), ensuring that we don't erroneously access kernel memory.
Where we use __dump_instr() on kernel text, we already switch to
KERNEL_DS, so this shouldn't adversely affect those cases.
Fixes: 60ffc30d56 ("arm64: Exception handling")
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac64115a66 upstream.
The following program causes a kernel oops:
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <linux/kvm.h>
main()
{
int fd = open("/dev/kvm", O_RDWR);
ioctl(fd, KVM_CHECK_EXTENSION, KVM_CAP_PPC_HTM);
}
This happens because when using the global KVM fd with
KVM_CHECK_EXTENSION, kvm_vm_ioctl_check_extension() gets
called with a NULL kvm argument, which gets dereferenced
in is_kvmppc_hv_enabled(). Spotted while reading the code.
Let's use the hv_enabled fallback variable, like everywhere
else in this function.
Fixes: 23528bb21e ("KVM: PPC: Introduce KVM_CAP_PPC_HTM")
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 723f2828a9 upstream.
Blacklist Broadwell X model 79 for late loading due to an erratum.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171018111225.25635-1-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 374b3bf8e8 upstream.
As discussed on the debian-hppa list, double-wordcompare and exchange
operations fail on 32-bit kernels. Looking at the code, I realized that
the ",ma" completer does the wrong thing in the "ldw,ma 4(%r26), %r29"
instruction. This increments %r26 and causes the following store to
write to the wrong location.
Note by Helge Deller:
The patch applies cleanly to stable kernel series if this upstream
commit is merged in advance:
f4125cfdb3 ("parisc: Avoid trashing sr2 and sr3 in LWS code").
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Tested-by: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Fixes: 8920649120 ("parisc: Implement new LWS CAS supporting 64 bit operations.")
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8d911904f3 ]
PMC5 on POWER9 DD1 may not provide right counts in all
sampling scenarios, hence use PM_INST_DISP event instead
in PMC2 or PMC3 in preference.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ddffe98d16 ]
To identify that pages of page table are allocated from bootmem
allocator, magic number sets to page->lru.next.
But page->lru list is initialized in reserve_bootmem_region(). So when
calling free_pagetable(), the function cannot find the magic number of
pages. And free_pagetable() frees the pages by free_reserved_page() not
put_page_bootmem().
But if the pages are allocated from bootmem allocator and used as page
table, the pages have private flag. So before freeing the pages, we
should clear the private flag by put_page_bootmem().
Before applying the commit 7bfec6f47b ("mm, page_alloc: check multiple
page fields with a single branch"), we could find the following visible
issue:
BUG: Bad page state in process kworker/u1024:1
page:ffffea103cfd8040 count:0 mapcount:0 mappi
flags: 0x6fffff80000800(private)
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
bad because of flags: 0x800(private)
<snip>
Call Trace:
[...] dump_stack+0x63/0x87
[...] bad_page+0x114/0x130
[...] free_pages_prepare+0x299/0x2d0
[...] free_hot_cold_page+0x31/0x150
[...] __free_pages+0x25/0x30
[...] free_pagetable+0x6f/0xb4
[...] remove_pagetable+0x379/0x7ff
[...] vmemmap_free+0x10/0x20
[...] sparse_remove_one_section+0x149/0x180
[...] __remove_pages+0x2e9/0x4f0
[...] arch_remove_memory+0x63/0xc0
[...] remove_memory+0x8c/0xc0
[...] acpi_memory_device_remove+0x79/0xa5
[...] acpi_bus_trim+0x5a/0x8d
[...] acpi_bus_trim+0x38/0x8d
[...] acpi_device_hotplug+0x1b7/0x418
[...] acpi_hotplug_work_fn+0x1e/0x29
[...] process_one_work+0x152/0x400
[...] worker_thread+0x125/0x4b0
[...] kthread+0xd8/0xf0
[...] ret_from_fork+0x22/0x40
And the issue still silently occurs.
Until freeing the pages of page table allocated from bootmem allocator,
the page->freelist is never used. So the patch sets magic number to
page->freelist instead of page->lru.next.
[isimatu.yasuaki@jp.fujitsu.com: fix merge issue]
Link: http://lkml.kernel.org/r/722b1cc4-93ac-dd8b-2be2-7a7e313b3b0b@gmail.com
Link: http://lkml.kernel.org/r/2c29bd9f-5b67-02d0-18a3-8828e78bbb6f@gmail.com
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7dd4fcf5b7 ]
On panic, all other CPUs are stopped except the one which had
hit panic. To keep console alive, we need to migrate hvcons irq
to panicked CPU.
Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fdc66e046 upstream.
Commit db8466c581 ("MIPS: IRQ Stack: Unwind IRQ stack onto task
stack") erroneously set the initial stack pointer of the IRQ stack to a
value with a 4 byte alignment. The MIPS32 ABI requires that the minimum
stack alignment is 8 byte, and the MIPS64 ABIs(n32/n64) require 16 byte
minimum alignment. Fix IRQ_STACK_START such that it leaves space for the
dummy stack frame (containing interrupted task kernel stack pointer)
while also meeting minimum alignment requirements.
Fixes: db8466c581 ("MIPS: IRQ Stack: Unwind IRQ stack onto task stack")
Reported-by: Darius Ivanauskas <dasilt@yahoo.com>
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Jason A. Donenfeld <jason@zx2c4.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16760/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd19d3b451 upstream.
The function updates context->root_level but didn't call
update_last_nonleaf_level so the previous and potentially wrong value
was used for page walks. For example, a zero value of last_nonleaf_level
would allow a potential out-of-bounds access in arch/x86/mmu/paging_tmpl.h's
walk_addr_generic function (CVE-2017-12188).
Fixes: 155a97a3d7
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b32c126d3 upstream.
The alt_max_short() macro in asm/alternative.h does not work as
intended, leading to nasty bugs. E.g. alt_max_short("1", "3")
evaluates to 3, but alt_max_short("3", "1") evaluates to 1 -- not
exactly the maximum of 1 and 3.
In fact, I had to learn it the hard way by crashing my kernel in not
so funny ways by attempting to make use of the ALTENATIVE_2 macro
with alternatives where the first one was larger than the second
one.
According to [1] and commit dbe4058a6a ("x86/alternatives: Fix
ALTERNATIVE_2 padding generation properly") the right handed side
should read "-(-(a < b))" not "-(-(a - b))". Fix that, to make the
macro work as intended.
While at it, fix up the comments regarding the additional "-", too.
It's not about gas' usage of s32 but brain dead logic of having a
"true" value of -1 for the < operator ... *sigh*
Btw., the one in asm/alternative-asm.h is correct. And, apparently,
all current users of ALTERNATIVE_2() pass same sized alternatives,
avoiding to hit the bug.
[1] http://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMax
Reviewed-and-tested-by: Borislav Petkov <bp@suse.de>
Fixes: dbe4058a6a ("x86/alternatives: Fix ALTERNATIVE_2 padding generation properly")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1507228213-13095-1-git-send-email-minipli@googlemail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8eb3f87d90 upstream.
When KVM emulates an exit from L2 to L1, it loads L1 CR4 into the
guest CR4. Before this CR4 loading, the guest CR4 refers to L2
CR4. Because these two CR4's are in different levels of guest, we
should vmx_set_cr4() rather than kvm_set_cr4() here. The latter, which
is used to handle guest writes to its CR4, checks the guest change to
CR4 and may fail if the change is invalid.
The failure may cause trouble. Consider we start
a L1 guest with non-zero L1 PCID in use,
(i.e. L1 CR4.PCIDE == 1 && L1 CR3.PCID != 0)
and
a L2 guest with L2 PCID disabled,
(i.e. L2 CR4.PCIDE == 0)
and following events may happen:
1. If kvm_set_cr4() is used in load_vmcs12_host_state() to load L1 CR4
into guest CR4 (in VMCS01) for L2 to L1 exit, it will fail because
of PCID check. As a result, the guest CR4 recorded in L0 KVM (i.e.
vcpu->arch.cr4) is left to the value of L2 CR4.
2. Later, if L1 attempts to change its CR4, e.g., clearing VMXE bit,
kvm_set_cr4() in L0 KVM will think L1 also wants to enable PCID,
because the wrong L2 CR4 is used by L0 KVM as L1 CR4. As L1
CR3.PCID != 0, L0 KVM will inject GP to L1 guest.
Fixes: 4704d0befb ("KVM: nVMX: Exiting from L2 to L1")
Cc: qemu-stable@nongnu.org
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 829ee279ae upstream.
is_last_gpte() is not equivalent to the pseudo-code given in commit
6bb69c9b69 ("KVM: MMU: simplify last_pte_bitmap") because an incorrect
value of last_nonleaf_level may override the result even if level == 1.
It is critical for is_last_gpte() to return true on level == 1 to
terminate page walks. Otherwise memory corruption may occur as level
is used as an index to various data structures throughout the page
walking code. Even though the actual bug would be wherever the MMU is
initialized (as in the previous patch), be defensive and ensure here
that is_last_gpte() returns the correct value.
This patch is also enough to fix CVE-2017-12188.
Fixes: 6bb69c9b69
Cc: Andy Honig <ahonig@google.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
[Panic if walk_addr_generic gets an incorrect level; this is a serious
bug and it's not worth a WARN_ON where the recovery path might hide
further exploitable issues; suggested by Andrew Honig. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca8eb05b5f upstream.
The FPU emulator includes 2 calls to pr_err() which are triggered by
invalid instruction encodings for MIPSr6 cmp.cond.fmt instructions.
These cases are not kernel errors, merely invalid instructions which are
already handled by delivering a SIGILL which will provide notification
that something failed in cases where that makes sense.
In cases where that SIGILL is somewhat expected & being handled, for
example when crashme happens to generate one of the affected bad
encodings, the message is printed with no useful context about what
triggered it & spams the kernel log for no good reason.
Remove the pr_err() calls to make crashme run silently & treat the bad
encodings the same way we do others, with a SIGILL & no further kernel
log output.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: f8c3c6717a ("MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17253/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c8401dda2f upstream.
TF is handled a bit differently for syscall and sysret, compared
to the other instructions: TF is checked after the instruction completes,
so that the OS can disable #DB at a syscall by adding TF to FMASK.
When the sysret is executed the #DB is taken "as if" the syscall insn
just completed.
KVM emulates syscall so that it can trap 32-bit syscall on Intel processors.
Fix the behavior, otherwise you could get #DB on a user stack which is not
nice. This does not affect Linux guests, as they use an IST or task gate
for #DB.
This fixes CVE-2017-7518.
Cc: stable@vger.kernel.org
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
[bwh: Backported to 4.9:
- kvm_vcpu_check_singlestep() sets some flags differently
- Drop changes to kvm_skip_emulated_instruction()]
Cc: Ben Hutchings <benh@debian.org>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 044215d145 upstream.
Currently it's possible that on returning from the signal handler
through the restore_tm_sigcontexts() code path (e.g. from a signal
caught due to a `trap` instruction executed in the middle of an HTM
block, or a deliberately constructed sigframe) an illegal TM state
(like TS=10 TM=0, i.e. "T0") is set in SRR1 and when `rfid` sets
implicitly the MSR register from SRR1 register on return to userspace
it causes a TM Bad Thing exception.
That illegal state can be set (a) by a malicious user that disables
the TM bit by tweaking the bits in uc_mcontext before returning from
the signal handler or (b) by a sufficient number of context switches
occurring such that the load_tm counter overflows and TM is disabled
whilst in the signal handler.
This commit fixes the illegal TM state by ensuring that TM bit is
always enabled before we return from restore_tm_sigcontexts(). A small
comment correction is made as well.
Fixes: 5d176f751e ("powerpc: tm: Enable transactional memory (TM) lazily for userspace")
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 265e60a170 upstream.
When using transactional memory (TM), the CPU can be in one of six
states as far as TM is concerned, encoded in the Machine State
Register (MSR). Certain state transitions are illegal and if attempted
trigger a "TM Bad Thing" type program check exception.
If we ever hit one of these exceptions it's treated as a bug, ie. we
oops, and kill the process and/or panic, depending on configuration.
One case where we can trigger a TM Bad Thing, is when returning to
userspace after a system call or interrupt, using RFID. When this
happens the CPU first restores the user register state, in particular
r1 (the stack pointer) and then attempts to update the MSR. However
the MSR update is not allowed and so we take the program check with
the user register state, but the kernel MSR.
This tricks the exception entry code into thinking we have a bad
kernel stack pointer, because the MSR says we're coming from the
kernel, but r1 is pointing to userspace.
To avoid this we instead always switch to the emergency stack if we
take a TM Bad Thing from the kernel. That way none of the user
register values are used, other than for printing in the oops message.
This is the fix for CVE-2017-1000255.
Fixes: 5d176f751e ("powerpc: tm: Enable transactional memory (TM) lazily for userspace")
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
[mpe: Rewrite change log & comments, tweak asm slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91c575b335 upstream.
Commit 227be799c3 ("s390/mm: uninline pmdp_xxx functions from pgtable.h")
inadvertently changed the behavior of pmdp_invalidate(), so that it now
clears the pmd instead of just marking it as invalid. Fix this by restoring
the original behavior.
A possible impact of the misbehaving pmdp_invalidate() would be the
MADV_DONTNEED races (see commits ced10803 and 58ceeb6b), although we
should not have any negative impact on the related dirty/young flags,
since those flags are not set by the hardware on s390.
Fixes: 227be799c3 ("s390/mm: uninline pmdp_xxx functions from pgtable.h")
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 88d1fa70c2 ]
Memory starts at 0x80000000, not 0. 0 "works" due to mirrior of the
first 128M of RAM to that address. Anything greater than 128M will
quickly find nothing there. Correcting the starting address has
everything working again.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: 7eb05f6d ("ARM: dts: bcm5301x: Add BCM SVK DT files")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2b85b3d229 ]
The following commits:
f7c28833c2 ("x86/acpi: Enable acpi to register all possible cpus at
boot time") and 8f54969dc8 ("x86/acpi: Introduce persistent storage
for cpuid <-> apicid mapping")
... registered all the possible CPUs at boot time via ACPI tables to
make the mapping of cpuid <-> apicid fixed. Both enabled and disabled
CPUs could have a logical CPU ID after boot time.
But, ACPI tables are unreliable. the number amd order of Local APIC
entries which depends on the firmware is often inconsistent with the
physical devices. Even if they are consistent, The disabled CPUs which
take up some logical CPU IDs will also make the order discontinuous.
Revert the part of disabled CPUs registration, keep the allocation
logic of logical CPU IDs and also keep some code location changes.
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Tested-by: Xiaolong Ye <xiaolong.ye@intel.com>
Cc: rjw@rjwysocki.net
Cc: linux-acpi@vger.kernel.org
Cc: guzheng1@huawei.com
Cc: izumi.taku@jp.fujitsu.com
Cc: lenb@kernel.org
Link: http://lkml.kernel.org/r/1488528147-2279-4-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
