[ Upstream commit 4025c784c5 ]
When an asynchronous interrupt calls irq_exit, it checks for softirqs
that may have been created, and runs them. Running softirqs enables
local irqs, which can replay pending interrupts causing recursion in
replay_soft_interrupts. This abridged trace shows how this can occur:
! NIP replay_soft_interrupts
LR interrupt_exit_kernel_prepare
Call Trace:
interrupt_exit_kernel_prepare (unreliable)
interrupt_return
--- interrupt: ea0 at __rb_reserve_next
NIP __rb_reserve_next
LR __rb_reserve_next
Call Trace:
ring_buffer_lock_reserve
trace_function
function_trace_call
ftrace_call
__do_softirq
irq_exit
timer_interrupt
! replay_soft_interrupts
interrupt_exit_kernel_prepare
interrupt_return
--- interrupt: ea0 at arch_local_irq_restore
This can not be prevented easily, because softirqs must not block hard
irqs, so it has to be dealt with.
The recursion is bounded by design in the softirq code because softirq
replay disables softirqs and loops around again to check for new
softirqs created while it ran, so that's not a problem.
However it does mess up interrupt replay state, causing superfluous
interrupts when the second replay_soft_interrupts clears a pending
interrupt, leaving it still set in the first call in the 'happened'
local variable.
Fix this by not caching a copy of irqs_happened across interrupt
handler calls.
Fixes: 3282a3da25 ("powerpc/64: Implement soft interrupt replay in C")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210123061244.2076145-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cc0bfc9c1 ]
The PHY address bit 2 is configured by the LED pin. Attaching a LED
to this pin is not sufficient to guarantee this configuration pin is
correctly read. This leads to some platforms having their PHY at
address 0 and others at address 4.
If there is no phy-handle specified, the FEC driver will scan the PHY
bus for a PHY and use that. Consequently, adding the DT configuration
of the PHY and the phy properties to the FEC driver broke some boards.
Fix this by removing the phy-handle property, and listing two PHY
entries for both possible PHY addresses, so that the DT configuration
for the PHY can be found by the PHY driver.
Fixes: 86b08bd5b9 ("ARM: dts: imx6-sr-som: add ethernet PHY configuration")
Reported-by: Christoph Mattheis <christoph.mattheis@arcor.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1653e3d470 ]
The offset of the reset request register is 0, the absolute address is
0x1e60000. Boards without PSCI support will fail to perform a reset:
[ 26.734700] reboot: Restarting system
[ 27.743259] Unable to restart system
[ 27.746845] Reboot failed -- System halted
Fixes: 8897f3255c ("arm64: dts: Add support for NXP LS1028A SoC")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 30596ae054 upstream.
Commit 7536c7e03e ("of/fdt: Remove redundant kbasename function
call") exposed a bug creating DT nodes in the ATAGS to DT fixup code.
Non-existent nodes would mistaken get created with a leading '/'. The
problem was fdt_path_offset() takes a full path while creating a node
with fdt_add_subnode() takes just the basename.
Since this we only add root child nodes, we can just skip over the '/'.
Fixes: 7536c7e03e ("of/fdt: Remove redundant kbasename function call")
Reported-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Qi Zheng <arch0.zheng@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20210126023905.1631161-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a88afa46b8 upstream.
When the kernel is configured to use the Thumb-2 instruction set
"suspend-to-memory" fails to resume. Observed on a Colibri iMX6ULL
(i.MX 6ULL) and Apalis iMX6 (i.MX 6Q).
It looks like the CPU resumes unconditionally in ARM instruction mode
and then chokes on the presented Thumb-2 code it should execute.
Fix this by using the arm instruction set for all code in
suspend-imx6.S.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Fixes: df595746fa ("ARM: imx: add suspend in ocram support for i.mx6q")
Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6337c2353a upstream.
The pwms property have to specify the no-/inverted flag since
commit fa28d8212e ("ARM: dts: imx: default to #pwm-cells = <3>
in the SoC dtsi files").
Fixes: fa28d8212e ("ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f7becf1b7 upstream.
The injection process of smi has two steps:
Qemu KVM
Step1:
cpu->interrupt_request &= \
~CPU_INTERRUPT_SMI;
kvm_vcpu_ioctl(cpu, KVM_SMI)
call kvm_vcpu_ioctl_smi() and
kvm_make_request(KVM_REQ_SMI, vcpu);
Step2:
kvm_vcpu_ioctl(cpu, KVM_RUN, 0)
call process_smi() if
kvm_check_request(KVM_REQ_SMI, vcpu) is
true, mark vcpu->arch.smi_pending = true;
The vcpu->arch.smi_pending will be set true in step2, unfortunately if
vcpu paused between step1 and step2, the kvm_run->immediate_exit will be
set and vcpu has to exit to Qemu immediately during step2 before mark
vcpu->arch.smi_pending true.
During VM migration, Qemu will get the smi pending status from KVM using
KVM_GET_VCPU_EVENTS ioctl at the downtime, then the smi pending status
will be lost.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Shengen Zhuang <zhuangshengen@huawei.com>
Message-Id: <20210118084720.1585-1-jianjay.zhou@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d51e1d3f6b upstream.
Even when we are outside the nested guest, some vmcs02 fields
may not be in sync vs vmcs12. This is intentional, even across
nested VM-exit, because the sync can be delayed until the nested
hypervisor performs a VMCLEAR or a VMREAD/VMWRITE that affects those
rarely accessed fields.
However, during KVM_GET_NESTED_STATE, the vmcs12 has to be up to date to
be able to restore it. To fix that, call copy_vmcs02_to_vmcs12_rare()
before the vmcs12 contents are copied to userspace.
Fixes: 7952d769c2 ("KVM: nVMX: Sync rarely accessed guest fields only when needed")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210114205449.8715-2-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a78e15802 upstream.
VMX also uses KVM_REQ_GET_NESTED_STATE_PAGES for the Hyper-V eVMCS,
which may need to be loaded outside guest mode. Therefore we cannot
WARN in that case.
However, that part of nested_get_vmcs12_pages is _not_ needed at
vmentry time. Split it out of KVM_REQ_GET_NESTED_STATE_PAGES handling,
so that both vmentry and migration (and in the latter case, independent
of is_guest_mode) do the parts that are needed.
Cc: <stable@vger.kernel.org> # 5.10.x: f2c7ef3ba: KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2c7ef3ba9 upstream.
It is possible to exit the nested guest mode, entered by
svm_set_nested_state prior to first vm entry to it (e.g due to pending event)
if the nested run was not pending during the migration.
In this case we must not switch to the nested msr permission bitmap.
Also add a warning to catch similar cases in the future.
Fixes: a7d5c7ce41 ("KVM: nSVM: delay MSR permission processing to first nested VM run")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210107093854.882483-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e61ab2a320 upstream.
Since we know vPMU will not work properly when (1) the guest bit_width(s)
of the [gp|fixed] counters are greater than the host ones, or (2) guest
requested architectural events exceeds the range supported by the host, so
we can setup a smaller left shift value and refresh the guest cpuid entry,
thus fixing the following UBSAN shift-out-of-bounds warning:
shift exponent 197 is too large for 64-bit type 'long long unsigned int'
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:120
ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
intel_pmu_refresh.cold+0x75/0x99 arch/x86/kvm/vmx/pmu_intel.c:348
kvm_vcpu_after_set_cpuid+0x65a/0xf80 arch/x86/kvm/cpuid.c:177
kvm_vcpu_ioctl_set_cpuid2+0x160/0x440 arch/x86/kvm/cpuid.c:308
kvm_arch_vcpu_ioctl+0x11b6/0x2d70 arch/x86/kvm/x86.c:4709
kvm_vcpu_ioctl+0x7b9/0xdb0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3386
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: syzbot+ae488dc136a4cc6ba32b@syzkaller.appspotmail.com
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20210118025800.34620-1-like.xu@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98dd2f108e upstream.
The HW_REF_CPU_CYCLES event on the fixed counter 2 is pseudo-encoded as
0x0300 in the intel_perfmon_event_map[]. Correct its usage.
Fixes: 62079d8a43 ("KVM: PMU: add proper support for fixed counter 2")
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20201230081916.63417-1-like.xu@linux.intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e6dca82bc upstream.
Arnd found a randconfig that produces the warning:
arch/x86/entry/thunk_64.o: warning: objtool: missing symbol for insn at
offset 0x3e
when building with LLVM_IAS=1 (Clang's integrated assembler). Josh
notes:
With the LLVM assembler not generating section symbols, objtool has no
way to reference this code when it generates ORC unwinder entries,
because this code is outside of any ELF function.
The limitation now being imposed by objtool is that all code must be
contained in an ELF symbol. And .L symbols don't create such symbols.
So basically, you can use an .L symbol *inside* a function or a code
segment, you just can't use the .L symbol to contain the code using a
SYM_*_START/END annotation pair.
Fangrui notes that this optimization is helpful for reducing image size
when compiling with -ffunction-sections and -fdata-sections. I have
observed on the order of tens of thousands of symbols for the kernel
images built with those flags.
A patch has been authored against GNU binutils to match this behavior
of not generating unused section symbols ([1]), so this will
also become a problem for users of GNU binutils once they upgrade to 2.36.
Omit the .L prefix on a label so that the assembler will emit an entry
into the symbol table for the label, with STB_LOCAL binding. This
enables objtool to generate proper unwind info here with LLVM_IAS=1 or
GNU binutils 2.36+.
[ bp: Massage commit message. ]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Suggested-by: Borislav Petkov <bp@alien8.de>
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20210112194625.4181814-1-ndesaulniers@google.com
Link: https://github.com/ClangBuiltLinux/linux/issues/1209
Link: https://reviews.llvm.org/D93783
Link: https://sourceware.org/binutils/docs/as/Symbol-Names.html
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1408485ce69f844dcd7ded093a8 [1]
Cc: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e82080e1f4 upstream.
The number reported by the query is N-1 and I think people reading the
sysfs file would expect N instead. For users creating VMs there's no
actual difference because KVM's limit is currently below the UV's
limit.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Fixes: a0f60f8431 ("s390/protvirt: Add sysfs firmware interface for Ultravisor information")
Cc: stable@vger.kernel.org
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a996b2d8a upstream.
The Ux500 platforms have some memory carveouts set aside for
communicating with the modem and for the initial secure software
(ISSW). These areas are protected by the memory controller
and will result in an external abort if accessed like common
read/write memory.
On the legacy boot loaders, these were set aside by using
cmdline arguments such as this:
mem=96M@0 mem_mtrace=15M@96M mem_mshared=1M@111M
mem_modem=16M@112M mali.mali_mem=32M@128M mem=96M@160M
hwmem=127M@256M mem_issw=1M@383M mem_ram_console=1M@384M
mem=638M@385M
Reserve the relevant areas in the device tree instead. The
"mali", "hwmem", "mem_ram_console" and the trailing 1MB at the
end of the memory reservations in the list are not relevant for
the upstream kernel as these are nowadays replaced with
upstream technologies such as CMA. The modem and ISSW
reservations are necessary.
This was manifested in a bug that surfaced in response to
commit 7fef431be9 ("mm/page_alloc: place pages to tail in __free_pages_core()")
which changes the behaviour of memory allocations
in such a way that the platform will sooner run into these
dangerous areas, with "Unhandled fault: imprecise external
abort (0xc06) at 0xb6fd83dc" or similar: the real reason
turns out to be that the PTE is pointing right into one of
the reserved memory areas. We were just lucky until now.
We need to augment the DB8500 and DB8520 SoCs similarly
and also create a new include for the DB9500 used in the
Snowball since this does not have a modem and thus does
not need the modem memory reservation, albeit it needs
the ISSW reservation.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Cc: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201213225517.3838501-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd25c88366 upstream.
to be consistent with kernel versions up to v5.9 (mmc aliases not used here).
usdhc1 is not wired up on this board and therefore cannot be used.
Start mmc aliases with usdhc2.
Signed-off-by: Soeren Moch <smoch@web.de>
Cc: stable@vger.kernel.org # 5.10.x
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00e35f2b0e upstream.
When building a kernel without module support, the CONFIG_MLONGCALL option
needs to be enabled in order to reach symbols which are outside of a 22-bit
branch.
This patch changes the autodetection in the Kconfig script to always enable
CONFIG_MLONGCALL when modules are disabled and uses a far call to
preempt_schedule_irq() in intr_do_preempt() to reach the symbol in all cases.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org # v5.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7024f60d65 upstream.
Don't assume dest/source buffers are userspace addresses when manually
copying data for string I/O or MOVS MMIO, as {get,put}_user() will fail
if handed a kernel address and ultimately lead to a kernel panic.
When invoking INSB/OUTSB instructions in kernel space in a
SEV-ES-enabled VM, the kernel crashes with the following message:
"SEV-ES: Unsupported exception in #VC instruction emulation - can't continue"
Handle that case properly.
[ bp: Massage commit message. ]
Fixes: f980f9c31a ("x86/sev-es: Compile early handler code into kernel image")
Signed-off-by: Hyunwook (Wooky) Baek <baekhw@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Link: https://lkml.kernel.org/r/20210110071102.2576186-1-baekhw@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f477a538c1 upstream.
When G2_DMA is enabled and SH_DMA is disabled, it results in the following
Kbuild warning:
WARNING: unmet direct dependencies detected for SH_DMA_API
Depends on [n]: SH_DMA [=n]
Selected by [y]:
- G2_DMA [=y] && SH_DREAMCAST [=y]
The reason is that G2_DMA selects SH_DMA_API without depending on or
selecting SH_DMA while SH_DMA_API depends on SH_DMA.
When G2_DMA was first introduced with commit 40f49e7ed7
("sh: dma: Make G2 DMA configurable."), this wasn't an issue since
SH_DMA_API didn't have such dependency, and this way was the only way to
enable it since SH_DMA_API was non-visible. However, later SH_DMA_API was
made visible and dependent on SH_DMA with commit d8902adcc1
("dmaengine: sh: Add Support SuperH DMA Engine driver").
Let G2_DMA depend on SH_DMA_API instead to avoid Kbuild issues.
Fixes: d8902adcc1 ("dmaengine: sh: Add Support SuperH DMA Engine driver")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76e2fc63ca upstream.
Set the maximum DIE per package variable on AMD using the
NodesPerProcessor topology value. This will be used by RAPL, among
others, to determine the maximum number of DIEs on the system in order
to do per-DIE manipulations.
[ bp: Productize into a proper patch. ]
Fixes: 028c221ed1 ("x86/CPU/AMD: Save AMD NodeId as cpu_die_id")
Reported-by: Johnathan Smithinovic <johnathan.smithinovic@gmx.at>
Reported-by: Rafael Kitover <rkitover@gmail.com>
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Johnathan Smithinovic <johnathan.smithinovic@gmx.at>
Tested-by: Rafael Kitover <rkitover@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210939
Link: https://lkml.kernel.org/r/20210106112106.GE5729@zn.tnic
Link: https://lkml.kernel.org/r/20210111101455.1194-1-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bde9cfa3af upstream.
Patch series "mm: fix initialization of struct page for holes in memory layout", v3.
Commit 73a6e474cb ("mm: memmap_init: iterate over memblock regions
rather that check each PFN") exposed several issues with the memory map
initialization and these patches fix those issues.
Initially there were crashes during compaction that Qian Cai reported
back in April [1]. It seemed back then that the problem was fixed, but
a few weeks ago Andrea Arcangeli hit the same bug [2] and there was an
additional discussion at [3].
[1] https://lore.kernel.org/lkml/8C537EB7-85EE-4DCF-943E-3CC0ED0DF56D@lca.pw
[2] https://lore.kernel.org/lkml/20201121194506.13464-1-aarcange@redhat.com
[3] https://lore.kernel.org/mm-commits/20201206005401.qKuAVgOXr%akpm@linux-foundation.org
This patch (of 2):
The first 4Kb of memory is a BIOS owned area and to avoid its allocation
for the kernel it was not listed in e820 tables as memory. As the result,
pfn 0 was never recognised by the generic memory management and it is not
a part of neither node 0 nor ZONE_DMA.
If set_pfnblock_flags_mask() would be ever called for the pageblock
corresponding to the first 2Mbytes of memory, having pfn 0 outside of
ZONE_DMA would trigger
VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page), pfn), page);
Along with reserving the first 4Kb in e820 tables, several first pages are
reserved with memblock in several places during setup_arch(). These
reservations are enough to ensure the kernel does not touch the BIOS area
and it is not necessary to remove E820_TYPE_RAM for pfn 0.
Remove the update of e820 table that changes the type of pfn 0 and move
the comment describing why it was done to trim_low_memory_range() that
reserves the beginning of the memory.
Link: https://lkml.kernel.org/r/20210111194017.22696-2-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67de8dca50 upstream.
The default kernel_fpu_begin() doesn't work on systems that support XMM but
haven't yet enabled CR4.OSFXSR. This causes crashes when _mmx_memcpy() is
called too early because LDMXCSR generates #UD when the aforementioned bit
is clear.
Fix it by using kernel_fpu_begin_mask(KFPU_387) explicitly.
Fixes: 7ad816762f ("x86/fpu: Reset MXCSR to default in kernel_fpu_begin()")
Reported-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Krzysztof Piotr Olędzki <ole@ans.pl>
Tested-by: Krzysztof Mazur <krzysiek@podlesie.net>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/e7bf21855fe99e5f3baa27446e32623358f69e8d.1611205691.git.luto@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1eb8f690bc upstream.
Move it outside of CONFIG_SMP in order to avoid ifdeffery at the usage
sites.
Fixes: 76e2fc63ca ("x86/cpu/amd: Set __max_die_per_package on AMD")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210114111814.5346-1-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e45122893a upstream.
Currently, requesting kernel FPU access doesn't distinguish which parts of
the extended ("FPU") state are needed. This is nice for simplicity, but
there are a few cases in which it's suboptimal:
- The vast majority of in-kernel FPU users want XMM/YMM/ZMM state but do
not use legacy 387 state. These users want MXCSR initialized but don't
care about the FPU control word. Skipping FNINIT would save time.
(Empirically, FNINIT is several times slower than LDMXCSR.)
- Code that wants MMX doesn't want or need MXCSR initialized.
_mmx_memcpy(), for example, can run before CR4.OSFXSR gets set, and
initializing MXCSR will fail because LDMXCSR generates an #UD when the
aforementioned CR4 bit is not set.
- Any future in-kernel users of XFD (eXtended Feature Disable)-capable
dynamic states will need special handling.
Add a more specific API that allows callers to specify exactly what they
want.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Krzysztof Piotr Olędzki <ole@ans.pl>
Link: https://lkml.kernel.org/r/aff1cac8b8fc7ee900cf73e8f2369966621b053f.1611205691.git.luto@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08685be776 upstream.
The L1D flush fallback functions are not recoverable vs interrupts,
yet the scv entry flush runs with MSR[EE]=1. This can result in a
timer (soft-NMI) or MCE or SRESET interrupt hitting here and overwriting
the EXRFI save area, which ends up corrupting userspace registers for
scv return.
Fix this by disabling RI and EE for the scv entry fallback flush.
Fixes: f79643787e ("powerpc/64s: flush L1D on kernel entry")
Cc: stable@vger.kernel.org # 5.9+ which also have flush L1D patch backport
Reported-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210111062408.287092-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit df06824767 ]
All EL0 returns go via ret_to_user(), which masks IRQs and notifies
lockdep and tracing before calling into do_notify_resume(). Therefore,
there's no need for do_notify_resume() to call trace_hardirqs_off(), and
the comment is stale. The call is simply redundant.
In ret_to_user() we call exit_to_user_mode(), which notifies lockdep and
tracing the IRQs will be enabled in userspace, so there's no need for
el0_svc_common() to call trace_hardirqs_on() before returning. Further,
at the start of ret_to_user() we call trace_hardirqs_off(), so not only
is this redundant, but it is immediately undone.
In addition to being redundant, the trace_hardirqs_on() in
el0_svc_common() leaves lockdep inconsistent with the hardware state,
and is liable to cause issues for any C code or instrumentation
between this and the call to trace_hardirqs_off() which undoes it in
ret_to_user().
This patch removes the redundant tracing calls and associated stale
comments.
Fixes: 23529049c6 ("arm64: entry: fix non-NMI user<->kernel transitions")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107145310.44616-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2225a8dda2 ]
This is a bug that causes early crashes in builds with an .exit.text
section smaller than a page and an .init.text section that ends in the
beginning of a physical page (this is kinda random, which might
explain why this wasn't really encountered before).
The init sections are ordered like this:
.init.text
.exit.text
.init.data
Currently, these sections aren't page aligned.
Because the init code might become read-only at runtime and because
the .init.text section can potentially reside on the same physical
page as .init.data, the beginning of .init.data might be mapped
read-only along with .init.text.
Then when the kernel tries to modify a variable in .init.data (like
kthreadd_done, used in kernel_init()) the kernel panics.
To avoid this, make _einittext page aligned and also align .exit.text
to make sure .init.data is always seperated from the text segments.
Fixes: 060ef9d89d ("powerpc32: PAGE_EXEC required for inittext")
Signed-off-by: Ariel Marcovitch <ariel.marcovitch@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210102201156.10805-1-ariel.marcovitch@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fdcfeaba38 ]
Use the common INIT_DATA_SECTION rule for the linker script in an effort
to regularize the linker script.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1604487550-20040-1-git-send-email-tangyouling@loongson.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e557793799 ]
Linux kernel can only map 1GB of address space for RV32 as the page offset
is set to 0xC0000000. The current description in the Kconfig is confusing
as it indicates that RV32 can support 2GB of physical memory. That is
simply not true for current kernel. In future, a 2GB split support can be
added to allow 2GB physical address space.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abb8e86b26 ]
Currently, linux kernel can not use last 4k bytes of addressable space
because IS_ERR_VALUE macro treats those as an error. This will be an issue
for RV32 as any memblock allocator potentially allocate chunk of memory
from the end of DRAM (2GB) leading bad address error even though the
address was technically valid.
Fix this issue by limiting the memblock if available memory spans the
entire address space.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0983834a83 ]
Ethernet phy VSC8541-01 on HiFive Unleashed has its reset line
connected to a gpio, so enable GPIO driver's required to reset
the phy.
Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0fa9d7270 ]
The GEMGXL_RST line on HiFive Unleashed is pulled low and is
using GPIO number 12. Add these reset-gpio details to dt-node
using which the linux phylib can reset the phy.
Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be969b7cfb ]
HiFive unleashed A00 board has VSC8541-01 ethernet phy, this device is
identified as a Revision B device as described in device identification
registers. In order to use this phy in the unmanaged mode, it requires
a specific reset sequence of logical 0-1-0-1 transition on the NRESET pin
as documented here [1].
Currently, the bootloader (fsbl or u-boot-spl) takes care of the phy reset.
If due to some reason the phy device hasn't received the reset by the prior
stages before the linux macb driver comes into the picture, the MACB mii
bus gets probed but the mdio scan fails and is not even able to read the
phy ID registers. It gives an error message:
"libphy: MACB_mii_bus: probed
mdio_bus 10090000.ethernet-ffffffff: MDIO device at address 0 is missing."
Thus adding the device OUI (Organizationally Unique Identifier) to the phy
device node helps to probe the phy device.
[1]: VSC8541-01 datasheet:
https://www.mouser.com/ds/2/523/Microsemi_VSC8541-01_Datasheet_10496_V40-1148034.pdf
Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d7746bea9 ]
Only the IPI-related functions in the smp_ops should be conditional
on the vector callback being available. The rest should still happen:
• xen_hvm_smp_prepare_boot_cpu()
This function does two things, both of which should still happen if
there is no vector callback support.
The call to xen_vcpu_setup() for vCPU0 should still happen as it just
sets up the vcpu_info for CPU0. That does happen for the secondary
vCPUs too, from xen_cpu_up_prepare_hvm().
The second thing it does is call xen_init_spinlocks(), which perhaps
counter-intuitively should *also* still be happening in the case
without vector callbacks, so that it can clear its local xen_pvspin
flag and disable the virt_spin_lock_key accordingly.
Checking xen_have_vector_callback in xen_init_spinlocks() itself
would affect PV guests, so set the global nopvspin flag in
xen_hvm_smp_init() instead, when vector callbacks aren't available.
• xen_hvm_smp_prepare_cpus()
This does some IPI-related setup by calling xen_smp_intr_init() and
xen_init_lock_cpu(), which can be made conditional. And it sets the
xen_vcpu_id to XEN_VCPU_ID_INVALID for all possible CPUS, which does
need to happen.
• xen_smp_cpus_done()
This offlines any vCPUs which doesn't fit in the global shared_info
page, if separate vcpu_info placement isn't available. That part also
needs to happen regardless of vector callback support.
• xen_hvm_cpu_die()
This doesn't actually do anything other than commin_cpu_die() right
right now in the !vector_callback case; all three teardown functions
it calls should be no-ops. But to guard against future regressions
it's useful to call it anyway, and for it to explicitly check for
xen_have_vector_callback before calling those additional functions.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210106153958.584169-6-dwmw2@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b36b0fe96a ]
It's useful to be able to test non-vector event channel delivery, to make
sure Linux will work properly on older Xen which doesn't have it.
It's also useful for those working on Xen and Xen-compatible hypervisors,
because there are guest kernels still in active use which use PCI INTX
even when vector delivery is available.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210106153958.584169-4-dwmw2@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3499ba8198 ]
For a while, event channel notification via the PCI platform device
has been broken, because we attempt to communicate with xenstore before
we even have notifications working, with the xs_reset_watches() call
in xs_init().
We tend to get away with this on Xen versions below 4.0 because we avoid
calling xs_reset_watches() anyway, because xenstore might not cope with
reading a non-existent key. And newer Xen *does* have the vector
callback support, so we rarely fall back to INTX/GSI delivery.
To fix it, clean up a bit of the mess of xs_init() and xenbus_probe()
startup. Call xs_init() directly from xenbus_init() only in the !XS_HVM
case, deferring it to be called from xenbus_probe() in the XS_HVM case
instead.
Then fix up the invocation of xenbus_probe() to happen either from its
device_initcall if the callback is available early enough, or when the
callback is finally set up. This means that the hack of calling
xenbus_probe() from a workqueue after the first interrupt, or directly
from the PCI platform device setup, is no longer needed.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210113132606.422794-2-dwmw2@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c35a824c31 ]
With UBSAN enabled and building with clang, there are occasionally
warnings like
WARNING: modpost: vmlinux.o(.text+0xc533ec): Section mismatch in reference from the function arch_atomic64_or() to the variable .init.data:numa_nodes_parsed
The function arch_atomic64_or() references
the variable __initdata numa_nodes_parsed.
This is often because arch_atomic64_or lacks a __initdata
annotation or the annotation of numa_nodes_parsed is wrong.
for functions that end up not being inlined as intended but operating
on __initdata variables. Mark these as __always_inline, along with
the corresponding asm-generic wrappers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210108092024.4034860-1-arnd@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 643437b996 ]
When running is M-Mode (no MMU config), MPIE does not get set. This
results in all syscalls being executed with interrupts disabled as
handle_exception never sets SR_IE as it always sees SR_PIE being
cleared. Fix this by always force enabling interrupts in
handle_syscall when CONFIG_RISCV_M_MODE is enabled.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11f4c2e940 ]
If of_clk_init() is not called in time_init(), clock providers defined
in the system device tree are not initialized, resulting in failures for
other devices to initialize due to missing clocks.
Similarly to other architectures and to the default kernel time_init()
implementation, call of_clk_init() before executing timer_probe() in
time_init().
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
