commit 19f6fe976a upstream.
It has been reported on IRC and in KernelCI boot tests, this change breaks
internal PHY support on the Amlogic G12A/SM1 Based boards.
We suspect the added signal to reset more than the Ethernet MAC but also
the MDIO/(RG)MII mux used to redirect the MAC signals to the internal PHY.
This reverts commit f3362f0c18 while we find
and acceptable solution to cleanly reset the Ethernet MAC.
Reported-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Jérôme Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210126080951.2383740-1-narmstrong@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b8652936f upstream
We recently introduced a 1 GB sized ZONE_DMA to cater for platforms
incorporating masters that can address less than 32 bits of DMA, in
particular the Raspberry Pi 4, which has 4 or 8 GB of DRAM, but has
peripherals that can only address up to 1 GB (and its PCIe host
bridge can only access the bottom 3 GB)
Instructing the DMA layer about these limitations is straight-forward,
even though we had to fix some issues regarding memory limits set in
the IORT for named components, and regarding the handling of ACPI _DMA
methods. However, the DMA layer also needs to be able to allocate
memory that is guaranteed to meet those DMA constraints, for bounce
buffering as well as allocating the backing for consistent mappings.
This is why the 1 GB ZONE_DMA was introduced recently. Unfortunately,
it turns out the having a 1 GB ZONE_DMA as well as a ZONE_DMA32 causes
problems with kdump, and potentially in other places where allocations
cannot cross zone boundaries. Therefore, we should avoid having two
separate DMA zones when possible.
So let's do an early scan of the IORT, and only create the ZONE_DMA
if we encounter any devices that need it. This puts the burden on
the firmware to describe such limitations in the IORT, which may be
redundant (and less precise) if _DMA methods are also being provided.
However, it should be noted that this situation is highly unusual for
arm64 ACPI machines. Also, the DMA subsystem still gives precedence to
the _DMA method if implemented, and so we will not lose the ability to
perform streaming DMA outside the ZONE_DMA if the _DMA method permits
it.
[nsaenz: unified implementation with DT's counterpart]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20201119175400.9995-7-nsaenzjulienne@suse.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8424ecdde7 upstream
We recently introduced a 1 GB sized ZONE_DMA to cater for platforms
incorporating masters that can address less than 32 bits of DMA, in
particular the Raspberry Pi 4, which has 4 or 8 GB of DRAM, but has
peripherals that can only address up to 1 GB (and its PCIe host
bridge can only access the bottom 3 GB)
The DMA layer also needs to be able to allocate memory that is
guaranteed to meet those DMA constraints, for bounce buffering as well
as allocating the backing for consistent mappings. This is why the 1 GB
ZONE_DMA was introduced recently. Unfortunately, it turns out the having
a 1 GB ZONE_DMA as well as a ZONE_DMA32 causes problems with kdump, and
potentially in other places where allocations cannot cross zone
boundaries. Therefore, we should avoid having two separate DMA zones
when possible.
So, with the help of of_dma_get_max_cpu_address() get the topmost
physical address accessible to all DMA masters in system and use that
information to fine-tune ZONE_DMA's size. In the absence of addressing
limited masters ZONE_DMA will span the whole 32-bit address space,
otherwise, in the case of the Raspberry Pi 4 it'll only span the 30-bit
address space, and have ZONE_DMA32 cover the rest of the 32-bit address
space.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20201119175400.9995-6-nsaenzjulienne@suse.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a30c53573 upstream
crashkernel might reserve memory located in ZONE_DMA. We plan to delay
ZONE_DMA's initialization after unflattening the devicetree and ACPI's
boot table initialization, so move it later in the boot process.
Specifically into bootmem_init() since request_standard_resources()
depends on it.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Link: https://lore.kernel.org/r/20201119175400.9995-2-nsaenzjulienne@suse.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 718aae916f upstream.
We currently just percolate the return value from analyze_instr()
to the caller of emulate_step(), especially if it is a -1.
For one particular case (opcode = 4) for instructions that aren't
currently emulated, we are returning 'should not be single-stepped'
while we should have returned 0 which says 'did not emulate, may
have to single-step'.
Fixes: 930d6288a2 ("powerpc: sstep: Add support for maddhd, maddhdu, maddld instructions")
Signed-off-by: Ananth N Mavinakayanahalli <ananth@linux.ibm.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161157999039.64773.14950289716779364766.stgit@thinktux.local
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8813ff4960 upstream.
We currently unconditionally try to emulate newer instructions on older
Power versions that could cause issues. Gate it.
Fixes: 350779a29f ("powerpc: Handle most loads and stores in instruction emulation code")
Signed-off-by: Ananth N Mavinakayanahalli <ananth@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161157995977.64773.13794501093457185080.stgit@thinktux.local
[Dropped a few missing hunks for the backport to v5.10]
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 882213990d upstream.
Since commit 9e2369c06c ("xen: add helpers to allocate unpopulated
memory") foreign mappings are using guest physical addresses allocated
via ZONE_DEVICE functionality.
This will result in problems for the case of no balloon memory hotplug
being configured, as the p2m list will only cover the initial memory
size of the domain. Any ZONE_DEVICE allocated address will be outside
the p2m range and thus a mapping can't be established with that memory
address.
Fix that by extending the p2m size for that case. At the same time add
a check for a to be created mapping to be within the p2m limits in
order to detect errors early.
While changing a comment, remove some 32-bit leftovers.
This is XSA-369.
Fixes: 9e2369c06c ("xen: add helpers to allocate unpopulated memory")
Cc: <stable@vger.kernel.org> # 5.9
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8310b77b48 upstream.
Bailing immediately from set_foreign_p2m_mapping() upon a p2m updating
error leaves the full batch in an ambiguous state as far as the caller
is concerned. Instead flags respective slots as bad, unmapping what
was mapped there right away.
HYPERVISOR_grant_table_op()'s return value and the individual unmap
slots' status fields get used only for a one-time - there's not much we
can do in case of a failure.
Note that there's no GNTST_enomem or alike, so GNTST_general_error gets
used.
The map ops' handle fields get overwritten just to be on the safe side.
This is part of XSA-367.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/96cccf5d-e756-5f53-b91a-ea269bfb9be0@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 31680c1d15 ]
Bump 64-bit IRQ stack size to 64 KB.
I had a kernel IRQ stack overflow on the mx3210 debian buildd machine. This patch increases the
64-bit IRQ stack size to 64 KB. The 64-bit stack size needs to be larger than the 32-bit stack
size since registers are twice as big.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3c3361fe3 ]
Cascade Lake Xeon parts have the same model number as Skylake Xeon
parts, so they are tagged with the intel_pebs_isolation
quirk. However, as with Skylake Xeon H0 stepping parts, the PEBS
isolation issue is fixed in all microcode versions.
Add the Cascade Lake Xeon steppings (5, 6, and 7) to the
isolation_ucodes[] table so that these parts benefit from Andi's
optimization in commit 9b545c04ab ("perf/x86/kvm: Avoid unnecessary
work in guest filtering").
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/20210205191324.2889006-1-jmattson@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b2d8ca920 ]
On this system the M.2 PCIe WiFi card isn't detected after reboot, only
after cold boot. reboot=pci fixes this behavior. In [0] the same issue
is described, although on another system and with another Intel WiFi
card. In case it's relevant, both systems have Celeron CPUs.
Add a PCI reboot quirk on affected systems until a more generic fix is
available.
[0] https://bugzilla.kernel.org/show_bug.cgi?id=202399
[ bp: Massage commit message. ]
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1524eafd-f89c-cfa4-ed70-0bde9e45eec9@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0f02de4481 upstream.
At early boot stage, we have a whole PGDIR to map the kernel, so there
is no need to restrict the early mapping size to 128MB. Removing this
define also allows us to simplify some compile time logic.
This fixes large kernel mappings with a size greater than 128MB, as it
is the case for syzbot kernels whose size was just ~130MB.
Note that on rv64, for now, we are then limited to PGDIR size for early
mapping as we can't use PGD mappings (see [1]). That should be enough
given the relative small size of syzbot kernels compared to PGDIR_SIZE
which is 1GB.
[1] https://lore.kernel.org/lkml/20200603153608.30056-1-alex@ghiti.fr/
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb73d07148 upstream.
This is similar to commit
b21ebf2fb4 ("x86: Treat R_X86_64_PLT32 as R_X86_64_PC32")
but for i386. As far as the kernel is concerned, R_386_PLT32 can be
treated the same as R_386_PC32.
R_386_PLT32/R_X86_64_PLT32 are PC-relative relocation types which
can only be used by branches. If the referenced symbol is defined
externally, a PLT will be used.
R_386_PC32/R_X86_64_PC32 are PC-relative relocation types which can be
used by address taking operations and branches. If the referenced symbol
is defined externally, a copy relocation/canonical PLT entry will be
created in the executable.
On x86-64, there is no PIC vs non-PIC PLT distinction and an
R_X86_64_PLT32 relocation is produced for both `call/jmp foo` and
`call/jmp foo@PLT` with newer (2018) GNU as/LLVM integrated assembler.
This avoids canonical PLT entries (st_shndx=0, st_value!=0).
On i386, there are 2 types of PLTs, PIC and non-PIC. Currently,
the GCC/GNU as convention is to use R_386_PC32 for non-PIC PLT and
R_386_PLT32 for PIC PLT. Copy relocations/canonical PLT entries
are possible ABI issues but GCC/GNU as will likely keep the status
quo because (1) the ABI is legacy (2) the change will drop a GNU
ld diagnostic for non-default visibility ifunc in shared objects.
clang-12 -fno-pic (since [1]) can emit R_386_PLT32 for compiler
generated function declarations, because preventing canonical PLT
entries is weighed over the rare ifunc diagnostic.
Further info for the more interested:
https://github.com/ClangBuiltLinux/linux/issues/1210https://sourceware.org/bugzilla/show_bug.cgi?id=27169a084c0388e [1]
[ bp: Massage commit message. ]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Link: https://lkml.kernel.org/r/20210127205600.1227437-1-maskray@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7780918b36 upstream.
Back in 2.1.29 the clear_user() guts (__bzero()) had been merged
with memset(). Unfortunately, while all exception handlers had been
copied, one of the exception table entries got lost. As the result,
clear_user() starting at 128*n bytes before the end of page and
spanning between 8 and 127 bytes into the next page would oops when
the second page is unmapped. It's trivial to reproduce - all
it takes is
main()
{
int fd = open("/dev/zero", O_RDONLY);
char *p = mmap(NULL, 16384, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANON, -1, 0);
munmap(p + 8192, 8192);
read(fd, p + 8192 - 128, 192);
}
which had been oopsing since March 1997. Says something about
the quality of test coverage... ;-/ And while today sparc32 port
is nearly dead, back in '97 it had been very much alive; in fact,
sparc64 had only been in mainline for 3 months by that point...
Cc: stable@kernel.org
Fixes: v2.1.29
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a7d48886ca upstream.
In some cases we can get to fix_range_common() with mmap_sem held,
and in others we get there without it being held. For example, we
get there with it held from sys_mprotect(), and without it held
from fork_handler().
Avoid any issues in this and simply defer killing the task until
it runs the next time. Do it on the mm so that another task that
shares the same mm can't continue running afterwards.
Cc: stable@vger.kernel.org
Fixes: 468f65976a ("um: Fix hung task in fix_range_common()")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47da29763e upstream.
If userspace tries to change the stub, we need to kill it,
because otherwise it can escape the virtual machine. In a
few cases the stub checks weren't good, e.g. if userspace
just tries to
mmap(0x100000 - 0x1000, 0x3000, ...)
it could succeed to get a new private/anonymous mapping
replacing the stubs. Fix this by checking everywhere, and
checking for _overlap_, not just direct changes.
Cc: stable@vger.kernel.org
Fixes: 3963333fe6 ("uml: cover stubs with a VMA")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b29c509382 upstream.
The stck/stckf instruction used within the inline assembly within
do_account_vtime() changes the condition code. This is not reflected
with the clobber list, and therefore might result in incorrect code
generation.
It seems unlikely that the compiler could generate incorrect code
considering the surrounding C code, but it must still be fixed.
Cc: <stable@vger.kernel.org>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57fdfbce89 upstream.
Userspace Execution protection and fast syscall entry were implemented
independently from each other and were both merged in kernel 5.2,
leading to syscall entry missing userspace execution protection.
On syscall entry, execution of user space memory must be
locked in the same way as on exception entry.
Fixes: b86fb88855 ("powerpc/32: implement fast entry for syscalls on non BOOKE")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c65e105b63aaf74f91a14f845bc77192350b84a6.1612796617.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2377c92e37 upstream.
On systems with large amount of memory, loading kdump kernel through
kexec_file_load syscall may fail with the below error:
"Failed to update fdt with linux,drconf-usable-memory property"
This happens because the size estimation for kdump kernel's FDT does
not account for the additional space needed to setup usable memory
properties. Fix it by accounting for the space needed to include
linux,usable-memory & linux,drconf-usable-memory properties while
estimating kdump kernel's FDT size.
Fixes: 6ecd0163d3 ("powerpc/kexec_file: Add appropriate regions for memory reserve map")
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161243826811.119001.14083048209224609814.stgit@hbathini
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3642eb2125 upstream.
THREAD_ALIGN_SHIFT = THREAD_SHIFT + 1 = PAGE_SHIFT + 1
Maximum PAGE_SHIFT is 18 for 256k pages so
THREAD_ALIGN_SHIFT is 19 at the maximum.
No need to clobber cr1, it can be preserved when moving r1
into CR when we check stack overflow.
This reduces the number of instructions in Machine Check Exception
prolog and fixes a build failure reported by the kernel test robot
on v5.10 stable when building with RTAS + VMAP_STACK + KVM. That
build failure is due to too many instructions in the prolog hence
not fitting between 0x200 and 0x300. Allthough the problem doesn't
show up in mainline, it is still worth the change.
Fixes: 98bf2d3f49 ("powerpc/32s: Fix RTAS machine check with VMAP stack")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5ae4d545e3ac58e133d2599e0deb88843cb494fc.1612768623.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a04aead144 upstream.
In case of npt=0 on host, nSVM needs the same .inject_page_fault tweak
as VMX has, to make sure that shadow mmu faults are injected as vmexits.
It is not clear why this is needed at all, but for now keep the same
code as VMX and we'll fix it for both.
Based on a patch by Maxim Levitsky <mlevitsk@redhat.com>.
Fixes: 7c86663b68 ("KVM: nSVM: inject exceptions via svm_check_nested_events")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d2fc4c082 upstream.
The memtype seq_file iterator allocates a buffer in the ->start and ->next
functions and frees it in the ->show function. The preferred handling for
such resources is to free them in the subsequent ->next or ->stop function
call.
Since Commit 1f4aace60b ("fs/seq_file.c: simplify seq_file iteration
code and interface") there is no guarantee that ->show will be called
after ->next, so this function can now leak memory.
So move the freeing of the buffer to ->next and ->stop.
Link: https://lkml.kernel.org/r/161248539022.21478.13874455485854739066.stgit@noble1
Fixes: 1f4aace60b ("fs/seq_file.c: simplify seq_file iteration code and interface")
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f3d60f2a25 upstream.
We use the generic C VDSO implementations of a handful of clock-related
functions. When kasan is enabled this results in asan stub calls that
are unlikely to be resolved by userspace, this just disables KASAN
when building the VDSO.
Verified the fix on a kernel with KASAN enabled using vDSO selftests.
Link: https://lore.kernel.org/lkml/CACT4Y+ZNJBnkKHXUf=tm_yuowvZvHwN=0rmJ=7J+xFd+9r_6pQ@mail.gmail.com/
Tested-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
[Palmer: commit text]
Fixes: ad5d1122b8 ("riscv: use vDSO common flow to reduce the latency of the time-related functions")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a2c42bbabb upstream.
The Spectre-v4 workaround is re-configured when resuming from suspend,
as the firmware may have re-enabled the mitigation despite the user
previously asking for it to be disabled.
Enabling or disabling the workaround can result in an undefined
instruction exception on CPUs which implement PSTATE.SSBS but only allow
it to be configured by adjusting the SPSR on exception return. We handle
this by installing an 'undef hook' which effectively emulates the access.
Installing this hook requires us to take a couple of spinlocks both to
avoid corrupting the internal list of hooks but also to ensure that we
don't run into an unhandled exception. Unfortunately, when resuming from
suspend, we haven't yet called rcu_idle_exit() and so lockdep gets angry
about "suspicious RCU usage". In doing so, it tries to print a warning,
which leads it to get even more suspicious, this time about itself:
| rcu_scheduler_active = 2, debug_locks = 1
| RCU used illegally from extended quiescent state!
| 1 lock held by swapper/0:
| #0: (logbuf_lock){-.-.}-{2:2}, at: vprintk_emit+0x88/0x198
|
| Call trace:
| dump_backtrace+0x0/0x1d8
| show_stack+0x18/0x24
| dump_stack+0xe0/0x17c
| lockdep_rcu_suspicious+0x11c/0x134
| trace_lock_release+0xa0/0x160
| lock_release+0x3c/0x290
| _raw_spin_unlock+0x44/0x80
| vprintk_emit+0xbc/0x198
| vprintk_default+0x44/0x6c
| vprintk_func+0x1f4/0x1fc
| printk+0x54/0x7c
| lockdep_rcu_suspicious+0x30/0x134
| trace_lock_acquire+0xa0/0x188
| lock_acquire+0x50/0x2fc
| _raw_spin_lock+0x68/0x80
| spectre_v4_enable_mitigation+0xa8/0x30c
| __cpu_suspend_exit+0xd4/0x1a8
| cpu_suspend+0xa0/0x104
| psci_cpu_suspend_enter+0x3c/0x5c
| psci_enter_idle_state+0x44/0x74
| cpuidle_enter_state+0x148/0x2f8
| cpuidle_enter+0x38/0x50
| do_idle+0x1f0/0x2b4
Prevent these splats by running __cpu_suspend_exit() with RCU watching.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Suggested-by: "Paul E . McKenney" <paulmck@kernel.org>
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Fixes: c28762070c ("arm64: Rewrite Spectre-v4 mitigation code")
Cc: <stable@vger.kernel.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210218140346.5224-1-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5c6d0fcf9 upstream.
These plt* and .text.ftrace_trampoline sections specified for arm64 have
non-zero addressses. Non-zero section addresses in a relocatable ELF would
confuse GDB when it tries to compute the section offsets and it ends up
printing wrong symbol addresses. Therefore, set them to zero, which mirrors
the change in commit 5d8591bc0f ("module: set ksymtab/kcrctab* section
addresses to 0x0").
Reported-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Shaoying Xu <shaoyi@amazon.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210216183234.GA23876@amazon.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d47422d953 upstream.
As stated in linux/errno.h, ENOTSUPP should never be seen by user programs.
When we set up uprobe with 32-bit perf and arm64 kernel, we would see the
following vague error without useful hint.
The sys_perf_event_open() syscall returned with 524 (INTERNAL ERROR:
strerror_r(524, [buf], 128)=22)
Use EOPNOTSUPP instead to indicate such cases.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Link: https://lore.kernel.org/r/20210223082535.48730-1-zhe.he@windriver.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 656d1d58d8 upstream.
in function create_dtb(), if fdt_open_into() fails, we need to vfree
buf before return.
Fixes: 52b2a8af74 ("arm64: kexec_file: load initrd and device-tree")
Cc: stable@vger.kernel.org # v5.0
Signed-off-by: qiuguorui1 <qiuguorui1@huawei.com>
Link: https://lore.kernel.org/r/20210218125900.6810-1-qiuguorui1@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0b15c25d2 upstream.
The erratum 1024718 affects Cortex-A55 r0p0 to r2p0. However
we apply the work around for r0p0 - r1p0. Unfortunately this
won't be fixed for the future revisions for the CPU. Thus
extend the work around for all versions of A55, to cover
for r2p0 and any future revisions.
Cc: stable@vger.kernel.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210203230057.3961239-1-suzuki.poulose@arm.com
[will: Update Kconfig help text]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed5b00a05c upstream.
The "ibm,arch-vec-5-platform-support" property is a list of pairs of
bytes representing the options and values supported by the platform
firmware. At boot time, Linux scans this list and activates the
available features it recognizes : Radix and XIVE.
A recent change modified the number of entries to loop on and 8 bytes,
4 pairs of { options, values } entries are always scanned. This is
fine on KVM but not on PowerVM which can advertises less. As a
consequence on this platform, Linux reads extra entries pointing to
random data, interprets these as available features and tries to
activate them, leading to a firmware crash in
ibm,client-architecture-support.
Fix that by using the property length of "ibm,arch-vec-5-platform-support".
Fixes: ab91239942 ("powerpc/prom: Remove VLA in prom_check_platform_support()")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210122075029.797013-1-clg@kaod.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15f720aabe upstream.
Embracing a callout into instrumentation_begin() / instrumentation_begin()
does not really make sense. Make the latter instrumentation_end().
Fixes: 2f6474e463 ("x86/entry: Switch XEN/PV hypercall entry to IDTENTRY")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210210002512.106502464@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35f1c89b0c upstream.
The recent rework of probe_kernel_address() and its conversion to
get_kernel_nofault() inadvertently broke is_prefetch(). Before this
change, probe_kernel_address() was used as a sloppy "read user or
kernel memory" helper, but it doesn't do that any more. The new
get_kernel_nofault() reads *kernel* memory only, which completely broke
is_prefetch() for user access.
Adjust the code to the correct accessor based on access mode. The
manual address bounds check is no longer necessary, since the accessor
helpers (get_user() / get_kernel_nofault()) do the right thing all by
themselves. As a bonus, by using the correct accessor, the open-coded
address bounds check is not needed anymore.
[ bp: Massage commit message. ]
Fixes: eab0c6089b ("maccess: unify the probe kernel arch hooks")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/b91f7f92f3367d2d3a88eec3b09c6aab1b2dc8ef.1612924255.git.luto@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed72736183 upstream.
Force all CPUs to do VMXOFF (via NMI shootdown) during an emergency
reboot if VMX is _supported_, as VMX being off on the current CPU does
not prevent other CPUs from being in VMX root (post-VMXON). This fixes
a bug where a crash/panic reboot could leave other CPUs in VMX root and
prevent them from being woken via INIT-SIPI-SIPI in the new kernel.
Fixes: d176720d34 ("x86: disable VMX on all CPUs on reboot")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David P. Reed <dpreed@deepplum.com>
[sean: reworked changelog and further tweaked comment]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20201231002702.2223707-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aec511ad15 upstream.
Silently ignore all faults on VMXOFF in the reboot flows as such faults
are all but guaranteed to be due to the CPU not being in VMX root.
Because (a) VMXOFF may be executed in NMI context, e.g. after VMXOFF but
before CR4.VMXE is cleared, (b) there's no way to query the CPU's VMX
state without faulting, and (c) the whole point is to get out of VMX
root, eating faults is the simplest way to achieve the desired behaior.
Technically, VMXOFF can fault (or fail) for other reasons, but all other
fault and failure scenarios are mode related, i.e. the kernel would have
to magically end up in RM, V86, compat mode, at CPL>0, or running with
the SMI Transfer Monitor active. The kernel is beyond hosed if any of
those scenarios are encountered; trying to do something fancy in the
error path to handle them cleanly is pointless.
Fixes: 1e9931146c ("x86: asm/virtext.h: add cpu_vmxoff() inline function")
Reported-by: David P. Reed <dpreed@deepplum.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20201231002702.2223707-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b7ff3a447d upstream.
The shift for the phy_intf_sel bit in the system manager for gmac1 and
gmac2 should be 0.
Fixes: 2f804ba7aa ("arm64: dts: agilex: Add SysMgr to Ethernet nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df84fe9470 upstream.
Since commit f086f67485 ("arm64: ptrace: add support for syscall
emulation"), if system call number -1 is called and the process is being
traced with PTRACE_SYSCALL, for example by strace, the seccomp check is
skipped and -ENOSYS is returned unconditionally (unless altered by the
tracer) rather than carrying out action specified in the seccomp filter.
The consequence of this is that it is not possible to reliably strace
a seccomp based implementation of a foreign system call interface in
which r7/x8 is permitted to be -1 on entry to a system call.
Also trace_sys_enter and audit_syscall_entry are skipped if a system
call is skipped.
Fix by removing the in_syscall(regs) check restoring the previous
behaviour which is like AArch32, x86 (which uses generic code) and
everything else.
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Catalin Marinas<catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Fixes: f086f67485 ("arm64: ptrace: add support for syscall emulation")
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Timothy E Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Link: https://lore.kernel.org/r/90edd33b-6353-1228-791f-0336d94d5f8c@majoroak.me.uk
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a13ed1d15b upstream.
The GCM mode driver uses 16 byte aligned buffers on the stack to pass
the IV to the asm helpers, but unfortunately, the x86 port does not
guarantee that the stack pointer is 16 byte aligned upon entry in the
first place. Since the compiler is not aware of this, it will not emit
the additional stack realignment sequence that is needed, and so the
alignment is not guaranteed to be more than 8 bytes.
So instead, allocate some padding on the stack, and realign the IV
pointer by hand.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0df07d8117 upstream.
The accelerated, instruction based implementations of SHA1, SHA2 and
SHA3 are autoloaded based on CPU capabilities, given that the code is
modest in size, and widely used, which means that resolving the algo
name, loading all compatible modules and picking the one with the
highest priority is taken to be suboptimal.
However, if these algorithms are requested before this CPU feature
based matching and autoloading occurs, these modules are not even
considered, and we end up with suboptimal performance.
So add the missing module aliases for the various SHA implementations.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe82de91af upstream.
This reverts commit d9df9fb901.
For the OCTEON boards, it need to patch the built-in DTB before using
it. Previously it judges if it is a built-in DTB by checking
fw_passed_dtb. But after commit 37e5c69ffd ("MIPS: head.S: Init
fw_passed_dtb to builtin DTB", the fw_passed_dtb is initialized even
when using built-in DTB. This causes the OCTEON boards boot broken due
to an unpatched built-in DTB is used. Revert the commit d9df9fb901 to
restore the codes before the fw_passed_dtb is used and then fix this
issue.
Fixed: 37e5c69ffd ("MIPS: head.S: Init fw_passed_dtb to builtin DTB")
Cc: stable@vger.kernel.org
Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76d7fff22b upstream.
Commit ee67855ecd ("MIPS: vdso: Allow clang's --target flag in VDSO
cflags") allowed the '--target=' flag from the main Makefile to filter
through to the vDSO. However, it did not bring any of the other clang
specific flags for controlling the integrated assembler and the GNU
tools locations (--prefix=, --gcc-toolchain=, and -no-integrated-as).
Without these, we will get a warning (visible with tinyconfig):
arch/mips/vdso/elf.S:14:1: warning: DWARF2 only supports one section per
compilation unit
.pushsection .note.Linux, "a",@note ; .balign 4 ; .long 2f - 1f ; .long
4484f - 3f ; .long 0 ; 1:.asciz "Linux" ; 2:.balign 4 ; 3:
^
arch/mips/vdso/elf.S:34:2: warning: DWARF2 only supports one section per
compilation unit
.section .mips_abiflags, "a"
^
All of these flags are bundled up under CLANG_FLAGS in the main Makefile
and exported so that they can be added to Makefiles that set their own
CFLAGS. Use this value instead of filtering out '--target=' so there is
no warning and all of the tools are properly used.
Cc: stable@vger.kernel.org
Fixes: ee67855ecd ("MIPS: vdso: Allow clang's --target flag in VDSO cflags")
Link: https://github.com/ClangBuiltLinux/linux/issues/1256
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5373ae67c3 upstream.
From version 2.35, binutils can be configured with
--enable-mips-fix-loongson3-llsc=yes, which means it defaults to
-mfix-loongson3-llsc. This breaks labels which might then point at the
wrong instruction.
The workaround to explicitly pass -mno-fix-loongson3-llsc has been
added in Linux version 5.1, but is only enabled when building a Loongson
64 kernel. As vendors might use a common toolchain for building Loongson
and non-Loongson kernels, just move that workaround to
arch/mips/Makefile. At the same time update the comments to reflect the
current status.
Cc: stable@vger.kernel.org # 5.1+
Cc: YunQiang Su <syq@debian.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5360958a3 upstream.
The JZ4760 has the HPTLB as well, but has a XBurst CPU with a D0 CPUID.
Disable the HPTLB for all XBurst CPUs with a D0 CPUID. In the case where
there is no HPTLB (e.g. for older SoCs), this won't have any side
effect.
Fixes: b02efeb056 ("MIPS: Ingenic: Disable abandoned HPTLB function.")
Cc: <stable@vger.kernel.org> # 5.4
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8bfb676492 ]
"*" is missed in size determination as we are passing register set
rather than a pointer.
Fixes: dcad7854fc ("sky: switch to ->regset_get()")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d41053e8d ]
Although there has been a bit of back and forth on the subject, it
appears that invalidating TLBs requires an ISB instruction when FEAT_ETS
is not implemented by the CPU.
From the bible:
| In an implementation that does not implement FEAT_ETS, a TLB
| maintenance instruction executed by a PE, PEx, can complete at any
| time after it is issued, but is only guaranteed to be finished for a
| PE, PEx, after the execution of DSB by the PEx followed by a Context
| synchronization event
Add the missing ISB in __primary_switch, just in case.
Fixes: 3c5e9f238b ("arm64: head.S: move KASLR processing out of __enable_mmu()")
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210224093738.3629662-3-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c060c72ffe ]
Zap SPTEs that are backed by ZONE_DEVICE pages when zappings SPTEs to
rebuild them as huge pages in the TDP MMU. ZONE_DEVICE huge pages are
managed differently than "regular" pages and are not compound pages.
Likewise, PageTransCompoundMap() will not detect HugeTLB, so switch
to PageCompound().
This matches the similar check in kvm_mmu_zap_collapsible_spte.
Cc: Ben Gardon <bgardon@google.com>
Fixes: 1488199856 ("kvm: x86/mmu: Support disabling dirty logging for the tdp MMU")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210213005015.1651772-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a8ed2eaac ]
Intercept INVPCID if it's disabled in the guest, even when using NPT,
as KVM needs to inject #UD in this case.
Fixes: 4407a797e9 ("KVM: SVM: Enable INVPCID feature on AMD")
Cc: Babu Moger <babu.moger@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210212003411.1102677-2-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9abcfcb203 ]
The tls pointer must be pushed on the stack prior to calling nios2_clone
as it is the 5th function argument. Prior handling of the tls pointer was
done inside former called function copy_thread_tls using the r8 register
from the current_pt_regs directly. This was a bad design and resulted in
the current bug introduced in 04bd52fb.
Fixes: 04bd52fb ("nios2: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args")
Signed-off-by: Andreas Oetken <andreas.oetken@siemens.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c26958cb5a ]
We need to take the mmap lock around find_vma() and subsequent use of the
VMA. Otherwise, we can race with concurrent operations like munmap(), which
can lead to use-after-free accesses to freed VMAs.
Fixes: 1000197d80 ("nios2: System calls handling")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
