commit 2c669ef697 upstream.
Powerpc currently resets a CPU's idle task preempt_count to 0 before
said task starts executing the secondary startup routine (and becomes an
idle task proper).
This conflicts with commit f1a0a376ca ("sched/core: Initialize the
idle task with preemption disabled").
which initializes all of the idle tasks' preempt_count to
PREEMPT_DISABLED during smp_init(). Note that this was superfluous
before said commit, as back then the hotplug machinery would invoke
init_idle() via idle_thread_get(), which would have already reset the
CPU's idle task's preempt_count to PREEMPT_ENABLED.
Get rid of this preempt_count write.
Fixes: f1a0a376ca ("sched/core: Initialize the idle task with preemption disabled")
Reported-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210707183831.2106509-1-valentin.schneider@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a942f5780 upstream.
S390's init_idle_preempt_count(p, cpu) doesn't actually let us initialize the
preempt_count of the requested CPU's idle task: it unconditionally writes
to the current CPU's. This clearly conflicts with idle_threads_init(),
which intends to initialize *all* the idle tasks, including their
preempt_count (or their CPU's, if the arch uses a per-CPU preempt_count).
Unfortunately, it seems the way s390 does things doesn't let us initialize
every possible CPU's preempt_count early on, as the pages where this
resides are only allocated when a CPU is brought up and are freed when it
is brought down.
Let the arch-specific code set a CPU's preempt_count when its lowcore is
allocated, and turn init_idle_preempt_count() into an empty stub.
Fixes: f1a0a376ca ("sched/core: Initialize the idle task with preemption disabled")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210707163338.1623014-1-valentin.schneider@arm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0679d29d3e ]
This case of the switch statement falls through to the following case.
This appears to be on purpose, so declare it as OK.
../arch/csky/mm/syscache.c: In function '__do_sys_cacheflush':
../arch/csky/mm/syscache.c:17:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
17 | flush_icache_mm_range(current->mm,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
18 | (unsigned long)addr,
| ~~~~~~~~~~~~~~~~~~~~
19 | (unsigned long)addr + bytes);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../arch/csky/mm/syscache.c:20:2: note: here
20 | case DCACHE:
| ^~~~
Fixes: 997153b9a7 ("csky: Add flush_icache_mm to defer flush icache all")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: linux-csky@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed78f56e12 ]
In case performance stats for an nvdimm are not available, reading the
'perf_stats' sysfs file returns an -ENOENT error. A better approach is
to make the 'perf_stats' file entirely invisible to indicate that
performance stats for an nvdimm are unavailable.
So this patch updates 'papr_nd_attribute_group' to add a 'is_visible'
callback implemented as newly introduced 'papr_nd_attribute_visible()'
that returns an appropriate mode in case performance stats aren't
supported in a given nvdimm.
Also the initialization of 'papr_scm_priv.stat_buffer_len' is moved
from papr_scm_nvdimm_init() to papr_scm_probe() so that it value is
available when 'papr_nd_attribute_visible()' is called during nvdimm
initialization.
Even though 'perf_stats' attribute is available since v5.9, there are
no known user-space tools/scripts that are dependent on presence of its
sysfs file. Hence I dont expect any user-space breakage with this
patch.
Fixes: 2d02bf835e ("powerpc/papr_scm: Fetch nvdimm performance stats from PHYP")
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210513092349.285021-1-vaibhav@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f35d2f249e ]
copy-paste contains implicit "copy buffer" state that can contain
arbitrary user data (if the user process executes a copy instruction).
This could be snooped by another process if a context switch hits while
the state is live. So cp_abort is executed on context switch to clear
out possible sensitive data and prevent the leak.
cp_abort is done after the low level _switch(), which means it is never
reached by newly created tasks, so they could snoop on this buffer
between their first and second context switch.
Fix this by doing the cp_abort before calling _switch. Add some
comments which should make the issue harder to miss.
Fixes: 07d2a628bc ("powerpc/64s: Avoid cpabort in context switch when possible")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210622053036.474678-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e8554b5d7 ]
Parse to and export from UUID own type, before dereferencing.
This also fixes wrong comment (Little Endian UUID is something else)
and should eliminate the direct strict types assignments.
Fixes: 43001c52b6 ("powerpc/papr_scm: Use ibm,unit-guid as the iset cookie")
Fixes: 259a948c4b ("powerpc/pseries/scm: Use a specific endian format for storing uuid from the device tree")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210616134303.58185-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bab26238bb ]
printk_safe_flush_on_panic() has special lock breaking code for the case
where we panic()ed with the console lock held. It relies on panic IPI
causing other CPUs to mark themselves offline.
Do as most other architectures do.
This effectively reverts commit de6e5d3841 ("powerpc: smp_send_stop do
not offline stopped CPUs"), unfortunately it may result in some false
positive warnings, but the alternative is more situations where we can
crash without getting messages out.
Fixes: de6e5d3841 ("powerpc: smp_send_stop do not offline stopped CPUs")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210623041245.865134-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3729e0ec59 ]
POWER9 and POWER10 asynchronous machine checks due to stores have their
cause reported in SRR1 but SRR1[42] is set, which in other cases
indicates DSISR cause.
Check for these cases and clear SRR1[42], so the cause matching uses
the i-side (SRR1) table.
Fixes: 7b9f71f974 ("powerpc/64s: POWER9 machine check handler")
Fixes: 201220bb0e ("powerpc/powernv: Machine check handler for POWER10")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210517140355.2325406-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d3516b364 ]
APPLDATA_BASE should depend on PROC_SYSCTL instead of PROC_FS.
Building with PROC_FS but not PROC_SYSCTL causes a build error,
since appldata_base.c uses data and APIs from fs/proc/proc_sysctl.c.
arch/s390/appldata/appldata_base.o: in function `appldata_generic_handler':
appldata_base.c:(.text+0x192): undefined reference to `sysctl_vals'
Fixes: c185b783b0 ("[S390] Remove config options.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20210528002420.17634-1-rdunlap@infradead.org
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d460bb6c64 ]
In commit b02002cc4c ("s390/pci: Implement ioremap_wc/prot() with
MIO") we implemented both ioremap_wc() and ioremap_prot() however until
now we had not set HAVE_IOREMAP_PROT in Kconfig, do so now.
This also requires implementing pte_pgprot() as this is used in the
generic_access_phys() code enabled by CONFIG_HAVE_IOREMAP_PROT. As with
ioremap_wc() we need to take the MMIO Write Back bit index into account.
Moreover since the pgprot value returned from pte_pgprot() is to be used
for mappings into kernel address space we must make sure that it uses
appropriate kernel page table protection bits. In particular a pgprot
value originally coming from userspace could have the _PAGE_PROTECT
bit set to enable fault based dirty bit accounting which would then make
the mapping inaccessible when used in kernel address space.
Fixes: b02002cc4c ("s390/pci: Implement ioremap_wc/prot() with MIO")
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ceed9988a ]
irq_exit() is always called on async stack. Therefore select
HAVE_IRQ_EXIT_ON_IRQ_STACK and get a tiny optimization in
invoke_softirq().
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf02ce742f ]
When 32-bit MIPS huge page support is enabled, we halve the number of
pointers a PTE page holds, making its last half go to waste.
Correspondingly, we should halve the number of kmap entries, as we just
initialized only a single pte table for that in pagetable_init().
Fixes: 35476311e5 ("MIPS: Add partial 32-bit huge page support")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be1a540886 ]
Split up the #VC handler code into a from-user and a from-kernel part.
This allows clean and correct state tracking, as the #VC handler needs
to enter NMI-state when raised from kernel mode and plain IRQ state when
raised from user-mode.
Fixes: 62441a1fb5 ("x86/sev-es: Correctly track IRQ states in runtime #VC handler")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210618115409.22735-3-joro@8bytes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d187f21733 ]
The #VC handler only cares about IRQs being disabled while the GHCB is
active, as it must not be interrupted by something which could cause
another #VC while it holds the GHCB (NMI is the exception for which the
backup GHCB exits).
Make sure nothing interrupts the code path while the GHCB is active
by making sure that callers of __sev_{get,put}_ghcb() have disabled
interrupts upfront.
[ bp: Massage commit message. ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210618115409.22735-2-joro@8bytes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a71fabf6a ]
According to ARM DDI 0487G.a, page D13-3895, setting the PMCR_EL0.P bit to
1 has the following effect:
"Reset all event counters accessible in the current Exception level, not
including PMCCNTR_EL0, to zero."
Similar behaviour is described for AArch32 on page G8-7022. Make it so.
Fixes: c01d6a1802 ("KVM: arm64: pmu: Only handle supported event counters")
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210618105139.83795-1-alexandru.elisei@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57a3e96d6d ]
Currently tdp_mmu_map_handle_target_level() returns 0, which is
RET_PF_RETRY, when page fault is actually fixed. This makes
kvm_tdp_mmu_map() also return RET_PF_RETRY in this case, instead of
RET_PF_FIXED. Fix by initializing ret to RET_PF_FIXED.
Note that kvm_mmu_page_fault() resumes guest on both RET_PF_RETRY and
RET_PF_FIXED, which means in practice returning the two won't make
difference, so this fix alone won't be necessary for stable tree.
Fixes: bb18842e21 ("kvm: x86/mmu: Add TDP MMU PF handler")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <f9e8956223a586cd28c090879a8ff40f5eb6d609.1623717884.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 272b0a998d ]
Drop bogus logic that incorrectly clobbers the accessed/dirty enabling
status of the nested MMU on an EPTP switch. When nested EPT is enabled,
walk_mmu points at L2's _legacy_ page tables, not L1's EPT for L2.
This is likely a benign bug, as mmu->ept_ad is never consumed (since the
MMU is not a nested EPT MMU), and stuffing mmu_role.base.ad_disabled will
never propagate into future shadow pages since the nested MMU isn't used
to map anything, just to walk L2's page tables.
Note, KVM also does a full MMU reload, i.e. the guest_mmu will be
recreated using the new EPTP, and thus any change in A/D enabling will be
properly recognized in the relevant MMU.
Fixes: 41ab937274 ("KVM: nVMX: Emulate EPTP switching for the L1 hypervisor")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e75225dfa ]
Use BIT_ULL() instead of an open-coded shift to check whether or not a
function is enabled in L1's VMFUNC bitmap. This is a benign bug as KVM
supports only bit 0, and will fail VM-Enter if any other bits are set,
i.e. bits 63:32 are guaranteed to be zero.
Note, "function" is bounded by hardware as VMFUNC will #UD before taking
a VM-Exit if the function is greater than 63.
Before:
if ((vmcs12->vm_function_control & (1 << function)) == 0)
0x000000000001a916 <+118>: mov $0x1,%eax
0x000000000001a91b <+123>: shl %cl,%eax
0x000000000001a91d <+125>: cltq
0x000000000001a91f <+127>: and 0x128(%rbx),%rax
After:
if (!(vmcs12->vm_function_control & BIT_ULL(function & 63)))
0x000000000001a955 <+117>: mov 0x128(%rbx),%rdx
0x000000000001a95c <+124>: bt %rax,%rdx
Fixes: 27c42a1bb8 ("KVM: nVMX: Enable VMFUNC for the L1 hypervisor")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07ffaf343e ]
Trigger a full TLB flush on behalf of the guest on nested VM-Enter and
VM-Exit when VPID is disabled for L2. kvm_mmu_new_pgd() syncs only the
current PGD, which can theoretically leave stale, unsync'd entries in a
previous guest PGD, which could be consumed if L2 is allowed to load CR3
with PCID_NOFLUSH=1.
Rename KVM_REQ_HV_TLB_FLUSH to KVM_REQ_TLB_FLUSH_GUEST so that it can
be utilized for its obvious purpose of emulating a guest TLB flush.
Note, there is no change the actual TLB flush executed by KVM, even
though the fast PGD switch uses KVM_REQ_TLB_FLUSH_CURRENT. When VPID is
disabled for L2, vpid02 is guaranteed to be '0', and thus
nested_get_vpid02() will return the VPID that is shared by L1 and L2.
Generate the request outside of kvm_mmu_new_pgd(), as getting the common
helper to correctly identify which requested is needed is quite painful.
E.g. using KVM_REQ_TLB_FLUSH_GUEST when nested EPT is in play is wrong as
a TLB flush from the L1 kernel's perspective does not invalidate EPT
mappings. And, by using KVM_REQ_TLB_FLUSH_GUEST, nVMX can do future
simplification by moving the logic into nested_vmx_transition_tlb_flush().
Fixes: 41fab65e7c ("KVM: nVMX: Skip MMU sync on nested VMX transition when possible")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9163f01130 ]
When using CONFIG_ARM64_SW_TTBR0_PAN, a task's thread_info::ttbr0 must be
the TTBR0_EL1 value used to run userspace. With 52-bit PAs, the PA must be
packed into the TTBR using phys_to_ttbr(), but we forget to do this in some
of the SW PAN code. Thus, if the value is installed into TTBR0_EL1 (as may
happen in the uaccess routines), this could result in UNPREDICTABLE
behaviour.
Since hardware with 52-bit PA support almost certainly has HW PAN, which
will be used in preference, this shouldn't be a practical issue, but let's
fix this for consistency.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Fixes: 529c4b05a3 ("arm64: handle 52-bit addresses in TTBR")
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/1623749578-11231-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 833be850f1 ]
Depending on configuration options and specific code paths, we either
use the empty_zero_page or the configuration-dependent reserved_ttbr0
as a reserved value for TTBR{0,1}_EL1.
To simplify this code, let's always allocate and use the same
reserved_pg_dir, replacing reserved_ttbr0. Note that this is allocated
(and hence pre-zeroed), and is also marked as read-only in the kernel
Image mapping.
Keeping this separate from the empty_zero_page potentially helps with
robustness as the empty_zero_page is used in a number of cases where a
failure to map it read-only could allow it to become corrupted.
The (presently unused) swapper_pg_end symbol is also removed, and
comments are added wherever we rely on the offsets between the
pre-allocated pg_dirs to keep these cases easily identifiable.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201103102229.8542-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b82435d17 ]
In curve25519_mod_init() the curve25519_alg will be registered only when
(X86_FEATURE_BMI2 && X86_FEATURE_ADX). But in curve25519_mod_exit()
it still checks (X86_FEATURE_BMI2 || X86_FEATURE_ADX) when do crypto
unregister. This will trigger a BUG_ON in crypto_unregister_alg() as
alg->cra_refcnt is 0 if the cpu only supports one of X86_FEATURE_BMI2
and X86_FEATURE_ADX.
Fixes: 07b586fe06 ("crypto: x86/curve25519 - replace with formally verified implementation")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d06aca989c ]
Replace BIT() in x86's UAPI header with _BITUL(). BIT() is not defined
in the UAPI headers and its usage may cause userspace build errors.
Fixes: 742c45c3ec ("x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2")
Signed-off-by: Joe Richey <joerichey@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210521085849.37676-2-joerichey94@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5f320ff8a ]
gcc points out a mistake in the mca driver that goes back to before the
git history:
arch/ia64/kernel/mca_drv.c: In function 'init_record_index_pools':
arch/ia64/kernel/mca_drv.c:346:54: error: expression does not compute the number of elements in this array; element typ
e is 'int', not 'size_t' {aka 'long unsigned int'} [-Werror=sizeof-array-div]
346 | for (i = 1; i < sizeof sal_log_sect_min_sizes/sizeof(size_t); i++)
| ^
This is the same as sizeof(size_t), which is two shorter than the actual
array. Use the ARRAY_SIZE() macro to get the correct calculation instead.
Link: https://lkml.kernel.org/r/20210514214123.875971-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7560c02bdf ]
Some sorts of per-CPU clock sources have a history of going out of
synchronization with each other. However, this problem has purportedy been
solved in the past ten years. Except that it is all too possible that the
problem has instead simply been made less likely, which might mean that
some of the occasional "Marking clocksource 'tsc' as unstable" messages
might be due to desynchronization. How would anyone know?
Therefore apply CPU-to-CPU synchronization checking to newly unstable
clocksource that are marked with the new CLOCK_SOURCE_VERIFY_PERCPU flag.
Lists of desynchronized CPUs are printed, with the caveat that if it
is the reporting CPU that is itself desynchronized, it will appear that
all the other clocks are wrong. Just like in real life.
Reported-by: Chris Mason <clm@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20210527190124.440372-2-paulmck@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fa3b91bde ]
Using register asm statements has been proven to be very error prone,
especially when using code instrumentation where gcc may add function
calls, which clobbers register contents in an unexpected way.
Therefore get rid of register asm statements in kvm code, even though
there is currently nothing wrong with them. This way we know for sure
that this bug class won't be introduced here.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20210621140356.1210771-1-hca@linux.ibm.com
[borntraeger@de.ibm.com: checkpatch strict fix]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77bbbc0cf8 ]
The POWER9 vCPU TLB management code assumes all threads in a core share
a TLB, and that TLBIEL execued by one thread will invalidate TLBs for
all threads. This is not the case for SMT8 capable POWER9 and POWER10
(big core) processors, where the TLB is split between groups of threads.
This results in TLB multi-hits, random data corruption, etc.
Fix this by introducing cpu_first_tlb_thread_sibling etc., to determine
which siblings share TLBs, and use that in the guest TLB flushing code.
[npiggin@gmail.com: add changelog and comment]
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210602040441.3984352-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5740e9555 ]
Use sysfs_emit instead of snprintf to avoid buf overrun,because in
sysfs_emit it strictly checks whether buf is null or buf whether
pagesize aligned, otherwise it returns an error.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/1621497585-30887-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1a0a376ca ]
As pointed out by commit
de9b8f5dcb ("sched: Fix crash trying to dequeue/enqueue the idle thread")
init_idle() can and will be invoked more than once on the same idle
task. At boot time, it is invoked for the boot CPU thread by
sched_init(). Then smp_init() creates the threads for all the secondary
CPUs and invokes init_idle() on them.
As the hotplug machinery brings the secondaries to life, it will issue
calls to idle_thread_get(), which itself invokes init_idle() yet again.
In this case it's invoked twice more per secondary: at _cpu_up(), and at
bringup_cpu().
Given smp_init() already initializes the idle tasks for all *possible*
CPUs, no further initialization should be required. Now, removing
init_idle() from idle_thread_get() exposes some interesting expectations
with regards to the idle task's preempt_count: the secondary startup always
issues a preempt_disable(), requiring some reset of the preempt count to 0
between hot-unplug and hotplug, which is currently served by
idle_thread_get() -> idle_init().
Given the idle task is supposed to have preemption disabled once and never
see it re-enabled, it seems that what we actually want is to initialize its
preempt_count to PREEMPT_DISABLED and leave it there. Do that, and remove
init_idle() from idle_thread_get().
Secondary startups were patched via coccinelle:
@begone@
@@
-preempt_disable();
...
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210512094636.2958515-1-valentin.schneider@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7c6986ade6 upstream.
In raise_backtrace_ipi() we iterate through the cpumask of CPUs, sending
each an IPI asking them to do a backtrace, but we don't wait for the
backtrace to happen.
We then iterate through the CPU mask again, and if any CPU hasn't done
the backtrace and cleared itself from the mask, we print a trace on its
behalf, noting that the trace may be "stale".
This works well enough when a CPU is not responding, because in that
case it doesn't receive the IPI and the sending CPU is left to print the
trace. But when all CPUs are responding we are left with a race between
the sending and receiving CPUs, if the sending CPU wins the race then it
will erroneously print a trace.
This leads to spurious "stale" traces from the sending CPU, which can
then be interleaved messily with the receiving CPU, note the CPU
numbers, eg:
[ 1658.929157][ C7] rcu: Stack dump where RCU GP kthread last ran:
[ 1658.929223][ C7] Sending NMI from CPU 7 to CPUs 1:
[ 1658.929303][ C1] NMI backtrace for cpu 1
[ 1658.929303][ C7] CPU 1 didn't respond to backtrace IPI, inspecting paca.
[ 1658.929362][ C1] CPU: 1 PID: 325 Comm: kworker/1:1H Tainted: G W E 5.13.0-rc2+ #46
[ 1658.929405][ C7] irq_soft_mask: 0x01 in_mce: 0 in_nmi: 0 current: 325 (kworker/1:1H)
[ 1658.929465][ C1] Workqueue: events_highpri test_work_fn [test_lockup]
[ 1658.929549][ C7] Back trace of paca->saved_r1 (0xc0000000057fb400) (possibly stale):
[ 1658.929592][ C1] NIP: c00000000002cf50 LR: c008000000820178 CTR: c00000000002cfa0
To fix it, change the logic so that the sending CPU waits 5s for the
receiving CPU to print its trace. If the receiving CPU prints its trace
successfully then the sending CPU just continues, avoiding any spurious
"stale" trace.
This has the added benefit of allowing all CPUs to print their traces in
order and avoids any interleaving of their output.
Fixes: 5cc05910f2 ("powerpc/64s: Wire up arch_trigger_cpumask_backtrace()")
Cc: stable@vger.kernel.org # v4.18+
Reported-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210625140408.3351173-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85b18d7b5e upstream.
Turns out that the bit 61 in the TEID is not always 1 and if that's
the case the address space ID and the address are
unpredictable. Without an address and its address space ID we can't
export memory and hence we can only send a SIGSEGV to the process or
panic the kernel depending on who caused the exception.
Unfortunately bit 61 is only reliable if we have the "misc" UV feature
bit.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: 084ea4d611 ("s390/mm: add (non)secure page access exceptions handlers")
Cc: stable@vger.kernel.org
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef318b9edf upstream.
Use the MMU's role to get its effective SMEP value when injecting a fault
into the guest. When walking L1's (nested) NPT while L2 is active, vCPU
state will reflect L2, whereas NPT uses the host's (L1 in this case) CR0,
CR4, EFER, etc... If L1 and L2 have different settings for SMEP and
L1 does not have EFER.NX=1, this can result in an incorrect PFEC.FETCH
when injecting #NPF.
Fixes: e57d4a356a ("KVM: Add instruction fetch checking when walking guest page table")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 112022bdb5 upstream.
Mark NX as being used for all non-nested shadow MMUs, as KVM will set the
NX bit for huge SPTEs if the iTLB mutli-hit mitigation is enabled.
Checking the mitigation itself is not sufficient as it can be toggled on
at any time and KVM doesn't reset MMU contexts when that happens. KVM
could reset the contexts, but that would require purging all SPTEs in all
MMUs, for no real benefit. And, KVM already forces EFER.NX=1 when TDP is
disabled (for WP=0, SMEP=1, NX=0), so technically NX is never reserved
for shadow MMUs.
Fixes: b8e8c8303f ("kvm: mmu: ITLB_MULTIHIT mitigation")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51696f39cb upstream.
LLVM does not emit optimal byteswap assembly, which results in high
stack usage in kvmhv_enter_nested_guest() due to the inlining of
byteswap_pt_regs(). With LLVM 12.0.0:
arch/powerpc/kvm/book3s_hv_nested.c:289:6: error: stack frame size of
2512 bytes in function 'kvmhv_enter_nested_guest' [-Werror,-Wframe-larger-than=]
long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu)
^
1 error generated.
While this gets fixed in LLVM, mark byteswap_pt_regs() as
noinline_for_stack so that it does not get inlined and break the build
due to -Werror by default in arch/powerpc/. Not inlining saves
approximately 800 bytes with LLVM 12.0.0:
arch/powerpc/kvm/book3s_hv_nested.c:290:6: warning: stack frame size of
1728 bytes in function 'kvmhv_enter_nested_guest' [-Wframe-larger-than=]
long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu)
^
1 warning generated.
Cc: stable@vger.kernel.org # v4.20+
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1292
Link: https://bugs.llvm.org/show_bug.cgi?id=49610
Link: https://lore.kernel.org/r/202104031853.vDT0Qjqj-lkp@intel.com/
Link: https://gist.github.com/ba710e3703bf45043a31e2806c843ffd
Link: https://lore.kernel.org/r/20210621182440.990242-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b33bb78a1f upstream.
Mark #ACs that won't be reinjected to the guest as wanted by L0 so that
KVM handles split-lock #AC from L2 instead of forwarding the exception to
L1. Split-lock #AC isn't yet virtualized, i.e. L1 will treat it like a
regular #AC and do the wrong thing, e.g. reinject it into L2.
Fixes: e6f8b6c12f ("KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest")
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622172244.3561540-1-seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7749510c45 upstream.
The Ux500 HREF LEDs have not been probing properly for a
while as this was introduce:
ret = of_property_read_u32(np, "color", &led_color);
if (ret)
return ret;
Since the device tree did not define the new invented color
attribute, probe was failing.
Define color attributes for the LEDs so they work again.
Link: https://lore.kernel.org/r/20210613123356.880933-1-linus.walleij@linaro.org
Fixes: 92a81562e6 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Cc: stable@vger.kernel.org
Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25edcc50d7 upstream.
The Facility Status and Control Register is a privileged SPR that
defines the availability of some features in problem state. Since it
can be written by the guest, we must restore it to the previous host
value after guest exit.
This restoration is currently done by taking the value from
current->thread.fscr, which in the P9 path is not enough anymore
because the guest could context switch the QEMU thread, causing the
guest-current value to be saved into the thread struct.
The above situation manifested when running a QEMU linked against a
libc with System Call Vectored support, which causes scv
instructions to be run by QEMU early during the guest boot (during
SLOF), at which point the FSCR is 0 due to guest entry. After a few
scv calls (1 to a couple hundred), the context switching happens and
the QEMU thread runs with the guest value, resulting in a Facility
Unavailable interrupt.
This patch saves and restores the host value of FSCR in the inner
guest entry loop in a way independent of current->thread.fscr. The old
way of doing it is still kept in place because it works for the old
entry path.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Cc: Georgy Yakovlev <gyakovlev@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f71a53d118 upstream.
Restore CR4.LA57 to the mmu_role to fix an amusing edge case with nested
virtualization. When KVM (L0) is using TDP, CR4.LA57 is not reflected in
mmu_role.base.level because that tracks the shadow root level, i.e. TDP
level. Normally, this is not an issue because LA57 can't be toggled
while long mode is active, i.e. the guest has to first disable paging,
then toggle LA57, then re-enable paging, thus ensuring an MMU
reinitialization.
But if L1 is crafty, it can load a new CR4 on VM-Exit and toggle LA57
without having to bounce through an unpaged section. L1 can also load a
new CR3 on exit, i.e. it doesn't even need to play crazy paging games, a
single entry PML5 is sufficient. Such shenanigans are only problematic
if L0 and L1 use TDP, otherwise L1 and L2 share an MMU that gets
reinitialized on nested VM-Enter/VM-Exit due to mmu_role.base.guest_mode.
Note, in the L2 case with nested TDP, even though L1 can switch between
L2s with different LA57 settings, thus bypassing the paging requirement,
in that case KVM's nested_mmu will track LA57 in base.level.
This reverts commit 8053f924ca.
Fixes: 8053f924ca ("KVM: x86/mmu: Drop kvm_mmu_extended_role.cr4_la57 hack")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 934002cd66 upstream.
Send SEV_CMD_DECOMMISSION command to PSP firmware if ASID binding
fails. If a failure happens after a successful LAUNCH_START command,
a decommission command should be executed. Otherwise, guest context
will be unfreed inside the AMD SP. After the firmware will not have
memory to allocate more SEV guest context, LAUNCH_START command will
begin to fail with SEV_RET_RESOURCE_LIMIT error.
The existing code calls decommission inside sev_unbind_asid, but it is
not called if a failure happens before guest activation succeeds. If
sev_bind_asid fails, decommission is never called. PSP firmware has a
limit for the number of guests. If sev_asid_binding fails many times,
PSP firmware will not have resources to create another guest context.
Cc: stable@vger.kernel.org
Fixes: 59414c9892 ("KVM: SVM: Add support for KVM_SEV_LAUNCH_START command")
Reported-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Alper Gun <alpergun@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210610174604.2554090-1-alpergun@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9dfb5e390 upstream.
The XSAVE init code initializes all enabled and supported components with
XRSTOR(S) to init state. Then it XSAVEs the state of the components back
into init_fpstate which is used in several places to fill in the init state
of components.
This works correctly with XSAVE, but not with XSAVEOPT and XSAVES because
those use the init optimization and skip writing state of components which
are in init state. So init_fpstate.xsave still contains all zeroes after
this operation.
There are two ways to solve that:
1) Use XSAVE unconditionally, but that requires to reshuffle the buffer when
XSAVES is enabled because XSAVES uses compacted format.
2) Save the components which are known to have a non-zero init state by other
means.
Looking deeper, #2 is the right thing to do because all components the
kernel supports have all-zeroes init state except the legacy features (FP,
SSE). Those cannot be hard coded because the states are not identical on all
CPUs, but they can be saved with FXSAVE which avoids all conditionals.
Use FXSAVE to save the legacy FP/SSE components in init_fpstate along with
a BUILD_BUG_ON() which reminds developers to validate that a newly added
component has all zeroes init state. As a bonus remove the now unused
copy_xregs_to_kernel_booting() crutch.
The XSAVE and reshuffle method can still be implemented in the unlikely
case that components are added which have a non-zero init state and no
other means to save them. For now, FXSAVE is just simple and good enough.
[ bp: Fix a typo or two in the text. ]
Fixes: 6bad06b768 ("x86, xsave: Use xsaveopt in context-switch path when supported")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210618143444.587311343@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9301982c42 upstream.
sanitize_restored_user_xstate() preserves the supervisor states only
when the fx_only argument is zero, which allows unprivileged user space
to put supervisor states back into init state.
Preserve them unconditionally.
[ bp: Fix a typo or two in the text. ]
Fixes: 5d6b6a6f9b ("x86/fpu/xstate: Update sanitize_restored_xstate() for supervisor xstates")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210618143444.438635017@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67147e96a3 upstream.
The CALL_ON_STACK macro is used to call a C function from inline
assembly, and therefore must consider the C ABI, which says that only
registers 6-13, and 15 are non-volatile (restored by the called
function).
The inline assembly incorrectly marks all registers used to pass
parameters to the called function as read-only input operands, instead
of operands that are read and written to. This might result in
register corruption depending on usage, compiler, and compile options.
Fix this by marking all operands used to pass parameters as read/write
operands. To keep the code simple even register 6, if used, is marked
as read-write operand.
Fixes: ff340d2472 ("s390: add stack switch helper")
Cc: <stable@kernel.org> # 4.20
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
