[ Upstream commit bb430b6942 ]
LOOP_CONFIGURE is, as far as I understand it, supposed to be a way to
combine LOOP_SET_FD and LOOP_SET_STATUS64 into a single syscall. When
using LOOP_SET_FD+LOOP_SET_STATUS64, a single uevent would be sent for
each partition found on the loop device after the second ioctl(), but
when using LOOP_CONFIGURE, no such uevent was being sent.
In the old setup, uevents are disabled for LOOP_SET_FD, but not for
LOOP_SET_STATUS64. This makes sense, as it prevents uevents being
sent for a partially configured device during LOOP_SET_FD - they're
only sent at the end of LOOP_SET_STATUS64. But for LOOP_CONFIGURE,
uevents were disabled for the entire operation, so that final
notification was never issued. To fix this, reduce the critical
section to exclude the loop_reread_partitions() call, which causes
the uevents to be issued, to after uevents are re-enabled, matching
the behaviour of the LOOP_SET_FD+LOOP_SET_STATUS64 combination.
I noticed this because Busybox's losetup program recently changed from
using LOOP_SET_FD+LOOP_SET_STATUS64 to LOOP_CONFIGURE, and this broke
my setup, for which I want a notification from the kernel any time a
new partition becomes available.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
[hch: reduced the critical section]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixes: 3448914e8c ("loop: Add LOOP_CONFIGURE ioctl")
Link: https://lore.kernel.org/r/20230320125430.55367-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 498ef5c777 ]
Currently, udev change event is generated for a loop device before the
device is ready for IO. Due to serialization on lo->lo_mutex in
lo_open() this does not matter because anybody is able to open the
device and do IO only after the configuration is finished. However this
synchronization in lo_open() is going away so make sure userspace
reacting to the change event will see the new device state by generating
the event only when the device is setup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: bb430b6942 ("loop: LOOP_CONFIGURE: send uevents for partitions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6030363199 ]
In vdc_port_probe(), we should check the return value of mdesc_grab() as
it may return NULL, which can cause potential NPD bug.
Fixes: 43fdf27470 ("[SPARC64]: Abstract out mdesc accesses for better MD update handling.")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20230315062032.1741692-1-windhl@126.com
[axboe: style cleanup]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63f8865970 ]
When injecting a fake timeout into the null_blk driver using
fail_io_timeout, the request timeout handler does not execute
blk_mq_complete_request(), so the complete callback is never executed
for a timedout request.
The null_blk driver also has a driver-specific fake timeout mechanism
which does not have this problem. Fix the problem with fail_io_timeout
by using the same meachanism as null_blk internal timeout feature, using
the fake_timeout field of null_blk commands.
Reported-by: Akinobu Mita <akinobu.mita@gmail.com>
Fixes: de3510e52b ("null_blk: fix command timeout completion handling")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230314041106.19173-2-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b0cb770f5 ]
do_req_filebacked() calls blk_mq_complete_request() synchronously or
asynchronously when using asynchronous I/O unless memory allocation fails.
Hence, modify loop_handle_cmd() such that it does not dereference 'cmd' nor
'rq' after do_req_filebacked() finished unless we are sure that the request
has not yet been completed. This patch fixes the following kernel crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000054
Call trace:
css_put.42938+0x1c/0x1ac
loop_process_work+0xc8c/0xfd4
loop_rootcg_workfn+0x24/0x34
process_one_work+0x244/0x558
worker_thread+0x400/0x8fc
kthread+0x16c/0x1e0
ret_from_fork+0x10/0x20
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dan Schatzberg <schatzberg.dan@gmail.com>
Fixes: c74d40e8b5 ("loop: charge i/o to mem and blk cg")
Fixes: bc07c10a36 ("block: loop: support DIO & AIO")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230314182155.80625-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a852a693f ]
The bdev parameter to ->ioctl contains the block device that the ioctl
is called on, which can be the partition. But the openers check in
nbd_bdev_reset really needs to check use the whole device, so switch to
using that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: e5cfefa97b ("block: fix scan partition for exclusively open device again")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67205f80be ]
By default, non-mq drivers do not support nowait. This causes io_uring
to use a slower path as the driver cannot be trust not to block. brd
can safely set the nowait flag, as worst case all it does is a NOIO
allocation.
For io_uring, this makes a substantial difference. Before:
submitter=0, tid=453, file=/dev/ram0, node=-1
polled=0, fixedbufs=1/0, register_files=1, buffered=0, QD=128
Engine=io_uring, sq_ring=128, cq_ring=128
IOPS=440.03K, BW=1718MiB/s, IOS/call=32/31
IOPS=428.96K, BW=1675MiB/s, IOS/call=32/32
IOPS=442.59K, BW=1728MiB/s, IOS/call=32/31
IOPS=419.65K, BW=1639MiB/s, IOS/call=32/32
IOPS=426.82K, BW=1667MiB/s, IOS/call=32/31
and after:
submitter=0, tid=354, file=/dev/ram0, node=-1
polled=0, fixedbufs=1/0, register_files=1, buffered=0, QD=128
Engine=io_uring, sq_ring=128, cq_ring=128
IOPS=3.37M, BW=13.15GiB/s, IOS/call=32/31
IOPS=3.45M, BW=13.46GiB/s, IOS/call=32/31
IOPS=3.43M, BW=13.42GiB/s, IOS/call=32/32
IOPS=3.43M, BW=13.39GiB/s, IOS/call=32/31
IOPS=3.43M, BW=13.38GiB/s, IOS/call=32/31
or about an 8x in difference. Now that brd is prepared to deal with
REQ_NOWAIT reads/writes, mark it as supporting that.
Cc: stable@vger.kernel.org # 5.10+
Link: https://lore.kernel.org/linux-block/20230203103005.31290-1-p.raghav@samsung.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1528830bd ]
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211015235219.2191207-2-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 67205f80be ("brd: mark as nowait compatible")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f6ad5d533 ]
In loop_set_status_from_info(), lo->lo_offset and lo->lo_sizelimit should
be checked before reassignment, because if an overflow error occurs, the
original correct value will be changed to the wrong value, and it will not
be changed back.
More, the original patch did not solve the problem, the value was set and
ioctl returned an error, but the subsequent io used the value in the loop
driver, which still caused an alarm:
loop_handle_cmd
do_req_filebacked
loff_t pos = ((loff_t) blk_rq_pos(rq) << 9) + lo->lo_offset;
lo_rw_aio
cmd->iocb.ki_pos = pos
Fixes: c490a0b5a4 ("loop: Check for overflow while configuring loop")
Signed-off-by: Zhong Jinghua <zhongjinghua@huawei.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230221095027.3656193-1-zhongjinghua@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f7c4d9b133 upstream.
If getting an ID or setting up a work queue in rbd_dev_create() fails,
use-after-free on rbd_dev->rbd_client, rbd_dev->spec and rbd_dev->opts
is triggered in do_rbd_add(). The root cause is that the ownership of
these structures is transfered to rbd_dev prematurely and they all end
up getting freed when rbd_dev_create() calls rbd_dev_free() prior to
returning to do_rbd_add().
Found by Linux Verification Center (linuxtesting.org) with SVACE, an
incomplete patch submitted by Natalia Petrova <n.petrova@fintech.ru>.
Cc: stable@vger.kernel.org
Fixes: 1643dfa4c2 ("rbd: introduce a per-device ordered workqueue")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db0ccc44a2 upstream.
It currently returns a page, but callers just check for NULL/page to
gauge success. Clean this up and return the appropriate error directly
instead.
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 858f1bf65d upstream.
When 'index' is a big numbers, it may become negative which forced
to 'int'. then 'index << part_shift' might overflow to a positive
value that is not greater than '0xfffff', then sysfs might complains
about duplicate creation. Because of this, move the 'index' judgment
to the front will fix it and be better.
Fixes: b0d9111a2d ("nbd: use an idr to keep track of nbd devices")
Fixes: 940c264984 ("nbd: fix possible overflow for 'first_minor' in nbd_dev_add()")
Signed-off-by: Zhang Wensheng <zhangwensheng5@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220521073749.3146892-6-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Wen Yang <wenyang.linux@foxmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 613b14884b upstream.
This can't happen right now, but in preparation for allowing
bio_split_to_limits() returning NULL if it ended the bio, check for it
in all the callers.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85c5019771 upstream.
Currently, the max_loop commandline argument can be used to specify how
many loop block devices are created at init time. If it is not
specified on the commandline, CONFIG_BLK_DEV_LOOP_MIN_COUNT loop block
devices will be created.
The max_loop commandline argument can be used to override the value of
CONFIG_BLK_DEV_LOOP_MIN_COUNT. However, when max_loop is set to 0
through the commandline, the current logic treats it as if it had not
been set, and creates CONFIG_BLK_DEV_LOOP_MIN_COUNT devices anyway.
Fix this by starting max_loop off as set to CONFIG_BLK_DEV_LOOP_MIN_COUNT.
This preserves the intended behavior of creating
CONFIG_BLK_DEV_LOOP_MIN_COUNT loop block devices if the max_loop
commandline parameter is not specified, and allowing max_loop to
be respected for all values, including 0.
This allows environments that can create all of their required loop
block devices on demand to not have to unnecessarily preallocate loop
block devices.
Fixes: 7328508274 ("remove artificial software max_loop limit")
Cc: stable@vger.kernel.org
Cc: Ken Chen <kenchen@google.com>
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Link: https://lore.kernel.org/r/20221208212902.765781-1-isaacmanjarres@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8692814b77 ]
A submitter workqueue is dynamically allocated by init_submitter()
called by drbd_create_device(), we should destroy it when this
device is not needed or destroyed.
Fixes: 113fef9e20 ("drbd: prepare to queue write requests on a submit worker")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221124015817.2729789-3-bobo.shaobowang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e7b854e4c ]
This revert c2258ffc56 ("drbd: poison free'd device, resource and
connection structs"), add memset is odd here for debugging, there are
some methods to accurately show what happened, such as kdump.
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221124015817.2729789-2-bobo.shaobowang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 8692814b77 ("drbd: destroy workqueue when drbd device was freed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7a1598189 ]
The drbd_destroy_connection() frees the "connection" so use the _safe()
iterator to prevent a use after free.
Fixes: b6f85ef953 ("drbd: Iterate over all connections")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/Y3Jd5iZRbNQ9w6gm@kili
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1de7c3cf48 ]
syzbot reported hung task [1]. The following program is a simplified
version of the reproducer:
int main(void)
{
int sv[2], fd;
if (socketpair(AF_UNIX, SOCK_STREAM, 0, sv) < 0)
return 1;
if ((fd = open("/dev/nbd0", 0)) < 0)
return 1;
if (ioctl(fd, NBD_SET_SIZE_BLOCKS, 0x81) < 0)
return 1;
if (ioctl(fd, NBD_SET_SOCK, sv[0]) < 0)
return 1;
if (ioctl(fd, NBD_DO_IT) < 0)
return 1;
return 0;
}
When signal interrupt nbd_start_device_ioctl() waiting the condition
atomic_read(&config->recv_threads) == 0, the task can hung because it
waits the completion of the inflight IOs.
This patch fixes the issue by clearing queue, not just shutdown, when
signal interrupt nbd_start_device_ioctl().
Link: https://syzkaller.appspot.com/bug?id=7d89a3ffacd2b83fdd39549bc4d8e0a89ef21239 [1]
Reported-by: syzbot+38e6c55d4969a14c1534@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220907163502.577561-1-syoshida@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fe8f65b018 upstream.
Xen blkfront advertises its support of the persistent grants feature
when it first setting up and when resuming in 'talk_to_blkback()'.
Then, blkback reads the advertised value when it connects with blkfront
and decides if it will use the persistent grants feature or not, and
advertises its decision to blkfront. Blkfront reads the blkback's
decision and it also makes the decision for the use of the feature.
Commit 402c43ea6b ("xen-blkfront: Apply 'feature_persistent' parameter
when connect"), however, made the blkfront's read of the parameter for
disabling the advertisement, namely 'feature_persistent', to be done
when it negotiate, not when advertise. Therefore blkfront advertises
without reading the parameter. As the field for caching the parameter
value is zero-initialized, it always advertises as the feature is
disabled, so that the persistent grants feature becomes always disabled.
This commit fixes the issue by making the blkfront does parmeter caching
just before the advertisement.
Fixes: 402c43ea6b ("xen-blkfront: Apply 'feature_persistent' parameter when connect")
Cc: <stable@vger.kernel.org> # 5.10.x
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220831165824.94815-4-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f5e0fe5d0 upstream.
The advertisement of the persistent grants feature (writing
'feature-persistent' to xenbus) should mean not the decision for using
the feature but only the availability of the feature. However, commit
74a852479c ("xen-blkfront: add a parameter for disabling of persistent
grants") made a field of blkfront, which was a place for saving only the
negotiation result, to be used for yet another purpose: caching of the
'feature_persistent' parameter value. As a result, the advertisement,
which should follow only the parameter value, becomes inconsistent.
This commit fixes the misuse of the semantic by making blkfront saves
the parameter value in a separate place and advertises the support based
on only the saved value.
Fixes: 74a852479c ("xen-blkfront: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220831165824.94815-3-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 06ba5d2e94 upstream.
The advertisement of the persistent grants feature (writing
'feature-persistent' to xenbus) should mean not the decision for using
the feature but only the availability of the feature. However, commit
aac8a70db2 ("xen-blkback: add a parameter for disabling of persistent
grants") made a field of blkback, which was a place for saving only the
negotiation result, to be used for yet another purpose: caching of the
'feature_persistent' parameter value. As a result, the advertisement,
which should follow only the parameter value, becomes inconsistent.
This commit fixes the misuse of the semantic by making blkback saves the
parameter value in a separate place and advertises the support based on
only the saved value.
Fixes: aac8a70db2 ("xen-blkback: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220831165824.94815-2-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c490a0b5a4 upstream.
The userspace can configure a loop using an ioctl call, wherein
a configuration of type loop_config is passed (see lo_ioctl()'s
case on line 1550 of drivers/block/loop.c). This proceeds to call
loop_configure() which in turn calls loop_set_status_from_info()
(see line 1050 of loop.c), passing &config->info which is of type
loop_info64*. This function then sets the appropriate values, like
the offset.
loop_device has lo_offset of type loff_t (see line 52 of loop.c),
which is typdef-chained to long long, whereas loop_info64 has
lo_offset of type __u64 (see line 56 of include/uapi/linux/loop.h).
The function directly copies offset from info to the device as
follows (See line 980 of loop.c):
lo->lo_offset = info->lo_offset;
This results in an overflow, which triggers a warning in iomap_iter()
due to a call to iomap_iter_done() which has:
WARN_ON_ONCE(iter->iomap.offset > iter->pos);
Thus, check for negative value during loop_set_status_from_info().
Bug report: https://syzkaller.appspot.com/bug?id=c620fe14aac810396d3c3edc9ad73848bf69a29e
Reported-and-tested-by: syzbot+a8e049cd3abd342936b6@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220823160810.181275-1-code@siddh.me
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dc89997264 ]
Always use crypto_has_comp() so that crypto can lookup module, call
usermodhelper to load the modules, wait for usermodhelper to finish and so
on. Otherwise crypto will do all of these steps under CPU hot-plug lock
and this looks like too much stuff to handle under the CPU hot-plug lock.
Besides this can end up in a deadlock when usermodhelper triggers a code
path that attempts to lock the CPU hot-plug lock, that zram already holds.
An example of such deadlock:
- path A. zram grabs CPU hot-plug lock, execs /sbin/modprobe from crypto
and waits for modprobe to finish
disksize_store
zcomp_create
__cpuhp_state_add_instance
__cpuhp_state_add_instance_cpuslocked
zcomp_cpu_up_prepare
crypto_alloc_base
crypto_alg_mod_lookup
call_usermodehelper_exec
wait_for_completion_killable
do_wait_for_common
schedule
- path B. async work kthread that brings in scsi device. It wants to
register CPUHP states at some point, and it needs the CPU hot-plug
lock for that, which is owned by zram.
async_run_entry_fn
scsi_probe_and_add_lun
scsi_mq_alloc_queue
blk_mq_init_queue
blk_mq_init_allocated_queue
blk_mq_realloc_hw_ctxs
__cpuhp_state_add_instance
__cpuhp_state_add_instance_cpuslocked
mutex_lock
schedule
- path C. modprobe sleeps, waiting for all aync works to finish.
load_module
do_init_module
async_synchronize_full
async_synchronize_cookie_domain
schedule
[senozhatsky@chromium.org: add comment]
Link: https://lkml.kernel.org/r/20220624060606.1014474-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20220622023501.517125-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 402c43ea6b upstream.
In some use cases[1], the backend is created while the frontend doesn't
support the persistent grants feature, but later the frontend can be
changed to support the feature and reconnect. In the past, 'blkback'
enabled the persistent grants feature since it unconditionally checked
if frontend supports the persistent grants feature for every connect
('connect_ring()') and decided whether it should use persistent grans or
not.
However, commit aac8a70db2 ("xen-blkback: add a parameter for
disabling of persistent grants") has mistakenly changed the behavior.
It made the frontend feature support check to not be repeated once it
shown the 'feature_persistent' as 'false', or the frontend doesn't
support persistent grants.
Similar behavioral change has made on 'blkfront' by commit 74a852479c
("xen-blkfront: add a parameter for disabling of persistent grants").
This commit changes the behavior of the parameter to make effect for
every connect, so that the previous behavior of 'blkfront' can be
restored.
[1] https://lore.kernel.org/xen-devel/CAJwUmVB6H3iTs-C+U=v-pwJB7-_ZRHPxHzKRJZ22xEPW7z8a=g@mail.gmail.com/
Fixes: 74a852479c ("xen-blkfront: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220715225108.193398-4-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e94c6101e1 upstream.
In some use cases[1], the backend is created while the frontend doesn't
support the persistent grants feature, but later the frontend can be
changed to support the feature and reconnect. In the past, 'blkback'
enabled the persistent grants feature since it unconditionally checked
if frontend supports the persistent grants feature for every connect
('connect_ring()') and decided whether it should use persistent grans or
not.
However, commit aac8a70db2 ("xen-blkback: add a parameter for
disabling of persistent grants") has mistakenly changed the behavior.
It made the frontend feature support check to not be repeated once it
shown the 'feature_persistent' as 'false', or the frontend doesn't
support persistent grants.
This commit changes the behavior of the parameter to make effect for
every connect, so that the previous workflow can work again as expected.
[1] https://lore.kernel.org/xen-devel/CAJwUmVB6H3iTs-C+U=v-pwJB7-_ZRHPxHzKRJZ22xEPW7z8a=g@mail.gmail.com/
Reported-by: Andrii Chepurnyi <andrii.chepurnyi82@gmail.com>
Fixes: aac8a70db2 ("xen-blkback: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220715225108.193398-3-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc9be616bb upstream.
Persistent grants feature can be used only when both backend and the
frontend supports the feature. The feature was always supported by
'blkback', but commit aac8a70db2 ("xen-blkback: add a parameter for
disabling of persistent grants") has introduced a parameter for
disabling it runtime.
To avoid the parameter be updated while being used by 'blkback', the
commit caches the parameter into 'vbd->feature_gnt_persistent' in
'xen_vbd_create()', and then check if the guest also supports the
feature and finally updates the field in 'connect_ring()'.
However, 'connect_ring()' could be called before 'xen_vbd_create()', so
later execution of 'xen_vbd_create()' can wrongly overwrite 'true' to
'vbd->feature_gnt_persistent'. As a result, 'blkback' could try to use
'persistent grants' feature even if the guest doesn't support the
feature.
This commit fixes the issue by moving the parameter value caching to
'xen_blkif_alloc()', which allocates the 'blkif'. Because the struct
embeds 'vbd' object, which will be used by 'connect_ring()' later, this
should be called before 'connect_ring()' and therefore this should be
the right and safe place to do the caching.
Fixes: aac8a70db2 ("xen-blkback: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220715225108.193398-2-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ee452a8d98 ]
There needs to be some error checking if ida_simple_get() fails.
Also call ida_free() if there are errors later.
Fixes: 94bc02e30f ("nullb: use ida to manage index")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YtEhXsr6vJeoiYhd@kili
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bc14f3101 ]
After setting keep_id if the mutex trylock fails, the keep_id stays set
for the rest of the sess_dev lifetime.
Therefore, set keep_id to true after mutex_trylock succeeds, so that a
failure of trylock does'nt touch keep_id.
Fixes: b168e1d85c ("block/rnbd-srv: Prevent a deadlock generated by accessing sysfs in parallel")
Cc: gi-oh.kim@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20220707143122.460362-2-haris.iqbal@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae4c81644e ]
rtrs_srv_sess is used for paths and not sessions on the server side. This
creates confusion so let's rename it to rtrs_srv_path. Also, rename
related variables and functions.
Coccinelle is used to do the transformations for most of the occurrences
and remaining ones were handled manually.
Link: https://lore.kernel.org/r/20220105180708.7774-3-jinpu.wang@ionos.com
Signed-off-by: Vaishali Thakkar <vaishali.thakkar@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0466a39bd0 upstream.
This was found by coccicheck:
./drivers/block/virtio_blk.c, 334, 14-17, WARNING Unsigned expression
compared with zero num < 0
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Link: https://lore.kernel.org/r/20211117063955.160777-1-ye.guojin@zte.com.cn
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 02746e26c3 ("virtio-blk: avoid preallocating big SGL for data")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ae4d37b5df ]
The bug is here:
idr_remove(&connection->peer_devices, vnr);
If the previous for_each_connection() don't exit early (no goto hit
inside the loop), the iterator 'connection' after the loop will be a
bogus pointer to an invalid structure object containing the HEAD
(&resource->connections). As a result, the use of 'connection' above
will lead to a invalid memory access (including a possible invalid free
as idr_remove could call free_layer).
The original intention should have been to remove all peer_devices,
but the following lines have already done the work. So just remove
this line and the unneeded label, to fix this bug.
Cc: stable@vger.kernel.org
Fixes: c06ece6ba6 ("drbd: Turn connection->volumes into connection->peer_devices")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27548088ac ]
In drbd_create_device(), the 'out_no_io_page' lable has called
blk_cleanup_disk() when return failed.
So remove the 'out_cleanup_disk' lable to avoid double free the
disk pointer.
Fixes: e92ab4eda5 ("drbd: add error handling support for add_disk()")
Signed-off-by: Wu Bo <wubo40@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/1636013229-26309-1-git-send-email-wubo40@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e92ab4eda5 ]
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02746e26c3 ]
No need to pre-allocate a big buffer for the IO SGL anymore. If a device
has lots of deep queues, preallocation for the sg list can consume
substantial amounts of memory. For HW virtio-blk device, nr_hw_queues
can be 64 or 128 and each queue's depth might be 128. This means the
resulting preallocation for the data SGLs is big.
Switch to runtime allocation for SGL for lists longer than 2 entries.
This is the approach used by NVMe drivers so it should be reasonable for
virtio block as well. Runtime SGL allocation has always been the case
for the legacy I/O path so this is nothing new.
The preallocated small SGL depends on SG_CHAIN so if the ARCH doesn't
support SG_CHAIN, use only runtime allocation for the SGL.
Re-organize the setup of the IO request to fit the new sg chain
mechanism.
No performance degradation was seen (fio libaio engine with 16 jobs and
128 iodepth):
IO size IOPs Rand Read (before/after) IOPs Rand Write (before/after)
-------- --------------------------------- ----------------------------------
512B 318K/316K 329K/325K
4KB 323K/321K 353K/349K
16KB 199K/208K 250K/275K
128KB 36K/36.1K 39.2K/41.7K
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Link: https://lore.kernel.org/r/20210901131434.31158-1-mgurtovoy@nvidia.com
Reviewed-by: Feng Li <lifeng1519@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de> # kconfig fixups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2400617da7 upstream.
Split the current bounce buffering logic used with persistent grants
into it's own option, and allow enabling it independently of
persistent grants. This allows to reuse the same code paths to
perform the bounce buffering required to avoid leaking contiguous data
in shared pages not part of the request fragments.
Reporting whether the backend is to be trusted can be done using a
module parameter, or from the xenstore frontend path as set by the
toolstack when adding the device.
This is CVE-2022-33742, part of XSA-403.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f446ffe9d upstream.
When allocating pages to be used for shared communication with the
backend always zero them, this avoids leaking unintended data present
on the pages.
This is CVE-2022-26365, part of XSA-403.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 09dadb5985 ]
In our tests, "qemu-nbd" triggers a io hung:
INFO: task qemu-nbd:11445 blocked for more than 368 seconds.
Not tainted 5.18.0-rc3-next-20220422-00003-g2176915513ca #884
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:qemu-nbd state:D stack: 0 pid:11445 ppid: 1 flags:0x00000000
Call Trace:
<TASK>
__schedule+0x480/0x1050
? _raw_spin_lock_irqsave+0x3e/0xb0
schedule+0x9c/0x1b0
blk_mq_freeze_queue_wait+0x9d/0xf0
? ipi_rseq+0x70/0x70
blk_mq_freeze_queue+0x2b/0x40
nbd_add_socket+0x6b/0x270 [nbd]
nbd_ioctl+0x383/0x510 [nbd]
blkdev_ioctl+0x18e/0x3e0
__x64_sys_ioctl+0xac/0x120
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fd8ff706577
RSP: 002b:00007fd8fcdfebf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000040000000 RCX: 00007fd8ff706577
RDX: 000000000000000d RSI: 000000000000ab00 RDI: 000000000000000f
RBP: 000000000000000f R08: 000000000000fbe8 R09: 000055fe497c62b0
R10: 00000002aff20000 R11: 0000000000000246 R12: 000000000000006d
R13: 0000000000000000 R14: 00007ffe82dc5e70 R15: 00007fd8fcdff9c0
"qemu-ndb -d" will call ioctl 'NBD_DISCONNECT' first, however, following
message was found:
block nbd0: Send disconnect failed -32
Which indicate that something is wrong with the server. Then,
"qemu-nbd -d" will call ioctl 'NBD_CLEAR_SOCK', however ioctl can't clear
requests after commit 2516ab1543fd("nbd: only clear the queue on device
teardown"). And in the meantime, request can't complete through timeout
because nbd_xmit_timeout() will always return 'BLK_EH_RESET_TIMER', which
means such request will never be completed in this situation.
Now that the flag 'NBD_CMD_INFLIGHT' can make sure requests won't
complete multiple times, switch back to call nbd_clear_sock() in
nbd_clear_sock_ioctl(), so that inflight requests can be cleared.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220521073749.3146892-5-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c55b2b983b ]
When nbd module is being removing, nbd_alloc_config() may be
called concurrently by nbd_genl_connect(), although try_module_get()
will return false, but nbd_alloc_config() doesn't handle it.
The race may lead to the leak of nbd_config and its related
resources (e.g, recv_workq) and oops in nbd_read_stat() due
to the unload of nbd module as shown below:
BUG: kernel NULL pointer dereference, address: 0000000000000040
Oops: 0000 [#1] SMP PTI
CPU: 5 PID: 13840 Comm: kworker/u17:33 Not tainted 5.14.0+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: knbd16-recv recv_work [nbd]
RIP: 0010:nbd_read_stat.cold+0x130/0x1a4 [nbd]
Call Trace:
recv_work+0x3b/0xb0 [nbd]
process_one_work+0x1ed/0x390
worker_thread+0x4a/0x3d0
kthread+0x12a/0x150
ret_from_fork+0x22/0x30
Fixing it by checking the return value of try_module_get()
in nbd_alloc_config(). As nbd_alloc_config() may return ERR_PTR(-ENODEV),
assign nbd->config only when nbd_alloc_config() succeeds to ensure
the value of nbd->config is binary (valid or NULL).
Also adding a debug message to check the reference counter
of nbd_config during module removal.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220521073749.3146892-3-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62952cc5bc ]
The discard_alignment queue limit is named a bit misleading means the
offset into the block device at which the discard granularity starts.
On the other hand the discard_sector_alignment from the virtio 1.1 looks
similar to what Linux uses as discard granularity (even if not very well
described):
"discard_sector_alignment can be used by OS when splitting a request
based on alignment. "
And at least qemu does set it to the discard granularity.
So stop setting the discard_alignment and use the virtio
discard_sector_alignment to set the discard granularity.
Fixes: 1f23816b8e ("virtio_blk: add discard and write zeroes support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220418045314.360785-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33cb0917bb ]
There are two initializers for P_RETRY_WRITE:
drivers/block/drbd/drbd_main.c:3676:22: warning: initialized field overwritten [-Woverride-init]
Remove the first one since it was already ignored by the compiler
and reorder the list to match the enum definition. As P_ZEROES had
no entry, add that one instead.
Fixes: 036b17eaab ("drbd: Receiving part for the PROTOCOL_UPDATE packet")
Fixes: f31e583aa2 ("drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire")")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220406190715.1938174-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 491bf8f236 ]
When userspace closes the socket before sending a disconnect
request, the following I/O requests will be blocked in
wait_for_reconnect() until dead timeout. This will cause the
following disconnect request also hung on blk_mq_quiesce_queue().
That means we have no way to disconnect a nbd device if there
are some I/O requests waiting for reconnecting until dead timeout.
It's not expected. So let's wake up the thread waiting for
reconnecting directly when a disconnect request is sent.
Reported-by: Xu Jianhai <zero.xu@bytedance.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220322080639.142-1-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 901aeda62e ]
In preparation to limit the scope of a list iterator to the list
traversal loop, use a dedicated pointer to iterate through the list [1].
Since that variable should not be used past the loop iteration, a
separate variable is used to 'remember the current location within the
loop'.
To either continue iterating from that position or skip the iteration
(if the previous iteration was complete) list_prepare_entry() is used.
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220331220349.885126-1-jakobkoschel@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f71f01394f upstream.
Interrupt handler bad_flp_intr() may cause a UAF on the recently freed
request just to increment the error count. There's no point keeping
that one in the request anyway, and since the interrupt handler uses a
static pointer to the error which cannot be kept in sync with the
pending request, better make it use a static error counter that's reset
for each new request. This reset now happens when entering
redo_fd_request() for a new request via set_next_request().
One initial concern about a single error counter was that errors on one
floppy drive could be reported on another one, but this problem is not
real given that the driver uses a single drive at a time, as that
PC-compatible controllers also have this limitation by using shared
signals. As such the error count is always for the "current" drive.
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Tested-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 233087ca06 upstream.
Minh Yuan reported a concurrency use-after-free issue in the floppy code
between raw_cmd_ioctl and seek_interrupt.
[ It turns out this has been around, and that others have reported the
KASAN splats over the years, but Minh Yuan had a reproducer for it and
so gets primary credit for reporting it for this fix - Linus ]
The problem is, this driver tends to break very easily and nowadays,
nobody is expected to use FDRAWCMD anyway since it was used to
manipulate non-standard formats. The risk of breaking the driver is
higher than the risk presented by this race, and accessing the device
requires privileges anyway.
Let's just add a config option to completely disable this ioctl and
leave it disabled by default. Distros shouldn't use it, and only those
running on antique hardware might need to enable it.
Link: https://lore.kernel.org/all/000000000000b71cdd05d703f6bf@google.com/
Link: https://lore.kernel.org/lkml/CAKcFiNC=MfYVW-Jt9A3=FPJpTwCD2PL_ULNCpsCVE5s8ZeBQgQ@mail.gmail.com
Link: https://lore.kernel.org/all/CAEAjamu1FRhz6StCe_55XY5s389ZP_xmCF69k987En+1z53=eg@mail.gmail.com
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Reported-by: syzbot+8e8958586909d62b6840@syzkaller.appspotmail.com
Reported-by: cruise k <cruise4k@gmail.com>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Tested-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 286901941f ]
We want our pages not to change while they are being written.
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7198bfc201 upstream.
This reverts commit 6d35d04a9e.
Both Gabriel and Borislav report that this commit casues a regression
with nbd:
sysfs: cannot create duplicate filename '/dev/block/43:0'
Revert it before 5.18-rc1 and we'll investigage this separately in
due time.
Link: https://lore.kernel.org/all/YkiJTnFOt9bTv6A2@zn.tnic/
Reported-by: Gabriel L. Somlo <somlo@cmu.edu>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit aadb22ba2f ]
In get_initial_state, it calls notify_initial_state_done(skb,..) if
cb->args[5]==1. If genlmsg_put() failed in notify_initial_state_done(),
the skb will be freed by nlmsg_free(skb).
Then get_initial_state will goto out and the freed skb will be used by
return value skb->len, which is a uaf bug.
What's worse, the same problem goes even further: skb can also be
freed in the notify_*_state_change -> notify_*_state calls below.
Thus 4 additional uaf bugs happened.
My patch lets the problem callee functions: notify_initial_state_done
and notify_*_state_change return an error code if errors happen.
So that the error codes could be propagated and the uaf bugs can be avoid.
v2 reports a compilation warning. This v3 fixed this warning and built
successfully in my local environment with no additional warnings.
v2: https://lore.kernel.org/patchwork/patch/1435218/
Fixes: a29728463b ("drbd: Backport the "events2" command")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
