commit a71d0908e3 upstream.
The helper waiting for a listener port can match any socket whose
hexadecimal representation of source or destination addresses
matches that of the given port.
Additionally, any socket state is accepted.
All the above can let the helper return successfully before the
relevant listener is actually ready, with unexpected results.
So far I could not find any related failure in the netdev CI, but
the next patch is going to make the critical event more easily
reproducible.
Address the issue matching the port hex only vs the relevant socket
field and additionally checking the socket state for TCP sockets.
Fixes: 3bdd9fd29c ("selftests/net: synchronize udpgro tests' tx and rx connection")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/192b3dbc443d953be32991d1b0ca432bd4c65008.1707731086.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 40867d74c3 ]
The fundamental premise of VRF and l3mdev core code is binding a socket
to a device (l3mdev or netdev with an L3 domain) to indicate L3 scope.
Legacy code resets flowi_oif to the l3mdev losing any original port
device binding. Ben (among others) has demonstrated use cases where the
original port device binding is important and needs to be retained.
This patch handles that by adding a new entry to the common flow struct
that can indicate the l3mdev index for later rule and table matching
avoiding the need to reset flowi_oif.
In addition to allowing more use cases that require port device binds,
this patch brings a few datapath simplications:
1. l3mdev_fib_rule_match is only called when walking fib rules and
always after l3mdev_update_flow. That allows an optimization to bail
early for non-VRF type uses cases when flowi_l3mdev is not set. Also,
only that index needs to be checked for the FIB table id.
2. l3mdev_update_flow can be called with flowi_oif set to a l3mdev
(e.g., VRF) device. By resetting flowi_oif only for this case the
FLOWI_FLAG_SKIP_NH_OIF flag is not longer needed and can be removed,
removing several checks in the datapath. The flowi_iif path can be
simplified to only be called if the it is not loopback (loopback can
not be assigned to an L3 domain) and the l3mdev index is not already
set.
3. Avoid another device lookup in the output path when the fib lookup
returns a reject failure.
Note: 2 functional tests for local traffic with reject fib rules are
updated to reflect the new direct failure at FIB lookup time for ping
rather than the failure on packet path. The current code fails like this:
HINT: Fails since address on vrf device is out of device scope
COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1
ping: Warning: source address might be selected on device other than: eth1
PING 172.16.3.1 (172.16.3.1) from 172.16.3.1 eth1: 56(84) bytes of data.
--- 172.16.3.1 ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms
where the test now directly fails:
HINT: Fails since address on vrf device is out of device scope
COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1
ping: connect: No route to host
Signed-off-by: David Ahern <dsahern@kernel.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20220314204551.16369-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 05ef7055de ("netfilter: fib: check correct rtable in vrf setups")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2351e8c654 ]
Some distros have grub2 config files with the lines
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
which match the skip regex defined for grub2 in get_grub_index():
$skip = '^\s*menuentry';
These false positives cause the grub number to be higher than it
should be, and the wrong kernel can end up booting.
Grub documents the menuentry command with whitespace between it and the
title, so make the skip regex reflect this.
Link: https://lore.kernel.org/20240904175530.84175-1-daniel.m.jordan@oracle.com
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: John 'Warthog9' Hawley (Tenstorrent) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d851dd4da ]
setup_loopback.sh and net_helper.sh are meant to be sourced from other
scripts, not executed directly. Therefore, remove the executable bits from
those files' permissions.
This change is similar to commit 49078c1b80 ("selftests: forwarding:
Remove executable bits from lib.sh")
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Fixes: 3bdd9fd29c ("selftests/net: synchronize udpgro tests' tx and rx connection")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-4-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3bdd9fd29c ]
The sockets used by udpgso_bench_tx aren't always ready when
udpgso_bench_tx transmits packets. This issue is more prevalent in -rt
kernels, but can occur in both. Replace the hacky sleep calls with a
function that checks whether the ports in the namespace are ready for
use.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Lucas Karpinski <lkarpins@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 9d851dd4da ("selftests: net: Remove executable bits from library scripts")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdb525ca92 ]
In some conditions, background processes in udpgro don't have enough
time to set up the sockets. When foreground processes start, this
results in the test failing with "./udpgso_bench_tx: sendmsg: Connection
refused". For instance, this happens from time to time on a Qualcomm
SA8540P SoC running CentOS Stream 9.
To fix this, increase the time given to background processes to
complete the startup before foreground processes start.
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 9d851dd4da ("selftests: net: Remove executable bits from library scripts")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6e23fb8d3 ]
Running vdso_test_correctness on s390x (aka s390 64 bit) emits a warning:
Warning: failed to find clock_gettime64 in vDSO
This is caused by the "#elif defined (__s390__)" check in vdso_config.h
which the defines VDSO_32BIT.
If __s390x__ is defined also __s390__ is defined. Therefore the correct
check must make sure that only __s390__ is defined.
Therefore add the missing !defined(__s390x__). Also use common
__s390x__ define instead of __s390X__.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Fixes: 693f5ca08c ("kselftest: Extend vDSO selftest")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14be4e6f35 ]
The vDSO self tests fail on s390x for a vDSO linked with the GNU linker
ld as follows:
# ./vdso_test_gettimeofday
Floating point exception (core dumped)
On s390x the ELF hash table entries are 64 bits instead of 32 bits in
size (see Glibc sysdeps/unix/sysv/linux/s390/bits/elfclass.h).
Fixes: 40723419f4 ("kselftest: Enable vDSO test on non x86 platforms")
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c41a701d18 ]
Currently, running the charge_reserved_hugetlb.sh selftest we can
sometimes observe something like:
$ ./charge_reserved_hugetlb.sh -cgroup-v2
...
write_result is 0
After write:
hugetlb_usage=0
reserved_usage=10485760
killing write_to_hugetlbfs
Received 2.
Deleting the memory
Detach failure: Invalid argument
umount: /mnt/huge: target is busy.
Both cases are issues in the test.
While the unmount error seems to be racy, it will make the test fail:
$ ./run_vmtests.sh -t hugetlb
...
# [FAIL]
not ok 10 charge_reserved_hugetlb.sh -cgroup-v2 # exit=32
The issue is that we are not waiting for the write_to_hugetlbfs process to
quit. So it might still have a hugetlbfs file open, about which umount is
not happy. Fix that by making "killall" wait for the process to quit.
The other error ("Detach failure: Invalid argument") does not seem to
result in a test error, but is misleading. Turns out write_to_hugetlbfs.c
unconditionally tries to cleanup using shmdt(), even when we only
mmap()'ed a hugetlb file. Even worse, shmaddr is never even set for the
SHM case. Fix that as well.
With this change it seems to work as expected.
Link: https://lkml.kernel.org/r/20240821123115.2068812-1-david@redhat.com
Fixes: 29750f71a9 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d297c419b ]
Running vdso_test_correctness on powerpc64 gives the following warning:
~ # ./vdso_test_correctness
Warning: failed to find clock_gettime64 in vDSO
This is because vdso_test_correctness was built with VDSO_32BIT defined.
__powerpc__ macro is defined on both powerpc32 and powerpc64 so
__powerpc64__ needs to be checked first in vdso_config.h
Fixes: 693f5ca08c ("kselftest: Extend vDSO selftest")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59eb856c3e ]
Following error occurs when running vdso_test_correctness on powerpc:
~ # ./vdso_test_correctness
[WARN] failed to find vDSO
[SKIP] No vDSO, so skipping clock_gettime() tests
[SKIP] No vDSO, so skipping clock_gettime64() tests
[RUN] Testing getcpu...
[OK] CPU 0: syscall: cpu 0, node 0
On powerpc, vDSO is neither called linux-vdso.so.1 nor linux-gate.so.1
but linux-vdso32.so.1 or linux-vdso64.so.1.
Also search those two names before giving up.
Fixes: c7e5789b24 ("kselftest: Move test_vdso to the vDSO test suite")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c66be905cd ]
step_after_suspend_test fails with device busy error while
writing to /sys/power/state to start suspend. The test believes
it failed to enter suspend state with
$ sudo ./step_after_suspend_test
TAP version 13
Bail out! Failed to enter Suspend state
However, in the kernel message, I indeed see the system get
suspended and then wake up later.
[611172.033108] PM: suspend entry (s2idle)
[611172.044940] Filesystems sync: 0.006 seconds
[611172.052254] Freezing user space processes
[611172.059319] Freezing user space processes completed (elapsed 0.001 seconds)
[611172.067920] OOM killer disabled.
[611172.072465] Freezing remaining freezable tasks
[611172.080332] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[611172.089724] printk: Suspending console(s) (use no_console_suspend to debug)
[611172.117126] serial 00:03: disabled
some other hardware get reconnected
[611203.136277] OOM killer enabled.
[611203.140637] Restarting tasks ...
[611203.141135] usb 1-8.1: USB disconnect, device number 7
[611203.141755] done.
[611203.155268] random: crng reseeded on system resumption
[611203.162059] PM: suspend exit
After investigation, I noticed that for the code block
if (write(power_state_fd, "mem", strlen("mem")) != strlen("mem"))
ksft_exit_fail_msg("Failed to enter Suspend state\n");
The write will return -1 and errno is set to 16 (device busy).
It should be caused by the write function is not successfully returned
before the system suspend and the return value get messed when waking up.
As a result, It may be better to check the time passed of those few
instructions to determine whether the suspend is executed correctly for
it is pretty hard to execute those few lines for 5 seconds.
The timer to wake up the system is set to expire after 5 seconds and
no re-arm. If the timer remaining time is 0 second and 0 nano secomd,
it means the timer expired and wake the system up. Otherwise, the system
could be considered to enter the suspend state failed if there is any
remaining time.
After appling this patch, the test would not fail for it believes the
system does not go to suspend by mistake. It now could continue to the
rest part of the test after suspend.
Fixes: bfd092b8c2 ("selftests: breakpoint: add step_after_suspend_test")
Reported-by: Sinadin Shan <sinadin.shan@oracle.com>
Signed-off-by: Yifei Liu <yifei.l.liu@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa95073fd2 ]
While building, bpftool makes a skeleton from test_core_extern.c, which
itself includes <stdbool.h> and uses the 'bool' type. However, the skeleton
test_core_extern.skel.h generated *does not* include <stdbool.h> or use the
'bool' type, instead using the C-only '_Bool' type. Compiling test_cpp.cpp
with g++ 12.3 for mips64el/musl-libc then fails with error:
In file included from test_cpp.cpp:9:
test_core_extern.skel.h:45:17: error: '_Bool' does not name a type
45 | _Bool CONFIG_BOOL;
| ^~~~~
This was likely missed previously because glibc uses a GNU extension for
<stdbool.h> with C++ (#define _Bool bool), not supported by musl libc.
Normally, a C fragment would include <stdbool.h> and use the 'bool' type,
and thus cleanly work after import by C++. The ideal fix would be for
'bpftool gen skeleton' to output the correct type/include supporting C++,
but in the meantime add a conditional define as above.
Fixes: 7c8dce4b16 ("bpftool: Make skeleton C code compilable with C++ compiler")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/6fc1dd28b8bda49e51e4f610bdc9d22f4455632d.1722244708.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cacf2a5a78 ]
Although the post-increment in macro 'CPU_SET(next++, &cpuset)' seems safe,
the sequencing can raise compile errors, so move the increment outside the
macro. This avoids an error seen using gcc 12.3.0 for mips64el/musl-libc:
In file included from test_lru_map.c:11:
test_lru_map.c: In function 'sched_next_online':
test_lru_map.c:129:29: error: operation on 'next' may be undefined [-Werror=sequence-point]
129 | CPU_SET(next++, &cpuset);
| ^
cc1: all warnings being treated as errors
Fixes: 3fbfadce60 ("bpf: Fix test_lru_sanity5() in test_lru_map.c")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/22993dfb11ccf27925a626b32672fd3324cb76c4.1722244708.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 730561d3c0 ]
Remove a redundant include of '<asm/types.h>', whose needed definitions are
already included (via '<linux/types.h>') in cg_storage_multi_egress_only.c,
cg_storage_multi_isolated.c, and cg_storage_multi_shared.c. This avoids
redefinition errors seen compiling for mips64el/musl-libc like:
In file included from progs/cg_storage_multi_egress_only.c:13:
In file included from progs/cg_storage_multi.h:6:
In file included from /usr/mips64el-linux-gnuabi64/include/asm/types.h:23:
/usr/include/asm-generic/int-l64.h:29:25: error: typedef redefinition with different types ('long' vs 'long long')
29 | typedef __signed__ long __s64;
| ^
/usr/include/asm-generic/int-ll64.h:30:44: note: previous definition is here
30 | __extension__ typedef __signed__ long long __s64;
| ^
Fixes: 9e5bd1f763 ("selftests/bpf: Test CGROUP_STORAGE map can't be used by multiple progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/4f4702e9f6115b7f84fea01b2326ca24c6df7ba8.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit debfa4f628 ]
The type 'loff_t' is a GNU extension and not exposed by the musl 'fcntl.h'
header unless _GNU_SOURCE is defined. Add this definition to fix errors
seen compiling for mips64el/musl-libc:
In file included from tools/testing/selftests/bpf/prog_tests/core_reloc.c:4:
./bpf_testmod/bpf_testmod.h:10:9: error: unknown type name 'loff_t'
10 | loff_t off;
| ^~~~~~
./bpf_testmod/bpf_testmod.h:16:9: error: unknown type name 'loff_t'
16 | loff_t off;
| ^~~~~~
Fixes: 6bcd39d366 ("selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/11c3af75a7eb6bcb7ad9acfae6a6f470c572eb82.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18826fb0b7 ]
The GNU version of 'struct tcp_info' in 'netinet/tcp.h' is not exposed by
musl headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
tcp_rtt.c: In function 'wait_for_ack':
tcp_rtt.c:24:25: error: storage size of 'info' isn't known
24 | struct tcp_info info;
| ^~~~
tcp_rtt.c:24:25: error: unused variable 'info' [-Werror=unused-variable]
cc1: all warnings being treated as errors
Fixes: 1f4f80fed2 ("selftests/bpf: test_progs: convert test_tcp_rtt")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/f2329767b15df206f08a5776d35a47c37da855ae.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e4c43bcb8 ]
The GNU version of 'struct tcphdr' has members 'doff', 'source' and 'dest',
which are not exposed by musl libc headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
flow_dissector.c:118:30: error: 'struct tcphdr' has no member named 'doff'
118 | .tcp.doff = 5,
| ^~~~
flow_dissector.c:119:30: error: 'struct tcphdr' has no member named 'source'
119 | .tcp.source = 80,
| ^~~~~~
flow_dissector.c:120:30: error: 'struct tcphdr' has no member named 'dest'
120 | .tcp.dest = 8080,
| ^~~~
Fixes: ae173a9157 ("selftests/bpf: support BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8f7ab21a73f678f9cebd32b26c444a686e57414d.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bae9a5ce7d ]
The GNU version of 'struct tcphdr' with member 'doff' is not exposed by
musl headers unless _GNU_SOURCE is defined. Add this definition to fix
errors seen compiling for mips64el/musl-libc:
In file included from kfree_skb.c:2:
kfree_skb.c: In function 'on_sample':
kfree_skb.c:45:30: error: 'struct tcphdr' has no member named 'doff'
45 | if (CHECK(pkt_v6->tcp.doff != 5, "check_tcp",
| ^
Fixes: 580d656d80 ("selftests/bpf: Add kfree_skb raw_tp test")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/e2d8cedc790959c10d6822a51f01a7a3616bea1b.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d44c93fc2f ]
Add a "bpf_util.h" include to avoid the following error seen compiling for
mips64el with musl libc:
bench.c: In function 'find_benchmark':
bench.c:590:25: error: implicit declaration of function 'ARRAY_SIZE' [-Werror=implicit-function-declaration]
590 | for (i = 0; i < ARRAY_SIZE(benchs); i++) {
| ^~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: 8e7c2a023a ("selftests/bpf: Add benchmark runner infrastructure")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/bc4dde77dfcd17a825d8f28f72f3292341966810.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b10f0c227 ]
Existing code calls getsockname() with a 'struct sockaddr_in6 *' argument
where a 'struct sockaddr *' argument is declared, yielding compile errors
when building for mips64el/musl-libc:
bpf_iter_setsockopt.c: In function 'get_local_port':
bpf_iter_setsockopt.c:98:30: error: passing argument 2 of 'getsockname' from incompatible pointer type [-Werror=incompatible-pointer-types]
98 | if (!getsockname(fd, &addr, &addrlen))
| ^~~~~
| |
| struct sockaddr_in6 *
In file included from .../netinet/in.h:10,
from .../arpa/inet.h:9,
from ./test_progs.h:17,
from bpf_iter_setsockopt.c:5:
.../sys/socket.h:391:23: note: expected 'struct sockaddr * restrict' but argument is of type 'struct sockaddr_in6 *'
391 | int getsockname (int, struct sockaddr *__restrict, socklen_t *__restrict);
| ^
cc1: all warnings being treated as errors
This compiled under glibc only because the argument is declared to be a
"funky" transparent union which includes both types above. Explicitly cast
the argument to allow compiling for both musl and glibc.
Fixes: eed92afdd1 ("bpf: selftest: Test batching and bpf_(get|set)sockopt in bpf tcp iter")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Geliang Tang <geliang@kernel.org>
Link: https://lore.kernel.org/bpf/f41def0f17b27a23b1709080e4e3f37f4cc11ca9.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d393f9479d ]
Cast 'rlim_t' argument to match expected type of printf() format and avoid
compile errors seen building for mips64el/musl-libc:
In file included from map_tests/sk_storage_map.c:20:
map_tests/sk_storage_map.c: In function 'test_sk_storage_map_stress_free':
map_tests/sk_storage_map.c:414:56: error: format '%lu' expects argument of type 'long unsigned int', but argument 2 has type 'rlim_t' {aka 'long long unsigned int'} [-Werror=format=]
414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d",
| ^~~~~~~~~~~~~~~~~~~~~~~
415 | rlim_new.rlim_cur, errno);
| ~~~~~~~~~~~~~~~~~
| |
| rlim_t {aka long long unsigned int}
./test_maps.h:12:24: note: in definition of macro 'CHECK'
12 | printf(format); \
| ^~~~~~
map_tests/sk_storage_map.c:414:68: note: format string is defined here
414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d",
| ~~^
| |
| long unsigned int
| %llu
cc1: all warnings being treated as errors
Fixes: 51a0e301a5 ("bpf: Add BPF_MAP_TYPE_SK_STORAGE test to test_maps")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1e00a1fa7acf91b4ca135c4102dc796d518bad86.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b0ad43177 ]
Function ignores the AF_UNIX socket type argument, SOCK_DGRAM is hardcoded.
Fix to respect the argument provided.
Fixes: 75e0e27db6 ("selftest/bpf: Change udp to inet in some function names")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20240713200218.2140950-3-mhal@rbox.co
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1382e3b6a3 ]
The commit fc8b2a6194
("net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation")
adds check of potential number of UDP segments vs
UDP_MAX_SEGMENTS in linux/virtio_net.h.
After this change certification test of USO guest-to-guest
transmit on Windows driver for virtio-net device fails,
for example with packet size of ~64K and mss of 536 bytes.
In general the USO should not be more restrictive than TSO.
Indeed, in case of unreasonably small mss a lot of segments
can cause queue overflow and packet loss on the destination.
Limit of 128 segments is good for any practical purpose,
with minimal meaningful mss of 536 the maximal UDP packet will
be divided to ~120 segments.
The number of segments for UDP packets is validated vs
UDP_MAX_SEGMENTS also in udp.c (v4,v6), this does not affect
quest-to-guest path but does affect packets sent to host, for
example.
It is important to mention that UDP_MAX_SEGMENTS is kernel-only
define and not available to user mode socket applications.
In order to request MSS smaller than MTU the applications
just uses setsockopt with SOL_UDP and UDP_SEGMENT and there is
no limitations on socket API level.
Fixes: fc8b2a6194 ("net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation")
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[5.15-stable: fix conflict with neighboring but unrelated code from
e2a4392b61 ("udp: introduce udp->udp_flags")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 291e4baf70 ]
Even if a vgem device is configured in, we will skip the import_vgem_fd()
test almost every time.
TAP version 13
1..11
# Testing heap: system
# =======================================
# Testing allocation and importing:
ok 1 # SKIP Could not open vgem -1
The problem is that we use the DRM_IOCTL_VERSION ioctl to query the driver
version information but leave the name field a non-null-terminated string.
Terminate it properly to actually test against the vgem device.
While at it, let's check the length of the driver name is exactly 4 bytes
and return early otherwise (in case there is a name like "vgemfoo" that
gets converted to "vgem\0" unexpectedly).
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729024604.2046-1-yuzenghui@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0c9fe5eec ]
Since commit 255c1c7279 ("tc-testing: Allow test cases to be skipped")
the variable test_ordinal doesn't exist in call_pre_case().
So it should not be accessed when an exception occurs.
This resolves the following splat:
...
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File ".../tdc.py", line 1028, in <module>
main()
File ".../tdc.py", line 1022, in main
set_operation_mode(pm, parser, args, remaining)
File ".../tdc.py", line 966, in set_operation_mode
catresults = test_runner_serial(pm, args, alltests)
File ".../tdc.py", line 642, in test_runner_serial
(index, tsr) = test_runner(pm, args, alltests)
File ".../tdc.py", line 536, in test_runner
res = run_one_test(pm, args, index, tidx)
File ".../tdc.py", line 419, in run_one_test
pm.call_pre_case(tidx)
File ".../tdc.py", line 146, in call_pre_case
print('test_ordinal is {}'.format(test_ordinal))
NameError: name 'test_ordinal' is not defined
Fixes: 255c1c7279 ("tc-testing: Allow test cases to be skipped")
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20240815-tdc-test-ordinal-v1-1-0255c122a427@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9a2fa14720 upstream.
copy_fd_bitmaps(new, old, count) is expected to copy the first
count/BITS_PER_LONG bits from old->full_fds_bits[] and fill
the rest with zeroes. What it does is copying enough words
(BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest.
That works fine, *if* all bits past the cutoff point are
clear. Otherwise we are risking garbage from the last word
we'd copied.
For most of the callers that is true - expand_fdtable() has
count equal to old->max_fds, so there's no open descriptors
past count, let alone fully occupied words in ->open_fds[],
which is what bits in ->full_fds_bits[] correspond to.
The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds),
which is the smallest multiple of BITS_PER_LONG that covers all
opened descriptors below max_fds. In the common case (copying on
fork()) max_fds is ~0U, so all opened descriptors will be below
it and we are fine, by the same reasons why the call in expand_fdtable()
is safe.
Unfortunately, there is a case where max_fds is less than that
and where we might, indeed, end up with junk in ->full_fds_bits[] -
close_range(from, to, CLOSE_RANGE_UNSHARE) with
* descriptor table being currently shared
* 'to' being above the current capacity of descriptor table
* 'from' being just under some chunk of opened descriptors.
In that case we end up with observably wrong behaviour - e.g. spawn
a child with CLONE_FILES, get all descriptors in range 0..127 open,
then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending
up with descriptor #128, despite #64 being observably not open.
The minimally invasive fix would be to deal with that in dup_fd().
If this proves to add measurable overhead, we can go that way, but
let's try to fix copy_fd_bitmaps() first.
* new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size).
* make copy_fd_bitmaps() take the bitmap size in words, rather than
bits; it's 'count' argument is always a multiple of BITS_PER_LONG,
so we are not losing any information, and that way we can use the
same helper for all three bitmaps - compiler will see that count
is a multiple of BITS_PER_LONG for the large ones, so it'll generate
plain memcpy()+memset().
Reproducer added to tools/testing/selftests/core/close_range_test.c
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f833470c27 upstream.
Before the previous commit, 'signal' endpoints with the 'backup' flag
were ignored when sending the MP_JOIN.
The MPTCP Join selftest has then been modified to validate this case:
the "single address, backup" test, is now validating the MP_JOIN with a
backup flag as it is what we expect it to do with such name. The
previous version has been kept, but renamed to "single address, switch
to backup" to avoid confusions.
The "single address with port, backup" test is also now validating the
MPJ with a backup flag, which makes more sense than checking the switch
to backup with an MP_PRIO.
The "mpc backup both sides" test is now validating that the backup flag
is also set in MP_JOIN from and to the addresses used in the initial
subflow, using the special ID 0.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 4596a2c1b7 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ Conflicts in mptcp_join.sh because 'run_tests' helper has been
modified in multiple commits that are not in this version, e.g. commit
e571fb09c8 ("selftests: mptcp: add speed env var") and commit
ae7bd9ccec ("selftests: mptcp: join: option to execute specific
tests"). Adaptations have been made to use the old way, similar to
what is done around.
Also in this version, there is no "single address with port, backup"
subtest. Same for "mpc backup both sides". ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 935ff5bb8a upstream.
A peer can notify the other one that a subflow has to be treated as
"backup" by two different ways: either by sending a dedicated MP_PRIO
notification, or by setting the backup flag in the MP_JOIN handshake.
The selftests were previously monitoring the former, but not the latter.
This is what is now done here by looking at these new MIB counters when
validating the 'backup' cases:
MPTcpExtMPJoinSynBackupRx
MPTcpExtMPJoinSynAckBackupRx
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it will help to validate a new fix for an issue introduced by this
commit ID.
Fixes: 4596a2c1b7 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ Conflicts in mptcp_join.sh because the check are done has changed,
e.g. in commit 03668c65d1 ("selftests: mptcp: join: rework detailed
report"), or commit 985de45923 ("selftests: mptcp: centralize stats
dumping"), etc. Adaptations have been made to use the old way, similar
to what is done just above.
Also, in this version, some subtests are missing. Only the two using
chk_prio_nr() have been modified. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2ed08e4bc5 ]
On a 8-socket server the TSC is wrongly marked as 'unstable' and disabled
during boot time on about one out of 120 boot attempts:
clocksource: timekeeping watchdog on CPU227: wd-tsc-wd excessive read-back delay of 153560ns vs. limit of 125000ns,
wd-wd read-back delay only 11440ns, attempt 3, marking tsc unstable
tsc: Marking TSC unstable due to clocksource watchdog
TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
sched_clock: Marking unstable (119294969739, 159204297)<-(125446229205, -5992055152)
clocksource: Checking clocksource tsc synchronization from CPU 319 to CPUs 0,99,136,180,210,542,601,896.
clocksource: Switched to clocksource hpet
The reason is that for platform with a large number of CPUs, there are
sporadic big or huge read latencies while reading the watchog/clocksource
during boot or when system is under stress work load, and the frequency and
maximum value of the latency goes up with the number of online CPUs.
The cCurrent code already has logic to detect and filter such high latency
case by reading the watchdog twice and checking the two deltas. Due to the
randomness of the latency, there is a low probabilty that the first delta
(latency) is big, but the second delta is small and looks valid. The
watchdog code retries the readouts by default twice, which is not
necessarily sufficient for systems with a large number of CPUs.
There is a command line parameter 'max_cswd_read_retries' which allows to
increase the number of retries, but that's not user friendly as it needs to
be tweaked per system. As the number of required retries is proportional to
the number of online CPUs, this parameter can be calculated at runtime.
Scale and enlarge the number of retries according to the number of online
CPUs and remove the command line parameter completely.
[ tglx: Massaged change log and comments ]
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jin Wang <jin1.wang@intel.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240221060859.1027450-1-feng.tang@intel.com
Stable-dep-of: f2655ac2c0 ("clocksource: Fix brown-bag boolean thinko in cs_watchdog_read()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 189f1a976e ]
For all these years libbpf's BTF dumper has been emitting not strictly
valid syntax for function prototypes that have no input arguments.
Instead of `int (*blah)()` we should emit `int (*blah)(void)`.
This is not normally a problem, but it manifests when we get kfuncs in
vmlinux.h that have no input arguments. Due to compiler internal
specifics, we get no BTF information for such kfuncs, if they are not
declared with proper `(void)`.
The fix is trivial. We also need to adjust a few ancient tests that
happily assumed `()` is correct.
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20240712224442.282823-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 17c743b9da upstream.
Building the sigaltstack test with GCC on 64-bit powerpc errors with:
gcc -Wall sas.c -o /home/michael/linux/.build/kselftest/sigaltstack/sas
In file included from sas.c:23:
current_stack_pointer.h:22:2: error: #error "implement current_stack_pointer equivalent"
22 | #error "implement current_stack_pointer equivalent"
| ^~~~~
sas.c: In function ‘my_usr1’:
sas.c:50:13: error: ‘sp’ undeclared (first use in this function); did you mean ‘p’?
50 | if (sp < (unsigned long)sstack ||
| ^~
This happens because GCC doesn't define __ppc__ for 64-bit builds, only
32-bit builds. Instead use __powerpc__ to detect powerpc builds, which
is defined by clang and GCC for 64-bit and 32-bit builds.
Fixes: 05107edc91 ("selftests: sigaltstack: fix -Wuninitialized")
Cc: stable@vger.kernel.org # v6.3+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240520062647.688667-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f67a90a0c8 ]
Lately, an additional locking was added by commit c0a40097f0
("drivers: core: synchronize really_probe() and dev_uevent()"). The
locking protects dev_uevent() calling. This function is used to send
messages from the kernel to user space. Uevent messages notify user space
about changes in device states, such as when a device is added, removed,
or changed. These messages are used by udev (or other similar user-space
tools) to apply device-specific rules.
After reloading devlink instance, udev events should be processed. This
locking causes a short delay of udev events handling.
One example for useful udev rule is renaming ports. 'forwading.config'
can be configured to use names after udev rules are applied. Some tests run
devlink_reload() and immediately use the updated names. This worked before
the above mentioned commit was pushed, but now the delay of uevent messages
causes that devlink_reload() returns before udev events are handled and
tests fail.
Adjust devlink_reload() to not assume that udev events are already
processed when devlink reload is done, instead, wait for udev events to
ensure they are processed before returning from the function.
Without this patch:
TESTS='rif_mac_profile' ./resource_scale.sh
TEST: 'rif_mac_profile' 4 [ OK ]
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory
Cannot find device "swp1"
Cannot find device "swp2"
TEST: setup_wait_dev (: Interface swp1 does not come up.) [FAIL]
With this patch:
$ TESTS='rif_mac_profile' ./resource_scale.sh
TEST: 'rif_mac_profile' 4 [ OK ]
TEST: 'rif_mac_profile' overflow 5 [ OK ]
This is relevant not only for this test.
Fixes: bc7cbb1e9f ("selftests: forwarding: Add devlink_lib.sh")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/89367666e04b38a8993027f1526801ca327ab96a.1720709333.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adae187ebe ]
In the error path when update_lookup_map() fails in drop_on_reuseport in
prog_tests/sk_lookup.c, "server1", the fd of server 1, should be closed.
This patch fixes this by using "goto close_srv1" lable instead of "detach"
to close "server1" in this case.
Fixes: 0ab5539f85 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point")
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/86aed33b4b0ea3f04497c757845cff7e8e621a2d.1720515893.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75d8d7a630 ]
ACLs that reside in the algorithmic TCAM (A-TCAM) in Spectrum-2 and
newer ASICs can share the same mask if their masks only differ in up to
8 consecutive bits. For example, consider the following filters:
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 192.0.2.0/24 action drop
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 198.51.100.128/25 action drop
The second filter can use the same mask as the first (dst_ip/24) with a
delta of 1 bit.
However, the above only works because the two filters have different
values in the common unmasked part (dst_ip/24). When entries have the
same value in the common unmasked part they create undesired collisions
in the device since many entries now have the same key. This leads to
firmware errors such as [1] and to a reduced scale.
Fix by adjusting the hash table key to only include the value in the
common unmasked part. That is, without including the delta bits. That
way the driver will detect the collision during filter insertion and
spill the filter into the circuit TCAM (C-TCAM).
Add a test case that fails without the fix and adjust existing cases
that check C-TCAM spillage according to the above limitation.
[1]
mlxsw_spectrum2 0000:06:00.0: EMAD reg access failed (tid=3379b18a00003394,reg_id=3027(ptce3),type=write,status=8(resource not available))
Fixes: c22291f7cf ("mlxsw: spectrum: acl: Implement delta for ERP")
Reported-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de1b5ea789 ]
The value of recv in msg_loop may be negative, like EWOULDBLOCK, so it's
necessary to check if it is positive before accumulating it to bytes_recvd.
Fixes: 16962b2404 ("bpf: sockmap, add selftests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/5172563f7c7b2a2e953cef02e89fc34664a7b190.1716446893.git.tanggeliang@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c8d7598df ]
bpf_prog5 and bpf_prog7 are removed from progs/test_sockmap_kern.h in
commit d79a32129b ("bpf: Selftests, remove prints from sockmap tests"),
now there are only 9 progs in it, not 11:
SEC("sk_skb1")
int bpf_prog1(struct __sk_buff *skb)
SEC("sk_skb2")
int bpf_prog2(struct __sk_buff *skb)
SEC("sk_skb3")
int bpf_prog3(struct __sk_buff *skb)
SEC("sockops")
int bpf_sockmap(struct bpf_sock_ops *skops)
SEC("sk_msg1")
int bpf_prog4(struct sk_msg_md *msg)
SEC("sk_msg2")
int bpf_prog6(struct sk_msg_md *msg)
SEC("sk_msg3")
int bpf_prog8(struct sk_msg_md *msg)
SEC("sk_msg4")
int bpf_prog9(struct sk_msg_md *msg)
SEC("sk_msg5")
int bpf_prog10(struct sk_msg_md *msg)
This patch updates the array sizes of prog_fd[], prog_attach_type[] and
prog_type[] from 11 to 9 accordingly.
Fixes: d79a32129b ("bpf: Selftests, remove prints from sockmap tests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/9c10d9f974f07fcb354a43a8eca67acb2fafc587.1715926605.git.tanggeliang@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73810cd45b ]
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...there are several warnings, and an error. This fixes all of those and
allows these tests to run and pass.
1. Fix linker error (undefined reference to memcpy) by providing a local
version of memcpy.
2. clang complains about using this form:
if (g = h & 0xf0000000)
...so factor out the assignment into a separate step.
3. The code is passing a signed const char* to elf_hash(), which expects
a const unsigned char *. There are several callers, so fix this at
the source by allowing the function to accept a signed argument, and
then converting to unsigned operations, once inside the function.
4. clang doesn't have __attribute__((externally_visible)) and generates
a warning to that effect. Fortunately, gcc 12 and gcc 13 do not seem
to require that attribute in order to build, run and pass tests here,
so remove it.
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84b6df4c49 ]
Fix warnings like:
openat2_test.c: In function ‘test_openat2_flags’:
openat2_test.c:303:73: warning: format ‘%llX’ expects argument of type
‘long long unsigned int’, but argument 5 has type ‘__u64’ {aka ‘long
unsigned int’} [-Wformat=]
By switching to unsigned long long for u64 for ppc64 builds.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6715df8d5d upstream.
This commits updates the following functions to allow reads from
uninitialized stack locations when env->allow_uninit_stack option is
enabled:
- check_stack_read_fixed_off()
- check_stack_range_initialized(), called from:
- check_stack_read_var_off()
- check_helper_mem_access()
Such change allows to relax logic in stacksafe() to treat STACK_MISC
and STACK_INVALID in a same way and make the following stack slot
configurations equivalent:
| Cached state | Current state |
| stack slot | stack slot |
|------------------+------------------|
| STACK_INVALID or | STACK_INVALID or |
| STACK_MISC | STACK_SPILL or |
| | STACK_MISC or |
| | STACK_ZERO or |
| | STACK_DYNPTR |
This leads to significant verification speed gains (see below).
The idea was suggested by Andrii Nakryiko [1] and initial patch was
created by Alexei Starovoitov [2].
Currently the env->allow_uninit_stack is allowed for programs loaded
by users with CAP_PERFMON or CAP_SYS_ADMIN capabilities.
A number of test cases from verifier/*.c were expecting uninitialized
stack access to be an error. These test cases were updated to execute
in unprivileged mode (thus preserving the tests).
The test progs/test_global_func10.c expected "invalid indirect read
from stack" error message because of the access to uninitialized
memory region. This error is no longer possible in privileged mode.
The test is updated to provoke an error "invalid indirect access to
stack" because of access to invalid stack address (such error is not
verified by progs/test_global_func*.c series of tests).
The following tests had to be removed because these can't be made
unprivileged:
- verifier/sock.c:
- "sk_storage_get(map, skb->sk, &stack_value, 1): partially init
stack_value"
BPF_PROG_TYPE_SCHED_CLS programs are not executed in unprivileged mode.
- verifier/var_off.c:
- "indirect variable-offset stack access, max_off+size > max_initialized"
- "indirect variable-offset stack access, uninitialized"
These tests verify that access to uninitialized stack values is
detected when stack offset is not a constant. However, variable
stack access is prohibited in unprivileged mode, thus these tests
are no longer valid.
* * *
Here is veristat log comparing this patch with current master on a
set of selftest binaries listed in tools/testing/selftests/bpf/veristat.cfg
and cilium BPF binaries (see [3]):
$ ./veristat -e file,prog,states -C -f 'states_pct<-30' master.log current.log
File Program States (A) States (B) States (DIFF)
-------------------------- -------------------------- ---------- ---------- ----------------
bpf_host.o tail_handle_ipv6_from_host 349 244 -105 (-30.09%)
bpf_host.o tail_handle_nat_fwd_ipv4 1320 895 -425 (-32.20%)
bpf_lxc.o tail_handle_nat_fwd_ipv4 1320 895 -425 (-32.20%)
bpf_sock.o cil_sock4_connect 70 48 -22 (-31.43%)
bpf_sock.o cil_sock4_sendmsg 68 46 -22 (-32.35%)
bpf_xdp.o tail_handle_nat_fwd_ipv4 1554 803 -751 (-48.33%)
bpf_xdp.o tail_lb_ipv4 6457 2473 -3984 (-61.70%)
bpf_xdp.o tail_lb_ipv6 7249 3908 -3341 (-46.09%)
pyperf600_bpf_loop.bpf.o on_event 287 145 -142 (-49.48%)
strobemeta.bpf.o on_event 15915 4772 -11143 (-70.02%)
strobemeta_nounroll2.bpf.o on_event 17087 3820 -13267 (-77.64%)
xdp_synproxy_kern.bpf.o syncookie_tc 21271 6635 -14636 (-68.81%)
xdp_synproxy_kern.bpf.o syncookie_xdp 23122 6024 -17098 (-73.95%)
-------------------------- -------------------------- ---------- ---------- ----------------
Note: I limited selection by states_pct<-30%.
Inspection of differences in pyperf600_bpf_loop behavior shows that
the following patch for the test removes almost all differences:
- a/tools/testing/selftests/bpf/progs/pyperf.h
+ b/tools/testing/selftests/bpf/progs/pyperf.h
@ -266,8 +266,8 @ int __on_event(struct bpf_raw_tracepoint_args *ctx)
}
if (event->pthread_match || !pidData->use_tls) {
- void* frame_ptr;
- FrameData frame;
+ void* frame_ptr = 0;
+ FrameData frame = {};
Symbol sym = {};
int cur_cpu = bpf_get_smp_processor_id();
W/o this patch the difference comes from the following pattern
(for different variables):
static bool get_frame_data(... FrameData *frame ...)
{
...
bpf_probe_read_user(&frame->f_code, ...);
if (!frame->f_code)
return false;
...
bpf_probe_read_user(&frame->co_name, ...);
if (frame->co_name)
...;
}
int __on_event(struct bpf_raw_tracepoint_args *ctx)
{
FrameData frame;
...
get_frame_data(... &frame ...) // indirectly via a bpf_loop & callback
...
}
SEC("raw_tracepoint/kfree_skb")
int on_event(struct bpf_raw_tracepoint_args* ctx)
{
...
ret |= __on_event(ctx);
ret |= __on_event(ctx);
...
}
With regards to value `frame->co_name` the following is important:
- Because of the conditional `if (!frame->f_code)` each call to
__on_event() produces two states, one with `frame->co_name` marked
as STACK_MISC, another with it as is (and marked STACK_INVALID on a
first call).
- The call to bpf_probe_read_user() does not mark stack slots
corresponding to `&frame->co_name` as REG_LIVE_WRITTEN but it marks
these slots as BPF_MISC, this happens because of the following loop
in the check_helper_call():
for (i = 0; i < meta.access_size; i++) {
err = check_mem_access(env, insn_idx, meta.regno, i, BPF_B,
BPF_WRITE, -1, false);
if (err)
return err;
}
Note the size of the write, it is a one byte write for each byte
touched by a helper. The BPF_B write does not lead to write marks
for the target stack slot.
- Which means that w/o this patch when second __on_event() call is
verified `if (frame->co_name)` will propagate read marks first to a
stack slot with STACK_MISC marks and second to a stack slot with
STACK_INVALID marks and these states would be considered different.
[1] https://lore.kernel.org/bpf/CAEf4BzY3e+ZuC6HUa8dCiUovQRg2SzEk7M-dSkqNZyn=xEmnPA@mail.gmail.com/
[2] https://lore.kernel.org/bpf/CAADnVQKs2i1iuZ5SUGuJtxWVfGYR9kDgYKhq3rNV+kBLQCu7rA@mail.gmail.com/
[3] git@github.com:anakryiko/cilium.git
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Co-developed-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230219200427.606541-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7d6d8f0c8b ]
We find that when lock debugging is on, notifications may not come in
order. Thus, we have order checking outputs managed by cfg_verbose, to
avoid too many outputs in this case.
Fixes: 07b65c5b31 ("test: add msg_zerocopy test")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Xiaochun Lu <xiaochun.lu@bytedance.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240701225349.3395580-3-zijianzhang@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af2b7e5b74 ]
In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg
on a socket with MSG_ZEROCOPY flag, and it will recv the notifications
until the socket is not writable. Typically, it will start the receiving
process after around 30+ sendmsgs. However, as the introduction of commit
dfa2f04833 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is
always writable and does not get any chance to run recv notifications.
The selftest always exits with OUT_OF_MEMORY because the memory used by
opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a
different value to trigger OOM on older kernels too.
Thus, we introduce "cfg_notification_limit" to force sender to receive
notifications after some number of sendmsgs.
Fixes: 07b65c5b31 ("test: add msg_zerocopy test")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Xiaochun Lu <xiaochun.lu@bytedance.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240701225349.3395580-2-zijianzhang@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80164282b3 ]
There is a 'malloc' call, which can be unsuccessful.
This patch will add the malloc failure checking
to avoid possible null dereference and give more information
about test fail reasons.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240423082102.2018886-1-chentao@kylinos.cn
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14bb1e8c8d ]
Recently, I frequently hit the following test failure:
[root@arch-fb-vm1 bpf]# ./test_progs -n 33/1
test_lookup_update:PASS:skel_open 0 nsec
[...]
test_lookup_update:PASS:sync_rcu 0 nsec
test_lookup_update:FAIL:map1_leak inner_map1 leaked!
#33/1 btf_map_in_map/lookup_update:FAIL
#33 btf_map_in_map:FAIL
In the test, after map is closed and then after two rcu grace periods,
it is assumed that map_id is not available to user space.
But the above assumption cannot be guaranteed. After zero or one
or two rcu grace periods in different siturations, the actual
freeing-map-work is put into a workqueue. Later on, when the work
is dequeued, the map will be actually freed.
See bpf_map_put() in kernel/bpf/syscall.c.
By using workqueue, there is no ganrantee that map will be actually
freed after a couple of rcu grace periods. This patch removed
such map leak detection and then the test can pass consistently.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240322061353.632136-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f803bcf920 ]
In some systems, the netcat server can incur in delay to start listening.
When this happens, the test can randomly fail in various points.
This is an example error message:
# ip gre none gso
# encap 192.168.1.1 to 192.168.1.2, type gre, mac none len 2000
# test basic connectivity
# Ncat: Connection refused.
The issue stems from a race condition between the netcat client and server.
The test author had addressed this problem by implementing a sleep, which
I have removed in this patch.
This patch introduces a function capable of sleeping for up to two seconds.
However, it can terminate the waiting period early if the port is reported
to be listening.
Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240314105911.213411-1-alessandro.carminati@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 40eec1795c upstream.
The creation of new subflows can fail for different reasons. If no
subflow have been created using the received ADD_ADDR, the related
counters should not be updated, otherwise they will never be decremented
for events related to this ID later on.
For the moment, the number of accepted ADD_ADDR is only decremented upon
the reception of a related RM_ADDR, and only if the remote address ID is
currently being used by at least one subflow. In other words, if no
subflow can be created with the received address, the counter will not
be decremented. In this case, it is then important not to increment
pm.add_addr_accepted counter, and not to modify pm.accept_addr bit.
Note that this patch does not modify the behaviour in case of failures
later on, e.g. if the MP Join is dropped or rejected.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. The broadcast IP address is added before the "valid"
address that will be used to successfully create a subflow, and the
limit is decreased by one: without this patch, it was not possible to
create the last subflow, because:
- the broadcast address would have been accepted even if it was not
usable: the creation of a subflow to this address results in an error,
- the limit of 2 accepted ADD_ADDR would have then been reached.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-3-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in pm_netlink.c because commit 12a18341b5 ("mptcp: send
ADD_ADDR echo before create subflows") is not present in this version,
and it changes the context, but not the block that needs to be moved.
Conflicts in the selftests, because many features modifying the whole
file have been added later, e.g. commit ae7bd9ccec ("selftests:
mptcp: join: option to execute specific tests"). The same
modifications have been reported to the old code: simply moving one
line, and changing the limits. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
