[ Upstream commit 7aa6bc3e87 ]
iomap_adjust_read_range() assumes that the position and length passed in
are block-aligned. This is not always the case however, as shown in the
syzbot generated case for erofs. This causes too many bytes to be
skipped for uptodate blocks, which results in returning the incorrect
position and length to read in. If all the blocks are uptodate, this
underflows length and returns a position beyond the folio.
Fix the calculation to also take into account the block offset when
calculating how many bytes can be skipped for uptodate blocks.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Miguel Gazquez (Schneider Electric) <miguel.gazquez@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 813f8136a2 ]
xlog_recover_do_reg_buffer() replays each dirty region described by a
buffer log item's bitmap into the buffer read for that item:
memcpy(xfs_buf_offset(bp, (uint)bit << XFS_BLF_SHIFT),
item->ri_buf[i].iov_base,
nbits << XFS_BLF_SHIFT);
The destination offset (bit/nbits, from the logged dirty bitmap) and the
buffer size (from the logged blf_len) are both attacker-controlled and
otherwise unrelated, yet the only thing bounding the copy is an ASSERT(),
which compiles away on production kernels. A crafted image logging a
small blf_len together with a bitmap bit past the end of that buffer
drives the memcpy() past the buffer's allocation, corrupting adjacent
kernel heap during mount-time log recovery. This is reachable by anyone
who can get a crafted image mounted -- the malicious-filesystem threat
model XFS already guards against elsewhere.
Turn the ASSERT() into a real XFS_IS_CORRUPT() check that aborts recovery
of the buffer with -EFSCORRUPTED, consistent with the validate-and-fail
idiom already used in xlog_recover_do_inode_buffer() and
xfs_dquot_item_recover.c. xlog_recover_do_reg_buffer() therefore becomes
STATIC int and its three callers propagate the error.
Found and confirmed with KASAN on a CONFIG_XFS_DEBUG=n build: the crafted
image trips a slab-out-of-bounds write before this change and fails
recovery cleanly with -EFSCORRUPTED after it.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Ibrahim Hashimov <security@auditcode.ai>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
[ adapted `ri_buf[]` field names `iov_base`/`iov_len` to 5.15's `i_addr`/`i_len` and dropped the hunks for the absent `xlog_recover_do_primary_sb_buffer()` and primary-SB branch while keeping the `error = 0` reset ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b7eea80be2 upstream.
xfs_attr3_leaf_verify_entry() accesses lentry/rentry fields (namelen,
valuelen) before checking if the entry pointer itself is within bounds.
If nameidx is crafted to point near the end of the buffer, these field
accesses can read out-of-bounds before the bounds check at
name_end > buf_end is performed.
Add explicit bounds checks for entry pointers before accessing their
fields. Use offsetof() to check that the start of the flexible array
member (nameval/name) is within bounds, which ensures all preceding
fields are safe to access.
Fixes: c84760659d ("xfs: check attribute leaf block structure")
Cc: <stable@vger.kernel.org> # v5.5
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 409a7f12a0 upstream.
When ext4_xattr_make_inode_space() returns -ENOSPC,
ext4_expand_extra_isize_ea() can retry the expansion with
s_min_extra_isize. If that retry succeeds by finding enough ibody free
space, control jumps directly to the shift label.
The previous -ENOSPC is still stored in error in that path, so the
function can update i_extra_isize but still return -ENOSPC to the
caller. Clear error before retrying so a successful fallback expansion
returns success.
Reproduced with an ext4 image using 1 KiB blocks, project quota support,
256-byte inodes, and min_extra_isize/want_extra_isize set to 32.
FS_IOC_FSSETXATTR failures dropped from 802 to 86 after the fix.
Fixes: 69f3a3039b ("ext4: introduce ITAIL helper")
Cc: stable@vger.kernel.org
Signed-off-by: Guanghui Yang <3497809730@qq.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/tencent_192F8A699EFD21126E02101131C9546F3C08@qq.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54b6bd4089 upstream.
ext4_xattr_block_set() retries when a cache entry selected for reuse
has a saturated reference count after taking the buffer lock. The retry
returns to the mbcache lookup without making that entry ineligible, so
it can select the same unusable entry indefinitely. A task spinning
there can hold the parent directory's i_rwsem and leave concurrent
rmdir callers blocked.
Normally a reusable entry has a reference count below
EXT4_XATTR_REFCOUNT_MAX because the count and MBE_REUSABLE_B are
updated under the same buffer lock. A corrupted filesystem can violate
that invariant. The syzbot reproducer reports allocator and xattr
corruption before triggering this retry loop.
Check the untrusted on-disk count before incrementing it, avoiding
overflow, and clear MBE_REUSABLE_B when it is already saturated. The
next lookup then skips the entry that was just proven unusable. This
mirrors the normal transition at EXT4_XATTR_REFCOUNT_MAX; the release
path marks the entry reusable again on the exact 1024-to-1023
transition.
Using the same QEMU harness and guest parameters, current unpatched
Linux hung in 6 of 8 420-second trials with the do_rmdir signature;
representative NMI backtraces caught the owner spinning in
ext4_xattr_block_set(). The patched kernel completed 28 of 28 trials
without a hung-task report; the final twelve trials exercised the
reviewed overflow-safe form of the change. syzbot's patch testing also
completed without reproducing the hang.
Reported-and-tested-by: syzbot+e68dbebd9617a9250e8d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e68dbebd9617a9250e8d
Fixes: 65f8b80053 ("ext4: fix race when reusing xattr blocks")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Goergens <matthias.goergens@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: syzbot+e68dbebd9617a9250e8d@syzkaller.appspotmail.com
Tested-by: syzbot+e68dbebd9617a9250e8d@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20260802065941.1726052-1-matthias.goergens@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0cdc7dde00 upstream.
[BUG]
lsetxattr() panics the kernel when setting a large xattr value on a
fragmented filesystem where the file already has an external xattr
block.
[CAUSE]
ocfs2_calc_xattr_set_need() never reserves metadata blocks for a new
xattr value's extent tree when the file already has an external xattr
block. The not_found path leaves meta_add at zero, so meta_ac is NULL
when ocfs2_xattr_extend_allocation() runs.
A new value root has room for a single extent record. On a fragmented
filesystem, the allocator cannot satisfy the xattr value in one
contiguous run, so each non-contiguous run requires its own extent
record. When the value root's extent list is full and meta_ac is NULL,
ocfs2_add_clusters_in_btree() returns RESTART_META, and
ocfs2_xattr_extend_allocation() hits BUG_ON(why == RESTART_META).
[FIX]
The case where no xattr block exists yet already calls
ocfs2_extend_meta_needed(&def_xv.xv.xr_list) to reserve value tree
metadata. Add the same reservation to the case where an xattr block
already exists, making the two cases consistent.
Replace the BUG_ON with a -ENOSPC return so that if RESTART_META is
returned despite the reservation, the error propagates to userspace
instead of panicking the kernel.
Link: https://lore.kernel.org/amLwn3i9tET8yhG7@dev
Fixes: a78f9f4668 ("ocfs2: make xattr extension work with new local alloc reservation.")
Signed-off-by: Ian Bridges <icb@fastmail.org>
Reported-by: syzbot+e538032956b1157914a3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e538032956b1157914a3
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Heming Zhao <heming.zhao@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa5990ca8f upstream.
For MISC_FMT_OPEN_FILE entries load_misc_binary() clones the
registered interpreter file and denies write access to the clone via
plain deny_write_access(). The clone is installed as
bprm->interpreter and later released by the exec machinery through
exe_file_allow_write_access() which skips the i_writecount increment
for files with FMODE_FSNOTIFY_HSM set.
The deny and allow side can therefore come to different conclusions
when pre-content watches are in play: if a pre-content watch is added
to the interpreter after registration every subsequent exec through
that entry takes a write denial on the clone that is never paired
with a write allowance, driving the interpreter inode's i_writecount
further down with each exec and leaving the interpreter unwritable
even after the entry and all its users are gone.
Take the write denial via exe_file_deny_write_access() so both sides
of the pairing base their decision on the same file mode, and
propagate failure instead of silently ignoring it: an interpreter
that is concurrently open for writing now fails the exec with
ETXTBSY, exactly like an interpreter freshly opened via open_exec()
would.
Link: https://patch.msgid.link/20260710-work-binfmt_misc-locking-v3-2-a162f7cb58d6@kernel.org
Fixes: 0357ef03c9 ("fs: don't block write during exec on pre-content watched files")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit db1856ea91 ]
Registering an entry with the MISC_FMT_OPEN_FILE flag opens the
interpreter via open_exec() which denies write access to it for as
long as the entry exists. Removing the entry closes the interpreter
file via filp_close() but never restores write access, leaving the
inode's i_writecount permanently negative. Opening the interpreter
for writing keeps failing with ETXTBSY long after the entry is gone
until the inode is evicted from the inode cache.
Commit 90f601b497 ("binfmt_misc: restore write access before
closing files opened by open_exec()") fixed the same imbalance in the
error path of bm_register_write() but the actual removal path has
been leaking the write denial since the introduction of the flag.
Restore write access in put_binfmt_handler() before closing the
interpreter file.
Link: https://patch.msgid.link/20260710-work-binfmt_misc-locking-v3-1-a162f7cb58d6@kernel.org
Fixes: 948b701a60 ("binfmt_misc: add persistent opened binary handler for containers")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0357ef03c9 ]
Commit 2a010c4128 ("fs: don't block i_writecount during exec") removed
the legacy behavior of getting ETXTBSY on attempt to open and executable
file for write while it is being executed.
This commit was reverted because an application that depends on this
legacy behavior was broken by the change.
We need to allow HSM writing into executable files while executed to
fill their content on-the-fly.
To that end, disable the ETXTBSY legacy behavior for files that are
watched by pre-content events.
This change is not expected to cause regressions with existing systems
which do not have any pre-content event listeners.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241128142532.465176-1-amir73il@gmail.com
Stable-dep-of: db1856ea91 ("binfmt_misc: restore write access when removing an entry")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cb469993b3 ]
Unauthenticated client can send multiple successful SMB2 NEGOTIATE
requests on one connection before SESSION_SETUP. While the connection is
in KSMBD_SESS_NEED_SETUP, smb2_handle_negotiate() accepts another
SMB3.1.1 NEGOTIATE and overwrites conn->preauth_info with a new allocation.
Only the final allocation is freed when the connection is released, leaking
one object for every additional successful request.
A repeated SMB2 NEGOTIATE after a dialect has been selected is a protocol
violation. MS-SMB2 section 3.3.5.4 requires the server to disconnect
without replying in this case. Set the connection exiting when rejecting
the request, in addition to suppressing the response.
Reject SMB2 NEGOTIATE unless the connection is new or is waiting for the
SMB2 NEGOTIATE that follows an SMB1 multi-protocol negotiate. Serialize
both SMB1 and SMB2 negotiation paths under conn->srv_mutex, since they
update connection-wide dialect and negotiation state.
Move the locking contract to ksmbd_smb_negotiate_common(), where the state
and dialect are selected, and add ksmbd_conn_new() for consistent state
access.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Reported-by: Runa Takemoto <takemotoruna223@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fe4ed2f09b ]
If client send parallel smb2 negotiate request on same connection,
ksmbd_conn can be racy. smb2 negotiate handling that are not
performance-related can be serialized with conn lock.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: cb469993b3 ("ksmbd: reject repeated SMB2 NEGOTIATE requests")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cfc0b8e508 ]
The receive path applies the minimum SMB2 PDU size check only when
ProtocolId is SMB2_PROTO_NUMBER. A packet carrying
SMB2_TRANSFORM_PROTO_NUM bypasses the check even when the negotiated
dialect does not provide transform handling.
On an SMB 2.1 connection, a short transform packet therefore reaches
init_smb2_rsp_hdr(), which interprets the request as a full SMB2 header
and reads beyond the request allocation. The copied fields can then be
returned to the unauthenticated client.
Compression transforms are converted to ordinary SMB2 messages before
protocol validation. After that conversion, validate ordinary SMB2
requests against SMB2_MIN_SUPPORTED_PDU_SIZE and require encryption
transform requests to contain both a transform header and an SMB2
header. This rejects truncated requests before work allocation.
Fixes: 368ba06881 ("ksmbd: check the validation of pdu_size in ksmbd_conn_handler_loop")
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-31063
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4c7d8eb9a7 ]
The minimum SMB2 PDU size should be updated to the size of
`struct smb2_pdu` (that is, the size of `struct smb2_hdr` + 2).
Suggested-by: David Howells <dhowells@redhat.com>
Suggested-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: cfc0b8e508 ("ksmbd: validate minimum PDU size for transform requests")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3b9c30eb8f ]
Since the RFC1002 header has been removed from `struct smb_hdr`,
the minimum SMB1 PDU size should be updated as well.
Fixes: 83bfbd0bb9 ("cifs: Remove the RFC1002 header from smb_hdr")
Suggested-by: David Howells <dhowells@redhat.com>
Suggested-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: cfc0b8e508 ("ksmbd: validate minimum PDU size for transform requests")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0b444cfd8b ]
With the removal of the RFC1002 length field from the SMB header,
smb2_get_msg is now used to get the smb1 request from the request buffer.
Since this function is no longer exclusive to smb2 and now supports smb1
as well, This patch rename it to smb_get_msg to better reflect its usage.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: cfc0b8e508 ("ksmbd: validate minimum PDU size for transform requests")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 749d7aa037 ]
do_thaw_all_callback() calls bdev_thaw() while holding sb->s_umount
exclusively. If the block device was frozen via bdev_freeze() dropping
the last block layer freeze reference calls fs_bdev_thaw() which
reacquires s_umount:
do_thaw_all_callback(sb)
super_lock_excl(sb) # holds sb->s_umount
bdev_thaw(sb->s_bdev)
mutex_lock(&bdev->bd_fsfreeze_mutex)
# bd_fsfreeze_count drops 1 -> 0
bd_holder_ops->thaw == fs_bdev_thaw
get_bdev_super(bdev)
bdev_super_lock(bdev, true)
super_lock(sb, true)
down_write(&sb->s_umount) # same task: deadlock
The emergency thaw worker deadlocks against itself holding both
s_umount and bd_fsfreeze_mutex. That fscks any subsequent unmount,
freeze, or thaw of that filesystem and block device.
[ 81.878470] sysrq: Show Blocked State
[ 81.880140] task:kworker/0:1 state:D stack:0 pid:11 tgid:11 ppid:2 task_flags:0x4208060 flags:0x00080000
[ 81.884876] Workqueue: events do_thaw_all
[ 81.886656] Call Trace:
[ 81.887759] <TASK>
[ 81.888763] __schedule+0x579/0x1420
[ 81.890372] schedule+0x3a/0x100
[ 81.891794] schedule_preempt_disabled+0x15/0x30
[ 81.893848] rwsem_down_write_slowpath+0x1ea/0x900
[ 81.895191] ? __pfx_do_thaw_all_callback+0x10/0x10
[ 81.896528] down_write+0xbd/0xc0
[ 81.897505] super_lock+0x91/0x180
[ 81.898457] ? __mutex_lock+0xa99/0x1140
[ 81.900748] ? __mutex_unlock_slowpath+0x1f/0x400
[ 81.902069] bdev_super_lock+0x5b/0x150
[ 81.903132] get_bdev_super+0x10/0x60
[ 81.904042] fs_bdev_thaw+0x23/0xf0
[ 81.904755] bdev_thaw+0x82/0x100
[ 81.905484] do_thaw_all_callback+0x2c/0x50
[ 81.906298] __iterate_supers+0x5d/0x130
[ 81.907067] do_thaw_all+0x20/0x40
[ 81.907739] process_one_work+0x206/0x5e0
[ 81.908545] worker_thread+0x1e2/0x3c0
[ 81.909339] ? __pfx_worker_thread+0x10/0x10
[ 81.910171] kthread+0xf4/0x130
[ 81.910799] ? __pfx_kthread+0x10/0x10
[ 81.911528] ret_from_fork+0x2e2/0x3b0
[ 81.912259] ? __pfx_kthread+0x10/0x10
[ 81.913010] ret_from_fork_asm+0x1a/0x30
[ 81.913806] </TASK>
bdev_super_lock() even documents the violated requirement with
lockdep_assert_not_held(&sb->s_umount).
Acquiring bd_fsfreeze_mutex under s_umount also inverts the
bd_fsfreeze_mutex vs. s_umount ordering established by
bdev_{freeze,thaw}() and can thus ABBA against a concurrent block-layer
freeze even when the recursive path isn't hit.
Fix this by not holding s_umount around the bdev_thaw() loop at all. Pin
the superblock with an active reference instead as
filesystems_freeze_callback() does. The active reference keeps the
superblock from being shut down and so ->s_bdev stays valid without
holding s_umount. The block-layer-held freeze is dropped by
fs_bdev_thaw() with FREEZE_MAY_NEST | FREEZE_HOLDER_USERSPACE exactly as
a regular unfreeze would and thaw_super_locked() handles
filesystem-level freezes as before.
The emergency thaw path has deadlocked like this in one form or
another for a long long time but the current exclusively-held
shape dates back to commit [1] where thaw_bdev() already ended in
thaw_super() with s_umount held by do_thaw_all_callback().
Fixes: 08fdc8a013 ("buffer.c: call thaw_super during emergency thaw") [1]
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260723-work-super-emergency_thaw-v1-1-7c315c600245@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c74801ee52 ]
In ntlm_authenticate(), destroy_previous_session() is called using a
user pointer resolved from the client-supplied NTLM blob username field
before the NTLMv2 response is validated. An authenticated attacker can
set the NTLM blob username to match a victim account and set
PreviousSessionId to the victim's session ID; destroy_previous_session()
destroys the victim's session while ksmbd_decode_ntlmssp_auth_blob()
subsequently rejects the request with -EPERM.
Move destroy_previous_session() and the prev_id assignment to after
ksmbd_decode_ntlmssp_auth_blob() returns success and use sess->user
rather than the pre-authentication lookup result. This matches the
ordering already used by krb5_authenticate(), where
destroy_previous_session() is called only after
ksmbd_krb5_authenticate() returns success.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-cifs/20260702155449.3639773-1-james_montgomery@disroot.org/
Signed-off-by: James Montgomery <james_montgomery@disroot.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 50958bb928 ]
A reader can hang forever in __ceph_get_caps() when the client no
longer holds `FILE_RD`, but local cap state still says that the
capability is already wanted (via `mds_wanted`).
One way to trigger this is through MDS cap revocation. If another
client performs a conflicting operation, the MDS can revoke `FILE_RD`
from the reader; the next read then has to reacquire `FILE_RD`. If
the cap update that should request `FILE_RD` never reaches the MDS
after `cap->mds_wanted` was raised, the reader is left holding only
non-file caps while local `mds_wanted` still includes the file read
caps.
In that state, try_get_cap_refs() sees `need <= mds_wanted` and
returns 0, so __ceph_get_caps() just waits on `i_cap_wq`. If the cap
update that was supposed to request `FILE_RD never reaches the MDS
after `cap->mds_wanted was` raised, no further request is sent and the
waiter can sleep indefinitely until unrelated cap traffic happens to
wake it up.
The ordering issue is that `cap->mds_wanted` is updated in
__prep_cap() before the `CEPH_MSG_CLIENT_CAPS message` is actually
queued for send. That makes one field serve two different meanings at
once: what this client wants, and what the client believes the MDS
already knows it wants.
A proper fix would be to split those states and track whether a cap
update is actually in flight or has been observed by the MDS.
However, simply moving the `cap->mds_wanted assignment` later would
not be sufficient: queueing the message in the messenger does not
guarantee that the MDS processed that specific wanted set, and
reconnect or message loss can still invalidate that assumption.
Fixing that properly would require a larger rework of the cap state
machine.
To allow simpler backports to stable kernels, this patch implements a
simpler workaround:
- stop waiting forever in __ceph_get_caps(); after a bounded wait,
fall back to the renew path
- make ceph_renew_caps() issue a synchronous `OPEN` request whenever
the inode still does not actually hold the wanted caps, instead of
only calling ceph_check_caps()
The extra issued-vs-wanted check in ceph_renew_caps() is necessary
because the previous test only checked whether the inode still had any
real caps at all. That is not enough after revocation: the client can
still hold something like `pLs` and yet be missing `FILE_RD`
completely. In that case, falling back to ceph_check_caps() is not
sufficient, because it still trusts `cap->mds_wanted` and may resend
nothing. By requiring `(issued & wanted) == wanted` before taking the
asynchronous path, the code only uses ceph_check_caps() when the
`wanted caps` are already actually issued. Otherwise, it sends the
synchronous `OPEN` renew.
This preserves the existing asynchronous fast path when the wanted
caps are already issued, avoids changing cap-state semantics, and
fixes the hang by guaranteeing that a stalled waiter eventually
retries through a path that does not rely on the stale `mds_wanted`
state.
[ idryomov: move CEPH_GET_CAPS_WAIT_TIMEOUT from libceph.h to
mds_client.h, formatting ]
Cc: stable@vger.kernel.org
Fixes: 0a454bdd50 ("ceph: reorganize __send_cap for less spinlock abuse")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 38d46409c4 ]
Multiple CephFS mounts on a host is increasingly common so
disambiguating messages like this is necessary and will make it easier
to debug issues.
At the same this will improve the debug logs to make them easier to
troubleshooting issues, such as print the ino# instead only printing
the memory addresses of the corresponding inodes and print the dentry
names instead of the corresponding memory addresses for the dentry,etc.
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Stable-dep-of: 50958bb928 ("ceph: fix hanging __ceph_get_caps() with stale mds_wanted")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5995d90d2d ]
We need to covert the inode to ceph_client in the following commit,
and will add one new helper for that, here we rename the old helper
to _fs_client().
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Stable-dep-of: 50958bb928 ("ceph: fix hanging __ceph_get_caps() with stale mds_wanted")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5b602344a4 ]
handle_reply() stores a `ceph_mds_request` pointer in
`current->journal_info` while filling the inode and dentry cache from
an MDS reply.
An allocation in this section can enter direct reclaim and prune
dentries from another filesystem. If this dirties an ext4 inode, ext4
starts a JBD2 transaction. JBD2 interprets the Ceph request in
`current->journal_info` as a journal handle and dereferences the
request's `r_tid` as `h_transaction`, causing a kernel crash, e.g.:
Unable to handle kernel paging request at virtual address 00000000077b4818
[...]
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 6 UID: 0 PID: 2699135 Comm: kworker/6:3 Tainted: G W 6.18.38-i3 #1113 NONE
[...]
Workqueue: ceph-msgr ceph_con_workfn
pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : jbd2__journal_start+0x2c/0x208
lr : __ext4_journal_start_sb+0x100/0x178
[...]
Call trace:
jbd2__journal_start+0x2c/0x208 (P)
__ext4_journal_start_sb+0x100/0x178
ext4_dirty_inode+0x3c/0x90
__mark_inode_dirty+0x58/0x400
iput.part.0+0x2b0/0x370
iput+0x18/0x30
dentry_unlink_inode+0xc0/0x158
__dentry_kill+0x80/0x250
shrink_dentry_list+0x90/0x130
prune_dcache_sb+0x60/0x98
super_cache_scan+0xe8/0x190
do_shrink_slab+0x174/0x388
shrink_slab+0xd8/0x4c0
shrink_node+0x31c/0x908
do_try_to_free_pages+0xd0/0x508
try_to_free_pages+0x11c/0x238
__alloc_frozen_pages_noprof+0x4d0/0xdd0
__folio_alloc_noprof+0x18/0x70
__filemap_get_folio+0x248/0x440
ceph_readdir_prepopulate+0x570/0x9e8
mds_dispatch+0x1424/0x1ba0
ceph_con_process_message+0x74/0xa0
ceph_con_v1_try_read+0x3a0/0x1510
ceph_con_workfn+0x260/0x460
Enter a scoped NOFS allocation context and leave it after clearing
`journal_info`. This prevents filesystem reclaim from recursing into
another filesystem while the field contains Ceph-private data.
Cc: stable@vger.kernel.org
Fixes: 315f240880 ("ceph: fix security xattr deadlock")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Reviewed-by: Xiubo Li <xiubo.li@clyso.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e348eecd4d ]
ovl_copy_up_tmpfile() stores the disconnected O_TMPFILE dentry as the
overlay's upper dentry reference via ovl_inode_update(). vfs_tmpfile()
allocated this dentry via d_alloc(parentpath->dentry, &slash_name), so
d_name is "/" and d_parent is c->workdir. Local upper filesystems
(ext4, btrfs, xfs, ...) immediately rename it to "#<inum>" via
d_mark_tmpfile() inside their ->tmpfile() op; FUSE and virtiofs do
not, so both fields stay that way. Neither identifies the destination
directory and filename where ovl_do_link() actually linked the file.
When the upper filesystem implements ->d_revalidate() (e.g. FUSE or
virtiofs), ovl_revalidate_real() calls it with the dentry's parent
inode and a snapshot of d_name. The server tries to look up "/" inside
c->workdir, fails, and overlayfs reports -ESTALE.
This causes persistent ESTALE errors for any file that was copied up via
the tmpfile path, breaking dpkg, apt, and other tools that do
rename-over-existing on overlayfs with a FUSE/virtiofs upper.
Before commit 6b52243f63 ("ovl: fold copy-up helpers into callers"),
the tmpfile copy-up path used a dedicated helper ovl_link_tmpfile()
that captured the linked destination dentry returned by ovl_do_link():
err = ovl_do_link(temp, udir, upper);
...
if (!err)
*newdentry = dget(upper);
and published it via ovl_inode_update(d_inode(c->dentry), newdentry).
The fold inlined ovl_do_link() into ovl_copy_up_tmpfile() but dropped
the dget(upper) capture, and rewrote the publish line as
ovl_inode_update(d_inode(c->dentry), dget(temp)) — where temp is the
disconnected O_TMPFILE dentry.
Fix by keeping a reference to the linked destination dentry after
ovl_do_link() succeeds, and publishing that dentry at the existing
ovl_inode_update() call site. The non-tmpfile/workdir path continues to
publish the renamed temporary dentry.
Reproducer:
- Mount overlayfs with virtiofs (or a FUSE fs whose server advertises
FUSE_TMPFILE) as upper
- Run: dpkg -i <any .deb>
- Observe: "error installing new file '...': Stale file handle"
Fixes: 6b52243f63 ("ovl: fold copy-up helpers into callers")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Souvik Banerjee <souvik@amlalabs.com>
Link: https://patch.msgid.link/20260501232735.2610824-1-souvik@amlalabs.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1c0ae3df69 ]
set_file_allocation_info() converts the client-supplied
FILE_ALLOCATION_INFORMATION::AllocationSize into a 512-byte block
count with:
alloc_blks = (le64_to_cpu(file_alloc_info->AllocationSize) + 511) >> 9;
AllocationSize is a fully client-controlled __le64 field; the only
validation performed by the caller (smb2_set_info_file(), case
FILE_ALLOCATION_INFORMATION) is that the fixed buffer is at least
sizeof(struct smb2_file_alloc_info) == 8 bytes. The value itself is
never range-checked before this arithmetic.
When AllocationSize is close to U64_MAX (e.g. 0xffffffffffffffff),
"AllocationSize + 511" wraps around mod 2^64 to a small number
(0xffffffffffffffff + 511 = 510), so alloc_blks becomes 0. Since any
existing regular file has stat.blocks > 0, the function then takes
the "shrink" branch and calls:
ksmbd_vfs_truncate(work, fp, alloc_blks * 512); /* == 0 */
silently truncating the file to size 0, even though the client asked
to grow the allocation to (what looks like) the maximum possible
size. The trailing "if (size < alloc_blks * 512) i_size_write(inode,
size);" restore is guarded by a comparison that is never true once
alloc_blks == 0, so the truncation is not undone. This lets an
authenticated SMB client that already holds an open handle with
FILE_WRITE_DATA on a file silently truncate that same file to size 0
via a single crafted SET_INFO(FILE_ALLOCATION_INFORMATION) request
advertising a near-U64_MAX AllocationSize, even though the request
asks to grow the file's allocation rather than shrink it. This is a
functional/data-loss bug, not a privilege-boundary
violation: the same client could already truncate the file via
FILE_END_OF_FILE_INFORMATION or a plain write.
Fix it by validating AllocationSize against MAX_LFS_FILESIZE, the
same upper bound the VFS itself uses to reject unrepresentable file
sizes, before doing the "+511" rounding, and rejecting oversized
values with -EINVAL. Bounding AllocationSize to
MAX_LFS_FILESIZE - 511 guarantees the "+511" addition cannot wrap,
and that the subsequent "alloc_blks * 512" values passed to
vfs_fallocate() and ksmbd_vfs_truncate() stay within a representable
loff_t as well.
No legitimate SMB client asks for an allocation size anywhere near
2^64 bytes, so this only rejects a value that was previously
silently misinterpreted as zero.
Runtime-verified on a v6.19 KASAN test stand: sending SET_INFO
(FILE_ALLOCATION_INFORMATION) with AllocationSize = 0xffffffffffffffff
against ksmbd now returns -EINVAL and leaves the target file's size
unchanged, where the unpatched kernel truncated it from 4096 to 0
bytes.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Ibrahim Hashimov <security@auditcode.ai>
Assisted-by: AuditCode-AI:2026.07
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 806c00c23e ]
Currently in smb3_simple_fallocate_range(), a 1 MB buffer is allocated
using kzalloc(). Under heavy memory fragmentation, a contiguous 1 MB block
of physical memory (an order-8 allocation) may not be available,
causing the allocation to fail.
This failure was observed during xfstests generic/013 on a 4GB RAM
test machine running fsstress:
fsstress: page allocation failure: order:8,
mode:0x40dc0(GFP_KERNEL|__GFP_ZERO|__GFP_COMP),
nodemask=(null),cpuset=/,mems_allowed=0
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
warn_alloc+0x163/0x190
__alloc_pages_slowpath.constprop.0+0x71b/0x12f0
__alloc_frozen_pages_noprof+0x2f6/0x340
alloc_pages_mpol+0xb6/0x170
___kmalloc_large_node+0xb3/0xd0
__kmalloc_large_noprof+0x1e/0xc0
smb3_simple_falloc.isra.0+0x62b/0x960
cifs_fallocate+0xed/0x180
vfs_fallocate+0x165/0x3c0
__x64_sys_fallocate+0x48/0xa0
do_syscall_64+0xe1/0x640
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Node 0 Normal: 3375*4kB ... 7*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB
Since this scratch buffer does not require physically contiguous memory,
switch the allocation to kvzalloc(). This retains the performance
benefits of kmalloc() under normal conditions, while gracefully falling
back to virtually contiguous memory when physical allocation fails.
Fixes: 966a3cb7c7 ("cifs: improve fallocate emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Fredric Cover <fredric.cover.lkernel@gmail.com>
Tested-by: Fredric Cover <fredric.cover.lkernel@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 574aa0b479 ]
v9fs_dec_count() unconditionally calls drop_nlink() on regular files,
even when the inode's nlink is already zero. In cacheless mode the
client refetches inode metadata from the server (the source of truth)
on every operation, so by the time v9fs_remove() returns, the locally
cached nlink may already reflect the post-unlink value:
1. Client initiates unlink, server processes it and sets nlink to 0
2. Client refetches inode metadata (nlink=0) before unlink returns
3. Client's v9fs_remove() completes successfully
4. Client calls v9fs_dec_count() which calls drop_nlink() on nlink=0
This race is easily triggered under heavy unlink workloads, such as
stress-ng's unlink stressor, producing the following warning:
WARNING: fs/inode.c:417 at drop_nlink+0x4c/0xc8
Call trace:
drop_nlink+0x4c/0xc8
v9fs_remove+0x1e0/0x250 [9p]
v9fs_vfs_unlink+0x20/0x38 [9p]
vfs_unlink+0x13c/0x258
...
In cacheless mode the server is authoritative and the inode is on its
way out, so locally adjusting nlink buys nothing. Skip v9fs_dec_count()
entirely when neither CACHE_META nor CACHE_LOOSE is set, which both
avoids the warning and removes a class of nlink races (two concurrent
unlinkers observing nlink > 0 and both calling drop_nlink()) that an
nlink == 0 guard alone would only narrow rather than close.
Fixes: ac89b2ef9b ("9p: don't maintain dir i_nlink if the exported fs doesn't either")
Cc: stable@vger.kernel.org
Suggested-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Message-ID: <20260421-9p-v2-1-48762d294fad@debian.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
[ Adapted `v9ses->cache & (CACHE_META | CACHE_LOOSE)` bitmask test to the pre-bitmask exclusive enum form `v9ses->cache != CACHE_LOOSE && v9ses->cache != CACHE_FSCACHE`. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f1df9d771d ]
indx_insert_into_buffer() computes
used = used1 - to_copy - sp_size;
memmove(de_t, Add2Ptr(sp, sp_size), used - le32_to_cpu(hdr1->de_off));
where sp and sp_size come from hdr_find_split(). hdr_find_split()
walks entries by le16_to_cpu(e->size) without validating that each
step stays within hdr->used or that the size field is at least
sizeof(struct NTFS_DE). index_hdr_check(), the on-load gatekeeper,
only validates header-level fields (used, total, de_off) and does
not walk per-entry sizes.
A crafted NTFS image whose leaf INDEX_HDR reports used == total but
contains one interior NTFS_DE with size = 0xFFF0 therefore passes
validation, descends to indx_insert_into_buffer() through the
ntfs_create() -> indx_insert_entry() path, and makes hdr_find_split()
return an sp whose sp_size (0xFFF0) greatly exceeds the remaining
bytes in the buffer. The u32 subtraction underflows and the memmove
count becomes a near-4-GiB value, producing an out-of-bounds kernel
write that corrupts adjacent allocations and panics the kernel.
Reproduced on 7.0.0-rc7 with UML + KASAN via a crafted image and a
single 'touch' inside the mounted directory; crash site resolves to
fs/ntfs3/index.c at the memmove. Trigger requires only local mount
of an attacker-supplied filesystem image (USB, loopback, or removable
media auto-mount).
Reject the split whenever the chosen sp plus its declared size
already extends past hdr1->used. This is the minimal fix; it
preserves the existing hdr_find_split() contract and relies on the
same out: cleanup path as the pre-existing error returns.
A prior OOB read in the very same indx_insert_into_buffer() memmove
was fixed in commit b8c4494904 ("fs/ntfs3: Fix OOB read in
indx_insert_into_buffer") by tightening hdr_find_e(), but that fix
does not cover the split-point size field path addressed here: sp is
returned by hdr_find_split(), not hdr_find_e(), and the underflow is
driven by sp->size rather than hdr->used exceeding hdr->total.
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Cc: stable@vger.kernel.org
Reported-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e66af07ca2 ]
None of callers check the return value of ntfs_update_mftmirr(), so make
it return void to make code simpler.
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Stable-dep-of: 5e7b598660 ("fs/ntfs3: bound copy_lcns dp->page_lcns[] index in analysis pass")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 76a53de6f7 ]
audit_alloc_mark() and audit_get_nd() both need to perform a path
lookup getting the parent dentry (which must exist) and the final
target (following a LAST_NORM name) which sometimes doesn't need to
exist.
They don't need the parent to be locked, but use kern_path_locked() or
kern_path_locked_negative() anyway. This is somewhat misleading to the
casual reader.
This patch introduces a more targeted function, kern_path_parent(),
which returns not holding locks. On success the "path" will
be set to the parent, which must be found, and the return value is the
dentry of the target, which might be negative.
This will clear the way to rename kern_path_locked() which is
otherwise only used to prepare for removing something.
It also allows us to remove kern_path_locked_negative(), which is
transformed into the new kern_path_parent().
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 81905b5acb ("audit: fix recursive locking deadlock in audit_dupe_exe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb6b2cc1fc upstream.
When working on a new features that reuses the existing pad in the
superblock, I noticed that mounting such a file system on an old kernel
logs a rather confusing warning:
XFS (vdc): Metadir superblock padding fields must be zero.
This is because we only validate the various feature fields in v5
superblocks after the common superblock validation helper is called.
Fix this by calling the feature validation first.
Fixes: eca383fcd6 ("xfs: refactor superblock verifiers")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63320a0f70 upstream.
xfs_dq_get_next_id() takes the quota inode ILOCK before calling
xfs_iread_extents(). If xfs_iread_extents() fails, the function returns
immediately without releasing the lock, leaking the quota inode ILOCK.
This can leave the quota inode locked and cause subsequent quota
operations to hang.
Fix this by jumping to a common unlock path on error instead of returning
directly.
Fixes: bda250dbaf ("xfs: rewrite xfs_dq_get_next_id using xfs_iext_lookup_extent")
Cc: stable@vger.kernel.org # v4.12
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c11c4bfdb upstream.
CEPH_MDS_IS_READY() is parsed so that the ternary expression can
return true for an MDS entry with state 0 when it is not laggy. This
allows the random selector to choose a down/DNE rank.
Group the ternary expression under the state check so zero-state ranks
are not treated as ready.
Cc: stable@vger.kernel.org
Fixes: b38c9eb475 ("ceph: add possible_max_rank and make the code more readable")
Link: https://tracker.ceph.com/issues/78648
Signed-off-by: Yiming Zhu <zhuyiming@kuaishou.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf6c993c0f upstream.
fscrypt_ioctl_set_policy() calls inode_owner_or_capable() with
&nop_mnt_idmap before allowing an encryption policy to be set, instead
of the idmap of the mount the ioctl was issued on.
fscrypt is used by filesystems that support idmapped mounts (e.g. ext4,
f2fs), so on such a mount this compares the caller's fsuid against the
unmapped on-disk owner rather than the mapped owner: the actual owner
can be wrongly denied with -EACCES and an unrelated caller wrongly
allowed. Use file_mnt_idmap(filp) instead.
Fixes: 14f3db5542 ("ext4: support idmapped mounts")
Cc: stable@vger.kernel.org
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Link: https://patch.msgid.link/20260725080004.929328-1-zhanxusheng1024@gmail.com
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 696c030e1e upstream.
Change mk_users (the set of user claims to an fscrypt master key) from a
'struct key' keyring to a simple linked list.
It's still a collection of 'struct key' for quota tracking. It was
originally thought to be natural that a collection of 'struct key'
should be held in a 'struct key' keyring. In reality, it's just been
causing problems, similar to how using 'struct key' for the filesystem
keyring caused problems and was removed in commit d7e7b9af10
("fscrypt: stop using keyrings subsystem for fscrypt_master_key").
Commit d3a7bd4200 ("fscrypt: clear keyring before calling key_put()")
fixed mk_users cleanup to be synchronous. But that apparently wasn't
enough: the keyring subsystem's redundant locking is still generating
lockdep false positives due to the interaction with filesystem reclaim.
With the simple list, the redundant locking and lockdep issue goes away.
Of course, searching a linked list is linear-time whereas the
'struct key' keyring used a fancy constant-time associative array. But
that's fine here, since in practice there's just one entry in the list.
In fact the new code is much faster in practice, since it's much smaller
and doesn't have to convert the kuid_t into a string to search for it.
Reported-by: syzbot+f55b043dacf43776b50c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f55b043dacf43776b50c
Reported-by: Mohammed EL Kadiri <med08elkadiri@gmail.com>
Closes: https://lore.kernel.org/keyrings/20260614150041.21172-1-med08elkadiri@gmail.com/
Fixes: 23c688b540 ("fscrypt: allow unprivileged users to add/remove keys for v2 policies")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260618221921.87896-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf616096a0 ]
Dan Aloni reports that he was able to hit a use-after-free bug if a
FREE_STATEID operation gets delayed for whatever reason. Fix this by
bumping the refcount of the 'struct nfs_server' object for the duration
of the FREE_STATEID so it doesn't get cleaned up from underneath us
while operations are still in flight.
Reported-by: Dan Aloni <dan.aloni@vastdata.com>
Fixes: 7c1d5fae4a ("NFSv4: Convert nfs41_free_stateid to use an asynchronous RPC call")
Tested-by: Dan Aloni <dan.aloni@vastdata.com>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 576acc2591 ]
During umount, the session slot tables are freed. If there are
outstanding FREE_STATEID tasks, a use-after-free and slab corruption can
occur when rpc_exit_task calls rpc_call_done -> nfs41_sequence_done ->
nfs4_sequence_process/nfs41_sequence_free_slot.
Prevent that from happening by taking a reference on the nfs_client in
nfs41_free_stateid and putting it in nfs41_free_stateid_release.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: cf616096a0 ("NFS: Pin the 'struct nfs_server' during a FREE_STATEID call")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6dd3c6884c ]
One should *not* be allowed to mount one of those, new API or not.
Reported-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://patch.msgid.link/20260602020444.GP2636677@ZenIV
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
[Denis: rename new_mnt -> newmount.mnt]
[Denis: use goto err_unlock instead of direct return]
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8e85d50ba1 upstream.
The registration string starts with a user chosen delimiter that
separates the individual fields. So that the field parsers terminate
even on a truncated string create_entry() pads the buffer with that
same delimiter:
memset(buf + count, del, 8);
Most fields are scanned for the delimiter with strchr()/scanarg() and
happily stop on the padding. The flags field is different: instead of
scanning for the delimiter check_special_flags() consumes the flag
characters 'P', 'O', 'C' and 'F' and stops at the first byte that is
none of them, relying on the trailing delimiter to end the scan.
If the delimiter is itself a flag character the padding no longer acts
as a terminator. The scan swallows all eight padding bytes and keeps
reading past the end of the allocation until it hits a byte that is
not a flag character. For example registering
PaPEPPxPPiP
with 'P' as the delimiter (name "a", type extension, magic "x",
interpreter "i", empty flags) leaves the flag scan running off the end
of the buffer. The registration is rejected in the end because the
parser does not stop exactly at buf + count, but only after the out of
bounds read has already happened. With an unlucky allocation layout the
scan can walk into an unmapped page; under KASAN it is reported as a
slab out of bounds read. binfmt_misc mounts are available to
unprivileged users in a user namespace so the read is reachable without
privileges.
Reject a delimiter that is one of the flag characters up front. Such a
registration was always rejected anyway, only after the out of bounds
read, so no valid registration string changes meaning.
Link: https://patch.msgid.link/20260710-work-binfmt_misc-locking-v3-3-a162f7cb58d6@kernel.org
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6a3e16d60e ]
CIFSSMBRead(), CIFSSMBWrite() and CIFSSMBWrite2() allocate a request
buffer before checking whether tcon->ses->server is NULL. If that
defensive check ever fails, the helper returns -ECONNABORTED without
releasing the request buffer.
Fix these leaks by releasing the allocated request buffer before
returning from these error paths. Use cifs_small_buf_release() for the
buffers allocated by small_smb_init() and cifs_buf_release() for the
buffer allocated by smb_init().
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings.
Runtime validation used a temporary fault-injection hook to force
tcon->ses->server to NULL after request-buffer initialization. On the
unfixed kernel, the harness observed two leaked small request buffers and
one leaked large request buffer, with directed kmemleak dumps confirming
the CIFS buffer allocation stacks. After the fix, no CIFS request-buffer
deltas remained.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3349ef6a36 upstream.
The program header scan handles PT_INTERP from a switch nested in the
scan loop, so its break leaves the switch and not the loop. A binary
carrying more than one PT_INTERP runs the case again and overwrites both
interpreter_name and interpreter. The previous name allocation leaks and
so does the previous interpreter reference, along with the write denial
open_exec() took on it. The denial is never released, so the file stays
unwritable for as long as the system runs.
An unprivileged caller reaches this with a crafted binary and repeats it
at will. binfmt_elf stops at the first PT_INTERP. Do the same here.
The flaw dates back to the driver's introduction in the pre-git history
tree introduced in v2.6.11 by 91808d6ebe39 ("[PATCH] FRV: Add FDPIC ELF
binary format driver").
Link: https://patch.msgid.link/20260721-gezittert-medium-kreide-b41fc1f0277e@brauner
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Jori Koolstra <jkoolstra@xs4all.nl>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4dbc71bcaf upstream.
ceph_handle_caps() reads snap_trace_len from the wire-format
ceph_mds_caps header and uses it unconditionally to build a fake
end pointer (snaptrace + snaptrace_len) that is later handed to
ceph_update_snap_trace() in the CEPH_CAP_OP_IMPORT case:
snaptrace = h + 1;
snaptrace_len = le32_to_cpu(h->snap_trace_len);
p = snaptrace + snaptrace_len;
...
case CEPH_CAP_OP_IMPORT:
if (snaptrace_len) {
...
if (ceph_update_snap_trace(mdsc, snaptrace,
snaptrace + snaptrace_len,
false, &realm)) { ... }
ceph_update_snap_trace() then decodes a struct ceph_mds_snap_realm
from snaptrace using ceph_decode_need(&p, e, sizeof(*ri), bad)
with the attacker-supplied fake end e == snaptrace + snaptrace_len.
With snaptrace_len == 0xFFFFFFFF the bound check is trivially
satisfied, ri = p reads sizeof(struct ceph_mds_snap_realm) past
the legitimate msg->front buffer, and ri->num_snaps /
ri->num_prior_parent_snaps then drive further out-of-bounds
reads of the encoded snap arrays.
The eleven msg_version >= 2 .. msg_version >= 12 decoder blocks
above the op switch each catch this OOB through their
ceph_decode_*_safe() / ceph_decode_need() helpers, but they sit
behind a hdr.version-gated if, so a malicious or compromised
MDS that sets msg->hdr.version = 1 reaches the IMPORT path with
no version-gated decoder having validated snap_trace_len. The
shape has been present since ceph_handle_caps() was introduced.
Validate snap_trace_len against the message front buffer before
consuming it, using the canonical ceph_decode_need() / ceph_has_room()
helper. The helper bounds the length with subtraction (n <= end - p,
guarded by end >= p) rather than pointer addition, so it is wrap-safe
for the attacker-controlled u32 length on 32-bit builds where
p + snap_trace_len could overflow the address space. This matches the
rest of the ceph decode path (e.g. the pool_ns_len check a few lines
below), and the existing goto bad cleanup already covers this exit
path.
Cc: stable@vger.kernel.org
Fixes: a8599bd821 ("ceph: capability management")
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bbf5f63991 upstream.
load_misc_binary() raises bprm->have_execfd as soon as it sees the 'O'
(or 'C') flag. This happens well before it opens the interpreter. If
that open fails the flag stays set on the bprm. binfmt_misc is at the
head of the format list so an interpreter open failure that returns
-ENOEXEC lets the search fall through to a later format. This means it
runs the matched binary directly having never staged an interpreter. So
bprm->executable is NULL while have_execfd falsely claims a descriptor
is present.
Consequently, begin_new_exec() dereferences the missing executable:
would_dump(bprm, bprm->executable);
and NULL derefs. Had it not, the hand-off later in the same function
would have failed anyway. FD_ADD(0, bprm->executable) rejects a NULL
file with -ENOMEM. Both sites are past the point of no return so the
exec cannot be unwound either way.
This can be reached by unprivileged users as binfmt_misc can be mounted
in user namespaces. So a user can register an 'O' entry whose
interpreter lives on a FUSE mount, have the FUSE server fail the open
with -ENOEXEC and execute a native ELF file that matches the entry.
have_execfd only means anything alongside the executable it describes
which is not set until the interpreter has been opened and staged.
So lets raise it there, next to execfd_creds, which is already set at
that point. An open failure now leaves it clear, so the fallback format
derives credentials from the binary and emits no AT_EXECFD, as it would
for any native exec. The argv rewrite load_misc_binary() performs before
the open is still not undone. This means the binary sees the interpreter
path in argv[0] and its own path in argv[1] but that predates this
change and only became observable once the exec stopped faulting.
Link: https://patch.msgid.link/20260720-beglichen-kognitiv-organismus-5e1e55326c56@brauner
Fixes: bc2bf338d5 ("exec: Remove recursion from search_binary_handler")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 16cc4f5c1c upstream.
The stop value is derived from bprm->p >> PAGE_SHIFT. The index variable
is an unsigned long. If bprm->p drops below PAGE_SIZE and stop becomes
zero the loop condition index >= stop is always true.
After the index == 0 iteration the decrement wraps to ULONG_MAX and
bprm->page[ULONG_MAX] reads sizeof(void *) bytes in front of the array.
The pointer has wrapped to -1. That garbage pointer is then passed to
kmap_local_page() and PAGE_SIZE bytes are copied from wherever that
lands into the stack of the process being created. And the loop doesn't
terminate either...
Getting there only requires bprm->p < PAGE_SIZE. On !MMU
bprm_set_stack_limit() and bprm_hit_stack_limit() are empty. So the only
constraint on how far bprm->p is pushed down is valid_arg_len(), i.e.
that each individual string still fits in what is left.
bprm->p starts at PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *) so a
single argument or environment string of a little over 31 pages leaves
it in the first page:
Oops - load access fault [#1]
CPU: 0 UID: 0 PID: 1 Comm: victim Not tainted 7.2.0-rc4 #1
epc : __memcpy+0xd4/0xf8
ra : transfer_args_to_stack+0xaa/0xae
s4 : ffffffffffffffff s2 : 0000000000000000
a1 : ffffffdc98000000 a2 : 0000000000001000
status: 0000000a00001880 badaddr: ffffffdc98000000 cause: 0000000000000005
[<801a5324>] __memcpy+0xd4/0xf8
[<800d5f6a>] load_flat_binary+0x43a/0x65e
[<800a2de4>] bprm_execve+0x1d4/0x316
[<800a351a>] do_execveat_common+0x12e/0x138
[<800a3d44>] __riscv_sys_execve+0x38/0x4e
Kernel panic - not syncing: Fatal exception in interrupt
This is an arcane bug but we should still fix it.
Count down from MAX_ARG_PAGES so the loop ends when index reaches stop,
stop == 0 included. The iterations performed are unchanged for every
other value of stop.
Only CONFIG_MMU=n builds are affected, transfer_args_to_stack() is used
by binfmt_flat and binfmt_elf_fdpic on nommu only.
The loop predates git history. commit 7e7ec6a934
("elf_fdpic_transfer_args_to_stack(): make it generic") only moved it
from binfmt_elf_fdpic.c into fs/exec.c and narrowed the copy to the used
part of the first page. The condition and the decrement are unchanged
from 2.6.12-rc2.
Link: https://patch.msgid.link/20260721-hochachtung-staumauer-pigmente-15d71f7d7d04@brauner
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6a8269b645 ]
__add_reloc_root() allocates a mapping_node before inserting it into
rc->reloc_root_tree. If rb_simple_insert() finds an existing entry, it
returns the existing rb_node and leaves the newly allocated node unlinked.
The error path then returns -EEXIST without freeing the new node. Since
the node was never inserted into reloc_root_tree, the later cleanup in
put_reloc_control() cannot find it either.
Free the newly allocated node before returning -EEXIST.
The callers currently assert that -EEXIST should not happen, so this is a
defensive cleanup for an unexpected duplicate insert path. If the path is
ever reached, the local allocation should still be released.
Fixes: 57a304cfd4 ("btrfs: do not panic in __add_reloc_root")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Guanghui Yang <3497809730@qq.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15b38176fd ]
When ksmbd validates a compound (chained) SMB2 request,
ksmbd_smb2_check_message() reads pdu->StructureSize2 without first
checking that the compound element is large enough to contain it.
StructureSize2 is a 2-byte field at offset 64
(__SMB2_HEADER_STRUCTURE_SIZE) from the start of each element.
The compound-walking logic only guarantees that a full 64-byte SMB2
header is present for the trailing element: when NextCommand is 0, len is
reduced to the number of bytes remaining after next_smb2_rcv_hdr_off. A
remote client can craft a compound request whose last element has exactly
64 bytes, so the 2-byte StructureSize2 read at offset 64 extends one byte
past the receive buffer, producing a slab-out-of-bounds read.
BUG: KASAN: slab-out-of-bounds in ksmbd_smb2_check_message (fs/smb/server/smb2misc.c:402)
Read of size 2 at addr ffff888012ae31ac by task kworker/0:1/14
The buggy address is located 172 bytes inside of allocated 173-byte region
Workqueue: ksmbd-io handle_ksmbd_work
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
ksmbd_smb2_check_message (fs/smb/server/smb2misc.c:402)
handle_ksmbd_work (fs/smb/server/server.c:119)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Reject any compound element that is too small to hold StructureSize2
before dereferencing it.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b09ae45d85 ]
smb3_simple_fallocate_range() can skip holes when an allocated range
returned by the server starts before the current fallocate offset. The
skipped hole is not zero-filled, but fallocate still returns success. A
later write to that hole may therefore fail with ENOSPC.
The function queries allocated ranges so that it can preserve existing
contents and write zeroes only into holes. However, the server may return
a range that starts before the current fallocate offset.
For example, assume the fallocate request is [100, 400) and the only
allocated range returned by the server is [0, 200):
Request: [100, 400)
Server range: [ 0, 200) allocated
Correct:
[100, 200) allocated data, skip
[200, 400) hole, zero-fill
Current:
[100, 300) skipped
[300, 400) zero-filled afterwards
The current code adds the full server range length, 200, to the current
offset 100 and moves to 300. As a result, the hole in [200, 300) is
skipped without being zero-filled.
Fix this by advancing only over the part of the allocated range that
overlaps the current fallocate offset. Ignore ranges that end before the
current offset and reject ranges whose end offset overflows.
This also prevents a malformed range length from causing an out-of-bounds
zero-buffer read.
Fixes: 966a3cb7c7 ("cifs: improve fallocate emulation")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce6050bafb ]
If we have an unexpected reloc_root for our root, we jump to the out label
but never drop the reference we obtained for root, resulting in a leak.
Add a missing btrfs_put_root() call.
Fixes: 24213fa46c ("btrfs: do proper error handling in merge_reloc_roots")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2d8d5647e ]
When loading a v1 free space cache, __load_free_space_cache() takes
num_entries and num_bitmaps straight from the on-disk
btrfs_free_space_header. That header is stored in the tree_root under a key
with type 0, which the tree-checker has no case for, so neither count is
validated before the load trusts it.
The load loops num_entries times and maps the next page whenever the current
one runs out, going through io_ctl_check_crc() -> io_ctl_map_page(), which
does io_ctl->pages[io_ctl->index++]. But pages[] is allocated in
io_ctl_init() from the cache inode's i_size, not from num_entries:
num_pages = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE);
io_ctl->pages = kcalloc(num_pages, sizeof(struct page *), GFP_NOFS);
So if num_entries claims more records than the pages can hold, io_ctl->index
runs off the end of pages[]. The write side never hits this because
io_ctl_add_entry() and io_ctl_add_bitmap() both stop once
io_ctl->index >= io_ctl->num_pages; the read side just never had the same
check.
To trigger it, take a clean cache (num_entries = <N> here), set num_entries
in the header to 0x10000, and fix up the leaf checksum so it still passes
the tree-checker. The cache inode has i_size = 65536, so num_pages is 16 and
pages[] is a 16-pointer (kmalloc-128) array. The load now tries to read
65536 entries, io_ctl->index walks up to 16, and pages[16] is read past the
array:
BUG: KASAN: slab-out-of-bounds in io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565)
Read of size 8 at addr ffff88800c833a80 by task kworker/u8:3/58
io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565)
__load_free_space_cache (fs/btrfs/free-space-cache.c:655 fs/btrfs/free-space-cache.c:820)
load_free_space_cache (fs/btrfs/free-space-cache.c:1017)
caching_thread (fs/btrfs/block-group.c:880)
btrfs_work_helper (fs/btrfs/async-thread.c:312)
process_one_work
worker_thread
kthread
ret_from_fork
free-space-cache.c:420 is io_ctl_map_page(), inlined into io_ctl_check_crc()
at line 565, which is why that is the frame KASAN names. The out-of-bounds
slot is then treated as a struct page and handed to crc32c(), so the bad
read turns into a GP fault.
Add the missing check to io_ctl_check_crc(), which is where both the entry
loop and the bitmap loop end up. When num_entries is too large the load now
fails like any corrupt cache: __load_free_space_cache() drops it and rebuilds
the free space from the extent tree, so a valid cache is never rejected.
Reported-by: Weiming Shi <bestswngs@gmail.com>
Fixes: 5b0e95bf60 ("Btrfs: inline checksums into the disk free space cache")
Link: https://lore.kernel.org/linux-btrfs/CAPpSM+RMPByMCKXvM5QFKToxsyNccfuFLWMdD0mfd0wh2Ja62w@mail.gmail.com/
Assisted-by: Claude:claude-opus-4-8
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
