commit 9c6d778800 upstream.
Automatic kernel fuzzing revealed a recursive locking violation in
usb-storage:
============================================
WARNING: possible recursive locking detected
5.18.0 #3 Not tainted
--------------------------------------------
kworker/1:3/1205 is trying to acquire lock:
ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at:
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230
but task is already holding lock:
ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at:
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230
...
stack backtrace:
CPU: 1 PID: 1205 Comm: kworker/1:3 Not tainted 5.18.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_deadlock_bug kernel/locking/lockdep.c:2988 [inline]
check_deadlock kernel/locking/lockdep.c:3031 [inline]
validate_chain kernel/locking/lockdep.c:3816 [inline]
__lock_acquire.cold+0x152/0x3ca kernel/locking/lockdep.c:5053
lock_acquire kernel/locking/lockdep.c:5665 [inline]
lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5630
__mutex_lock_common kernel/locking/mutex.c:603 [inline]
__mutex_lock+0x14f/0x1610 kernel/locking/mutex.c:747
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230
usb_reset_device+0x37d/0x9a0 drivers/usb/core/hub.c:6109
r871xu_dev_remove+0x21a/0x270 drivers/staging/rtl8712/usb_intf.c:622
usb_unbind_interface+0x1bd/0x890 drivers/usb/core/driver.c:458
device_remove drivers/base/dd.c:545 [inline]
device_remove+0x11f/0x170 drivers/base/dd.c:537
__device_release_driver drivers/base/dd.c:1222 [inline]
device_release_driver_internal+0x1a7/0x2f0 drivers/base/dd.c:1248
usb_driver_release_interface+0x102/0x180 drivers/usb/core/driver.c:627
usb_forced_unbind_intf+0x4d/0xa0 drivers/usb/core/driver.c:1118
usb_reset_device+0x39b/0x9a0 drivers/usb/core/hub.c:6114
This turned out not to be an error in usb-storage but rather a nested
device reset attempt. That is, as the rtl8712 driver was being
unbound from a composite device in preparation for an unrelated USB
reset (that driver does not have pre_reset or post_reset callbacks),
its ->remove routine called usb_reset_device() -- thus nesting one
reset call within another.
Performing a reset as part of disconnect processing is a questionable
practice at best. However, the bug report points out that the USB
core does not have any protection against nested resets. Adding a
reset_in_progress flag and testing it will prevent such errors in the
future.
Link: https://lore.kernel.org/all/CAB7eexKUpvX-JNiLzhXBDWgfg2T9e9_0Tw4HQ6keN==voRbP0g@mail.gmail.com/
Cc: stable@vger.kernel.org
Reported-and-tested-by: Rondreis <linhaoguo86@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YwkflDxvg0KWqyZK@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1e5c2f0cb upstream.
Fix incorrect pin assignment values when connecting to a monitor with
Type-C receptacle instead of a plug.
According to specification, an UFP_D receptacle's pin assignment
should came from the UFP_D pin assignments field (bit 23:16), while
an UFP_D plug's assignments are described in the DFP_D pin assignments
(bit 15:8) during Mode Discovery.
For example the LG 27 UL850-W is a monitor with Type-C receptacle.
The monitor responds to MODE DISCOVERY command with following
DisplayPort Capability flag:
dp->alt->vdo=0x140045
The existing logic only take cares of UPF_D plug case,
and would take the bit 15:8 for this 0x140045 case.
This results in an non-existing pin assignment 0x0 in
dp_altmode_configure.
To fix this problem a new set of macros are introduced
to take plug/receptacle differences into consideration.
Fixes: 0e3bb7d689 ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Co-developed-by: Pablo Sun <pablo.sun@mediatek.com>
Co-developed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20220804034803.19486-1-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 508362ac66 ]
Before this commit, the BPF verifier required ARG_PTR_TO_MEM arguments
to be followed by ARG_CONST_SIZE holding the size of the memory region.
The helpers had to check that size in runtime.
There are cases where the size expected by a helper is a compile-time
constant. Checking it in runtime is an unnecessary overhead and waste of
BPF registers.
This commit allows helpers to accept pointers to memory without the
corresponding ARG_CONST_SIZE, given that they define the memory region
size in struct bpf_func_proto and use ARG_PTR_TO_FIXED_SIZE_MEM type.
arg_size is unionized with arg_btf_id to reduce the kernel image size,
and it's valid because they are used by different argument types.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220615134847.3753567-3-maximmi@nvidia.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ec9fce4b3 ]
Commit 451ef36bd2 ("ip_tunnels: Add new flow flags field to ip_tunnel_key")
added a "flow_flags" member to struct ip_tunnel_key which was later used by
the commit in the fixes tag to avoid dropping packets with sources that
aren't locally configured when set in bpf_set_tunnel_key().
VXLAN and GENEVE were made to respect this flag, ip tunnels like IPIP and GRE
were not.
This commit fixes this omission by making ip_tunnel_init_flow() receive
the flow flags from the tunnel key in the relevant collect_md paths.
Fixes: b8fff74852 ("bpf: Set flow flag to allow any source IP in bpf_tunnel_key")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Paul Chaignon <paul@isovalent.com>
Link: https://lore.kernel.org/bpf/20220818074118.726639-1-eyal.birger@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a90ed8d0c ]
On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI
specification (see Table 4.13 "PM1 Control Registers Fixed Hardware
Feature Control Bits" for the details).
Fix the mask and other related definitions accordingly.
Fixes: 93e5eadd1f ("x86/platform: New Intel Atom SOC power management controller driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220801113734.36131-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2555283eb4 upstream.
anon_vma->degree tracks the combined number of child anon_vmas and VMAs
that use the anon_vma as their ->anon_vma.
anon_vma_clone() then assumes that for any anon_vma attached to
src->anon_vma_chain other than src->anon_vma, it is impossible for it to
be a leaf node of the VMA tree, meaning that for such VMAs ->degree is
elevated by 1 because of a child anon_vma, meaning that if ->degree
equals 1 there are no VMAs that use the anon_vma as their ->anon_vma.
This assumption is wrong because the ->degree optimization leads to leaf
nodes being abandoned on anon_vma_clone() - an existing anon_vma is
reused and no new parent-child relationship is created. So it is
possible to reuse an anon_vma for one VMA while it is still tied to
another VMA.
This is an issue because is_mergeable_anon_vma() and its callers assume
that if two VMAs have the same ->anon_vma, the list of anon_vmas
attached to the VMAs is guaranteed to be the same. When this assumption
is violated, vma_merge() can merge pages into a VMA that is not attached
to the corresponding anon_vma, leading to dangling page->mapping
pointers that will be dereferenced during rmap walks.
Fix it by separately tracking the number of child anon_vmas and the
number of VMAs using the anon_vma as their ->anon_vma.
Fixes: 7a3ef208e6 ("mm: prevent endless growth of anon_vma hierarchy")
Cc: stable@kernel.org
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a0133723f upstream.
Syzkaller reports refcount bug as follows:
------------[ cut here ]------------
refcount_t: saturated; leaking memory.
WARNING: CPU: 1 PID: 3605 at lib/refcount.c:19 refcount_warn_saturate+0xf4/0x1e0 lib/refcount.c:19
Modules linked in:
CPU: 1 PID: 3605 Comm: syz-executor208 Not tainted 5.18.0-syzkaller-03023-g7e062cda7d90 #0
<TASK>
__refcount_add_not_zero include/linux/refcount.h:163 [inline]
__refcount_inc_not_zero include/linux/refcount.h:227 [inline]
refcount_inc_not_zero include/linux/refcount.h:245 [inline]
sk_psock_get+0x3bc/0x410 include/linux/skmsg.h:439
tls_data_ready+0x6d/0x1b0 net/tls/tls_sw.c:2091
tcp_data_ready+0x106/0x520 net/ipv4/tcp_input.c:4983
tcp_data_queue+0x25f2/0x4c90 net/ipv4/tcp_input.c:5057
tcp_rcv_state_process+0x1774/0x4e80 net/ipv4/tcp_input.c:6659
tcp_v4_do_rcv+0x339/0x980 net/ipv4/tcp_ipv4.c:1682
sk_backlog_rcv include/net/sock.h:1061 [inline]
__release_sock+0x134/0x3b0 net/core/sock.c:2849
release_sock+0x54/0x1b0 net/core/sock.c:3404
inet_shutdown+0x1e0/0x430 net/ipv4/af_inet.c:909
__sys_shutdown_sock net/socket.c:2331 [inline]
__sys_shutdown_sock net/socket.c:2325 [inline]
__sys_shutdown+0xf1/0x1b0 net/socket.c:2343
__do_sys_shutdown net/socket.c:2351 [inline]
__se_sys_shutdown net/socket.c:2349 [inline]
__x64_sys_shutdown+0x50/0x70 net/socket.c:2349
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
During SMC fallback process in connect syscall, kernel will
replaces TCP with SMC. In order to forward wakeup
smc socket waitqueue after fallback, kernel will sets
clcsk->sk_user_data to origin smc socket in
smc_fback_replace_callbacks().
Later, in shutdown syscall, kernel will calls
sk_psock_get(), which treats the clcsk->sk_user_data
as psock type, triggering the refcnt warning.
So, the root cause is that smc and psock, both will use
sk_user_data field. So they will mismatch this field
easily.
This patch solves it by using another bit(defined as
SK_USER_DATA_PSOCK) in PTRMASK, to mark whether
sk_user_data points to a psock object or not.
This patch depends on a PTRMASK introduced in commit f1ff5ce2cd
("net, sk_msg: Clear sk_user_data pointer on clone if tagged").
For there will possibly be more flags in the sk_user_data field,
this patch also refactor sk_user_data flags code to be more generic
to improve its maintainability.
Reported-and-tested-by: syzbot+5f26f85569bd179c18ce@syzkaller.appspotmail.com
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d17a112e9 upstream.
Link lost is treated as fatal error with commit c99b9b2301 ("scsi: ufs:
Treat link loss as fatal error"), but the event isn't registered as
interrupt source. Enable it.
Link: https://lore.kernel.org/r/1659404551-160958-1-git-send-email-kwmad.kim@samsung.com
Fixes: c99b9b2301 ("scsi: ufs: Treat link loss as fatal error")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dbb16df644 upstream.
This reverts commit 96e51ccf1a.
Recently we started running the kernel with rstat infrastructure on
production traffic and begin to see negative memcg stats values.
Particularly the 'sock' stat is the one which we observed having negative
value.
$ grep "sock " /mnt/memory/job/memory.stat
sock 253952
total_sock 18446744073708724224
Re-run after couple of seconds
$ grep "sock " /mnt/memory/job/memory.stat
sock 253952
total_sock 53248
For now we are only seeing this issue on large machines (256 CPUs) and
only with 'sock' stat. I think the networking stack increase the stat on
one cpu and decrease it on another cpu much more often. So, this negative
sock is due to rstat flusher flushing the stats on the CPU that has seen
the decrement of sock but missed the CPU that has increments. A typical
race condition.
For easy stable backport, revert is the most simple solution. For long
term solution, I am thinking of two directions. First is just reduce the
race window by optimizing the rstat flusher. Second is if the reader sees
a negative stat value, force flush and restart the stat collection.
Basically retry but limited.
Link: https://lkml.kernel.org/r/20220817172139.3141101-1-shakeelb@google.com
Fixes: 96e51ccf1a ("memcg: cleanup racy sum avoidance code")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: <stable@vger.kernel.org> [5.15]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c7d7cc2b4 upstream.
There are two problems with the current code of memory_intersects:
First, it doesn't check whether the region (begin, end) falls inside the
region (virt, vend), that is (virt < begin && vend > end).
The second problem is if vend is equal to begin, it will return true but
this is wrong since vend (virt + size) is not the last address of the
memory region but (virt + size -1) is. The wrong determination will
trigger the misreporting when the function check_for_illegal_area calls
memory_intersects to check if the dma region intersects with stext region.
The misreporting is as below (stext is at 0x80100000):
WARNING: CPU: 0 PID: 77 at kernel/dma/debug.c:1073 check_for_illegal_area+0x130/0x168
DMA-API: chipidea-usb2 e0002000.usb: device driver maps memory from kernel text or rodata [addr=800f0000] [len=65536]
Modules linked in:
CPU: 1 PID: 77 Comm: usb-storage Not tainted 5.19.0-yocto-standard #5
Hardware name: Xilinx Zynq Platform
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from __warn+0xb0/0x198
__warn from warn_slowpath_fmt+0x80/0xb4
warn_slowpath_fmt from check_for_illegal_area+0x130/0x168
check_for_illegal_area from debug_dma_map_sg+0x94/0x368
debug_dma_map_sg from __dma_map_sg_attrs+0x114/0x128
__dma_map_sg_attrs from dma_map_sg_attrs+0x18/0x24
dma_map_sg_attrs from usb_hcd_map_urb_for_dma+0x250/0x3b4
usb_hcd_map_urb_for_dma from usb_hcd_submit_urb+0x194/0x214
usb_hcd_submit_urb from usb_sg_wait+0xa4/0x118
usb_sg_wait from usb_stor_bulk_transfer_sglist+0xa0/0xec
usb_stor_bulk_transfer_sglist from usb_stor_bulk_srb+0x38/0x70
usb_stor_bulk_srb from usb_stor_Bulk_transport+0x150/0x360
usb_stor_Bulk_transport from usb_stor_invoke_transport+0x38/0x440
usb_stor_invoke_transport from usb_stor_control_thread+0x1e0/0x238
usb_stor_control_thread from kthread+0xf8/0x104
kthread from ret_from_fork+0x14/0x2c
Refactor memory_intersects to fix the two problems above.
Before the 1d7db834a0 ("dma-debug: use memory_intersects()
directly"), memory_intersects is called only by printk_late_init:
printk_late_init -> init_section_intersects ->memory_intersects.
There were few places where memory_intersects was called.
When commit 1d7db834a0 ("dma-debug: use memory_intersects()
directly") was merged and CONFIG_DMA_API_DEBUG is enabled, the DMA
subsystem uses it to check for an illegal area and the calltrace above
is triggered.
[akpm@linux-foundation.org: fix nearby comment typo]
Link: https://lkml.kernel.org/r/20220819081145.948016-1-quanyang.wang@windriver.com
Fixes: 9795593625 ("asm/sections: add helpers to check for section data")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thierry Reding <treding@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8db24af3f0 ]
While reading gro_normal_batch, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 323ebb61e3 ("net: use listified RX for handling GRO_NORMAL skbs")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5612ca10d ]
While reading sysctl_devconf_inherit_init_net, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes: 856c395cfa ("net: introduce a knob to control whether to inherit devconf config")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af67508ea6 ]
While reading sysctl_fb_tunnels_only_for_init_net, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes: 79134e6ce2 ("net: do not create fallback tunnels for non-default namespaces")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c42b7cddea ]
While reading sysctl_net_busy_poll, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 0602129286 ("net: add low latency socket poll")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9afb4b2734 ]
To clear the flow table on flow table free, the following sequence
normally happens in order:
1) gc_step work is stopped to disable any further stats/del requests.
2) All flow table entries are set to teardown state.
3) Run gc_step which will queue HW del work for each flow table entry.
4) Waiting for the above del work to finish (flush).
5) Run gc_step again, deleting all entries from the flow table.
6) Flow table is freed.
But if a flow table entry already has pending HW stats or HW add work
step 3 will not queue HW del work (it will be skipped), step 4 will wait
for the pending add/stats to finish, and step 5 will queue HW del work
which might execute after freeing of the flow table.
To fix the above, this patch flushes the pending work, then it sets the
teardown flag to all flows in the flowtable and it forces a garbage
collector run to queue work to remove the flows from hardware, then it
flushes this new pending work and (finally) it forces another garbage
collector run to remove the entry from the software flowtable.
Stack trace:
[47773.882335] BUG: KASAN: use-after-free in down_read+0x99/0x460
[47773.883634] Write of size 8 at addr ffff888103b45aa8 by task kworker/u20:6/543704
[47773.885634] CPU: 3 PID: 543704 Comm: kworker/u20:6 Not tainted 5.12.0-rc7+ #2
[47773.886745] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
[47773.888438] Workqueue: nf_ft_offload_del flow_offload_work_handler [nf_flow_table]
[47773.889727] Call Trace:
[47773.890214] dump_stack+0xbb/0x107
[47773.890818] print_address_description.constprop.0+0x18/0x140
[47773.892990] kasan_report.cold+0x7c/0xd8
[47773.894459] kasan_check_range+0x145/0x1a0
[47773.895174] down_read+0x99/0x460
[47773.899706] nf_flow_offload_tuple+0x24f/0x3c0 [nf_flow_table]
[47773.907137] flow_offload_work_handler+0x72d/0xbe0 [nf_flow_table]
[47773.913372] process_one_work+0x8ac/0x14e0
[47773.921325]
[47773.921325] Allocated by task 592159:
[47773.922031] kasan_save_stack+0x1b/0x40
[47773.922730] __kasan_kmalloc+0x7a/0x90
[47773.923411] tcf_ct_flow_table_get+0x3cb/0x1230 [act_ct]
[47773.924363] tcf_ct_init+0x71c/0x1156 [act_ct]
[47773.925207] tcf_action_init_1+0x45b/0x700
[47773.925987] tcf_action_init+0x453/0x6b0
[47773.926692] tcf_exts_validate+0x3d0/0x600
[47773.927419] fl_change+0x757/0x4a51 [cls_flower]
[47773.928227] tc_new_tfilter+0x89a/0x2070
[47773.936652]
[47773.936652] Freed by task 543704:
[47773.937303] kasan_save_stack+0x1b/0x40
[47773.938039] kasan_set_track+0x1c/0x30
[47773.938731] kasan_set_free_info+0x20/0x30
[47773.939467] __kasan_slab_free+0xe7/0x120
[47773.940194] slab_free_freelist_hook+0x86/0x190
[47773.941038] kfree+0xce/0x3a0
[47773.941644] tcf_ct_flow_table_cleanup_work
Original patch description and stack trace by Paul Blakey.
Fixes: c29f74e0df ("netfilter: nf_flow_table: hardware offload support")
Reported-by: Paul Blakey <paulb@nvidia.com>
Tested-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 759eebbcfa ]
Expose nf_flow_table_gc_run() to force a garbage collector run from the
offload infrastructure.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7997eff828 ]
Harshit Mogalapalli says:
In ebt_do_table() function dereferencing 'private->hook_entry[hook]'
can lead to NULL pointer dereference. [..] Kernel panic:
general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[..]
RIP: 0010:ebt_do_table+0x1dc/0x1ce0
Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 5c 16 00 00 48 b8 00 00 00 00 00 fc ff df 49 8b 6c df 08 48 8d 7d 2c 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 88
[..]
Call Trace:
nf_hook_slow+0xb1/0x170
__br_forward+0x289/0x730
maybe_deliver+0x24b/0x380
br_flood+0xc6/0x390
br_dev_xmit+0xa2e/0x12c0
For some reason ebtables rejects blobs that provide entry points that are
not supported by the table, but what it should instead reject is the
opposite: blobs that DO NOT provide an entry point supported by the table.
t->valid_hooks is the bitmask of hooks (input, forward ...) that will see
packets. Providing an entry point that is not support is harmless
(never called/used), but the inverse isn't: it results in a crash
because the ebtables traverser doesn't expect a NULL blob for a location
its receiving packets for.
Instead of fixing all the individual checks, do what iptables is doing and
reject all blobs that differ from the expected hooks.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f369b07c86 upstream.
The motivation of this patch comes from a recent report and patchfix from
David Hildenbrand on hugetlb shared handling of wr-protected page [1].
With the reproducer provided in commit message of [1], one can leverage
the uffd-wp lazy-reset of ptes to trigger a hugetlb issue which can affect
not only the attacker process, but also the whole system.
The lazy-reset mechanism of uffd-wp was used to make unregister faster,
meanwhile it has an assumption that any leftover pgtable entries should
only affect the process on its own, so not only the user should be aware
of anything it does, but also it should not affect outside of the process.
But it seems that this is not true, and it can also be utilized to make
some exploit easier.
So far there's no clue showing that the lazy-reset is important to any
userfaultfd users because normally the unregister will only happen once
for a specific range of memory of the lifecycle of the process.
Considering all above, what this patch proposes is to do explicit pte
resets when unregister an uffd region with wr-protect mode enabled.
It should be the same as calling ioctl(UFFDIO_WRITEPROTECT, wp=false)
right before ioctl(UFFDIO_UNREGISTER) for the user. So potentially it'll
make the unregister slower. From that pov it's a very slight abi change,
but hopefully nothing should break with this change either.
Regarding to the change itself - core of uffd write [un]protect operation
is moved into a separate function (uffd_wp_range()) and it is reused in
the unregister code path.
Note that the new function will not check for anything, e.g. ranges or
memory types, because they should have been checked during the previous
UFFDIO_REGISTER or it should have failed already. It also doesn't check
mmap_changing because we're with mmap write lock held anyway.
I added a Fixes upon introducing of uffd-wp shmem+hugetlbfs because that's
the only issue reported so far and that's the commit David's reproducer
will start working (v5.19+). But the whole idea actually applies to not
only file memories but also anonymous. It's just that we don't need to
fix anonymous prior to v5.19- because there's no known way to exploit.
IOW, this patch can also fix the issue reported in [1] as the patch 2 does.
[1] https://lore.kernel.org/all/20220811103435.188481-3-david@redhat.com/
Link: https://lkml.kernel.org/r/20220811201340.39342-1-peterx@redhat.com
Fixes: b1f9e87686 ("mm/uffd: enable write protection for shmem & hugetlbfs")
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67f4b5dc49 upstream.
Currently, when the writeback code detects a server reboot, it redirties
any pages that were not committed to disk, and it sets the flag
NFS_CONTEXT_RESEND_WRITES in the nfs_open_context of the file descriptor
that dirtied the file. While this allows the file descriptor in question
to redrive its own writes, it violates the fsync() requirement that we
should be synchronising all writes to disk.
While the problem is infrequent, we do see corner cases where an
untimely server reboot causes the fsync() call to abandon its attempt to
sync data to disk and causing data corruption issues due to missed error
conditions or similar.
In order to tighted up the client's ability to deal with this situation
without introducing livelocks, add a counter that records the number of
times pages are redirtied due to a server reboot-like condition, and use
that in fsync() to redrive the sync to disk.
Fixes: 2197e9b06c ("NFS: Fix up fsync() when the server rebooted")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5535be3099 upstream.
Ever since the Dirty COW (CVE-2016-5195) security issue happened, we know
that FOLL_FORCE can be possibly dangerous, especially if there are races
that can be exploited by user space.
Right now, it would be sufficient to have some code that sets a PTE of a
R/O-mapped shared page dirty, in order for it to erroneously become
writable by FOLL_FORCE. The implications of setting a write-protected PTE
dirty might not be immediately obvious to everyone.
And in fact ever since commit 9ae0f87d00 ("mm/shmem: unconditionally set
pte dirty in mfill_atomic_install_pte"), we can use UFFDIO_CONTINUE to map
a shmem page R/O while marking the pte dirty. This can be used by
unprivileged user space to modify tmpfs/shmem file content even if the
user does not have write permissions to the file, and to bypass memfd
write sealing -- Dirty COW restricted to tmpfs/shmem (CVE-2022-2590).
To fix such security issues for good, the insight is that we really only
need that fancy retry logic (FOLL_COW) for COW mappings that are not
writable (!VM_WRITE). And in a COW mapping, we really only broke COW if
we have an exclusive anonymous page mapped. If we have something else
mapped, or the mapped anonymous page might be shared (!PageAnonExclusive),
we have to trigger a write fault to break COW. If we don't find an
exclusive anonymous page when we retry, we have to trigger COW breaking
once again because something intervened.
Let's move away from this mandatory-retry + dirty handling and rely on our
PageAnonExclusive() flag for making a similar decision, to use the same
COW logic as in other kernel parts here as well. In case we stumble over
a PTE in a COW mapping that does not map an exclusive anonymous page, COW
was not properly broken and we have to trigger a fake write-fault to break
COW.
Just like we do in can_change_pte_writable() added via commit 64fe24a3e0
("mm/mprotect: try avoiding write faults for exclusive anonymous pages
when changing protection") and commit 76aefad628 ("mm/mprotect: fix
soft-dirty check in can_change_pte_writable()"), take care of softdirty
and uffd-wp manually.
For example, a write() via /proc/self/mem to a uffd-wp-protected range has
to fail instead of silently granting write access and bypassing the
userspace fault handler. Note that FOLL_FORCE is not only used for debug
access, but also triggered by applications without debug intentions, for
example, when pinning pages via RDMA.
This fixes CVE-2022-2590. Note that only x86_64 and aarch64 are
affected, because only those support CONFIG_HAVE_ARCH_USERFAULTFD_MINOR.
Fortunately, FOLL_COW is no longer required to handle FOLL_FORCE. So
let's just get rid of it.
Thanks to Nadav Amit for pointing out that the pte_dirty() check in
FOLL_FORCE code is problematic and might be exploitable.
Note 1: We don't check for the PTE being dirty because it doesn't matter
for making a "was COWed" decision anymore, and whoever modifies the
page has to set the page dirty either way.
Note 2: Kernels before extended uffd-wp support and before
PageAnonExclusive (< 5.19) can simply revert the problematic
commit instead and be safe regarding UFFDIO_CONTINUE. A backport to
v5.19 requires minor adjustments due to lack of
vma_soft_dirty_enabled().
Link: https://lkml.kernel.org/r/20220809205640.70916-1-david@redhat.com
Fixes: 9ae0f87d00 ("mm/shmem: unconditionally set pte dirty in mfill_atomic_install_pte")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: <stable@vger.kernel.org> [5.16]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 23339e5752 ]
F2FS_IOC_ABORT_VOLATILE_WRITE was used to abort a atomic write before.
However it was removed accidentally. So revive it by changing the name,
since volatile write had gone.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Fiexes: 7bc155fec5b3("f2fs: kill volatile write support")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a971e84a7 ]
For avoiding the potential deadlock via kill_fasync() call, use the
new fasync helpers to defer the invocation from the control API. Note
that it's merely a workaround.
Another note: although we haven't received reports about the deadlock
with the control API, the deadlock is still potentially possible, and
it's better to align the behavior with other core APIs (PCM and
timer); so let's move altogether.
Link: https://lore.kernel.org/r/20220728125945.29533-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef34a0ae7a ]
Currently the call of kill_fasync() from an interrupt handler might
lead to potential spin deadlocks, as spotted by syzkaller.
Unfortunately, it's not so trivial to fix this lock chain as it's
involved with the tasklist_lock that is touched in allover places.
As a temporary workaround, this patch provides the way to defer the
async signal notification in a work. The new helper functions,
snd_fasync_helper() and snd_kill_faync() are replacements for
fasync_helper() and kill_fasync(), respectively. In addition,
snd_fasync_free() needs to be called at the destructor of the relevant
file object.
Link: https://lore.kernel.org/r/20220728125945.29533-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c56a8733d ]
In some circumstances it may be interesting to reconfigure the watchdog
from inside the kernel.
On PowerPC, this may helpful before and after a LPAR migration (LPM) is
initiated, because it implies some latencies, watchdog, and especially NMI
watchdog is expected to be triggered during this operation. Reconfiguring
the watchdog with a factor, would prevent it to happen too frequently
during LPM.
Rename lockup_detector_reconfigure() as __lockup_detector_reconfigure() and
create a new function lockup_detector_reconfigure() calling
__lockup_detector_reconfigure() under the protection of watchdog_mutex.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
[mpe: Squash in build fix from Laurent, reported by Sachin]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713154729.80789-3-ldufour@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfdd231374 ]
Single memory zone feature will remove ZONE_DMA32 and ZONE_DMA and
cause pgtable PA size larger than 32bit.
Since Mediatek IOMMU hardware support at most 35bit PA in pgtable,
so add a quirk to allow the PA of pgtables support up to bit35.
Signed-off-by: Ning Li <ning.li@mediatek.com>
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220630092927.24925-2-yf.wang@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80fc671bcc ]
The uacce driver must deal with a possible removal of the parent device
or parent driver module rmmod at any time.
Although uacce_remove(), called on device removal and on driver unbind,
prevents future use of the uacce fops by removing the cdev, fops that
were called before that point may still be running.
Serialize uacce_fops_open() and uacce_remove() with uacce->mutex.
Serialize other fops against uacce_remove() with q->mutex.
Since we need to protect uacce_fops_poll() which gets called on the fast
path, replace uacce->queues_lock with q->mutex to improve scalability.
The other fops are only used during setup.
uacce_queue_is_valid(), checked under q->mutex or uacce->mutex, denotes
whether uacce_remove() has disabled all queues. If that is the case,
don't go any further since the parent device is being removed and
uacce->ops should not be called anymore.
Reported-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20220701034843.7502-1-zhangfei.gao@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a37599ebfb ]
There are some drivers that can use the Type C mux API, but don't have
to. Introduce CONFIG guards for the mux functions so that drivers can
include the header file and not run into compilation errors on systems
which don't have CONFIG_TYPEC enabled. When CONFIG_TYPEC is not enabled,
the Type C mux functions will be stub versions of the original calls.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20220615172129.1314056-3-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f11bbc2c7 ]
Add UFSHCD_QUIRK_HIBERN_FASTAUTO quirk for host controllers which supports
auto-hibernate the capability but only FASTAUTO mode.
Link: https://lore.kernel.org/r/20220603110524.1997825-4-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6554400d6f ]
Add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS for host controllers which do not
support 64-bit addressing.
Link: https://lore.kernel.org/r/20220603110524.1997825-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9190460084 ]
The ocelot counters are 32-bit and require periodic reading, every 2
seconds, by ocelot_port_update_stats(), so that wraparounds are
detected.
Currently, the counters reported by ocelot_get_stats64() come from the
32-bit hardware counters directly, rather than from the 64-bit
accumulated ocelot->stats, and this is a problem for their integrity.
The strategy is to make ocelot_get_stats64() able to cherry-pick
individual stats from ocelot->stats the way in which it currently reads
them out from SYS_COUNT_* registers. But currently it can't, because
ocelot->stats is an opaque u64 array that's used only to feed data into
ethtool -S.
To solve that problem, we need to make ocelot->stats indexable, and
associate each element with an element of struct ocelot_stat_layout used
by ethtool -S.
This makes ocelot_stat_layout a fat (and possibly sparse) array, so we
need to change the way in which we access it. We no longer need
OCELOT_STAT_END as a sentinel, because we know the array's size
(OCELOT_NUM_STATS). We just need to skip the array elements that were
left unpopulated for the switch revision (ocelot, felix, seville).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22d842e3ef ]
ocelot_get_stats64() currently runs unlocked and therefore may collide
with ocelot_port_update_stats() which indirectly accesses the same
counters. However, ocelot_get_stats64() runs in atomic context, and we
cannot simply take the sleepable ocelot->stats_lock mutex. We need to
convert it to an atomic spinlock first. Do that as a preparatory change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5152de7b79 upstream.
Reading stats using the SYS_COUNT_* register definitions is only used by
ocelot_get_stats64() from the ocelot switchdev driver, however,
currently the bucket definitions are incorrect.
Separately, on both RX and TX, we have the following problems:
- a 256-1023 bucket which actually tracks the 256-511 packets
- the 1024-1526 bucket actually tracks the 512-1023 packets
- the 1527-max bucket actually tracks the 1024-1526 packets
=> nobody tracks the packets from the real 1527-max bucket
Additionally, the RX_PAUSE, RX_CONTROL, RX_LONGS and RX_CLASSIFIED_DROPS
all track the wrong thing. However this doesn't seem to have any
consequence, since ocelot_get_stats64() doesn't use these.
Even though this problem only manifests itself for the switchdev driver,
we cannot split the fix for ocelot and for DSA, since it requires fixing
the bucket definitions from enum ocelot_reg, which makes us necessarily
adapt the structures from felix and seville as well.
Fixes: 84705fc165 ("net: dsa: felix: introduce support for Seville VSC9953 switch")
Fixes: 5605194877 ("net: dsa: ocelot: add driver for Felix switch family")
Fixes: a556c76adc ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b2f3212b5 upstream.
To avoid allocation of the conntrack extension area when possible,
the default behaviour was changed to only allocate the event extension
if a userspace program is subscribed to a notification group.
Problem is that while 'conntrack -E' does enable the event allocation
behind the scenes, 'conntrack -E expect' does not: no expectation events
are delivered unless user sets
"net.netfilter.nf_conntrack_events" back to 1 (always on).
Fix the autodetection to also consider EXP type group.
We need to track the 6 event groups (3+3, new/update/destroy for events and
for expectations each) independently, else we'd disable events again
if an expectation group becomes empty while there is still an active
event group.
Fixes: 2794cdb0b9 ("netfilter: nfnetlink: allow to detect if ctnetlink listeners exist")
Reported-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72691a269f upstream.
If a request is re-encoded and then retransmitted, we need to make sure
that we also re-encode the bvec, in case the page lists have changed.
Fixes: ff053dbbaf ("SUNRPC: Move the call to xprt_send_pagedata() out of xprt_sock_sendmsg()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c770f31d8f upstream.
I discovered that xdr_encode_bool() was returning the same address
that was passed in the @p parameter. The documenting comment states
that the intent is to return the address of the next buffer
location, just like the other "xdr_encode_*" helpers.
The result was the encoded results of NFSv3 PATHCONF operations were
not formed correctly.
Fixes: ded04a587f ("NFSD: Update the NFSv3 PATHCONF3res encoder to use struct xdr_stream")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2dcac2f58 upstream.
The bpf_sys_bpf() helper function allows an eBPF program to load another
eBPF program from within the kernel. In this case the argument union
bpf_attr pointer (as well as the insns and license pointers inside) is a
kernel address instead of a userspace address (which is the case of a
usual bpf() syscall). To make the memory copying process in the syscall
work in both cases, bpfptr_t was introduced to wrap around the pointer
and distinguish its origin. Specifically, when copying memory contents
from a bpfptr_t, a copy_from_user() is performed in case of a userspace
address and a memcpy() is performed for a kernel address.
This can lead to problems because the in-kernel pointer is never checked
for validity. The problem happens when an eBPF syscall program tries to
call bpf_sys_bpf() to load a program but provides a bad insns pointer --
say 0xdeadbeef -- in the bpf_attr union. The helper calls __sys_bpf()
which would then call bpf_prog_load() to load the program.
bpf_prog_load() is responsible for copying the eBPF instructions to the
newly allocated memory for the program; it creates a kernel bpfptr_t for
insns and invokes copy_from_bpfptr(). Internally, all bpfptr_t
operations are backed by the corresponding sockptr_t operations, which
performs direct memcpy() on kernel pointers for copy_from/strncpy_from
operations. Therefore, the code is always happy to dereference the bad
pointer to trigger a un-handle-able page fault and in turn an oops.
However, this is not supposed to happen because at that point the eBPF
program is already verified and should not cause a memory error.
Sample KASAN trace:
[ 25.685056][ T228] ==================================================================
[ 25.685680][ T228] BUG: KASAN: user-memory-access in copy_from_bpfptr+0x21/0x30
[ 25.686210][ T228] Read of size 80 at addr 00000000deadbeef by task poc/228
[ 25.686732][ T228]
[ 25.686893][ T228] CPU: 3 PID: 228 Comm: poc Not tainted 5.19.0-rc7 #7
[ 25.687375][ T228] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS d55cb5a 04/01/2014
[ 25.687991][ T228] Call Trace:
[ 25.688223][ T228] <TASK>
[ 25.688429][ T228] dump_stack_lvl+0x73/0x9e
[ 25.688747][ T228] print_report+0xea/0x200
[ 25.689061][ T228] ? copy_from_bpfptr+0x21/0x30
[ 25.689401][ T228] ? _printk+0x54/0x6e
[ 25.689693][ T228] ? _raw_spin_lock_irqsave+0x70/0xd0
[ 25.690071][ T228] ? copy_from_bpfptr+0x21/0x30
[ 25.690412][ T228] kasan_report+0xb5/0xe0
[ 25.690716][ T228] ? copy_from_bpfptr+0x21/0x30
[ 25.691059][ T228] kasan_check_range+0x2bd/0x2e0
[ 25.691405][ T228] ? copy_from_bpfptr+0x21/0x30
[ 25.691734][ T228] memcpy+0x25/0x60
[ 25.692000][ T228] copy_from_bpfptr+0x21/0x30
[ 25.692328][ T228] bpf_prog_load+0x604/0x9e0
[ 25.692653][ T228] ? cap_capable+0xb4/0xe0
[ 25.692956][ T228] ? security_capable+0x4f/0x70
[ 25.693324][ T228] __sys_bpf+0x3af/0x580
[ 25.693635][ T228] bpf_sys_bpf+0x45/0x240
[ 25.693937][ T228] bpf_prog_f0ec79a5a3caca46_bpf_func1+0xa2/0xbd
[ 25.694394][ T228] bpf_prog_run_pin_on_cpu+0x2f/0xb0
[ 25.694756][ T228] bpf_prog_test_run_syscall+0x146/0x1c0
[ 25.695144][ T228] bpf_prog_test_run+0x172/0x190
[ 25.695487][ T228] __sys_bpf+0x2c5/0x580
[ 25.695776][ T228] __x64_sys_bpf+0x3a/0x50
[ 25.696084][ T228] do_syscall_64+0x60/0x90
[ 25.696393][ T228] ? fpregs_assert_state_consistent+0x50/0x60
[ 25.696815][ T228] ? exit_to_user_mode_prepare+0x36/0xa0
[ 25.697202][ T228] ? syscall_exit_to_user_mode+0x20/0x40
[ 25.697586][ T228] ? do_syscall_64+0x6e/0x90
[ 25.697899][ T228] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 25.698312][ T228] RIP: 0033:0x7f6d543fb759
[ 25.698624][ T228] Code: 08 5b 89 e8 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 97 a6 0e 00 f7 d8 64 89 01 48
[ 25.699946][ T228] RSP: 002b:00007ffc3df78468 EFLAGS: 00000287 ORIG_RAX: 0000000000000141
[ 25.700526][ T228] RAX: ffffffffffffffda RBX: 00007ffc3df78628 RCX: 00007f6d543fb759
[ 25.701071][ T228] RDX: 0000000000000090 RSI: 00007ffc3df78478 RDI: 000000000000000a
[ 25.701636][ T228] RBP: 00007ffc3df78510 R08: 0000000000000000 R09: 0000000000300000
[ 25.702191][ T228] R10: 0000000000000005 R11: 0000000000000287 R12: 0000000000000000
[ 25.702736][ T228] R13: 00007ffc3df78638 R14: 000055a1584aca68 R15: 00007f6d5456a000
[ 25.703282][ T228] </TASK>
[ 25.703490][ T228] ==================================================================
[ 25.704050][ T228] Disabling lock debugging due to kernel taint
Update copy_from_bpfptr() and strncpy_from_bpfptr() so that:
- for a kernel pointer, it uses the safe copy_from_kernel_nofault() and
strncpy_from_kernel_nofault() functions.
- for a userspace pointer, it performs copy_from_user() and
strncpy_from_user().
Fixes: af2ac3e13e ("bpf: Prepare bpf syscall to be used from kernel and user space.")
Link: https://lore.kernel.org/bpf/20220727132905.45166-1-jinghao@linux.ibm.com/
Signed-off-by: Jinghao Jia <jinghao@linux.ibm.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220729201713.88688-1-jinghao@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1d41f7720 upstream.
The btf_sock_ids array needs struct mptcp_sock BTF ID for the
bpf_skc_to_mptcp_sock helper.
When CONFIG_MPTCP is disabled, the 'struct mptcp_sock' is not
defined and resolve_btfids will complain with:
[...]
BTFIDS vmlinux
WARN: resolve_btfids: unresolved symbol mptcp_sock
[...]
Add an empty definition for struct mptcp_sock when CONFIG_MPTCP
is disabled.
Fixes: 3bc253c2e6 ("bpf: Add bpf_skc_to_mptcp_sock_proto")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220802163324.1873044-1-jolsa@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 415d832497 upstream.
These operations are documented as always ordered in
include/asm-generic/bitops/instrumented-atomic.h, and producer-consumer
type use cases where one side needs to ensure a flag is left pending
after some shared data was updated rely on this ordering, even in the
failure case.
This is the case with the workqueue code, which currently suffers from a
reproducible ordering violation on Apple M1 platforms (which are
notoriously out-of-order) that ends up causing the TTY layer to fail to
deliver data to userspace properly under the right conditions. This
change fixes that bug.
Change the documentation to restrict the "no order on failure" story to
the _lock() variant (for which it makes sense), and remove the
early-exit from the generic implementation, which is what causes the
missing barrier semantics in that case. Without this, the remaining
atomic op is fully ordered (including on ARM64 LSE, as of recent
versions of the architecture spec).
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes: e986a0d6cb ("locking/atomics, asm-generic/bitops/atomic.h: Rewrite using atomic_*() APIs")
Fixes: 61e02392d3 ("locking/atomic/bitops: Document and clarify ordering semantics for failed test_and_{}_bit()")
Signed-off-by: Hector Martin <marcan@marcan.st>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c903dae894 upstream.
commit 278311e417 ("kexec, KEYS: Make use of platform keyring for
signature verify") adds platform keyring support on x86 kexec but not
arm64.
The code in bzImage64_verify_sig uses the keys on the
.builtin_trusted_keys, .machine, if configured and enabled,
.secondary_trusted_keys, also if configured, and .platform keyrings
to verify the signed kernel image as PE file.
Cc: kexec@lists.infradead.org
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Reviewed-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a2dcbaf4d upstream.
If an instance of tracing enables the same trace event as another
instance, or the top level instance, or even perf, then the va_list passed
into some tracepoints can be used more than once.
As va_list can only be traversed once, this can cause issues:
# cat /sys/kernel/tracing/instances/qla2xxx/trace
cat-56106 [012] ..... 2419873.470098: ql_dbg_log: qla2xxx [0000:05:00.0]-1054:14: Entered (null).
cat-56106 [012] ..... 2419873.470101: ql_dbg_log: qla2xxx [0000:05:00.0]-1000:14: Entered ×+<96>²Ü<98>^H.
cat-56106 [012] ..... 2419873.470102: ql_dbg_log: qla2xxx [0000:05:00.0]-1006:14: Prepare to issue mbox cmd=0xde589000.
# cat /sys/kernel/tracing/trace
cat-56106 [012] ..... 2419873.470097: ql_dbg_log: qla2xxx [0000:05:00.0]-1054:14: Entered qla2x00_get_firmware_state.
cat-56106 [012] ..... 2419873.470100: ql_dbg_log: qla2xxx [0000:05:00.0]-1000:14: Entered qla2x00_mailbox_command.
cat-56106 [012] ..... 2419873.470102: ql_dbg_log: qla2xxx [0000:05:00.0]-1006:14: Prepare to issue mbox cmd=0x69.
The instance version is corrupted because the top level instance iterated
the va_list first.
Use va_copy() in the __assign_vstr() macro to make sure that each trace
event for each use case gets a fresh va_list.
Link: https://lore.kernel.org/all/259d53a5-958e-6508-4e45-74dba2821242@marvell.com/
Link: https://lkml.kernel.org/r/20220719182004.21daa83e@gandalf.local.home
Fixes: 0563231f93 ("tracing/events: Add __vstring() and __assign_vstr() helper macros")
Reported-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38a523a294 upstream.
This reverts commit 77515ebaf0 as it
causes build problems in linux-next. It needs to be reintroduced in a
way that can allow the api to evolve and not require a "flag day" to
catch all users.
Link: https://lore.kernel.org/r/20220623160723.7a44b573@canb.auug.org.au
Cc: Duoming Zhou <duoming@zju.edu.cn>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bed4593645 ]
If DEBUG_SECTION_MISMATCH enabled, __calc_tpm2_event_size() will not be
inlined, this cause section mismatch like this:
WARNING: modpost: vmlinux.o(.text.unlikely+0xe30c): Section mismatch in reference from the variable L0 to the function .init.text:early_ioremap()
The function L0() references
the function __init early_memremap().
This is often because L0 lacks a __init
annotation or the annotation of early_ioremap is wrong.
Fix it by using __always_inline instead of inline for the called-once
function __calc_tpm2_event_size().
Fixes: 44038bc514 ("tpm: Abstract crypto agile event size calculations")
Cc: stable@vger.kernel.org # v5.3
Reported-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c3d2f9388 ]
alignof() gives an alignment of types as they would be as standalone
variables. But alignment in structures might be different, and when
building the fields of events, the alignment must be the actual
alignment otherwise the field offsets may not match what they actually
are.
This caused trace-cmd to crash, as libtraceevent did not check if the
field offset was bigger than the event. The write_msr and read_msr
events on 32 bit had their fields incorrect, because it had a u64 field
between two ints. alignof(u64) would give 8, but the u64 field was at a
4 byte alignment.
Define a macro as:
ALIGN_STRUCTFIELD(type) ((int)(offsetof(struct {char a; type b;}, b)))
which gives the actual alignment of types in a structure.
Link: https://lkml.kernel.org/r/20220731015928.7ab3a154@rorschach.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 04ae87a520 ("ftrace: Rework event_create_dir()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dd1cd3220 ]
Commit ca522482e3 ("dm: pass NULL bdev to bio_alloc_clone")
introduced the optimization to _not_ perform bio_associate_blkg()'s
relatively costly work when DM core clones its bio. But in doing so it
exposed the possibility for DM's cloned bio to alter DM target
behavior (e.g. crash) if a target were to issue IO without first
calling bio_set_dev().
The DM raid target can trigger an MD crash due to its need to split
the DM bio that is passed to md_handle_request(). The split will
recurse to submit_bio_noacct() using a bio with an uninitialized
->bi_blkg. This NULL bio->bi_blkg causes blk_throtl_bio() to
dereference a NULL blkg_to_tg(bio->bi_blkg).
Fix this in DM core by adding a new 'needs_bio_set_dev' target flag that
will make alloc_tio() call bio_set_dev() on behalf of the target.
dm-raid is the only target that requires this flag. bio_set_dev()
initializes the DM cloned bio's ->bi_blkg, using bio_associate_blkg,
before passing the bio to md_handle_request().
Long-term fix would be to audit and refactor MD code to rely on DM to
split its bio, using dm_accept_partial_bio(), but there are MD raid
personalities (e.g. raid1 and raid10) whose implementation are tightly
coupled to handling the bio splitting inline.
Fixes: ca522482e3 ("dm: pass NULL bdev to bio_alloc_clone")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f4179fcf4 ]
There is a problem with the current revision checks in
is_cppc_supported() that they essentially prevent the CPPC support
from working if a new _CPC package format revision being a proper
superset of the v3 and only causing _CPC to return a package with more
entries (while retaining the types and meaning of the entries defined by
the v3) is introduced in the future and used by the platform firmware.
In that case, as long as the number of entries in the _CPC return
package is at least CPPC_V3_NUM_ENT, it should be perfectly fine to
use the v3 support code and disregard the additional package entries
added by the new package format revision.
For this reason, drop is_cppc_supported() altogether, put the revision
checks directly into acpi_cppc_processor_probe() so they are easier to
follow and rework them to take the case mentioned above into account.
Fixes: 4773e77cdc ("ACPI / CPPC: Add support for CPPC v3")
Cc: 4.18+ <stable@vger.kernel.org> # 4.18+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
