Pull irq fixes from Ingo Molnar:
"Diverse irqchip driver fixes"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Fix command queue pointer comparison bug
irqchip/mips-gic: Use the correct local interrupt map registers
irqchip/ti-sci-inta: Fix kernel crash if irq_create_fwspec_mapping fail
irqchip/irq-csky-mpintc: Support auto irq deliver to all cpus
Pull EFI fixes from Ingo Molnar:
"Four fixes:
- fix a kexec crash on arm64
- fix a reboot crash on some Android platforms
- future-proof the code for upcoming ACPI 6.2 changes
- fix a build warning on x86"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efibc: Replace variable set function in notifier call
x86/efi: fix a -Wtype-limits compilation warning
efi/bgrt: Drop BGRT status field reserved bits check
efi/memreserve: deal with memreserve entries in unmapped memory
Avoid skipping bus-level PCI power management during system
resume for PCIe ports left in D0 during the preceding suspend
transition on platforms where the power states of those ports
can change out of the PCI layer's control.
-----BEGIN PGP SIGNATURE-----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=eGQi
-----END PGP SIGNATURE-----
Merge tag 'pm-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Avoid skipping bus-level PCI power management during system resume for
PCIe ports left in D0 during the preceding suspend transition on
platforms where the power states of those ports can change out of the
PCI layer's control"
* tag 'pm-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PCI: PM: Avoid skipping bus-level PM on platforms without ACPI
One simple fix for a driver use after free.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXRanDiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisheLdAQDqNfwa
zjLaPyTcuvDDyl5l6P1/HwP+wko3Ssan30kb/QEA+1fMxV1FqtwLADP9QVA1OMTc
1E72PEHf7oEaXmRMXfM=
=oJHK
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"One simple fix for a driver use after free"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: vmw_pscsi: Fix use-after-free in pvscsi_queue_lck()
- Fix IRQ setup in the MCP23s08.
- Fix pin setup on pins > 31 in the Ocelot driver.
- Fix IRQs in the Mediatek driver.
-----BEGIN PGP SIGNATURE-----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=/GFO
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Sorry to bomb in fixes this late. Maybe I can comfort you by saying it
is only driver fixes, and mostly IRQ handling which is something GPIO
and pin control drivers never get right. You think it works and then
it doesn't.
Summary:
- Fix IRQ setup in the MCP23s08.
- Fix pin setup on pins > 31 in the Ocelot driver.
- Fix IRQs in the Mediatek driver"
* tag 'pinctrl-v5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: mediatek: Update cur_mask in mask/mask ops
pinctrl: mediatek: Ignore interrupts that are wake only during resume
pinctrl: ocelot: fix pinmuxing for pins after 31
pinctrl: ocelot: fix gpio direction for pins after 31
pinctrl: mcp23s08: Fix add_data and irqchip_add_nested call order
- Do a DT/firmware lookup in clk_core_get() even when the DT index is a
nonsensical value
- Fix some clk data typos in the Amlogic DT headers/code
- Avoid returning junk in the TI clk driver when an invalid clk is
looked for
- Fix dividers for the emac clks on Stratix10 SoCs
- Fix default HDA rates on Tegra210 to correct distorted audio
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl0VIHcRHHNib3lkQGtl
cm5lbC5vcmcACgkQrQKIl8bklSU0Ww//XVDS0JqiWcEopLc8dLrjxn2n7W3qlbB9
8RqkrvFK/yv9Hrd1OqTSJLnrDQKb0zYnzjzU0g7Isdk81uecRQDJksjWQ/laR5i4
ut5QOwV8IBSRl6Mu4XoMHvt9apysXX9od8B6Iu1fhbgmQeKlVkX/PYuT+mcQtMjc
2Zg6ILQpkFaXhB9vQxVZwwmGZyR4/pfNCltl8A1Zg9ZkWgpOvv+7wHo/5AYNIBYM
JbynlCdOii9gNXwoXPnayNvqwKNi0NEEfzOX/RuSarwrRVKdbqbWKhKlHTRv3LwC
myo+dh/7l1l+1ANhBedzbnSa5YHSUyZXjkO+pKBctJEOGMV9+fbGEOvxt1LPBr7X
IrSevXYwPfgHdxxnoMM+S5OTWYyv9jOTTXEwIc3rAoDnAJWcLsg6V8MEGL/CGQ7T
yrSRARGCowU73rJXwfTayMKSqQgaTGmB00x4lewQK29DA0uMunQTzRU7qjOAe919
ECgdYV6WJcRCThrAfknARD/FS+J07fMqyLD9IFd2bFQuGWCq8EFT7Ky2t89bXULG
SMvLUe9CUpURtfdrDjz8h+VzmAStoAWck63EffgymPILRhRI4xY+Mr/YyfQ07rMu
BTSsj9wd8AywhmOgi42TVOFZS39bDCAytJ9LMaxDyNXsDVi/REC3O43z9kyHoUQB
JIyQyHFSRD0=
=3QYB
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of clk driver fixes and one core framework fix
- Do a DT/firmware lookup in clk_core_get() even when the DT index is
a nonsensical value
- Fix some clk data typos in the Amlogic DT headers/code
- Avoid returning junk in the TI clk driver when an invalid clk is
looked for
- Fix dividers for the emac clks on Stratix10 SoCs
- Fix default HDA rates on Tegra210 to correct distorted audio"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: socfpga: stratix10: fix divider entry for the emac clocks
clk: Do a DT parent lookup even when index < 0
clk: tegra210: Fix default rates for HDA clocks
clk: ti: clkctrl: Fix returning uninitialized data
clk: meson: meson8b: fix a typo in the VPU parent names array variable
clk: meson: fix MPLL 50M binding id typo
init code.
- Fix DM log-writes target's handling of super block sectors so updates
are made in order through use of completion.
- Fix DM core's argument splitting code to avoid undefined behaviour
reported as a side-effect of UBSAN analysis on ppc64le.
- Fix DM verity target to limit the amount of error messages that can
result from a corrupt block being found.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl0VBp4THHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWlLKB/9wnB1FWhVIwt5j0e3YpqToThptT22N
sWO/vBKtIR8nbbohXeam7mgh15+D61SpY+8jdkgAlIQonPzCwFrgSWdtpbbveYw6
gFWAdd013R+piGX40l0EztwAQ9IawwFl7JP+fBevxFQdGAVT6SpaJfBWH0XcIBbb
udEtoeW0dVp06SFsokGq6TPSRCdxwMh9JpRplgtLmz0yhfsWeFivjw2AMIen5QqB
Z0zcJnL8UMRdJq0EEqjQ3z9CH/Th8Nryxibo8YLnADPBfv7RyR2+wCjrbode8LAj
LZHjHikxzt39F9PpJIPvVuvNMzrBdQPDF61O5MK7dOMl49GfIoz2ybvH
=oEWd
-----END PGP SIGNATURE-----
Merge tag 'for-5.2/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix incorrect uses of kstrndup and DM logging macros in DM's early
init code.
- Fix DM log-writes target's handling of super block sectors so updates
are made in order through use of completion.
- Fix DM core's argument splitting code to avoid undefined behaviour
reported as a side-effect of UBSAN analysis on ppc64le.
- Fix DM verity target to limit the amount of error messages that can
result from a corrupt block being found.
* tag 'for-5.2/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm verity: use message limit for data block corruption message
dm table: don't copy from a NULL pointer in realloc_argv()
dm log writes: make sure super sector log updates are written in order
dm init: remove trailing newline from calls to DMERR() and DMINFO()
dm init: fix incorrect uses of kstrndup()
Pull HID fixes from Jiri Kosina:
- fix for one corner case in HID++ protocol with respect to handling
very long reports, from Hans de Goede
- power management fix in Intel-ISH driver, from Hyungwoo Yang
- use-after-free fix in Intel-ISH driver, from Dan Carpenter
- a couple of new device IDs/quirks from Kai-Heng Feng, Kyle Godbey and
Oleksandr Natalenko
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: intel-ish-hid: fix wrong driver_data usage
HID: multitouch: Add pointstick support for ALPS Touchpad
HID: logitech-dj: Fix forwarding of very long HID++ reports
HID: uclogic: Add support for Huion HS64 tablet
HID: chicony: add another quirk for PixArt mouse
HID: intel-ish-hid: Fix a use after free in load_fw_from_host()
Pull networking fixes from David Miller:
1) Fix ppp_mppe crypto soft dependencies, from Takashi Iawi.
2) Fix TX completion to be finite, from Sergej Benilov.
3) Use register_pernet_device to avoid a dst leak in tipc, from Xin
Long.
4) Double free of TX cleanup in Dirk van der Merwe.
5) Memory leak in packet_set_ring(), from Eric Dumazet.
6) Out of bounds read in qmi_wwan, from Bjørn Mork.
7) Fix iif used in mcast/bcast looped back packets, from Stephen
Suryaputra.
8) Fix neighbour resolution on raw ipv6 sockets, from Nicolas Dichtel.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (25 commits)
af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET
sctp: change to hold sk after auth shkey is created successfully
ipv6: fix neighbour resolution with raw socket
ipv6: constify rt6_nexthop()
net: dsa: microchip: Use gpiod_set_value_cansleep()
net: aquantia: fix vlans not working over bridged network
ipv4: reset rt_iif for recirculated mcast/bcast out pkts
team: Always enable vlan tx offload
net/smc: Fix error path in smc_init
net/smc: hold conns_lock before calling smc_lgr_register_conn()
bonding: Always enable vlan tx offload
net/ipv6: Fix misuse of proc_dointvec "skip_notify_on_dev_down"
ipv4: Use return value of inet_iif() for __raw_v4_lookup in the while loop
qmi_wwan: Fix out-of-bounds read
tipc: check msg->req data len in tipc_nl_compat_bearer_disable
net: macb: do not copy the mac address if NULL
net/packet: fix memory leak in packet_set_ring()
net/tls: fix page double free on TX cleanup
net/sched: cbs: Fix error path of cbs_module_init
tipc: change to use register_pernet_device
...
During suspend/resume, mtk_eint_mask may be called while
wake_mask is active. For example, this happens if a wake-source
with an active interrupt handler wakes the system:
irq/pm.c:irq_pm_check_wakeup would disable the interrupt, so
that it can be handled later on in the resume flow.
However, this may happen before mtk_eint_do_resume is called:
in this case, wake_mask is loaded, and cur_mask is restored
from an older copy, re-enabling the interrupt, and causing
an interrupt storm (especially for level interrupts).
Step by step, for a line that has both wake and interrupt enabled:
1. cur_mask[irq] = 1; wake_mask[irq] = 1; EINT_EN[irq] = 1 (interrupt
enabled at hardware level)
2. System suspends, resumes due to that line (at this stage EINT_EN
== wake_mask)
3. irq_pm_check_wakeup is called, and disables the interrupt =>
EINT_EN[irq] = 0, but we still have cur_mask[irq] = 1
4. mtk_eint_do_resume is called, and restores EINT_EN = cur_mask, so
it reenables EINT_EN[irq] = 1 => interrupt storm as the driver
is not yet ready to handle the interrupt.
This patch fixes the issue in step 3, by recording all mask/unmask
changes in cur_mask. This also avoids the need to read the current
mask in eint_do_suspend, and we can remove mtk_eint_chip_read_mask
function.
The interrupt will be re-enabled properly later on, sometimes after
mtk_eint_do_resume, when the driver is ready to handle it.
Fixes: 58a5e1b64b ("pinctrl: mediatek: Implement wake handler and suspend resume")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Sean Wang <sean.wang@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There are platforms that do not call pm_set_suspend_via_firmware(),
so pm_suspend_via_firmware() returns 'false' on them, but the power
states of PCI devices (PCIe ports in particular) are changed as a
result of powering down core platform components during system-wide
suspend. Thus the pm_suspend_via_firmware() checks in
pci_pm_suspend_noirq() and pci_pm_resume_noirq() introduced by
commit 3e26c5feed ("PCI: PM: Skip devices in D0 for suspend-to-
idle") are not sufficient to determine that devices left in D0
during suspend will remain in D0 during resume and so the bus-level
power management can be skipped for them.
For this reason, introduce a new global suspend flag,
PM_SUSPEND_FLAG_NO_PLATFORM, set it for suspend-to-idle only
and replace the pm_suspend_via_firmware() checks mentioned above
with checks against this flag.
Fixes: 3e26c5feed ("PCI: PM: Skip devices in D0 for suspend-to-idle")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
There is no functional change in this patch, it only prepares the next one.
rt6_nexthop() will be used by ip6_dst_lookup_neigh(), which uses const
variables.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace gpiod_set_value() with gpiod_set_value_cansleep(), as the switch
reset GPIO can be connected to e.g. I2C GPIO expander and it is perfectly
fine for the kernel to sleep for a bit in ksz_switch_register().
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Woojung Huh <Woojung.Huh@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In configuration of vlan over bridge over aquantia device
it was found that vlan tagged traffic is dropped on chip.
The reason is that bridge device enables promisc mode,
but in atlantic chip vlan filters will still apply.
So we have to corellate promisc settings with vlan configuration.
The solution is to track in a separate state variable the
need of vlan forced promisc. And also consider generic
promisc configuration when doing vlan filter config.
Fixes: 7975d2aff5 ("net: aquantia: add support of rx-vlan-filter offload")
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We should rather have vlan_tci filled all the way down
to the transmitting netdevice and let it do the hw/sw
vlan implementation.
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We build vlan on top of bonding interface, which vlan offload
is off, bond mode is 802.3ad (LACP) and xmit_hash_policy is
BOND_XMIT_POLICY_ENCAP34.
Because vlan tx offload is off, vlan tci is cleared and skb push
the vlan header in validate_xmit_vlan() while sending from vlan
devices. Then in bond_xmit_hash, __skb_flow_dissect() fails to
get information from protocol headers encapsulated within vlan,
because 'nhoff' is points to IP header, so bond hashing is based
on layer 2 info, which fails to distribute packets across slaves.
This patch always enable bonding's vlan tx offload, pass the vlan
packets to the slave devices with vlan tci, let them to handle
vlan implementation.
Fixes: 278339a42a ("bonding: propogate vlan_features to bonding master")
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before suspending, mtk-eint would set the interrupt mask to the
one in wake_mask. However, some of these interrupts may not have a
corresponding interrupt handler, or the interrupt may be disabled.
On resume, the eint irq handler would trigger nevertheless,
and irq/pm.c:irq_pm_check_wakeup would be called, which would
try to call irq_disable. However, if the interrupt is not enabled
(irqd_irq_disabled(&desc->irq_data) is true), the call does nothing,
and the interrupt is left enabled in the eint driver.
Especially for level-sensitive interrupts, this will lead to an
interrupt storm on resume.
If we detect that an interrupt is only in wake_mask, but not in
cur_mask, we can just mask it out immediately (as mtk_eint_resume
would do anyway at a later stage in the resume sequence, when
restoring cur_mask).
Fixes: bf22ff45be ("genirq: Avoid unnecessary low level irq function calls")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Sean Wang <sean.wang@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Currently, in suspend() and resume(), ishtp client drivers are using
driver_data to get "struct ishtp_cl_device" object which is set by
bus driver. It's wrong since the driver_data should not be owned bus.
driver_data should be owned by the corresponding ishtp client driver.
Due to this, some ishtp client driver like cros_ec_ishtp which uses
its driver_data to transfer its data to its child doesn't work correctly.
So this patch removes setting driver_data in bus drier and instead of
using driver_data to get "struct ishtp_cl_device", since "struct device"
is embedded in "struct ishtp_cl_device", we introduce a helper function
that returns "struct ishtp_cl_device" from "struct device".
Signed-off-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There's a new ALPS touchpad/pointstick combo device that requires
MT_CLS_WIN_8_DUAL to make its pointsitck work as a mouse.
The device can be found on HP ZBook 17 G5.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The HID++ spec also defines very long HID++ reports, with a reportid of
0x12. The MX5000 and MX5500 keyboards use 0x12 output reports for sending
messages to display on their buildin LCD.
Userspace (libmx5000) supports this, in order for this to work when talking
to the HID devices instantiated for the keyboard by hid-logitech-dj,
we need to properly forward these reports to the device.
This commit fixes logi_dj_ll_raw_request not forwarding these reports.
Fixes: f2113c3020 ("HID: logitech-dj: add support for Logitech Bluetooth Mini-Receiver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
I've spotted another Chicony PixArt mouse in the wild, which requires
HID_QUIRK_ALWAYS_POLL quirk, otherwise it disconnects each minute.
USB ID of this device is 0x04f2:0x0939.
We've introduced quirks like this for other models before, so lets add
this mouse too.
Link: https://github.com/sriemer/fix-linux-mouse#usb-mouse-disconnectsreconnects-every-minute-on-linux
Signed-off-by: Oleksandr Natalenko <oleksandr@redhat.com>
Acked-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We have to print the filename first before we can kfree it.
Fixes: 91b228107d ("HID: intel-ish-hid: ISH firmware loader client driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The fixed dividers for the emac clocks should be 2 not 4.
Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
DM verity should also use DMERR_LIMIT to limit repeat data block
corruption messages.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
For the first call to realloc_argv() in dm_split_args(), old_argv is
NULL and size is zero. Then memcpy is called, with the NULL old_argv
as the source argument and a zero size argument. AFAIK, this is
undefined behavior and generates the following warning when compiled
with UBSAN on ppc64le:
In file included from ./arch/powerpc/include/asm/paca.h:19,
from ./arch/powerpc/include/asm/current.h:16,
from ./include/linux/sched.h:12,
from ./include/linux/kthread.h:6,
from drivers/md/dm-core.h:12,
from drivers/md/dm-table.c:8:
In function 'memcpy',
inlined from 'realloc_argv' at drivers/md/dm-table.c:565:3,
inlined from 'dm_split_args' at drivers/md/dm-table.c:588:9:
./include/linux/string.h:345:9: error: argument 2 null where non-null expected [-Werror=nonnull]
return __builtin_memcpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/md/dm-table.c: In function 'dm_split_args':
./include/linux/string.h:345:9: note: in a call to built-in function '__builtin_memcpy'
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Currently, although we submit super bios in order (and super.nr_entries
is incremented by each logged entry), submit_bio() is async so each
super sector may not be written to log device in order and then the
final nr_entries may be smaller than it should be.
This problem can be reproduced by the xfstests generic/455 with ext4:
QA output created by 455
-Silence is golden
+mark 'end' does not exist
Fix this by serializing submission of super sectors to make sure each
is written to the log disk in order.
Fixes: 0e9cebe724 ("dm: add log writes target")
Cc: stable@vger.kernel.org
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
These printing macros already add a trailing newline, so having another
one here just makes for blank lines when these prints are enabled.
Remove these needless newlines.
Fixes: 6bbc923dfc ("dm: add support to directly boot to a mapped device")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fix 2 kstrndup() calls with incorrect argument order.
Fixes: 6bbc923dfc ("dm: add support to directly boot to a mapped device")
Cc: stable@vger.kernel.org # v5.1
Signed-off-by: Gen Zhang <blackgod016574@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The actual layout for OCELOT_GPIO_ALT[01] when there are more than 32 pins
is interleaved, i.e. OCELOT_GPIO_ALT0[0], OCELOT_GPIO_ALT1[0],
OCELOT_GPIO_ALT0[1], OCELOT_GPIO_ALT1[1]. Introduce a new REG_ALT macro to
facilitate the register offset calculation and use it where necessary.
Fixes: da801ab56a pinctrl: ocelot: add MSCC Jaguar2 support
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The third argument passed to REG is not the correct one and
ocelot_gpio_set_direction is not working for pins after 31. Fix that by
passing the pin number instead of the modulo 32 value.
Fixes: da801ab56a pinctrl: ocelot: add MSCC Jaguar2 support
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Currently probing of the mcp23s08 results in an error message
"detected irqchip that is shared with multiple gpiochips:
please fix the driver"
This is due to the following:
Call to mcp23s08_irqchip_setup() with call hierarchy:
mcp23s08_irqchip_setup()
gpiochip_irqchip_add_nested()
gpiochip_irqchip_add_key()
gpiochip_set_irq_hooks()
Call to devm_gpiochip_add_data() with call hierarchy:
devm_gpiochip_add_data()
gpiochip_add_data_with_key()
gpiochip_add_irqchip()
gpiochip_set_irq_hooks()
The gpiochip_add_irqchip() returns immediately if there isn't a irqchip
but we added a irqchip due to the previous mcp23s08_irqchip_setup()
call. So it calls gpiochip_set_irq_hooks() a second time.
Fix this by moving the call to devm_gpiochip_add_data before
the call to mcp23s08_irqchip_setup
Fixes: 02e389e63e ("pinctrl: mcp23s08: fix irq setup order")
Suggested-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Resize variable to avoid uninitialised (MSB) data; stmfx
- Fixe endian bug; stmfx
-----BEGIN PGP SIGNATURE-----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=CZt7
-----END PGP SIGNATURE-----
Merge tag 'mfd-fixes-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd bugfix from Lee Jones.
Fix stmfx type confusion between regmap_read() (which takes an "u32")
and the bitmap operations (which take an "unsigned long" array).
* tag 'mfd-fixes-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: stmfx: Fix an endian bug in stmfx_irq_handler()
mfd: stmfx: Uninitialized variable in stmfx_irq_handler()
The syzbot reported
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xca/0x13e lib/dump_stack.c:113
print_address_description+0x67/0x231 mm/kasan/report.c:188
__kasan_report.cold+0x1a/0x32 mm/kasan/report.c:317
kasan_report+0xe/0x20 mm/kasan/common.c:614
qmi_wwan_probe+0x342/0x360 drivers/net/usb/qmi_wwan.c:1417
usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
really_probe+0x281/0x660 drivers/base/dd.c:509
driver_probe_device+0x104/0x210 drivers/base/dd.c:670
__device_attach_driver+0x1c2/0x220 drivers/base/dd.c:777
bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
Caused by too many confusing indirections and casts.
id->driver_info is a pointer stored in a long. We want the
pointer here, not the address of it.
Thanks-to: Hillf Danton <hdanton@sina.com>
Reported-by: syzbot+b68605d7fadd21510de1@syzkaller.appspotmail.com
Cc: Kristian Evensen <kristian.evensen@gmail.com>
Fixes: e4bf63482c ("qmi_wwan: Add quirk for Quectel dynamic config")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the MAC address setup in the probe. The MAC address
retrieved using of_get_mac_address was checked for not containing an
error, but it may also be NULL which wasn't tested. Fix it by replacing
IS_ERR with IS_ERR_OR_NULL.
Fixes: 541ddc66d6 ("net: macb: support of_get_mac_address new ERR_PTR error")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's not okay to cast a "u32 *" to "unsigned long *" when you are
doing a for_each_set_bit() loop because that will break on big
endian systems.
Fixes: 386145601b82 ("mfd: stmfx: Uninitialized variable in stmfx_irq_handler()")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
- Fix a bug uncovered by a recent patch on Spansion SPI-NOR flashes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAl0Pwk0ACgkQJWrqGEe9
VoS8nwf7B76jN39/g32Hfp4JT/B7cntrHzTGxfUT9NAhKa4MaI7FOU2eeTryaVdO
32OJlttV+r0Fu6p+In1VXCk4j1YlkcOaxqB1VXsMEaQ+Vt8ONVTbJX/cqyGC/ogq
MZlO8Rys4MGmq7vRiZ+1SD8lOV4qXgmX3D38NjUQ1oCAMCCgJgkWYFV2tv9Eie09
2CCT3IBFj+D34qaBiM+qocGtnzWfB9477A6ZeI4BwjUe1ZtoEYeIOrCXWiywabjM
msHRN1tNt5kfINnx0TkQFcnpbdDo5tMyTHCkEQt5Ewdae4vyCv7xTHTCZEttC7Ic
Rx2yONzrZGQVP4c27y22K954C1jGcg==
=ZiPm
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
- Set the raw NAND number of targets to the right value
- Fix a bug uncovered by a recent patch on Spansion SPI-NOR flashes
* tag 'mtd/fixes-for-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spi-nor: use 16-bit WRR command when QE is set on spansion flashes
mtd: rawnand: initialize ntargets with maxchips
- Convert to use vm_map_pages_zero()
From Souptick Joarder
-----BEGIN PGP SIGNATURE-----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=4G/o
-----END PGP SIGNATURE-----
Merge tag 'auxdisplay-for-linus-v5.2-rc7' of git://github.com/ojeda/linux
Pull auxdisplay cleanup from Miguel Ojeda:
"A cleanup for two drivers in auxdisplay: convert them to use
vm_map_pages_zero() (Souptick Joarder)"
* tag 'auxdisplay-for-linus-v5.2-rc7' of git://github.com/ojeda/linux:
auxdisplay/ht16k33.c: Convert to use vm_map_pages_zero()
auxdisplay/cfag12864bfb.c: Convert to use vm_map_pages_zero()
Since commit 605ad7f184 "tcp: refine TSO autosizing",
outbound throughput is dramatically reduced for some connections, as sis900
is doing TX completion within idle states only.
Make TX completion happen after every transmitted packet.
Test:
netperf
before patch:
> netperf -H remote -l -2000000 -- -s 1000000
MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 327680 327680 253.44 0.06
after patch:
> netperf -H remote -l -10000000 -- -s 1000000
MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 327680 327680 5.38 14.89
Thx to Dave Miller and Eric Dumazet for helpful hints
Signed-off-by: Sergej Benilov <sergej.benilov@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When transmitting certain PTP frames, e.g. SYNC and DELAY_REQ, the
PTP daemon, e.g. ptp4l, is polling the driver for the frame transmit
hardware timestamp. The polling will most likely timeout if the tx
coalesce is enabled due to the Interrupt-on-Completion (IC) bit is
not set in tx descriptor for those frames.
This patch will ignore the tx coalesce parameter and set the IC bit
when transmitting PTP frames which need to report out the frame
transmit hardware timestamp to user space.
Fixes: f748be531d ("net: stmmac: Rework coalesce timer and fix multi-queue races")
Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When ADDSUB bit is set, the system time seconds field is calculated as
the complement of the seconds part of the update value.
For example, if 3.000000001 seconds need to be subtracted from the
system time, this field is calculated as
2^32 - 3 = 4294967296 - 3 = 0x100000000 - 3 = 0xFFFFFFFD
Previously, the 0x100000000 is mistakenly written as 100000000.
This is further simplified from
sec = (0x100000000ULL - sec);
to
sec = -sec;
Fixes: ba1ffd74df ("stmmac: fix PTP support for GMAC4")
Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Revert a commit from the previous pile of fixes which causes
new lockdep splats. It is better to revert it for now and work
on a better and more well tested fix.
-----BEGIN PGP SIGNATURE-----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=JRtp
-----END PGP SIGNATURE-----
Merge tag 'iommu-fix-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fix from Joerg Roedel:
"Revert a commit from the previous pile of fixes which causes new
lockdep splats. It is better to revert it for now and work on a better
and more well tested fix"
* tag 'iommu-fix-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
Revert "iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock"
This reverts commit 7560cc3ca7.
With 5.2.0-rc5 I can easily trigger this with lockdep and iommu=pt:
======================================================
WARNING: possible circular locking dependency detected
5.2.0-rc5 #78 Not tainted
------------------------------------------------------
swapper/0/1 is trying to acquire lock:
00000000ea2b3beb (&(&iommu->lock)->rlock){+.+.}, at: domain_context_mapping_one+0xa5/0x4e0
but task is already holding lock:
00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (device_domain_lock){....}:
_raw_spin_lock_irqsave+0x3c/0x50
dmar_insert_one_dev_info+0xbb/0x510
domain_add_dev_info+0x50/0x90
dev_prepare_static_identity_mapping+0x30/0x68
intel_iommu_init+0xddd/0x1422
pci_iommu_init+0x16/0x3f
do_one_initcall+0x5d/0x2b4
kernel_init_freeable+0x218/0x2c1
kernel_init+0xa/0x100
ret_from_fork+0x3a/0x50
-> #0 (&(&iommu->lock)->rlock){+.+.}:
lock_acquire+0x9e/0x170
_raw_spin_lock+0x25/0x30
domain_context_mapping_one+0xa5/0x4e0
pci_for_each_dma_alias+0x30/0x140
dmar_insert_one_dev_info+0x3b2/0x510
domain_add_dev_info+0x50/0x90
dev_prepare_static_identity_mapping+0x30/0x68
intel_iommu_init+0xddd/0x1422
pci_iommu_init+0x16/0x3f
do_one_initcall+0x5d/0x2b4
kernel_init_freeable+0x218/0x2c1
kernel_init+0xa/0x100
ret_from_fork+0x3a/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(device_domain_lock);
lock(&(&iommu->lock)->rlock);
lock(device_domain_lock);
lock(&(&iommu->lock)->rlock);
*** DEADLOCK ***
2 locks held by swapper/0/1:
#0: 00000000033eb13d (dmar_global_lock){++++}, at: intel_iommu_init+0x1e0/0x1422
#1: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0
stack backtrace:
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc5 #78
Hardware name: LENOVO 20KGS35G01/20KGS35G01, BIOS N23ET50W (1.25 ) 06/25/2018
Call Trace:
dump_stack+0x85/0xc0
print_circular_bug.cold.57+0x15c/0x195
__lock_acquire+0x152a/0x1710
lock_acquire+0x9e/0x170
? domain_context_mapping_one+0xa5/0x4e0
_raw_spin_lock+0x25/0x30
? domain_context_mapping_one+0xa5/0x4e0
domain_context_mapping_one+0xa5/0x4e0
? domain_context_mapping_one+0x4e0/0x4e0
pci_for_each_dma_alias+0x30/0x140
dmar_insert_one_dev_info+0x3b2/0x510
domain_add_dev_info+0x50/0x90
dev_prepare_static_identity_mapping+0x30/0x68
intel_iommu_init+0xddd/0x1422
? printk+0x58/0x6f
? lockdep_hardirqs_on+0xf0/0x180
? do_early_param+0x8e/0x8e
? e820__memblock_setup+0x63/0x63
pci_iommu_init+0x16/0x3f
do_one_initcall+0x5d/0x2b4
? do_early_param+0x8e/0x8e
? rcu_read_lock_sched_held+0x55/0x60
? do_early_param+0x8e/0x8e
kernel_init_freeable+0x218/0x2c1
? rest_init+0x230/0x230
kernel_init+0xa/0x100
ret_from_fork+0x3a/0x50
domain_context_mapping_one() is taking device_domain_lock first then
iommu lock, while dmar_insert_one_dev_info() is doing the reverse.
That should be introduced by commit:
7560cc3ca7 ("iommu/vt-d: Fix lock inversion between iommu->lock and
device_domain_lock", 2019-05-27)
So far I still cannot figure out how the previous deadlock was
triggered (I cannot find iommu lock taken before calling of
iommu_flush_dev_iotlb()), however I'm pretty sure that that change
should be incomplete at least because it does not fix all the places
so we're still taking the locks in different orders, while reverting
that commit is very clean to me so far that we should always take
device_domain_lock first then the iommu lock.
We can continue to try to find the real culprit mentioned in
7560cc3ca7, but for now I think we should revert it to fix current
breakage.
CC: Joerg Roedel <joro@8bytes.org>
CC: Lu Baolu <baolu.lu@linux.intel.com>
CC: dave.jiang@intel.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
-----BEGIN PGP SIGNATURE-----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=0Qnd
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"If an IOMMU is present, ignore the P2PDMA whitelist we added for v5.2
because we don't yet know how to support P2PDMA in that case (Logan
Gunthorpe)"
* tag 'pci-v5.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/P2PDMA: Ignore root complex whitelist when an IOMMU is present
Three driver fixes (and one version number update): a suspend hang in
ufs, a qla hard lock on module removal and a qedi panic during
discovery.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXQ5HJiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYoMAQDmq1hE
rnBYcnQHdLWztkg7taCqnFdvjUocQES3+tuuVQEA+OOSqD7cz6ZKX5crZdSJm0Ka
BqeTaOMoZXUFkQ4NA9c=
=Vr0g
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three driver fixes (and one version number update): a suspend hang in
ufs, a qla hard lock on module removal and a qedi panic during
discovery"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix hardlockup in abort command during driver remove
scsi: ufs: Avoid runtime suspend possibly being blocked forever
scsi: qedi: update driver version to 8.37.0.20
scsi: qedi: Check targetname while finding boot target information
The arc4 crypto is mandatory at ppp_mppe probe time, so let's put a
softdep line, so that the corresponding module gets prepared
gracefully. Without this, a simple inclusion to initrd via dracut
failed due to the missing dependency, for example.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Certain cards in conjunction with certain switches need a little more
time for link setup that results in ethtool link test failure after
offline test. Patch adds a loop that waits for a link setup finish.
Changes in v2:
- added fixes header
Fixes: 4276e47e2d ("be2net: Add link test to list of ethtool self tests.")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the variable set function from "efivar_entry_set" to
"efivar_entry_set_safe" in efibc panic notifier.
In safe function parameter "block" will set to false
and will call "efivar_entry_set_nonblocking"to set efi variables.
efivar_entry_set_nonblocking is guaranteed to
not block and is suitable for calling from crash/panic handlers.
In UEFI android platform, when warm reset happens,
with this change, efibc will not block the reboot process.
Otherwise, set variable will call queue work and send to other offlined
cpus then cause another panic, finally will cause reboot failure.
Signed-off-by: Tian Baofeng <baofeng.tian@intel.com>
Signed-off-by: Luo XinanX <xinanx.luo@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Pull networking fixes from David Miller:
1) Fix leak of unqueued fragments in ipv6 nf_defrag, from Guillaume
Nault.
2) Don't access the DDM interface unless the transceiver implements it
in bnx2x, from Mauro S. M. Rodrigues.
3) Don't double fetch 'len' from userspace in sock_getsockopt(), from
JingYi Hou.
4) Sign extension overflow in lio_core, from Colin Ian King.
5) Various netem bug fixes wrt. corrupted packets from Jakub Kicinski.
6) Fix epollout hang in hvsock, from Sunil Muthuswamy.
7) Fix regression in default fib6_type, from David Ahern.
8) Handle memory limits in tcp_fragment more appropriately, from Eric
Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits)
tcp: refine memory limit test in tcp_fragment()
inet: clear num_timeout reqsk_alloc()
net: mvpp2: debugfs: Add pmap to fs dump
ipv6: Default fib6_type to RTN_UNICAST when not set
net: hns3: Fix inconsistent indenting
net/af_iucv: always register net_device notifier
net/af_iucv: build proper skbs for HiperTransport
net/af_iucv: remove GFP_DMA restriction for HiperTransport
net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge()
hvsock: fix epollout hang from race condition
net/udp_gso: Allow TX timestamp with UDP GSO
net: netem: fix use after free and double free with packet corruption
net: netem: fix backlog accounting for corrupted GSO frames
net: lio_core: fix potential sign-extension overflow on large shift
tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb
ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL
ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL
tun: wake up waitqueues after IFF_UP is set
net: remove duplicate fetch in sock_getsockopt
tipc: fix issues with early FAILOVER_MSG from peer
...
