mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-10-09 18:15:49 +00:00
14,187 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Peter Zijlstra
|
fa17a800ac |
mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush
commit |
||
David Hildenbrand
|
945afc5b16 |
mm/page_alloc.c: fix uninitialized memmaps on a partially populated last section
commit |
||
Yang Shi
|
9c34f7501c |
mm: move_pages: report the number of non-attempted pages
commit |
||
Wei Yang
|
768a683829 |
mm: thp: don't need care deferred split queue in memcg charge move path
commit |
||
Dan Williams
|
4e92eed639 |
mm/memory_hotplug: fix remove_memory() lockdep splat
commit |
||
|
Wei Yang
|
cb3f6faf5e |
mm/migrate.c: also overwrite error when it is bigger than zero
commit |
||
Pingfan Liu
|
d9bcf068b4 |
mm/sparse.c: reset section's mem_map when fully deactivated
commit |
||
Theodore Ts'o
|
1a00fb2d1c |
memcg: fix a crash in wb_workfn when a device disappears
commit
|
||
Dan Carpenter
|
bc92426ff6 |
mm/mempolicy.c: fix out of bounds write in mpol_parse_str()
commit |
||
Adrian Huang
|
2fe20210fc |
mm: memcg/slab: call flush_memcg_workqueue() only if memcg workqueue is valid
When booting with amd_iommu=off, the following WARNING message
appears:
AMD-Vi: AMD IOMMU disabled on kernel command-line
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/workqueue.c:2772 flush_workqueue+0x42e/0x450
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.5.0-rc3-amd-iommu #6
Hardware name: Lenovo ThinkSystem SR655-2S/7D2WRCZ000, BIOS D8E101L-1.00 12/05/2019
RIP: 0010:flush_workqueue+0x42e/0x450
Code: ff 0f 0b e9 7a fd ff ff 4d 89 ef e9 33 fe ff ff 0f 0b e9 7f fd ff ff 0f 0b e9 bc fd ff ff 0f 0b e9 a8 fd ff ff e8 52 2c fe ff <0f> 0b 31 d2 48 c7 c6 e0 88 c5 95 48 c7 c7 d8 ad f0 95 e8 19 f5 04
Call Trace:
kmem_cache_destroy+0x69/0x260
iommu_go_to_state+0x40c/0x5ab
amd_iommu_prepare+0x16/0x2a
irq_remapping_prepare+0x36/0x5f
enable_IR_x2apic+0x21/0x172
default_setup_apic_routing+0x12/0x6f
apic_intr_mode_init+0x1a1/0x1f1
x86_late_time_init+0x17/0x1c
start_kernel+0x480/0x53f
secondary_startup_64+0xb6/0xc0
---[ end trace 30894107c3749449 ]---
x2apic: IRQ remapping doesn't support X2APIC mode
x2apic disabled
The warning is caused by the calling of 'kmem_cache_destroy()'
in free_iommu_resources(). Here is the call path:
free_iommu_resources
kmem_cache_destroy
flush_memcg_workqueue
flush_workqueue
The root cause is that the IOMMU subsystem runs before the workqueue
subsystem, which the variable 'wq_online' is still 'false'. This leads
to the statement 'if (WARN_ON(!wq_online))' in flush_workqueue() is
'true'.
Since the variable 'memcg_kmem_cache_wq' is not allocated during the
time, it is unnecessary to call flush_memcg_workqueue(). This prevents
the WARNING message triggered by flush_workqueue().
Link: http://lkml.kernel.org/r/20200103085503.1665-1-ahuang12@lenovo.com
Fixes:
|
||
Wen Yang
|
0a5d1a7f64 |
mm/page-writeback.c: improve arithmetic divisions
Use div64_ul() instead of do_div() if the divisor is unsigned long, to avoid truncation to 32-bit on 64-bit platforms. Link: http://lkml.kernel.org/r/20200102081442.8273-4-wenyang@linux.alibaba.com Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Qian Cai <cai@lca.pw> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Wen Yang
|
d3ac946ec9 |
mm/page-writeback.c: use div64_ul() for u64-by-unsigned-long divide
The two variables 'numerator' and 'denominator', though they are declared as long, they should actually be unsigned long (according to the implementation of the fprop_fraction_percpu() function) And do_div() does a 64-by-32 division, while the divisor 'denominator' is unsigned long, thus 64-bit on 64-bit platforms. Hence the proper function to call is div64_ul(). Link: http://lkml.kernel.org/r/20200102081442.8273-3-wenyang@linux.alibaba.com Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Qian Cai <cai@lca.pw> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Wen Yang
|
6d9e8c651d |
mm/page-writeback.c: avoid potential division by zero in wb_min_max_ratio()
Patch series "use div64_ul() instead of div_u64() if the divisor is unsigned long". We were first inspired by commit |
||
Vlastimil Babka
|
8e57f8acbb |
mm, debug_pagealloc: don't rely on static keys too early
Commit |
||
Roman Gushchin
|
4a87e2a25d |
mm: memcg/slab: fix percpu slab vmstats flushing
Currently slab percpu vmstats are flushed twice: during the memcg
offlining and just before freeing the memcg structure. Each time percpu
counters are summed, added to the atomic counterparts and propagated up
by the cgroup tree.
The second flushing is required due to how recursive vmstats are
implemented: counters are batched in percpu variables on a local level,
and once a percpu value is crossing some predefined threshold, it spills
over to atomic values on the local and each ascendant levels. It means
that without flushing some numbers cached in percpu variables will be
dropped on floor each time a cgroup is destroyed. And with uptime the
error on upper levels might become noticeable.
The first flushing aims to make counters on ancestor levels more
precise. Dying cgroups may resume in the dying state for a long time.
After kmem_cache reparenting which is performed during the offlining
slab counters of the dying cgroup don't have any chances to be updated,
because any slab operations will be performed on the parent level. It
means that the inaccuracy caused by percpu batching will not decrease up
to the final destruction of the cgroup. By the original idea flushing
slab counters during the offlining should minimize the visible
inaccuracy of slab counters on the parent level.
The problem is that percpu counters are not zeroed after the first
flushing. So every cached percpu value is summed twice. It creates a
small error (up to 32 pages per cpu, but usually less) which accumulates
on parent cgroup level. After creating and destroying of thousands of
child cgroups, slab counter on parent level can be way off the real
value.
For now, let's just stop flushing slab counters on memcg offlining. It
can't be done correctly without scheduling a work on each cpu: reading
and zeroing it during css offlining can race with an asynchronous
update, which doesn't expect values to be changed underneath.
With this change, slab counters on parent level will become eventually
consistent. Once all dying children are gone, values are correct. And
if not, the error is capped by 32 * NR_CPUS pages per dying cgroup.
It's not perfect, as slab are reparented, so any updates after the
reparenting will happen on the parent level. It means that if a slab
page was allocated, a counter on child level was bumped, then the page
was reparented and freed, the annihilation of positive and negative
counter values will not happen until the child cgroup is released. It
makes slab counters different from others, and it might want us to
implement flushing in a correct form again. But it's also a question of
performance: scheduling a work on each cpu isn't free, and it's an open
question if the benefit of having more accurate counters is worth it.
We might also consider flushing all counters on offlining, not only slab
counters.
So let's fix the main problem now: make the slab counters eventually
consistent, so at least the error won't grow with uptime (or more
precisely the number of created and destroyed cgroups). And think about
the accuracy of counters separately.
Link: http://lkml.kernel.org/r/20191220042728.1045881-1-guro@fb.com
Fixes:
|
||
Kirill A. Shutemov
|
991589974d |
mm/shmem.c: thp, shmem: fix conflict of above-47bit hint address and PMD alignment
Shmem/tmpfs tries to provide THP-friendly mappings if huge pages are
enabled. But it doesn't work well with above-47bit hint address.
Normally, the kernel doesn't create userspace mappings above 47-bit,
even if the machine allows this (such as with 5-level paging on x86-64).
Not all user space is ready to handle wide addresses. It's known that
at least some JIT compilers use higher bits in pointers to encode their
information.
Userspace can ask for allocation from full address space by specifying
hint address (with or without MAP_FIXED) above 47-bits. If the
application doesn't need a particular address, but wants to allocate
from whole address space it can specify -1 as a hint address.
Unfortunately, this trick breaks THP alignment in shmem/tmp:
shmem_get_unmapped_area() would not try to allocate PMD-aligned area if
*any* hint address specified.
This can be fixed by requesting the aligned area if the we failed to
allocated at user-specified hint address. The request with inflated
length will also take the user-specified hint address. This way we will
not lose an allocation request from the full address space.
[kirill@shutemov.name: fold in a fixup]
Link: http://lkml.kernel.org/r/20191223231309.t6bh5hkbmokihpfu@box
Link: http://lkml.kernel.org/r/20191220142548.7118-3-kirill.shutemov@linux.intel.com
Fixes:
|
||
|
Kirill A. Shutemov
|
97d3d0f9a1 |
mm/huge_memory.c: thp: fix conflict of above-47bit hint address and PMD alignment
Patch series "Fix two above-47bit hint address vs. THP bugs".
The two get_unmapped_area() implementations have to be fixed to provide
THP-friendly mappings if above-47bit hint address is specified.
This patch (of 2):
Filesystems use thp_get_unmapped_area() to provide THP-friendly
mappings. For DAX in particular.
Normally, the kernel doesn't create userspace mappings above 47-bit,
even if the machine allows this (such as with 5-level paging on x86-64).
Not all user space is ready to handle wide addresses. It's known that
at least some JIT compilers use higher bits in pointers to encode their
information.
Userspace can ask for allocation from full address space by specifying
hint address (with or without MAP_FIXED) above 47-bits. If the
application doesn't need a particular address, but wants to allocate
from whole address space it can specify -1 as a hint address.
Unfortunately, this trick breaks thp_get_unmapped_area(): the function
would not try to allocate PMD-aligned area if *any* hint address
specified.
Modify the routine to handle it correctly:
- Try to allocate the space at the specified hint address with length
padding required for PMD alignment.
- If failed, retry without length padding (but with the same hint
address);
- If the returned address matches the hint address return it.
- Otherwise, align the address as required for THP and return.
The user specified hint address is passed down to get_unmapped_area() so
above-47bit hint address will be taken into account without breaking
alignment requirements.
Link: http://lkml.kernel.org/r/20191220142548.7118-2-kirill.shutemov@linux.intel.com
Fixes:
|
||
|
David Hildenbrand
|
8068df3b60 |
mm/memory_hotplug: don't free usage map when removing a re-added early section
When we remove an early section, we don't free the usage map, as the
usage maps of other sections are placed into the same page. Once the
section is removed, it is no longer an early section (especially, the
memmap is freed). When we re-add that section, the usage map is reused,
however, it is no longer an early section. When removing that section
again, we try to kfree() a usage map that was allocated during early
boot - bad.
Let's check against PageReserved() to see if we are dealing with an
usage map that was allocated during boot. We could also check against
!(PageSlab(usage_page) || PageCompound(usage_page)), but PageReserved() is
cleaner.
Can be triggered using memtrace under ppc64/powernv:
$ mount -t debugfs none /sys/kernel/debug/
$ echo 0x20000000 > /sys/kernel/debug/powerpc/memtrace/enable
$ echo 0x20000000 > /sys/kernel/debug/powerpc/memtrace/enable
------------[ cut here ]------------
kernel BUG at mm/slub.c:3969!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=3D64K MMU=3DHash SMP NR_CPUS=3D2048 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 154 Comm: sh Not tainted 5.5.0-rc2-next-20191216-00005-g0be1dba7b7c0 #61
NIP kfree+0x338/0x3b0
LR section_deactivate+0x138/0x200
Call Trace:
section_deactivate+0x138/0x200
__remove_pages+0x114/0x150
arch_remove_memory+0x3c/0x160
try_remove_memory+0x114/0x1a0
__remove_memory+0x20/0x40
memtrace_enable_set+0x254/0x850
simple_attr_write+0x138/0x160
full_proxy_write+0x8c/0x110
__vfs_write+0x38/0x70
vfs_write+0x11c/0x2a0
ksys_write+0x84/0x140
system_call+0x5c/0x68
---[ end trace 4b053cbd84e0db62 ]---
The first invocation will offline+remove memory blocks. The second
invocation will first add+online them again, in order to offline+remove
them again (usually we are lucky and the exact same memory blocks will
get "reallocated").
Tested on powernv with boot memory: The usage map will not get freed.
Tested on x86-64 with DIMMs: The usage map will get freed.
Using Dynamic Memory under a Power DLAPR can trigger it easily.
Triggering removal (I assume after previously removed+re-added) of
memory from the HMC GUI can crash the kernel with the same call trace
and is fixed by this patch.
Link: http://lkml.kernel.org/r/20191217104637.5509-1-david@redhat.com
Fixes:
|
||
|
Vlastimil Babka
|
cc638f329e |
mm, thp: tweak reclaim/compaction effort of local-only and all-node allocations
THP page faults now attempt a __GFP_THISNODE allocation first, which
should only compact existing free memory, followed by another attempt
that can allocate from any node using reclaim/compaction effort
specified by global defrag setting and madvise.
This patch makes the following changes to the scheme:
- Before the patch, the first allocation relies on a check for
pageblock order and __GFP_IO to prevent excessive reclaim. This
however affects also the second attempt, which is not limited to
single node.
Instead of that, reuse the existing check for costly order
__GFP_NORETRY allocations, and make sure the first THP attempt uses
__GFP_NORETRY. As a side-effect, all costly order __GFP_NORETRY
allocations will bail out if compaction needs reclaim, while
previously they only bailed out when compaction was deferred due to
previous failures.
This should be still acceptable within the __GFP_NORETRY semantics.
- Before the patch, the second allocation attempt (on all nodes) was
passing __GFP_NORETRY. This is redundant as the check for pageblock
order (discussed above) was stronger. It's also contrary to
madvise(MADV_HUGEPAGE) which means some effort to allocate THP is
requested.
After this patch, the second attempt doesn't pass __GFP_THISNODE nor
__GFP_NORETRY.
To sum up, THP page faults now try the following attempts:
1. local node only THP allocation with no reclaim, just compaction.
2. for madvised VMA's or when synchronous compaction is enabled always - THP
allocation from any node with effort determined by global defrag setting
and VMA madvise
3. fallback to base pages on any node
Link: http://lkml.kernel.org/r/08a3f4dd-c3ce-0009-86c5-9ee51aba8557@suse.cz
Fixes:
|
||
Catalin Marinas
|
24cecc3774 |
arm64: Revert support for execute-only user mappings
The ARMv8 64-bit architecture supports execute-only user permissions by clearing the PTE_USER and PTE_UXN bits, practically making it a mostly privileged mapping but from which user running at EL0 can still execute. The downside, however, is that the kernel at EL1 inadvertently reading such mapping would not trip over the PAN (privileged access never) protection. Revert the relevant bits from commit |
||
Waiman Long
|
c77c0a8ac4 |
mm/hugetlb: defer freeing of huge pages if in non-task context
The following lockdep splat was observed when a certain hugetlbfs test was run: ================================ WARNING: inconsistent lock state 4.18.0-159.el8.x86_64+debug #1 Tainted: G W --------- - - -------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/30/0 [HC0[0]:SC1[1]:HE1:SE0] takes: ffffffff9acdc038 (hugetlb_lock){+.?.}, at: free_huge_page+0x36f/0xaa0 {SOFTIRQ-ON-W} state was registered at: lock_acquire+0x14f/0x3b0 _raw_spin_lock+0x30/0x70 __nr_hugepages_store_common+0x11b/0xb30 hugetlb_sysctl_handler_common+0x209/0x2d0 proc_sys_call_handler+0x37f/0x450 vfs_write+0x157/0x460 ksys_write+0xb8/0x170 do_syscall_64+0xa5/0x4d0 entry_SYSCALL_64_after_hwframe+0x6a/0xdf irq event stamp: 691296 hardirqs last enabled at (691296): [<ffffffff99bb034b>] _raw_spin_unlock_irqrestore+0x4b/0x60 hardirqs last disabled at (691295): [<ffffffff99bb0ad2>] _raw_spin_lock_irqsave+0x22/0x81 softirqs last enabled at (691284): [<ffffffff97ff0c63>] irq_enter+0xc3/0xe0 softirqs last disabled at (691285): [<ffffffff97ff0ebe>] irq_exit+0x23e/0x2b0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(hugetlb_lock); <Interrupt> lock(hugetlb_lock); *** DEADLOCK *** : Call Trace: <IRQ> __lock_acquire+0x146b/0x48c0 lock_acquire+0x14f/0x3b0 _raw_spin_lock+0x30/0x70 free_huge_page+0x36f/0xaa0 bio_check_pages_dirty+0x2fc/0x5c0 clone_endio+0x17f/0x670 [dm_mod] blk_update_request+0x276/0xe50 scsi_end_request+0x7b/0x6a0 scsi_io_completion+0x1c6/0x1570 blk_done_softirq+0x22e/0x350 __do_softirq+0x23d/0xad8 irq_exit+0x23e/0x2b0 do_IRQ+0x11a/0x200 common_interrupt+0xf/0xf </IRQ> Both the hugetbl_lock and the subpool lock can be acquired in free_huge_page(). One way to solve the problem is to make both locks irq-safe. However, Mike Kravetz had learned that the hugetlb_lock is held for a linear scan of ALL hugetlb pages during a cgroup reparentling operation. So it is just too long to have irq disabled unless we can break hugetbl_lock down into finer-grained locks with shorter lock hold times. Another alternative is to defer the freeing to a workqueue job. This patch implements the deferred freeing by adding a free_hpage_workfn() work function to do the actual freeing. The free_huge_page() call in a non-task context saves the page to be freed in the hpage_freelist linked list in a lockless manner using the llist APIs. The generic workqueue is used to process the work, but a dedicated workqueue can be used instead if it is desirable to have the huge page freed ASAP. Thanks to Kirill Tkhai <ktkhai@virtuozzo.com> for suggesting the use of llist APIs which simplfy the code. Link: http://lkml.kernel.org/r/20191217170331.30893-1-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Navid Emamdoost
|
a7c46c0c0e |
mm/gup: fix memory leak in __gup_benchmark_ioctl
In the implementation of __gup_benchmark_ioctl() the allocated pages
should be released before returning in case of an invalid cmd. Release
pages via kvfree().
[akpm@linux-foundation.org: rework code flow, return -EINVAL rather than -1]
Link: http://lkml.kernel.org/r/20191211174653.4102-1-navid.emamdoost@gmail.com
Fixes:
|
||
Ilya Dryomov
|
941f762bcb |
mm/oom: fix pgtables units mismatch in Killed process message
pr_err() expects kB, but mm_pgtables_bytes() returns the number of bytes.
As everything else is printed in kB, I chose to fix the value rather than
the string.
Before:
[ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name
...
[ 1878] 1000 1878 217253 151144 1269760 0 0 python
...
Out of memory: Killed process 1878 (python) total-vm:869012kB, anon-rss:604572kB, file-rss:4kB, shmem-rss:0kB, UID:1000 pgtables:1269760kB oom_score_adj:0
After:
[ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name
...
[ 1436] 1000 1436 217253 151890 1294336 0 0 python
...
Out of memory: Killed process 1436 (python) total-vm:869012kB, anon-rss:607516kB, file-rss:44kB, shmem-rss:0kB, UID:1000 pgtables:1264kB oom_score_adj:0
Link: http://lkml.kernel.org/r/20191211202830.1600-1-idryomov@gmail.com
Fixes:
|
||
|
Yang Shi
|
e0153fc2c7 |
mm: move_pages: return valid node id in status if the page is already on the target node
Felix Abecassis reports move_pages() would return random status if the
pages are already on the target node by the below test program:
int main(void)
{
const long node_id = 1;
const long page_size = sysconf(_SC_PAGESIZE);
const int64_t num_pages = 8;
unsigned long nodemask = 1 << node_id;
long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask));
if (ret < 0)
return (EXIT_FAILURE);
void **pages = malloc(sizeof(void*) * num_pages);
for (int i = 0; i < num_pages; ++i) {
pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ,
MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS,
-1, 0);
if (pages[i] == MAP_FAILED)
return (EXIT_FAILURE);
}
ret = set_mempolicy(MPOL_DEFAULT, NULL, 0);
if (ret < 0)
return (EXIT_FAILURE);
int *nodes = malloc(sizeof(int) * num_pages);
int *status = malloc(sizeof(int) * num_pages);
for (int i = 0; i < num_pages; ++i) {
nodes[i] = node_id;
status[i] = 0xd0; /* simulate garbage values */
}
ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE);
printf("move_pages: %ld\n", ret);
for (int i = 0; i < num_pages; ++i)
printf("status[%d] = %d\n", i, status[i]);
}
Then running the program would return nonsense status values:
$ ./move_pages_bug
move_pages: 0
status[0] = 208
status[1] = 208
status[2] = 208
status[3] = 208
status[4] = 208
status[5] = 208
status[6] = 208
status[7] = 208
This is because the status is not set if the page is already on the
target node, but move_pages() should return valid status as long as it
succeeds. The valid status may be errno or node id.
We can't simply initialize status array to zero since the pages may be
not on node 0. Fix it by updating status with node id which the page is
already on.
Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com
Fixes:
|
||
Chanho Min
|
ac8f05da51 |
mm/zsmalloc.c: fix the migrated zspage statistics.
When zspage is migrated to the other zone, the zone page state should be
updated as well, otherwise the NR_ZSPAGE for each zone shows wrong
counts including proc/zoneinfo in practice.
Link: http://lkml.kernel.org/r/1575434841-48009-1-git-send-email-chanho.min@lge.com
Fixes:
|
||
|
David Hildenbrand
|
feee6b2989 |
mm/memory_hotplug: shrink zones when offlining memory
We currently try to shrink a single zone when removing memory. We use
the zone of the first page of the memory we are removing. If that
memmap was never initialized (e.g., memory was never onlined), we will
read garbage and can trigger kernel BUGs (due to a stale pointer):
BUG: unable to handle page fault for address: 000000000000353d
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ #317
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
RIP: 0010:clear_zone_contiguous+0x5/0x10
Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840
RSP: 0018:ffffad2400043c98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000
RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40
RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000
R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680
FS: 0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__remove_pages+0x4b/0x640
arch_remove_memory+0x63/0x8d
try_remove_memory+0xdb/0x130
__remove_memory+0xa/0x11
acpi_memory_device_remove+0x70/0x100
acpi_bus_trim+0x55/0x90
acpi_device_hotplug+0x227/0x3a0
acpi_hotplug_work_fn+0x1a/0x30
process_one_work+0x221/0x550
worker_thread+0x50/0x3b0
kthread+0x105/0x140
ret_from_fork+0x3a/0x50
Modules linked in:
CR2: 000000000000353d
Instead, shrink the zones when offlining memory or when onlining failed.
Introduce and use remove_pfn_range_from_zone(() for that. We now
properly shrink the zones, even if we have DIMMs whereby
- Some memory blocks fall into no zone (never onlined)
- Some memory blocks fall into multiple zones (offlined+re-onlined)
- Multiple memory blocks that fall into different zones
Drop the zone parameter (with a potential dubious value) from
__remove_pages() and __remove_section().
Link: http://lkml.kernel.org/r/20191006085646.5768-6-david@redhat.com
Fixes:
|
||
|
Yang Shi
|
42a9a53bb3 |
mm: vmscan: protect shrinker idr replace with CONFIG_MEMCG
Since commit |
||
Daniel Axtens
|
253a496d8e |
kasan: don't assume percpu shadow allocations will succeed
syzkaller and the fault injector showed that I was wrong to assume that
we could ignore percpu shadow allocation failures.
Handle failures properly. Merge all the allocated areas back into the
free list and release the shadow, then clean up and return NULL. The
shadow is released unconditionally, which relies upon the fact that the
release function is able to tolerate pages not being present.
Also clean up shadows in the recovery path - currently they are not
released, which leaks a bit of memory.
Link: http://lkml.kernel.org/r/20191205140407.1874-3-dja@axtens.net
Fixes:
|
||
|
Daniel Axtens
|
e218f1ca39 |
kasan: use apply_to_existing_page_range() for releasing vmalloc shadow
kasan_release_vmalloc uses apply_to_page_range to release vmalloc
shadow. Unfortunately, apply_to_page_range can allocate memory to fill
in page table entries, which is not what we want.
Also, kasan_release_vmalloc is called under free_vmap_area_lock, so if
apply_to_page_range does allocate memory, we get a sleep in atomic bug:
BUG: sleeping function called from invalid context at mm/page_alloc.c:4681
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 15087, name:
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x199/0x216 lib/dump_stack.c:118
___might_sleep.cold.97+0x1f5/0x238 kernel/sched/core.c:6800
__might_sleep+0x95/0x190 kernel/sched/core.c:6753
prepare_alloc_pages mm/page_alloc.c:4681 [inline]
__alloc_pages_nodemask+0x3cd/0x890 mm/page_alloc.c:4730
alloc_pages_current+0x10c/0x210 mm/mempolicy.c:2211
alloc_pages include/linux/gfp.h:532 [inline]
__get_free_pages+0xc/0x40 mm/page_alloc.c:4786
__pte_alloc_one_kernel include/asm-generic/pgalloc.h:21 [inline]
pte_alloc_one_kernel include/asm-generic/pgalloc.h:33 [inline]
__pte_alloc_kernel+0x1d/0x200 mm/memory.c:459
apply_to_pte_range mm/memory.c:2031 [inline]
apply_to_pmd_range mm/memory.c:2068 [inline]
apply_to_pud_range mm/memory.c:2088 [inline]
apply_to_p4d_range mm/memory.c:2108 [inline]
apply_to_page_range+0x77d/0xa00 mm/memory.c:2133
kasan_release_vmalloc+0xa7/0xc0 mm/kasan/common.c:970
__purge_vmap_area_lazy+0xcbb/0x1f30 mm/vmalloc.c:1313
try_purge_vmap_area_lazy mm/vmalloc.c:1332 [inline]
free_vmap_area_noflush+0x2ca/0x390 mm/vmalloc.c:1368
free_unmap_vmap_area mm/vmalloc.c:1381 [inline]
remove_vm_area+0x1cc/0x230 mm/vmalloc.c:2209
vm_remove_mappings mm/vmalloc.c:2236 [inline]
__vunmap+0x223/0xa20 mm/vmalloc.c:2299
__vfree+0x3f/0xd0 mm/vmalloc.c:2356
__vmalloc_area_node mm/vmalloc.c:2507 [inline]
__vmalloc_node_range+0x5d5/0x810 mm/vmalloc.c:2547
__vmalloc_node mm/vmalloc.c:2607 [inline]
__vmalloc_node_flags mm/vmalloc.c:2621 [inline]
vzalloc+0x6f/0x80 mm/vmalloc.c:2666
alloc_one_pg_vec_page net/packet/af_packet.c:4233 [inline]
alloc_pg_vec net/packet/af_packet.c:4258 [inline]
packet_set_ring+0xbc0/0x1b50 net/packet/af_packet.c:4342
packet_setsockopt+0xed7/0x2d90 net/packet/af_packet.c:3695
__sys_setsockopt+0x29b/0x4d0 net/socket.c:2117
__do_sys_setsockopt net/socket.c:2133 [inline]
__se_sys_setsockopt net/socket.c:2130 [inline]
__x64_sys_setsockopt+0xbe/0x150 net/socket.c:2130
do_syscall_64+0xfa/0x780 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Switch to using the apply_to_existing_page_range() helper instead, which
won't allocate memory.
[akpm@linux-foundation.org: s/apply_to_existing_pages/apply_to_existing_page_range/]
Link: http://lkml.kernel.org/r/20191205140407.1874-2-dja@axtens.net
Fixes:
|
||
|
Daniel Axtens
|
be1db4753e |
mm/memory.c: add apply_to_existing_page_range() helper
apply_to_page_range() takes an address range, and if any parts of it are not covered by the existing page table hierarchy, it allocates memory to fill them in. In some use cases, this is not what we want - we want to be able to operate exclusively on PTEs that are already in the tables. Add apply_to_existing_page_range() for this. Adjust the walker functions for apply_to_page_range to take 'create', which switches them between the old and new modes. This will be used in KASAN vmalloc. [akpm@linux-foundation.org: reduce code duplication] [akpm@linux-foundation.org: s/apply_to_existing_pages/apply_to_existing_page_range/] [akpm@linux-foundation.org: initialize __apply_to_page_range::err] Link: http://lkml.kernel.org/r/20191205140407.1874-1-dja@axtens.net Signed-off-by: Daniel Axtens <dja@axtens.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Daniel Axtens <dja@axtens.net> Cc: Qian Cai <cai@lca.pw> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Andrey Ryabinin
|
d98c9e83b5 |
kasan: fix crashes on access to memory mapped by vm_map_ram()
With CONFIG_KASAN_VMALLOC=y any use of memory obtained via vm_map_ram()
will crash because there is no shadow backing that memory.
Instead of sprinkling additional kasan_populate_vmalloc() calls all over
the vmalloc code, move it into alloc_vmap_area(). This will fix
vm_map_ram() and simplify the code a bit.
[aryabinin@virtuozzo.com: v2]
Link: http://lkml.kernel.org/r/20191205095942.1761-1-aryabinin@virtuozzo.comLink: http://lkml.kernel.org/r/20191204204534.32202-1-aryabinin@virtuozzo.com
Fixes:
|
||
Linus Torvalds
|
5ecc9d15f7 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "Most of the rest of MM and various other things. Some Kconfig rework still awaits merges of dependent trees from linux-next. Subsystems affected by this patch series: mm/hotfixes, mm/memcg, mm/vmstat, mm/thp, procfs, sysctl, misc, notifiers, core-kernel, bitops, lib, checkpatch, epoll, binfmt, init, rapidio, uaccess, kcov, ubsan, ipc, bitmap, mm/pagemap" * akpm: (86 commits) mm: remove __ARCH_HAS_4LEVEL_HACK and include/asm-generic/4level-fixup.h um: add support for folded p4d page tables um: remove unused pxx_offset_proc() and addr_pte() functions sparc32: use pgtable-nopud instead of 4level-fixup parisc/hugetlb: use pgtable-nopXd instead of 4level-fixup parisc: use pgtable-nopXd instead of 4level-fixup nds32: use pgtable-nopmd instead of 4level-fixup microblaze: use pgtable-nopmd instead of 4level-fixup m68k: mm: use pgtable-nopXd instead of 4level-fixup m68k: nommu: use pgtable-nopud instead of 4level-fixup c6x: use pgtable-nopud instead of 4level-fixup arm: nommu: use pgtable-nopud instead of 4level-fixup alpha: use pgtable-nopud instead of 4level-fixup gpio: pca953x: tighten up indentation gpio: pca953x: convert to use bitmap API gpio: pca953x: use input from regs structure in pca953x_irq_pending() gpio: pca953x: remove redundant variable and check in IRQ handler lib/bitmap: introduce bitmap_replace() helper lib/test_bitmap: fix comment about this file lib/test_bitmap: move exp1 and exp2 upper for others to use ... |
||
Mike Rapoport
|
f949286c66 |
mm: remove __ARCH_HAS_4LEVEL_HACK and include/asm-generic/4level-fixup.h
There are no architectures that use include/asm-generic/4level-fixup.h therefore it can be removed along with __ARCH_HAS_4LEVEL_HACK define. Link: http://lkml.kernel.org/r/1572938135-31886-14-git-send-email-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Anatoly Pugachev <matorola@gmail.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Peter Rosin <peda@axentia.se> Cc: Richard Weinberger <richard@nod.at> Cc: Rolf Eike Beer <eike-kernel@sf-tec.de> Cc: Russell King <linux@armlinux.org.uk> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Yu Zhao
|
3cde287bb4 |
mm/memory.c: replace is_zero_pfn with is_huge_zero_pmd for thp
For hugely mapped thp, we use is_huge_zero_pmd() to check if it's zero page or not. We do fill ptes with my_zero_pfn() when we split zero thp pmd, but this is not what we have in vm_normal_page_pmd() -- pmd_trans_huge_lock() makes sure of it. This is a trivial fix for /proc/pid/numa_maps, and AFAIK nobody complains about it. Gerald Schaefer asked: : Maybe the description could also mention the symptom of this bug? : I would assume that it affects anon/dirty accounting in gather_pte_stats(), : for huge mappings, if zero page mappings are not correctly recognized. I came across this while I was looking at the code, so I'm not aware of any symptom. Link: http://lkml.kernel.org/r/20191108192629.201556-1-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Will Deacon <will@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Konstantin Khlebnikov
|
ebc5d83d04 |
mm/memcontrol: use vmstat names for printing statistics
Use common names from vmstat array when possible. This gives not much difference in code size for now, but should help in keeping interfaces consistent. add/remove: 0/2 grow/shrink: 2/0 up/down: 70/-72 (-2) Function old new delta memory_stat_format 984 1050 +66 memcg_stat_show 957 961 +4 memcg1_event_names 32 - -32 mem_cgroup_lru_names 40 - -40 Total: Before=14485337, After=14485335, chg -0.00% Link: http://lkml.kernel.org/r/157113012508.453.80391533767219371.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Konstantin Khlebnikov
|
9d7ea9a297 |
mm/vmstat: add helpers to get vmstat item names for each enum type
Statistics in vmstat is combined from counters with different structure, but names for them are merged into one array. This patch adds trivial helpers to get name for each item: const char *zone_stat_name(enum zone_stat_item item); const char *numa_stat_name(enum numa_stat_item item); const char *node_stat_name(enum node_stat_item item); const char *writeback_stat_name(enum writeback_stat_item item); const char *vm_event_name(enum vm_event_item item); Names for enum writeback_stat_item are folded in the middle of vmstat_text so this patch moves declaration into header to calculate offset of following items. Also this patch reuses piece of node stat names for lru list names: const char *lru_list_name(enum lru_list lru); This returns common lru list names: "inactive_anon", "active_anon", "inactive_file", "active_file", "unevictable". [khlebnikov@yandex-team.ru: do not use size of vmstat_text as count of /proc/vmstat items] Link: http://lkml.kernel.org/r/157152151769.4139.15423465513138349343.stgit@buzz Link: https://lore.kernel.org/linux-mm/cd1c42ae-281f-c8a8-70ac-1d01d417b2e1@infradead.org/T/#u Link: http://lkml.kernel.org/r/157113012325.453.562783073839432766.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: YueHaibing <yuehaibing@huawei.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Roman Gushchin
|
a264df74df |
mm: memcg/slab: wait for !root kmem_cache refcnt killing on root kmem_cache destruction
Christian reported a warning like the following obtained during running
some KVM-related tests on s390:
WARNING: CPU: 8 PID: 208 at lib/percpu-refcount.c:108 percpu_ref_exit+0x50/0x58
Modules linked in: kvm(-) xt_CHECKSUM xt_MASQUERADE bonding xt_tcpudp ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ip6table_na>
CPU: 8 PID: 208 Comm: kworker/8:1 Not tainted 5.2.0+ #66
Hardware name: IBM 2964 NC9 712 (LPAR)
Workqueue: events sysfs_slab_remove_workfn
Krnl PSW : 0704e00180000000 0000001529746850 (percpu_ref_exit+0x50/0x58)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 00000000ffff8808 0000001529746740 000003f4e30e8e18 0036008100000000
0000001f00000000 0035008100000000 0000001fb3573ab8 0000000000000000
0000001fbdb6de00 0000000000000000 0000001529f01328 0000001fb3573b00
0000001fbb27e000 0000001fbdb69300 000003e009263d00 000003e009263cd0
Krnl Code: 0000001529746842: f0a0000407fe srp 4(11,%r0),2046,0
0000001529746848: 47000700 bc 0,1792
#000000152974684c: a7f40001 brc 15,152974684e
>0000001529746850: a7f4fff2 brc 15,1529746834
0000001529746854: 0707 bcr 0,%r7
0000001529746856: 0707 bcr 0,%r7
0000001529746858: eb8ff0580024 stmg %r8,%r15,88(%r15)
000000152974685e: a738ffff lhi %r3,-1
Call Trace:
([<000003e009263d00>] 0x3e009263d00)
[<00000015293252ea>] slab_kmem_cache_release+0x3a/0x70
[<0000001529b04882>] kobject_put+0xaa/0xe8
[<000000152918cf28>] process_one_work+0x1e8/0x428
[<000000152918d1b0>] worker_thread+0x48/0x460
[<00000015291942c6>] kthread+0x126/0x160
[<0000001529b22344>] ret_from_fork+0x28/0x30
[<0000001529b2234c>] kernel_thread_starter+0x0/0x10
Last Breaking-Event-Address:
[<000000152974684c>] percpu_ref_exit+0x4c/0x58
---[ end trace b035e7da5788eb09 ]---
The problem occurs because kmem_cache_destroy() is called immediately
after deleting of a memcg, so it races with the memcg kmem_cache
deactivation.
flush_memcg_workqueue() at the beginning of kmem_cache_destroy() is
supposed to guarantee that all deactivation processes are finished, but
failed to do so. It waits for an rcu grace period, after which all
children kmem_caches should be deactivated. During the deactivation
percpu_ref_kill() is called for non root kmem_cache refcounters, but it
requires yet another rcu grace period to finish the transition to the
atomic (dead) state.
So in a rare case when not all children kmem_caches are destroyed at the
moment when the root kmem_cache is about to be gone, we need to wait
another rcu grace period before destroying the root kmem_cache.
This issue can be triggered only with dynamically created kmem_caches
which are used with memcg accounting. In this case per-memcg child
kmem_caches are created. They are deactivated from the cgroup removing
path. If the destruction of the root kmem_cache is racing with the
removal of the cgroup (both are quite complicated multi-stage
processes), the described issue can occur. The only known way to
trigger it in the real life, is to unload some kernel module which
creates a dedicated kmem_cache, used from different memory cgroups with
GFP_ACCOUNT flag. If the unloading happens immediately after calling
rmdir on the corresponding cgroup, there is some chance to trigger the
issue.
Link: http://lkml.kernel.org/r/20191129025011.3076017-1-guro@fb.com
Fixes:
|
||
zhong jiang
|
2e7d31704c |
mm/kasan/common.c: fix compile error
I hit the following compile error in arch/x86/
mm/kasan/common.c: In function kasan_populate_vmalloc:
mm/kasan/common.c:797:2: error: implicit declaration of function flush_cache_vmap; did you mean flush_rcu_work? [-Werror=implicit-function-declaration]
flush_cache_vmap(shadow_start, shadow_end);
^~~~~~~~~~~~~~~~
flush_rcu_work
cc1: some warnings being treated as errors
Link: http://lkml.kernel.org/r/1575363013-43761-1-git-send-email-zhongjiang@huawei.com
Fixes:
|
||
|
Linus Torvalds
|
aedc0650f9 |
* PPC secure guest support
* small x86 cleanup * fix for an x86-specific out-of-bounds write on a ioctl (not guest triggerable, data not attacker-controlled) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQEcBAABAgAGBQJd551cAAoJEL/70l94x66D+JkH/R3eEOyvckPmYmzd0lnV8mQ/ 7e0n2G/aD+iLZkcCbUnMaImdmSJmoEEJCPjgPk/5nJ3zUi5b/ABWyidEM5uf19Hl rzKBg0DR7BiQptPnZv2JMwEVKu3JOTchMykqu9xXChQlICocZ0xjdOA6nQ19p0Lv FulDw5MUaWrXevIzCBskQ38zJejRQA6CpD1lQkHn7LKS9p3p+BsAOd/Ouy87RfWG b3ktECNbXyO6KStrrhgm+z8pviWY+kqYklyBlDOOwxWif0x8WvNDpQLoVo+ZuhLU Me8YJ1BN75vFlxzh6ZK5exBUnm9E3fGVKIaaF+dpuds2x+j4HnYl+lZCm89MdqY= =Q4v7 -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull more KVM updates from Paolo Bonzini: - PPC secure guest support - small x86 cleanup - fix for an x86-specific out-of-bounds write on a ioctl (not guest triggerable, data not attacker-controlled) * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: vmx: Stop wasting a page for guest_msrs KVM: x86: fix out-of-bounds write in KVM_GET_EMULATED_CPUID (CVE-2019-19332) Documentation: kvm: Fix mention to number of ioctls classes powerpc: Ultravisor: Add PPC_UV config option KVM: PPC: Book3S HV: Support reset of secure guest KVM: PPC: Book3S HV: Handle memory plug/unplug to secure VM KVM: PPC: Book3S HV: Radix changes for secure guest KVM: PPC: Book3S HV: Shared pages support for secure guests KVM: PPC: Book3S HV: Support for running secure guests mm: ksm: Export ksm_madvise() KVM x86: Move kvm cpuid support out of svm |
||
Minchan Kim
|
937790699b |
mm/page_io.c: annotate refault stalls from swap_readpage
If a block device supports rw_page operation, it doesn't submit bios so the annotation in submit_bio() for refault stall doesn't work. It happens with zram in android, especially swap read path which could consume CPU cycle for decompress. It is also a problem for zswap which uses frontswap. Annotate swap_readpage() to account the synchronous IO overhead to prevent underreport memory pressure. [akpm@linux-foundation.org: add comment, per Johannes] Link: http://lkml.kernel.org/r/20191010152134.38545-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Randy Dunlap
|
dd33d29a19 |
mm/Kconfig: fix trivial help text punctuation
End a Kconfig help text sentence with a period (aka full stop). Link: http://lkml.kernel.org/r/c17f2c75-dc2a-42a4-2229-bb6b489addf2@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Krzysztof Kozlowski
|
19fa40a0f2 |
mm/Kconfig: fix indentation
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ / /' -i */Kconfig Link: http://lkml.kernel.org/r/1574306437-28837-1-git-send-email-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Kosina <trivial@kernel.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Souptick Joarder
|
12cc1c7345 |
mm/memory_hotplug.c: remove __online_page_set_limits()
__online_page_set_limits() is a dummy function - remove it and all callers. Link: http://lkml.kernel.org/r/8e1bc9d3b492f6bde16e95ebc1dee11d6aefabd7.1567889743.git.jrdr.linux@gmail.com Link: http://lkml.kernel.org/r/854db2cf8145d9635249c95584d9a91fd774a229.1567889743.git.jrdr.linux@gmail.com Link: http://lkml.kernel.org/r/9afe6c5a18158f3884a6b302ac2c772f3da49ccc.1567889743.git.jrdr.linux@gmail.com Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Juergen Gross <jgross@suse.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Wei Yang
|
f4f5329d45 |
mm: fix typos in comments when calling __SetPageUptodate()
There are several places emphasise the effect of __SetPageUptodate(), while the comment seems to have a typo in two places. Link: http://lkml.kernel.org/r/20190926023705.7226-1-richardw.yang@linux.intel.com Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Chen Jun
|
aa71ecd8d8 |
mm/shmem.c: cast the type of unmap_start to u64
In 64bit system. sb->s_maxbytes of shmem filesystem is MAX_LFS_FILESIZE, which equal LLONG_MAX. If offset > LLONG_MAX - PAGE_SIZE, offset + len < LLONG_MAX in shmem_fallocate, which will pass the checking in vfs_fallocate. /* Check for wrap through zero too */ if (((offset + len) > inode->i_sb->s_maxbytes) || ((offset + len) < 0)) return -EFBIG; loff_t unmap_start = round_up(offset, PAGE_SIZE) in shmem_fallocate causes a overflow. Syzkaller reports a overflow problem in mm/shmem: UBSAN: Undefined behaviour in mm/shmem.c:2014:10 signed integer overflow: '9223372036854775807 + 1' cannot be represented in type 'long long int' CPU: 0 PID:17076 Comm: syz-executor0 Not tainted 4.1.46+ #1 Hardware name: linux, dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2c8 arch/arm64/kernel/traps.c:100 show_stack+0x20/0x30 arch/arm64/kernel/traps.c:238 __dump_stack lib/dump_stack.c:15 [inline] ubsan_epilogue+0x18/0x70 lib/ubsan.c:164 handle_overflow+0x158/0x1b0 lib/ubsan.c:195 shmem_fallocate+0x6d0/0x820 mm/shmem.c:2104 vfs_fallocate+0x238/0x428 fs/open.c:312 SYSC_fallocate fs/open.c:335 [inline] SyS_fallocate+0x54/0xc8 fs/open.c:239 The highest bit of unmap_start will be appended with sign bit 1 (overflow) when calculate shmem_falloc.start: shmem_falloc.start = unmap_start >> PAGE_SHIFT. Fix it by casting the type of unmap_start to u64, when right shifted. This bug is found in LTS Linux 4.1. It also seems to exist in mainline. Link: http://lkml.kernel.org/r/1573867464-5107-1-git-send-email-chenjun102@huawei.com Signed-off-by: Chen Jun <chenjun102@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Qian Cai <cai@lca.pw> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Yang Shi
|
4afab1cd25 |
mm: shmem: use proper gfp flags for shmem_writepage()
The shmem_writepage() uses GFP_ATOMIC to allocate swap cache. GFP_ATOMIC used to mean __GFP_HIGH, but now it means __GFP_HIGH | __GFP_ATOMIC | __GFP_KSWAPD_RECLAIM. However, shmem_writepage() should write out to swap only in response to memory pressure, so __GFP_KSWAPD_RECLAIM looks useless since the caller may be kswapd itself or in direct reclaim already. In addition, XArray node allocations from PF_MEMALLOC contexts could completely exhaust the page allocator, __GFP_NOMEMALLOC stops emergency reserves from being allocated. Here just copy the gfp flags used by add_to_swap(). Hugh: "a cleanup to make the two calls look the same when they don't need to be different (whereas the call from __read_swap_cache_async() rightly uses a lower priority gfp)". Link: http://lkml.kernel.org/r/1572991351-86061-1-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Colin Ian King
|
26083eb6b1 |
mm/shmem.c: make array 'values' static const, makes object smaller
Don't populate the array 'values' on the stack but instead make it static const. Makes the object code smaller by 111 bytes. Before: text data bss dec hex filename 108612 11169 512 120293 1d5e5 mm/shmem.o After: text data bss dec hex filename 108437 11233 512 120182 1d576 mm/shmem.o (gcc version 9.2.1, amd64) Link: http://lkml.kernel.org/r/20190906143012.28698-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Wei Yang
|
643aa36ead |
userfaultfd: wrap the common dst_vma check into an inlined function
When doing UFFDIO_COPY, it is necessary to find the correct destination vma and make sure fault range is in it. Since there are two places need to do the same task, just wrap those common check into an inlined function. Link: http://lkml.kernel.org/r/20190927070032.2129-3-richardw.yang@linux.intel.com Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Wei Yang
|
53eaa14b62 |
userfaultfd: remove unnecessary WARN_ON() in __mcopy_atomic_hugetlb()
These warning here is to make sure address(dst_addr) and length(len -
copied) are huge page size aligned.
While this is ensured by:
dst_start and len is huge page size aligned
dst_addr equals to dst_start and increase huge page size each time
copied increase huge page size each time
This means these warnings will never be triggered.
Link: http://lkml.kernel.org/r/20190927070032.2129-2-richardw.yang@linux.intel.com
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Wei Yang
|
4fb07ee651 |
userfaultfd: use vma_pagesize for all huge page size calculation
In __mcopy_atomic_hugetlb() we use two variables to deal with huge page size: vma_hpagesize and huge_page_size. Since they are the same, it is not necessary to use two different mechanism. This patch makes it consistent by all using vma_hpagesize. Link: http://lkml.kernel.org/r/20190927070032.2129-1-richardw.yang@linux.intel.com Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |