[ Upstream commit 29cda393bc ]
Patch "bcache: rework error unwinding in register_bcache" from
Christoph Hellwig changes the local variables 'path' and 'err'
in undefined initial state. If the code in register_bcache() jumps
to label 'out:' or 'out_module_put:' by goto, these two variables
might be reference with undefined value by the following line,
out_module_put:
module_put(THIS_MODULE);
out:
pr_info("error %s: %s", path, err);
return ret;
Therefore this patch initializes these two local variables properly
in register_bcache() to avoid such issue.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1c3cc34f5 ]
Dan Carpenter points out that from commit 2aa8c52938 ("bcache: avoid
unnecessary btree nodes flushing in btree_flush_write()"), there is a
incorrect data type usage which leads to the following static checker
warning:
drivers/md/bcache/journal.c:444 btree_flush_write()
warn: 'ref_nr' unsigned <= 0
drivers/md/bcache/journal.c
422 static void btree_flush_write(struct cache_set *c)
423 {
424 struct btree *b, *t, *btree_nodes[BTREE_FLUSH_NR];
425 unsigned int i, nr, ref_nr;
^^^^^^
426 atomic_t *fifo_front_p, *now_fifo_front_p;
427 size_t mask;
428
429 if (c->journal.btree_flushing)
430 return;
431
432 spin_lock(&c->journal.flush_write_lock);
433 if (c->journal.btree_flushing) {
434 spin_unlock(&c->journal.flush_write_lock);
435 return;
436 }
437 c->journal.btree_flushing = true;
438 spin_unlock(&c->journal.flush_write_lock);
439
440 /* get the oldest journal entry and check its refcount */
441 spin_lock(&c->journal.lock);
442 fifo_front_p = &fifo_front(&c->journal.pin);
443 ref_nr = atomic_read(fifo_front_p);
444 if (ref_nr <= 0) {
^^^^^^^^^^^
Unsigned can't be less than zero.
445 /*
446 * do nothing if no btree node references
447 * the oldest journal entry
448 */
449 spin_unlock(&c->journal.lock);
450 goto out;
451 }
452 spin_unlock(&c->journal.lock);
As the warning information indicates, local varaible ref_nr in unsigned
int type is wrong, which does not matche atomic_read() and the "<= 0"
checking.
This patch fixes the above error by defining local variable ref_nr as
int type.
Fixes: 2aa8c52938 ("bcache: avoid unnecessary btree nodes flushing in btree_flush_write()")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c02b0055f ]
In bset.h, macro bset_bkey_last() is defined as,
bkey_idx((struct bkey *) (i)->d, (i)->keys)
Parameter i can be variable type of data structure, the macro always
works once the type of struct i has member 'd' and 'keys'.
bset_bkey_last() is also used in macro csum_set() to calculate the
checksum of a on-disk data structure. When csum_set() is used to
calculate checksum of on-disk bcache super block, the parameter 'i'
data type is struct cache_sb_disk. Inside struct cache_sb_disk (also in
struct cache_sb) the member keys is __u16 type. But bkey_idx() expects
unsigned int (a 32bit width), so there is problem when sending
parameters via stack to call bkey_idx().
Sparse tool from Intel 0day kbuild system reports this incompatible
problem. bkey_idx() is part of user space API, so the simplest fix is
to cast the (i)->keys to unsigned int type in macro bset_bkey_last().
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae3cd29991 ]
The patch "bcache: rework error unwinding in register_bcache" introduces
a use-after-free regression in register_bcache(). Here are current code,
2510 out_free_path:
2511 kfree(path);
2512 out_module_put:
2513 module_put(THIS_MODULE);
2514 out:
2515 pr_info("error %s: %s", path, err);
2516 return ret;
If some error happens and the above code path is executed, at line 2511
path is released, but referenced at line 2515. Then KASAN reports a use-
after-free error message.
This patch changes line 2515 in the following way to fix the problem,
2515 pr_info("error %s: %s", path?path:"", err);
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50246693f8 ]
Split the successful and error return path, and use one goto label for each
resource to unwind. This also fixes some small errors like leaking the
module reference count in the reboot case (which seems entirely harmless)
or printing the wrong warning messages for early failures.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8547d4209 ]
Same as cache device, the buffer page needs to be put while
freeing cached_dev. Otherwise a page would be leaked every
time a cached_dev is stopped.
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 873937e75f ]
The existing code allows changing the data device when the thin-pool
target is reloaded.
This capability is not required and only complicates device lifetime
guarantees. This can cause crashes like the one reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=1788596
where the kernel tries to issue a flush bio located in a structure that
was already freed.
Take the first step to simplifying the thin-pool's data device lifetime
by disallowing changing it. Like the thin-pool's metadata device, the
data device is now set in pool_create() and it cannot be changed for a
given thin-pool.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43f3952a51 ]
raid_status() wasn't emitting rebuild flags on the table line properly
because the rdev number was not yet set properly; index raid component
devices array directly to solve.
Also fix wrong argument count on emitted table line caused by 1 too
many rebuild/write_mostly argument and consider any journal_(dev|mode)
pairs.
Link: https://bugzilla.redhat.com/1782045
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2aa8c52938 upstream.
the commit 91be66e131 ("bcache: performance improvement for
btree_flush_write()") was an effort to flushing btree node with oldest
btree node faster in following methods,
- Only iterate dirty btree nodes in c->btree_cache, avoid scanning a lot
of clean btree nodes.
- Take c->btree_cache as a LRU-like list, aggressively flushing all
dirty nodes from tail of c->btree_cache util the btree node with
oldest journal entry is flushed. This is to reduce the time of holding
c->bucket_lock.
Guoju Fang and Shuang Li reported that they observe unexptected extra
write I/Os on cache device after applying the above patch. Guoju Fang
provideed more detailed diagnose information that the aggressive
btree nodes flushing may cause 10x more btree nodes to flush in his
workload. He points out when system memory is large enough to hold all
btree nodes in memory, c->btree_cache is not a LRU-like list any more.
Then the btree node with oldest journal entry is very probably not-
close to the tail of c->btree_cache list. In such situation much more
dirty btree nodes will be aggressively flushed before the target node
is flushed. When slow SATA SSD is used as cache device, such over-
aggressive flushing behavior will cause performance regression.
After spending a lot of time on debug and diagnose, I find the real
condition is more complicated, aggressive flushing dirty btree nodes
from tail of c->btree_cache list is not a good solution.
- When all btree nodes are cached in memory, c->btree_cache is not
a LRU-like list, the btree nodes with oldest journal entry won't
be close to the tail of the list.
- There can be hundreds dirty btree nodes reference the oldest journal
entry, before flushing all the nodes the oldest journal entry cannot
be reclaimed.
When the above two conditions mixed together, a simply flushing from
tail of c->btree_cache list is really NOT a good idea.
Fortunately there is still chance to make btree_flush_write() work
better. Here is how this patch avoids unnecessary btree nodes flushing,
- Only acquire c->journal.lock when getting oldest journal entry of
fifo c->journal.pin. In rested locations check the journal entries
locklessly, so their values can be changed on other cores
in parallel.
- In loop list_for_each_entry_safe_reverse(), checking latest front
point of fifo c->journal.pin. If it is different from the original
point which we get with locking c->journal.lock, it means the oldest
journal entry is reclaim on other cores. At this moment, all selected
dirty nodes recorded in array btree_nodes[] are all flushed and clean
on other CPU cores, it is unncessary to iterate c->btree_cache any
longer. Just quit the list_for_each_entry_safe_reverse() loop and
the following for-loop will skip all the selected clean nodes.
- Find a proper time to quit the list_for_each_entry_safe_reverse()
loop. Check the refcount value of orignial fifo front point, if the
value is larger than selected node number of btree_nodes[], it means
more matching btree nodes should be scanned. Otherwise it means no
more matching btee nodes in rest of c->btree_cache list, the loop
can be quit. If the original oldest journal entry is reclaimed and
fifo front point is updated, the refcount of original fifo front point
will be 0, then the loop will be quit too.
- Not hold c->bucket_lock too long time. c->bucket_lock is also required
for space allocation for cached data, hold it for too long time will
block regular I/O requests. When iterating list c->btree_cache, even
there are a lot of maching btree nodes, in order to not holding
c->bucket_lock for too long time, only BTREE_FLUSH_NR nodes are
selected and to flush in following for-loop.
With this patch, only btree nodes referencing oldest journal entry
are flushed to cache device, no aggressive flushing for unnecessary
btree node any more. And in order to avoid blocking regluar I/O
requests, each time when btree_flush_write() called, at most only
BTREE_FLUSH_NR btree nodes are selected to flush, even there are more
maching btree nodes in list c->btree_cache.
At last, one more thing to explain: Why it is safe to read front point
of c->journal.pin without holding c->journal.lock inside the
list_for_each_entry_safe_reverse() loop ?
Here is my answer: When reading the front point of fifo c->journal.pin,
we don't need to know the exact value of front point, we just want to
check whether the value is different from the original front point
(which is accurate value because we get it while c->jouranl.lock is
held). For such purpose, it works as expected without holding
c->journal.lock. Even the front point is changed on other CPU core and
not updated to local core, and current iterating btree node has
identical journal entry local as original fetched fifo front point, it
is still safe. Because after holding mutex b->write_lock (with memory
barrier) this btree node can be found as clean and skipped, the loop
will quite latter when iterate on next node of list c->btree_cache.
Fixes: 91be66e131 ("bcache: performance improvement for btree_flush_write()")
Reported-by: Guoju Fang <fangguoju@gmail.com>
Reported-by: Shuang Li <psymon@bonuscloud.io>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 038ba8cc1b upstream.
In year 2007 high performance SSD was still expensive, in order to
save more space for real workload or meta data, the readahead I/Os
for non-meta data was bypassed and not cached on SSD.
In now days, SSD price drops a lot and people can find larger size
SSD with more comfortable price. It is unncessary to alway bypass
normal readahead I/Os to save SSD space for now.
This patch adds options for readahead data cache policies via sysfs
file /sys/block/bcache<N>/readahead_cache_policy, the options are,
- "all": cache all readahead data I/Os.
- "meta-only": only cache meta data, and bypass other regular I/Os.
If users want to make bcache continue to only cache readahead request
for metadata and bypass regular data readahead, please set "meta-only"
to this sysfs file. By default, bcache will back to cache all read-
ahead requests now.
Cc: stable@vger.kernel.org
Signed-off-by: Coly Li <colyli@suse.de>
Acked-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47ace7e012 upstream.
Move blk_queue_make_request() to dm.c:alloc_dev() so that
q->make_request_fn is never NULL during the lifetime of a DM device
(even one that is created without a DM table).
Otherwise generic_make_request() will crash simply by doing:
dmsetup create -n test
mount /dev/dm-N /mnt
While at it, move ->congested_data initialization out of
dm.c:alloc_dev() and into the bio-based specific init method.
Reported-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/1860231
Fixes: ff36ab3458 ("dm: remove request-based logic from make_request_fn wrapper")
Depends-on: c12c9a3c38 ("dm: various cleanups to md->queue initialization code")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4a8d28658 upstream.
dm-thin uses struct pool to hold the state of the pool. There may be
multiple pool_c's pointing to a given pool, each pool_c represents a
loaded target. pool_c's may be created and destroyed arbitrarily and the
pool contains a reference count of pool_c's pointing to it.
Since commit 694cfe7f31 ("dm thin: Flush data device before
committing metadata") a pointer to pool_c is passed to
dm_pool_register_pre_commit_callback and this function stores it in
pmd->pre_commit_context. If this pool_c is freed, but pool is not
(because there is another pool_c referencing it), we end up in a
situation where pmd->pre_commit_context structure points to freed
pool_c. It causes a crash in metadata_pre_commit_callback.
Fix this by moving the dm_pool_register_pre_commit_callback() from
pool_ctr() to pool_preresume(). This way the in-core thin-pool metadata
is only ever armed with callback data whose lifetime matches the
active thin-pool target.
In should be noted that this fix preserves the ability to load a
thin-pool table that uses a different data block device (that contains
the same data) -- though it is unclear if that capability is still
useful and/or needed.
Fixes: 694cfe7f31 ("dm thin: Flush data device before committing metadata")
Cc: stable@vger.kernel.org
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44d8ebf436 upstream.
Ensure that the pool is locked during calls to __commit_transaction and
__destroy_persistent_data_objects. Just being consistent with locking,
but reality is dm_pool_metadata_close is called once pool is being
destroyed so access to pool shouldn't be contended.
Also, use pmd_write_lock_in_core rather than __pmd_write_lock in
dm_pool_commit_metadata and rename __pmd_write_lock to
pmd_write_lock_in_core -- there was no need for the alias.
In addition, verify that the pool is locked in __commit_transaction().
Fixes: 873f258bec ("dm thin metadata: do not write metadata if no changes occurred")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9402e95901 upstream.
GFP_KERNEL is not supposed to be or'd with GFP_NOFS (the result is
equivalent to GFP_KERNEL). Also, we use GFP_NOIO instead of GFP_NOFS
because we don't want any I/O being submitted in the direct reclaim
path.
Fixes: 39d13a1ac4 ("dm crypt: reuse eboiv skcipher for IV generation")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa9509209c upstream.
When committing state, the function writecache_flush does the following:
1. write metadata (writecache_commit_flushed)
2. flush disk cache (writecache_commit_flushed)
3. wait for data writes to complete (writecache_wait_for_ios)
4. increase superblock seq_count
5. write the superblock
6. flush disk cache
It may happen that at step 3, when we wait for some write to finish, the
disk may report the write as finished, but the write only hit the disk
cache and it is not yet stored in persistent storage. At step 5 we write
the superblock - it may happen that the superblock is written before the
write that we waited for in step 3. If the machine crashes, it may result
in incorrect data being returned after reboot.
In order to fix the bug, we must swap steps 2 and 3 in the above sequence,
so that we first wait for writes to complete and then flush the disk
cache.
Fixes: 48debafe4f ("dm: add writecache target")
Cc: stable@vger.kernel.org # 4.18+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4feaef830d upstream.
The space-maps track the reference counts for disk blocks allocated by
both the thin-provisioning and cache targets. There are variants for
tracking metadata blocks and data blocks.
Transactionality is implemented by never touching blocks from the
previous transaction, so we can rollback in the event of a crash.
When allocating a new block we need to ensure the block is free (has
reference count of 0) in both the current and previous transaction.
Prior to this fix we were doing this by searching for a free block in
the previous transaction, and relying on a 'begin' counter to track
where the last allocation in the current transaction was. This
'begin' field was not being updated in all code paths (eg, increment
of a data block reference count due to breaking sharing of a neighbour
block in the same btree leaf).
This fix keeps the 'begin' field, but now it's just a hint to speed up
the search. Instead the current transaction is searched for a free
block, and then the old transaction is double checked to ensure it's
free. Much simpler.
This fixes reports of sm_disk_new_block()'s BUG_ON() triggering when
DM thin-provisioning's snapshots are heavily used.
Reported-by: Eric Wheeler <dm-devel@lists.ewheeler.net>
Cc: stable@vger.kernel.org
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b399629503 upstream.
dm-zoned is observed to log failed kernel assertions and not work
correctly when operating against a device with a zone size smaller
than 128MiB (e.g. 32768 bits per 4K block). The reason is that the
bitmap size per zone is calculated as zero with such a small zone
size. Fix this problem and also make the code related to zone bitmap
management be able to handle per zone bitmaps smaller than a single
block.
A dm-zoned-tools patch is required to properly format dm-zoned devices
with zone sizes smaller than 128MiB.
Fixes: 3b1a94c88b ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Logical block size has type unsigned short. That means that it can be at
most 32768. However, there are architectures that can run with 64k pages
(for example arm64) and on these architectures, it may be possible to
create block devices with 64k block size.
For exmaple (run this on an architecture with 64k pages):
Mount will fail with this error because it tries to read the superblock using 2-sector
access:
device-mapper: writecache: I/O is not aligned, sector 2, size 1024, block size 65536
EXT4-fs (dm-0): unable to read superblock
This patch changes the logical block size from unsigned short to unsigned
int to avoid the overflow.
Cc: stable@vger.kernel.org
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=hmxJ
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20191212' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- stable fix for the bi_size overflow. Not a corruption issue, but a
case wher we could merge but disallowed (Andreas)
- NVMe pull request via Keith, with various fixes.
- MD pull request from Song.
- Merge window regression fix for the rq passthrough stats (Logan)
- Remove unused blkcg_drain_queue() function (Guoqing)
* tag 'for-linus-20191212' of git://git.kernel.dk/linux-block:
blk-cgroup: remove blkcg_drain_queue
block: fix NULL pointer dereference in account statistics with IDE
md: make sure desc_nr less than MD_SB_DISKS
md: raid1: check rdev before reference in raid1_sync_request func
raid5: need to set STRIPE_HANDLE for batch head
block: fix "check bi_size overflow before merge"
nvme/pci: Fix read queue count
nvme/pci Limit write queue sizes to possible cpus
nvme/pci: Fix write and poll queue types
nvme/pci: Remove last_cq_head
nvme: Namepace identification descriptor list is optional
nvme-fc: fix double-free scenarios on hw queues
nvme: else following return is not needed
nvme: add error message on mismatching controller ids
nvme_fc: add module to ops template to allow module references
nvmet-loop: Avoid preallocating big SGL for data
nvme-fc: Avoid preallocating big SGL for data
nvme-rdma: Avoid preallocating big SGL for data
bio-based configurations that don't haave a SCSI device handler.
- Fix dm-btree removal to ensure non-root btree nodes have at least
(max_entries / 3) entries. This resolves userspace thin_check
utility's report of "too few entries in btree_node".
- Fix both the DM thin-provisioning and dm-clone targets to properly
flush the data device prior to metadata commit. This resolves the
potential for inconsistency across a power loss event when the data
device has a volatile writeback cache.
- Small documentation fixes to dm-clone and dm-integrity.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl3yU6sTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWvO9B/0dsIxL09sWSHPe+wuzy7WXAOCHVm04
27dloxNzgXGFT5ftvU+JpLParOtDfJ2ral2BVGExjGzMs4QP8ZLrn5UuTFuR7nXi
FDaypaCelRsh1/204bKDgb22vaZIAZFu7Rz2YsAzWqpCJZDjN5cgy9xz4GmCvXRt
R13Qq8Dia4scR/y+xCkm5s4wH2xGz1CDmpSPzbLTpTfkMfY5yzp6Gzaipj4Fwq78
dDERNZNuabVr2o8mt8OGd/s1h4QtiJps1J8NV2He5C3Bf8daaFVkHDCl75+P2KQC
++VaIS/l1TfcOyDJmoztg7w2gmLkTxEskVpN/UQD/Ut9D5m7P9S7uaQg
=6t9f
-----END PGP SIGNATURE-----
Merge tag 'for-5.5/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM multipath by restoring full path selector functionality for
bio-based configurations that don't haave a SCSI device handler.
- Fix dm-btree removal to ensure non-root btree nodes have at least
(max_entries / 3) entries. This resolves userspace thin_check
utility's report of "too few entries in btree_node".
- Fix both the DM thin-provisioning and dm-clone targets to properly
flush the data device prior to metadata commit. This resolves the
potential for inconsistency across a power loss event when the data
device has a volatile writeback cache.
- Small documentation fixes to dm-clone and dm-integrity.
* tag 'for-5.5/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
docs: dm-integrity: remove reference to ARC4
dm thin: Flush data device before committing metadata
dm thin metadata: Add support for a pre-commit callback
dm clone: Flush destination device before committing metadata
dm clone metadata: Use a two phase commit
dm clone metadata: Track exact changes per transaction
dm btree: increase rebalance threshold in __rebalance2()
dm: add dm-clone to the documentation index
dm mpath: remove harmful bio-based optimization
For super_90_load, we need to make sure 'desc_nr' less
than MD_SB_DISKS, avoiding invalid memory access of 'sb->disks'.
Fixes: 228fc7d76d ("md: avoid invalid memory access for array sb->dev_roles")
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
In raid1_sync_request func, rdev should be checked before reference.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
With commit 6ce220dd2f ("raid5: don't set
STRIPE_HANDLE to stripe which is in batch list"), we don't want to set
STRIPE_HANDLE flag for sh which is already in batch list.
However, the stripe which is the head of batch list should set this flag,
otherwise panic could happen inside init_stripe at BUG_ON(sh->batch_head),
it is reproducible with raid5 on top of nvdimm devices per Xiao oberserved.
Thanks for Xiao's effort to verify the change.
Fixes: 6ce220dd2f ("raid5: don't set STRIPE_HANDLE to stripe which is in batch list")
Reported-by: Xiao Ni <xni@redhat.com>
Tested-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except
at places where these are defined. Later patches will remove the unused
definition of FIELD_SIZEOF().
This patch is generated using following script:
EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h"
git grep -l -e "\bFIELD_SIZEOF\b" | while read file;
do
if [[ "$file" =~ $EXCLUDE_FILES ]]; then
continue
fi
sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file;
done
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David Miller <davem@davemloft.net> # for net
The thin provisioning target maintains per thin device mappings that map
virtual blocks to data blocks in the data device.
When we write to a shared block, in case of internal snapshots, or
provision a new block, in case of external snapshots, we copy the shared
block to a new data block (COW), update the mapping for the relevant
virtual block and then issue the write to the new data block.
Suppose the data device has a volatile write-back cache and the
following sequence of events occur:
1. We write to a shared block
2. A new data block is allocated
3. We copy the shared block to the new data block using kcopyd (COW)
4. We insert the new mapping for the virtual block in the btree for that
thin device.
5. The commit timeout expires and we commit the metadata, that now
includes the new mapping from step (4).
6. The system crashes and the data device's cache has not been flushed,
meaning that the COWed data are lost.
The next time we read that virtual block of the thin device we read it
from the data block allocated in step (2), since the metadata have been
successfully committed. The data are lost due to the crash, so we read
garbage instead of the old, shared data.
This has the following implications:
1. In case of writes to shared blocks, with size smaller than the pool's
block size (which means we first copy the whole block and then issue
the smaller write), we corrupt data that the user never touched.
2. In case of writes to shared blocks, with size equal to the device's
logical block size, we fail to provide atomic sector writes. When the
system recovers the user will read garbage from that sector instead
of the old data or the new data.
3. Even for writes to shared blocks, with size equal to the pool's block
size (overwrites), after the system recovers, the written sectors
will contain garbage instead of a random mix of sectors containing
either old data or new data, thus we fail again to provide atomic
sectors writes.
4. Even when the user flushes the thin device, because we first commit
the metadata and then pass down the flush, the same risk for
corruption exists (if the system crashes after the metadata have been
committed but before the flush is passed down to the data device.)
The only case which is unaffected is that of writes with size equal to
the pool's block size and with the FUA flag set. But, because FUA writes
trigger metadata commits, this case can trigger the corruption
indirectly.
Moreover, apart from internal and external snapshots, the same issue
exists for newly provisioned blocks, when block zeroing is enabled.
After the system recovers the provisioned blocks might contain garbage
instead of zeroes.
To solve this and avoid the potential data corruption we flush the
pool's data device **before** committing its metadata.
This ensures that the data blocks of any newly inserted mappings are
properly written to non-volatile storage and won't be lost in case of a
crash.
Cc: stable@vger.kernel.org
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add support for one pre-commit callback which is run right before the
metadata are committed.
This allows the thin provisioning target to run a callback before the
metadata are committed and is required by the next commit.
Cc: stable@vger.kernel.org
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm-clone maintains an on-disk bitmap which records which regions are
valid in the destination device, i.e., which regions have already been
hydrated, or have been written to directly, via user I/O.
Setting a bit in the on-disk bitmap meas the corresponding region is
valid in the destination device and we redirect all I/O regarding it to
the destination device.
Suppose the destination device has a volatile write-back cache and the
following sequence of events occur:
1. A region gets hydrated, either through the background hydration or
because it was written to directly, via user I/O.
2. The commit timeout expires and we commit the metadata, marking that
region as valid in the destination device.
3. The system crashes and the destination device's cache has not been
flushed, meaning the region's data are lost.
The next time we read that region we read it from the destination
device, since the metadata have been successfully committed, but the
data are lost due to the crash, so we read garbage instead of the old
data.
This has several implications:
1. In case of background hydration or of writes with size smaller than
the region size (which means we first copy the whole region and then
issue the smaller write), we corrupt data that the user never
touched.
2. In case of writes with size equal to the device's logical block size,
we fail to provide atomic sector writes. When the system recovers the
user will read garbage from the sector instead of the old data or the
new data.
3. In case of writes without the FUA flag set, after the system
recovers, the written sectors will contain garbage instead of a
random mix of sectors containing either old data or new data, thus we
fail again to provide atomic sector writes.
4. Even when the user flushes the dm-clone device, because we first
commit the metadata and then pass down the flush, the same risk for
corruption exists (if the system crashes after the metadata have been
committed but before the flush is passed down).
The only case which is unaffected is that of writes with size equal to
the region size and with the FUA flag set. But, because FUA writes
trigger metadata commits, this case can trigger the corruption
indirectly.
To solve this and avoid the potential data corruption we flush the
destination device **before** committing the metadata.
This ensures that any freshly hydrated regions, for which we commit the
metadata, are properly written to non-volatile storage and won't be lost
in case of a crash.
Fixes: 7431b7835f ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Split the metadata commit in two parts:
1. dm_clone_metadata_pre_commit(): Prepare the current transaction for
committing. After this is called, all subsequent metadata updates,
done through either dm_clone_set_region_hydrated() or
dm_clone_cond_set_range(), will be part of the next transaction.
2. dm_clone_metadata_commit(): Actually commit the current transaction
to disk and start a new transaction.
This is required by the following commit. It allows dm-clone to flush
the destination device after step (1) to ensure that all freshly
hydrated regions, for which we are updating the metadata, are properly
written to non-volatile storage and won't be lost in case of a crash.
Fixes: 7431b7835f ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Extend struct dirty_map with a second bitmap which tracks the exact
regions that were hydrated during the current metadata transaction.
Moreover, fix __flush_dmap() to only commit the metadata of the regions
that were hydrated during the current transaction.
This is required by the following commits to fix a data corruption bug.
Fixes: 7431b7835f ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
We got the following warnings from thin_check during thin-pool setup:
$ thin_check /dev/vdb
examining superblock
examining devices tree
missing devices: [1, 84]
too few entries in btree_node: 41, expected at least 42 (block 138, max_entries = 126)
examining mapping tree
The phenomenon is the number of entries in one node of details_info tree is
less than (max_entries / 3). And it can be easily reproduced by the following
procedures:
$ new a thin pool
$ presume the max entries of details_info tree is 126
$ new 127 thin devices (e.g. 1~127) to make the root node being full
and then split
$ remove the first 43 (e.g. 1~43) thin devices to make the children
reblance repeatedly
$ stop the thin pool
$ thin_check
The root cause is that the B-tree removal procedure in __rebalance2()
doesn't guarantee the invariance: the minimal number of entries in
non-root node should be >= (max_entries / 3).
Simply fix the problem by increasing the rebalance threshold to
make sure the number of entries in each child will be greater
than or equal to (max_entries / 3 + 1), so no matter which
child is used for removal, the number will still be valid.
Cc: stable@vger.kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
bio based drivers only need to update q->nr_zones. Do that manually
instead of overloading blk_revalidate_disk_zones to keep that function
simpler for the next round of changes that will rely even more on the
request based functionality.
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Simplify the arguments to blkdev_nr_zones by passing a gendisk instead
of the block_device and capacity. This also removes the need for
__blkdev_nr_zones as all callers are outside the fast path and can
deal with the additional branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Removes the branching for edge-case where no SCSI device handler
exists. The __map_bio_fast() method was far too limited, by only
selecting a new pathgroup or path IFF there was a path failure, fix this
be eliminating it in favor of __map_bio(). __map_bio()'s extra SCSI
device handler specific MPATHF_PG_INIT_REQUIRED test is not in the fast
path anyway.
This change restores full path selector functionality for bio-based
configurations that don't haave a SCSI device handler. But it should be
noted that the path selectors do have an impact on performance for
certain networks that are extremely fast (and don't require frequent
switching).
Fixes: 8d47e65948 ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks")
Cc: stable@vger.kernel.org
Reported-by: Drew Hastings <dhastings@crucialwebhost.com>
Suggested-by: Martin Wilck <mwilck@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
- Fix DM raid target to properly resync raidset even if bitmap needed
additional pages.
- Fix DM crypt performance regression due to use of WQ_HIGHPRI for the
IO and crypt workqueues.
- Fix DM integrity metadata layout that was aligned on 128K boundary
rather than the intended 4K boundary (removes 124K of wasted space for
each metadata block).
- Improve the DM thin, cache and clone targets to use spin_lock_irq
rather than spin_lock_irqsave where possible.
- Fix DM thin single thread performance that was lost due to needless
workqueue wakeups.
- Fix DM zoned target performance that was lost due to excessive backing
device checks.
- Add ability to trigger write failure with the DM dust test target.
- Fix whitespace indentation in drivers/md/Kconfig.
- Various smalls fixes and cleanups (e.g. use struct_size, fix
uninitialized variable, variable renames, etc).
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl3X/uUTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWv4PCACAIapkVx6A+MCQMT1lFJ9Ad5RRE0jb
xKjvte0KKozIsrabkLeRS/fOi6IVJwfdyF+rI5Q5BNxh6IzLrxvKvtcSatYyxY+O
hd/ijcgntE7UBXU99nesBG9Vax66EXeAkXUU+UJWkijrIPikxAc62zkpl4KwK4c2
sVHRu7g7avYKSeN/CUl18WIPXKVGmKbKTUtWNd/R46V37y27EwNP2NXUGwQcrCHR
G5TJBJIl3UL2nB14LbvbZ8+0nwLjiFgc6SJK72bTJwLOVQFA+0KrqxIejqtRxlGR
fsEq9zfbm+9VdsQMESGYKAI89diq26uCLYBmBQe7OtJc7HBdBN0/Wkbe
=CiR7
-----END PGP SIGNATURE-----
Merge tag 'for-5.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fix DM core to disallow stacking request-based DM on partitions.
- Fix DM raid target to properly resync raidset even if bitmap needed
additional pages.
- Fix DM crypt performance regression due to use of WQ_HIGHPRI for the
IO and crypt workqueues.
- Fix DM integrity metadata layout that was aligned on 128K boundary
rather than the intended 4K boundary (removes 124K of wasted space
for each metadata block).
- Improve the DM thin, cache and clone targets to use spin_lock_irq
rather than spin_lock_irqsave where possible.
- Fix DM thin single thread performance that was lost due to needless
workqueue wakeups.
- Fix DM zoned target performance that was lost due to excessive
backing device checks.
- Add ability to trigger write failure with the DM dust test target.
- Fix whitespace indentation in drivers/md/Kconfig.
- Various smalls fixes and cleanups (e.g. use struct_size, fix
uninitialized variable, variable renames, etc).
* tag 'for-5.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits)
Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"
dm: Fix Kconfig indentation
dm thin: wakeup worker only when deferred bios exist
dm integrity: fix excessive alignment of metadata runs
dm raid: Remove unnecessary negation of a shift in raid10_format_to_md_layout
dm zoned: reduce overhead of backing device checks
dm dust: add limited write failure mode
dm dust: change ret to r in dust_map_read and dust_map
dm dust: change result vars to r
dm cache: replace spin_lock_irqsave with spin_lock_irq
dm bio prison: replace spin_lock_irqsave with spin_lock_irq
dm thin: replace spin_lock_irqsave with spin_lock_irq
dm clone: add bucket_lock_irq/bucket_unlock_irq helpers
dm clone: replace spin_lock_irqsave with spin_lock_irq
dm writecache: handle REQ_FUA
dm writecache: fix uninitialized variable warning
dm stripe: use struct_size() in kmalloc()
dm raid: streamline rs_get_progress() and its raid_status() caller side
dm raid: simplify rs_setup_recovery call chain
dm raid: to ensure resynchronization, perform raid set grow in preresume
...
-----BEGIN PGP SIGNATURE-----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=/G9l
-----END PGP SIGNATURE-----
Merge tag 'for-5.5/zoned-20191122' of git://git.kernel.dk/linux-block
Pull zoned block device update from Jens Axboe:
"Enhancements and improvements to the zoned device support"
* tag 'for-5.5/zoned-20191122' of git://git.kernel.dk/linux-block:
scsi: sd_zbc: Remove set but not used variable 'buflen'
block: rework zone reporting
scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()
null_blk: Add zone_nr_conv to features
null_blk: clean up report zones
null_blk: clean up the block device operations
block: Remove partition support for zoned block devices
block: Simplify report zones execution
block: cleanup the !zoned case in blk_revalidate_disk_zones
block: Enhance blk_revalidate_disk_zones()
-----BEGIN PGP SIGNATURE-----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=i0jf
-----END PGP SIGNATURE-----
Merge tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Here are the main block driver updates for 5.5. Nothing major in here,
mostly just fixes. This contains:
- a set of bcache changes via Coly
- MD changes from Song
- loop unmap write-zeroes fix (Darrick)
- spelling fixes (Geert)
- zoned additions cleanups to null_blk/dm (Ajay)
- allow null_blk online submit queue changes (Bart)
- NVMe changes via Keith, nothing major here either"
* tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block: (56 commits)
Revert "bcache: fix fifo index swapping condition in journal_pin_cmp()"
drivers/md/raid5-ppl.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
drivers/md/raid5.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
bcache: don't export symbols
bcache: remove the extra cflags for request.o
bcache: at least try to shrink 1 node in bch_mca_scan()
bcache: add idle_max_writeback_rate sysfs interface
bcache: add code comments in bch_btree_leaf_dirty()
bcache: fix deadlock in bcache_allocator
bcache: add code comment bch_keylist_pop() and bch_keylist_pop_front()
bcache: deleted code comments for dead code in bch_data_insert_keys()
bcache: add more accurate error messages in read_super()
bcache: fix static checker warning in bcache_device_free()
bcache: fix a lost wake-up problem caused by mca_cannibalize_lock
bcache: fix fifo index swapping condition in journal_pin_cmp()
md/raid10: prevent access of uninitialized resync_pages offset
md: avoid invalid memory access for array sb->dev_roles
md/raid1: avoid soft lockup under high load
null_blk: add zone open, close, and finish support
dm: add zone open, close and finish support
...
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Coly says:
"Guoju Fang talked to me today, he told me this change was unnecessary
and I was over-thought.
Then I realize fifo_idx() uses a mask to handle the array index overflow
condition, so the index swap in journal_pin_cmp() won't happen. And yes,
Guoju and Kent are correct.
Since you already applied this patch, can you please to remove this
patch from your for-next branch? This single patch does not break
thing, but it is unecessary at this moment."
This reverts commit c0e0954e90.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Single thread fio test (read, bs=4k, ioengine=libaio, iodepth=128,
numjobs=1) over dm-thin device has poor performance versus bare nvme
device.
Further investigation with perf indicates that queue_work_on() consumes
over 20% CPU time when doing IO over dm-thin device. The call stack is
as follows.
- 40.57% thin_map
+ 22.07% queue_work_on
+ 9.95% dm_thin_find_block
+ 2.80% cell_defer_no_holder
1.91% inc_all_io_entry.isra.33.part.34
+ 1.78% bio_detain.isra.35
In cell_defer_no_holder(), wakeup_worker() is always called, no matter
whether the tc->deferred_bio_list list is empty or not. In single thread
IO model, this list is most likely empty. So skip waking up worker thread
if tc->deferred_bio_list list is empty.
Single thread IO performance improves from 448 MiB/s to 646 MiB/s (+44%)
once the needless wake_worker() calls are properly skipped.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Metadata runs are supposed to be aligned on 4k boundary (so that they work
efficiently with disks with 4k sectors). However, there was a programming
bug that makes them aligned on 128k boundary instead. The unused space is
wasted.
Fix this bug by providing a proper 4k alignment. In order to keep
existing volumes working, we introduce a new flag SB_FLAG_FIXED_PADDING
- when the flag is clear, we calculate the padding the old way. In order
to make sure that the old version cannot mount the volume created by the
new version, we increase superblock version to 4.
Also in order to not break with old integritysetup, we fix alignment
only if the parameter "fix_padding" is present when formatting the
device.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
As it is consistent with prefixes of other write life time hints.
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
As it is consistent with prefixes of other write life time hints.
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
None of the exported bcache symbols are actually used anywhere.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no block directory this file needs includes from.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In bch_mca_scan(), the number of shrinking btree node is calculated
by code like this,
unsigned long nr = sc->nr_to_scan;
nr /= c->btree_pages;
nr = min_t(unsigned long, nr, mca_can_free(c));
variable sc->nr_to_scan is number of objects (here is bcache B+tree
nodes' number) to shrink, and pointer variable sc is sent from memory
management code as parametr of a callback.
If sc->nr_to_scan is smaller than c->btree_pages, after the above
calculation, variable 'nr' will be 0 and nothing will be shrunk. It is
frequeently observed that only 1 or 2 is set to sc->nr_to_scan and make
nr to be zero. Then bch_mca_scan() will do nothing more then acquiring
and releasing mutex c->bucket_lock.
This patch checkes whether nr is 0 after the above calculation, if 0
is the result then set 1 to variable 'n'. Then at least bch_mca_scan()
will try to shrink a single B+tree node.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For writeback mode, if there is no regular I/O request for a while,
the writeback rate will be set to the maximum value (1TB/s for now).
This is good for most of the storage workload, but there are still
people don't what the maximum writeback rate in I/O idle time.
This patch adds a sysfs interface file idle_max_writeback_rate to
permit people to disable maximum writeback rate. Then the minimum
writeback rate can be advised by writeback_rate_minimum in the
bcache device's sysfs interface.
Reported-by: Christian Balzer <chibi@gol.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds code comments in bch_btree_leaf_dirty() to explain
why w->journal should always reference the eldest journal pin of
all the writing bkeys in the btree node. To make the bcache journal
code to be easier to be understood.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
