commit 090f612756 upstream.
The code is slightly reformatted to consistently check field availability
without duplication.
Fixes: 556bdf27c2 ("ntfs3: Add bounds checking to mi_enum_attr()")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit dfe6c5692f ("ocfs2: fix the la space leak when
unmounting an ocfs2 volume").
In commit dfe6c5692f, the commit log "This bug has existed since the
initial OCFS2 code." is wrong. The correct introduction commit is
30dd3478c3 ("ocfs2: correctly use ocfs2_find_next_zero_bit()").
The influence of commit dfe6c5692f is that it provides a correct
fix for the latest kernel. however, it shouldn't be pushed to stable
branches. Let's use this commit to revert all branches that include
dfe6c5692f and use a new fix method to fix commit 30dd3478c3.
Fixes: dfe6c5692f ("ocfs2: fix the la space leak when unmounting an ocfs2 volume")
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b29bf7119d upstream.
The fix for a memory corruption contained a off-by-one error and
caused the compressor to fail in legit cases.
Cc: Kinsey Moore <kinsey.moore@oarcorp.com>
Cc: stable@vger.kernel.org
Fixes: fe051552f5 ("jffs2: Prevent rtime decompress memory corruption")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe051552f5 upstream.
The rtime decompression routine does not fully check bounds during the
entirety of the decompression pass and can corrupt memory outside the
decompression buffer if the compressed data is corrupted. This adds the
required check to prevent this failure mode.
Cc: stable@vger.kernel.org
Signed-off-by: Kinsey Moore <kinsey.moore@oarcorp.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32f123a3f3 upstream.
udf_getblk() has a single call site. Fold it there.
Signed-off-by: Jan Kara <jack@suse.cz>
[acsjakub: backport-adjusting changes
udf_getblk() has changed between 6.1 and the backported commit, namely
in commit 541e047b14 ("udf: Use udf_map_block() in udf_getblk()")
Backport using the form of udf_getblk present in 6.1., that means use
udf_get_block() instead of udf_map_block() and use dummy in buffer_new()
and buffer_mapped(). ]
Closes: https://syzkaller.appspot.com/bug?extid=a38e34ca637c224f4a79
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 231825b2e1 ]
This reverts commit 5c26d2f1d3.
It turns out that we can't do this, because while the old behavior of
ignoring ignorable code points was most definitely wrong, we have
case-folding filesystems with on-disk hash values with that wrong
behavior.
So now you can't look up those names, because they hash to something
different.
Of course, it's also entirely possible that in the meantime people have
created *new* files with the new ("more correct") case folding logic,
and reverting will just make other things break.
The correct solution is to not do case folding in filesystems, but
sadly, people seem to never really understand that. People still see it
as a feature, not a bug.
Reported-by: Qi Han <hanqi@vivo.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219586
Cc: Gabriel Krisman Bertazi <krisman@suse.de>
Requested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c803c474c ]
When activating a swap file we acquire the root's snapshot drew lock and
then check if the root is dead, failing and returning with -EPERM if it's
dead but without unlocking the root's snapshot lock. Fix this by adding
the missing unlock.
Fixes: 60021bd754 ("btrfs: prevent subvol with swapfile from being deleted")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5c367ef82 ]
creating a large files during checkpoint disable until it runs out of
space and then delete it, then remount to enable checkpoint again, and
then unmount the filesystem triggers the f2fs_bug_on as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/inode.c:896!
CPU: 2 UID: 0 PID: 1286 Comm: umount Not tainted 6.11.0-rc7-dirty #360
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:f2fs_evict_inode+0x58c/0x610
Call Trace:
__die_body+0x15/0x60
die+0x33/0x50
do_trap+0x10a/0x120
f2fs_evict_inode+0x58c/0x610
do_error_trap+0x60/0x80
f2fs_evict_inode+0x58c/0x610
exc_invalid_op+0x53/0x60
f2fs_evict_inode+0x58c/0x610
asm_exc_invalid_op+0x16/0x20
f2fs_evict_inode+0x58c/0x610
evict+0x101/0x260
dispose_list+0x30/0x50
evict_inodes+0x140/0x190
generic_shutdown_super+0x2f/0x150
kill_block_super+0x11/0x40
kill_f2fs_super+0x7d/0x140
deactivate_locked_super+0x2a/0x70
cleanup_mnt+0xb3/0x140
task_work_run+0x61/0x90
The root cause is: creating large files during disable checkpoint
period results in not enough free segments, so when writing back root
inode will failed in f2fs_enable_checkpoint. When umount the file
system after enabling checkpoint, the root inode is dirty in
f2fs_evict_inode function, which triggers BUG_ON. The steps to
reproduce are as follows:
dd if=/dev/zero of=f2fs.img bs=1M count=55
mount f2fs.img f2fs_dir -o checkpoint=disable:10%
dd if=/dev/zero of=big bs=1M count=50
sync
rm big
mount -o remount,checkpoint=enable f2fs_dir
umount f2fs_dir
Let's redirty inode when there is not free segments during checkpoint
is disable.
Signed-off-by: Qi Han <hanqi@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f69b0187f8 ]
Like commit f1f047bd7c ("smb: client: Fix -Wstringop-overflow issues"),
adjust the memcpy() destination address to be based off the surrounding
object rather than based off the 4-byte "Protocol" member. This avoids a
build-time warning when compiling under CONFIG_FORTIFY_SOURCE with GCC 15:
In function 'fortify_memcpy_chk',
inlined from 'CIFSSMBSetPathInfo' at ../fs/smb/client/cifssmb.c:5358:2:
../include/linux/fortify-string.h:571:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
571 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70958a949d ]
If you follow the seed/sprout wiki, it suggests the following workflow:
btrfstune -S 1 seed_dev
mount seed_dev mnt
btrfs device add sprout_dev
mount -o remount,rw mnt
The first mount mounts the FS readonly, which results in not setting
BTRFS_FS_OPEN, and setting the readonly bit on the sb. The device add
somewhat surprisingly clears the readonly bit on the sb (though the
mount is still practically readonly, from the users perspective...).
Finally, the remount checks the readonly bit on the sb against the flag
and sees no change, so it does not run the code intended to run on
ro->rw transitions, leaving BTRFS_FS_OPEN unset.
As a result, when the cleaner_kthread runs, it sees no BTRFS_FS_OPEN and
does no work. This results in leaking deleted snapshots until we run out
of space.
I propose fixing it at the first departure from what feels reasonable:
when we clear the readonly bit on the sb during device add.
A new fstest I have written reproduces the bug and confirms the fix.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e8b6bc0ab ]
[PROBLEM]
It is very common for udev to trigger device scan, and every time a
mounted btrfs device got re-scan from different soft links, we will get
some of unnecessary device path updates, this is especially common
for LVM based storage:
# lvs
scratch1 test -wi-ao---- 10.00g
scratch2 test -wi-a----- 10.00g
scratch3 test -wi-a----- 10.00g
scratch4 test -wi-a----- 10.00g
scratch5 test -wi-a----- 10.00g
test test -wi-a----- 10.00g
# mkfs.btrfs -f /dev/test/scratch1
# mount /dev/test/scratch1 /mnt/btrfs
# dmesg -c
[ 205.705234] BTRFS: device fsid 7be2602f-9e35-4ecf-a6ff-9e91d2c182c9 devid 1 transid 6 /dev/mapper/test-scratch1 (253:4) scanned by mount (1154)
[ 205.710864] BTRFS info (device dm-4): first mount of filesystem 7be2602f-9e35-4ecf-a6ff-9e91d2c182c9
[ 205.711923] BTRFS info (device dm-4): using crc32c (crc32c-intel) checksum algorithm
[ 205.713856] BTRFS info (device dm-4): using free-space-tree
[ 205.722324] BTRFS info (device dm-4): checking UUID tree
So far so good, but even if we just touched any soft link of
"dm-4", we will get quite some unnecessary device path updates.
# touch /dev/mapper/test-scratch1
# dmesg -c
[ 469.295796] BTRFS info: devid 1 device path /dev/mapper/test-scratch1 changed to /dev/dm-4 scanned by (udev-worker) (1221)
[ 469.300494] BTRFS info: devid 1 device path /dev/dm-4 changed to /dev/mapper/test-scratch1 scanned by (udev-worker) (1221)
Such device path rename is unnecessary and can lead to random path
change due to the udev race.
[CAUSE]
Inside device_list_add(), we are using a very primitive way checking if
the device has changed, strcmp().
Which can never handle links well, no matter if it's hard or soft links.
So every different link of the same device will be treated as a different
device, causing the unnecessary device path update.
[FIX]
Introduce a helper, is_same_device(), and use path_equal() to properly
detect the same block device.
So that the different soft links won't trigger the rename race.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1230641
Reported-by: Fabian Vogt <fvogt@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 914eec5e98 upstream.
The following INFO level message was seen:
seq_file: buggy .next function ocfs2_dlm_seq_next [ocfs2] did not
update position index
Fix:
Update *pos (so m->index) to make seq_read_iter happy though the index its
self makes no sense to ocfs2_dlm_seq_next.
Link: https://lkml.kernel.org/r/20241119174500.9198-1-wen.gang.wang@oracle.com
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 985ebec4ab upstream.
Syzbot reported that when searching for records in a directory where the
inode's i_size is corrupted and has a large value, memory access outside
the folio/page range may occur, or a use-after-free bug may be detected if
KASAN is enabled.
This is because nilfs_last_byte(), which is called by nilfs_find_entry()
and others to calculate the number of valid bytes of directory data in a
page from i_size and the page index, loses the upper 32 bits of the 64-bit
size information due to an inappropriate type of local variable to which
the i_size value is assigned.
This caused a large byte offset value due to underflow in the end address
calculation in the calling nilfs_find_entry(), resulting in memory access
that exceeds the folio/page size.
Fix this issue by changing the type of the local variable causing the bit
loss from "unsigned int" to "u64". The return value of nilfs_last_byte()
is also of type "unsigned int", but it is truncated so as not to exceed
PAGE_SIZE and no bit loss occurs, so no change is required.
Link: https://lkml.kernel.org/r/20241119172403.9292-1-konishi.ryusuke@gmail.com
Fixes: 2ba466d74e ("nilfs2: directory entry operations")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+96d5d14c47d97015c624@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=96d5d14c47d97015c624
Tested-by: syzbot+96d5d14c47d97015c624@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 313dab0822 upstream.
An offset from client could be a negative value, It could allows
to write data outside the bounds of the allocated buffer.
Note that this issue is coming when setting
'vfs objects = streams_xattr parameter' in ksmbd.conf.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Jordy Zomer <jordyzomer@google.com>
Signed-off-by: Jordy Zomer <jordyzomer@google.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc342cf86e upstream.
An offset from client could be a negative value, It could lead
to an out-of-bounds read from the stream_buf.
Note that this issue is coming when setting
'vfs objects = streams_xattr parameter' in ksmbd.conf.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Jordy Zomer <jordyzomer@google.com>
Signed-off-by: Jordy Zomer <jordyzomer@google.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98100e88dd upstream.
The action force umount(umount -f) will attempt to kill all rpc_task even
umount operation may ultimately fail if some files remain open.
Consequently, if an action attempts to open a file, it can potentially
send two rpc_task to nfs server.
NFS CLIENT
thread1 thread2
open("file")
...
nfs4_do_open
_nfs4_do_open
_nfs4_open_and_get_state
_nfs4_proc_open
nfs4_run_open_task
/* rpc_task1 */
rpc_run_task
rpc_wait_for_completion_task
umount -f
nfs_umount_begin
rpc_killall_tasks
rpc_signal_task
rpc_task1 been wakeup
and return -512
_nfs4_do_open // while loop
...
nfs4_run_open_task
/* rpc_task2 */
rpc_run_task
rpc_wait_for_completion_task
While processing an open request, nfsd will first attempt to find or
allocate an nfs4_openowner. If it finds an nfs4_openowner that is not
marked as NFS4_OO_CONFIRMED, this nfs4_openowner will released. Since
two rpc_task can attempt to open the same file simultaneously from the
client to server, and because two instances of nfsd can run
concurrently, this situation can lead to lots of memory leak.
Additionally, when we echo 0 to /proc/fs/nfsd/threads, warning will be
triggered.
NFS SERVER
nfsd1 nfsd2 echo 0 > /proc/fs/nfsd/threads
nfsd4_open
nfsd4_process_open1
find_or_alloc_open_stateowner
// alloc oo1, stateid1
nfsd4_open
nfsd4_process_open1
find_or_alloc_open_stateowner
// find oo1, without NFS4_OO_CONFIRMED
release_openowner
unhash_openowner_locked
list_del_init(&oo->oo_perclient)
// cannot find this oo
// from client, LEAK!!!
alloc_stateowner // alloc oo2
nfsd4_process_open2
init_open_stateid
// associate oo1
// with stateid1, stateid1 LEAK!!!
nfs4_get_vfs_file
// alloc nfsd_file1 and nfsd_file_mark1
// all LEAK!!!
nfsd4_process_open2
...
write_threads
...
nfsd_destroy_serv
nfsd_shutdown_net
nfs4_state_shutdown_net
nfs4_state_destroy_net
destroy_client
__destroy_client
// won't find oo1!!!
nfsd_shutdown_generic
nfsd_file_cache_shutdown
kmem_cache_destroy
for nfsd_file_slab
and nfsd_file_mark_slab
// bark since nfsd_file1
// and nfsd_file_mark1
// still alive
=======================================================================
BUG nfsd_file (Not tainted): Objects remaining in nfsd_file on
__kmem_cache_shutdown()
-----------------------------------------------------------------------
Slab 0xffd4000004438a80 objects=34 used=1 fp=0xff11000110e2ad28
flags=0x17ffffc0000240(workingset|head|node=0|zone=2|lastcpupid=0x1fffff)
CPU: 4 UID: 0 PID: 757 Comm: sh Not tainted 6.12.0-rc6+ #19
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
slab_err+0xb0/0xf0
__kmem_cache_shutdown+0x15c/0x310
kmem_cache_destroy+0x66/0x160
nfsd_file_cache_shutdown+0xac/0x210 [nfsd]
nfsd_destroy_serv+0x251/0x2a0 [nfsd]
nfsd_svc+0x125/0x1e0 [nfsd]
write_threads+0x16a/0x2a0 [nfsd]
nfsctl_transaction_write+0x74/0xa0 [nfsd]
vfs_write+0x1ae/0x6d0
ksys_write+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Disabling lock debugging due to kernel taint
Object 0xff11000110e2ac38 @offset=3128
Allocated in nfsd_file_do_acquire+0x20f/0xa30 [nfsd] age=1635 cpu=3
pid=800
nfsd_file_do_acquire+0x20f/0xa30 [nfsd]
nfsd_file_acquire_opened+0x5f/0x90 [nfsd]
nfs4_get_vfs_file+0x4c9/0x570 [nfsd]
nfsd4_process_open2+0x713/0x1070 [nfsd]
nfsd4_open+0x74b/0x8b0 [nfsd]
nfsd4_proc_compound+0x70b/0xc20 [nfsd]
nfsd_dispatch+0x1b4/0x3a0 [nfsd]
svc_process_common+0x5b8/0xc50 [sunrpc]
svc_process+0x2ab/0x3b0 [sunrpc]
svc_handle_xprt+0x681/0xa20 [sunrpc]
nfsd+0x183/0x220 [nfsd]
kthread+0x199/0x1e0
ret_from_fork+0x31/0x60
ret_from_fork_asm+0x1a/0x30
Add nfs4_openowner_unhashed to help found unhashed nfs4_openowner, and
break nfsd4_open process to fix this problem.
Cc: stable@vger.kernel.org # v5.4+
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be8f982c36 upstream.
The function `e_show` was called with protection from RCU. This only
ensures that `exp` will not be freed. Therefore, the reference count for
`exp` can drop to zero, which will trigger a refcount use-after-free
warning when `exp_get` is called. To resolve this issue, use
`cache_get_rcu` to ensure that `exp` remains active.
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 3 PID: 819 at lib/refcount.c:25
refcount_warn_saturate+0xb1/0x120
CPU: 3 UID: 0 PID: 819 Comm: cat Not tainted 6.12.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
RIP: 0010:refcount_warn_saturate+0xb1/0x120
...
Call Trace:
<TASK>
e_show+0x20b/0x230 [nfsd]
seq_read_iter+0x589/0x770
seq_read+0x1e5/0x270
vfs_read+0x125/0x530
ksys_read+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: bf18f163e8 ("NFSD: Using exp_get for export getting")
Cc: stable@vger.kernel.org # 4.20+
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b6b99ef15 upstream.
dentry_open in ovl_security_fileattr fails for any file
larger than 2GB if open method of the underlying filesystem
calls generic_file_open (e.g. fusefs).
The issue can be reproduce using the following script:
(passthrough_ll is an example app from libfuse).
$ D=/opt/test/mnt
$ mkdir -p ${D}/{source,base,top/uppr,top/work,ovlfs}
$ dd if=/dev/zero of=${D}/source/zero.bin bs=1G count=2
$ passthrough_ll -o source=${D}/source ${D}/base
$ mount -t overlay overlay \
-olowerdir=${D}/base,upperdir=${D}/top/uppr,workdir=${D}/top/work \
${D}/ovlfs
$ chmod 0777 ${D}/mnt/ovlfs/zero.bin
Running this script results in "Value too large for defined data type"
error message from chmod.
Signed-off-by: Oleksandr Tymoshenko <ovt@google.com>
Fixes: 72db82115d ("ovl: copy up sync/noatime fileattr flags")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 088f294609 upstream.
If iov_iter_zero succeeds after failed copy_from_kernel_nofault,
we need to reset the ret value to zero otherwise it will be returned
as final return value of read_kcore_iter.
This fixes objdump -d dump over /proc/kcore for me.
Cc: stable@vger.kernel.org
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Fixes: 3d5854d75e ("fs/proc/kcore.c: allow translation of physical memory addresses")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20241121231118.3212000-1-jolsa@kernel.org
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 955710afcb upstream.
Previously, the "name" in the new device syntax "<name>@<fsid>.<fsname>"
was ignored because (presumably) tests were done using mount.ceph which
also passed the entity name using "-o name=foo". If mounting is done
without the mount.ceph helper, the new device id syntax fails to set
the name properly.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/68516
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3ed51857a5 ]
Syzbot reports a null-ptr-deref in btrfs_search_slot().
The reproducer is using rescue=ibadroots, and the extent tree root is
corrupted thus the extent tree is NULL.
When scrub tries to search the extent tree to gather the needed extent
info, btrfs_search_slot() doesn't check if the target root is NULL or
not, resulting the null-ptr-deref.
Add sanity check for btrfs root before using it in btrfs_search_slot().
Reported-by: syzbot+3030e17bd57a73d39bd7@syzkaller.appspotmail.com
Fixes: 42437a6386 ("btrfs: introduce mount option rescue=ignorebadroots")
Link: https://syzkaller.appspot.com/bug?extid=3030e17bd57a73d39bd7
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Tested-by: syzbot+3030e17bd57a73d39bd7@syzkaller.appspotmail.com
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4c853af0c ]
Add annotations to functions that might sleep due to allocations or IO
and could be called from various contexts. In case of btrfs_search_slot
it's not obvious why it would sleep:
btrfs_search_slot
setup_nodes_for_search
reada_for_balance
btrfs_readahead_node_child
btrfs_readahead_tree_block
btrfs_find_create_tree_block
alloc_extent_buffer
kmem_cache_zalloc
/* allocate memory non-atomically, might sleep */
kmem_cache_alloc(GFP_NOFS|__GFP_NOFAIL|__GFP_ZERO)
read_extent_buffer_pages
submit_extent_page
/* disk IO, might sleep */
submit_one_bio
Other examples where the sleeping could happen is in 3 places might
sleep in update_qgroup_limit_item(), as shown below:
update_qgroup_limit_item
btrfs_alloc_path
/* allocate memory non-atomically, might sleep */
kmem_cache_zalloc(btrfs_path_cachep, GFP_NOFS)
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 3ed51857a5 ("btrfs: add a sanity check for btrfs root in btrfs_search_slot()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed67f2a913 ]
When checking for delayed refs when verifying if there are cross
references for a data extent, we stop if the path has nowait set and we
can't try lock the delayed ref head's mutex, returning -EAGAIN with the
goal of making a write fallback to a blocking context. However we ignore
the -EAGAIN at btrfs_cross_ref_exist() when check_delayed_ref() returns
it, and keep looping instead of immediately returning the -EAGAIN to the
caller.
Fix this by not looping if we get -EAGAIN and we have a nowait path.
Fixes: 26ce911446 ("btrfs: make can_nocow_extent nowait compatible")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac6f420291 ]
One of the paths quota writeback is called from is:
freeze_super()
sync_filesystem()
ext4_sync_fs()
dquot_writeback_dquots()
Since we currently don't always flush the quota_release_work queue in
this path, we can end up with the following race:
1. dquot are added to releasing_dquots list during regular operations.
2. FS Freeze starts, however, this does not flush the quota_release_work queue.
3. Freeze completes.
4. Kernel eventually tries to flush the workqueue while FS is frozen which
hits a WARN_ON since transaction gets started during frozen state:
ext4_journal_check_start+0x28/0x110 [ext4] (unreliable)
__ext4_journal_start_sb+0x64/0x1c0 [ext4]
ext4_release_dquot+0x90/0x1d0 [ext4]
quota_release_workfn+0x43c/0x4d0
Which is the following line:
WARN_ON(sb->s_writers.frozen == SB_FREEZE_COMPLETE);
Which ultimately results in generic/390 failing due to dmesg
noise. This was detected on powerpc machine 15 cores.
To avoid this, make sure to flush the workqueue during
dquot_writeback_dquots() so we dont have any pending workitems after
freeze.
Reported-by: Disha Goel <disgoel@linux.ibm.com>
CC: stable@vger.kernel.org
Fixes: dabc8b2075 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241121123855.645335-2-ojaswin@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 652f03db89 ]
Compat features are new features that older kernels can safely ignore,
allowing read-write mounts without issues. The current sb write validation
implementation returns -EFSCORRUPTED for unknown compat features,
preventing filesystem write operations and contradicting the feature's
definition.
Additionally, if the mounted image is unclean, the log recovery may need
to write to the superblock. Returning an error for unknown compat features
during sb write validation can cause mount failures.
Although XFS currently does not use compat feature flags, this issue
affects current kernels' ability to mount images that may use compat
feature flags in the future.
Since superblock read validation already warns about unknown compat
features, it's unnecessary to repeat this warning during write validation.
Therefore, the relevant code in write validation is being removed.
Fixes: 9e037cb797 ("xfs: check for unknown v5 feature bits in superblock write verifier")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52cb7f8f17 ]
When exporting only one file system with fsid=0 on the server side, the
client alternately uses the ro/rw mount options to perform the mount
operation, and a new vfsmount is generated each time.
It can be reproduced as follows:
[root@localhost ~]# mount /dev/sda /mnt2
[root@localhost ~]# echo "/mnt2 *(rw,no_root_squash,fsid=0)" >/etc/exports
[root@localhost ~]# systemctl restart nfs-server
[root@localhost ~]# mount -t nfs -o ro,vers=4 127.0.0.1:/ /mnt/sdaa
[root@localhost ~]# mount -t nfs -o rw,vers=4 127.0.0.1:/ /mnt/sdaa
[root@localhost ~]# mount -t nfs -o ro,vers=4 127.0.0.1:/ /mnt/sdaa
[root@localhost ~]# mount -t nfs -o rw,vers=4 127.0.0.1:/ /mnt/sdaa
[root@localhost ~]# mount | grep nfs4
127.0.0.1:/ on /mnt/sdaa type nfs4 (ro,relatime,vers=4.2,rsize=1048576,...
127.0.0.1:/ on /mnt/sdaa type nfs4 (rw,relatime,vers=4.2,rsize=1048576,...
127.0.0.1:/ on /mnt/sdaa type nfs4 (ro,relatime,vers=4.2,rsize=1048576,...
127.0.0.1:/ on /mnt/sdaa type nfs4 (rw,relatime,vers=4.2,rsize=1048576,...
[root@localhost ~]#
We expected that after mounting with the ro option, using the rw option to
mount again would return EBUSY, but the actual situation was not the case.
As shown above, when mounting for the first time, a superblock with the ro
flag will be generated, and at the same time, in do_new_mount_fc -->
do_add_mount, it detects that the superblock corresponding to the current
target directory is inconsistent with the currently generated one
(path->mnt->mnt_sb != newmnt->mnt.mnt_sb), and a new vfsmount will be
generated.
When mounting with the rw option for the second time, since no matching
superblock can be found in the fs_supers list, a new superblock with the
rw flag will be generated again. The superblock in use (ro) is different
from the newly generated superblock (rw), and a new vfsmount will be
generated again.
When mounting with the ro option for the third time, the superblock (ro)
is found in fs_supers, the superblock in use (rw) is different from the
found superblock (ro), and a new vfsmount will be generated again.
We can switch between ro/rw through remount, and only one superblock needs
to be generated, thus avoiding the problem of repeated generation of
vfsmount caused by switching superblocks.
Furthermore, This can also resolve the issue described in the link.
Fixes: 275a5d24bf ("NFS: Error when mounting the same filesystem with different options")
Link: https://lore.kernel.org/all/20240604112636.236517-3-lilingfeng@huaweicloud.com/
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ba44ee966 ]
When building the kernel with -Wmaybe-uninitialized, the compiler
reports this warning:
In function 'jffs2_mark_erased_block',
inlined from 'jffs2_erase_pending_blocks' at fs/jffs2/erase.c:116:4:
fs/jffs2/erase.c:474:9: warning: 'bad_offset' may be used uninitialized [-Wmaybe-uninitialized]
474 | jffs2_erase_failed(c, jeb, bad_offset);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/jffs2/erase.c: In function 'jffs2_erase_pending_blocks':
fs/jffs2/erase.c:402:18: note: 'bad_offset' was declared here
402 | uint32_t bad_offset;
| ^~~~~~~~~~
When mtd->point() is used, jffs2_erase_pending_blocks can return -EIO
without initializing bad_offset, which is later used at the filebad
label in jffs2_mark_erased_block.
Fix it by initializing this variable.
Fixes: 8a0f572397 ("[JFFS2] Return values of jffs2_block_check_erase error paths")
Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4617fb8fc1 ]
After an insertion in TNC, the tree might split and cause a node to
change its `znode->parent`. A further deletion of other nodes in the
tree (which also could free the nodes), the aforementioned node's
`znode->cparent` could still point to a freed node. This
`znode->cparent` may not be updated when getting nodes to commit in
`ubifs_tnc_start_commit()`. This could then trigger a use-after-free
when accessing the `znode->cparent` in `write_index()` in
`ubifs_tnc_end_commit()`.
This can be triggered by running
rm -f /etc/test-file.bin
dd if=/dev/urandom of=/etc/test-file.bin bs=1M count=60 conv=fsync
in a loop, and with `CONFIG_UBIFS_FS_AUTHENTICATION`. KASAN then
reports:
BUG: KASAN: use-after-free in ubifs_tnc_end_commit+0xa5c/0x1950
Write of size 32 at addr ffffff800a3af86c by task ubifs_bgt0_20/153
Call trace:
dump_backtrace+0x0/0x340
show_stack+0x18/0x24
dump_stack_lvl+0x9c/0xbc
print_address_description.constprop.0+0x74/0x2b0
kasan_report+0x1d8/0x1f0
kasan_check_range+0xf8/0x1a0
memcpy+0x84/0xf4
ubifs_tnc_end_commit+0xa5c/0x1950
do_commit+0x4e0/0x1340
ubifs_bg_thread+0x234/0x2e0
kthread+0x36c/0x410
ret_from_fork+0x10/0x20
Allocated by task 401:
kasan_save_stack+0x38/0x70
__kasan_kmalloc+0x8c/0xd0
__kmalloc+0x34c/0x5bc
tnc_insert+0x140/0x16a4
ubifs_tnc_add+0x370/0x52c
ubifs_jnl_write_data+0x5d8/0x870
do_writepage+0x36c/0x510
ubifs_writepage+0x190/0x4dc
__writepage+0x58/0x154
write_cache_pages+0x394/0x830
do_writepages+0x1f0/0x5b0
filemap_fdatawrite_wbc+0x170/0x25c
file_write_and_wait_range+0x140/0x190
ubifs_fsync+0xe8/0x290
vfs_fsync_range+0xc0/0x1e4
do_fsync+0x40/0x90
__arm64_sys_fsync+0x34/0x50
invoke_syscall.constprop.0+0xa8/0x260
do_el0_svc+0xc8/0x1f0
el0_svc+0x34/0x70
el0t_64_sync_handler+0x108/0x114
el0t_64_sync+0x1a4/0x1a8
Freed by task 403:
kasan_save_stack+0x38/0x70
kasan_set_track+0x28/0x40
kasan_set_free_info+0x28/0x4c
__kasan_slab_free+0xd4/0x13c
kfree+0xc4/0x3a0
tnc_delete+0x3f4/0xe40
ubifs_tnc_remove_range+0x368/0x73c
ubifs_tnc_remove_ino+0x29c/0x2e0
ubifs_jnl_delete_inode+0x150/0x260
ubifs_evict_inode+0x1d4/0x2e4
evict+0x1c8/0x450
iput+0x2a0/0x3c4
do_unlinkat+0x2cc/0x490
__arm64_sys_unlinkat+0x90/0x100
invoke_syscall.constprop.0+0xa8/0x260
do_el0_svc+0xc8/0x1f0
el0_svc+0x34/0x70
el0t_64_sync_handler+0x108/0x114
el0t_64_sync+0x1a4/0x1a8
The offending `memcpy()` in `ubifs_copy_hash()` has a use-after-free
when a node becomes root in TNC but still has a `cparent` to an already
freed node. More specifically, consider the following TNC:
zroot
/
/
zp1
/
/
zn
Inserting a new node `zn_new` with a key smaller then `zn` will trigger
a split in `tnc_insert()` if `zp1` is full:
zroot
/ \
/ \
zp1 zp2
/ \
/ \
zn_new zn
`zn->parent` has now been moved to `zp2`, *but* `zn->cparent` still
points to `zp1`.
Now, consider a removal of all the nodes _except_ `zn`. Just when
`tnc_delete()` is about to delete `zroot` and `zp2`:
zroot
\
\
zp2
\
\
zn
`zroot` and `zp2` get freed and the tree collapses:
zn
`zn` now becomes the new `zroot`.
`get_znodes_to_commit()` will now only find `zn`, the new `zroot`, and
`write_index()` will check its `znode->cparent` that wrongly points to
the already freed `zp1`. `ubifs_copy_hash()` thus gets wrongly called
with `znode->cparent->zbranch[znode->iip].hash` that triggers the
use-after-free!
Fix this by explicitly setting `znode->cparent` to `NULL` in
`get_znodes_to_commit()` for the root node. The search for the dirty
nodes is bottom-up in the tree. Thus, when `find_next_dirty(znode)`
returns NULL, the current `znode` _is_ the root node. Add an assert for
this.
Fixes: 16a26b20d2 ("ubifs: authentication: Add hashes to index nodes")
Tested-by: Waqar Hameed <waqar.hameed@axis.com>
Co-developed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84a2bee9c4 ]
Since commit e874dcde1c ("ubifs: Reserve one leb for each journal
head while doing budget"), available space is calulated by deducting
reservation for all journal heads. However, the total block count (
which is only used by statfs) is not updated yet, which will cause
the wrong displaying for used space(total - available).
Fix it by deducting reservation for all journal heads from total
block count.
Fixes: e874dcde1c ("ubifs: Reserve one leb for each journal head while doing budget")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fdb05dc09 ]
Yang Erkun reports that when two threads are opening files at the same
time, and are forced to abort before a reply is seen, then the call to
nfs_release_seqid() in nfs4_opendata_free() can result in a
use-after-free of the pointer to the defunct rpc task of the other
thread.
The fix is to ensure that if the RPC call is aborted before the call to
nfs_wait_on_sequence() is complete, then we must call nfs_release_seqid()
in nfs4_open_release() before the rpc_task is freed.
Reported-by: Yang Erkun <yangerkun@huawei.com>
Fixes: 24ac23ab88 ("NFSv4: Convert open() into an asynchronous RPC call")
Reviewed-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7f33b92e5b upstream.
If the tag length is >= U32_MAX - 3 then the "length + 4" addition
can result in an integer overflow. Address this by splitting the
decoding into several steps so that decode_cb_compound4res() does
not have to perform arithmetic on the unsafe length value.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ed9d83a51 upstream.
This client was only requesting READ caching, not READ and HANDLE caching
in the LeaseState on the open requests we send for directories. To
delay closing a handle (e.g. for caching directory contents) we should
be requesting HANDLE as well as READ (as we already do for deferred
close of files). See MS-SMB2 3.3.1.4 e.g.
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02dffe9ab0 upstream.
There is no check if stream size and start_clu are invalid.
If start_clu is EOF cluster and stream size is 4096, It will
cause uninit value access. because ei->hint_femp.eidx could
be 128(if cluster size is 4K) and wrong hint will allocate
next cluster. and this cluster will be same with the cluster
that is allocated by exfat_extend_valid_size(). The previous
patch will check invalid start_clu, but for clarity, initialize
hint_femp.eidx to zero.
Cc: stable@vger.kernel.org
Reported-by: syzbot+01218003be74b5e1213a@syzkaller.appspotmail.com
Tested-by: syzbot+01218003be74b5e1213a@syzkaller.appspotmail.com
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa52c54da4 upstream.
We got a report that adding a fanotify filsystem watch prevents tail -f
from receiving events.
Reproducer:
1. Create 3 windows / login sessions. Become root in each session.
2. Choose a mounted filesystem that is pretty quiet; I picked /boot.
3. In the first window, run: fsnotifywait -S -m /boot
4. In the second window, run: echo data >> /boot/foo
5. In the third window, run: tail -f /boot/foo
6. Go back to the second window and run: echo more data >> /boot/foo
7. Observe that the tail command doesn't show the new data.
8. In the first window, hit control-C to interrupt fsnotifywait.
9. In the second window, run: echo still more data >> /boot/foo
10. Observe that the tail command in the third window has now printed
the missing data.
When stracing tail, we observed that when fanotify filesystem mark is
set, tail does get the inotify event, but the event is receieved with
the filename:
read(4, "\1\0\0\0\2\0\0\0\0\0\0\0\20\0\0\0foo\0\0\0\0\0\0\0\0\0\0\0\0\0",
50) = 32
This is unexpected, because tail is watching the file itself and not its
parent and is inconsistent with the inotify event received by tail when
fanotify filesystem mark is not set:
read(4, "\1\0\0\0\2\0\0\0\0\0\0\0\0\0\0\0", 50) = 16
The inteference between different fsnotify groups was caused by the fact
that the mark on the sb requires the filename, so the filename is passed
to fsnotify(). Later on, fsnotify_handle_event() tries to take care of
not passing the filename to groups (such as inotify) that are interested
in the filename only when the parent is watching.
But the logic was incorrect for the case that no group is watching the
parent, some groups are watching the sb and some watching the inode.
Reported-by: Miklos Szeredi <miklos@szeredi.hu>
Fixes: 7372e79c9e ("fanotify: fix logic of reporting name info with watched parent")
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9f9d96136 upstream.
Commit 7c55b78818 ("jfs: xattr: fix buffer overflow for invalid xattr")
also addresses this issue but it only fixes it for positive values, while
ea_size is an integer type and can take negative values, e.g. in case of
a corrupted filesystem. This still breaks validation and would overflow
because of implicit conversion from int to size_t in print_hex_dump().
Fix this issue by clamping the ea_size value instead.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Cc: stable@vger.kernel.org
Signed-off-by: Artem Sadovnikov <ancowi69@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a622e4d47 upstream.
The original implementation ext4's FS_IOC_GETFSMAP handling only
worked when the range of queried blocks included at least one free
(unallocated) block range. This is because how the metadata blocks
were emitted was as a side effect of ext4_mballoc_query_range()
calling ext4_getfsmap_datadev_helper(), and that function was only
called when a free block range was identified. As a result, this
caused generic/365 to fail.
Fix this by creating a new function ext4_getfsmap_meta_helper() which
gets called so that blocks before the first free block range in a
block group can get properly reported.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 902cc179c9 upstream.
find_group_other() and find_group_orlov() read *_lo, *_hi with
ext4_free_inodes_count without additional locking. This can cause
data-race warning, but since the lock is held for most writes and free
inodes value is generally not a problem even if it is incorrect, it is
more appropriate to use READ_ONCE()/WRITE_ONCE() than to add locking.
==================================================================
BUG: KCSAN: data-race in ext4_free_inodes_count / ext4_free_inodes_set
write to 0xffff88810404300e of 2 bytes by task 6254 on cpu 1:
ext4_free_inodes_set+0x1f/0x80 fs/ext4/super.c:405
__ext4_new_inode+0x15ca/0x2200 fs/ext4/ialloc.c:1216
ext4_symlink+0x242/0x5a0 fs/ext4/namei.c:3391
vfs_symlink+0xca/0x1d0 fs/namei.c:4615
do_symlinkat+0xe3/0x340 fs/namei.c:4641
__do_sys_symlinkat fs/namei.c:4657 [inline]
__se_sys_symlinkat fs/namei.c:4654 [inline]
__x64_sys_symlinkat+0x5e/0x70 fs/namei.c:4654
x64_sys_call+0x1dda/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:267
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
read to 0xffff88810404300e of 2 bytes by task 6257 on cpu 0:
ext4_free_inodes_count+0x1c/0x80 fs/ext4/super.c:349
find_group_other fs/ext4/ialloc.c:594 [inline]
__ext4_new_inode+0x6ec/0x2200 fs/ext4/ialloc.c:1017
ext4_symlink+0x242/0x5a0 fs/ext4/namei.c:3391
vfs_symlink+0xca/0x1d0 fs/namei.c:4615
do_symlinkat+0xe3/0x340 fs/namei.c:4641
__do_sys_symlinkat fs/namei.c:4657 [inline]
__se_sys_symlinkat fs/namei.c:4654 [inline]
__x64_sys_symlinkat+0x5e/0x70 fs/namei.c:4654
x64_sys_call+0x1dda/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:267
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Cc: stable@vger.kernel.org
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://patch.msgid.link/20241003125337.47283-1-aha310510@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74e9795812 upstream.
Create subvolume, create snapshot and delete subvolume all use
btrfs_subvolume_reserve_metadata() to reserve metadata for the changes
done to the parent subvolume's fs tree, which cannot be mediated in the
normal way via start_transaction. When quota groups (squota or qgroups)
are enabled, this reserves qgroup metadata of type PREALLOC. Once the
operation is associated to a transaction, we convert PREALLOC to
PERTRANS, which gets cleared in bulk at the end of the transaction.
However, the error paths of these three operations were not implementing
this lifecycle correctly. They unconditionally converted the PREALLOC to
PERTRANS in a generic cleanup step regardless of errors or whether the
operation was fully associated to a transaction or not. This resulted in
error paths occasionally converting this rsv to PERTRANS without calling
record_root_in_trans successfully, which meant that unless that root got
recorded in the transaction by some other thread, the end of the
transaction would not free that root's PERTRANS, leaking it. Ultimately,
this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount
for the leaked reservation.
The fix is to ensure that every qgroup PREALLOC reservation observes the
following properties:
1. any failure before record_root_in_trans is called successfully
results in freeing the PREALLOC reservation.
2. after record_root_in_trans, we convert to PERTRANS, and now the
transaction owns freeing the reservation.
This patch enforces those properties on the three operations. Without
it, generic/269 with squotas enabled at mkfs time would fail in ~5-10
runs on my system. With this patch, it ran successfully 1000 times in a
row.
Fixes: e85fde5162 ("btrfs: qgroup: fix qgroup meta rsv leak for subvolume operations")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
[Xiangyu: BP to fix CVE-2024-35956, due to 6.1 btrfs_subvolume_release_metadata()
defined in ctree.h, modified the header file name from root-tree.h to ctree.h]
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb63435b7c upstream.
There is a lack of verification of the space occupied by fixed members
of xlog_op_header in the xlog_recover_process_data.
We can create a crafted image to trigger an out of bounds read by
following these steps:
1) Mount an image of xfs, and do some file operations to leave records
2) Before umounting, copy the image for subsequent steps to simulate
abnormal exit. Because umount will ensure that tail_blk and
head_blk are the same, which will result in the inability to enter
xlog_recover_process_data
3) Write a tool to parse and modify the copied image in step 2
4) Make the end of the xlog_op_header entries only 1 byte away from
xlog_rec_header->h_size
5) xlog_rec_header->h_num_logops++
6) Modify xlog_rec_header->h_crc
Fix:
Add a check to make sure there is sufficient space to access fixed members
of xlog_op_header.
Signed-off-by: lei lu <llfamsec@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 556bdf27c2 upstream.
Added bounds checking to make sure that every attr don't stray beyond
valid memory region.
Signed-off-by: lei lu <llfamsec@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
