commit d182bcf300 upstream.
The usage of edge-triggered interrupts lead to lost interrupts under load,
see [0]. This was confirmed to be fixed by using level-triggered
interrupts.
The report was about SDIO. However, as the host controller is the same
for SD and MMC, apply the change to all mmc controller instances.
[0] https://www.spinics.net/lists/linux-mmc/msg73991.html
Fixes: 221cf34bac ("ARM64: dts: meson-axg: enable the eMMC controller")
Reported-by: Peter Suti <peter.suti@streamunlimited.com>
Tested-by: Vyacheslav Bocharov <adeep@lexina.in>
Tested-by: Peter Suti <peter.suti@streamunlimited.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/c00655d3-02f8-6f5f-4239-ca2412420cad@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac8db4ccee upstream.
The usage of edge-triggered interrupts lead to lost interrupts under load,
see [0]. This was confirmed to be fixed by using level-triggered
interrupts.
The report was about SDIO. However, as the host controller is the same
for SD and MMC, apply the change to all mmc controller instances.
[0] https://www.spinics.net/lists/linux-mmc/msg73991.html
Fixes: 4759fd87b9 ("arm64: dts: meson: g12a: add mmc nodes")
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/27d89baa-b8fa-baca-541b-ef17a97cde3c@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66e45351f7 upstream.
The usage of edge-triggered interrupts lead to lost interrupts under load,
see [0]. This was confirmed to be fixed by using level-triggered
interrupts.
The report was about SDIO. However, as the host controller is the same
for SD and MMC, apply the change to all mmc controller instances.
[0] https://www.spinics.net/lists/linux-mmc/msg73991.html
Fixes: ef8d2ffedf ("ARM64: dts: meson-gxbb: add MMC support")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/76e042e0-a610-5ed5-209f-c4d7f879df44@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 97801cfcf9 ]
When vdosys1 was initially added, it was incorrectly assumed to be
compatible with vdosys0, and thus both had the same mt8195-mmsys
compatible attached.
This has since been corrected in commit b237efd47d ("dt-bindings:
arm: mediatek: mmsys: change compatible for MT8195") and commit
82219cfbef ("dt-bindings: arm: mediatek: mmsys: add vdosys1 compatible
for MT8195"). The device tree needs to be fixed as well, otherwise
the vdosys1 block fails to work, and causes its dependent power domain
controller to not work either.
Change the compatible string of vdosys1 to "mediatek,mt8195-vdosys1".
While at it, also add the new "mediatek,mt8195-vdosys0" compatible to
vdosys0.
Fixes: 6aa5b46d17 ("arm64: dts: mt8195: Add vdosys and vppsys clock nodes")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230202104014.2931517-1-wenst@chromium.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc121b707e ]
As other rk336x based devices, the Rock 3 Model A has issues with high
speed SD cards, so lower the speed to 50 instead of 104 in the same
manor has the Quartz64 Model B has.
Fixes: 22a442e658 ("arm64: dts: rockchip: add basic dts for the radxa rock3 model a")
Signed-off-by: Dan Johansen <strit@manjaro.org>
Link: https://lore.kernel.org/r/20230128112432.132302-1-strit@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f515b663d ]
When the input enable pinconf was introduced, a default drive-strength
value of 2 was set for the pull up/down configs. However, this parameter
is unneeded when configuring the pin as input, and having a single
hardcoded value here is actually harmful: GPIOs on the RK3399 have
various same drive-strength capabilities depending on the bank and port
they belong to.
As an example, trying to configure the GPIO4_PD3 pin as an input with
pull-up enabled fails with the following output:
[ 10.706542] rockchip-pinctrl pinctrl: unsupported driver strength 2
[ 10.713661] rockchip-pinctrl pinctrl: pin_config_set op failed for pin 155
(acceptable drive-strength values for this pin being 3, 6, 9 and 12)
Let's drop the drive-strength property from all input pinconfs in order
to solve this issue.
Fixes: ec48c3e82c ("arm64: dts: rockchip: add an input enable pinconf to rk3399")
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Reviewed-by: Caleb Connolly <kc@postmarketos.org>
Link: https://lore.kernel.org/r/20221215101947.254896-1-arnaud.ferraris@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39c95d0c35 ]
Currently if suspending using either freeze or memory state, the fec
driver tries to power down the phy which leads to crash of the kernel
and non-responsible kernel with the following call trace:
[ 24.839889 ] Call trace:
[ 24.839892 ] phy_error+0x18/0x60
[ 24.839898 ] kszphy_handle_interrupt+0x6c/0x80
[ 24.839903 ] phy_interrupt+0x20/0x2c
[ 24.839909 ] irq_thread_fn+0x30/0xa0
[ 24.839919 ] irq_thread+0x178/0x2c0
[ 24.839925 ] kthread+0x154/0x160
[ 24.839932 ] ret_from_fork+0x10/0x20
Since there is currently no functionality in the phy subsystem to power
down phys let's just disable the feature of powering-down the ethernet
phy.
Fixes: 6a57f224f7 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fca053893e ]
The following build warnings are seen when running:
make dtbs_check DT_SCHEMA_FILES=fsl-imx-uart.yaml
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dtb: serial@30860000: cts-gpios: False schema does not allow [[33, 3, 1]]
From schema: Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dtb: serial@30860000: rts-gpios: False schema does not allow [[33, 5, 1]]
From schema: Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
...
The imx8m Venice Gateworks boards do not expose the UART RTS and CTS
as native UART pins, so 'uart-has-rtscts' should not be used.
Using 'uart-has-rtscts' with 'rts-gpios' is an invalid combination
detected by serial.yaml.
Fix the problem by removing the incorrect 'uart-has-rtscts' property.
Fixes: 27c8f4ccc1 ("arm64: dts: imx8mm-venice-gw72xx-0x: add dt overlays for serial modes")
Fixes: d9a9a7cf32 ("arm64: dts: imx8m{m,n}-venice-*: add missing uart-has-rtscts property to UARTs")
Fixes: 870f645b39 ("arm64: dts: imx8mp-venice-gw74xx: add WiFi/BT module support")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 380cd3a34b ]
Add reserved regions for memory hole and tz app mem to prevent
rebooting. Also enable cont_splash_mem, it is the same as the
generic 8994 one.
Reported-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Dominik Kobinski <dominikkobinski314@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221230194845.57780-1-dominikkobinski314@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef10d57936 ]
There is no "no-emmc" property, so intention for SD/SDIO only nodes was
to use "no-mmc".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b025b4f5c2 ]
"make dtbs_check":
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: $nodename:0: 'pca9547@77' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@4' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bd5ab9333 ]
MSM8992 uses the same mutex hardware as MSM8994. This was wrong
from the start, but never presented as an issue until the sfpb
compatible was given different driver data.
Fixes: 6a6d1978f9 ("arm64: dts: msm8992 SoC and LG Bullhead (Nexus 5X) support")
Reported-by: Eugene Lepshy <fekz115@gmail.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221219131918.446587-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10e2f328bd ]
dt_binding_check detects an issue with the pgc_hsiomix power
domain:
pgc: 'power-domains@17' does not match any of the regexes
This is because 'power-domains' should be 'power-domain'
Fixes: 2ae42e0c0b ("arm64: dts: imx8mp: add HSIO power-domains")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3b75ace20 ]
The GPC node references an interrupt parent, but it doesn't
state the interrupt itself. According to the TRM, this IRQ
is 87. This also eliminate an error detected from dt_binding_check
Fixes: fc0f051246 ("arm64: dts: imx8mp: add GPC node with GPU power domains")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62f0147fd4 ]
For clock and strobe pad of usdhc, need to config as pull down.
Current pad config set these pad as both pull up and pull down,
this is wrong, so fix it here.
Find this issue when enable HS400ES mode on one Micron eMMC chip,
CMD8 always meet CRC error in HS400ES/HS400 mode.
Fixes: e37907bd82 ("arm64: dts: freescale: add i.MX93 11x11 EVK basic support")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c620a3051 ]
Set optional `simple-audio-card,mclk-fs` parameter to ensure a proper
clock to the nau8822 audio codec. Without this change with an audio
stream rate of 44.1 kHz the playback is faster.
Set the MCLK at the right frequency, codec can properly use it to
generate 44.1 kHz I2S-FS.
Fixes: 6a57f224f7 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5225ba9db1 ]
Early hardware did not support hardware handshaking on the UART, but
final production hardware did. When the hardware was updated the chip
select was changed to facilitate hardware handshaking on UART3. Fix the
ecspi2 pin mux to eliminate a pin conflict with UART3 and allow the
EEPROM to operate again.
Fixes: 4ce01ce36d ("arm64: dts: imx8mm-beacon: Enable RTS-CTS on UART3")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d1d030f00 ]
Set optional `simple-audio-card,mclk-fs` parameter to ensure a proper
clock to the wm8904 audio codec. Without this change with an audio
stream rate of 44.1 kHz the playback is completely distorted.
Fixes: 6a57f224f7 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfd04dd1c4 ]
'regulator-compatible' is not a valid property according to
nxp,pca9450-regulator.yaml and causes the following warning:
DTC_CHK arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dtb
...
pmic@25: regulators:LDO1: Unevaluated properties are not allowed ('regulator-compatible' was unexpected)
Remove the invalid 'regulator-compatible' property.
Cc: Teresa Remmet <t.remmet@phytec.de>
Fixes: 88f7f6bcca ("arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee4e530bdd ]
The vendor kernel is using the GCC_USB4_DP_PHY_PRIM_BCR and
GCC_USB4_1_DP_PHY_PRIM_BCR resets for the USB4-USB3-DP QMP PHYs.
Update the primary USB-DP PHY node to match.
Fixes: 152d1faf1e ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221121085058.31213-15-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8a1ed98fe0 upstream.
After commit cf7f3f4fa9 ("clk: imx8mp: fix usb_root_clk parent"),
usb_root_clk is no longer for suspend clock so update dts accordingly
to use right bus clock and suspend clock.
Fixes: fb8587a2c1 ("arm64: dtsi: imx8mp: add usb nodes")
Cc: stable@vger.kernel.org # ed1f4ccfe9: clk: imx: imx8mp: add shared clk gate for usb suspend clk
Cc: stable@vger.kernel.org # v5.19+
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4a4175201 upstream.
The size of device tree node secmon (bl31_secmon_reserved) was
incorrect. It should be increased to 2MiB (0x200000).
The origin setting will cause some abnormal behavior due to
trusted-firmware-a and related firmware didn't load correctly.
The incorrect behavior may vary because of different software stacks.
For example, it will cause build error in some Yocto project because
it will check if there was enough memory to load trusted-firmware-a
to the reserved memory.
When mt8195-demo.dts sent to the upstream, at that time the size of
BL31 was small. Because supported functions and modules in BL31 are
basic sets when the board was under early development stage.
Now BL31 includes more firmwares of coprocessors and maturer functions
so the size has grown bigger in real applications. According to the value
reported by customers, we think reserved 2MiB for BL31 might be enough
for maybe the following 2 or 3 years.
Cc: stable@vger.kernel.org # v5.19
Fixes: 6147314aee ("arm64: dts: mediatek: Add device-tree for MT8195 Demo board")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221111095540.28881-1-macpaul.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd49776d8f upstream.
The pin configuration (done with generic pin controller helpers and
as expressed by bindings) requires children nodes with either:
1. "pins" property and the actual configuration,
2. another set of nodes with above point.
The qup_i2c12_default pin configuration used second method - with a
"pinmux" child.
Fixes: 44acee2078 ("arm64: dts: qcom: Add Lenovo Yoga C630")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192039.240486-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3638ea010c upstream.
The pin configuration (done with generic pin controller helpers and
as expressed by bindings) requires children nodes with either:
1. "pins" property and the actual configuration,
2. another set of nodes with above point.
The qup_i2c12_default pin configuration used second method - with a
"pinmux" child.
Fixes: d4b341269e ("arm64: dts: qcom: Add support for Samsung Galaxy Book2")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192039.240486-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f446022b93 upstream.
There are three UFS reference clocks on SC8280XP which are used as
follows:
- The GCC_UFS_REF_CLKREF_CLK clock is fed to any UFS device connected
to either controller.
- The GCC_UFS_1_CARD_CLKREF_CLK and GCC_UFS_CARD_CLKREF_CLK clocks
provide reference clocks to the two PHYs.
Note that this depends on first updating the clock driver to reflect
that all three clocks are sourced from CXO. Specifically, the UFS
controller driver expects the device reference clock to have a valid
frequency:
ufshcd-qcom 1d84000.ufs: invalid ref_clk setting = 0
Fixes: 152d1faf1e ("arm64: dts: qcom: add SC8280XP platform")
Fixes: 8d6b458ce6 ("arm64: dts: qcom: sc8280xp: fix ufs_card_phy ref clock")
Fixes: f3aa975e23 ("arm64: dts: qcom: sc8280xp: correct ref clock for ufs_mem_phy")
Link: https://lore.kernel.org/lkml/Y2OEjNAPXg5BfOxH@hovoldconsulting.com/
Cc: stable@vger.kernel.org # 5.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104092045.17410-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9905370560 upstream.
The pin configuration (done with generic pin controller helpers and
as expressed by bindings) requires children nodes with either:
1. "pins" property and the actual configuration,
2. another set of nodes with above point.
The qup_spi2_default pin configuration uses alreaady the second method
with a "pinmux" child, so configure drive-strength similarly in
"pinconf". Otherwise the PIN drive strength would not be applied.
Fixes: 8d23a00404 ("arm64: dts: qcom: db845c: add Low speed expansion i2c and spi nodes")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221010114417.29859-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0953777640 upstream.
The SC8280XP UFS controllers are cache coherent and must be marked as
such in the devicetree to avoid potential data corruption.
Fixes: 152d1faf1e ("arm64: dts: qcom: add SC8280XP platform")
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221205100837.29212-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8d8840c72 upstream.
When adding support for the DisplayPort part of the QMP PHY the binding
(and devicetree parser) for the (USB) child node was simply reused and
this has lead to some confusion.
The third DP register region is really the DP_PHY region, not "PCS" as
the binding claims, and lie at offset 0x2a00 (not 0x2c00).
Similarly, there likely are no "RX", "RX2" or "PCS_MISC" regions as
there are for the USB part of the PHY (and in any case the Linux driver
does not use them).
Note that the sixth "PCS_MISC" region is not even in the binding.
Fixes: 5aa0d1becd ("arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode")
Cc: stable@vger.kernel.org # 5.13
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111094729.11842-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 347b9491c5 upstream.
When adding support for the DisplayPort part of the QMP PHY the binding
(and devicetree parser) for the (USB) child node was simply reused and
this has lead to some confusion.
The third DP register region is really the DP_PHY region, not "PCS" as
the binding claims, and lie at offset 0x2a00 (not 0x2c00).
Similarly, there likely are no "RX", "RX2" or "PCS_MISC" regions as
there are for the USB part of the PHY (and in any case the Linux driver
does not use them).
Note that the sixth "PCS_MISC" region is not even in the binding.
Fixes: 23737b9557 ("arm64: dts: qcom: sm6350: Add USB1 nodes")
Cc: stable@vger.kernel.org # 5.16
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111094729.11842-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7372b944a6 ]
When enabling the APPS SMMU the mainline driver reconfigures the SMMU
from its bootloader configuration, losing the stream mapping for (among
which) the SDHCI hardware and breaking its ADMA feature. This feature
can be disabled with:
sdhci.debug_quirks=0x40
But it is of course desired to have this feature enabled and working
through the SMMU.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # sm7225-fairphone-fp4
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221030073232.22726-11-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d561dc4e5 ]
SDHCI on SM8450 HDK also has problems with SDR104/SDR50:
mmc0: card never left busy state
mmc0: error -110 whilst initialising SD card
so I think it is safe to assume this issue affects all SM8450 boards.
Move the quirk disallowing these modes to the SoC DTSI, to spare people
working on other boards the misery of debugging this issue.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221026200357.391635-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad2631b564 ]
The actual clock feeding into the Mali GPU on the MT8183 is from the
clock gate in the MFGCFG block, not CLK_TOP_MFGPLL_CK from the TOPCKGEN
block, which itself is simply a pass-through placeholder for the MFGPLL
in the APMIXEDSYS block.
Fix the hardware description with the correct clock reference.
Fixes: a8168cebf1 ("arm64: dts: mt8183: Add node for the Mali GPU")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220927101128.44758-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56d32c51df ]
The PCIe iommu nodes use "dart" as node names. Replace it with the
the standard "iommu" node name as all other iommu nodes.
Fixes: 3c866bb795 ("arm64: dts: apple: t8103: Add PCIe DARTs")
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 248400656b ]
commit edf408b946 ("PCI: dwc: Validate iATU outbound mappings against
hardware constraints") exposes an issue with the existing partitioning of
the aperture space where the Prefetchable apertures of controllers
C5, C7 and C9 in Tegra234 cross the 32GB boundary hardware constraint.
This patch makes sure that the Prefetchable region doesn't spill over
the 32GB boundary.
Fixes: ec142c44b0 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f535cc583 ]
Update its unit name to oscillator-26m and remove the unneeded unit
address to fix a unit_address_vs_reg warning.
Fixes: 464c510f60 ("arm64: dts: mediatek: add mt6797 support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-9-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d4516f53a ]
The unit address for the pinctrl node is (0x)1000b000 and not
(0x)10005000, which is the syscfg_pctl_a address instead.
This fixes the following warning:
arch/arm64/boot/dts/mediatek/mt2712e.dtsi:264.40-267.4: Warning
(unique_unit_address): /syscfg_pctl_a@10005000: duplicate
unit-address (also used in node /pinctrl@10005000)
Fixes: f0c64340b7 ("arm64: dts: mt2712: add pintcrl device node.")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d759c524c ]
Rename fixed-clock oscillators to oscillator-26m and oscillator-32k
and remove the unit address to fix the unit_address_vs_reg warning;
fix the unit address for interrupt and intpol controllers by
removing a leading zero in their unit address.
This commit fixes the following warnings:
(unit_address_vs_reg): /oscillator@0: node has a unit name, but
no reg or ranges property
(unit_address_vs_reg): /oscillator@1: node has a unit name, but
no reg or ranges property
(simple_bus_reg): /soc/interrupt-controller@0c000000: simple-bus
unit address format error, expected "c000000"
(simple_bus_reg): /soc/intpol-controller@0c53a650: simple-bus
unit address format error, expected "c53a650"
Fixes: 4c7a626077 ("arm64: dts: add dts nodes for MT6779")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
