commit 15383a0d63 upstream.
Some fixes may require user space to check if they are applied on the
running kernel before using a specific feature. For instance, this
applies when a restriction was previously too restrictive and is now
getting relaxed (e.g. for compatibility reasons). However, non-visible
changes for legitimate use (e.g. security fixes) do not require an
erratum.
Because fixes are backported down to a specific Landlock ABI, we need a
way to avoid cherry-pick conflicts. The solution is to only update a
file related to the lower ABI impacted by this issue. All the ABI files
are then used to create a bitmask of fixes.
The new errata interface is similar to the one used to get the supported
Landlock ABI version, but it returns a bitmask instead because the order
of fixes may not match the order of versions, and not all fixes may
apply to all versions.
The actual errata will come with dedicated commits. The description is
not actually used in the code but serves as documentation.
Create the landlock_abi_version symbol and use its value to check errata
consistency.
Update test_base's create_ruleset_checks_ordering tests and add errata
tests.
This commit is backportable down to the first version of Landlock.
Fixes: 3532b0b435 ("landlock: Enable user space to infer supported features")
Cc: Günther Noack <gnoack@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250318161443.279194-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a30951d09c ]
On 32-bit, we can't use %lu to print a size_t variable and gcc warns us
about it. Shame it doesn't warn about it on 64-bit.
Link: https://lkml.kernel.org/r/20250403003311.359917-1-Liam.Howlett@oracle.com
Fixes: cc86e0c2f3 ("radix tree test suite: add support for slab bulk APIs")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c183165f87 upstream.
The file descriptor 'fd_in' is opened when cfg_input is configured, but
not closed in main_loop(), this patch fixes it.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Co-developed-by: Cong Liu <liucong2@kylinos.cn>
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250328-net-mptcp-misc-fixes-6-15-v1-3-34161a482a7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 208baa3ec9 ]
If malloc returns NULL due to low memory, 'config' pointer can be NULL.
Add a check to prevent NULL dereference.
Link: https://lore.kernel.org/r/20250219122715.3892223-1-quic_zhonhan@quicinc.com
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d50e00fef ]
Testcase should fail if -EWOULDBLOCK is not returned when expected value
differs from actual value from the waiter.
Link: https://lore.kernel.org/r/20250404221225.1596324-1-edliaw@google.com
Fixes: 9d57f7c797 ("selftests: futex: Test sys_futex_waitv() wouldblock")
Signed-off-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a352a90e8 ]
Annotate so it is built with non-executable stack.
Fixes: 8b97519711 ("perf test: Add asm pureloop test tool")
Signed-off-by: Marcus Meissner <meissner@suse.de>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20250323085410.23751-1-meissner@suse.de
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89aaeaf842 ]
The pyrf_event__new() method copies the event obtained from the perf
ring buffer to a structure that will then be turned into a python object
for further consumption, so it copies perf_event.header.size bytes to
its 'event' member:
$ pahole -C pyrf_event /tmp/build/perf-tools-next/python/perf.cpython-312-x86_64-linux-gnu.so
struct pyrf_event {
PyObject ob_base; /* 0 16 */
struct evsel * evsel; /* 16 8 */
struct perf_sample sample; /* 24 312 */
/* XXX last struct has 7 bytes of padding, 2 holes */
/* --- cacheline 5 boundary (320 bytes) was 16 bytes ago --- */
union perf_event event; /* 336 4168 */
/* size: 4504, cachelines: 71, members: 4 */
/* member types with holes: 1, total: 2 */
/* paddings: 1, sum paddings: 7 */
/* last cacheline: 24 bytes */
};
$
It was doing so without checking if the event just obtained has more
than that space, fix it.
This isn't a proper, final solution, as we need to support larger
events, but for the time being we at least bounds check and document it.
Fixes: 877108e42b ("perf tools: Initial python binding")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-7-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3fed3ae34 ]
When processing tracepoints the perf python binding was parsing the
event before calling perf_mmap__consume(&md->core) in
pyrf_evlist__read_on_cpu().
But part of this event parsing was to set the perf_sample->raw_data
pointer to the payload of the event, which then could be overwritten by
other event before tracepoint fields were asked for via event.prev_comm
in a python program, for instance.
This also happened with other fields, but strings were were problems
were surfacing, as there is UTF-8 validation for the potentially garbled
data.
This ended up showing up as (with some added debugging messages):
( field 'prev_comm' ret=0x7f7c31f65110, raw_size=68 ) ( field 'prev_pid' ret=0x7f7c23b1bed0, raw_size=68 ) ( field 'prev_prio' ret=0x7f7c239c0030, raw_size=68 ) ( field 'prev_state' ret=0x7f7c239c0250, raw_size=68 ) time 14771421785867 prev_comm= prev_pid=1919907691 prev_prio=796026219 prev_state=0x303a32313175 ==>
( XXX '��' len=16, raw_size=68) ( field 'next_comm' ret=(nil), raw_size=68 ) Traceback (most recent call last):
File "/home/acme/git/perf-tools-next/tools/perf/python/tracepoint.py", line 51, in <module>
main()
File "/home/acme/git/perf-tools-next/tools/perf/python/tracepoint.py", line 46, in main
event.next_comm,
^^^^^^^^^^^^^^^
AttributeError: 'perf.sample_event' object has no attribute 'next_comm'
When event.next_comm was asked for, the PyUnicode_FromString() python
API would fail and that tracepoint field wouldn't be available, stopping
the tools/perf/python/tracepoint.py test tool.
But, since we already do a copy of the whole event in pyrf_event__new,
just use it and while at it remove what was done in in e8968e6541
("perf python: Fix pyrf_evlist__read_on_cpu event consuming") because we
don't really need to wait for parsing the sample before declaring the
event as consumed.
This copy is questionable as is now, as it limits the maximum event +
sample_type and tracepoint payload to sizeof(union perf_event), this all
has been "working" because 'struct perf_event_mmap2', the largest entry
in 'union perf_event' is:
$ pahole -C perf_event ~/bin/perf | grep mmap2
struct perf_record_mmap2 mmap2; /* 0 4168 */
$
Fixes: bae57e3825 ("perf python: Add support to resolve tracepoint fields")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-6-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3de5a2bf5b ]
To avoid a leak if we have the python object but then something happens
and we need to return the operation, decrement the offset of the newly
created object.
Fixes: 377f698db1 ("perf python: Add struct evsel into struct pyrf_event")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-5-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1376c195e8 ]
Some old cut'n'paste error, its "ip", so the description should be
"event ip", not "event type".
Fixes: 877108e42b ("perf tools: Initial python binding")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-2-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf67629f7f ]
No need to specify the array size, let the compiler figure that out.
This addresses this compiler warning that was noticed while build
testing on fedora rawhide:
31 15.81 fedora:rawhide : FAIL gcc version 15.0.1 20250225 (Red Hat 15.0.1-0) (GCC)
util/units.c: In function 'unit_number__scnprintf':
util/units.c:67:24: error: initializer-string for array of 'char' is too long [-Werror=unterminated-string-initialization]
67 | char unit[4] = "BKMG";
| ^~~~~~
cc1: all warnings being treated as errors
Fixes: 9808143ba2 ("perf tools: Add unit_number__scnprintf function")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250310194534.265487-3-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe0ce8a9d8 ]
Over various refactorings evlist__create_syswide_maps has been made to
only ever return with -ENOMEM. Fix this so that when
perf_evlist__set_maps is successfully called, 0 is returned.
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250228222308.626803-3-irogers@google.com
Fixes: 8c0498b689 ("perf evlist: Fix create_syswide_maps() not propagating maps")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4107a1aeb2 ]
On powerpc, a CPU does not necessarily originate from NUMA node 0.
This contrasts with architectures like x86, where CPU 0 is not
hot-pluggable, making NUMA node 0 a consistently valid node.
This discrepancy can lead to failures when creating a map on NUMA
node 0, which is initialized by default, if no CPUs are allocated
from NUMA node 0.
This patch fixes the issue by setting NUMA_NO_NODE (-1) for map
creation for this selftest.
Fixes: 96eabe7a40 ("bpf: Allow selecting numa node during map creation")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/cf1f61468b47425ecf3728689bc9636ddd1d910e.1738302337.git.skb99@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de07b18289 ]
The strncmp benchmark uses the bpf_strncmp helper and a hand-written
loop to compare two strings. The values of the strings are filled from
userspace. One of the strings is non-const (in .bss) while the other is
const (in .rodata) since that is the requirement of bpf_strncmp.
The problem is that in the hand-written loop, Clang optimizes the reads
from the const string to always return 0 which breaks the benchmark.
Use barrier_var to prevent the optimization.
The effect can be seen on the strncmp-no-helper variant.
Before this change:
# ./bench strncmp-no-helper
Setting up benchmark 'strncmp-no-helper'...
Benchmark 'strncmp-no-helper' started.
Iter 0 (112.309us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 1 (-23.238us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 2 ( 58.994us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 3 (-30.466us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 4 ( 29.996us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 5 ( 16.949us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 6 (-60.035us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Summary: hits 0.000 ± 0.000M/s ( 0.000M/prod), drops 0.000 ± 0.000M/s, total operations 0.000 ± 0.000M/s
After this change:
# ./bench strncmp-no-helper
Setting up benchmark 'strncmp-no-helper'...
Benchmark 'strncmp-no-helper' started.
Iter 0 ( 77.711us): hits 5.534M/s ( 5.534M/prod), drops 0.000M/s, total operations 5.534M/s
Iter 1 ( 11.215us): hits 6.006M/s ( 6.006M/prod), drops 0.000M/s, total operations 6.006M/s
Iter 2 (-14.253us): hits 5.931M/s ( 5.931M/prod), drops 0.000M/s, total operations 5.931M/s
Iter 3 ( 59.087us): hits 6.005M/s ( 6.005M/prod), drops 0.000M/s, total operations 6.005M/s
Iter 4 (-21.379us): hits 6.010M/s ( 6.010M/prod), drops 0.000M/s, total operations 6.010M/s
Iter 5 (-20.310us): hits 5.861M/s ( 5.861M/prod), drops 0.000M/s, total operations 5.861M/s
Iter 6 ( 53.937us): hits 6.004M/s ( 6.004M/prod), drops 0.000M/s, total operations 6.004M/s
Summary: hits 5.969 ± 0.061M/s ( 5.969M/prod), drops 0.000 ± 0.000M/s, total operations 5.969 ± 0.061M/s
Fixes: 9c42652f8b ("selftests/bpf: Add benchmark for bpf_strncmp() helper")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20250313122852.1365202-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0525cd72b ]
Fix theoretical NULL dereference in linker when resolving *extern*
STT_SECTION symbol against not-yet-existing ELF section. Not sure if
it's possible in practice for valid ELF object files (this would require
embedded assembly manipulations, at which point BTF will be missing),
but fix the s/dst_sym/dst_sec/ typo guarding this condition anyways.
Fixes: faf6ed321c ("libbpf: Add BPF static linker APIs")
Fixes: a46349227c ("libbpf: Add linker extern resolution support for functions and global variables")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250220002821.834400-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3ec920bb97 upstream.
After the netdevsim update to use human-readable IP address formats for
IPsec, we can now use the source and destination IPs directly in testing.
Here is the result:
# ./rtnetlink.sh -t kci_test_ipsec_offload
PASS: ipsec_offload
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241010040027.21440-4-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7d3f3b4367 ]
Check number of paths by fib_info_num_path(),
and update_or_create_fnhe() for every path.
Problem is that pmtu is cached only for the oif
that has received icmp message "need to frag",
other oifs will still try to use "default" iface mtu.
An example topology showing the problem:
| host1
+---------+
| dummy0 | 10.179.20.18/32 mtu9000
+---------+
+-----------+----------------+
+---------+ +---------+
| ens17f0 | 10.179.2.141/31 | ens17f1 | 10.179.2.13/31
+---------+ +---------+
| (all here have mtu 9000) |
+------+ +------+
| ro1 | 10.179.2.140/31 | ro2 | 10.179.2.12/31
+------+ +------+
| |
---------+------------+-------------------+------
|
+-----+
| ro3 | 10.10.10.10 mtu1500
+-----+
|
========================================
some networks
========================================
|
+-----+
| eth0| 10.10.30.30 mtu9000
+-----+
| host2
host1 have enabled multipath and
sysctl net.ipv4.fib_multipath_hash_policy = 1:
default proto static src 10.179.20.18
nexthop via 10.179.2.12 dev ens17f1 weight 1
nexthop via 10.179.2.140 dev ens17f0 weight 1
When host1 tries to do pmtud from 10.179.20.18/32 to host2,
host1 receives at ens17f1 iface an icmp packet from ro3 that ro3 mtu=1500.
And host1 caches it in nexthop exceptions cache.
Problem is that it is cached only for the iface that has received icmp,
and there is no way that ro3 will send icmp msg to host1 via another path.
Host1 now have this routes to host2:
ip r g 10.10.30.30 sport 30000 dport 443
10.10.30.30 via 10.179.2.12 dev ens17f1 src 10.179.20.18 uid 0
cache expires 521sec mtu 1500
ip r g 10.10.30.30 sport 30033 dport 443
10.10.30.30 via 10.179.2.140 dev ens17f0 src 10.179.20.18 uid 0
cache
So when host1 tries again to reach host2 with mtu>1500,
if packet flow is lucky enough to be hashed with oif=ens17f1 its ok,
if oif=ens17f0 it blackholes and still gets icmp msgs from ro3 to ens17f1,
until lucky day when ro3 will send it through another flow to ens17f0.
Signed-off-by: Vladimir Vdovin <deliran@verdict.gg>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241108093427.317942-1-deliran@verdict.gg
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 139512191b ("ipv4: use RCU protection in __ip_rt_update_pmtu()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80967b354a ]
If either SIGINT is received twice, or after a SIGALRM (that is, after
timerlat was supposed to stop), abort processing events currently left
in the tracefs buffer and exit immediately.
This allows the user to exit rtla without waiting for processing all
events, should that take longer than wanted, at the cost of not
processing all samples.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250116144931.649593-6-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6899e5603 ]
If either SIGINT is received twice, or after a SIGALRM (that is, after
timerlat was supposed to stop), abort processing events currently left
in the tracefs buffer and exit immediately.
This allows the user to exit rtla without waiting for processing all
events, should that take longer than wanted, at the cost of not
processing all samples.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250116144931.649593-5-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a4dfce7559 upstream.
Currently, when either SIGINT from the user or SIGALRM from the duration
timer is caught by rtla-timerlat, stop_tracing is set to break out of
the main loop. This is not sufficient for cases where the timerlat
tracer is producing more data than rtla can consume, since in that case,
rtla is looping indefinitely inside tracefs_iterate_raw_events, never
reaches the check of stop_tracing and hangs.
In addition to setting stop_tracing, also stop the timerlat tracer on
received signal (SIGINT or SIGALRM). This will stop new samples so that
the existing samples may be processed and tracefs_iterate_raw_events
eventually exits.
Cc: stable@vger.kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250116144931.649593-4-tglozar@redhat.com
Fixes: a828cd18bc ("rtla: Add timerlat tool and timelart top mode")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c73cab9dbe upstream.
Currently, when either SIGINT from the user or SIGALRM from the duration
timer is caught by rtla-timerlat, stop_tracing is set to break out of
the main loop. This is not sufficient for cases where the timerlat
tracer is producing more data than rtla can consume, since in that case,
rtla is looping indefinitely inside tracefs_iterate_raw_events, never
reaches the check of stop_tracing and hangs.
In addition to setting stop_tracing, also stop the timerlat tracer on
received signal (SIGINT or SIGALRM). This will stop new samples so that
the existing samples may be processed and tracefs_iterate_raw_events
eventually exits.
Cc: stable@vger.kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250116144931.649593-3-tglozar@redhat.com
Fixes: 1eeb6328e8 ("rtla/timerlat: Add timerlat hist mode")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e879b5dcf8 upstream.
Support not only turning trace on for the timerlat tracer, but also
turning it off.
This will be used in subsequent patches to stop the timerlat tracer
without also wiping the trace buffer.
Cc: stable@vger.kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250116144931.649593-2-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80d3ba1cf5 upstream.
osnoise_set_workload returns -1 for both missing OSNOISE_WORKLOAD option
and failure in setting the option.
Return -1 for missing and -2 for failure to distinguish them.
Cc: stable@vger.kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20250107144823.239782-2-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5368a67307 upstream.
The '-f' parameter is there to force the kernel to emit MPTCP FASTCLOSE
by closing the connection with unread bytes in the receive queue.
The xdisconnect() helper was used to stop the connection, but it does
more than that: it will shut it down, then wait before reconnecting to
the same address. This causes the mptcp_join's "fastclose test" to fail
all the time.
This failure is due to a recent change, with commit 218cc16632
("selftests: mptcp: avoid spurious errors on disconnect"), but that went
unnoticed because the test is currently ignored. The recent modification
only shown an existing issue: xdisconnect() doesn't need to be used
here, only the shutdown() part is needed.
Fixes: 6bf41020b7 ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250204-net-mptcp-sft-conn-f-v1-1-6b470c72fffa@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 235174b2be ]
Commit 4094871db1 ("udp: only do GSO if # of segs > 1") avoided GSO
for small packets. But the kernel currently dismisses GSO requests only
after checking MTU/PMTU on gso_size. This means any packets, regardless
of their payload sizes, could be dropped when PMTU becomes smaller than
requested gso_size. We encountered this issue in production and it
caused a reliability problem that new QUIC connection cannot be
established before PMTU cache expired, while non GSO sockets still
worked fine at the same time.
Ideally, do not check any GSO related constraints when payload size is
smaller than requested gso_size, and return EMSGSIZE instead of EINVAL
on MTU/PMTU check failure to be more specific on the error cause.
Fixes: 4094871db1 ("udp: only do GSO if # of segs > 1")
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a4e17a8f23 upstream.
In the case of a test that uses the special option ${KERNEL_VERSION} in one
of its settings but has no configuration available in ${OUTPUT_DIR}, for
example if it's a new empty directory, then the `make kernelrelease` call
will fail and the subroutine will chomp an empty string, silently. Fix that
by adding an empty configuration and retrying.
Cc: stable@vger.kernel.org
Cc: John Hawley <warthog9@eaglescrag.net>
Fixes: 5f9b6ced04 ("ktest: Bisecting, install modules, add logging")
Link: https://lore.kernel.org/20241205-ktest_kver_fallback-v2-1-869dae4c7777@suse.com
Signed-off-by: Ricardo B. Marliere <rbm@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 776735b954 ]
Since $output and $ret are not used in the subsequent code, the declarations
should be removed.
Fixes: a75fececff ("ktest: Added sample.conf, new %default option format")
Link: https://lore.kernel.org/20240902130735.6034-1-bajing@cmss.chinamobile.com
Signed-off-by: Ba Jing <bajing@cmss.chinamobile.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e10500b69c ]
Libelf functions do not set errno on failure. Instead, it relies on its
internal _elf_errno value, that can be retrieved via elf_errno (or the
corresponding message via elf_errmsg()). From "man libelf":
If a libelf function encounters an error it will set an internal
error code that can be retrieved with elf_errno. Each thread
maintains its own separate error code. The meaning of each error
code can be determined with elf_errmsg, which returns a string
describing the error.
As a consequence, libbpf should not return -errno when a function from
libelf fails, because an empty value will not be interpreted as an error
and won't prevent the program to stop. This is visible in
bpf_linker__add_file(), for example, where we call a succession of
functions that rely on libelf:
err = err ?: linker_load_obj_file(linker, filename, opts, &obj);
err = err ?: linker_append_sec_data(linker, &obj);
err = err ?: linker_append_elf_syms(linker, &obj);
err = err ?: linker_append_elf_relos(linker, &obj);
err = err ?: linker_append_btf(linker, &obj);
err = err ?: linker_append_btf_ext(linker, &obj);
If the object file that we try to process is not, in fact, a correct
object file, linker_load_obj_file() may fail with errno not being set,
and return 0. In this case we attempt to run linker_append_elf_sysms()
and may segfault.
This can happen (and was discovered) with bpftool:
$ bpftool gen object output.o sample_ret0.bpf.c
libbpf: failed to get ELF header for sample_ret0.bpf.c: invalid `Elf' handle
zsh: segmentation fault (core dumped) bpftool gen object output.o sample_ret0.bpf.c
Fix the issue by returning a non-null error code (-EINVAL) when libelf
functions fail.
Fixes: faf6ed321c ("libbpf: Add BPF static linker APIs")
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241205135942.65262-1-qmo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2f0791124 ]
Commit f803bcf920 ("selftests/bpf: Prevent client connect before
server bind in test_tc_tunnel.sh") added code that waits for the
netcat server to start before the netcat client attempts to connect to
it. However, not all calls to 'server_listen' were guarded.
This patch adds the existing 'wait_for_port' guard after the remaining
call to 'server_listen'.
Fixes: f803bcf920 ("selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh")
Signed-off-by: Marco Leogrande <leogrande@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241202204530.1143448-1-leogrande@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98ebe5ef6f ]
USDT ELF note optionally can record an offset of .stapsdt.base, which is
used to make adjustments to USDT target attach address. Currently,
libbpf will do this address adjustment unconditionally if it finds
.stapsdt.base ELF section in target binary. But there is a corner case
where .stapsdt.base ELF section is present, but specific USDT note
doesn't reference it. In such case, libbpf will basically just add base
address and end up with absolutely incorrect USDT target address.
This adjustment has to be done only if both .stapsdt.sema section is
present and USDT note is recording a reference to it.
Fixes: 74cc6311ce ("libbpf: Add USDT notes parsing and resolution logic")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20241121224558.796110-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2107c35128 ]
The global variable errno may not be set in test_execute(). Do not use
it in related error message.
Cc: Günther Noack <gnoack@google.com>
Fixes: e1199815b4 ("selftests/landlock: Add user space tests")
Link: https://lore.kernel.org/r/20250108154338.1129069-21-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02bc220dc6 ]
intptr_t and uintptr_t are not big enough types on 32-bit architectures
when printing 64-bit values, resulting to the following incorrect
diagnostic output:
# get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (3134324433)
Replace intptr_t and uintptr_t with intmax_t and uintmax_t, respectively.
With this fix, the same test produces more usable diagnostic output:
# get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (18446744072548908753)
Link: https://lore.kernel.org/r/20250108170757.GA6723@strace.io
Fixes: b5bb6d3068 ("selftests/seccomp: fix 32-bit build warnings")
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8694e6a7f7 ]
When adapting the test to the kselftest framework, a few printf() calls
indicating test progress were not updated.
Fix this by replacing these printf() calls by ksft_print_msg() calls.
Link: https://lore.kernel.org/r/7dd4b9ab6e43268846e250878ebf25ae6d3d01ce.1733994134.git.geert+renesas@glider.be
Fixes: ce7d101750 ("selftests: timers: clocksource-switch: adapt to kselftest framework")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d6c0e5851 ]
Commit 'cpupower: Make TSC read per CPU for Mperf monitor' (c2adb1877b)
changes TSC counter reads per cpu, but left time diff global (from start
of all cpus to end of all cpus), thus diff(time) is too large for a
cpu's tsc counting, resulting in far less than acutal TSC_Mhz and thus
`cpupower monitor` showing far less than actual cpu realtime frequency.
/proc/cpuinfo shows frequency:
cat /proc/cpuinfo | egrep -e 'processor' -e 'MHz'
...
processor : 171
cpu MHz : 4108.498
...
before fix (System 100% busy):
| Mperf || Idle_Stats
CPU| C0 | Cx | Freq || POLL | C1 | C2
171| 0.77| 99.23| 2279|| 0.00| 0.00| 0.00
after fix (System 100% busy):
| Mperf || Idle_Stats
CPU| C0 | Cx | Freq || POLL | C1 | C2
171| 0.46| 99.54| 4095|| 0.00| 0.00| 0.00
Fixes: c2adb1877b ("cpupower: Make TSC read per CPU for Mperf monitor")
Signed-off-by: He Rongguang <herongguang@linux.alibaba.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bf66e66d2 ]
Commit c814bf9589 ("powerpc/selftests: Use timersub() for
gettimeofday()"), got the order of arguments to timersub() wrong,
leading to a negative time delta being reported, eg:
test: gettimeofday
tags: git_version:v6.12-rc5-409-gdddf291c3030
time = -3.297781
success: gettimeofday
The correct order is minuend, subtrahend, which in this case is end,
start. Which gives:
test: gettimeofday
tags: git_version:v6.12-rc5-409-gdddf291c3030-dirty
time = 3.300650
success: gettimeofday
Fixes: c814bf9589 ("powerpc/selftests: Use timersub() for gettimeofday()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218114347.428108-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d9ccb18f83 upstream.
Soft lockups have been observed on a cluster of Linux-based edge routers
located in a highly dynamic environment. Using the `bird` service, these
routers continuously update BGP-advertised routes due to frequently
changing nexthop destinations, while also managing significant IPv6
traffic. The lockups occur during the traversal of the multipath
circular linked-list in the `fib6_select_path` function, particularly
while iterating through the siblings in the list. The issue typically
arises when the nodes of the linked list are unexpectedly deleted
concurrently on a different core—indicated by their 'next' and
'previous' elements pointing back to the node itself and their reference
count dropping to zero. This results in an infinite loop, leading to a
soft lockup that triggers a system panic via the watchdog timer.
Apply RCU primitives in the problematic code sections to resolve the
issue. Where necessary, update the references to fib6_siblings to
annotate or use the RCU APIs.
Include a test script that reproduces the issue. The script
periodically updates the routing table while generating a heavy load
of outgoing IPv6 traffic through multiple iperf3 clients. It
consistently induces infinite soft lockups within a couple of minutes.
Kernel log:
0 [ffffbd13003e8d30] machine_kexec at ffffffff8ceaf3eb
1 [ffffbd13003e8d90] __crash_kexec at ffffffff8d0120e3
2 [ffffbd13003e8e58] panic at ffffffff8cef65d4
3 [ffffbd13003e8ed8] watchdog_timer_fn at ffffffff8d05cb03
4 [ffffbd13003e8f08] __hrtimer_run_queues at ffffffff8cfec62f
5 [ffffbd13003e8f70] hrtimer_interrupt at ffffffff8cfed756
6 [ffffbd13003e8fd0] __sysvec_apic_timer_interrupt at ffffffff8cea01af
7 [ffffbd13003e8ff0] sysvec_apic_timer_interrupt at ffffffff8df1b83d
-- <IRQ stack> --
8 [ffffbd13003d3708] asm_sysvec_apic_timer_interrupt at ffffffff8e000ecb
[exception RIP: fib6_select_path+299]
RIP: ffffffff8ddafe7b RSP: ffffbd13003d37b8 RFLAGS: 00000287
RAX: ffff975850b43600 RBX: ffff975850b40200 RCX: 0000000000000000
RDX: 000000003fffffff RSI: 0000000051d383e4 RDI: ffff975850b43618
RBP: ffffbd13003d3800 R8: 0000000000000000 R9: ffff975850b40200
R10: 0000000000000000 R11: 0000000000000000 R12: ffffbd13003d3830
R13: ffff975850b436a8 R14: ffff975850b43600 R15: 0000000000000007
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
9 [ffffbd13003d3808] ip6_pol_route at ffffffff8ddb030c
10 [ffffbd13003d3888] ip6_pol_route_input at ffffffff8ddb068c
11 [ffffbd13003d3898] fib6_rule_lookup at ffffffff8ddf02b5
12 [ffffbd13003d3928] ip6_route_input at ffffffff8ddb0f47
13 [ffffbd13003d3a18] ip6_rcv_finish_core.constprop.0 at ffffffff8dd950d0
14 [ffffbd13003d3a30] ip6_list_rcv_finish.constprop.0 at ffffffff8dd96274
15 [ffffbd13003d3a98] ip6_sublist_rcv at ffffffff8dd96474
16 [ffffbd13003d3af8] ipv6_list_rcv at ffffffff8dd96615
17 [ffffbd13003d3b60] __netif_receive_skb_list_core at ffffffff8dc16fec
18 [ffffbd13003d3be0] netif_receive_skb_list_internal at ffffffff8dc176b3
19 [ffffbd13003d3c50] napi_gro_receive at ffffffff8dc565b9
20 [ffffbd13003d3c80] ice_receive_skb at ffffffffc087e4f5 [ice]
21 [ffffbd13003d3c90] ice_clean_rx_irq at ffffffffc0881b80 [ice]
22 [ffffbd13003d3d20] ice_napi_poll at ffffffffc088232f [ice]
23 [ffffbd13003d3d80] __napi_poll at ffffffff8dc18000
24 [ffffbd13003d3db8] net_rx_action at ffffffff8dc18581
25 [ffffbd13003d3e40] __do_softirq at ffffffff8df352e9
26 [ffffbd13003d3eb0] run_ksoftirqd at ffffffff8ceffe47
27 [ffffbd13003d3ec0] smpboot_thread_fn at ffffffff8cf36a30
28 [ffffbd13003d3ee8] kthread at ffffffff8cf2b39f
29 [ffffbd13003d3f28] ret_from_fork at ffffffff8ce5fa64
30 [ffffbd13003d3f50] ret_from_fork_asm at ffffffff8ce03cbb
Fixes: 66f5d6ce53 ("ipv6: replace rwlock with rcu and spinlock in fib6_table")
Reported-by: Adrian Oliver <kernel@aoliver.ca>
Signed-off-by: Omid Ehtemam-Haghighi <omid.ehtemamhaghighi@menlosecurity.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241106010236.1239299-1-omid.ehtemamhaghighi@menlosecurity.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Rajani Kantha <rajanikantha@engineer.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 218cc16632 upstream.
The disconnect test-case generates spurious errors:
INFO: disconnect
INFO: extra options: -I 3 -i /tmp/tmp.r43niviyoI
01 ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 140ms) [FAIL]
file received by server does not match (in, out):
Unexpected revents: POLLERR/POLLNVAL(19)
-rw-r--r-- 1 root root 10028676 Jan 10 10:47 /tmp/tmp.r43niviyoI.disconnect
Trailing bytes are:
��\����R���!8��u2��5N%
-rw------- 1 root root 9992290 Jan 10 10:47 /tmp/tmp.Os4UbnWbI1
Trailing bytes are:
��\����R���!8��u2��5N%
02 ns1 MPTCP -> ns1 (dead:beef:1::1:10001) MPTCP (duration 206ms) [ OK ]
03 ns1 MPTCP -> ns1 (dead:beef:1::1:10002) TCP (duration 31ms) [ OK ]
04 ns1 TCP -> ns1 (dead:beef:1::1:10003) MPTCP (duration 26ms) [ OK ]
[FAIL] Tests of the full disconnection have failed
Time: 2 seconds
The root cause is actually in the user-space bits: the test program
currently disconnects as soon as all the pending data has been spooled,
generating an FASTCLOSE. If such option reaches the peer before the
latter has reached the closed status, the msk socket will report an
error to the user-space, as per protocol specification, causing the
above failure.
Address the issue explicitly waiting for all the relevant sockets to
reach a closed status before performing the disconnect.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-3-0d986ee7b1b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e95274dfe8 ]
After previous change rshift >= 32 is no longer allowed.
Modify the test to use 31, the test doesn't seem to send
any traffic so the exact value shouldn't matter.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250103182458.1213486-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 724c6ce38b ]
For the most part of the C++ history, it couldn't have type
declarations inside anonymous unions for different reasons. At the
same time, __struct_group() relies on the latters, so when the @TAG
argument is not empty, C++ code doesn't want to build (even under
`extern "C"`):
../linux/include/uapi/linux/pkt_cls.h:25:24: error:
'struct tc_u32_sel::<unnamed union>::tc_u32_sel_hdr,' invalid;
an anonymous union may only have public non-static data members
[-fpermissive]
The safest way to fix this without trying to switch standards (which
is impossible in UAPI anyway) etc., is to disable tag declaration
for that language. This won't break anything since for now it's not
buildable at all.
Use a separate definition for __struct_group() when __cplusplus is
defined to mitigate the error, including the version from tools/.
Fixes: 50d7bd38c3 ("stddef: Introduce struct_group() helper macro")
Reported-by: Christopher Ferris <cferris@google.com>
Closes: https://lore.kernel.org/linux-hardening/Z1HZpe3WE5As8UAz@google.com
Suggested-by: Kees Cook <kees@kernel.org> # __struct_group_tag()
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20241219135734.2130002-1-aleksander.lobakin@intel.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit dda014ba59 upstream.
The syscall instruction is used in Xen PV mode for doing hypercalls.
Allow syscall to be used in the kernel in case it is tagged with an
unwind hint for objtool.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5f2c7ab15f ]
The test assumes that the packet it is sending is the only packet being
passed to the device.
However, it is not the case and so other packets are filling the buffers
as well. Therefore, the test sometimes fails because it is reading a
maximum occupancy that is larger than expected.
Add egress filters on $h1 and $h2 that will guarantee the above.
Fixes: a865ad9996 ("selftests: mlxsw: Add shared buffer traffic test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/64c28bc9b1cc1d78c4a73feda7cedbe9526ccf8b.1733414773.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c46ad4d1b ]
On both port_tc_ip_test() and port_tc_arp_test(), the max occupancy is
checked on $h2 twice, when only the error message is different and does not
match the check itself.
Remove the two duplicated test cases from the test.
Fixes: a865ad9996 ("selftests: mlxsw: Add shared buffer traffic test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/d9eb26f6fc16a06a30b5c2c16ad80caf502bc561.1733414773.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf3515c556 ]
The test is sending only one packet generated with mausezahn from $h1 to
$h2. However, for some reason, it is testing for non-zero maximum occupancy
in both the ingress pool of $h1 and $h2. The former only passes when $h2
happens to send a packet.
Avoid intermittent failures by removing unintentional test case
regarding the ingress pool of $h1.
Fixes: a865ad9996 ("selftests: mlxsw: Add shared buffer traffic test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/5b7344608d5e06f38209e48d8af8c92fa11b6742.1733414773.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 571f8b3f86 ]
This patch makes the dot parser used by dot2c and dot2k slightly more
robust, namely:
* allows parsing files with the gv extension (GraphViz)
* correctly parses edges with any indentation
* used to work only with a single character (e.g. '\t')
Additionally it fixes a couple of warnings reported by pylint such as
wrong indentation and comparison to False instead of `not ...`
Link: https://lore.kernel.org/20241017064238.41394-2-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
