commit 50f930db22 upstream.
If ksmbd_iov_pin_rsp return error, use-after-free can happen by
accessing opinfo->state and opinfo_put and ksmbd_fd_put could
called twice.
Reported-by: Ziyan Xu <research@securitygossip.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1961d20f6f ]
When building the free space tree with the block group tree feature
enabled, we can hit an assertion failure like this:
BTRFS info (device loop0 state M): rebuilding free space tree
assertion failed: ret == 0, in fs/btrfs/free-space-tree.c:1102
------------[ cut here ]------------
kernel BUG at fs/btrfs/free-space-tree.c:1102!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
Modules linked in:
CPU: 1 UID: 0 PID: 6592 Comm: syz-executor322 Not tainted 6.15.0-rc7-syzkaller-gd7fa1af5b33e #0 PREEMPT
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102
lr : populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102
sp : ffff8000a4ce7600
x29: ffff8000a4ce76e0 x28: ffff0000c9bc6000 x27: ffff0000ddfff3d8
x26: ffff0000ddfff378 x25: dfff800000000000 x24: 0000000000000001
x23: ffff8000a4ce7660 x22: ffff70001499cecc x21: ffff0000e1d8c160
x20: ffff0000e1cb7800 x19: ffff0000e1d8c0b0 x18: 00000000ffffffff
x17: ffff800092f39000 x16: ffff80008ad27e48 x15: ffff700011e740c0
x14: 1ffff00011e740c0 x13: 0000000000000004 x12: ffffffffffffffff
x11: ffff700011e740c0 x10: 0000000000ff0100 x9 : 94ef24f55d2dbc00
x8 : 94ef24f55d2dbc00 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff8000a4ce6f98 x4 : ffff80008f415ba0 x3 : ffff800080548ef0
x2 : 0000000000000000 x1 : 0000000100000000 x0 : 000000000000003e
Call trace:
populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102 (P)
btrfs_rebuild_free_space_tree+0x14c/0x54c fs/btrfs/free-space-tree.c:1337
btrfs_start_pre_rw_mount+0xa78/0xe10 fs/btrfs/disk-io.c:3074
btrfs_remount_rw fs/btrfs/super.c:1319 [inline]
btrfs_reconfigure+0x828/0x2418 fs/btrfs/super.c:1543
reconfigure_super+0x1d4/0x6f0 fs/super.c:1083
do_remount fs/namespace.c:3365 [inline]
path_mount+0xb34/0xde0 fs/namespace.c:4200
do_mount fs/namespace.c:4221 [inline]
__do_sys_mount fs/namespace.c:4432 [inline]
__se_sys_mount fs/namespace.c:4409 [inline]
__arm64_sys_mount+0x3e8/0x468 fs/namespace.c:4409
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
Code: f0047182 91178042 528089c3 9771d47b (d4210000)
---[ end trace 0000000000000000 ]---
This happens because we are processing an empty block group, which has
no extents allocated from it, there are no items for this block group,
including the block group item since block group items are stored in a
dedicated tree when using the block group tree feature. It also means
this is the block group with the highest start offset, so there are no
higher keys in the extent root, hence btrfs_search_slot_for_read()
returns 1 (no higher key found).
Fix this by asserting 'ret' is 0 only if the block group tree feature
is not enabled, in which case we should find a block group item for
the block group since it's stored in the extent root and block group
item keys are greater than extent item keys (the value for
BTRFS_BLOCK_GROUP_ITEM_KEY is 192 and for BTRFS_EXTENT_ITEM_KEY and
BTRFS_METADATA_ITEM_KEY the values are 168 and 169 respectively).
In case 'ret' is 1, we just need to add a record to the free space
tree which spans the whole block group, and we can achieve this by
making 'ret == 0' as the while loop's condition.
Reported-by: syzbot+36fae25c35159a763a2a@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/6841dca8.a00a0220.d4325.0020.GAE@google.com/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ab5eed600 ]
On-stack pagepool is used so that short-lived temporary pages could be
shared within a single I/O request (e.g. among multiple pclusters).
Moving the remaining frontend-related uses into
z_erofs_decompress_frontend to avoid too many arguments.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Link: https://lore.kernel.org/r/20230526201459.128169-3-hsiangkao@linux.alibaba.com
Stable-dep-of: 99f7619a77 ("erofs: fix to add missing tracepoint in erofs_read_folio()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05b63d2beb ]
If non-bootstrap bvecs cannot be kept in place (very rarely), an extra
short-lived page is allocated.
Let's just allocate it immediately rather than do unnecessary -EAGAIN
return first and retry as a cleanup. Also it's unnecessary to use
__GFP_NOFAIL here since we could gracefully fail out this case instead.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Link: https://lore.kernel.org/r/20230526201459.128169-2-hsiangkao@linux.alibaba.com
Stable-dep-of: 99f7619a77 ("erofs: fix to add missing tracepoint in erofs_read_folio()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 796e9149a2 ]
`end` parameter is no needed since it's pointless for !backmost, we can
handle it with backmost internally. And we only expand the trailing
edge, so the newstart can be replaced with ->headoffset.
Also, remove linux/prefetch.h inclusion since that is not used anymore
after commit 386292919c ("erofs: introduce readmore decompression
strategy").
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230525072605.17857-1-zbestahu@gmail.com
[ Gao Xiang: update commit description. ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Stable-dep-of: 99f7619a77 ("erofs: fix to add missing tracepoint in erofs_read_folio()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef4b4b46c6 ]
The struct member is only used to add REQ_RAHEAD during I/O submission.
So it is cleaner to pass it as a parameter than keep it in the struct.
Also, rename function z_erofs_get_sync_decompress_policy() to
z_erofs_is_sync_decompress() for better clarity and conciseness.
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230524063944.1655-1-zbestahu@gmail.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Stable-dep-of: 99f7619a77 ("erofs: fix to add missing tracepoint in erofs_read_folio()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c466e33e72 ]
In case the removed directory had a snapshot that was deleted, we are
propagating its inode's last_unlink_trans to the parent directory after
we removed the entry from the parent directory. This leaves a small race
window where someone can log the parent directory after we removed the
entry and before we updated last_unlink_trans, and as a result if we ever
try to replay such a log tree, we will fail since we will attempt to
remove a snapshot during log replay, which is currently not possible and
results in the log replay (and mount) to fail. This is the type of failure
described in commit 1ec9a1ae1e ("Btrfs: fix unreplayable log after
snapshot delete + parent dir fsync").
So fix this by propagating the last_unlink_trans to the parent directory
before we remove the entry from it.
Fixes: 44f714dae5 ("Btrfs: improve performance on fsync against new inode after rename/unlink")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbe4134ea4 ]
Export anon_inode_make_secure_inode() to allow KVM guest_memfd to create
anonymous inodes with proper security context. This replaces the current
pattern of calling alloc_anon_inode() followed by
inode_init_security_anon() for creating security context manually.
This change also fixes a security regression in secretmem where the
S_PRIVATE flag was not cleared after alloc_anon_inode(), causing
LSM/SELinux checks to be bypassed for secretmem file descriptors.
As guest_memfd currently resides in the KVM module, we need to export this
symbol for use outside the core kernel. In the future, guest_memfd might be
moved to core-mm, at which point the symbols no longer would have to be
exported. When/if that happens is still unclear.
Fixes: 2bfe15c526 ("mm: create security context for memfd_secret inodes")
Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Shivank Garg <shivankg@amd.com>
Link: https://lore.kernel.org/20250620070328.803704-3-shivankg@amd.com
Acked-by: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 277627b431 upstream.
If the call of ksmbd_vfs_lock_parent() fails, we drop the parent_path
references and return an error. We need to drop the write access we
just got on parent_path->mnt before we drop the mount reference - callers
assume that ksmbd_vfs_kern_path_locked() returns with mount write
access grabbed if and only if it has returned 0.
Fixes: 864fb5d371 ("ksmbd: fix possible deadlock in smb2_open")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c2b53997e upstream.
The qp is created by rdma_create_qp() as t->cm_id->qp
and t->qp is just a shortcut.
rdma_destroy_qp() also calls ib_destroy_qp(cm_id->qp) internally,
but it is protected by a mutex, clears the cm_id and also calls
trace_cm_qp_destroy().
This should make the tracing more useful as both
rdma_create_qp() and rdma_destroy_qp() are traces and it makes
the code look more sane as functions from the same layer are used
for the specific qp object.
trace-cmd stream -e rdma_cma:cm_qp_create -e rdma_cma:cm_qp_destroy
shows this now while doing a mount and unmount from a client:
<...>-80 [002] 378.514182: cm_qp_create: cm.id=1 src=172.31.9.167:5445 dst=172.31.9.166:37113 tos=0 pd.id=0 qp_type=RC send_wr=867 recv_wr=255 qp_num=1 rc=0
<...>-6283 [001] 381.686172: cm_qp_destroy: cm.id=1 src=172.31.9.167:5445 dst=172.31.9.166:37113 tos=0 qp_num=1
Before we only saw the first line.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <stfrench@microsoft.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b969f96148 ]
There's one case where ->d_compare() can be called for an in-lookup
dentry; usually that's nothing special from ->d_compare() point of
view, but... proc_sys_compare() is weird.
The thing is, /proc/sys subdirectories can look differently for
different processes. Up to and including having the same name
resolve to different dentries - all of them hashed.
The way it's done is ->d_compare() refusing to admit a match unless
this dentry is supposed to be visible to this caller. The information
needed to discriminate between them is stored in inode; it is set
during proc_sys_lookup() and until it's done d_splice_alias() we really
can't tell who should that dentry be visible for.
Normally there's no negative dentries in /proc/sys; we can run into
a dying dentry in RCU dcache lookup, but those can be safely rejected.
However, ->d_compare() is also called for in-lookup dentries, before
they get positive - or hashed, for that matter. In case of match
we will wait until dentry leaves in-lookup state and repeat ->d_compare()
afterwards. In other words, the right behaviour is to treat the
name match as sufficient for in-lookup dentries; if dentry is not
for us, we'll see that when we recheck once proc_sys_lookup() is
done with it.
While we are at it, fix the misspelled READ_ONCE and WRITE_ONCE there.
Fixes: d9171b9345 ("parallel lookups machinery, part 4 (and last)")
Reported-by: NeilBrown <neilb@brown.name>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 157501b046 ]
We are setting the parent directory's last_unlink_trans directly which
may result in a concurrent task starting to log the directory not see the
update and therefore can log the directory after we removed a child
directory which had a snapshot within instead of falling back to a
transaction commit. Replaying such a log tree would result in a mount
failure since we can't currently delete snapshots (and subvolumes) during
log replay. This is the type of failure described in commit 1ec9a1ae1e
("Btrfs: fix unreplayable log after snapshot delete + parent dir fsync").
Fix this by using btrfs_record_snapshot_destroy() which updates the
last_unlink_trans field while holding the inode's log_mutex lock.
Fixes: 44f714dae5 ("Btrfs: improve performance on fsync against new inode after rename/unlink")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38074de35b ]
Allow the flexfiles error handling to recognise NFS level errors (as
opposed to RPC level errors) and handle them separately. The main
motivator is the NFSERR_PERM errors that get returned if the NFS client
connects to the data server through a port number that is lower than
1024. In that case, the client should disconnect and retry a READ on a
different data server, or it should retry a WRITE after reconnecting.
Reviewed-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Fixes: d67ae825a5 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 266b5d02e1 ]
When the SMB server reboots and the client immediately accesses the mount
point, a race condition can occur that causes operations to fail with
"Host is down" error.
Reproduction steps:
# Mount SMB share
mount -t cifs //192.168.245.109/TEST /mnt/ -o xxxx
ls /mnt
# Reboot server
ssh root@192.168.245.109 reboot
ssh root@192.168.245.109 /path/to/cifs_server_setup.sh
ssh root@192.168.245.109 systemctl stop firewalld
# Immediate access fails
ls /mnt
ls: cannot access '/mnt': Host is down
# But works if there is a delay
The issue is caused by a race condition between negotiate and reconnect.
The 20-second negotiate timeout mechanism can interfere with the normal
recovery process when both are triggered simultaneously.
ls cifsd
---------------------------------------------------
cifs_getattr
cifs_revalidate_dentry
cifs_get_inode_info
cifs_get_fattr
smb2_query_path_info
smb2_compound_op
SMB2_open_init
smb2_reconnect
cifs_negotiate_protocol
smb2_negotiate
cifs_send_recv
smb_send_rqst
wait_for_response
cifs_demultiplex_thread
cifs_read_from_socket
cifs_readv_from_socket
server_unresponsive
cifs_reconnect
__cifs_reconnect
cifs_abort_connection
mid->mid_state = MID_RETRY_NEEDED
cifs_wake_up_task
cifs_sync_mid_result
// case MID_RETRY_NEEDED
rc = -EAGAIN;
// In smb2_negotiate()
rc = -EHOSTDOWN;
The server_unresponsive() timeout triggers cifs_reconnect(), which aborts
ongoing mid requests and causes the ls command to receive -EAGAIN, leading
to -EHOSTDOWN.
Fix this by introducing a dedicated `neg_start` field to
precisely tracks when the negotiate process begins. The timeout check
now uses this accurate timestamp instead of `lstrp`, ensuring that:
1. Timeout is only triggered after negotiate has actually run for 20s
2. The mechanism doesn't interfere with concurrent recovery processes
3. Uninitialized timestamps (value 0) don't trigger false timeouts
Fixes: 7ccc146546 ("smb: client: fix hang in wait_for_response() for negproto")
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54a7081ed1 ]
At __inode_add_ref() when processing extrefs, if we jump into the next
label we have an undefined value of victim_name.len, since we haven't
initialized it before we did the goto. This results in an invalid memory
access in the next iteration of the loop since victim_name.len was not
initialized to the length of the name of the current extref.
Fix this by initializing victim_name.len with the current extref's name
length.
Fixes: e43eec81c5 ("btrfs: use struct qstr instead of name and namelen pairs")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6561a40cec ]
During log replay, at __add_inode_ref(), when we are searching for inode
ref keys we totally ignore if btrfs_search_slot() returns an error. This
may make a log replay succeed when there was an actual error and leave
some metadata inconsistency in a subvolume tree. Fix this by checking if
an error was returned from btrfs_search_slot() and if so, return it to
the caller.
Fixes: e02119d5a7 ("Btrfs: Add a write ahead tree log to optimize synchronous operations")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c017762874 ]
We found a few different systems hung up in writeback waiting on the same
page lock, and one task waiting on the NFS_LAYOUT_DRAIN bit in
pnfs_update_layout(), however the pnfs_layout_hdr's plh_outstanding count
was zero.
It seems most likely that this is another race between the waiter and waker
similar to commit ed0172af5d ("SUNRPC: Fix a race to wake a sync task").
Fix it up by applying the advised barrier.
Fixes: 880265c77a ("pNFS: Avoid a live lock condition in pnfs_update_layout()")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4d8cbf6dbc upstream.
Memory for 'struct omfs_extent' and a 'e_extent_count' number of extent
entries is indirectly allocated through 'bh->b_data', which is a pointer
to data within the page. This implies that the member 'e_entry'
(which is the start of extent entries) functions more like an array than
a single object of type 'struct omfs_extent_entry'.
So we better turn this object into a proper array, in this case a
flexible-array member, and with that, fix the following
-Wstringop-overflow warning seen after building s390 architecture with
allyesconfig (GCC 13):
fs/omfs/file.c: In function 'omfs_grow_extent':
include/linux/fortify-string.h:57:33: warning: writing 16 bytes into a region of size 0 [-Wstringop-overflow=]
57 | #define __underlying_memcpy __builtin_memcpy
| ^
include/linux/fortify-string.h:648:9: note: in expansion of macro '__underlying_memcpy'
648 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
include/linux/fortify-string.h:693:26: note: in expansion of macro '__fortify_memcpy_chk'
693 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
fs/omfs/file.c:170:9: note: in expansion of macro 'memcpy'
170 | memcpy(terminator, entry, sizeof(struct omfs_extent_entry));
| ^~~~~~
In file included from fs/omfs/omfs.h:8,
from fs/omfs/file.c:11:
fs/omfs/omfs_fs.h:80:34: note: at offset 16 into destination object 'e_entry' of size 16
80 | struct omfs_extent_entry e_entry; /* start of extent entries */
| ^~~~~~~
There are some binary differences before and after changes, but this are
expected due to the change in the size of 'struct omfs_extent' and the
necessary adjusments.
This helps with the ongoing efforts to globally enable
-Wstringop-overflow.
Link: https://github.com/KSPP/linux/issues/330
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d782d6e1d9 upstream.
Kees pointed out to just use directly ->Buffer instead of pointing
->Buffer using offset not to use unsafe_memcpy().
Suggested-by: Kees Cook <kees@kernel.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dfd046d0ce upstream.
rsp buffer is allocated larger than spnego_blob from
smb2_allocate_rsp_buf().
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae4477f937 upstream.
Each superblock contains a copy of the device item for that device. In a
transaction which drops a chunk but doesn't create any new ones, we were
correctly updating the device item in the chunk tree but not copying
over the new bytes_used value to the superblock.
This can be seen by doing the following:
# dd if=/dev/zero of=test bs=4096 count=2621440
# mkfs.btrfs test
# mount test /root/temp
# cd /root/temp
# for i in {00..10}; do dd if=/dev/zero of=$i bs=4096 count=32768; done
# sync
# rm *
# sync
# btrfs balance start -dusage=0 .
# sync
# cd
# umount /root/temp
# btrfs check test
For btrfs-check to detect this, you will also need my patch at
https://github.com/kdave/btrfs-progs/pull/991.
Change btrfs_remove_dev_extents() so that it adds the devices to the
fs_info->post_commit_list if they're not there already. This causes
btrfs_commit_device_sizes() to be called, which updates the bytes_used
value in the superblock.
Fixes: bbbf7243d6 ("btrfs: combine device update operations during transaction commit")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ca864de85 upstream.
We have a race between a rename and directory inode logging that if it
happens and we crash/power fail before the rename completes, the next time
the filesystem is mounted, the log replay code will end up deleting the
file that was being renamed.
This is best explained following a step by step analysis of an interleaving
of steps that lead into this situation.
Consider the initial conditions:
1) We are at transaction N;
2) We have directories A and B created in a past transaction (< N);
3) We have inode X corresponding to a file that has 2 hardlinks, one in
directory A and the other in directory B, so we'll name them as
"A/foo_link1" and "B/foo_link2". Both hard links were persisted in a
past transaction (< N);
4) We have inode Y corresponding to a file that as a single hard link and
is located in directory A, we'll name it as "A/bar". This file was also
persisted in a past transaction (< N).
The steps leading to a file loss are the following and for all of them we
are under transaction N:
1) Link "A/foo_link1" is removed, so inode's X last_unlink_trans field
is updated to N, through btrfs_unlink() -> btrfs_record_unlink_dir();
2) Task A starts a rename for inode Y, with the goal of renaming from
"A/bar" to "A/baz", so we enter btrfs_rename();
3) Task A inserts the new BTRFS_INODE_REF_KEY for inode Y by calling
btrfs_insert_inode_ref();
4) Because the rename happens in the same directory, we don't set the
last_unlink_trans field of directoty A's inode to the current
transaction id, that is, we don't cal btrfs_record_unlink_dir();
5) Task A then removes the entries from directory A (BTRFS_DIR_ITEM_KEY
and BTRFS_DIR_INDEX_KEY items) when calling __btrfs_unlink_inode()
(actually the dir index item is added as a delayed item, but the
effect is the same);
6) Now before task A adds the new entry "A/baz" to directory A by
calling btrfs_add_link(), another task, task B is logging inode X;
7) Task B starts a fsync of inode X and after logging inode X, at
btrfs_log_inode_parent() it calls btrfs_log_all_parents(), since
inode X has a last_unlink_trans value of N, set at in step 1;
8) At btrfs_log_all_parents() we search for all parent directories of
inode X using the commit root, so we find directories A and B and log
them. Bu when logging direct A, we don't have a dir index item for
inode Y anymore, neither the old name "A/bar" nor for the new name
"A/baz" since the rename has deleted the old name but has not yet
inserted the new name - task A hasn't called yet btrfs_add_link() to
do that.
Note that logging directory A doesn't fallback to a transaction
commit because its last_unlink_trans has a lower value than the
current transaction's id (see step 4);
9) Task B finishes logging directories A and B and gets back to
btrfs_sync_file() where it calls btrfs_sync_log() to persist the log
tree;
10) Task B successfully persisted the log tree, btrfs_sync_log() completed
with success, and a power failure happened.
We have a log tree without any directory entry for inode Y, so the
log replay code deletes the entry for inode Y, name "A/bar", from the
subvolume tree since it doesn't exist in the log tree and the log
tree is authorative for its index (we logged a BTRFS_DIR_LOG_INDEX_KEY
item that covers the index range for the dentry that corresponds to
"A/bar").
Since there's no other hard link for inode Y and the log replay code
deletes the name "A/bar", the file is lost.
The issue wouldn't happen if task B synced the log only after task A
called btrfs_log_new_name(), which would update the log with the new name
for inode Y ("A/bar").
Fix this by pinning the log root during renames before removing the old
directory entry, and unpinning after btrfs_log_new_name() is called.
Fixes: 259c4b96d7 ("btrfs: stop doing unnecessary log updates during a rename")
CC: stable@vger.kernel.org # 5.18+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ce7df19686 ]
If we are propagating across the userns boundary, we need to lock the
mounts added there. However, in case when something has already
been mounted there and we end up sliding a new tree under that,
the stuff that had been there before should not get locked.
IOW, lock_mnt_tree() should be called before we reparent the
preexisting tree on top of what we are adding.
Fixes: 3bd045cc9c ("separate copying and locking mount tree on cross-userns copies")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a920196062 ]
This fixes an analogus bug that was fixed in modern filesystems:
a) xfs in commit 4b8d867ca6 ("xfs: don't over-report free space or
inodes in statvfs")
b) ext4 in commit f87d3af741 ("ext4: don't over-report free space
or inodes in statvfs")
where statfs can report misleading / incorrect information where
project quota is enabled, and the free space is less than the
remaining quota.
This commit will resolve a test failure in generic/762 which tests
for this bug.
generic/762 - output mismatch (see /share/git/fstests/results//generic/762.out.bad)
# --- tests/generic/762.out 2025-04-15 10:21:53.371067071 +0800
# +++ /share/git/fstests/results//generic/762.out.bad 2025-05-13 16:13:37.000000000 +0800
# @@ -6,8 +6,10 @@
# root blocks2 is in range
# dir blocks2 is in range
# root bavail2 is in range
# -dir bavail2 is in range
# +dir bavail2 has value of 1539066
# +dir bavail2 is NOT in range 304734.87 .. 310891.13
# root blocks3 is in range
# ...
# (Run 'diff -u /share/git/fstests/tests/generic/762.out /share/git/fstests/results//generic/762.out.bad' to see the entire diff)
HINT: You _MAY_ be missing kernel fix:
XXXXXXXXXXXXXX xfs: don't over-report free space or inodes in statvfs
Cc: stable@kernel.org
Fixes: ddc34e328d ("f2fs: introduce f2fs_statfs_project")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d250b1c52 ]
Sanity checks have been added to dbMount as individual if clauses with
identical error handling. Move these all into one clause.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Stable-dep-of: 37bfb464dd ("jfs: validate AG parameters in dbMount() to prevent crashes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 547e836661 ]
[BUG]
There is syzbot based reproducer that can crash the kernel, with the
following call trace: (With some debug output added)
DEBUG: rescue=ibadroots parsed
BTRFS: device fsid 14d642db-7b15-43e4-81e6-4b8fac6a25f8 devid 1 transid 8 /dev/loop0 (7:0) scanned by repro (1010)
BTRFS info (device loop0): first mount of filesystem 14d642db-7b15-43e4-81e6-4b8fac6a25f8
BTRFS info (device loop0): using blake2b (blake2b-256-generic) checksum algorithm
BTRFS info (device loop0): using free-space-tree
BTRFS warning (device loop0): checksum verify failed on logical 5312512 mirror 1 wanted 0xb043382657aede36608fd3386d6b001692ff406164733d94e2d9a180412c6003 found 0x810ceb2bacb7f0f9eb2bf3b2b15c02af867cb35ad450898169f3b1f0bd818651 level 0
DEBUG: read tree root path failed for tree csum, ret=-5
BTRFS warning (device loop0): checksum verify failed on logical 5328896 mirror 1 wanted 0x51be4e8b303da58e6340226815b70e3a93592dac3f30dd510c7517454de8567a found 0x51be4e8b303da58e634022a315b70e3a93592dac3f30dd510c7517454de8567a level 0
BTRFS warning (device loop0): checksum verify failed on logical 5292032 mirror 1 wanted 0x1924ccd683be9efc2fa98582ef58760e3848e9043db8649ee382681e220cdee4 found 0x0cb6184f6e8799d9f8cb335dccd1d1832da1071d12290dab3b85b587ecacca6e level 0
process 'repro' launched './file2' with NULL argv: empty string added
DEBUG: no csum root, idatacsums=0 ibadroots=134217728
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f]
CPU: 5 UID: 0 PID: 1010 Comm: repro Tainted: G OE 6.15.0-custom+ #249 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:btrfs_lookup_csum+0x93/0x3d0 [btrfs]
Call Trace:
<TASK>
btrfs_lookup_bio_sums+0x47a/0xdf0 [btrfs]
btrfs_submit_bbio+0x43e/0x1a80 [btrfs]
submit_one_bio+0xde/0x160 [btrfs]
btrfs_readahead+0x498/0x6a0 [btrfs]
read_pages+0x1c3/0xb20
page_cache_ra_order+0x4b5/0xc20
filemap_get_pages+0x2d3/0x19e0
filemap_read+0x314/0xde0
__kernel_read+0x35b/0x900
bprm_execve+0x62e/0x1140
do_execveat_common.isra.0+0x3fc/0x520
__x64_sys_execveat+0xdc/0x130
do_syscall_64+0x54/0x1d0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
---[ end trace 0000000000000000 ]---
[CAUSE]
Firstly the fs has a corrupted csum tree root, thus to mount the fs we
have to go "ro,rescue=ibadroots" mount option.
Normally with that mount option, a bad csum tree root should set
BTRFS_FS_STATE_NO_DATA_CSUMS flag, so that any future data read will
ignore csum search.
But in this particular case, we have the following call trace that
caused NULL csum root, but not setting BTRFS_FS_STATE_NO_DATA_CSUMS:
load_global_roots_objectid():
ret = btrfs_search_slot();
/* Succeeded */
btrfs_item_key_to_cpu()
found = true;
/* We found the root item for csum tree. */
root = read_tree_root_path();
if (IS_ERR(root)) {
if (!btrfs_test_opt(fs_info, IGNOREBADROOTS))
/*
* Since we have rescue=ibadroots mount option,
* @ret is still 0.
*/
break;
if (!found || ret) {
/* @found is true, @ret is 0, error handling for csum
* tree is skipped.
*/
}
This means we completely skipped to set BTRFS_FS_STATE_NO_DATA_CSUMS if
the csum tree is corrupted, which results unexpected later csum lookup.
[FIX]
If read_tree_root_path() failed, always populate @ret to the error
number.
As at the end of the function, we need @ret to determine if we need to
do the extra error handling for csum tree.
Fixes: abed4aaae4 ("btrfs: track the csum, extent, and free space trees in a rb tree")
Reported-by: Zhiyu Zhang <zhiyuzhang999@gmail.com>
Reported-by: Longxing Li <coregee2000@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a39f1c870 ]
In ovl_path_type() and ovl_is_metacopy_dentry() GCC notices that it is
possible for OVL_E() to return NULL (which implies that d_inode(dentry)
may be NULL). This would result in out of bounds reads via container_of(),
seen with GCC 15's -Warray-bounds -fdiagnostics-details. For example:
In file included from arch/x86/include/generated/asm/rwonce.h:1,
from include/linux/compiler.h:339,
from include/linux/export.h:5,
from include/linux/linkage.h:7,
from include/linux/fs.h:5,
from fs/overlayfs/util.c:7:
In function 'ovl_upperdentry_dereference',
inlined from 'ovl_dentry_upper' at ../fs/overlayfs/util.c:305:9,
inlined from 'ovl_path_type' at ../fs/overlayfs/util.c:216:6:
include/asm-generic/rwonce.h:44:26: error: array subscript 0 is outside array bounds of 'struct inode[7486503276667837]' [-Werror=array-bounds=]
44 | #define __READ_ONCE(x) (*(const volatile __unqual_scalar_typeof(x) *)&(x))
| ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/asm-generic/rwonce.h:50:9: note: in expansion of macro '__READ_ONCE'
50 | __READ_ONCE(x); \
| ^~~~~~~~~~~
fs/overlayfs/ovl_entry.h:195:16: note: in expansion of macro 'READ_ONCE'
195 | return READ_ONCE(oi->__upperdentry);
| ^~~~~~~~~
'ovl_path_type': event 1
185 | return inode ? OVL_I(inode)->oe : NULL;
'ovl_path_type': event 2
Avoid this by allowing ovl_dentry_upper() to return NULL if d_inode() is
NULL, as that means the problematic dereferencing can never be reached.
Note that this fixes the over-eager compiler warning in an effort to
being able to enable -Warray-bounds globally. There is no known
behavioral bug here.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0abd87942e ]
In 'ceph_zero_objects', promote 'object_size' to 'u64' to avoid possible
integer overflow.
Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Kandybka <d.kandybka@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc3e0f17f7 ]
If client send SMB2_CREATE_POSIX_CONTEXT to ksmbd, Allow a filename
to contain special characters.
Reported-by: Philipp Kerling <pkerling@casix.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e9a2f8dbe ]
The nfs inodes for referral anchors that have not yet been followed have
their filehandles zeroed out.
Attempting to call getxattr() on one of these will cause the nfs client
to send a GETATTR to the nfs server with the preceding PUTFH sans
filehandle. The server will reply NFS4ERR_NOFILEHANDLE, leading to -EIO
being returned to the application.
For example:
$ strace -e trace=getxattr getfattr -n system.nfs4_acl /mnt/t/ref
getxattr("/mnt/t/ref", "system.nfs4_acl", NULL, 0) = -1 EIO (Input/output error)
/mnt/t/ref: system.nfs4_acl: Input/output error
+++ exited with 1 +++
Have the xattr handlers return -ENODATA instead.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 243fea1346 ]
Currently, when NFS is queried for all the labels present on the
file via a command example "getfattr -d -m . /mnt/testfile", it
does not return the security label. Yet when asked specifically for
the label (getfattr -n security.selinux) it will be returned.
Include the security label when all attributes are queried.
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a3065352f ]
fattr4_numlinks is a recommended attribute, so the client should emulate
it even if the server doesn't support it. In decode_attr_nlink function
in nfs4xdr.c, nlink is initialized to 1. However, this default value
isn't set to the inode due to the check in nfs_fhget.
So if the server doesn't support numlinks, inode's nlink will be zero,
the mount will fail with error "Stale file handle". Set the nlink to 1
if the server doesn't support it.
Signed-off-by: Han Young <hanyang.tony@bytedance.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3e771afbb ]
For TRANS2 QUERY_PATH_INFO request when the path does not exist, the
Windows NT SMB server returns error response STATUS_OBJECT_NAME_NOT_FOUND
or ERRDOS/ERRbadfile without the SMBFLG_RESPONSE flag set. Similarly it
returns STATUS_DELETE_PENDING when the file is being deleted. And looks
like that any error response from TRANS2 QUERY_PATH_INFO does not have
SMBFLG_RESPONSE flag set.
So relax check in check_smb_hdr() for detecting if the packet is response
for this special case.
This change fixes stat() operation against Windows NT SMB servers and also
all operations which depends on -ENOENT result from stat like creat() or
mkdir().
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89381c72d5 ]
[MS-CIFS] specification in section 2.2.4.53.1 where is described
SMB_COM_SESSION_SETUP_ANDX Request, for SessionKey field says:
The client MUST set this field to be equal to the SessionKey field in
the SMB_COM_NEGOTIATE Response for this SMB connection.
Linux SMB client currently set this field to zero. This is working fine
against Windows NT SMB servers thanks to [MS-CIFS] product behavior <94>:
Windows NT Server ignores the client's SessionKey.
For compatibility with [MS-CIFS], set this SessionKey field in Session
Setup Request to value retrieved from Negotiate response.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 34331d7bee upstream.
after fabc4ed200, server_unresponsive add a condition to check whether client
need to reconnect depending on server->lstrp. When client failed to reconnect
for some time and abort connection, server->lstrp is updated for the last time.
In the following scene, server->lstrp is too old. This cause next command
failure in re-negotiation rather than waiting for re-negotiation done.
1. mount -t cifs -o username=Everyone,echo_internal=10 //$server_ip/export /mnt
2. ssh $server_ip "echo b > /proc/sysrq-trigger &"
3. ls /mnt
4. sleep 21s
5. ssh $server_ip "service firewalld stop"
6. ls # return EHOSTDOWN
If the interval between 5 and 6 is too small, 6 may trigger sending negotiation
request. Before backgrounding cifsd thread try to receive negotiation response
from server in cifs_readv_from_socket, server_unresponsive may trigger
cifs_reconnect which cause 6 to be failed:
ls thread
----------------
smb2_negotiate
server->tcpStatus = CifsInNegotiate
compound_send_recv
wait_for_compound_request
cifsd thread
----------------
cifs_readv_from_socket
server_unresponsive
server->tcpStatus == CifsInNegotiate && jiffies > server->lstrp + 20s
cifs_reconnect
cifs_abort_connection: mid_state = MID_RETRY_NEEDED
ls thread
----------------
cifs_sync_mid_result return EAGAIN
smb2_negotiate return EHOSTDOWN
Though server->lstrp means last server response time, it is updated in
cifs_abort_connection and cifs_get_tcp_session. We can also update server->lstrp
before switching into CifsInNegotiate state to avoid failure in 6.
Fixes: 7ccc146546 ("smb: client: fix hang in wait_for_response() for negproto")
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Acked-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: zhangjian <zhangjian496@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ac5b66aca upstream.
If client set ->PreviousSessionId on kerberos session setup stage,
NULL pointer dereference error will happen. Since sess->user is not
set yet, It can pass the user argument as NULL to destroy_previous_session.
sess->user will be set in ksmbd_krb5_authenticate(). So this patch move
calling destroy_previous_session() after ksmbd_krb5_authenticate().
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27391
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72dd7961a4 upstream.
Currently, cached directory contents were not reused across subsequent
'ls' operations because the cache validity check relied on comparing
the ctx pointer, which changes with each readdir invocation. As a
result, the cached dir entries was not marked as valid and the cache was
not utilized for subsequent 'ls' operations.
This change uses the file pointer, which remains consistent across all
readdir calls for a given directory instance, to associate and validate
the cache. As a result, cached directory contents can now be
correctly reused, improving performance for repeated directory listings.
Performance gains with local windows SMB server:
Without the patch and default actimeo=1:
1000 directory enumeration operations on dir with 10k files took 135.0s
With this patch and actimeo=0:
1000 directory enumeration operations on dir with 10k files took just 5.1s
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f396b9bfe upstream.
cifs_reconnect can be called with a flag to mark the session as needing
reconnect too. When this is done, we expect the connections of all
channels to be reconnected too, which is not happening today.
Without doing this, we have seen bad things happen when primary and
secondary channels are connected to different servers (in case of cloud
services like Azure Files SMB).
This change would force all connections to reconnect as well, not just
the sessions and tcons.
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5db0d252c6 upstream.
w/ below testcase, resize will generate a corrupted image which
contains inconsistent metadata, so when mounting such image, it
will trigger kernel panic:
touch img
truncate -s $((512*1024*1024*1024)) img
mkfs.f2fs -f img $((256*1024*1024))
resize.f2fs -s -i img -t $((1024*1024*1024))
mount img /mnt/f2fs
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.h:863!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 11 UID: 0 PID: 3922 Comm: mount Not tainted 6.15.0-rc1+ #191 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:f2fs_ra_meta_pages+0x47c/0x490
Call Trace:
f2fs_build_segment_manager+0x11c3/0x2600
f2fs_fill_super+0xe97/0x2840
mount_bdev+0xf4/0x140
legacy_get_tree+0x2b/0x50
vfs_get_tree+0x29/0xd0
path_mount+0x487/0xaf0
__x64_sys_mount+0x116/0x150
do_syscall_64+0x82/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fdbfde1bcfe
The reaseon is:
sit_i->bitmap_size is 192, so size of sit bitmap is 192*8=1536, at maximum
there are 1536 sit blocks, however MAIN_SEGS is 261893, so that sit_blk_cnt
is 4762, build_sit_entries() -> current_sit_addr() tries to access
out-of-boundary in sit_bitmap at offset from [1536, 4762), once sit_bitmap
and sit_bitmap_mirror is not the same, it will trigger f2fs_bug_on().
Let's add sanity check in f2fs_sanity_check_ckpt() to avoid panic.
Cc: stable@vger.kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a77a028a3 upstream.
The inode i_size cannot be larger than maxbytes, check it while loading
inode from the disk.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250506012009.3896990-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dbe27f06fa upstream.
There are several locations that get the correct maxbytes value based on
the inode's block type. It would be beneficial to extract a common
helper function to make the code more clear.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250506012009.3896990-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32a93f5bc9 upstream.
Luis and David are reporting that after running generic/750 test for 90+
hours on 2k ext4 filesystem, they are able to trigger a warning in
jbd2_journal_dirty_metadata() complaining that there are not enough
credits in the running transaction started in ext4_do_writepages().
Indeed the code in ext4_do_writepages() is racy and the extent tree can
change between the time we compute credits necessary for extent tree
computation and the time we actually modify the extent tree. Thus it may
happen that the number of credits actually needed is higher. Modify
ext4_ext_index_trans_blocks() to count with the worst case of maximum
tree depth. This can reduce the possible number of writers that can
operate in the system in parallel (because the credit estimates now won't
fit in one transaction) but for reasonably sized journals this shouldn't
really be an issue. So just go with a safe and simple fix.
Link: https://lore.kernel.org/all/20250415013641.f2ppw6wov4kn4wq2@offworld
Reported-by: Davidlohr Bueso <dave@stgolabs.net>
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: kdevops@lists.linux.dev
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250429175535.23125-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
