[ Upstream commit 775d3c514c ]
set_rtc_noop(), get_rtc_noop() are after booting, therefore their __init
annotation is wrong.
A crash was observed on an x86 platform where CMOS RTC is unused and
disabled via device tree. set_rtc_noop() was invoked from ntp:
sync_hw_clock(), although CONFIG_RTC_SYSTOHC=n, however sync_cmos_clock()
doesn't honour that.
Workqueue: events_power_efficient sync_hw_clock
RIP: 0010:set_rtc_noop
Call Trace:
update_persistent_clock64
sync_hw_clock
Fix this by dropping the __init annotation from set/get_rtc_noop().
Fixes: c311ed6183 ("x86/init: Allow DT configured systems to disable RTC at boot time")
Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/59f7ceb1-446b-1d3d-0bc8-1f0ee94b1e18@nokia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b277fc793d ]
Platform device helper routines won't update the NUMA distance table
while creating a platform device, even if the device is present on a
NUMA node that doesn't have memory or CPU. This is especially true for
pmem devices. If the target node of the pmem device is not online, we
find the nearest online node to the device and associate the pmem device
with that online node. To find the nearest online node, we should have
the numa distance table updated correctly. Update the distance
information during the device probe.
For a papr scm device on NUMA node 3 distance_lookup_table value for
distance_ref_points_depth = 2 before and after fix is below:
Before fix:
node 3 distance depth 0 - 0
node 3 distance depth 1 - 0
node 4 distance depth 0 - 4
node 4 distance depth 1 - 2
node 5 distance depth 0 - 5
node 5 distance depth 1 - 1
After fix
node 3 distance depth 0 - 3
node 3 distance depth 1 - 1
node 4 distance depth 0 - 4
node 4 distance depth 1 - 2
node 5 distance depth 0 - 5
node 5 distance depth 1 - 1
Without the fix, the nearest numa node to the pmem device (NUMA node 3)
will be picked as 4. After the fix, we get the correct numa node which
is 5.
Fixes: da1115fdbd ("powerpc/nvdimm: Pick nearby online node if the device node is not online")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230404041433.1781804-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f195fc1e97 upstream.
The AMD [1022:15b8] USB controller loses some internal functional MSI-X
context when transitioning from D0 to D3hot. BIOS normally traps D0->D3hot
and D3hot->D0 transitions so it can save and restore that internal context,
but some firmware in the field can't do this because it fails to clear the
AMD_15B8_RCC_DEV2_EPF0_STRAP2 NO_SOFT_RESET bit.
Clear AMD_15B8_RCC_DEV2_EPF0_STRAP2 NO_SOFT_RESET bit before USB controller
initialization during boot.
Link: https://lore.kernel.org/linux-usb/Y%2Fz9GdHjPyF2rNG3@glanzmann.de/T/#u
Link: https://lore.kernel.org/r/20230329172859.699743-1-Basavaraj.Natikar@amd.com
Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Tested-by: Thomas Glanzmann <thomas@glanzmann.de>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d73648274 upstream.
In a NOMMU kernel, sigreturn trampolines are generated on the user
stack by setup_rt_frame. Currently, these trampolines are not instruction
fenced, thus their visibility to ifetch is not guaranteed.
This patch adds a flush_icache_range in setup_rt_frame to fix this
problem.
Signed-off-by: Mathis Salmen <mathis.salmen@matsal.de>
Fixes: 6bd33e1ece ("riscv: add nommu support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230406101130.82304-1-mathis.salmen@matsal.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e5c972c1fa ]
The Hyper-V "EnlightenedNptTlb" enlightenment is always enabled when KVM
is running on top of Hyper-V and Hyper-V exposes support for it (which
is always). On AMD CPUs this enlightenment results in ASID invalidations
not flushing TLB entries derived from the NPT. To force the underlying
(L0) hypervisor to rebuild its shadow page tables, an explicit hypercall
is needed.
The original KVM implementation of Hyper-V's "EnlightenedNptTlb" on SVM
only added remote TLB flush hooks. This worked out fine for a while, as
sufficient remote TLB flushes where being issued in KVM to mask the
problem. Since v5.17, changes in the TDP code reduced the number of
flushes and the out-of-sync TLB prevents guests from booting
successfully.
Split svm_flush_tlb_current() into separate callbacks for the 3 cases
(guest/all/current), and issue the required Hyper-V hypercall when a
Hyper-V TLB flush is needed. The most important case where the TLB flush
was missing is when loading a new PGD, which is followed by what is now
svm_flush_tlb_current().
Cc: stable@vger.kernel.org # v5.17+
Fixes: 1e0c7d4075 ("KVM: SVM: hyper-v: Remote TLB flush for SVM")
Link: https://lore.kernel.org/lkml/43980946-7bbf-dcef-7e40-af904c456250@linux.microsoft.com/
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20230324145233.4585-1-jpiotrowski@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26b516bb39 ]
Now that KVM isn't littered with "struct hv_enlightenments" casts, rename
the struct to "hv_vmcb_enlightenments" to highlight the fact that the
struct is specifically for SVM's VMCB.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stable-dep-of: e5c972c1fa ("KVM: SVM: Flush Hyper-V TLB when required")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68ae7c7bc5 ]
Add a union to provide hv_enlightenments side-by-side with the sw_reserved
bytes that Hyper-V's enlightenments overlay. Casting sw_reserved
everywhere is messy, confusing, and unnecessarily unsafe.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stable-dep-of: e5c972c1fa ("KVM: SVM: Flush Hyper-V TLB when required")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 089fe572a2 ]
Move Hyper-V's VMCB enlightenment definitions to the TLFS header; the
definitions come directly from the TLFS[*], not from KVM.
No functional change intended.
[*] https://learn.microsoft.com/en-us/virtualization/hyper-v-on-windows/tlfs/datatypes/hv_svm_enlightened_vmcb_fields
[vitaly: rename VMCB_HV_ -> HV_VMCB_ to match the rest of
hyperv-tlfs.h, keep svm/hyperv.h]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stable-dep-of: e5c972c1fa ("KVM: SVM: Flush Hyper-V TLB when required")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecd240875e ]
Turns out these two memory regions also need to be avoided, otherwise
weird things will happen when Linux tries to use this memory.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308-lenok-reserved-memory-v1-1-b8bf6ff01207@z3ntu.xyz
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ceac10c83b ]
__copy_to_user_memcpy() and __clear_user_memset() had been calling
memcpy() and memset() respectively, leading to false-positive KASAN
reports when starting userspace:
[ 10.707901] Run /init as init process
[ 10.731892] process '/bin/busybox' started with executable stack
[ 10.745234] ==================================================================
[ 10.745796] BUG: KASAN: user-memory-access in __clear_user_memset+0x258/0x3ac
[ 10.747260] Write of size 2687 at addr 000de581 by task init/1
Use __memcpy() and __memset() instead to allow userspace access, which
is of course the intent of these functions.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e81625218b ]
The existing pKVM code attempts to advertise CSV2/3 using values
initialized to 0, but never set. To advertise CSV2/3 to protected
guests, pass the CSV2/3 values to hyp when initializing hyp's
view of guests' ID_AA64PFR0_EL1.
Similar to non-protected KVM, these are system-wide, rather than
per cpu, for simplicity.
Fixes: 6c30bfb18d ("KVM: arm64: Add handlers for protected VM System Registers")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20230404152321.413064-1-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c165223e9 ]
The nVHE object at EL2 maintains its own copies of some host variables
so that, when pKVM is enabled, the host cannot directly modify the
hypervisor state. When running in normal nVHE mode, however, these
variables are still mirrored at EL2 but are not initialised.
Initialise the hypervisor symbols from the host copies regardless of
pKVM, ensuring that any reference to this data at EL2 with normal nVHE
will return a sensibly initialised value.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110190259.26861-16-will@kernel.org
Stable-dep-of: e81625218b ("KVM: arm64: Advertise ID_AA64PFR0_EL1.CSV2/3 to protected VMs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 738a96c4a8 ]
When BPF_TRAMP_F_CALL_ORIG is set, BPF trampoline uses BLR to jump
back to the instruction next to call site to call the patched function.
For BTI-enabled kernel, the instruction next to call site is usually
PACIASP, in this case, it's safe to jump back with BLR. But when
the call site is not followed by a PACIASP or bti, a BTI exception
is triggered.
Here is a fault log:
Unhandled 64-bit el1h sync exception on CPU0, ESR 0x0000000034000002 -- BTI
CPU: 0 PID: 263 Comm: test_progs Tainted: GF
Hardware name: linux,dummy-virt (DT)
pstate: 40400805 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=-c)
pc : bpf_fentry_test1+0xc/0x30
lr : bpf_trampoline_6442573892_0+0x48/0x1000
sp : ffff80000c0c3a50
x29: ffff80000c0c3a90 x28: ffff0000c2e6c080 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000050
x23: 0000000000000000 x22: 0000ffffcfd2a7f0 x21: 000000000000000a
x20: 0000ffffcfd2a7f0 x19: 0000000000000000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffcfd2a7f0
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: ffff80000914f5e4 x9 : ffff8000082a1528
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0101010101010101
x5 : 0000000000000000 x4 : 00000000fffffff2 x3 : 0000000000000001
x2 : ffff8001f4b82000 x1 : 0000000000000000 x0 : 0000000000000001
Kernel panic - not syncing: Unhandled exception
CPU: 0 PID: 263 Comm: test_progs Tainted: GF
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0xec/0x144
show_stack+0x24/0x7c
dump_stack_lvl+0x8c/0xb8
dump_stack+0x18/0x34
panic+0x1cc/0x3ec
__el0_error_handler_common+0x0/0x130
el1h_64_sync_handler+0x60/0xd0
el1h_64_sync+0x78/0x7c
bpf_fentry_test1+0xc/0x30
bpf_fentry_test1+0xc/0x30
bpf_prog_test_run_tracing+0xdc/0x2a0
__sys_bpf+0x438/0x22a0
__arm64_sys_bpf+0x30/0x54
invoke_syscall+0x78/0x110
el0_svc_common.constprop.0+0x6c/0x1d0
do_el0_svc+0x38/0xe0
el0_svc+0x30/0xd0
el0t_64_sync_handler+0x1ac/0x1b0
el0t_64_sync+0x1a0/0x1a4
Kernel Offset: disabled
CPU features: 0x0000,00034c24,f994fdab
Memory Limit: none
And the instruction next to call site of bpf_fentry_test1 is ADD,
not PACIASP:
<bpf_fentry_test1>:
bti c
nop
nop
add w0, w0, #0x1
paciasp
For BPF prog, JIT always puts a PACIASP after call site for BTI-enabled
kernel, so there is no problem. To fix it, replace BLR with RET to bypass
the branch target check.
Fixes: efc9909fdc ("bpf, arm64: Add bpf trampoline for arm64")
Reported-by: Florent Revest <revest@chromium.org>
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Florent Revest <revest@chromium.org>
Acked-by: Florent Revest <revest@chromium.org>
Link: https://lore.kernel.org/bpf/20230401234144.3719742-1-xukuohai@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6f6a95f25 ]
Just skip the opcode(BPF_ST | BPF_NOSPEC) in the BPF JIT instead of
failing to JIT the entire program, given LoongArch currently has no
couterpart of a speculation barrier instruction. To verify the issue,
use the ltp testcase as shown below.
Also, Wang says:
I can confirm there's currently no speculation barrier equivalent
on LonogArch. (Loongson says there are builtin mitigations for
Spectre-V1 and V2 on their chips, and AFAIK efforts to port the
exploits to mips/LoongArch have all failed a few years ago.)
Without this patch:
$ ./bpf_prog02
[...]
bpf_common.c:123: TBROK: Failed verification: ??? (524)
[...]
Summary:
passed 0
failed 0
broken 1
skipped 0
warnings 0
With this patch:
$ ./bpf_prog02
[...]
Summary:
passed 0
failed 0
broken 0
skipped 0
warnings 0
Fixes: 5dc615520c ("LoongArch: Add BPF JIT support")
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: WANG Xuerui <git@xen0n.name>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/bpf/20230328071335.2664966-1-guodongtai@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f9ea835e99 upstream.
Currently, with VHE, KVM enables the EL0 event counting for the
guest on vcpu_load() or KVM enables it as a part of the PMU
register emulation process, when needed. However, in the migration
case (with VHE), the same handling is lacking, as vPMU register
values that were restored by userspace haven't been propagated yet
(the PMU events haven't been created) at the vcpu load-time on the
first KVM_RUN (kvm_vcpu_pmu_restore_guest() called from vcpu_load()
on the first KVM_RUN won't do anything as events_{guest,host} of
kvm_pmu_events are still zero).
So, with VHE, enable the guest's EL0 event counting on the first
KVM_RUN (after the migration) when needed. More specifically,
have kvm_pmu_handle_pmcr() call kvm_vcpu_pmu_restore_guest()
so that kvm_pmu_handle_pmcr() on the first KVM_RUN can take
care of it.
Fixes: d0c94c4979 ("KVM: arm64: Restore PMU configuration on first run")
Cc: stable@vger.kernel.org
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Link: https://lore.kernel.org/r/20230329023944.2488484-1-reijiw@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80962ec912 upstream.
Don't report an error code to L1 when synthesizing a nested VM-Exit and
L2 is in Real Mode. Per Intel's SDM, regarding the error code valid bit:
This bit is always 0 if the VM exit occurred while the logical processor
was in real-address mode (CR0.PE=0).
The bug was introduced by a recent fix for AMD's Paged Real Mode, which
moved the error code suppression from the common "queue exception" path
to the "inject exception" path, but missed VMX's "synthesize VM-Exit"
path.
Fixes: b97f074583 ("KVM: x86: determine if an exception has an error code only when injecting it.")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230322143300.2209476-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c41468c7c upstream.
When injecting an exception into a vCPU in Real Mode, suppress the error
code by clearing the flag that tracks whether the error code is valid, not
by clearing the error code itself. The "typo" was introduced by recent
fix for SVM's funky Paged Real Mode.
Opportunistically hoist the logic above the tracepoint so that the trace
is coherent with respect to what is actually injected (this was also the
behavior prior to the buggy commit).
Fixes: b97f074583 ("KVM: x86: determine if an exception has an error code only when injecting it.")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230322143300.2209476-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a74fabfbd1 upstream.
ACPI 6.3 introduced the online capable bit, and also introduced MADT
version 5.
Latter was used to distinguish whether the offset storing online capable
could be used. However ACPI 6.2b has MADT version "45" which is for
an errata version of the ACPI 6.2 spec. This means that the Linux code
for detecting availability of MADT will mistakenly flag ACPI 6.2b as
supporting online capable which is inaccurate as it's an ACPI 6.3 feature.
Instead use the FADT major and minor revision fields to distinguish this.
[ bp: Massage. ]
Fixes: aa06e20f1b ("x86/ACPI: Don't add CPUs that are not online capable")
Reported-by: Eric DeVolder <eric.devolder@oracle.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/943d2445-84df-d939-f578-5d8240d342cc@unsolicited.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fed8d8773b upstream.
The logic in acpi_is_processor_usable() requires the online capable
bit be set for hotpluggable CPUs. The online capable bit has been
introduced in ACPI 6.3.
However, for ACPI revisions < 6.3 which do not support that bit, CPUs
should be reported as usable, not the other way around.
Reverse the check.
[ bp: Rewrite commit message. ]
Fixes: e2869bd7af ("x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC")
Suggested-by: Miguel Luis <miguel.luis@oracle.com>
Suggested-by: Boris Ostrovsky <boris.ovstrosky@oracle.com>
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: David R <david@unsolicited.net>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20230327191026.3454-2-eric.devolder@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 32d8599968 ]
Dan reports that smatch complains about a potential uninitialized
variable being used in the compat alignment fixup code.
The logic is not wrong per se, but we do end up using an uninitialized
variable if reading the instruction that triggered the alignment fault
from user space faults, even if the fault ensures that the uninitialized
value doesn't propagate any further.
Given that we just give up and return 1 if any fault occurs when reading
the instruction, let's get rid of the 'success handling' pattern that
captures the fault in a variable and aborts later, and instead, just
return 1 immediately if any of the get_user() calls result in an
exception.
Fixes: 3fc24ef32d ("arm64: compat: Implement misalignment fixups for multiword loads")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202304021214.gekJ8yRc-lkp@intel.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20230404103625.2386382-1-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21f27df854 ]
To determine whether the guest has caused an external interruption loop
upon code 20 (external interrupt) intercepts, the ext_new_psw needs to
be inspected to see whether external interrupts are enabled.
Under non-PV, ext_new_psw can simply be taken from guest lowcore. Under
PV, KVM can only access the encrypted guest lowcore and hence the
ext_new_psw must not be taken from guest lowcore.
handle_external_interrupt() incorrectly did that and hence was not able
to reliably tell whether an external interruption loop is happening or
not. False negatives cause spurious failures of my kvm-unit-test
for extint loops[1] under PV.
Since code 20 is only caused under PV if and only if the guest's
ext_new_psw is enabled for external interrupts, false positive detection
of a external interruption loop can not happen.
Fix this issue by instead looking at the guest PSW in the state
description. Since the PSW swap for external interrupt is done by the
ultravisor before the intercept is caused, this reliably tells whether
the guest is enabled for external interrupts in the ext_new_psw.
Also update the comments to explain better what is happening.
[1] https://lore.kernel.org/kvm/20220812062151.1980937-4-nrb@linux.ibm.com/
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Fixes: 201ae986ea ("KVM: s390: protvirt: Implement interrupt injection")
Link: https://lore.kernel.org/r/20230213085520.100756-2-nrb@linux.ibm.com
Message-Id: <20230213085520.100756-2-nrb@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6da81f650 ]
Presently, when a guest writes 1 to PMCR_EL0.{C,P}, which is WO/RAZ,
KVM saves the register value, including these bits.
When userspace reads the register using KVM_GET_ONE_REG, KVM returns
the saved register value as it is (the saved value might have these
bits set). This could result in userspace setting these bits on the
destination during migration. Consequently, KVM may end up resetting
the vPMU counter registers (PMCCNTR_EL0 and/or PMEVCNTR<n>_EL0) to
zero on the first KVM_RUN after migration.
Fix this by not saving those bits when a guest writes 1 to those bits.
Fixes: ab9468340d ("arm64: KVM: Add access handler for PMCR register")
Cc: stable@vger.kernel.org
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Link: https://lore.kernel.org/r/20230313033234.1475987-1-reijiw@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64d6820d64 ]
Userspace can play some dirty tricks on us by selecting a given
PMU version (such as PMUv3p5), restore a PMCR_EL0 value that
has PMCR_EL0.LP set, and then switch the PMU version to PMUv3p1,
for example. In this situation, we end-up with PMCR_EL0.LP being
set and spreading havoc in the PMU emulation.
This is specially hard as the first two step can be done on
one vcpu and the third step on another, meaning that we need
to sanitise *all* vcpus when the PMU version is changed.
In orer to avoid a pretty complicated locking situation,
defer the sanitisation of PMCR_EL0 to the point where the
vcpu is actually run for the first tine, using the existing
KVM_REQ_RELOAD_PMU request that calls into kvm_pmu_handle_pmcr().
There is still an obscure corner case where userspace could
do the above trick, and then save the VM without running it.
They would then observe an inconsistent state (PMUv3.1 + LP set),
but that state will be fixed on the first run anyway whenever
the guest gets restored on a host.
Reported-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Stable-dep-of: f6da81f650 ("KVM: arm64: PMU: Don't save PMCR_EL0.{C,P} for the vCPU")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c82d28cbf1 ]
The PMU architecture makes a subtle difference between a 64bit
counter and a counter that has a 64bit overflow. This is for example
the case of the cycle counter, which can generate an overflow on
a 32bit boundary if PMCR_EL0.LC==0 despite the accumulation being
done on 64 bits.
Use this distinction in the few cases where it matters in the code,
as we will reuse this with PMUv3p5 long counters.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-5-maz@kernel.org
Stable-dep-of: f6da81f650 ("KVM: arm64: PMU: Don't save PMCR_EL0.{C,P} for the vCPU")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bead02204e ]
Ricardo recently pointed out that the PMU chained counter emulation
in KVM wasn't quite behaving like the one on actual hardware, in
the sense that a chained counter would expose an overflow on
both halves of a chained counter, while KVM would only expose the
overflow on the top half.
The difference is subtle, but significant. What does the architecture
say (DDI0087 H.a):
- Up to PMUv3p4, all counters but the cycle counter are 32bit
- A 32bit counter that overflows generates a CHAIN event on the
adjacent counter after exposing its own overflow status
- The CHAIN event is accounted if the counter is correctly
configured (CHAIN event selected and counter enabled)
This all means that our current implementation (which uses 64bit
perf events) prevents us from emulating this overflow on the lower half.
How to fix this? By implementing the above, to the letter.
This largely results in code deletion, removing the notions of
"counter pair", "chained counters", and "canonical counter".
The code is further restructured to make the CHAIN handling similar
to SWINC, as the two are now extremely similar in behaviour.
Reported-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Link: https://lore.kernel.org/r/20221113163832.3154370-3-maz@kernel.org
Stable-dep-of: f6da81f650 ("KVM: arm64: PMU: Don't save PMCR_EL0.{C,P} for the vCPU")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit aadbd07ff8 upstream.
In the commit referenced below I failed to pay attention to this code
also being buildable as 32-bit. Adjust the type of "ret" - there's no
real need for it to be wider than 32 bits.
Fixes: 934ef33ee7 ("x86/PVH: obtain VGA console info in Dom0")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/2d2193ff-670b-0a27-e12d-2c5c4c121c79@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
commit e86fc1a3a3 upstream.
We walk the userspace PTs to discover what mapping size was
used there. However, this can race against the userspace tables
being freed, and we end-up in the weeds.
Thankfully, the mm code is being generous and will IPI us when
doing so. So let's implement our part of the bargain and disable
interrupts around the walk. This ensures that nothing terrible
happens during that time.
We still need to handle the removal of the page tables before
the walk. For that, allow get_user_mapping_size() to return an
error, and make sure this error can be propagated all the way
to the the exit handler.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230316174546.3777507-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9228b26194 upstream.
Have KVM_GET_ONE_REG for vPMU counter (vPMC) registers (PMCCNTR_EL0
and PMEVCNTR<n>_EL0) return the sum of the register value in the sysreg
file and the current perf event counter value.
Values of vPMC registers are saved in sysreg files on certain occasions.
These saved values don't represent the current values of the vPMC
registers if the perf events for the vPMCs count events after the save.
The current values of those registers are the sum of the sysreg file
value and the current perf event counter value. But, when userspace
reads those registers (using KVM_GET_ONE_REG), KVM returns the sysreg
file value to userspace (not the sum value).
Fix this to return the sum value for KVM_GET_ONE_REG.
Fixes: 051ff581ce ("arm64: KVM: Add access handler for event counter register")
Cc: stable@vger.kernel.org
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Link: https://lore.kernel.org/r/20230313033208.1475499-1-reijiw@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89aba4c26f upstream.
Add missing earlyclobber annotation to size, to, and tmp2 operands of the
__clear_user() inline assembly since they are modified or written to before
the last usage of all input operands. This can lead to incorrect register
allocation for the inline assembly.
Fixes: 6c2a9e6df6 ("[S390] Use alternative user-copy operations for new hardware.")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/all/20230321122514.1743889-3-mark.rutland@arm.com/
Cc: stable@vger.kernel.org
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d3b7a788c upstream.
show_stack dumps raw stack contents which may trigger an unnecessary
KASAN report. Fix it by copying stack contents to a temporary buffer
with __memcpy and then printing that buffer instead of passing stack
pointer directly to the print_hex_dump.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1abce0580b upstream.
Userspace PROT_NONE ptes set _PAGE_PRIVILEGED, triggering a false
positive debug assertion that __pte_flags_need_flush() is not called
on a kernel mapping.
Detect when it is a userspace PROT_NONE page by checking the required
bits of PAGE_NONE are set, and none of the RWX bits are set.
pte_protnone() is insufficient here because it always returns 0 when
CONFIG_NUMA_BALANCING=n.
Fixes: b11931e9ad ("powerpc/64s: add pte_needs_flush and huge_pmd_needs_flush")
Cc: stable@vger.kernel.org # v6.1+
Reported-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230302225947.81083-1-bgray@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eca9f6e6f8 upstream.
The hypervisor supports user-mode NX from Power10.
pseries_vas_dlpar_cpu() is called from lparcfg_write() to update VAS
windows for DLPAR event in shared processor mode and the kernel gets
-ENOTSUPP for HCALLs if the user-mode NX is not supported. The current
VAS implementation also supports only with Radix page tables. Whereas in
dedicated processor mode, pseries_vas_notifier() is registered only if
the copy/paste feature is enabled. So instead of displaying HCALL error
messages, update VAS capabilities if the copy/paste feature is
available.
This patch ignores updating VAS capabilities in pseries_vas_dlpar_cpu()
and returns success if the copy/paste feature is not enabled. Then
lparcfg_write() completes the processor DLPAR operations without any
failures.
Fixes: 2147783d6b ("powerpc/pseries: Use lparcfg to reconfig VAS windows for DLPAR CPU")
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1d0e727e7dbd9a28627ef08ca9df9c86a50175e2.camel@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd72761894 upstream.
powerpc sets up PF_KTHREAD and PF_IO_WORKER with a NULL pt_regs, which
from my (arguably very short) checking is not commonly done for other
archs. This is fine, except when PF_IO_WORKER's have been created and
the task does something that causes a coredump to be generated. Then we
get this crash:
Kernel attempted to read user page (160) - exploit attempt? (uid: 1000)
BUG: Kernel NULL pointer dereference on read at 0x00000160
Faulting instruction address: 0xc0000000000c3a60
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=32 NUMA pSeries
Modules linked in: bochs drm_vram_helper drm_kms_helper xts binfmt_misc ecb ctr syscopyarea sysfillrect cbc sysimgblt drm_ttm_helper aes_generic ttm sg libaes evdev joydev virtio_balloon vmx_crypto gf128mul drm dm_mod fuse loop configfs drm_panel_orientation_quirks ip_tables x_tables autofs4 hid_generic usbhid hid xhci_pci xhci_hcd usbcore usb_common sd_mod
CPU: 1 PID: 1982 Comm: ppc-crash Not tainted 6.3.0-rc2+ #88
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
NIP: c0000000000c3a60 LR: c000000000039944 CTR: c0000000000398e0
REGS: c0000000041833b0 TRAP: 0300 Not tainted (6.3.0-rc2+)
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 88082828 XER: 200400f8
...
NIP memcpy_power7+0x200/0x7d0
LR ppr_get+0x64/0xb0
Call Trace:
ppr_get+0x40/0xb0 (unreliable)
__regset_get+0x180/0x1f0
regset_get_alloc+0x64/0x90
elf_core_dump+0xb98/0x1b60
do_coredump+0x1c34/0x24a0
get_signal+0x71c/0x1410
do_notify_resume+0x140/0x6f0
interrupt_exit_user_prepare_main+0x29c/0x320
interrupt_exit_user_prepare+0x6c/0xa0
interrupt_return_srr_user+0x8/0x138
Because ppr_get() is trying to copy from a PF_IO_WORKER with a NULL
pt_regs.
Check for a valid pt_regs in both ppc_get/ppr_set, and return an error
if not set. The actual error value doesn't seem to be important here, so
just pick -EINVAL.
Fixes: fa439810cc ("powerpc/ptrace: Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[mpe: Trim oops in change log, add Fixes & Cc stable]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/d9f63344-fe7c-56ae-b420-4a1a04a2ae4c@kernel.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6eff380489 ]
In case when VCPU is blocked due to WFI, we schedule the timer
from `kvm_riscv_vcpu_timer_blocking()` to keep timer interrupt
ticking.
But in case when delta_ns comes to be zero, we never schedule
the timer and VCPU keeps sleeping indefinitely until any activity
is done with VM console.
This is easily reproduce-able using kvmtool.
./lkvm-static run -c1 --console virtio -p "earlycon root=/dev/vda" \
-k ./Image -d rootfs.ext4
Also, just add a print in kvm_riscv_vcpu_vstimer_expired() to
check the interrupt delivery and run `top` or similar auto-upating
cmd from guest. Within sometime one can notice that print from
timer expiry routine stops and the `top` cmd output will stop
updating.
This change fixes this by making sure we schedule the timer even
with delta_ns being zero to bring the VCPU out of sleep immediately.
Fixes: 8f5cb44b1b ("RISC-V: KVM: Support sstc extension")
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 934ef33ee7 ]
A new platform-op was added to Xen to allow obtaining the same VGA
console information PV Dom0 is handed. Invoke the new function and have
the output data processed by xen_init_vga().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/8f315e92-7bda-c124-71cc-478ab9c5e610@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c66bb1918 ]
The PE/COFF header has a NX compat flag which informs the firmware that
the application does not rely on memory regions being mapped with both
executable and writable permissions at the same time.
This is typically used by the firmware to decide whether it can set the
NX attribute on all allocations it returns, but going forward, it may be
used to enforce a policy that only permits applications with the NX flag
set to be loaded to begin wiht in some configurations, e.g., when Secure
Boot is in effect.
Even though the arm64 version of the EFI stub may relocate the kernel
before executing it, it always did so after disabling the MMU, and so we
were always in line with what the NX compat flag conveys, we just never
bothered to set it.
So let's set the flag now.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8547649981 ]
In RISCV, we must use an AUIPC + JALR pair to encode an immediate,
forming a jump that jumps to an address over 4K. This may cause errors
if we want to enable kernel preemption and remove dependency from
patching code with stop_machine(). For example, if a task was switched
out on auipc. And, if we changed the ftrace function before it was
switched back, then it would jump to an address that has updated 11:0
bits mixing with previous XLEN:12 part.
p: patched area performed by dynamic ftrace
ftrace_prologue:
p| REG_S ra, -SZREG(sp)
p| auipc ra, 0x? ------------> preempted
...
change ftrace function
...
p| jalr -?(ra) <------------- switched back
p| REG_L ra, -SZREG(sp)
func:
xxx
ret
Fixes: afc76b8b80 ("riscv: Using PATCHABLE_FUNCTION_ENTRY instead of MCOUNT")
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230112090603.1295340-2-guoren@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 672a58fc7c upstream.
The iommu mask should be 0x3f as per Qualcomm internal documentation.
Without the correct mask, the PCIe transactions from the endpoint will
result in SMMU faults. Hence, fix it!
Cc: stable@vger.kernel.org # 5.19
Fixes: a1c86c6805 ("arm64: dts: qcom: sm8150: Add PCIe nodes")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230224080045.6577-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a63441e83 upstream.
If the controller is not marked as cache coherent, then kernel will
try to ensure coherency during dma-ops and that may cause data corruption.
So, mark the PCIe node as dma-coherent as the devices on PCIe bus are
cache coherent.
Cc: stable@vger.kernel.org
Fixes: 92e0ee9f83 ("arm64: dts: qcom: sc7280: Add PCIe and PHY related node")
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1677584952-17496-1-git-send-email-quic_krichai@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e89c2e815e upstream.
There are two related issues that appear in certain combinations with
clang and GNU binutils.
The first occurs when a version of clang that supports zicsr or zifencei
via '-march=' [1] (i.e, >= 17.x) is used in combination with a version
of GNU binutils that do not recognize zicsr and zifencei in the
'-march=' value (i.e., < 2.36):
riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zicsr2p0_zifencei2p0: Invalid or unknown z ISA extension: 'zifencei'
riscv64-linux-gnu-ld: failed to merge target specific data of file fs/efivarfs/file.o
riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zicsr2p0_zifencei2p0: Invalid or unknown z ISA extension: 'zifencei'
riscv64-linux-gnu-ld: failed to merge target specific data of file fs/efivarfs/super.o
The second occurs when a version of clang that does not support zicsr or
zifencei via '-march=' (i.e., <= 16.x) is used in combination with a
version of GNU as that defaults to a newer ISA base spec, which requires
specifying zicsr and zifencei in the '-march=' value explicitly (i.e, >=
2.38):
../arch/riscv/kernel/kexec_relocate.S: Assembler messages:
../arch/riscv/kernel/kexec_relocate.S:147: Error: unrecognized opcode `fence.i', extension `zifencei' required
clang-12: error: assembler command failed with exit code 1 (use -v to see invocation)
This is the same issue addressed by commit 6df2a016c0 ("riscv: fix
build with binutils 2.38") (see [2] for additional information) but
older versions of clang miss out on it because the cc-option check
fails:
clang-12: error: invalid arch name 'rv64imac_zicsr_zifencei', unsupported standard user-level extension 'zicsr'
clang-12: error: invalid arch name 'rv64imac_zicsr_zifencei', unsupported standard user-level extension 'zicsr'
To resolve the first issue, only attempt to add zicsr and zifencei to
the march string when using the GNU assembler 2.38 or newer, which is
when the default ISA spec was updated, requiring these extensions to be
specified explicitly. LLVM implements an older version of the base
specification for all currently released versions, so these instructions
are available as part of the 'i' extension. If LLVM's implementation is
updated in the future, a CONFIG_AS_IS_LLVM condition can be added to
CONFIG_TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI.
To resolve the second issue, use version 2.2 of the base ISA spec when
using an older version of clang that does not support zicsr or zifencei
via '-march=', as that is the spec version most compatible with the one
clang/LLVM implements and avoids the need to specify zicsr and zifencei
explicitly due to still being a part of 'i'.
[1]: 22e199e6af
[2]: https://lore.kernel.org/ZAxT7T9Xy1Fo3d5W@aurel32.net/
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1808
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230313-riscv-zicsr-zifencei-fiasco-v1-1-dd1b7840a551@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a801afd3e upstream.
Currently, we pass the CONTEXTID instead of the ASID to the TLB flush
function. We should only take the ASID field to prevent from touching
the reserved bit field.
Fixes: 3f1e782998 ("riscv: add ASID-based tlbflushing methods")
Signed-off-by: Dylan Jhong <dylan@andestech.com>
Reviewed-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Link: https://lore.kernel.org/r/20230313034906.2401730-1-dylan@andestech.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32f86da7c8 upstream.
The WM8960 Linux driver expects the clock to be named "mclk". Otherwise
the clock will be ignored and not prepared/enabled by the driver.
Fixes: 40ba2eda0a ("arm64: dts: imx8mm-nitrogen-r2: add audio")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b158888402 upstream.
__copy_xstate_to_uabi_buf() copies either from the tasks XSAVE buffer
or from init_fpstate into the ptrace buffer. Dynamic features, like
XTILEDATA, have an all zeroes init state and are not saved in
init_fpstate, which means the corresponding bit is not set in the
xfeatures bitmap of the init_fpstate header.
But __copy_xstate_to_uabi_buf() retrieves addresses for both the tasks
xstate and init_fpstate unconditionally via __raw_xsave_addr().
So if the tasks XSAVE buffer has a dynamic feature set, then the
address retrieval for init_fpstate triggers the warning in
__raw_xsave_addr() which checks the feature bit in the init_fpstate
header.
Remove the address retrieval from init_fpstate for extended features.
They have an all zeroes init state so init_fpstate has zeros for them.
Then zeroing the user buffer for the init state is the same as copying
them from init_fpstate.
Fixes: 2308ee57d9 ("x86/fpu/amx: Enable the AMX feature in 64-bit mode")
Reported-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/kvm/20230221163655.920289-2-mizhang@google.com/
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/all/20230227210504.18520-2-chang.seok.bae%40intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 573b22ccb7 ]
We fetch %SR value from sigframe; it might have been modified by signal
handler, so we can't trust it with any bits that are not modifiable in
user mode.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e36a82bebb ]
__get_kernel_nofault() does copy data in supervisor mode when
forcing a task backtrace log through /proc/sysrq_trigger.
This is expected cause a bus error exception on e.g. NULL
pointer dereferencing when logging a kernel task has no
workqueue associated. This bus error ought to be ignored.
Our 030 bus error handler is ill equipped to deal with this:
Whenever ssw indicates a kernel mode access on a data fault,
we don't even attempt to handle the fault and instead always
send a SEGV signal (or panic). As a result, the check
for exception handling at the fault PC (buried in
send_sig_fault() which gets called from do_page_fault()
eventually) is never used.
In contrast, both 040 and 060 access error handlers do not
care whether a fault happened on supervisor mode access,
and will call do_page_fault() on those, ultimately honoring
the exception table.
Add a check in bus_error030 to call do_page_fault() in case
we do have an entry for the fault PC in our exception table.
I had attempted a fix for this earlier in 2019 that did rely
on testing pagefault_disabled() (see link below) to achieve
the same thing, but this patch should be more generic.
Tested on 030 Atari Falcon.
Reported-by: Eero Tamminen <oak@helsinkinet.fi>
Link: https://lore.kernel.org/r/alpine.LNX.2.21.1904091023540.25@nippy.intranet
Link: https://lore.kernel.org/r/63130691-1984-c423-c1f2-73bfd8d3dcd3@gmail.com
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230301021107.26307-1-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61fc1ee8be ]
Increase COMMAND_LINE_SIZE as the current default value is too low
for syzbot kernel command line.
There has been considerable discussion on this patch that has led to a
larger patch set removing COMMAND_LINE_SIZE from the uapi headers on all
ports. That's not quite done yet, but it's gotten far enough we're
confident this is not a uABI change so this is safe.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Link: https://lore.kernel.org/r/20210316193420.904-1-alex@ghiti.fr
[Palmer: it's not uabi]
Link: https://lore.kernel.org/linux-riscv/874b8076-b0d1-4aaa-bcd8-05d523060152@app.fastmail.com/#t
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
