commit f161cea5a2 upstream.
While testing the ethernet interface on a Variscite symphony carrier
board using an imx8mn SOM with an onboard ADIN1300 PHY (EC hardware
configuration), the ethernet PHY is not detected.
The ADIN1300 datasheet indicate that the "Management interface
active (t4)" state is reached at most 5ms after the reset signal is
deasserted.
The device tree in Variscite custom git repository uses the following
property:
phy-reset-post-delay = <20>;
Add a new MDIO property 'reset-deassert-us' of 20ms to have the same
delay inside the ethphy node. Adding this property fixes the problem
with the PHY detection.
Note that this SOM can also have an Atheros AR8033 PHY. In this case,
a 1ms deassert delay is sufficient. Add a comment to that effect.
Fixes: ade0176dd8 ("arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module")
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2efbafb91e upstream.
Consider the following sequence of events:
1) A page in a PROT_READ|PROT_WRITE VMA is faulted.
2) Page migration allocates a page with the KASAN allocator,
causing it to receive a non-match-all tag, and uses it
to replace the page faulted in 1.
3) The program uses mprotect() to enable PROT_MTE on the page faulted in 1.
As a result of step 3, we are left with a non-match-all tag for a page
with tags accessible to userspace, which can lead to the same kind of
tag check faults that commit e74a684680 ("arm64: Reset KASAN tag in
copy_highpage with HW tags only") intended to fix.
The general invariant that we have for pages in a VMA with VM_MTE_ALLOWED
is that they cannot have a non-match-all tag. As a result of step 2, the
invariant is broken. This means that the fix in the referenced commit
was incomplete and we also need to reset the tag for pages without
PG_mte_tagged.
Fixes: e5b8d92189 ("arm64: mte: reset the page tag in page->flags")
Cc: <stable@vger.kernel.org> # 5.15
Link: https://linux-review.googlesource.com/id/I7409cdd41acbcb215c2a7417c1e50d37b875beff
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230420210945.2313627-1-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4c597f1b3 upstream.
The mte_sync_page_tags() function sets PG_mte_tagged if it initializes
page tags. Then we return to mte_sync_tags(), which sets PG_mte_tagged
again. At best, this is redundant. However, it is possible for
mte_sync_page_tags() to return without having initialized tags for the
page, i.e. in the case where check_swap is true (non-compound page),
is_swap_pte(old_pte) is false and pte_is_tagged is false. So at worst,
we set PG_mte_tagged on a page with uninitialized tags. This can happen
if, for example, page migration causes a PTE for an untagged page to
be replaced. If the userspace program subsequently uses mprotect() to
enable PROT_MTE for that page, the uninitialized tags will be exposed
to userspace.
Fix it by removing the redundant call to set_page_mte_tagged().
Fixes: e059853d14 ("arm64: mte: Fix/clarify the PG_mte_tagged semantics")
Signed-off-by: Peter Collingbourne <pcc@google.com>
Cc: <stable@vger.kernel.org> # 6.1
Link: https://linux-review.googlesource.com/id/Ib02d004d435b2ed87603b858ef7480f7b1463052
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20230420214327.2357985-1-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fbc3a1df28 ]
Drop the qcom,snoc-host-cap-skip-quirk that was never introduced to
solve schema warnings.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230406-topic-ath10k_bindings-v3-2-00895afc7764@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfe9de291b ]
This reduces power consumption in system suspend by about 10%.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0af0537e2 ]
Add missing dwc3 quirks from msm-3.18. Unfortunately, none of them
make `dwc3-qcom 6af8800.usb: HS-PHY not in L2` go away.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230302011849.1873056-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af6c0bd59f ]
Currently only the first attempt to single-step has any effect. After
that all further stepping remains "stuck" at the same program counter
value.
Refer to the ARM Architecture Reference Manual (ARM DDI 0487E.a) D2.12,
PSTATE.SS=1 should be set at each step before transferring the PE to the
'Active-not-pending' state. The problem here is PSTATE.SS=1 is not set
since the second single-step.
After the first single-step, the PE transferes to the 'Inactive' state,
with PSTATE.SS=0 and MDSCR.SS=1, thus PSTATE.SS won't be set to 1 due to
kernel_active_single_step()=true. Then the PE transferes to the
'Active-pending' state when ERET and returns to the debugger by step
exception.
Before this patch:
==================
Entering kdb (current=0xffff3376039f0000, pid 1) on processor 0 due to Keyboard Entry
[0]kdb>
[0]kdb>
[0]kdb> bp write_sysrq_trigger
Instruction(i) BP #0 at 0xffffa45c13d09290 (write_sysrq_trigger)
is enabled addr at ffffa45c13d09290, hardtype=0 installed=0
[0]kdb> go
$ echo h > /proc/sysrq-trigger
Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to Breakpoint @ 0xffffad651a309290
[1]kdb> ss
Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to SS trap @ 0xffffad651a309294
[1]kdb> ss
Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to SS trap @ 0xffffad651a309294
[1]kdb>
After this patch:
=================
Entering kdb (current=0xffff6851c39f0000, pid 1) on processor 0 due to Keyboard Entry
[0]kdb> bp write_sysrq_trigger
Instruction(i) BP #0 at 0xffffc02d2dd09290 (write_sysrq_trigger)
is enabled addr at ffffc02d2dd09290, hardtype=0 installed=0
[0]kdb> go
$ echo h > /proc/sysrq-trigger
Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to Breakpoint @ 0xffffc02d2dd09290
[1]kdb> ss
Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd09294
[1]kdb> ss
Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd09298
[1]kdb> ss
Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd0929c
[1]kdb>
Fixes: 44679a4f14 ("arm64: KGDB: Add step debugging support")
Co-developed-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20230202073148.657746-3-sumit.garg@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14acf21c0d ]
There are 4 qspi data pins: data0, data1, data2, and data3. Currently
we have a shared pin state for data0 and data1 (2 lane config) and a
pin state for data2 and data3 (you'd enable both this and the 2 lane
state for 4 lanes). The second state is obviously misnamed. Fix it.
Fixes: 7720ea001b ("arm64: dts: qcom: sc7280: Add QSPI node")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230323102605.2.I4043491bb24b1e92267c5033d76cdb0fe60934da@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d84f8f2687 ]
There are 4 qspi data pins: data0, data1, data2, and data3. Currently
we have a shared pin state for data0 and data1 (2 lane config) and a
pin state for data2 and data3 (you'd enable both this and the 2 lane
state for 4 lanes). The second state is obviously misnamed. Fix it.
Fixes: ba3fc64963 ("arm64: dts: sc7180: Add qupv3_0 and qupv3_1")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230323102605.1.Ifc1b5be04653f4ab119698a5944bfecded2080d6@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec57cbce1a ]
The PMIC regulators are not supposed to have unit addresses.
Fixes: 2317b87a2a ("arm64: dts: qcom: db820c: Add vdd_gfx and tie it into mmcc")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24f39eec6a ]
The hid-over-i2c takes VDD, not VCC supply. Fix copy-pasta from other
boards which use elan,ekth3000 with valid VCC:
sc7180-trogdor-pazquel360-lte.dtb: trackpad@15: 'vcc-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: fb69f6adaf ("arm64: dts: qcom: sc7180: Add pazquel dts files")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52e2996f25 ]
The hid-over-i2c takes VDD, not VCC supply. Fix copy-pasta from other
boards which use elan,ekth3000 with valid VCC:
sc7180-trogdor-lazor-limozeen-nots-r4.dtb: trackpad@2c: 'vcc-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: 2c26adb8db ("arm64: dts: qcom: Add sc7180-lazor-limozeen skus")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de88b1759b ]
The hid-over-i2c takes VDD, not VCC supply. Fix copy-pasta from other
Herobrine boards which use elan,ekth3000 with valid VCC:
sc7280-herobrine-villager-r1-lte.dtb: trackpad@2c: 'vcc-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: ee2a621160 ("arm64: dts: qcom: sc7280: Add device tree for herobrine villager")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff4c868ba8 ]
The MT8192 SoC specifies a maximum voltage for the GPU's digital supply
of 0.88V and the GPU OPPs are declaring a maximum voltage of 0.80V.
In order to keep the GPU voltage in the safe range, change the maximum
voltage for mt6315@7's vbuck1 to 0.80V as sending, for any mistake,
1.193V would be catastrophic.
Fixes: 3183cb62b0 ("arm64: dts: mediatek: asurada: Add SPMI regulators")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230301095523.428461-12-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0189fdfb7 ]
The PCIe ports are unused (without devices) so disable them instead of
removing them.
Fixes: 7c77ab91b3 ("arm64: dts: apple: Add missing M1 (t8103) devices")
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e57430d248 ]
Add the final "s" to the pgio properties and fix the invalid "enable"
name to the correct "wake", checked against the HDK8450 schematics.
Fixes: bc6588bc25 ("arm64: dts: qcom: sm8450: add PCIe1 root device")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230323-topic-sm8450-upstream-dt-bindings-fixes-v2-4-0ca1bea1a843@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0beda02e53 ]
The "dr_mode" is a property of USB DWC3 node, not the Qualcomm wrapper
one:
sm8350-microsoft-surface-duo2.dtb: usb@a6f8800: 'dr_mode' does not match any of the regexes: '^usb@[0-9a-f]+$', 'pinctrl-[0-9]+'
Fixes: c16160cfa5 ("arm64: dts: qcom: add minimal DTS for Microsoft Surface Duo 2")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304130315.51595-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f57903c8f4 ]
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: bc6588bc25 ("arm64: dts: qcom: sm8450: add PCIe1 root device")
Fixes: 7b09b1b473 ("arm64: dts: qcom: sm8450: add PCIe0 RC device")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-13-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 422b110b9b ]
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: a1c86c6805 ("arm64: dts: qcom: sm8150: Add PCIe nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-12-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e115a4495d ]
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000, 0x64200000) specified in the ranges property for
I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: e53bdfc009 ("arm64: dts: qcom: sm8250: Add PCIe support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf0ac10feb ]
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x0c200000, 0x0d200000, 0x0e200000) specified in the ranges property for
I/O region.
While at it, let's also align the entries.
Fixes: ed965ef892 ("arm64: dts: qcom: msm8996: add support to pcie")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75a6e1fdb3 ]
For 64KiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x10000. Hence, fix the bogus PCI address
(0x20200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: 095bbdd9a5 ("arm64: dts: qcom: ipq6018: Add pcie support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e49eafefe5 ]
For 64KiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x10000. Hence, fix the bogus PCI addresses
(0x10200000, 0x20200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses and align
them in a single line.
Fixes: 33057e1672 ("ARM: dts: ipq8074: Add pcie nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67aa109eee ]
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: 42ad231338 ("arm64: dts: qcom: sdm845: Add second PCIe PHY and controller")
Fixes: 5c538e09cb ("arm64: dts: qcom: sdm845: Add first PCIe controller and PHY")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44750f1536 ]
While stressing EAS on my dragonboard RB3, I have noticed that LITTLE cores
where never selected as the most energy efficient CPU whatever the
utilization level of waking task.
energy model framework uses its cost field to estimate the energy with
the formula:
nrg = cost of the selected OPP * utilization / CPU's max capacity
which ends up selecting the CPU with lowest cost / max capacity ration
as long as the utilization fits in the OPP's capacity.
If we compare the cost of a little OPP with similar capacity of a big OPP
like :
OPP(kHz) OPP capacity cost max capacity cost/max capacity
LITTLE 1766400 407 351114 407 863
big 1056000 408 520267 1024 508
This can be interpreted as the LITTLE core consumes 70% more than big core
for the same compute capacity.
According to [1], LITTLE consumes 10% less than big core for Coremark
benchmark at those OPPs. If we consider that everything else stays
unchanged, the dynamic-power-coefficient of LITTLE core should be
only 53% of the current value: 290 * 53% = 154
Set the dynamic-power-coefficient of CPU0-3 to 154 to fix the energy model.
[1] https://github.com/kdrag0n/freqbench/tree/master/results/sdm845/main
Fixes: 0e0a8e35d7 ("arm64: dts: qcom: sdm845: correct dynamic power coefficients")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106164618.1845281-1-vincent.guittot@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23be9f68f9 ]
This fixes:
arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dtb: leds@800: 'led-lan@19', 'led-power@11', 'led-wan-red@12', 'led-wan-white@15', 'led-wps@14' do not match any of the regexes: '^led@[a-f0-9]+$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/all/20230228144400.21689-2-zajec5@gmail.com/
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f4b30a777 ]
According to latest errata of J721e [1], (i2024) 'MMCSD: Peripherals
Do Not Support HS400' which applies to MMCSD0 subsystem. Speed modes
supported has been already updated but missed dropping 'ti,strobe-sel'
property which is only required by HS400 speed mode.
Thus, drop 'ti,strobe-sel' property from kernel dtsi for J721e SoC.
[1] https://www.ti.com/lit/er/sprz455/sprz455.pdf
Fixes: eb8f6194e8 ("arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Diwakar Dhyani <d-dhyani@ti.com>
Reviewed-by: Nitin Yadav <n-yadav@ti.com>
Link: https://lore.kernel.org/r/20230203073724.29529-1-b-kapoor@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1bc0d6084 ]
All revisions of AM62A7-SK board have 4GB LPDDR4 Micron
MT53E2G32D4DE-046 AUT:B memory. Commit 38c4a08c82 ("arm64: dts: ti:
Add support for AM62A7-SK") enabled just 2GB due to a schematics error
in early revision of the board. Fix it by enabling full 4GB available on
the platform.
Design docs: https://www.ti.com/lit/zip/sprr459
Fixes: 38c4a08c82 ("arm64: dts: ti: Add support for AM62A7-SK")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230314094645.3411599-1-devarsht@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28c8f2189d ]
Fix number of gpio pins in main_gpio0 & main_gpio1
DT nodes according to AM62x SK datasheet. The Link
of datasheet is in the following line:
https://www.ti.com/lit/ds/symlink/am625.pdf?ts=1673852494660
Section: 6.3.10 GPIO (Page No. 63-67)
Fixes: f1d17330a5 ("arm64: dts: ti: Introduce base support for AM62x SoC")
Signed-off-by: Nitin Yadav <n-yadav@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230202085917.3044567-1-n-yadav@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a5c989139 ]
From R01UH0968EJ0100 Rev.1.00 HW manual the interrupt numbers for SSI
channels have been updated,
SPI 329 - SSIF0 is now marked as reserved
SPI 333 - SSIF1 is now marked as reserved
SPI 335 - SSIF2 is now marked as reserved
SPI 336 - SSIF2 is now marked as reserved
SPI 341 - SSIF3 is now marked as reserved
This patch drops the above IRQs from SoC DTSI.
Fixes: 559f2b0708 ("arm64: dts: renesas: r9a07g043: Add SSI{1,2,3} nodes and fillup the SSI0 stub node")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230217185225.43310-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49669da644 ]
Introduce SOC_PERIPHERAL_IRQ() macro to specify interrupt property so
that we can share the common parts of the SoC DTSI with the RZ/Five
(RISC-V) SoC and the RZ/G2UL (ARM64) SoC.
This patch adds a new file r9a07g043u.dtsi to separate out RZ/G2UL
(ARM64) SoC specific parts. No functional changes (same DTB).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221025220629.79321-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Stable-dep-of: 2a5c989139 ("arm64: dts: renesas: r9a07g043: Update IRQ numbers for SSI channels")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2b0dc0e83 ]
From R01UH0936EJ0120 Rev.1.20 HW manual the interrupt numbers for SSI
channels have been updated,
SPI 329 - SSIF0 is now marked as reserved
SPI 333 - SSIF1 is now marked as reserved
SPI 335 - SSIF2 is now marked as reserved
SPI 336 - SSIF2 is now marked as reserved
SPI 341 - SSIF3 is now marked as reserved
This patch drops the above IRQs from SoC DTSI.
Fixes: cd0339ec25 ("arm64: dts: renesas: r9a07g054: Add SSI{1,2,3} nodes and fillup the SSI0 stub node")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230217185225.43310-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5da750ddd9 ]
From R01UH0914EJ0120 Rev.1.20 HW manual the interrupt numbers for SSI
channels have been updated,
SPI 329 - SSIF0 is now marked as reserved
SPI 333 - SSIF1 is now marked as reserved
SPI 335 - SSIF2 is now marked as reserved
SPI 336 - SSIF2 is now marked as reserved
SPI 341 - SSIF3 is now marked as reserved
This patch drops the above IRQs from SoC DTSI.
Fixes: 92a341315a ("arm64: dts: renesas: r9a07g044: Add SSI support")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230217185225.43310-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 554edc3e92 ]
According to the RZ/G Series, 2nd Generation Hardware User’s Manual
Rev. 1.11, the System CPU cores on RZ/G2E do not have their own power
supply, but use the common internal power supply (typical 1.03V).
Hence remove the "opp-microvolt" properties from the Operating
Performance Points table. They are optional, and unused, when none of
the CPU nodes is tied to a regulator using the "cpu-supply" property.
Fixes: 231d8908a6 ("arm64: dts: renesas: r8a774c0: Add OPPs table for cpu devices")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8348e18a011ded94e35919cd8e17c0be1f9acf2f.1676560856.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb76b0fae3 ]
According to the R-Car Series, 3rd Generation Hardware User’s Manual
Rev. 2.30, the System CPU cores on R-Car E3 do not have their own power
supply, but use the common internal power supply (typical 1.03V).
Hence remove the "opp-microvolt" properties from the Operating
Performance Points table. They are optional, and unused, when none of
the CPU nodes is tied to a regulator using the "cpu-supply" property.
Fixes: dd7188eb4e ("arm64: dts: renesas: r8a77990: Add OPPs table for cpu devices")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/9232578d9d395d529f64db3333a371e31327f459.1676560856.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 49e5d16b6f upstream.
commit f003277311 ("KVM: arm64: Use config_lock to protect vgic
state") was meant to rectify a longstanding lock ordering issue in KVM
where the kvm->lock is taken while holding vcpu->mutex. As it so
happens, the aforementioned commit introduced yet another locking issue
by acquiring the its_lock before acquiring the config lock.
This is obviously wrong, especially considering that the lock ordering
is well documented in vgic.c. Reshuffle the locks once more to take the
config_lock before the its_lock. While at it, sprinkle in the lockdep
hinting that has become popular as of late to keep lockdep apprised of
our ordering.
Cc: stable@vger.kernel.org
Fixes: f003277311 ("KVM: arm64: Use config_lock to protect vgic state")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230412062733.988229-1-oliver.upton@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f003277311 upstream.
Almost all of the vgic state is VM-scoped but accessed from the context
of a vCPU. These accesses were serialized on the kvm->lock which cannot
be nested within a vcpu->mutex critical section.
Move over the vgic state to using the config_lock. Tweak the lock
ordering where necessary to ensure that the config_lock is acquired
after the vcpu->mutex. Acquire the config_lock in kvm_vgic_create() to
avoid a race between the converted flows and GIC creation. Where
necessary, continue to acquire kvm->lock to avoid a race with vCPU
creation (i.e. flows that use lock_all_vcpus()).
Finally, promote the locking expectations in comments to lockdep
assertions and update the locking documentation for the config_lock as
well as vcpu->mutex.
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230327164747.2466958-5-oliver.upton@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bba7f7def upstream.
There are various bits of VM-scoped data that can only be configured
before the first call to KVM_RUN, such as the hypercall bitmaps and
the PMU. As these fields are protected by the kvm->lock and accessed
while holding vcpu->mutex, this is yet another example of lock
inversion.
Change out the kvm->lock for kvm->arch.config_lock in all of these
instances. Opportunistically simplify the locking mechanics of the
PMU configuration by holding the config_lock for the entirety of
kvm_arm_pmu_v3_set_attr().
Note that this also addresses a couple of bugs. There is an unguarded
read of the PMU version in KVM_ARM_VCPU_PMU_V3_FILTER which could race
with KVM_ARM_VCPU_PMU_V3_SET_PMU. Additionally, until now writes to the
per-vCPU vPMU irq were not serialized VM-wide, meaning concurrent calls
to KVM_ARM_VCPU_PMU_V3_IRQ could lead to a false positive in
pmu_irq_is_valid().
Cc: stable@vger.kernel.org
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230327164747.2466958-4-oliver.upton@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
