[ Upstream commit 67cad5c670 ]
fw_devlink uses DL_FLAG_SYNC_STATE_ONLY device link flag for two
purposes:
1. To allow a parent device to proxy its child device's dependency on a
supplier so that the supplier doesn't get its sync_state() callback
before the child device/consumer can be added and probed. In this
usage scenario, we need to ignore cycles for ensure correctness of
sync_state() callbacks.
2. When there are dependency cycles in firmware, we don't know which of
those dependencies are valid. So, we have to ignore them all wrt
probe ordering while still making sure the sync_state() callbacks
come correctly.
However, when detecting dependency cycles, there can be multiple
dependency cycles between two devices that we need to detect. For
example:
A -> B -> A and A -> C -> B -> A.
To detect multiple cycles correct, we need to be able to differentiate
DL_FLAG_SYNC_STATE_ONLY device links used for (1) vs (2) above.
To allow this differentiation, add a DL_FLAG_CYCLE that can be use to
mark use case (2). We can then use the DL_FLAG_CYCLE to decide which
DL_FLAG_SYNC_STATE_ONLY device links to follow when looking for
dependency cycles.
Fixes: 2de9d8e0d2 ("driver core: fw_devlink: Improve handling of cyclic dependencies")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4
Link: https://lore.kernel.org/r/20230207014207.1678715-6-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a863678038 ]
Current some drivers(like iscsi) call transport_register_device()
failed, they don't call transport_destroy_device() to release the
memory allocated in transport_setup_device(), because they don't
know what was done, it should be internal thing to release the
resource in register function. So fix this leak by calling destroy
function inside register function.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221110102307.3492557-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33a0a1e3b3 ]
kobject_get_path() does not modify the kobject passed to it, so make the
pointer constant.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20221001165315.2690141-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 3bb2a01caa ("kobject: Fix slab-out-of-bounds in fill_kobj_path()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df24ac7a2e ]
Currently nfsd4_setup_inter_ssc returns the vfsmount of the source
server's export when the mount completes. After the copy is done
nfsd4_cleanup_inter_ssc is called with the vfsmount of the source
server and it searches nfsd_ssc_mount_list for a matching entry
to do the clean up.
The problems with this approach are (1) the need to search the
nfsd_ssc_mount_list and (2) the code has to handle the case where
the matching entry is not found which looks ugly.
The enhancement is instead of nfsd4_setup_inter_ssc returning the
vfsmount, it returns the nfsd4_ssc_umount_item which has the
vfsmount embedded in it. When nfsd4_cleanup_inter_ssc is called
it's passed with the nfsd4_ssc_umount_item directly to do the
clean up so no searching is needed and there is no need to handle
the 'not found' case.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[ cel: adjusted whitespace and variable/function names ]
Reviewed-by: Olga Kornievskaia <kolga@netapp.com>
Stable-dep-of: 34e8f9ec4c ("NFSD: fix leaked reference count of nfsd4_ssc_umount_item")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fdff966bfd ]
Add struct snd_pcm_substream forward declaration
Fixes: 078a85f280 ("ASoC: dapm: Only power up active channels from a DAI")
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230215132851.1626881-1-lucas.tanure@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03a8610555 ]
In certain circumstances, such as when creating I2C-connected HID
devices, we want to pass and retain some quirks (axis inversion, etc).
The source of such quirks may be device tree, or DMI data, or something
else not readily available to the HID core itself and therefore cannot
be reconstructed easily. To allow this, introduce "initial_quirks" field
in hid_device structure and use it when determining the final set of
quirks.
This fixes the problem with i2c-hid setting up device-tree sourced
quirks too late and losing them on device rebind, and also allows to
sever the tie between hid-code and i2c-hid when applying DMI-based
quirks.
Fixes: b60d3c803d ("HID: i2c-hid-of: Expose the touchscreen-inverted properties")
Fixes: a2f416bf06 ("HID: multitouch: Add quirks for flipped axes")
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Tested-by: Allen Ballway <ballway@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/Y+LYwu3Zs13hdVDy@google.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d045bceff5 ]
Some motherboards have multiple HDA codecs connected to the serial bus.
The current code may create multiple mixer controls with the almost
identical identification.
The current code use id.device field from the control element structure
to store the codec address to avoid such clashes for multiple codecs.
Unfortunately, the user space do not handle this correctly. For mixer
controls, only name and index are used for the identifiers.
This patch fixes this problem to compose the index using the codec
address as an offset in case, when the control already exists. It is
really unlikely that one codec will create 10 similar controls.
This patch adds new kernel module parameter 'ctl_dev_id' to allow
select the old behaviour, too. The CONFIG_SND_HDA_CTL_DEV_ID Kconfig
option sets the default value.
BugLink: https://github.com/alsa-project/alsa-lib/issues/294
BugLink: https://github.com/alsa-project/alsa-lib/issues/205
Fixes: 54d1740315 ("[ALSA] hda-codec - Fix connection list parsing")
Fixes: 1afe206ab6 ("ALSA: hda - Try to find an empty control index when it's occupied")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230202092013.4066998-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86bd0c4a2a ]
The Exynos UFS controller only supports scatter/gather list elements that
are aligned on a 4 KiB boundary. Fix DMA alignment in case PAGE_SIZE !=
4096. Rename UFSHCD_QUIRK_ALIGN_SG_WITH_PAGE_SIZE into
UFSHCD_QUIRK_4KB_DMA_ALIGNMENT.
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Fixes: 2b2bfc8aa5 ("scsi: ufs: Introduce a quirk to allow only page-aligned sg entries")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9d27c6be5 ]
The MIPI DCS specification demands that brightness values are sent in
big endian byte order. It also states that one parameter (i.e. one byte)
shall be sent/received for 8 bit wide values, and two parameters shall
be used for values that are between 9 and 16 bits wide.
Add new functions to properly handle 16-bit brightness in big endian,
since the two 8- and 16-bit cases are distinct from each other.
[richard: use separate functions instead of switch/case]
[richard: split into 16-bit component]
Fixes: 1a9d759331 ("drm/dsi: Implement DCS set/get display brightness")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Link: https://android.googlesource.com/kernel/msm/+/754affd62d0ee268c686c53169b1dbb7deac8550
[richard: fix 16-bit brightness_get]
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116224909.23884-2-mailingradian@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8f185e39b ]
The call "skb_copy_from_linear_data(skb, inl + 1, spc)" triggers a FORTIFY
memcpy() warning on ppc64 platform:
In function ‘fortify_memcpy_chk’,
inlined from ‘skb_copy_from_linear_data’ at ./include/linux/skbuff.h:4029:2,
inlined from ‘build_inline_wqe’ at drivers/net/ethernet/mellanox/mlx4/en_tx.c:722:4,
inlined from ‘mlx4_en_xmit’ at drivers/net/ethernet/mellanox/mlx4/en_tx.c:1066:3:
./include/linux/fortify-string.h:513:25: error: call to ‘__write_overflow_field’ declared with
attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()?
[-Werror=attribute-warning]
513 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Same behaviour on x86 you can get if you use "__always_inline" instead of
"inline" for skb_copy_from_linear_data() in skbuff.h
The call here copies data into inlined tx destricptor, which has 104
bytes (MAX_INLINE) space for data payload. In this case "spc" is known
in compile-time but the destination is used with hidden knowledge
(real structure of destination is different from that the compiler
can see). That cause the fortify warning because compiler can check
bounds, but the real bounds are different. "spc" can't be bigger than
64 bytes (MLX4_INLINE_ALIGN), so the data can always fit into inlined
tx descriptor. The fact that "inl" points into inlined tx descriptor is
determined earlier in mlx4_en_xmit().
Avoid confusing the compiler with "inl + 1" constructions to get to past
the inl header by introducing a flexible array "data" to the struct so
that the compiler can see that we are not dealing with an array of inl
structs, but rather, arbitrary data following the structure. There are
no changes to the structure layout reported by pahole, and the resulting
machine code is actually smaller.
Reported-by: Josef Oskera <joskera@redhat.com>
Link: https://lore.kernel.org/lkml/20230217094541.2362873-1-joskera@redhat.com
Fixes: f68f2ff915 ("fortify: Detect struct member overflows in memcpy() at compile-time")
Cc: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20230218183842.never.954-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 997849c4b9 ]
Currently the freed element in bpf memory allocator may be immediately
reused, for htab map the reuse will reinitialize special fields in map
value (e.g., bpf_spin_lock), but lookup procedure may still access
these special fields, and it may lead to hard-lockup as shown below:
NMI backtrace for cpu 16
CPU: 16 PID: 2574 Comm: htab.bin Tainted: G L 6.1.0+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
RIP: 0010:queued_spin_lock_slowpath+0x283/0x2c0
......
Call Trace:
<TASK>
copy_map_value_locked+0xb7/0x170
bpf_map_copy_value+0x113/0x3c0
__sys_bpf+0x1c67/0x2780
__x64_sys_bpf+0x1c/0x20
do_syscall_64+0x30/0x60
entry_SYSCALL_64_after_hwframe+0x46/0xb0
......
</TASK>
For htab map, just like the preallocated case, these is no need to
initialize these special fields in map value again once these fields
have been initialized. For preallocated htab map, these fields are
initialized through __GFP_ZERO in bpf_map_area_alloc(), so do the
similar thing for non-preallocated htab in bpf memory allocator. And
there is no need to use __GFP_ZERO for per-cpu bpf memory allocator,
because __alloc_percpu_gfp() does it implicitly.
Fixes: 0fd7c5d433 ("bpf: Optimize call_rcu in non-preallocated hash map.")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230215082132.3856544-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 584f374289 ]
Add sock_init_data_uid() to explicitly initialize the socket uid.
To initialise the socket uid, sock_init_data() assumes a the struct
socket* sock is always embedded in a struct socket_alloc, used to
access the corresponding inode uid. This may not be true.
Examples are sockets created in tun_chr_open() and tap_open().
Fixes: 86741ec254 ("net: core: Add a UID field to struct sock.")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28319d6dc5 ]
RCU Tasks and PID-namespace unshare can interact in do_exit() in a
complicated circular dependency:
1) TASK A calls unshare(CLONE_NEWPID), this creates a new PID namespace
that every subsequent child of TASK A will belong to. But TASK A
doesn't itself belong to that new PID namespace.
2) TASK A forks() and creates TASK B. TASK A stays attached to its PID
namespace (let's say PID_NS1) and TASK B is the first task belonging
to the new PID namespace created by unshare() (let's call it PID_NS2).
3) Since TASK B is the first task attached to PID_NS2, it becomes the
PID_NS2 child reaper.
4) TASK A forks() again and creates TASK C which get attached to PID_NS2.
Note how TASK C has TASK A as a parent (belonging to PID_NS1) but has
TASK B (belonging to PID_NS2) as a pid_namespace child_reaper.
5) TASK B exits and since it is the child reaper for PID_NS2, it has to
kill all other tasks attached to PID_NS2, and wait for all of them to
die before getting reaped itself (zap_pid_ns_process()).
6) TASK A calls synchronize_rcu_tasks() which leads to
synchronize_srcu(&tasks_rcu_exit_srcu).
7) TASK B is waiting for TASK C to get reaped. But TASK B is under a
tasks_rcu_exit_srcu SRCU critical section (exit_notify() is between
exit_tasks_rcu_start() and exit_tasks_rcu_finish()), blocking TASK A.
8) TASK C exits and since TASK A is its parent, it waits for it to reap
TASK C, but it can't because TASK A waits for TASK B that waits for
TASK C.
Pid_namespace semantics can hardly be changed at this point. But the
coverage of tasks_rcu_exit_srcu can be reduced instead.
The current task is assumed not to be concurrently reapable at this
stage of exit_notify() and therefore tasks_rcu_exit_srcu can be
temporarily relaxed without breaking its constraints, providing a way
out of the deadlock scenario.
[ paulmck: Fix build failure by adding additional declaration. ]
Fixes: 3f95aa81d2 ("rcu: Make TASKS_RCU handle tasks that are almost done exiting")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Eric W . Biederman <ebiederm@xmission.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47904aed89 ]
The type of member ->irqs_sum is unsigned long, but kstat_cpu_irqs_sum()
returns int, which can result in truncation. Therefore, change the
kstat_cpu_irqs_sum() function's return value to unsigned long to avoid
truncation.
Fixes: f2c66cd8ee ("/proc/stat: scalability of irq num per cpu")
Reported-by: Elliott, Robert (Servers) <elliott@hpe.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Josh Don <joshdon@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f8126bb23 ]
sbitmap suffers from code complexity, as demonstrated by recent fixes,
and eventual lost wake ups on nested I/O completion. The later happens,
from what I understand, due to the non-atomic nature of the updates to
wait_cnt, which needs to be subtracted and eventually reset when equal
to zero. This two step process can eventually miss an update when a
nested completion happens to interrupt the CPU in between the wait_cnt
updates. This is very hard to fix, as shown by the recent changes to
this code.
The code complexity arises mostly from the corner cases to avoid missed
wakes in this scenario. In addition, the handling of wake_batch
recalculation plus the synchronization with sbq_queue_wake_up is
non-trivial.
This patchset implements the idea originally proposed by Jan [1], which
removes the need for the two-step updates of wait_cnt. This is done by
tracking the number of completions and wakeups in always increasing,
per-bitmap counters. Instead of having to reset the wait_cnt when it
reaches zero, we simply keep counting, and attempt to wake up N threads
in a single wait queue whenever there is enough space for a batch.
Waking up less than batch_wake shouldn't be a problem, because we
haven't changed the conditions for wake up, and the existing batch
calculation guarantees at least enough remaining completions to wake up
a batch for each queue at any time.
Performance-wise, one should expect very similar performance to the
original algorithm for the case where there is no queueing. In both the
old algorithm and this implementation, the first thing is to check
ws_active, which bails out if there is no queueing to be managed. In the
new code, we took care to avoid accounting completions and wakeups when
there is no queueing, to not pay the cost of atomic operations
unnecessarily, since it doesn't skew the numbers.
For more interesting cases, where there is queueing, we need to take
into account the cross-communication of the atomic operations. I've
been benchmarking by running parallel fio jobs against a single hctx
nullb in different hardware queue depth scenarios, and verifying both
IOPS and queueing.
Each experiment was repeated 5 times on a 20-CPU box, with 20 parallel
jobs. fio was issuing fixed-size randwrites with qd=64 against nullb,
varying only the hardware queue length per test.
queue size 2 4 8 16 32 64
6.1-rc2 1681.1K (1.6K) 2633.0K (12.7K) 6940.8K (16.3K) 8172.3K (617.5K) 8391.7K (367.1K) 8606.1K (351.2K)
patched 1721.8K (15.1K) 3016.7K (3.8K) 7543.0K (89.4K) 8132.5K (303.4K) 8324.2K (230.6K) 8401.8K (284.7K)
The following is a similar experiment, ran against a nullb with a single
bitmap shared by 20 hctx spread across 2 NUMA nodes. This has 40
parallel fio jobs operating on the same device
queue size 2 4 8 16 32 64
6.1-rc2 1081.0K (2.3K) 957.2K (1.5K) 1699.1K (5.7K) 6178.2K (124.6K) 12227.9K (37.7K) 13286.6K (92.9K)
patched 1081.8K (2.8K) 1316.5K (5.4K) 2364.4K (1.8K) 6151.4K (20.0K) 11893.6K (17.5K) 12385.6K (18.4K)
It has also survived blktests and a 12h-stress run against nullb. I also
ran the code against nvme and a scsi SSD, and I didn't observe
performance regression in those. If there are other tests you think I
should run, please let me know and I will follow up with results.
[1] https://lore.kernel.org/all/aef9de29-e9f5-259a-f8be-12d1b734e72@google.com/
Cc: Hugh Dickins <hughd@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Liu Song <liusong@linux.alibaba.com>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20221105231055.25953-1-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: b5fcf7871a ("sbitmap: correct wake_batch recalculation to avoid potential IO hung")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8d84e39d76 upstream.
Now that we made the VFS setgid checking consistent an inode can't be
marked security irrelevant even if the setgid bit is still set. Make
this function consistent with all other helpers.
Note that enforcing consistent setgid stripping checks for file
modification and mode- and ownership changes will cause the setgid bit
to be lost in more cases than useed to be the case. If an unprivileged
user wrote to a non-executable setgid file that they don't have
privilege over the setgid bit will be dropped. This will lead to
temporary failures in some xfstests until they have been updated.
Reported-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed5a7047d2 upstream.
Currently setgid stripping in file_remove_privs()'s should_remove_suid()
helper is inconsistent with other parts of the vfs. Specifically, it only
raises ATTR_KILL_SGID if the inode is S_ISGID and S_IXGRP but not if the
inode isn't in the caller's groups and the caller isn't privileged over the
inode although we require this already in setattr_prepare() and
setattr_copy() and so all filesystem implement this requirement implicitly
because they have to use setattr_{prepare,copy}() anyway.
But the inconsistency shows up in setgid stripping bugs for overlayfs in
xfstests (e.g., generic/673, generic/683, generic/685, generic/686,
generic/687). For example, we test whether suid and setgid stripping works
correctly when performing various write-like operations as an unprivileged
user (fallocate, reflink, write, etc.):
echo "Test 1 - qa_user, non-exec file $verb"
setup_testfile
chmod a+rws $junk_file
commit_and_check "$qa_user" "$verb" 64k 64k
The test basically creates a file with 6666 permissions. While the file has
the S_ISUID and S_ISGID bits set it does not have the S_IXGRP set. On a
regular filesystem like xfs what will happen is:
sys_fallocate()
-> vfs_fallocate()
-> xfs_file_fallocate()
-> file_modified()
-> __file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = ATTR_FORCE | kill;
-> notify_change()
-> setattr_copy()
In should_remove_suid() we can see that ATTR_KILL_SUID is raised
unconditionally because the file in the test has S_ISUID set.
But we also see that ATTR_KILL_SGID won't be set because while the file
is S_ISGID it is not S_IXGRP (see above) which is a condition for
ATTR_KILL_SGID being raised.
So by the time we call notify_change() we have attr->ia_valid set to
ATTR_KILL_SUID | ATTR_FORCE. Now notify_change() sees that
ATTR_KILL_SUID is set and does:
ia_valid = attr->ia_valid |= ATTR_MODE
attr->ia_mode = (inode->i_mode & ~S_ISUID);
which means that when we call setattr_copy() later we will definitely
update inode->i_mode. Note that attr->ia_mode still contains S_ISGID.
Now we call into the filesystem's ->setattr() inode operation which will
end up calling setattr_copy(). Since ATTR_MODE is set we will hit:
if (ia_valid & ATTR_MODE) {
umode_t mode = attr->ia_mode;
vfsgid_t vfsgid = i_gid_into_vfsgid(mnt_userns, inode);
if (!vfsgid_in_group_p(vfsgid) &&
!capable_wrt_inode_uidgid(mnt_userns, inode, CAP_FSETID))
mode &= ~S_ISGID;
inode->i_mode = mode;
}
and since the caller in the test is neither capable nor in the group of the
inode the S_ISGID bit is stripped.
But assume the file isn't suid then ATTR_KILL_SUID won't be raised which
has the consequence that neither the setgid nor the suid bits are stripped
even though it should be stripped because the inode isn't in the caller's
groups and the caller isn't privileged over the inode.
If overlayfs is in the mix things become a bit more complicated and the bug
shows up more clearly. When e.g., ovl_setattr() is hit from
ovl_fallocate()'s call to file_remove_privs() then ATTR_KILL_SUID and
ATTR_KILL_SGID might be raised but because the check in notify_change() is
questioning the ATTR_KILL_SGID flag again by requiring S_IXGRP for it to be
stripped the S_ISGID bit isn't removed even though it should be stripped:
sys_fallocate()
-> vfs_fallocate()
-> ovl_fallocate()
-> file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = ATTR_FORCE | kill;
-> notify_change()
-> ovl_setattr()
// TAKE ON MOUNTER'S CREDS
-> ovl_do_notify_change()
-> notify_change()
// GIVE UP MOUNTER'S CREDS
// TAKE ON MOUNTER'S CREDS
-> vfs_fallocate()
-> xfs_file_fallocate()
-> file_modified()
-> __file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = attr_force | kill;
-> notify_change()
The fix for all of this is to make file_remove_privs()'s
should_remove_suid() helper to perform the same checks as we already
require in setattr_prepare() and setattr_copy() and have notify_change()
not pointlessly requiring S_IXGRP again. It doesn't make any sense in the
first place because the caller must calculate the flags via
should_remove_suid() anyway which would raise ATTR_KILL_SGID.
While we're at it we move should_remove_suid() from inode.c to attr.c
where it belongs with the rest of the iattr helpers. Especially since it
returns ATTR_KILL_S{G,U}ID flags. We also rename it to
setattr_should_drop_suidgid() to better reflect that it indicates both
setuid and setgid bit removal and also that it returns attr flags.
Running xfstests with this doesn't report any regressions. We should really
try and use consistent checks.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99cb0d917f upstream.
Dennis Gilmore reports that the BuildID is missing in the arm64 vmlinux
since commit 994b7ac169 ("arm64: remove special treatment for the
link order of head.o").
The issue is that the type of .notes section, which contains the BuildID,
changed from NOTES to PROGBITS.
Ard Biesheuvel figured out that whichever object gets linked first gets
to decide the type of a section. The PROGBITS type is the result of the
compiler emitting .note.GNU-stack as PROGBITS rather than NOTE.
While Ard provided a fix for arm64, I want to fix this globally because
the same issue is happening on riscv since commit 2348e6bf44 ("riscv:
remove special treatment for the link order of head.o"). This problem
will happen in general for other architectures if they start to drop
unneeded entries from scripts/head-object-list.txt.
Discard .note.GNU-stack in include/asm-generic/vmlinux.lds.h.
Link: https://lore.kernel.org/lkml/CAABkxwuQoz1CTbyb57n0ZX65eSYiTonFCU8-LCQc=74D=xE=rA@mail.gmail.com/
Fixes: 994b7ac169 ("arm64: remove special treatment for the link order of head.o")
Fixes: 2348e6bf44 ("riscv: remove special treatment for the link order of head.o")
Reported-by: Dennis Gilmore <dennis@ausil.us>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74e19ef0ff upstream.
The results of "access_ok()" can be mis-speculated. The result is that
you can end speculatively:
if (access_ok(from, size))
// Right here
even for bad from/size combinations. On first glance, it would be ideal
to just add a speculation barrier to "access_ok()" so that its results
can never be mis-speculated.
But there are lots of system calls just doing access_ok() via
"copy_to_user()" and friends (example: fstat() and friends). Those are
generally not problematic because they do not _consume_ data from
userspace other than the pointer. They are also very quick and common
system calls that should not be needlessly slowed down.
"copy_from_user()" on the other hand uses a user-controller pointer and
is frequently followed up with code that might affect caches. Take
something like this:
if (!copy_from_user(&kernelvar, uptr, size))
do_something_with(kernelvar);
If userspace passes in an evil 'uptr' that *actually* points to a kernel
addresses, and then do_something_with() has cache (or other)
side-effects, it could allow userspace to infer kernel data values.
Add a barrier to the common copy_from_user() code to prevent
mis-speculated values which happen after the copy.
Also add a stub for architectures that do not define barrier_nospec().
This makes the macro usable in generic code.
Since the barrier is now usable in generic code, the x86 #ifdef in the
BPF code can also go away.
Reported-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Daniel Borkmann <daniel@iogearbox.net> # BPF bits
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9181ce3cb5 ]
Create function smp_ata_check_ready_type() for LLDDs to wait for SATA
devices to come up after a link reset.
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Link: https://lore.kernel.org/r/20221118083714.4034612-4-zhanjie9@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 3c2673a09c ("scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus reset")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7bf7f3b81 ]
add_latent_entropy() is called every time a process forks, in
kernel_clone(). This in turn calls add_device_randomness() using the
latent entropy global state. add_device_randomness() does two things:
2) Mixes into the input pool the latent entropy argument passed; and
1) Mixes in a cycle counter, a sort of measurement of when the event
took place, the high precision bits of which are presumably
difficult to predict.
(2) is impossible without CONFIG_GCC_PLUGIN_LATENT_ENTROPY=y. But (1) is
always possible. However, currently CONFIG_GCC_PLUGIN_LATENT_ENTROPY=n
disables both (1) and (2), instead of just (2).
This commit causes the CONFIG_GCC_PLUGIN_LATENT_ENTROPY=n case to still
do (1) by passing NULL (len 0) to add_device_randomness() when add_latent_
entropy() is called.
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Emese Revfy <re.emese@gmail.com>
Fixes: 38addce8b6 ("gcc-plugins: Add latent_entropy plugin")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 710ffe671e ]
Psi polling mechanism is trying to minimize the number of wakeups to
run psi_poll_work and is currently relying on timer_pending() to detect
when this work is already scheduled. This provides a window of opportunity
for psi_group_change to schedule an immediate psi_poll_work after
poll_timer_fn got called but before psi_poll_work could reschedule itself.
Below is the depiction of this entire window:
poll_timer_fn
wake_up_interruptible(&group->poll_wait);
psi_poll_worker
wait_event_interruptible(group->poll_wait, ...)
psi_poll_work
psi_schedule_poll_work
if (timer_pending(&group->poll_timer)) return;
...
mod_timer(&group->poll_timer, jiffies + delay);
Prior to 461daba06b we used to rely on poll_scheduled atomic which was
reset and set back inside psi_poll_work and therefore this race window
was much smaller.
The larger window causes increased number of wakeups and our partners
report visible power regression of ~10mA after applying 461daba06b.
Bring back the poll_scheduled atomic and make this race window even
narrower by resetting poll_scheduled only when we reach polling expiration
time. This does not completely eliminate the possibility of extra wakeups
caused by a race with psi_group_change however it will limit it to the
worst case scenario of one extra wakeup per every tracking window (0.5s
in the worst case).
This patch also ensures correct ordering between clearing poll_scheduled
flag and obtaining changed_states using memory barrier. Correct ordering
between updating changed_states and setting poll_scheduled is ensured by
atomic_xchg operation.
By tracing the number of immediate rescheduling attempts performed by
psi_group_change and the number of these attempts being blocked due to
psi monitor being already active, we can assess the effects of this change:
Before the patch:
Run#1 Run#2 Run#3
Immediate reschedules attempted: 684365 1385156 1261240
Immediate reschedules blocked: 682846 1381654 1258682
Immediate reschedules (delta): 1519 3502 2558
Immediate reschedules (% of attempted): 0.22% 0.25% 0.20%
After the patch:
Run#1 Run#2 Run#3
Immediate reschedules attempted: 882244 770298 426218
Immediate reschedules blocked: 881996 769796 426074
Immediate reschedules (delta): 248 502 144
Immediate reschedules (% of attempted): 0.03% 0.07% 0.03%
The number of non-blocked immediate reschedules dropped from 0.22-0.25%
to 0.03-0.07%. The drop is attributed to the decrease in the race window
size and the fact that we allow this race only when psi monitors reach
polling window expiration time.
Fixes: 461daba06b ("psi: eliminate kthread_worker from psi trigger scheduling mechanism")
Reported-by: Kathleen Chang <yt.chang@mediatek.com>
Reported-by: Wenju Xu <wenju.xu@mediatek.com>
Reported-by: Jonathan Chen <jonathan.jmchen@mediatek.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: SH Chen <show-hong.chen@mediatek.com>
Link: https://lore.kernel.org/r/20221028194541.813985-1-surenb@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3770e52fd4 upstream.
After x86 enabled support for KMSAN, it has become possible to have larger
'struct page' than was expected when commit 5470dea49f ("mm: use
mm_zero_struct_page from SPARC on all 64b architectures") was merged:
include/linux/mm.h:156:10: warning: no case matching constant switch condition '96'
switch (sizeof(struct page)) {
Extend the maximum accordingly.
Link: https://lkml.kernel.org/r/20230130130739.563628-1-arnd@kernel.org
Fixes: 5470dea49f ("mm: use mm_zero_struct_page from SPARC on all 64b architectures")
Fixes: 4ca8cc8d1b ("x86: kmsan: enable KMSAN builds for x86")
Fixes: f80be4571b ("kmsan: add KMSAN runtime core")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca43ccf412 upstream.
Eric Dumazet pointed out [0] that when we call skb_set_owner_r()
for ipv6_pinfo.pktoptions, sk_rmem_schedule() has not been called,
resulting in a negative sk_forward_alloc.
We add a new helper which clones a skb and sets its owner only
when sk_rmem_schedule() succeeds.
Note that we move skb_set_owner_r() forward in (dccp|tcp)_v6_do_rcv()
because tcp_send_synack() can make sk_forward_alloc negative before
ipv6_opt_accepted() in the crossed SYN-ACK or self-connect() cases.
[0]: https://lore.kernel.org/netdev/CANn89iK9oc20Jdi_41jb9URdF210r7d1Y-+uypbMSbOfY6jqrg@mail.gmail.com/
Fixes: 323fbd0edf ("net: dccp: Add handling of IPV6_PKTOPTIONS to dccp_v6_do_rcv()")
Fixes: 3df80d9320 ("[DCCP]: Introduce DCCPv6")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec4288fe63 upstream.
Users can specify the hugetlb page size in the mmap, shmget and
memfd_create system calls. This is done by using 6 bits within the flags
argument to encode the base-2 logarithm of the desired page size. The
routine hstate_sizelog() uses the log2 value to find the corresponding
hugetlb hstate structure. Converting the log2 value (page_size_log) to
potential hugetlb page size is the simple statement:
1UL << page_size_log
Because only 6 bits are used for page_size_log, the left shift can not be
greater than 63. This is fine on 64 bit architectures where a long is 64
bits. However, if a value greater than 31 is passed on a 32 bit
architecture (where long is 32 bits) the shift will result in undefined
behavior. This was generally not an issue as the result of the undefined
shift had to exactly match hugetlb page size to proceed.
Recent improvements in runtime checking have resulted in this undefined
behavior throwing errors such as reported below.
Fix by comparing page_size_log to BITS_PER_LONG before doing shift.
Link: https://lkml.kernel.org/r/20230216013542.138708-1-mike.kravetz@oracle.com
Link: https://lore.kernel.org/lkml/CA+G9fYuei_Tr-vN9GS7SfFyU1y9hNysnf=PB7kT0=yv4MiPgVg@mail.gmail.com/
Fixes: 42d7395feb ("mm: support more pagesizes for MAP_HUGETLB/SHM_HUGETLB")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Jesper Juhl <jesperjuhl76@gmail.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3efc61d952 upstream.
When a fbdev with deferred I/O is once opened and closed, the dirty
pages still remain queued in the pageref list, and eventually later
those may be processed in the delayed work. This may lead to a
corruption of pages, hitting an Oops.
This patch makes sure to cancel the delayed work and clean up the
pageref list at closing the device for addressing the bug. A part of
the cleanup code is factored out as a new helper function that is
called from the common fb_release().
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Miko Larsson <mikoxyzzz@gmail.com>
Fixes: 56c134f7f1 ("fbdev: Track deferred-I/O pages in pageref struct")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230129082856.22113-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit badc28d492 upstream.
The debugfs_remove_recursive() is invoked by unregister_shrinker(), which
is holding the write lock of shrinker_rwsem. It will waits for the
handler of debugfs file complete. The handler also needs to hold the read
lock of shrinker_rwsem to do something. So it may cause the following
deadlock:
CPU0 CPU1
debugfs_file_get()
shrinker_debugfs_count_show()/shrinker_debugfs_scan_write()
unregister_shrinker()
--> down_write(&shrinker_rwsem);
debugfs_remove_recursive()
// wait for (A)
--> wait_for_completion();
// wait for (B)
--> down_read_killable(&shrinker_rwsem)
debugfs_file_put() -- (A)
up_write() -- (B)
The down_read_killable() can be killed, so that the above deadlock can be
recovered. But it still requires an extra kill action, otherwise it will
block all subsequent shrinker-related operations, so it's better to fix
it.
[akpm@linux-foundation.org: fix CONFIG_SHRINKER_DEBUG=n stub]
Link: https://lkml.kernel.org/r/20230202105612.64641-1-zhengqi.arch@bytedance.com
Fixes: 5035ebc644 ("mm: shrinkers: introduce debugfs interface for memory shrinkers")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b38b17b6a0 ]
These flags are only used in ceph filesystem in fs/ceph, so just
move it to the place it should be.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Venky Shankar <vshankar@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54aa39a513 ]
Currently in phy_init_eee() the driver unconditionally configures the PHY
to stop RX_CLK after entering Rx LPI state. This causes an LPI interrupt
storm on my qcs404-base board.
Change the PHY initialization so that for "qcom,qcs404-ethqos" compatible
device RX_CLK continues to run even in Rx LPI state.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b6c7abd1c2 upstream.
After commit 3087c61ed2 ("tools/testing/selftests/bpf: replace open-coded 16 with TASK_COMM_LEN"),
the content of the format file under
/sys/kernel/tracing/events/task/task_newtask was changed from
field:char comm[16]; offset:12; size:16; signed:0;
to
field:char comm[TASK_COMM_LEN]; offset:12; size:16; signed:0;
John reported that this change breaks older versions of perfetto.
Then Mathieu pointed out that this behavioral change was caused by the
use of __stringify(_len), which happens to work on macros, but not on enum
labels. And he also gave the suggestion on how to fix it:
:One possible solution to make this more robust would be to extend
:struct trace_event_fields with one more field that indicates the length
:of an array as an actual integer, without storing it in its stringified
:form in the type, and do the formatting in f_show where it belongs.
The result as follows after this change,
$ cat /sys/kernel/tracing/events/task/task_newtask/format
field:char comm[16]; offset:12; size:16; signed:0;
Link: https://lore.kernel.org/lkml/Y+QaZtz55LIirsUO@google.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230210155921.4610-1-laoar.shao@gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230212151303.12353-1-laoar.shao@gmail.com
Cc: stable@vger.kernel.org
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Kajetan Puchalski <kajetan.puchalski@arm.com>
CC: Qais Yousef <qyousef@layalina.io>
Fixes: 3087c61ed2 ("tools/testing/selftests/bpf: replace open-coded 16 with TASK_COMM_LEN")
Reported-by: John Stultz <jstultz@google.com>
Debugged-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9965bbebae ]
Currently, each core device has VF pages counter which stores number of
fw pages used by its VFs and SFs.
The current design led to a hang when performing firmware reset on DPU,
where the DPU PFs stalled in sriov unload flow due to waiting on release
of SFs pages instead of waiting on only VFs pages.
Thus, Add a separate counter for SF firmware pages, which will prevent
the stall scenario described above.
Fixes: 1958fc2f07 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3bdbaea65 ]
Currently, an independent page counter is used for tracking memory usage
for each function type such as VF, PF and host PF (DPU).
For better code-readibilty, use a single array that stores
the number of allocated memory pages for each function type.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Stable-dep-of: 9965bbebae ("net/mlx5: Expose SF firmware pages counter")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f20660f05 ]
An interrupted dma_fence_wait() becomes an -ERESTARTSYS returned
to userspace ioctl(DRM_IOCTL_VIRTGPU_EXECBUFFER) calls, prompting to
retry the ioctl(), but the passed exbuf->fence_fd has been reset to -1,
making the retry attempt fail at sync_file_get_fence().
The uapi for DRM_IOCTL_VIRTGPU_EXECBUFFER is changed to retain the
passed value for exbuf->fence_fd when returning anything besides a
successful result from the ioctl.
Fixes: 2cd7b6f08b ("drm/virtio: add in/out fence support for explicit synchronization")
Signed-off-by: Ryan Neph <ryanneph@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230203233345.2477767-1-ryanneph@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03702d4d29 ]
Since commit 58e0be1ef6 ("net: use struct_group to copy ip/ipv6
header addresses"), ip and ipv6 headers started to use the __struct_group
definition, which is defined at include/uapi/linux/stddef.h. However,
linux/stddef.h isn't explicitly included in include/uapi/linux/{ip,ipv6}.h,
which breaks build of xskxceiver bpf selftest if you install the uapi
headers in the system:
$ make V=1 xskxceiver -C tools/testing/selftests/bpf
...
make: Entering directory '(...)/tools/testing/selftests/bpf'
gcc -g -O0 -rdynamic -Wall -Werror (...)
In file included from xskxceiver.c:79:
/usr/include/linux/ip.h:103:9: error: expected specifier-qualifier-list before ‘__struct_group’
103 | __struct_group(/* no tag */, addrs, /* no attrs */,
| ^~~~~~~~~~~~~~
...
Include the missing <linux/stddef.h> dependency in ip.h and do the
same for the ipv6.h header.
Fixes: 58e0be1ef6 ("net: use struct_group to copy ip/ipv6 header addresses")
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 88d7b12068 upstream.
We already round down the address in kunmap_local_indexed() which is the
other implementation of __kunmap_local(). The only implementation of
kunmap_flush_on_unmap() is PA-RISC which is expecting a page-aligned
address. This may be causing PA-RISC to be flushing the wrong addresses
currently.
Link: https://lkml.kernel.org/r/20230126200727.1680362-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Fixes: 298fa1ad55 ("highmem: Provide generic variant of kmap_atomic*")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac86f547ca upstream.
As commit 18365225f0 ("hwpoison, memcg: forcibly uncharge LRU pages"),
hwpoison will forcibly uncharg a LRU hwpoisoned page, the folio_memcg
could be NULl, then, mem_cgroup_track_foreign_dirty_slowpath() could
occurs a NULL pointer dereference, let's do not record the foreign
writebacks for folio memcg is null in mem_cgroup_track_foreign_dirty() to
fix it.
Link: https://lkml.kernel.org/r/20230129040945.180629-1-wangkefeng.wang@huawei.com
Fixes: 97b27821b4 ("writeback, memcg: Implement foreign dirty flushing")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reported-by: Ma Wupeng <mawupeng1@huawei.com>
Tested-by: Miko Larsson <mikoxyzzz@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Ma Wupeng <mawupeng1@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3489dbb696 upstream.
Patch series "Fixes for hugetlb mapcount at most 1 for shared PMDs".
This issue of mapcount in hugetlb pages referenced by shared PMDs was
discussed in [1]. The following two patches address user visible behavior
caused by this issue.
[1] https://lore.kernel.org/linux-mm/Y9BF+OCdWnCSilEu@monkey/
This patch (of 2):
A hugetlb page will have a mapcount of 1 if mapped by multiple processes
via a shared PMD. This is because only the first process increases the
map count, and subsequent processes just add the shared PMD page to their
page table.
page_mapcount is being used to decide if a hugetlb page is shared or
private in /proc/PID/smaps. Pages referenced via a shared PMD were
incorrectly being counted as private.
To fix, check for a shared PMD if mapcount is 1. If a shared PMD is found
count the hugetlb page as shared. A new helper to check for a shared PMD
is added.
[akpm@linux-foundation.org: simplification, per David]
[akpm@linux-foundation.org: hugetlb.h: include page_ref.h for page_count()]
Link: https://lkml.kernel.org/r/20230126222721.222195-2-mike.kravetz@oracle.com
Fixes: 25ee01a2fc ("mm: hugetlb: proc: add hugetlb-related fields to /proc/PID/smaps")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 101ca8d059 upstream.
The current implementation of rtc-efi is expecting all the 4
time services GET{SET}_TIME{WAKEUP} must be supported by UEFI
firmware. As per the EFI_RT_PROPERTIES_TABLE, the platform
specific implementations can choose to enable selective time
services based on the RTC device capabilities.
This patch does the following changes to provide GET/SET RTC
services on platforms that do not support the WAKEUP feature.
1) Relax time services cap check when creating a platform device.
2) Clear RTC_FEATURE_ALARM bit in the absence of WAKEUP services.
3) Conditional alarm entries in '/proc/driver/rtc'.
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Link: https://lore.kernel.org/r/20230102230630.192911-1-sdonthineni@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 254c71374a ]
Looks like kunit_test_init_section_suites(...) was messed up in a merge
conflict. This fixes it.
kunit_test_init_section_suites(...) was not updated to avoid the extra
level of indirection when .kunit_test_suites was flattened. Given no-one
was actively using it, this went unnoticed for a long period of time.
Fixes: e5857d396f ("kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites")
Signed-off-by: Brendan Higgins <brendan.higgins@linux.dev>
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Martin Fernandez <martin.fernandez@eclypsium.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de4eda9de2 ]
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stable-dep-of: 6dd88fd59d ("vhost-scsi: unbreak any layout for response")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddce1e0917 ]
A listening socket linked to a sockmap has its sk_prot overridden. It
points to one of the struct proto variants in tcp_bpf_prots. The variant
depends on the socket's family and which sockmap programs are attached.
A child socket cloned from a TCP listener initially inherits their sk_prot.
But before cloning is finished, we restore the child's proto to the
listener's original non-tcp_bpf_prots one. This happens in
tcp_create_openreq_child -> tcp_bpf_clone.
Today, in tcp_bpf_clone we detect if the child's proto should be restored
by checking only for the TCP_BPF_BASE proto variant. This is not
correct. The sk_prot of listening socket linked to a sockmap can point to
to any variant in tcp_bpf_prots.
If the listeners sk_prot happens to be not the TCP_BPF_BASE variant, then
the child socket unintentionally is left if the inherited sk_prot by
tcp_bpf_clone.
This leads to issues like infinite recursion on close [1], because the
child state is otherwise not set up for use with tcp_bpf_prot operations.
Adjust the check in tcp_bpf_clone to detect all of tcp_bpf_prots variants.
Note that it wouldn't be sufficient to check the socket state when
overriding the sk_prot in tcp_bpf_update_proto in order to always use the
TCP_BPF_BASE variant for listening sockets. Since commit
b8b8315e39 ("bpf, sockmap: Remove unhash handler for BPF sockmap usage")
it is possible for a socket to transition to TCP_LISTEN state while already
linked to a sockmap, e.g. connect() -> insert into map ->
connect(AF_UNSPEC) -> listen().
[1]: https://lore.kernel.org/all/00000000000073b14905ef2e7401@google.com/
Fixes: e80251555f ("tcp_bpf: Don't let child socket inherit parent protocol ops on copy")
Reported-by: syzbot+04c21ed96d861dccc5cd@syzkaller.appspotmail.com
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230113-sockmap-fix-v2-2-1e0ee7ac2f90@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a44b765148 upstream.
An SCTP endpoint can start an association through a path and tear it
down over another one. That means the initial path will not see the
shutdown sequence, and the conntrack entry will remain in ESTABLISHED
state for 5 days.
By merging the HEARTBEAT_ACKED and ESTABLISHED states into one
ESTABLISHED state, there remains no difference between a primary or
secondary path. The timeout for the merged ESTABLISHED state is set to
210 seconds (hb_interval * max_path_retrans + rto_max). So, even if a
path doesn't see the shutdown sequence, it will expire in a reasonable
amount of time.
With this change in place, there is now more than one state from which
we can transition to ESTABLISHED, COOKIE_ECHOED and HEARTBEAT_SENT, so
handle the setting of ASSURED bit whenever a state change has happened
and the new state is ESTABLISHED. Removed the check for dir==REPLY since
the transition to ESTABLISHED can happen only in the reply direction.
Fixes: 9fb9cbb108 ("[NETFILTER]: Add nf_conntrack subsystem.")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 899d3a3c19 ]
Currently there is no easy way for a drm driver to safely check and allow
drm_vma_offset_node for a drm file just once. Allow drm drivers to call
non-refcounted version of drm_vma_node_allow() so that a driver doesn't
need to keep track of each drm_vma_node_allow() to call subsequent
drm_vma_node_revoke() to prevent memory leak.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Suggested-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20230117175236.22317-1-nirmoy.das@intel.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ba81043753 upstream.
There is a lock inversion and rwsem read-lock recursion in the devfreq
target callback which can lead to deadlocks.
Specifically, ufshcd_devfreq_scale() already holds a clk_scaling_lock
read lock when toggling the write booster, which involves taking the
dev_cmd mutex before taking another clk_scaling_lock read lock.
This can lead to a deadlock if another thread:
1) tries to acquire the dev_cmd and clk_scaling locks in the correct
order, or
2) takes a clk_scaling write lock before the attempt to take the
clk_scaling read lock a second time.
Fix this by dropping the clk_scaling_lock before toggling the write booster
as was done before commit 0e9d4ca43b ("scsi: ufs: Protect some contexts
from unexpected clock scaling").
While the devfreq callbacks are already serialised, add a second
serialising mutex to handle the unlikely case where a callback triggered
through the devfreq sysfs interface is racing with a request to disable
clock scaling through the UFS controller 'clkscale_enable' sysfs
attribute. This could otherwise lead to the write booster being left
disabled after having disabled clock scaling.
Also take the new mutex in ufshcd_clk_scaling_allow() to make sure that any
pending write booster update has completed on return.
Note that this currently only affects Qualcomm platforms since commit
87bd05016a ("scsi: ufs: core: Allow host driver to disable wb toggling
during clock scaling").
The lock inversion (i.e. 1 above) was reported by lockdep as:
======================================================
WARNING: possible circular locking dependency detected
6.1.0-next-20221216 #211 Not tainted
------------------------------------------------------
kworker/u16:2/71 is trying to acquire lock:
ffff076280ba98a0 (&hba->dev_cmd.lock){+.+.}-{3:3}, at: ufshcd_query_flag+0x50/0x1c0
but task is already holding lock:
ffff076280ba9cf0 (&hba->clk_scaling_lock){++++}-{3:3}, at: ufshcd_devfreq_scale+0x2b8/0x380
which lock already depends on the new lock.
[ +0.011606]
the existing dependency chain (in reverse order) is:
-> #1 (&hba->clk_scaling_lock){++++}-{3:3}:
lock_acquire+0x68/0x90
down_read+0x58/0x80
ufshcd_exec_dev_cmd+0x70/0x2c0
ufshcd_verify_dev_init+0x68/0x170
ufshcd_probe_hba+0x398/0x1180
ufshcd_async_scan+0x30/0x320
async_run_entry_fn+0x34/0x150
process_one_work+0x288/0x6c0
worker_thread+0x74/0x450
kthread+0x118/0x120
ret_from_fork+0x10/0x20
-> #0 (&hba->dev_cmd.lock){+.+.}-{3:3}:
__lock_acquire+0x12a0/0x2240
lock_acquire.part.0+0xcc/0x220
lock_acquire+0x68/0x90
__mutex_lock+0x98/0x430
mutex_lock_nested+0x2c/0x40
ufshcd_query_flag+0x50/0x1c0
ufshcd_query_flag_retry+0x64/0x100
ufshcd_wb_toggle+0x5c/0x120
ufshcd_devfreq_scale+0x2c4/0x380
ufshcd_devfreq_target+0xf4/0x230
devfreq_set_target+0x84/0x2f0
devfreq_update_target+0xc4/0xf0
devfreq_monitor+0x38/0x1f0
process_one_work+0x288/0x6c0
worker_thread+0x74/0x450
kthread+0x118/0x120
ret_from_fork+0x10/0x20
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&hba->clk_scaling_lock);
lock(&hba->dev_cmd.lock);
lock(&hba->clk_scaling_lock);
lock(&hba->dev_cmd.lock);
*** DEADLOCK ***
Fixes: 0e9d4ca43b ("scsi: ufs: Protect some contexts from unexpected clock scaling")
Cc: stable@vger.kernel.org # 5.12
Cc: Can Guo <quic_cang@quicinc.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230116161201.16923-1-johan+linaro@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4444bc2116 upstream.
When a running wake_tx_queue() call is aborted due to a hw queue stop
the corresponding iTXQ is not always correctly marked for resumption:
wake_tx_push_queue() can stops the queue run without setting
@IEEE80211_TXQ_STOP_NETIF_TX.
Without the @IEEE80211_TXQ_STOP_NETIF_TX flag __ieee80211_wake_txqs()
will not schedule a new queue run and remaining frames in the queue get
stuck till another frame is queued to it.
Fix the issue for all drivers - also the ones with custom wake_tx_queue
callbacks - by moving the logic into ieee80211_tx_dequeue() and drop the
redundant @txqs_stopped.
@IEEE80211_TXQ_STOP_NETIF_TX is also renamed to @IEEE80211_TXQ_DIRTY to
better describe the flag.
Fixes: c850e31f79 ("wifi: mac80211: add internal handler for wake_tx_queue")
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20221230121850.218810-1-alexander@wetzel-home.de
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
