mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
3,918 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
01ef02ab96 |
RISC-V: Mark riscv_v_init() as __init
[ Upstream commit |
||
|
|
7f5a0124dc |
riscv: kprobes: Fix incorrect address calculation
commit |
||
|
|
76ab0afcdb |
riscv: Fix sleeping in invalid context in die()
commit |
||
|
|
6191b1a474 |
drivers/perf: riscv: Fix Platform firmware event data
[ Upstream commit |
||
|
|
53a5681775 |
riscv: use local label names instead of global ones in assembly
[ Upstream commit |
||
|
|
607b8740c6 |
riscv: stacktrace: fix backtracing through exceptions
[ Upstream commit |
||
|
|
d2bd51954a |
riscv: mm: Fix the out of bound issue of vmemmap address
[ Upstream commit |
||
|
|
3825569af3 |
riscv: module: remove relocation_head rel_entry member allocation
[ Upstream commit |
||
|
|
5d4380ec05 |
RISC-V: KVM: Fix csr_write -> csr_set for HVIEN PMU overflow bit
[ Upstream commit |
||
|
|
3abfc4130c |
riscv: Fix IPIs usage in kfence_protect_page()
commit |
||
|
|
7174f13ea2 |
riscv: Fix wrong usage of __pa() on a fixmap address
commit |
||
|
|
344945806f |
riscv: mm: Do not call pmd dtor on vmemmap page table teardown
commit |
||
|
|
7b7a9175c6 |
timekeeping: Remove CONFIG_DEBUG_TIMEKEEPING
commit |
||
|
|
c4ae2baea5 |
RISC-V: Check scalar unaligned access on all CPUs
commit |
||
|
|
2bb3830152 |
RISC-V: Scalar unaligned access emulated on hotplug CPUs
commit |
||
|
|
b1af648f0d |
riscv: kvm: Fix out-of-bounds array access
[ Upstream commit |
||
|
|
63b7418a3a |
RISC-V: KVM: Fix APLIC in_clrip and clripnum write emulation
[ Upstream commit |
||
|
|
b5f599af75 |
of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
[ Upstream commit |
||
|
|
4a5df37964 |
10 hotfixes, 7 of which are cc:stable. All singletons, please see the
changelogs for details. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZzkr6AAKCRDdBJ7gKXxA jsb2AP9HCOI4w9rQTmBdnaefXytS7fiiPq+LVNpjJ0NGXX2FSgD/e1NM0wi8KevQ npcvlqTcXtRSJvYNF904aTNyDn+Kuw0= =KFGY -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2024-11-16-15-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "10 hotfixes, 7 of which are cc:stable. All singletons, please see the changelogs for details" * tag 'mm-hotfixes-stable-2024-11-16-15-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm: revert "mm: shmem: fix data-race in shmem_getattr()" ocfs2: uncache inode which has failed entering the group mm: fix NULL pointer dereference in alloc_pages_bulk_noprof mm, doc: update read_ahead_kb for MADV_HUGEPAGE fs/proc/task_mmu: prevent integer overflow in pagemap_scan_get_args() sched/task_stack: fix object_is_on_stack() for KASAN tagged pointers crash, powerpc: default to CRASH_DUMP=n on PPC_BOOK3S_32 mm/mremap: fix address wraparound in move_page_tables() tools/mm: fix compile error mm, swap: fix allocation and scanning race with swapoff |
||
|
|
31daa34315 |
crash, powerpc: default to CRASH_DUMP=n on PPC_BOOK3S_32
Fixes boot failures on 6.9 on PPC_BOOK3S_32 machines using Open Firmware.
On these machines, the kernel refuses to boot from non-zero
PHYSICAL_START, which occurs when CRASH_DUMP is on.
Since most PPC_BOOK3S_32 machines boot via Open Firmware, it should
default to off for them. Users booting via some other mechanism can still
turn it on explicitly.
Does not change the default on any other architectures for the
time being.
Link: https://lkml.kernel.org/r/20240917163720.1644584-1-dave@vasilevsky.ca
Fixes:
|
||
|
|
2e1b3cc9d7 |
soc: fixes for 6.12, part 2
Where the last set of fixes was mostly drivers, this time the devicetree changes all come at once, targeting mostly the Rockchips, Qualcomm and NXP platforms. The Qualcomm bugfixes target the Snapdragon X Elite laptops, specifically problems with PCIe and NVMe support to improve reliability, and a boot regresion on msm8939. Also for Snapdragon platforms, there are a number of correctness changes in the several platform specific device drivers, but none of these are as impactful. On the NXP i.MX platform, the fixes are all for 64-bit i.MX8 variants, correcting individual entries in the devicetree that were incorrect and causing the media, video, mmc and spi drivers to misbehave in minor ways. The Arm SCMI firmware driver gets fixes for a use-after-free bug and for correctly parsing firmware information. On the RISC-V side, there are three minor devicetree fixes for starfive and sophgo, again addressing only minor mistakes. One device driver patch fixes a problem with spurious interrupt handling. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmcpR7oACgkQYKtH/8kJ Uic9dA/+NzeNald+ap++pYYmIx9FcV3q3aieN4j5NRgAwUS84bNXpARkDQAK8lx8 GFzH7VUe0YwKlh+70P73eaLqsRyYE37eUyvabwnxgO0QnI798MZfM5diDvAFm0LK kQKnNLx0qojt6HQTN3PVfOn+rcp2J5dgUV+ZAG9TEM3YKA0MY/bABRqaZtIZzSxg WwM+jqFh5+EugiioSlL6HCdAVk12wwEJkAInEEY1y/KaeQS9K8vzEOwk4FDeIf2a 3V+G7IVIBI4rbvrAs2ukW3OrRiGT+svINS5k7qkap13YZUUjENnJYGYNm6woTTyb INpBowLKr1gJ1Aluk8AELvpa+aX1BY9rkxP+vTG0HrZVdrPcPToFUBQA4qZgpu/i k0uWb20uN1b2Uor2XP2hcTxvzfKPlvnYHxLTMG89PxoVrMX+oEQoCrAP24YcSkPd srV0aU54MUHANXEnNco0txdElK+8L7ZCyB19KpVnqqshohDpQ+zkX15Hw9uQLwEc RbF99SrR9KFg3sY62Q7LgJOhQ3x6LjGhqPCjejIZ9DvEzndArKYnkkiJYdxxhqkB WN1LB/PmnKPAAh1lJdej6SPhiwCCpEFG3IyS/H1/lv7CR94LVode1J4dYTJmcZaq aownmb4W1zECgMGQS6YjhuAG1h7D0QtSmWBAuiC+H+T2QTRPtKI= =9YYG -----END PGP SIGNATURE----- Merge tag 'arm-fixes-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC fixes from Arnd Bergmann: "Where the last set of fixes was mostly drivers, this time the devicetree changes all come at once, targeting mostly the Rockchips, Qualcomm and NXP platforms. The Qualcomm bugfixes target the Snapdragon X Elite laptops, specifically problems with PCIe and NVMe support to improve reliability, and a boot regresion on msm8939. Also for Snapdragon platforms, there are a number of correctness changes in the several platform specific device drivers, but none of these are as impactful. On the NXP i.MX platform, the fixes are all for 64-bit i.MX8 variants, correcting individual entries in the devicetree that were incorrect and causing the media, video, mmc and spi drivers to misbehave in minor ways. The Arm SCMI firmware driver gets fixes for a use-after-free bug and for correctly parsing firmware information. On the RISC-V side, there are three minor devicetree fixes for starfive and sophgo, again addressing only minor mistakes. One device driver patch fixes a problem with spurious interrupt handling" * tag 'arm-fixes-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (63 commits) firmware: arm_scmi: Use vendor string in max-rx-timeout-ms dt-bindings: firmware: arm,scmi: Add missing vendor string riscv: dts: Replace deprecated snps,nr-gpios property for snps,dw-apb-gpio-port devices arm64: dts: rockchip: Correct GPIO polarity on brcm BT nodes arm64: dts: rockchip: Drop invalid clock-names from es8388 codec nodes ARM: dts: rockchip: Fix the realtek audio codec on rk3036-kylin ARM: dts: rockchip: Fix the spi controller on rk3036 ARM: dts: rockchip: drop grf reference from rk3036 hdmi ARM: dts: rockchip: fix rk3036 acodec node arm64: dts: rockchip: remove orphaned pinctrl-names from pinephone pro soc: qcom: pmic_glink: Handle GLINK intent allocation rejections rpmsg: glink: Handle rejected intent request better arm64: dts: qcom: x1e80100: fix PCIe5 interconnect arm64: dts: qcom: x1e80100: fix PCIe4 interconnect arm64: dts: qcom: x1e80100: Fix up BAR spaces MAINTAINERS: invert Misc RISC-V SoC Support's pattern soc: qcom: socinfo: fix revision check in qcom_socinfo_probe() arm64: dts: qcom: x1e80100-qcp: fix nvme regulator boot glitch arm64: dts: qcom: x1e80100-microsoft-romulus: fix nvme regulator boot glitch arm64: dts: qcom: x1e80100-yoga-slim7x: fix nvme regulator boot glitch ... |
||
|
|
a031e15404 |
RISC-V Fixes for 6.11-rc6
* A fix that avoids accessing the early boot ACPI tables via unsafe memory attributes, which can result in incorrect ACPI table data appearing. This can cause all sorts of bad behavior. * A fix to avoid compiler-insert library calls in the VDSO. * GCC+Rust builds have been disabled, to avoid issues related to ISA string mismatched between the GCC and LLVM Rust implementations. * The NX flag is now set in the EFI PE/COFF headers, which is necessary for some distro GRUB versions to boot images. * A fix to avoid leaking DT node reference counts on ACPI systems during cache info parsing. * CPU numbers are now printed as unsigned values during hotplug. * A pair of build fixes for usused macros, which can trigger warnings on some configurations. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmck63wTHHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiZiID/4kBXBpJ3vAt3xmu7tlt/Y29EICJeMs aVZTHtH89K3VhN9M3F6a+loJquKyg7mhDoz5diEiJ5yzRPlrXzqhPePlilQD+Akz P33B/2jHNv7xs/wZ6e0GOSF0J5baIWBnL2rJ43daGXfj+Qw4RvQEN2yt2+GxqJq7 vXeLQRC4RLfRjKPMMC3sT4ihNsDzFuOUYQG9kAHo6sJy8+N6NqXx3IOEh8z6qZmF 8RpWCrxxIwZJKWm0d47NrHPn/ztXdHcrKbANND3/5uye7WNEt++o5Kc6nCuxp5mo R1M+OoonTBMLXzeqZ9SSDpTywHYlrXmzl3IAyrbO2XYm+4sERN7AV1FwS9AzgiF4 b1pe5LnwWRzZstcnmgSQylU31gSTeswGi25jd+zMJIdZLreEUim3eIE2Hp3sh1ys YGtkDqW3VLGnJKGlvmfM2m4iFhYNTMj2GEuIymFyECa4Kv3qiMPsbPmZLHKvTYaq 3II4oCx4wdYHiBbV3FvCdp6QkJjr6VdqC2dIYuNE/06mNhN+1ccZ60z/llL39wda EWFEK5R5RES2DHmGEz0mhMRcqBilEWhdi4+S1Wi/E06dtGBJpcsTkLXfzCWbYGxw 4l2K91jDMV/EiuG57dX2CfuavgThhGyOeLxgId+17n28CYPNExy8BKprZjDI0p2L 4mzwbcP/KcO3XA== =sqa0 -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - Avoid accessing the early boot ACPI tables via unsafe memory attributes, which can result in incorrect ACPI table data appearing. This can cause all sorts of bad behavior. - Avoid compiler-inserted library calls in the VDSO. - GCC+Rust builds have been disabled, to avoid issues related to ISA string mismatched between the GCC and LLVM Rust implementations. - The NX flag is now set in the EFI PE/COFF headers, which is necessary for some distro GRUB versions to boot images. - A fix to avoid leaking DT node reference counts on ACPI systems during cache info parsing. - CPU numbers are now printed as unsigned values during hotplug. - A pair of build fixes for usused macros, which can trigger warnings on some configurations. * tag 'riscv-for-linus-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Remove duplicated GET_RM riscv: Remove unused GENERATING_ASM_OFFSETS riscv: Use '%u' to format the output of 'cpu' riscv: Prevent a bad reference count on CPU nodes riscv: efi: Set NX compat flag in PE/COFF header RISC-V: disallow gcc + rust builds riscv: Do not use fortify in early code RISC-V: ACPI: fix early_ioremap to early_memremap riscv: vdso: Prevent the compiler from inserting calls to memset() |
||
|
|
e5c06efdc0 |
RISC-V soc fixes for v6.12-rc6
StarFive: Two minor dts fixes, one setting the correct eth phy delay parameters and one disabling unused nodes that caused warnings at probe time. Firmware: Fix the poll_complete() implementation in the auto-update driver so that it behaves as the framework expects. Misc: Update the maintainer pattern for my dts entry, so that it covers the specific platforms listed , rather than including all riscv platforms with the list platforms excluded. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZyN2FAAKCRB4tDGHoIJi 0khPAQDfBrVD0CD25qS+GCQT1+OOodRlmZ8pUcLy5SiN/he9AAD/bpR4Y7esU+Ne LTnsqL3OPXtVkA247UtKkw03K1ctKgI= =LvhU -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmck6gcACgkQYKtH/8kJ Uif9CRAAvtFa5tNJkpmSaIQlcC6rzi9oIyXCOuCaXAgWgFP+KiGTWgXp4l1eD52R VkUGj+kBuZbozx2RPZCnH0W4aglkSPUzNtjFGOKvudTRrGGkDfJpGS+r3hIHb5B7 wOxZ/RpniQBtlhxxKEYIoC22Rv71p6qXfXBny/Add6Uy+TRh7w/+SvBOfXqWQEmn 3afc+uwYagxbA6ffe9odT6DtKXE97PynbhaDN7bfkXSDE/HyBvIytxrCEXTH+KAU 8bb8bwu2puLNpDGFJo+gC6p0cMAq/8FTamibNJ68sr22DDn7Jq7ugub7sumlUHMv cS7+1Lo8ubpNPZzs9pXR+SknRkLpwXuTYDfyHJJh0BJxbLYTuU5HphGvFpu4/j3E jF5GP7S4VvVbOqGk0dSidegrf3wF8FMxk0migA2kx5DY7gwc3FIL6VTeiQEZFE36 37cjs2lt9L7OyB+gPoSZjcoqNaSvd+ommWlXCcLRRSBMyPfMJ49nv7WRhdpkXNtA PrrT9ESQ+/vIjjsB1qfVH6SFMZCFwBHNN3jnsg0OawGxIvS+ko8PmNli5eTULWp+ Jp9Ds/aMjQAzH50Ez2YQi6ysV3otjA8P2YQ1uN+DDdNe+oz+00kSw7N1whGo74lk b/EpoeeDUvTsOu2ibJne+SOzGZ5VLW0M5df4hfzdDo/oVx131As= =SLzW -----END PGP SIGNATURE----- Merge tag 'riscv-soc-fixes-for-v6.12-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into HEAD RISC-V soc fixes for v6.12-rc6 StarFive: Two minor dts fixes, one setting the correct eth phy delay parameters and one disabling unused nodes that caused warnings at probe time. Firmware: Fix the poll_complete() implementation in the auto-update driver so that it behaves as the framework expects. Misc: Update the maintainer pattern for my dts entry, so that it covers the specific platforms listed , rather than including all riscv platforms with the list platforms excluded. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-soc-fixes-for-v6.12-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: MAINTAINERS: invert Misc RISC-V SoC Support's pattern riscv: dts: starfive: Update ethernet phy0 delay parameter values for Star64 riscv: dts: starfive: disable unused csi/camss nodes firmware: microchip: auto-update: fix poll_complete() to not report spurious timeout errors Link: https://lore.kernel.org/r/20241031-colossal-cassette-617817c9bec3@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
e29c29343a |
RISC-V Sophgo Devicetree fixes for v6.12-rc1
Just one minor fix to replace deprecated "snps,nr-gpios" property with "ngpios" for snps,dw-apb-gpio-port devices. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> -----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEEdoBX2jyDC9ZCTwZjDCzASqG0i0IFAmccQwUACgkQDCzASqG0 i0JA4QwAvqUfrrs8+Kc60GQq5vDU8uLcg8OmS6uR0fWOEC7pKMpIzbKGl9LaayG2 iGIU+gKMfxxRJfKBVOSYVC2AVqPH94PlcY7YkOuGryqSLSk7f/wrk9QoaAOCefOw 8fKZWfrxIa3loAoxGHqpRKdCdN0Kjnc1e7OYs6nomhg6nutCs16joSiIoQ363KJ+ 4vci/pTXaMYNj0FCNgYHx2iRmHwswLOLQxIdzecp1nOtcOqzZTkpx/O10m+qUr76 TlhaqUiiZr7vGRFsoAqcipKf5O8NgFCu8/TstCCvgUt4cGnSXNsHxO8LAFhTAbGT R04MbG4NFb0Krl/oDXa7ZpKYd6HnQAYD3yGJ+th5M4zcljRdny44qFazHdD0Zq9S T7RkgV+qwIB+7o6CrgFCYNHx/eBf8QtWc7hoNeeiVnx99+abZl4yvifQXKkhaip9 gVuivCB++j1BKsGLCV6/scTB26bJmkQDLV4sAReUPytyCF7LWYonr/nVF0/R0pji Vg+O6qQ7 =Qnbx -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmck2+sACgkQYKtH/8kJ UifclA/+KuqcP/sgSxuWDZjYWr68BtaI/w4Ia6ixrn0LHzPtKD30x267R2zz9dz1 N9o0/XGssFqc6fnwRJCrBl5GurbpZlesPCkOaDlXRBvBfg5x1ootmA/Xnirp8A8U FqCh1y2eAFCfnvoXBNzatRorLIgSW7ByAk7zBth8e9J+FMEi7UFdpe5OAQ+xzKBS vRl722OOrxwA+4J9152V1A587479vyRRIlDZSfxhbEhBQLwvcWpWIdEKsiNmrmh5 l0zbzxXap5SJ+TkB5zuFqsNrYmpxeXwTPJ3ulWGpBf36pBUFdE6ZZQLAB7wGqHrt eLSfGd+tDK6an8Stm8KYEHdSLumLk2oLCa8DmQ2fly+cXHsxkL4E5iuiO52YUzJO qo3zFqFZ5XBQ9kA8oiXMp8MoIQrS62C8lq81axX3PxiKIZNztEtR3Jjd76mlGTZk Bm5JHL2t/IiQUvGXEMgI4drJL900jNvJkV2iOj6rjFpzrfB8ZpYfJtR4pKwh5PXt iqDLHJYiPgx3DA658te4ZZq2BAPXM1JPC2lgGKpoxeZ8nDm9s0QqqZ8m7zCUquKj tVwSBI/ggsLR6uoJn8Fwul1Qn8UPRUWFioYt79K52ei2VyV010pOpH6gE5pPoDgJ NGmdDknFE+m7xmoa/1Viko6T6v1jNZkNFqXpCVovrTTE38Aey/M= =3jHD -----END PGP SIGNATURE----- Merge tag 'riscv-sophgo-dt-fixes-for-v6.12-rc1' of https://github.com/sophgo/linux into HEAD RISC-V Sophgo Devicetree fixes for v6.12-rc1 Just one minor fix to replace deprecated "snps,nr-gpios" property with "ngpios" for snps,dw-apb-gpio-port devices. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * tag 'riscv-sophgo-dt-fixes-for-v6.12-rc1' of https://github.com/sophgo/linux: riscv: dts: Replace deprecated snps,nr-gpios property for snps,dw-apb-gpio-port devices Link: https://lore.kernel.org/r/MA0P287MB2822A17623C51A558DB948FCFE482@MA0P287MB2822.INDP287.PROD.OUTLOOK.COM Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
5f153a692b |
Merge commit 'bf40167d54' into fixes
This fix is part of a series on for-next, but it fixes broken builds so
I'm picking it up as a fix.
* commit '
|
||
|
|
164f66de6b |
riscv: Remove duplicated GET_RM
The macro GET_RM defined twice in this file, one can be removed.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Fixes:
|
||
|
|
46d4e5ac6f |
riscv: Remove unused GENERATING_ASM_OFFSETS
The macro is not used in the current version of kernel, it looks like
can be removed to avoid a build warning:
../arch/riscv/kernel/asm-offsets.c: At top level:
../arch/riscv/kernel/asm-offsets.c:7: warning: macro "GENERATING_ASM_OFFSETS" is not used [-Wunused-macros]
7 | #define GENERATING_ASM_OFFSETS
Fixes:
|
||
|
|
e0872ab726 |
riscv: Use '%u' to format the output of 'cpu'
'cpu' is an unsigned integer, so its conversion specifier should
be %u, not %d.
Suggested-by: Wentao Guan <guanwentao@uniontech.com>
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/all/alpine.DEB.2.21.2409122309090.40372@angie.orcam.me.uk/
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Fixes:
|
||
|
|
37233169a6 |
riscv: Prevent a bad reference count on CPU nodes
When populating cache leaves we previously fetched the CPU device node
at the very beginning. But when ACPI is enabled we go through a
specific branch which returns early and does not call 'of_node_put' for
the node that was acquired.
Since we are not using a CPU device node for the ACPI code anyways, we
can simply move the initialization of it just passed the ACPI block, and
we are guaranteed to have an 'of_node_put' call for the acquired node.
This prevents a bad reference count of the CPU device node.
Moreover, the previous function did not check for errors when acquiring
the device node, so a return -ENOENT has been added for that case.
Signed-off-by: Miquel Sabaté Solà <mikisabate@gmail.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Fixes:
|
||
|
|
d41373a4b9 |
riscv: efi: Set NX compat flag in PE/COFF header
The IMAGE_DLLCHARACTERISTICS_NX_COMPAT informs the firmware that the
EFI binary does not rely on pages that are both executable and
writable.
The flag is used by some distro versions of GRUB to decide if the EFI
binary may be executed.
As the Linux kernel neither has RWX sections nor needs RWX pages for
relocation we should set the flag.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Fixes:
|
||
|
|
33549fcf37 |
RISC-V: disallow gcc + rust builds
During the discussion before supporting rust on riscv, it was decided
not to support gcc yet, due to differences in extension handling
compared to llvm (only the version of libclang matching the c compiler
is supported). Recently Jason Montleon reported [1] that building with
gcc caused build issues, due to unsupported arguments being passed to
libclang. After some discussion between myself and Miguel, it is better
to disable gcc + rust builds to match the original intent, and
subsequently support it when an appropriate set of extensions can be
deduced from the version of libclang.
Closes: https://lore.kernel.org/all/20240917000848.720765-2-jmontleo@redhat.com/ [1]
Link: https://lore.kernel.org/all/20240926-battering-revolt-6c6a7827413e@spud/ [2]
Fixes:
|
||
|
|
afedc3126e |
riscv: Do not use fortify in early code
Early code designates the code executed when the MMU is not yet enabled, and this comes with some limitations (see Documentation/arch/riscv/boot.rst, section "Pre-MMU execution"). FORTIFY_SOURCE must be disabled then since it can trigger kernel panics as reported in [1]. Reported-by: Jason Montleon <jmontleo@redhat.com> Closes: https://lore.kernel.org/linux-riscv/CAJD_bPJes4QhmXY5f63GHV9B9HFkSCoaZjk-qCT2NGS7Q9HODg@mail.gmail.com/ [1] Fixes: |
||
|
|
1966db682f |
RISC-V: ACPI: fix early_ioremap to early_memremap
When SVPBMT is enabled, __acpi_map_table() will directly access the
data in DDR through the IO attribute, rather than through hardware
cache consistency, resulting in incorrect data in the obtained ACPI
table.
The log: ACPI: [ACPI:0x18] Invalid zero length.
We do not assume whether the bootloader flushes or not. We should
access in a cacheable way instead of maintaining cache consistency
by software.
Fixes:
|
||
|
|
d99913e1b8 |
riscv: dts: Replace deprecated snps,nr-gpios property for snps,dw-apb-gpio-port devices
snps,dw-apb-gpio-port is deprecated since commit |
||
|
|
bf40167d54 |
riscv: vdso: Prevent the compiler from inserting calls to memset()
The compiler is smart enough to insert a call to memset() in
riscv_vdso_get_cpus(), which generates a dynamic relocation.
So prevent this by using -fno-builtin option.
Fixes:
|
||
|
|
825bb69228 |
riscv: dts: starfive: Update ethernet phy0 delay parameter values for Star64
Improve function of Star64 bottom network port phy0 with updated delay values.
Initial upstream patches supporting Star64 use the same vendor board support
package parameters known to result in an unreliable bottom network port.
Success acquiring DHCP lease and no dropped packets to ping LAN address:
rx 900: tx 1500 1650 1800 1950
rx 750: tx 1650 1800 1950
rx 600: tx 1800 1950
rx 1050: tx 1650 1800 1950
rx 1200: tx 1500 1650 1800 1950
rx 1350: tx 1500 1650 1800 1950
rx 1500: tx 1500 1650 1800 1950
rx 1650: tx 1500 1650 1800 1950
rx 1800: tx 1500 1650 1800 1950
rx 1900: tx 1950
rx 1950: tx 1950
Failure acquiring DHCP lease or many dropped packets:
rx 450: tx 1500 1800 1950
rx 600: tx 1200 1350 1650
rx 750: tx 1350 1500
rx 900: tx 1200 1350
rx 1050: tx 1050 1200 1350 1500
rx 1200: tx 1350
rx 1350: tx 1350
rx 1500: tx 1200 1350
rx 1650: tx 1050 1200 1350
rx 1800: tx 1050 1200 1350
rx 1900: tx 1500 1650 1800
rx 1950: tx 1200 1350
Non-functional:
rx 0: tx 0 150 300 450 600 750 900 1050 1200 1350 1500 1650 1800 1950
rx 150: tx 0 150 300 450 600 750 900 1050 1200 1350 1500 1650 1800 1950
rx 300: tx 0 150 300 450 600 750 900 1050 1200 1350 1500 1650 1800 1950
rx 450: tx 0 150 300 450 600 750 900 1050 1200 1350 1650
rx 600: tx 0 150 300 450 600 750 900 1050
rx 750: tx 0 150 300 450 600 750 900 1050 1200
rx 900: tx 0 150 300 450 600 750 900 1050
rx 1050: tx 0 150 300 450 600 750 900
rx 1200: tx 0 150 300 450 600 750 900 1050 1200
rx 1350: tx 0 150 300 450 600 750 900 1050 1200
rx 1500: tx 0 150 300 450 600 750 900 1050
rx 1650: tx 0 150 300 450 600 750 900
rx 1800: tx 0 150 300 450 600 750 900
rx 1900: tx 0 150 300 450 600 750 900 1050 1200 1350
rx 1950: tx 0 150 300 450 600 750 900 1050
Selecting the median of all working rx delay values 1500 combined with tx delay
values 1500, 1650, 1800, and 1950 only the tx delay value of 1950 (default) is
reliable as tested in both Linux 6.11.2 and U-Boot v2024.10
Signed-off-by: E Shattow <e@freeshell.de>
CC: stable@vger.kernel.org
Fixes:
|
||
|
|
d129377639 |
ARM64:
* Fix the guest view of the ID registers, making the relevant fields
writable from userspace (affecting ID_AA64DFR0_EL1 and ID_AA64PFR1_EL1)
* Correcly expose S1PIE to guests, fixing a regression introduced
in 6.12-rc1 with the S1POE support
* Fix the recycling of stage-2 shadow MMUs by tracking the context
(are we allowed to block or not) as well as the recycling state
* Address a couple of issues with the vgic when userspace misconfigures
the emulation, resulting in various splats. Headaches courtesy
of our Syzkaller friends
* Stop wasting space in the HYP idmap, as we are dangerously close
to the 4kB limit, and this has already exploded in -next
* Fix another race in vgic_init()
* Fix a UBSAN error when faking the cache topology with MTE
enabled
RISCV:
* RISCV: KVM: use raw_spinlock for critical section in imsic
x86:
* A bandaid for lack of XCR0 setup in selftests, which causes trouble
if the compiler is configured to have x86-64-v3 (with AVX) as the
default ISA. Proper XCR0 setup will come in the next merge window.
* Fix an issue where KVM would not ignore low bits of the nested CR3
and potentially leak up to 31 bytes out of the guest memory's bounds
* Fix case in which an out-of-date cached value for the segments could
by returned by KVM_GET_SREGS.
* More cleanups for KVM_X86_QUIRK_SLOT_ZAP_ALL
* Override MTRR state for KVM confidential guests, making it WB by
default as is already the case for Hyper-V guests.
Generic:
* Remove a couple of unused functions
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcVK54UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOfrgf7BRyihd28OGaqVuv2BqGYrxqfOkd6
ZqpJDOy+X7UE3iG5NhTxw4mghCJFhOwIL7gDSZwPLe6D2k01oqPSP2pLMqXb5oOv
/EkltRvzG0YIH3sjZY5PROrMMxnvSKkJKxETFxFQQzMKRym2v/T5LAzrium58YIT
vWZXxo2HTPXOw/U5upAqqMYJMeeJEL3kurVHtOsPytUFjrIOl0BfeKvgjOwonDIh
Awm4JZwk0+1d8sYfkuzsSrTQmtshDCx1jkFN1juirt90s1EwgmOvVKiHo3gMsVP9
veDRoLTx2fM/r7TrhoHo46DTA2vbfmCltWcT0cn5x8P24BFGXXe/IDJIHA==
=IVlI
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix the guest view of the ID registers, making the relevant fields
writable from userspace (affecting ID_AA64DFR0_EL1 and
ID_AA64PFR1_EL1)
- Correcly expose S1PIE to guests, fixing a regression introduced in
6.12-rc1 with the S1POE support
- Fix the recycling of stage-2 shadow MMUs by tracking the context
(are we allowed to block or not) as well as the recycling state
- Address a couple of issues with the vgic when userspace
misconfigures the emulation, resulting in various splats. Headaches
courtesy of our Syzkaller friends
- Stop wasting space in the HYP idmap, as we are dangerously close to
the 4kB limit, and this has already exploded in -next
- Fix another race in vgic_init()
- Fix a UBSAN error when faking the cache topology with MTE enabled
RISCV:
- RISCV: KVM: use raw_spinlock for critical section in imsic
x86:
- A bandaid for lack of XCR0 setup in selftests, which causes trouble
if the compiler is configured to have x86-64-v3 (with AVX) as the
default ISA. Proper XCR0 setup will come in the next merge window.
- Fix an issue where KVM would not ignore low bits of the nested CR3
and potentially leak up to 31 bytes out of the guest memory's
bounds
- Fix case in which an out-of-date cached value for the segments
could by returned by KVM_GET_SREGS.
- More cleanups for KVM_X86_QUIRK_SLOT_ZAP_ALL
- Override MTRR state for KVM confidential guests, making it WB by
default as is already the case for Hyper-V guests.
Generic:
- Remove a couple of unused functions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (27 commits)
RISCV: KVM: use raw_spinlock for critical section in imsic
KVM: selftests: Fix out-of-bounds reads in CPUID test's array lookups
KVM: selftests: x86: Avoid using SSE/AVX instructions
KVM: nSVM: Ignore nCR3[4:0] when loading PDPTEs from memory
KVM: VMX: reset the segment cache after segment init in vmx_vcpu_reset()
KVM: x86: Clean up documentation for KVM_X86_QUIRK_SLOT_ZAP_ALL
KVM: x86/mmu: Add lockdep assert to enforce safe usage of kvm_unmap_gfn_range()
KVM: x86/mmu: Zap only SPs that shadow gPTEs when deleting memslot
x86/kvm: Override default caching mode for SEV-SNP and TDX
KVM: Remove unused kvm_vcpu_gfn_to_pfn_atomic
KVM: Remove unused kvm_vcpu_gfn_to_pfn
KVM: arm64: Ensure vgic_ready() is ordered against MMIO registration
KVM: arm64: vgic: Don't check for vgic_ready() when setting NR_IRQS
KVM: arm64: Fix shift-out-of-bounds bug
KVM: arm64: Shave a few bytes from the EL2 idmap code
KVM: arm64: Don't eagerly teardown the vgic on init error
KVM: arm64: Expose S1PIE to guests
KVM: arm64: nv: Clarify safety of allowing TLBI unmaps to reschedule
KVM: arm64: nv: Punt stage-2 recycling to a vCPU request
KVM: arm64: nv: Do not block when unmapping stage-2 if disallowed
...
|
||
|
|
3ec4350d4e |
RISCV: KVM: use raw_spinlock for critical section in imsic
For the external interrupt updating procedure in imsic, there was a spinlock to protect it already. But since it should not be preempted in any cases, we should turn to use raw_spinlock to prevent any preemption in case PREEMPT_RT was enabled. Signed-off-by: Cyan Yang <cyan.yang@sifive.com> Reviewed-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Message-ID: <20240919160126.44487-1-cyan.yang@sifive.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
|
3d5ad2d4ec |
BPF fixes:
- Fix BPF verifier to not affect subreg_def marks in its range propagation, from Eduard Zingerman. - Fix a truncation bug in the BPF verifier's handling of coerce_reg_to_size_sx, from Dimitar Kanaliev. - Fix the BPF verifier's delta propagation between linked registers under 32-bit addition, from Daniel Borkmann. - Fix a NULL pointer dereference in BPF devmap due to missing rxq information, from Florian Kauer. - Fix a memory leak in bpf_core_apply, from Jiri Olsa. - Fix an UBSAN-reported array-index-out-of-bounds in BTF parsing for arrays of nested structs, from Hou Tao. - Fix build ID fetching where memory areas backing the file were created with memfd_secret, from Andrii Nakryiko. - Fix BPF task iterator tid filtering which was incorrectly using pid instead of tid, from Jordan Rome. - Several fixes for BPF sockmap and BPF sockhash redirection in combination with vsocks, from Michal Luczaj. - Fix riscv BPF JIT and make BPF_CMPXCHG fully ordered, from Andrea Parri. - Fix riscv BPF JIT under CONFIG_CFI_CLANG to prevent the possibility of an infinite BPF tailcall, from Pu Lehui. - Fix a build warning from resolve_btfids that bpf_lsm_key_free cannot be resolved, from Thomas Weißschuh. - Fix a bug in kfunc BTF caching for modules where the wrong BTF object was returned, from Toke Høiland-Jørgensen. - Fix a BPF selftest compilation error in cgroup-related tests with musl libc, from Tony Ambardar. - Several fixes to BPF link info dumps to fill missing fields, from Tyrone Wu. - Add BPF selftests for kfuncs from multiple modules, checking that the correct kfuncs are called, from Simon Sundberg. - Ensure that internal and user-facing bpf_redirect flags don't overlap, also from Toke Høiland-Jørgensen. - Switch to use kvzmalloc to allocate BPF verifier environment, from Rik van Riel. - Use raw_spinlock_t in BPF ringbuf to fix a sleep in atomic splat under RT, from Wander Lairson Costa. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> -----BEGIN PGP SIGNATURE----- iIsEABYIADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZxK4OhUcZGFuaWVsQGlv Z2VhcmJveC5uZXQACgkQ2yufC7HISIOCrwEAib2kC5EEQn5+wKVE/bnZryVX2leT YXdfItDCBU6zCYUA+wTU5hGGn9lcDUcZx72l/KZPDyPw7HdzNJ+6iR1zQqoM =f9kv -----END PGP SIGNATURE----- Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Pull bpf fixes from Daniel Borkmann: - Fix BPF verifier to not affect subreg_def marks in its range propagation (Eduard Zingerman) - Fix a truncation bug in the BPF verifier's handling of coerce_reg_to_size_sx (Dimitar Kanaliev) - Fix the BPF verifier's delta propagation between linked registers under 32-bit addition (Daniel Borkmann) - Fix a NULL pointer dereference in BPF devmap due to missing rxq information (Florian Kauer) - Fix a memory leak in bpf_core_apply (Jiri Olsa) - Fix an UBSAN-reported array-index-out-of-bounds in BTF parsing for arrays of nested structs (Hou Tao) - Fix build ID fetching where memory areas backing the file were created with memfd_secret (Andrii Nakryiko) - Fix BPF task iterator tid filtering which was incorrectly using pid instead of tid (Jordan Rome) - Several fixes for BPF sockmap and BPF sockhash redirection in combination with vsocks (Michal Luczaj) - Fix riscv BPF JIT and make BPF_CMPXCHG fully ordered (Andrea Parri) - Fix riscv BPF JIT under CONFIG_CFI_CLANG to prevent the possibility of an infinite BPF tailcall (Pu Lehui) - Fix a build warning from resolve_btfids that bpf_lsm_key_free cannot be resolved (Thomas Weißschuh) - Fix a bug in kfunc BTF caching for modules where the wrong BTF object was returned (Toke Høiland-Jørgensen) - Fix a BPF selftest compilation error in cgroup-related tests with musl libc (Tony Ambardar) - Several fixes to BPF link info dumps to fill missing fields (Tyrone Wu) - Add BPF selftests for kfuncs from multiple modules, checking that the correct kfuncs are called (Simon Sundberg) - Ensure that internal and user-facing bpf_redirect flags don't overlap (Toke Høiland-Jørgensen) - Switch to use kvzmalloc to allocate BPF verifier environment (Rik van Riel) - Use raw_spinlock_t in BPF ringbuf to fix a sleep in atomic splat under RT (Wander Lairson Costa) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (38 commits) lib/buildid: Handle memfd_secret() files in build_id_parse() selftests/bpf: Add test case for delta propagation bpf: Fix print_reg_state's constant scalar dump bpf: Fix incorrect delta propagation between linked registers bpf: Properly test iter/task tid filtering bpf: Fix iter/task tid filtering riscv, bpf: Make BPF_CMPXCHG fully ordered bpf, vsock: Drop static vsock_bpf_prot initialization vsock: Update msg_count on read_skb() vsock: Update rx_bytes on read_skb() bpf, sockmap: SK_DROP on attempted redirects of unsupported af_vsock selftests/bpf: Add asserts for netfilter link info bpf: Fix link info netfilter flags to populate defrag flag selftests/bpf: Add test for sign extension in coerce_subreg_to_size_sx() selftests/bpf: Add test for truncation after sign extension in coerce_reg_to_size_sx() bpf: Fix truncation bug in coerce_reg_to_size_sx() selftests/bpf: Assert link info uprobe_multi count & path_size if unset bpf: Fix unpopulated path_size when uprobe_multi fields unset selftests/bpf: Fix cross-compiling urandom_read selftests/bpf: Add test for kfunc module order ... |
||
|
|
2e11e78667 |
riscv: dts: starfive: disable unused csi/camss nodes
Aurelien reported probe failures due to the csi node being enabled
without having a camera attached to it. A camera was in the initial
submissions, but was removed from the dts, as it had not actually been
present on the board, but was from an addon board used by the
developer of the relevant drivers. The non-camera pipeline nodes were
not disabled when this happened and the probe failures are problematic
for Debian. Disable them.
CC: stable@vger.kernel.org
Fixes:
|
||
|
|
e59db0623f |
riscv, bpf: Make BPF_CMPXCHG fully ordered
According to the prototype formal BPF memory consistency model
discussed e.g. in [1] and following the ordering properties of
the C/in-kernel macro atomic_cmpxchg(), a BPF atomic operation
with the BPF_CMPXCHG modifier is fully ordered. However, the
current RISC-V JIT lowerings fail to meet such memory ordering
property. This is illustrated by the following litmus test:
BPF BPF__MP+success_cmpxchg+fence
{
0:r1=x; 0:r3=y; 0:r5=1;
1:r2=y; 1:r4=f; 1:r7=x;
}
P0 | P1 ;
*(u64 *)(r1 + 0) = 1 | r1 = *(u64 *)(r2 + 0) ;
r2 = cmpxchg_64 (r3 + 0, r4, r5) | r3 = atomic_fetch_add((u64 *)(r4 + 0), r5) ;
| r6 = *(u64 *)(r7 + 0) ;
exists (1:r1=1 /\ 1:r6=0)
whose "exists" clause is not satisfiable according to the BPF
memory model. Using the current RISC-V JIT lowerings, the test
can be mapped to the following RISC-V litmus test:
RISCV RISCV__MP+success_cmpxchg+fence
{
0:x1=x; 0:x3=y; 0:x5=1;
1:x2=y; 1:x4=f; 1:x7=x;
}
P0 | P1 ;
sd x5, 0(x1) | ld x1, 0(x2) ;
L00: | amoadd.d.aqrl x3, x5, 0(x4) ;
lr.d x2, 0(x3) | ld x6, 0(x7) ;
bne x2, x4, L01 | ;
sc.d x6, x5, 0(x3) | ;
bne x6, x4, L00 | ;
fence rw, rw | ;
L01: | ;
exists (1:x1=1 /\ 1:x6=0)
where the two stores in P0 can be reordered. Update the RISC-V
JIT lowerings/implementation of BPF_CMPXCHG to emit an SC with
RELEASE ("rl") annotation in order to meet the expected memory
ordering guarantees. The resulting RISC-V JIT lowerings of
BPF_CMPXCHG match the RISC-V lowerings of the C atomic_cmpxchg().
Other lowerings were fixed via
|
||
|
|
30a59cc797 |
riscv, bpf: Fix possible infinite tailcall when CONFIG_CFI_CLANG is enabled
When CONFIG_CFI_CLANG is enabled, the number of prologue instructions
skipped by tailcall needs to include the kcfi instruction, otherwise the
TCC will be initialized every tailcall is called, which may result in
infinite tailcalls.
Fixes:
|
||
|
|
cfb10de185 |
riscv: Fix kernel stack size when KASAN is enabled
We use Kconfig to select the kernel stack size, doubling the default
size if KASAN is enabled.
But that actually only works if KASAN is selected from the beginning,
meaning that if KASAN config is added later (for example using
menuconfig), CONFIG_THREAD_SIZE_ORDER won't be updated, keeping the
default size, which is not enough for KASAN as reported in [1].
So fix this by moving the logic to compute the right kernel stack into a
header.
Fixes:
|
||
|
|
3efc57369a |
x86:
* KVM currently invalidates the entirety of the page tables, not just
those for the memslot being touched, when a memslot is moved or deleted.
The former does not have particularly noticeable overhead, but Intel's
TDX will require the guest to re-accept private pages if they are
dropped from the secure EPT, which is a non starter. Actually,
the only reason why this is not already being done is a bug which
was never fully investigated and caused VM instability with assigned
GeForce GPUs, so allow userspace to opt into the new behavior.
* Advertise AVX10.1 to userspace (effectively prep work for the "real" AVX10
functionality that is on the horizon).
* Rework common MSR handling code to suppress errors on userspace accesses to
unsupported-but-advertised MSRs. This will allow removing (almost?) all of
KVM's exemptions for userspace access to MSRs that shouldn't exist based on
the vCPU model (the actual cleanup is non-trivial future work).
* Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC) splits the
64-bit value into the legacy ICR and ICR2 storage, whereas Intel (APICv)
stores the entire 64-bit value at the ICR offset.
* Fix a bug where KVM would fail to exit to userspace if one was triggered by
a fastpath exit handler.
* Add fastpath handling of HLT VM-Exit to expedite re-entering the guest when
there's already a pending wake event at the time of the exit.
* Fix a WARN caused by RSM entering a nested guest from SMM with invalid guest
state, by forcing the vCPU out of guest mode prior to signalling SHUTDOWN
(the SHUTDOWN hits the VM altogether, not the nested guest)
* Overhaul the "unprotect and retry" logic to more precisely identify cases
where retrying is actually helpful, and to harden all retry paths against
putting the guest into an infinite retry loop.
* Add support for yielding, e.g. to honor NEED_RESCHED, when zapping rmaps in
the shadow MMU.
* Refactor pieces of the shadow MMU related to aging SPTEs in prepartion for
adding multi generation LRU support in KVM.
* Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is enabled,
i.e. when the CPU has already flushed the RSB.
* Trace the per-CPU host save area as a VMCB pointer to improve readability
and cleanup the retrieval of the SEV-ES host save area.
* Remove unnecessary accounting of temporary nested VMCB related allocations.
* Set FINAL/PAGE in the page fault error code for EPT violations if and only
if the GVA is valid. If the GVA is NOT valid, there is no guest-side page
table walk and so stuffing paging related metadata is nonsensical.
* Fix a bug where KVM would incorrectly synthesize a nested VM-Exit instead of
emulating posted interrupt delivery to L2.
* Add a lockdep assertion to detect unsafe accesses of vmcs12 structures.
* Harden eVMCS loading against an impossible NULL pointer deref (really truly
should be impossible).
* Minor SGX fix and a cleanup.
* Misc cleanups
Generic:
* Register KVM's cpuhp and syscore callbacks when enabling virtualization in
hardware, as the sole purpose of said callbacks is to disable and re-enable
virtualization as needed.
* Enable virtualization when KVM is loaded, not right before the first VM
is created. Together with the previous change, this simplifies a
lot the logic of the callbacks, because their very existence implies
virtualization is enabled.
* Fix a bug that results in KVM prematurely exiting to userspace for coalesced
MMIO/PIO in many cases, clean up the related code, and add a testcase.
* Fix a bug in kvm_clear_guest() where it would trigger a buffer overflow _if_
the gpa+len crosses a page boundary, which thankfully is guaranteed to not
happen in the current code base. Add WARNs in more helpers that read/write
guest memory to detect similar bugs.
Selftests:
* Fix a goof that caused some Hyper-V tests to be skipped when run on bare
metal, i.e. NOT in a VM.
* Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES guest.
* Explicitly include one-off assets in .gitignore. Past Sean was completely
wrong about not being able to detect missing .gitignore entries.
* Verify userspace single-stepping works when KVM happens to handle a VM-Exit
in its fastpath.
* Misc cleanups
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmb201AUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOM1gf+Ij7dpCh0KwoNYlHfW2aCHAv3PqQd
cKMDSGxoCernbJEyPO/3qXNUK+p4zKedk3d92snW3mKa+cwxMdfthJ3i9d7uoNiw
7hAgcfKNHDZGqAQXhx8QcVF3wgp+diXSyirR+h1IKrGtCCmjMdNC8ftSYe6voEkw
VTVbLL+tER5H0Xo5UKaXbnXKDbQvWLXkdIqM8dtLGFGLQ2PnF/DdMP0p6HYrKf1w
B7LBu0rvqYDL8/pS82mtR3brHJXxAr9m72fOezRLEUbfUdzkTUi/b1vEe6nDCl0Q
i/PuFlARDLWuetlR0VVWKNbop/C/l4EmwCcKzFHa+gfNH3L9361Oz+NzBw==
=Q7kz
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull x86 kvm updates from Paolo Bonzini:
"x86:
- KVM currently invalidates the entirety of the page tables, not just
those for the memslot being touched, when a memslot is moved or
deleted.
This does not traditionally have particularly noticeable overhead,
but Intel's TDX will require the guest to re-accept private pages
if they are dropped from the secure EPT, which is a non starter.
Actually, the only reason why this is not already being done is a
bug which was never fully investigated and caused VM instability
with assigned GeForce GPUs, so allow userspace to opt into the new
behavior.
- Advertise AVX10.1 to userspace (effectively prep work for the
"real" AVX10 functionality that is on the horizon)
- Rework common MSR handling code to suppress errors on userspace
accesses to unsupported-but-advertised MSRs
This will allow removing (almost?) all of KVM's exemptions for
userspace access to MSRs that shouldn't exist based on the vCPU
model (the actual cleanup is non-trivial future work)
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC)
splits the 64-bit value into the legacy ICR and ICR2 storage,
whereas Intel (APICv) stores the entire 64-bit value at the ICR
offset
- Fix a bug where KVM would fail to exit to userspace if one was
triggered by a fastpath exit handler
- Add fastpath handling of HLT VM-Exit to expedite re-entering the
guest when there's already a pending wake event at the time of the
exit
- Fix a WARN caused by RSM entering a nested guest from SMM with
invalid guest state, by forcing the vCPU out of guest mode prior to
signalling SHUTDOWN (the SHUTDOWN hits the VM altogether, not the
nested guest)
- Overhaul the "unprotect and retry" logic to more precisely identify
cases where retrying is actually helpful, and to harden all retry
paths against putting the guest into an infinite retry loop
- Add support for yielding, e.g. to honor NEED_RESCHED, when zapping
rmaps in the shadow MMU
- Refactor pieces of the shadow MMU related to aging SPTEs in
prepartion for adding multi generation LRU support in KVM
- Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is
enabled, i.e. when the CPU has already flushed the RSB
- Trace the per-CPU host save area as a VMCB pointer to improve
readability and cleanup the retrieval of the SEV-ES host save area
- Remove unnecessary accounting of temporary nested VMCB related
allocations
- Set FINAL/PAGE in the page fault error code for EPT violations if
and only if the GVA is valid. If the GVA is NOT valid, there is no
guest-side page table walk and so stuffing paging related metadata
is nonsensical
- Fix a bug where KVM would incorrectly synthesize a nested VM-Exit
instead of emulating posted interrupt delivery to L2
- Add a lockdep assertion to detect unsafe accesses of vmcs12
structures
- Harden eVMCS loading against an impossible NULL pointer deref
(really truly should be impossible)
- Minor SGX fix and a cleanup
- Misc cleanups
Generic:
- Register KVM's cpuhp and syscore callbacks when enabling
virtualization in hardware, as the sole purpose of said callbacks
is to disable and re-enable virtualization as needed
- Enable virtualization when KVM is loaded, not right before the
first VM is created
Together with the previous change, this simplifies a lot the logic
of the callbacks, because their very existence implies
virtualization is enabled
- Fix a bug that results in KVM prematurely exiting to userspace for
coalesced MMIO/PIO in many cases, clean up the related code, and
add a testcase
- Fix a bug in kvm_clear_guest() where it would trigger a buffer
overflow _if_ the gpa+len crosses a page boundary, which thankfully
is guaranteed to not happen in the current code base. Add WARNs in
more helpers that read/write guest memory to detect similar bugs
Selftests:
- Fix a goof that caused some Hyper-V tests to be skipped when run on
bare metal, i.e. NOT in a VM
- Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES
guest
- Explicitly include one-off assets in .gitignore. Past Sean was
completely wrong about not being able to detect missing .gitignore
entries
- Verify userspace single-stepping works when KVM happens to handle a
VM-Exit in its fastpath
- Misc cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
Documentation: KVM: fix warning in "make htmldocs"
s390: Enable KVM_S390_UCONTROL config in debug_defconfig
selftests: kvm: s390: Add VM run test case
KVM: SVM: let alternatives handle the cases when RSB filling is required
KVM: VMX: Set PFERR_GUEST_{FINAL,PAGE}_MASK if and only if the GVA is valid
KVM: x86/mmu: Use KVM_PAGES_PER_HPAGE() instead of an open coded equivalent
KVM: x86/mmu: Add KVM_RMAP_MANY to replace open coded '1' and '1ul' literals
KVM: x86/mmu: Fold mmu_spte_age() into kvm_rmap_age_gfn_range()
KVM: x86/mmu: Morph kvm_handle_gfn_range() into an aging specific helper
KVM: x86/mmu: Honor NEED_RESCHED when zapping rmaps and blocking is allowed
KVM: x86/mmu: Add a helper to walk and zap rmaps for a memslot
KVM: x86/mmu: Plumb a @can_yield parameter into __walk_slot_rmaps()
KVM: x86/mmu: Move walk_slot_rmaps() up near for_each_slot_rmap_range()
KVM: x86/mmu: WARN on MMIO cache hit when emulating write-protected gfn
KVM: x86/mmu: Detect if unprotect will do anything based on invalid_list
KVM: x86/mmu: Subsume kvm_mmu_unprotect_page() into the and_retry() version
KVM: x86: Rename reexecute_instruction()=>kvm_unprotect_and_retry_on_failure()
KVM: x86: Update retry protection fields when forcing retry on emulation failure
KVM: x86: Apply retry protection to "unprotect on failure" path
KVM: x86: Check EMULTYPE_WRITE_PF_TO_SP before unprotecting gfn
...
|
||
|
|
5701725692 |
Rust changes for v6.12
Toolchain and infrastructure:
- Support 'MITIGATION_{RETHUNK,RETPOLINE,SLS}' (which cleans up objtool
warnings), teach objtool about 'noreturn' Rust symbols and mimic
'___ADDRESSABLE()' for 'module_{init,exit}'. With that, we should be
objtool-warning-free, so enable it to run for all Rust object files.
- KASAN (no 'SW_TAGS'), KCFI and shadow call sanitizer support.
- Support 'RUSTC_VERSION', including re-config and re-build on change.
- Split helpers file into several files in a folder, to avoid conflicts
in it. Eventually those files will be moved to the right places with
the new build system. In addition, remove the need to manually export
the symbols defined there, reusing existing machinery for that.
- Relax restriction on configurations with Rust + GCC plugins to just
the RANDSTRUCT plugin.
'kernel' crate:
- New 'list' module: doubly-linked linked list for use with reference
counted values, which is heavily used by the upcoming Rust Binder.
This includes 'ListArc' (a wrapper around 'Arc' that is guaranteed
unique for the given ID), 'AtomicTracker' (tracks whether a 'ListArc'
exists using an atomic), 'ListLinks' (the prev/next pointers for an
item in a linked list), 'List' (the linked list itself), 'Iter' (an
iterator over a 'List'), 'Cursor' (a cursor into a 'List' that allows
to remove elements), 'ListArcField' (a field exclusively owned by a
'ListArc'), as well as support for heterogeneous lists.
- New 'rbtree' module: red-black tree abstractions used by the upcoming
Rust Binder. This includes 'RBTree' (the red-black tree itself),
'RBTreeNode' (a node), 'RBTreeNodeReservation' (a memory reservation
for a node), 'Iter' and 'IterMut' (immutable and mutable iterators),
'Cursor' (bidirectional cursor that allows to remove elements), as
well as an entry API similar to the Rust standard library one.
- 'init' module: add 'write_[pin_]init' methods and the 'InPlaceWrite'
trait. Add the 'assert_pinned!' macro.
- 'sync' module: implement the 'InPlaceInit' trait for 'Arc' by
introducing an associated type in the trait.
- 'alloc' module: add 'drop_contents' method to 'BoxExt'.
- 'types' module: implement the 'ForeignOwnable' trait for
'Pin<Box<T>>' and improve the trait's documentation. In addition,
add the 'into_raw' method to the 'ARef' type.
- 'error' module: in preparation for the upcoming Rust support for
32-bit architectures, like arm, locally allow Clippy lint for those.
Documentation:
- https://rust.docs.kernel.org has been announced, so link to it.
- Enable rustdoc's "jump to definition" feature, making its output a
bit closer to the experience in a cross-referencer.
- Debian Testing now also provides recent Rust releases (outside of
the freeze period), so add it to the list.
MAINTAINERS:
- Trevor is joining as reviewer of the "RUST" entry.
And a few other small bits.
-----BEGIN PGP SIGNATURE-----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=52BN
-----END PGP SIGNATURE-----
Merge tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Support 'MITIGATION_{RETHUNK,RETPOLINE,SLS}' (which cleans up
objtool warnings), teach objtool about 'noreturn' Rust symbols and
mimic '___ADDRESSABLE()' for 'module_{init,exit}'. With that, we
should be objtool-warning-free, so enable it to run for all Rust
object files.
- KASAN (no 'SW_TAGS'), KCFI and shadow call sanitizer support.
- Support 'RUSTC_VERSION', including re-config and re-build on
change.
- Split helpers file into several files in a folder, to avoid
conflicts in it. Eventually those files will be moved to the right
places with the new build system. In addition, remove the need to
manually export the symbols defined there, reusing existing
machinery for that.
- Relax restriction on configurations with Rust + GCC plugins to just
the RANDSTRUCT plugin.
'kernel' crate:
- New 'list' module: doubly-linked linked list for use with reference
counted values, which is heavily used by the upcoming Rust Binder.
This includes 'ListArc' (a wrapper around 'Arc' that is guaranteed
unique for the given ID), 'AtomicTracker' (tracks whether a
'ListArc' exists using an atomic), 'ListLinks' (the prev/next
pointers for an item in a linked list), 'List' (the linked list
itself), 'Iter' (an iterator over a 'List'), 'Cursor' (a cursor
into a 'List' that allows to remove elements), 'ListArcField' (a
field exclusively owned by a 'ListArc'), as well as support for
heterogeneous lists.
- New 'rbtree' module: red-black tree abstractions used by the
upcoming Rust Binder.
This includes 'RBTree' (the red-black tree itself), 'RBTreeNode' (a
node), 'RBTreeNodeReservation' (a memory reservation for a node),
'Iter' and 'IterMut' (immutable and mutable iterators), 'Cursor'
(bidirectional cursor that allows to remove elements), as well as
an entry API similar to the Rust standard library one.
- 'init' module: add 'write_[pin_]init' methods and the
'InPlaceWrite' trait. Add the 'assert_pinned!' macro.
- 'sync' module: implement the 'InPlaceInit' trait for 'Arc' by
introducing an associated type in the trait.
- 'alloc' module: add 'drop_contents' method to 'BoxExt'.
- 'types' module: implement the 'ForeignOwnable' trait for
'Pin<Box<T>>' and improve the trait's documentation. In addition,
add the 'into_raw' method to the 'ARef' type.
- 'error' module: in preparation for the upcoming Rust support for
32-bit architectures, like arm, locally allow Clippy lint for
those.
Documentation:
- https://rust.docs.kernel.org has been announced, so link to it.
- Enable rustdoc's "jump to definition" feature, making its output a
bit closer to the experience in a cross-referencer.
- Debian Testing now also provides recent Rust releases (outside of
the freeze period), so add it to the list.
MAINTAINERS:
- Trevor is joining as reviewer of the "RUST" entry.
And a few other small bits"
* tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux: (54 commits)
kasan: rust: Add KASAN smoke test via UAF
kbuild: rust: Enable KASAN support
rust: kasan: Rust does not support KHWASAN
kbuild: rust: Define probing macros for rustc
kasan: simplify and clarify Makefile
rust: cfi: add support for CFI_CLANG with Rust
cfi: add CONFIG_CFI_ICALL_NORMALIZE_INTEGERS
rust: support for shadow call stack sanitizer
docs: rust: include other expressions in conditional compilation section
kbuild: rust: replace proc macros dependency on `core.o` with the version text
kbuild: rust: rebuild if the version text changes
kbuild: rust: re-run Kconfig if the version text changes
kbuild: rust: add `CONFIG_RUSTC_VERSION`
rust: avoid `box_uninit_write` feature
MAINTAINERS: add Trevor Gross as Rust reviewer
rust: rbtree: add `RBTree::entry`
rust: rbtree: add cursor
rust: rbtree: add mutable iterator
rust: rbtree: add iterator
rust: rbtree: add red-black tree implementation backed by the C version
...
|
||
|
|
97d8894b6f |
RISC-V Patches for the 6.12 Merge Window, Part 1
* Support for using Zkr to seed KASLR. * Support for IPI-triggered CPU backtracing. * Support for generic CPU vulnerabilities reporting to userspace. * A few cleanups for missing licenses. * The size limit on the XIP kernel has been removed. * Support for tracing userspace stacks. * Support for the Svvptc extension. * Various cleanups and fixes throughout the tree. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmbykZITHHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiTDLEACABTPlMX+Ke1lMYWj6MLBTXMSlQJ6w TKLVk3slp4POPsd+ViWy4J6EJDpCkNp6iK30Bv4AGainA3RJnbS7neKYy+MTw0ZV pJWTn73sxHeF+APnZ+geFYcmyteL/SZplgHgwLipFaojs7i/+tOvLFRRD3LueCz6 Q6Muvke9R5uN6LL3tUrmIhJeyZjOwJtKEYoRz6Fo5Tq3RRK0VHYZkdpqRQ86rr9U yNbRNlBLlANstq8xjtiwm22ImPGIsvvhs0AvFft0H72zhf3Tfy0VcTLlDJYwkdKN Bz59v4N4jg1ajXuAsj4/BQdj5uRkzJNZ3Yq1yvMmGI+2UV1tInHEMeZi63+4gs8F 0FYCziA+j6/08u8v8CrwdDOpJ9Iq/NMV6359bt5ySu3rM6QnPRGnHGkv4Ptk9Oyh sSPiuHS8YxpRBOB8xXNp5xFipTZ4+65VqCz253pAsbbp5aZ/o9Jw/bbBFFWcSsRZ tV2xhELVzPiC7dowfYkQhcNZOLlCaJ/Mvo2nMOtjbUwzaXkcjIRcYEy7+dTlfXyr 3h5sStjWAKEmtLEvCYSI+lAT544tbV1x+lCMJGuvztapsTMtAP4GpQKblXl5qqnV L+VWIPJV1elI26H/p/Max9Z1s48NtfwoJSRL7Rnaya6uJ3iWG/BtajHlFbvgOkJf ObPZ//Yr9e91gg== =zDwL -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support using Zkr to seed KASLR - Support IPI-triggered CPU backtracing - Support for generic CPU vulnerabilities reporting to userspace - A few cleanups for missing licenses - The size limit on the XIP kernel has been removed - Support for tracing userspace stacks - Support for the Svvptc extension - Various cleanups and fixes throughout the tree * tag 'riscv-for-linus-6.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (47 commits) crash: Fix riscv64 crash memory reserve dead loop perf/riscv-sbi: Add platform specific firmware event handling tools: Optimize ring buffer for riscv tools: Add riscv barrier implementation RISC-V: Don't have MAX_PHYSMEM_BITS exceed phys_addr_t ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE riscv: Enable bitops instrumentation riscv: Omit optimized string routines when using KASAN ACPI: RISCV: Make acpi_numa_get_nid() to be static riscv: Randomize lower bits of stack address selftests: riscv: Allow mmap test to compile on 32-bit riscv: Make riscv_isa_vendor_ext_andes array static riscv: Use LIST_HEAD() to simplify code riscv: defconfig: Disable RZ/Five peripheral support RISC-V: Implement kgdb_roundup_cpus() to enable future NMI Roundup riscv: avoid Imbalance in RAS riscv: cacheinfo: Add back init_cache_level() function riscv: Remove unused _TIF_WORK_MASK drivers/perf: riscv: Remove redundant macro check riscv: define ILLEGAL_POINTER_VALUE for 64bit ... |
||
|
|
4e2c9cd7dc |
i2c-for-6.12-rc1
I2C core
========
After 15 years of deprecation, the I2C_COMPAT symbol has finally been
removed. Also client addresses are now locked during initialization to
prevent race conditions between different kinds of instantiation. Scoped
foreach OF child loops are now used. And the testunit has received some
cleanups and documentation improvements as well as two new tests, one
for repeated start and one for triggering SMBusAlert interrupts.
I2C host drivers
================
The DesignWare and the Renesas I2C drivers have received most of
the changes in this pull request.
The first has has undergone through a series of cleanups that
have been sent to the mailing list a year ago for the first time
and finally get merged in this pull request. They are many, from
typos (e.g. i2/i2c), to cosmetics, to refactoring (e.g. move
inline functions to librarieas) and many others.
Besides that, all the DesignWare Kconfig options have been
grouped under the I2C_DESIGNWARE_CORE and this required some
adaptation in many of the kernel configuration files for
different arm and mips boards.
Follows the list of the rest of the changes grouped by type of
change.
Cleanups
--------
The Qualcomm Geni platform improves the exit path in the runtime
resume function.
The Intel LJCA driver loses "target_addr" parameter in
ljca_i2c_stop() because it was unused.
The MediaTek controller intializes the restart_flag in the
transfer function using the ternary conditional operator ("? :")
instead of initializing it in different parts.
Constified a few global data structures in the virtio driver.
The Renesas driver simplifies the bus speed handling in the init
function making it more readable.
Improved an if/else statement in probe function of the Renesas
R-Car driver.
The iMX/MXC driver switches to using the RUNTIME_PM_OPS() instead
of SET_RUNTIME_PM_OPS().
Still in the iMX/MXC driver a comma ',' has been replaced by a
semicolon ';', while in different drivers the ',' has been
removed from the '{ }' delimiters.
Finally three devm_clk_get_enabled() have been used to simplify
the devm_clk_get/clk_prepare_enable tuple in the Renesas EMEV2,
Ingenic and MPC drivers.
Refactors
---------
The Nuvoton fixes a potential out of boundary array access. This
is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The
change makes the driver more future proof and, at the same time,
silences code analyzers.
Improvements
------------
The Renesas I2C (riic) driver undergoes several patches improving
the runtime power management handling.
The Intel i801 driver uses a more descriptive adapter's name to
show the presence of the IDF feature.
In the Intel Denverton (ismt) adapter the pending transactions
are killed when irq's can't complete their handling, triggering a
timeout. This could have been considered as a bug fix, but
because, standing to Vasily, it's very sporadic, I preferred
considering the patch rather as an improvement.
New Feature
-----------
The Renesas I2C (riic) driver now supports the fast mode plus.
New support
-----------
Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
The Keba comes with a new driver, i2c-keba.c.
The Mule is an i2c multiplexer and it also comes with a new
driver, mux/i2c-mux-mule.c.
Core patch
----------
This pull request includes also a patch in the I2C framework, in
i2c-core-base.c where the runtime PM functions have been replaced
in order to allow to be accessed during the device add.
Devicetree
----------
Some cleanups in the devicetree, as well. nVidia and Qualcomm
bindings improve their "if:then:" blocks. While the aspeed
binding loses the "multi-master" property because it was
redundant.
The i2c-sprd binding has been converted to YAML.
AT24 updates
============
- document a new model from giantec in DT bindings
-----BEGIN PGP SIGNATURE-----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=DTNY
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C core:
- finally remove the I2C_COMPAT symbol after 15 years of deprecation
- lock client addresses during initialization to prevent race
conditions between different kinds of instantiation
- use scoped foreach OF child loops
- testunit cleanups and documentation improvements, as well as two
new tests, one for repeated start and one for triggering SMBusAlert
interrupts
I2C host drivers:
- DesignWare and Renesas I2C driver updates.
The first has has undergone through a series of cleanups that have
been sent to the mailing list a year ago for the first time and
finally get merged in this pull request. They are many, from typos
(e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline
functions to librarieas) and many others.
- all the DesignWare Kconfig options have been grouped under the
I2C_DESIGNWARE_CORE and this required some adaptation in many of
the kernel configuration files for different arm and mips boards
Cleanups:
- improve the exit path in the runtime resume function for the
Qualcomm Geni platform
- get rid of the unused "target_addr" parameter in the Intel LJCA
driver
- intialize the restart_flag in the MediaTek controller in one single
place
- constify a few global data structures in the virtio driver
- simplify the bus speed handling in the Renesas driver init function
making it more readable
- improved probe function of the Renesas R-Car driver
- switch the iMX/MXC driver to use RUNTIME_PM_OPS() instead of
SET_RUNTIME_PM_OPS()
- iMX/MXC driver cleanups
- use devm_clk_get_enabled() to simplify the Renesas EMEV2, Ingenic
and MPC drivers
Refactoring:
- Fix a potential out of boundary array access in the Nuvoton driver.
This is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The change
makes the driver more future proof and, at the same time, silences
code analyzers.
Improvements:
- several patches improving the runtime power management handling of
the Renesas I2C (riic) driver
- use a more descriptive adapter name in the Intel i801 driver to
show the presence of the IDF feature
- kill pending transactions when irq's can't complete their handling
in the Intel Denverton (ismt) driver, triggering a timeout
New Feature:
- support fast mode plus in the Renesas I2C (riic) driver
New support:
- Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
- new i2c-keba.c driver
- new driver for The Mule i2c multiplexer
Core I2C framework:
- move runtime PM functions in order to allow them to be accessed
during device add
Devicetree:
- nVidia and Qualcomm binding improvements
- get rid of redundant "multi-master" property in the aspeed binding
- convert i2c-sprd binding to YAML
AT24 updates:
- document a new model from giantec in DT bindings"
* tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
i2c: designware: Use pci_get_drvdata()
i2c: designware: Propagate firmware node
i2c: designware: Uninline i2c_dw_probe()
i2c: ljca: Remove unused "target_addr" parameter
i2c: keba: Add KEBA I2C controller support
i2c: i801: Use a different adapter-name for IDF adapters
i2c: core: Setup i2c_adapter runtime-pm before calling device_add()
dt-bindings: i2c: i2c-sprd: convert to YAML
i2c: ismt: kill transaction in hardware on timeout
i2c: designware: Group all DesignWare drivers under a single option
net: txgbe: Fix I2C Kconfig dependencies
RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
mips: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
arm64: defconfig: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARC: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe()
i2c: imx: Convert comma to semicolon
i2c: jz4780: Use devm_clk_get_enabled() helpers
...
|
||
|
|
7856a56541 |
Many singleton patches - please see the various changelogs for details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
"mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64() to
provide (much) more accurate results. The current implementation was
causing Uwe some issues in the PWM drivers.
"xz: Updates to license, filters, and compression options" from Lasse
Collin. Miscellaneous maintenance and kinor feature work to the xz
decompressor.
"Fix some GDB command error and add some GDB commands" from Kuan-Ying Lee.
Fixes and enhancements to the gdb scripts.
"treewide: add missing MODULE_DESCRIPTION() macros" from Jeff Johnson.
Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of warnings about this.
"nilfs2: add support for some common ioctls" from Ryusuke Konishi. Adds
various commonly-available ioctls to nilfs2.
"This series fixes a number of formatting issues in kernel doc comments"
from Ryusuke Konishi does that.
"nilfs2: prevent unexpected ENOENT propagation" from Ryusuke Konishi. Fix
issues where -ENOENT was being unintentionally and inappropriately
returned to userspace.
"nilfs2: assorted cleanups" from Huang Xiaojia.
"nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2 filesystems.
"scripts/decode_stacktrace.sh: improve error reporting and usability" from
Luca Ceresoli does those things.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu7dpAAKCRDdBJ7gKXxA
jsPqAPwMDEZyKlfSw7QioEHNHDkmkbP7VYCYR0CbUnppbztwpAD8D37aVbWQ+UzM
3nnOq3W2Pc2o/20zqi8Upf1mnvUrygQ=
=/NWE
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Many singleton patches - please see the various changelogs for
details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
- "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
to provide (much) more accurate results. The current implementation
was causing Uwe some issues in the PWM drivers.
- "xz: Updates to license, filters, and compression options" from
Lasse Collin. Miscellaneous maintenance and kinor feature work to
the xz decompressor.
- "Fix some GDB command error and add some GDB commands" from
Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.
- "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
warnings about this.
- "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
Adds various commonly-available ioctls to nilfs2.
- "This series fixes a number of formatting issues in kernel doc
comments" from Ryusuke Konishi does that.
- "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
Konishi. Fix issues where -ENOENT was being unintentionally and
inappropriately returned to userspace.
- "nilfs2: assorted cleanups" from Huang Xiaojia.
- "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2
filesystems.
- "scripts/decode_stacktrace.sh: improve error reporting and
usability" from Luca Ceresoli does those things"
* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
list: test: increase coverage of list_test_list_replace*()
list: test: fix tests for list_cut_position()
proc: use __auto_type more
treewide: correct the typo 'retun'
ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
nilfs2: remove duplicate 'unlikely()' usage
nilfs2: fix potential oob read in nilfs_btree_check_delete()
nilfs2: determine empty node blocks as corrupted
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
tools/mm: rm thp_swap_allocator_test when make clean
squashfs: fix percpu address space issues in decompressor_multi_percpu.c
lib: glob.c: added null check for character class
nilfs2: refactor nilfs_segctor_thread()
nilfs2: use kthread_create and kthread_stop for the log writer thread
nilfs2: remove sc_timer_task
nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
nilfs2: eliminate the shared counter and spinlock for i_generation
nilfs2: separate inode type information from i_state field
nilfs2: use the BITS_PER_LONG macro
...
|
||
|
|
617a814f14 |
ALong with the usual shower of singleton patches, notable patch series in
this pull request are:
"Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
"Some cleanups for shmem" from Baolin Wang. No functional changes - mode
code reuse, better function naming, logic simplifications.
"mm: some small page fault cleanups" from Josef Bacik. No functional
changes - code cleanups only.
"Various memory tiering fixes" from Zi Yan. A small fix and a little
cleanup.
"mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
"Kernel stack usage histogram" from Pasha Tatashin and Shakeel Butt. This
is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at all
used 16k. Useful for some system tuning things, but partivularly useful
for "the dynamic kernel stack project".
"kmemleak: support for percpu memory leak detect" from Pavel Tikhomirov.
Teaches kmemleak to detect leaksage of percpu memory.
"mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
"mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from David
Hildenbrand. Improves PTE/PMD splitlock detection, makes powerpc/8xx work
correctly by design rather than by accident.
"mm: remove arch_make_page_accessible()" from David Hildenbrand. Some
folio conversions which make arch_make_page_accessible() unneeded.
"mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David Finkel.
Cleans up and fixes our handling of the resetting of the cgroup/process
peak-memory-use detector.
"Make core VMA operations internal and testable" from Lorenzo Stoakes.
Rationalizaion and encapsulation of the VMA manipulation APIs. With a
view to better enable testing of the VMA functions, even from a
userspace-only harness.
"mm: zswap: fixes for global shrinker" from Takero Funaki. Fix issues in
the zswap global shrinker, resulting in improved performance.
"mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill in
some missing info in /proc/zoneinfo.
"mm: replace follow_page() by folio_walk" from David Hildenbrand. Code
cleanups and rationalizations (conversion to folio_walk()) resulting in
the removal of follow_page().
"improving dynamic zswap shrinker protection scheme" from Nhat Pham. Some
tuning to improve zswap's dynamic shrinker. Significant reductions in
swapin and improvements in performance are shown.
"mm: Fix several issues with unaccepted memory" from Kirill Shutemov.
Improvements to the new unaccepted memory feature,
"mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on DAX
PUDs. This was missing, although nobody seems to have notied yet.
"Introduce a store type enum for the Maple tree" from Sidhartha Kumar.
Cleanups and modest performance improvements for the maple tree library
code.
"memcg: further decouple v1 code from v2" from Shakeel Butt. Move more
cgroup v1 remnants away from the v2 memcg code.
"memcg: initiate deprecation of v1 features" from Shakeel Butt. Adds
various warnings telling users that memcg v1 features are deprecated.
"mm: swap: mTHP swap allocator base on swap cluster order" from Chris Li.
Greatly improves the success rate of the mTHP swap allocation.
"mm: introduce numa_memblks" from Mike Rapoport. Moves various disparate
per-arch implementations of numa_memblk code into generic code.
"mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
"support large folio swap-out and swap-in for shmem" from Baolin Wang.
With this series we no longer split shmem large folios into simgle-page
folios when swapping out shmem.
"mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice performance
improvements and code reductions for gigantic folios.
"support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
"mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
"Increase the number of bits available in page_type" from Matthew Wilcox.
Increases the number of bits available in page_type!
"Simplify the page flags a little" from Matthew Wilcox. Many legacy page
flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
"mm: store zero pages to be swapped out in a bitmap" from Usama Arif. An
optimization which permits us to avoid writing/reading zero-filled zswap
pages to backing store.
"Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race window
which occurs when a MAP_FIXED operqtion is occurring during an unrelated
vma tree walk.
"mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of the
vma_merge() functionality, making ot cleaner, more testable and better
tested.
"misc fixups for DAMON {self,kunit} tests" from SeongJae Park. Minor
fixups of DAMON selftests and kunit tests.
"mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang. Code
cleanups and folio conversions.
"Shmem mTHP controls and stats improvements" from Ryan Roberts. Cleanups
for shmem controls and stats.
"mm: count the number of anonymous THPs per size" from Barry Song. Expose
additional anon THP stats to userspace for improved tuning.
"mm: finish isolate/putback_lru_page()" from Kefeng Wang: more folio
conversions and removal of now-unused page-based APIs.
"replace per-quota region priorities histogram buffer with per-context
one" from SeongJae Park. DAMON histogram rationalization.
"Docs/damon: update GitHub repo URLs and maintainer-profile" from SeongJae
Park. DAMON documentation updates.
"mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and improve
related doc and warn" from Jason Wang: fixes usage of page allocator
__GFP_NOFAIL and GFP_ATOMIC flags.
"mm: split underused THPs" from Yu Zhao. Improve THP=always policy - this
was overprovisioning THPs in sparsely accessed memory areas.
"zram: introduce custom comp backends API" frm Sergey Senozhatsky. Add
support for zram run-time compression algorithm tuning.
"mm: Care about shadow stack guard gap when getting an unmapped area" from
Mark Brown. Fix up the various arch_get_unmapped_area() implementations
to better respect guard areas.
"Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability of
mem_cgroup_iter() and various code cleanups.
"mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
"resource: Fix region_intersects() vs add_memory_driver_managed()" from
Huang Ying. Fix a bug in region_intersects() for systems with CXL memory.
"mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches a
couple more code paths to correctly recover from the encountering of
poisoned memry.
"mm: enable large folios swap-in support" from Barry Song. Support the
swapin of mTHP memory into appropriately-sized folios, rather than into
single-page folios.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu1BBwAKCRDdBJ7gKXxA
jlWNAQDYlqQLun7bgsAN4sSvi27VUuWv1q70jlMXTfmjJAvQqwD/fBFVR6IOOiw7
AkDbKWP2k0hWPiNJBGwoqxdHHx09Xgo=
=s0T+
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
|
||
|
|
f0c9363db2 |
perf/riscv-sbi: Add platform specific firmware event handling
The SBI v2.0 specification pointed to by the link below reserves the event code 0xffff for platform specific firmware events. Update the driver to be able to parse and program such events. The platform specific firmware events must now be specified in the perf command as below: perf stat -e rCxxx ... where bits[63:62] = 0x3 of the event config indicate a platform specific firmware event and xxx indicate the actual event code which is passed as the event data. Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Link: https://github.com/riscv-non-isa/riscv-sbi-doc/releases/download/v2.0/riscv-sbi.pdf Link: https://lore.kernel.org/r/20240812051109.6496-1-mchitale@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |