commit c2b47df81c upstream.
[BUG]
With CONFIG_DEBUG_VM set, test case generic/476 has some chance to crash
with the following VM_BUG_ON_FOLIO():
BTRFS error (device dm-3): cow_file_range failed, start 1146880 end 1253375 len 106496 ret -28
BTRFS error (device dm-3): run_delalloc_nocow failed, start 1146880 end 1253375 len 106496 ret -28
page: refcount:4 mapcount:0 mapping:00000000592787cc index:0x12 pfn:0x10664
aops:btrfs_aops [btrfs] ino:101 dentry name(?):"f1774"
flags: 0x2fffff80004028(uptodate|lru|private|node=0|zone=2|lastcpupid=0xfffff)
page dumped because: VM_BUG_ON_FOLIO(!folio_test_locked(folio))
------------[ cut here ]------------
kernel BUG at mm/page-writeback.c:2992!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 2 UID: 0 PID: 3943513 Comm: kworker/u24:15 Tainted: G OE 6.12.0-rc7-custom+ #87
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs]
pc : folio_clear_dirty_for_io+0x128/0x258
lr : folio_clear_dirty_for_io+0x128/0x258
Call trace:
folio_clear_dirty_for_io+0x128/0x258
btrfs_folio_clamp_clear_dirty+0x80/0xd0 [btrfs]
__process_folios_contig+0x154/0x268 [btrfs]
extent_clear_unlock_delalloc+0x5c/0x80 [btrfs]
run_delalloc_nocow+0x5f8/0x760 [btrfs]
btrfs_run_delalloc_range+0xa8/0x220 [btrfs]
writepage_delalloc+0x230/0x4c8 [btrfs]
extent_writepage+0xb8/0x358 [btrfs]
extent_write_cache_pages+0x21c/0x4e8 [btrfs]
btrfs_writepages+0x94/0x150 [btrfs]
do_writepages+0x74/0x190
filemap_fdatawrite_wbc+0x88/0xc8
start_delalloc_inodes+0x178/0x3a8 [btrfs]
btrfs_start_delalloc_roots+0x174/0x280 [btrfs]
shrink_delalloc+0x114/0x280 [btrfs]
flush_space+0x250/0x2f8 [btrfs]
btrfs_async_reclaim_data_space+0x180/0x228 [btrfs]
process_one_work+0x164/0x408
worker_thread+0x25c/0x388
kthread+0x100/0x118
ret_from_fork+0x10/0x20
Code: 910a8021 a90363f7 a9046bf9 94012379 (d4210000)
---[ end trace 0000000000000000 ]---
[CAUSE]
The first two lines of extra debug messages show the problem is caused
by the error handling of run_delalloc_nocow().
E.g. we have the following dirtied range (4K blocksize 4K page size):
0 16K 32K
|//////////////////////////////////////|
| Pre-allocated |
And the range [0, 16K) has a preallocated extent.
- Enter run_delalloc_nocow() for range [0, 16K)
Which found range [0, 16K) is preallocated, can do the proper NOCOW
write.
- Enter fallback_to_fow() for range [16K, 32K)
Since the range [16K, 32K) is not backed by preallocated extent, we
have to go COW.
- cow_file_range() failed for range [16K, 32K)
So cow_file_range() will do the clean up by clearing folio dirty,
unlock the folios.
Now the folios in range [16K, 32K) is unlocked.
- Enter extent_clear_unlock_delalloc() from run_delalloc_nocow()
Which is called with PAGE_START_WRITEBACK to start page writeback.
But folios can only be marked writeback when it's properly locked,
thus this triggered the VM_BUG_ON_FOLIO().
Furthermore there is another hidden but common bug that
run_delalloc_nocow() is not clearing the folio dirty flags in its error
handling path.
This is the common bug shared between run_delalloc_nocow() and
cow_file_range().
[FIX]
- Clear folio dirty for range [@start, @cur_offset)
Introduce a helper, cleanup_dirty_folios(), which
will find and lock the folio in the range, clear the dirty flag and
start/end the writeback, with the extra handling for the
@locked_folio.
- Introduce a helper to clear folio dirty, start and end writeback
- Introduce a helper to record the last failed COW range end
This is to trace which range we should skip, to avoid double
unlocking.
- Skip the failed COW range for the error handling
CC: stable@vger.kernel.org
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0f038104f upstream.
There is a recent ML report that mounting a large fs backed by hardware
RAID56 controller (with one device missing) took too much time, and
systemd seems to kill the mount attempt.
In that case, the only error message is:
BTRFS error (device sdj): open_ctree failed
There is no reason on why the failure happened, making it very hard to
understand the reason.
At least output the error number (in the particular case it should be
-EINTR) to provide some clue.
Link: https://lore.kernel.org/linux-btrfs/9b9c4d2810abcca2f9f76e32220ed9a90febb235.camel@scientia.org/
Reported-by: Christoph Anton Mitterer <calestyo@scientia.org>
Cc: stable@vger.kernel.org
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4ed930379 upstream.
If the filesystem has an external log device on pmem and the pmem
reports a media error beyond the end of the log area, don't shut down
the filesystem because we don't use that space.
Cc: <stable@vger.kernel.org> # v6.0
Fixes: 6f643c57d5 ("xfs: implement ->notify_failure() for XFS")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07eae0fa67 upstream.
Commit 32dd4f9c50 ("xfs: remove a superflous hash lookup when inserting
new buffers") converted xfs_buf_find_insert to use
rhashtable_lookup_get_insert_fast and thus an operation that returns the
existing buffer when an insert would duplicate the hash key. But this
code path misses the check for a buffer with a reference count of zero,
which could lead to reusing an about to be freed buffer. Fix this by
using the same atomic_inc_not_zero pattern as xfs_buf_insert.
Fixes: 32dd4f9c50 ("xfs: remove a superflous hash lookup when inserting new buffers")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: stable@vger.kernel.org # v6.0
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91b587ba79 upstream.
This patch addresses an issue where some files in case-insensitive
directories become inaccessible due to changes in how the kernel function,
utf8_casefold(), generates case-folded strings from the commit 5c26d2f1d3
("unicode: Don't special case ignorable code points").
F2FS uses these case-folded names to calculate hash values for locating
dentries and stores them on disk. Since utf8_casefold() can produce
different output across kernel versions, stored hash values and newly
calculated hash values may differ. This results in affected files no
longer being found via the hash-based lookup.
To resolve this, the patch introduces a linear search fallback.
If the initial hash-based search fails, F2FS will sequentially scan the
directory entries.
Fixes: 5c26d2f1d3 ("unicode: Don't special case ignorable code points")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219586
Signed-off-by: Daniel Lee <chullee@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8b19dfb34d ]
SMB1 callback get_cifs_acl_by_fid() currently ignores its last argument and
therefore ignores request for SACL_SECINFO. Fix this issue by correctly
propagating info argument from get_cifs_acl() and get_cifs_acl_by_fid() to
CIFSSMBGetCIFSACL() function and pass SACL_SECINFO when requested.
For accessing SACLs it is needed to open object with SYSTEM_SECURITY
access. Pass this flag when trying to get or set SACLs.
Same logic is in the SMB2+ code path.
This change fixes getting and setting of "system.cifs_ntsd_full" and
"system.smb3_ntsd_full" xattrs over SMB1 as currently it silentely ignored
SACL part of passed xattr buffer.
Fixes: 3970acf7dd ("SMB3: Add support for getting and setting SACLs")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef201e8759 ]
Major and minor numbers for char and block devices are mandatory for stat.
So check that the WSL EA $LXDEV is present for WSL CHR and BLK reparse
points.
WSL reparse point tag determinate type of the file. But file type is
present also in the WSL EA $LXMOD. So check that both file types are same.
Fixes: 78e26bec4d ("smb: client: parse uid, gid, mode and dev from WSL reparse points")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60a6002432 ]
strcpy() should not be used with destination potentially overlapping
the source; what's more, strscpy() in there is pointless - we already
know the amount we want to copy; might as well use memcpy().
Fixes: c278e81b8a "hostfs: Remove open coded strcpy()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdb0ca39e0 ]
Clearing slab cache will free all znode in memory and make
c->zroot.znode = NULL, then dumping tnc tree will access
c->zroot.znode which cause null pointer dereference.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219624#c0
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: pangliyuan <pangliyuan1@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 668135b934 ]
OFFLOAD_CANCEL should be marked MOVEABLE for when we need to move
tasks off a non-functional transport.
Fixes: c975c20926 ("NFS send OFFLOAD_CANCEL when COPY killed")
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8380c2d06 ]
We need to include sequence size in the compound.
Fixes: 0491567b51 ("NFS: add COPY_NOTIFY operation")
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ead11ac50a ]
nfs4_stat_to_errno() expects a NFSv4 error code as an argument and
returns a POSIX errno.
The problem is LOCALIO is passing nfs4_stat_to_errno() the POSIX errno
return values from filp->f_op->read_iter(), filp->f_op->write_iter()
and vfs_fsync_range().
So the POSIX errno that nfs_local_pgio_done() and
nfs_local_commit_done() are passing to nfs4_stat_to_errno() are
failing to match any NFSv4 error code, which results in
nfs4_stat_to_errno() defaulting to returning -EREMOTEIO. This causes
assertions in upper layers due to -EREMOTEIO not being a valid NFSv4
error code.
Fix this by updating nfs_local_pgio_done() and nfs_local_commit_done()
to use the new nfs_localio_errno_to_nfs4_stat() to map a POSIX errno
to an NFSv4 error code.
Care was taken to factor out nfs4_errtbl_common[] to avoid duplicating
the same NFS error to errno table. nfs4_errtbl_common[] is checked
first by both nfs4_stat_to_errno and nfs_localio_errno_to_nfs4_stat
before they check their own more specialized tables (nfs4_errtbl[] and
nfs4_errtbl_localio[] respectively).
While auditing the associated error mapping tables, the (ab)use of -1
for the last table entry was removed in favor of using ARRAY_SIZE to
iterate the nfs_errtbl[] and nfs4_errtbl[]. And 'errno_NFSERR_IO' was
removed because it caused needless obfuscation.
Fixes: 70ba381e1a ("nfs: add LOCALIO support")
Reported-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee70999a98 ]
Patch series "nilfs2: fix issues with rename operations".
This series fixes BUG_ON check failures reported by syzbot around rename
operations, and a minor behavioral issue where the mtime of a child
directory changes when it is renamed instead of moved.
This patch (of 2):
The directory manipulation routines nilfs_set_link() and
nilfs_delete_entry() rewrite the directory entry in the folio/page
previously read by nilfs_find_entry(), so error handling is omitted on the
assumption that nilfs_prepare_chunk(), which prepares the buffer for
rewriting, will always succeed for these. And if an error is returned, it
triggers the legacy BUG_ON() checks in each routine.
This assumption is wrong, as proven by syzbot: the buffer layer called by
nilfs_prepare_chunk() may call nilfs_get_block() if necessary, which may
fail due to metadata corruption or other reasons. This has been there all
along, but improved sanity checks and error handling may have made it more
reproducible in fuzzing tests.
Fix this issue by adding missing error paths in nilfs_set_link(),
nilfs_delete_entry(), and their caller nilfs_rename().
Link: https://lkml.kernel.org/r/20250111143518.7901-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20250111143518.7901-2-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+32c3706ebf5d95046ea1@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=32c3706ebf5d95046ea1
Reported-by: syzbot+1097e95f134f37d9395c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1097e95f134f37d9395c
Fixes: 2ba466d74e ("nilfs2: directory entry operations")
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 367a9bffab ]
nilfs_lookup_dirty_data_buffers(), which iterates through the buffers
attached to dirty data folios/pages, accesses the attached buffers without
locking the folios/pages.
For data cache, nilfs_clear_folio_dirty() may be called asynchronously
when the file system degenerates to read only, so
nilfs_lookup_dirty_data_buffers() still has the potential to cause use
after free issues when buffers lose the protection of their dirty state
midway due to this asynchronous clearing and are unintentionally freed by
try_to_free_buffers().
Eliminate this race issue by adjusting the lock section in this function.
Link: https://lkml.kernel.org/r/20250107200202.6432-3-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Fixes: 8c26c4e269 ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca76bb226b ]
Patch series "nilfs2: protect busy buffer heads from being force-cleared".
This series fixes the buffer head state inconsistency issues reported by
syzbot that occurs when the filesystem is corrupted and falls back to
read-only, and the associated buffer head use-after-free issue.
This patch (of 2):
Syzbot has reported that after nilfs2 detects filesystem corruption and
falls back to read-only, inconsistencies in the buffer state may occur.
One of the inconsistencies is that when nilfs2 calls mark_buffer_dirty()
to set a data or metadata buffer as dirty, but it detects that the buffer
is not in the uptodate state:
WARNING: CPU: 0 PID: 6049 at fs/buffer.c:1177 mark_buffer_dirty+0x2e5/0x520
fs/buffer.c:1177
...
Call Trace:
<TASK>
nilfs_palloc_commit_alloc_entry+0x4b/0x160 fs/nilfs2/alloc.c:598
nilfs_ifile_create_inode+0x1dd/0x3a0 fs/nilfs2/ifile.c:73
nilfs_new_inode+0x254/0x830 fs/nilfs2/inode.c:344
nilfs_mkdir+0x10d/0x340 fs/nilfs2/namei.c:218
vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257
do_mkdirat+0x264/0x3a0 fs/namei.c:4280
__do_sys_mkdirat fs/namei.c:4295 [inline]
__se_sys_mkdirat fs/namei.c:4293 [inline]
__x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The other is when nilfs_btree_propagate(), which propagates the dirty
state to the ancestor nodes of a b-tree that point to a dirty buffer,
detects that the origin buffer is not dirty, even though it should be:
WARNING: CPU: 0 PID: 5245 at fs/nilfs2/btree.c:2089
nilfs_btree_propagate+0xc79/0xdf0 fs/nilfs2/btree.c:2089
...
Call Trace:
<TASK>
nilfs_bmap_propagate+0x75/0x120 fs/nilfs2/bmap.c:345
nilfs_collect_file_data+0x4d/0xd0 fs/nilfs2/segment.c:587
nilfs_segctor_apply_buffers+0x184/0x340 fs/nilfs2/segment.c:1006
nilfs_segctor_scan_file+0x28c/0xa50 fs/nilfs2/segment.c:1045
nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1216 [inline]
nilfs_segctor_collect fs/nilfs2/segment.c:1540 [inline]
nilfs_segctor_do_construct+0x1c28/0x6b90 fs/nilfs2/segment.c:2115
nilfs_segctor_construct+0x181/0x6b0 fs/nilfs2/segment.c:2479
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2587 [inline]
nilfs_segctor_thread+0x69e/0xe80 fs/nilfs2/segment.c:2701
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Both of these issues are caused by the callbacks that handle the
page/folio write requests, forcibly clear various states, including the
working state of the buffers they hold, at unexpected times when they
detect read-only fallback.
Fix these issues by checking if the buffer is referenced before clearing
the page/folio state, and skipping the clear if it is.
Link: https://lkml.kernel.org/r/20250107200202.6432-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20250107200202.6432-2-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+b2b14916b77acf8626d7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b2b14916b77acf8626d7
Reported-by: syzbot+d98fd19acd08b36ff422@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=d98fd19acd08b36ff422
Fixes: 8c26c4e269 ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Tested-by: syzbot+b2b14916b77acf8626d7@syzkaller.appspotmail.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 276c61385f ]
While running fstests generic/329, the kernel workqueue
quota_release_workfn is dead looping in calling ocfs2_release_dquot().
The ocfs2 state is already readonly but ocfs2_release_dquot wants to
start a transaction but fails and returns.
=====================================================================
[ 2918.123602 ][ T275 ] On-disk corruption discovered. Please run
fsck.ocfs2 once the filesystem is unmounted.
[ 2918.124034 ][ T275 ] (kworker/u135:1,275,11):ocfs2_release_dquot:765
ERROR: status = -30
[ 2918.124452 ][ T275 ] (kworker/u135:1,275,11):ocfs2_release_dquot:795
ERROR: status = -30
[ 2918.124883 ][ T275 ] (kworker/u135:1,275,11):ocfs2_start_trans:357
ERROR: status = -30
[ 2918.125276 ][ T275 ] OCFS2: abort (device dm-0): ocfs2_start_trans:
Detected aborted journal
[ 2918.125710 ][ T275 ] On-disk corruption discovered. Please run
fsck.ocfs2 once the filesystem is unmounted.
=====================================================================
ocfs2_release_dquot() is much like dquot_release(), which is called by
ext4 to handle similar situation. So here fix it by marking the dquot as
inactive like what dquot_release() does.
Link: https://lkml.kernel.org/r/20250106140653.92292-1-glass.su@suse.com
Fixes: 9e33d69f55 ("ocfs2: Implementation of local and global quota file handling")
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db902986de ]
z_erofs_shrink_scan() could return small numbers due to the mistyped
`freed`.
Although I don't think it has any visible impact.
Fixes: 3883a79abd ("staging: erofs: introduce VLE decompression support")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250114040058.459981-1-hsiangkao@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf1aa03980 ]
`struct erofs_workgroup` was introduced to provide a unique header
for all physically indexed objects. However, after big pclusters and
shared pclusters are implemented upstream, it seems that all EROFS
encoded data (which requires transformation) can be represented with
`struct z_erofs_pcluster` directly.
Move all members into `struct z_erofs_pcluster` for simplicity.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241021035323.3280682-3-hsiangkao@linux.alibaba.com
Stable-dep-of: db902986de ("erofs: fix potential return value overflow of z_erofs_shrink_scan()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b091e8ed24 ]
Just fold them into the only two callers since
they are simple enough.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241021035323.3280682-1-hsiangkao@linux.alibaba.com
Stable-dep-of: db902986de ("erofs: fix potential return value overflow of z_erofs_shrink_scan()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 015683d4ed ]
In all other places is used function cifs_autodisable_serverino() for
disabling CIFS_MOUNT_SERVER_INUM mount flag. So use is also in readir.c
_initiate_cifs_search() function. Benefit of cifs_autodisable_serverino()
is that it also prints dmesg message that server inode numbers are being
disabled.
Fixes: ec06aedd44 ("cifs: clean up handling when server doesn't consistently support inode numbers")
Fixes: f534dc9943 ("cifs: clear server inode number flag while autodisabling")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e30458d690 ]
Fix a pair of bugs in the fallback handling for the YFS.RemoveFile2 RPC
call:
(1) Fix the abort code check to also look for RXGEN_OPCODE. The lack of
this masks the second bug.
(2) call->server is now not used for ordinary filesystem RPC calls that
have an operation descriptor. Fix to use call->op->server instead.
Fixes: e49c7b2f6d ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/109541.1736865963@warthog.procyon.org.uk
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 344af27715 ]
While working on implementing user access validation on powerpc
I got the following warnings on a pmac32_defconfig build:
CC fs/select.o
fs/select.o: warning: objtool: sys_pselect6+0x1bc: redundant UACCESS disable
fs/select.o: warning: objtool: sys_pselect6_time32+0x1bc: redundant UACCESS disable
On powerpc/32s, user_read_access_begin/end() are no-ops, but the
failure path has a user_access_end() instead of user_read_access_end()
which means an access end without any prior access begin.
Replace that user_access_end() by user_read_access_end().
Fixes: 7e71609f64 ("pselect6() and friends: take handling the combined 6th/7th args into helper")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/a7139e28d767a13e667ee3c79599a8047222ef36.1736751221.git.christophe.leroy@csgroup.eu
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 396294d1af ]
We're dumping the locked bitmap into the @checked_bitmap variable,
printing incorrect values during debug.
Thankfully even during my development I haven't hit a case where I need
to dump the locked bitmap. But for the sake of consistency, fix it by
dupping the locked bitmap into @locked_bitmap variable for output.
Fixes: 75258f20fb ("btrfs: subpage: dump extra subpage bitmaps for debug")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0def46dec ]
[WARNING]
There are several warnings about the recently introduced qgroup
auto-removal that it triggers WARN_ON() for the non-zero rfer/excl
numbers, e.g:
------------[ cut here ]------------
WARNING: CPU: 67 PID: 2882 at fs/btrfs/qgroup.c:1854 btrfs_remove_qgroup+0x3df/0x450
CPU: 67 UID: 0 PID: 2882 Comm: btrfs-cleaner Kdump: loaded Not tainted 6.11.6-300.fc41.x86_64 #1
RIP: 0010:btrfs_remove_qgroup+0x3df/0x450
Call Trace:
<TASK>
btrfs_qgroup_cleanup_dropped_subvolume+0x97/0xc0
btrfs_drop_snapshot+0x44e/0xa80
btrfs_clean_one_deleted_snapshot+0xc3/0x110
cleaner_kthread+0xd8/0x130
kthread+0xd2/0x100
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
BTRFS warning (device sda): to be deleted qgroup 0/319 has non-zero numbers, rfer 258478080 rfer_cmpr 258478080 excl 0 excl_cmpr 0
[CAUSE]
Although the root cause is still unclear, as if qgroup is consistent a
fully dropped subvolume (with extra transaction committed) should lead
to all zero numbers for the qgroup.
My current guess is the subvolume drop triggered the new subtree drop
threshold thus marked qgroup inconsistent, then rescan cleared it but
some corner case is not properly handled during subvolume dropping.
But at least for this particular case, since it's only the rfer/excl not
properly reset to 0, and qgroup is already marked inconsistent, there is
nothing to be worried for the end users.
The user space tool utilizing qgroup would queue a rescan to handle
everything, so the kernel wanring is a little overkilled.
[ENHANCEMENT]
Enhance the warning inside btrfs_remove_qgroup() by:
- Only do WARN() if CONFIG_BTRFS_DEBUG is enabled
As explained the kernel can handle inconsistent qgroups by simply do a
rescan, there is nothing to bother the end users.
- Treat the reserved space leak the same as non-zero numbers
By outputting the values and trigger a WARN() if it's a debug build.
So far I haven't experienced any case related to reserved space so I
hope we will never need to bother them.
Fixes: 839d6ea4f8 ("btrfs: automatically remove the subvolume qgroup")
Link: https://github.com/kdave/btrfs-progs/issues/922
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d727935cad ]
Use proc_douintvec_minmax() instead of proc_dointvec_minmax() to handle
sysctl_nr_open, because its data type is unsigned int, not int.
Fixes: 9b80a184ea ("fs/file: more unsigned file descriptors")
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Link: https://lore.kernel.org/r/20241124034636.325337-1-alexjlzheng@tencent.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9750be93b2 ]
If we manage to begin an async call, but fail to transmit any data on it
due to a signal, we then abort it which causes a race between the
notification of call completion from rxrpc and our attempt to cancel the
notification. The notification will be necessary, however, for async
FetchData to terminate the netfs subrequest.
However, since we get a notification from rxrpc upon completion of a call
(aborted or otherwise), we can just leave it to that.
This leads to calls not getting cleaned up, but appearing in
/proc/net/rxrpc/calls as being aborted with code 6.
Fix this by making the "error_do_abort:" case of afs_make_call() abort the
call and then abandon it to the notification handler.
Fixes: 34fa47612b ("afs: Fix race in async call refcounting")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-25-dhowells@redhat.com
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07a1076785 ]
The AFS directory format structure, union afs_xdr_dir_block::meta, has too
many alloc counter slots declared and so pushes the hash table along and
over the data. This doesn't cause a problem at the moment because I'm
currently ignoring the hash table and only using the correct number of
alloc_ctrs in the code anyway. In future, however, I should start using
the hash table to try and speed up afs_lookup().
Fix this by using the correct constant to declare the counter array.
Fixes: 4ea219a839 ("afs: Split the directory content defs into a header")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-14-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b49194da2a ]
AFS servers pass back a code indicating EEXIST when they're asked to remove
a directory that is not empty rather than ENOTEMPTY because not all the
systems that an AFS server can run on have the latter error available and
AFS preexisted the addition of that error in general.
Fix afs_rmdir() to translate EEXIST to ENOTEMPTY.
Fixes: 260a980317 ("[AFS]: Add "directory write" support.")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-13-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57cdd1a1cf ]
The return type of srcu_read_lock() is int and not bool. Whereas we
using the ret variable only to evaluate a bool type of
dlm_lowcomms_con_has_addr() to check if an address is already being set.
Fixes: 6f0b0b5d7a ("fs: dlm: remove dlm_node_addrs lookup list")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 134129520b ]
An rsb struct was not being removed in the case where it
was both the master and the dir record. This case (master
and dir node) was missed in the condition for doing add_scan()
from deactivate_rsb(). Fixing this triggers a related WARN_ON
that needs to be fixed, and requires adjusting where two
del_scan() calls are made.
Fixes: c217adfc8c ("dlm: fix add_scan and del_scan usage")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3681c74d34 upstream.
If the server doesn't support both EAs and reparse point in a file,
the SMB2_QUERY_INFO request will fail with either
STATUS_NO_EAS_ON_FILE or STATUS_EAS_NOT_SUPPORT in the compound chain,
so ignore it as long as reparse point isn't
IO_REPARSE_TAG_LX_(CHR|BLK), which would require the EAs to know about
major/minor numbers.
Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9b588f22a upstream.
The mtree mechanism has been effective at creating directory offsets
that are stable over multiple opendir instances. However, it has not
been able to handle the subtleties of renames that are concurrent
with readdir.
Instead of using the mtree to emit entries in the order of their
offset values, use it only to map incoming ctx->pos to a starting
entry. Then use the directory's d_children list, which is already
maintained properly by the dcache, to find the next child to emit.
One of the sneaky things about this is that when the mtree-allocated
offset value wraps (which is very rare), looking up ctx->pos++ is
not going to find the next entry; it will return NULL. Instead, by
following the d_children list, the offset values can appear in any
order but all of the entries in the directory will be visited
eventually.
Note also that the readdir() is guaranteed to reach the tail of this
list. Entries are added only at the head of d_children, and readdir
walks from its current position in that list towards its tail.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20241228175522.1854234-6-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68a3a65003 upstream.
According to getdents(3), the d_off field in each returned directory
entry points to the next entry in the directory. The d_off field in
the last returned entry in the readdir buffer must contain a valid
offset value, but if it points to an actual directory entry, then
readdir/getdents can loop.
This patch introduces a specific fixed offset value that is placed
in the d_off field of the last entry in a directory. Some user space
applications assume that the EOD offset value is larger than the
offsets of real directory entries, so the largest valid offset value
is reserved for this purpose. This new value is never allocated by
simple_offset_add().
When ->iterate_dir() returns, getdents{64} inserts the ctx->pos
value into the d_off field of the last valid entry in the readdir
buffer. When it hits EOD, offset_readdir() sets ctx->pos to the EOD
offset value so the last entry is updated to point to the EOD marker.
When trying to read the entry at the EOD offset, offset_readdir()
terminates immediately.
It is worth noting that using a Maple tree for directory offset
value allocation does not guarantee a 63-bit range of values --
on platforms where "long" is a 32-bit type, the directory offset
value range is still 0..(2^31 - 1). For broad compatibility with
32-bit user space, the largest tmpfs directory cookie value is now
S32_MAX.
Fixes: 796432efab ("libfs: getdents() should return 0 after reaching EOD")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20241228175522.1854234-5-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b662d85813 upstream.
The current directory offset allocator (based on mtree_alloc_cyclic)
stores the next offset value to return in octx->next_offset. This
mechanism typically returns values that increase monotonically over
time. Eventually, though, the newly allocated offset value wraps
back to a low number (say, 2) which is smaller than other already-
allocated offset values.
Yu Kuai <yukuai3@huawei.com> reports that, after commit 64a7ce76fb
("libfs: fix infinite directory reads for offset dir"), if a
directory's offset allocator wraps, existing entries are no longer
visible via readdir/getdents because offset_readdir() stops listing
entries once an entry's offset is larger than octx->next_offset.
These entries vanish persistently -- they can be looked up, but will
never again appear in readdir(3) output.
The reason for this is that the commit treats directory offsets as
monotonically increasing integer values rather than opaque cookies,
and introduces this comparison:
if (dentry2offset(dentry) >= last_index) {
On 64-bit platforms, the directory offset value upper bound is
2^63 - 1. Directory offsets will monotonically increase for millions
of years without wrapping.
On 32-bit platforms, however, LONG_MAX is 2^31 - 1. The allocator
can wrap after only a few weeks (at worst).
Revert commit 64a7ce76fb ("libfs: fix infinite directory reads for
offset dir") to prepare for a fix that can work properly on 32-bit
systems and might apply to recent LTS kernels where shmem employs
the simple_offset mechanism.
Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20241228175522.1854234-4-cel@kernel.org
Reviewed-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d7bde4f27c upstream.
simple_empty() and simple_offset_empty() perform the same task.
The latter's use as a canary to find bugs has not found any new
issues. A subsequent patch will remove the use of the mtree for
iterating directory contents, so revert back to using a similar
mechanism for determining whether a directory is indeed empty.
Only one such mechanism is ever needed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20241228175522.1854234-3-cel@kernel.org
Reviewed-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 903dc9c43a upstream.
Testing shows that the EBUSY error return from mtree_alloc_cyclic()
leaks into user space. The ERRORS section of "man creat(2)" says:
> EBUSY O_EXCL was specified in flags and pathname refers
> to a block device that is in use by the system
> (e.g., it is mounted).
ENOSPC is closer to what applications expect in this situation.
Note that the normal range of simple directory offset values is
2..2^63, so hitting this error is going to be rare to impossible.
Fixes: 6faddda69f ("libfs: Add directory operations for stable offsets")
Cc: stable@vger.kernel.org # v6.9+
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20241228175522.1854234-2-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c9d922380 upstream.
Truncate an inode's address space when flipping the GFS2_DIF_JDATA flag:
depending on that flag, the pages in the address space will either use
buffer heads or iomap_folio_state structs, and we cannot mix the two.
Reported-by: Kun Hu <huk23@m.fudan.edu.cn>, Jiaji Qin <jjtan24@m.fudan.edu.cn>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cbc5dde0a4 upstream.
Since commit 5cbcb62ddd ("fs/proc: fix softlockup in __read_vmcore") the
number of softlockups in __read_vmcore at kdump time have gone down, but
they still happen sometimes.
In a memory constrained environment like the kdump image, a softlockup is
not just a harmless message, but it can interfere with things like RCU
freeing memory, causing the crashdump to get stuck.
The second loop in __read_vmcore has a lot more opportunities for natural
sleep points, like scheduling out while waiting for a data write to
happen, but apparently that is not always enough.
Add a cond_resched() to the second loop in __read_vmcore to (hopefully)
get rid of the softlockups.
Link: https://lkml.kernel.org/r/20250110102821.2a37581b@fangorn
Fixes: 5cbcb62ddd ("fs/proc: fix softlockup in __read_vmcore")
Signed-off-by: Rik van Riel <riel@surriel.com>
Reported-by: Breno Leitao <leitao@debian.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 17a4fde81d ]
syzbot reported a lock held when returning to userspace[1]. This is
because if argc is less than 0 and the function returns directly, the held
inode lock is not released.
Fix this by store the error in ret and jump to done to clean up instead of
returning directly.
[dh: Modified Lizhi Xu's original patch to make it honour the error code
from afs_split_string()]
[1]
WARNING: lock held when returning to user space!
6.13.0-rc3-syzkaller-00209-g499551201b5f #0 Not tainted
------------------------------------------------
syz-executor133/5823 is leaving the kernel with locks still held!
1 lock held by syz-executor133/5823:
#0: ffff888071cffc00 (&sb->s_type->i_mutex_key#9){++++}-{4:4}, at: inode_lock include/linux/fs.h:818 [inline]
#0: ffff888071cffc00 (&sb->s_type->i_mutex_key#9){++++}-{4:4}, at: afs_proc_addr_prefs_write+0x2bb/0x14e0 fs/afs/addr_prefs.c:388
Reported-by: syzbot+76f33569875eb708e575@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=76f33569875eb708e575
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241226012616.2348907-1-lizhi.xu@windriver.com/
Link: https://lore.kernel.org/r/529850.1736261552@warthog.procyon.org.uk
Tested-by: syzbot+76f33569875eb708e575@syzkaller.appspotmail.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c13094b894 ]
on 32-bit kernels, iomap_write_delalloc_scan() was inadvertently using a
32-bit position due to folio_next_index() returning an unsigned long.
This could lead to an infinite loop when writing to an xfs filesystem.
Signed-off-by: Marco Nelissen <marco.nelissen@gmail.com>
Link: https://lore.kernel.org/r/20250109041253.2494374-1-marco.nelissen@gmail.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5a8b6446c ]
Instead of storing an opaque string, call security_secctx_to_secid()
right in the "secctx" command handler and store only the numeric
"secid". This eliminates an unnecessary string allocation and allows
the daemon to receive errors when writing the "secctx" command instead
of postponing the error to the "bind" command handler. For example,
if the kernel was built without `CONFIG_SECURITY`, "bind" will return
`EOPNOTSUPP`, but the daemon doesn't know why. With this patch, the
"secctx" will instead return `EOPNOTSUPP` which is the right context
for this error.
This patch adds a boolean flag `have_secid` because I'm not sure if we
can safely assume that zero is the special secid value for "not set".
This appears to be true for SELinux, Smack and AppArmor, but since
this attribute is not documented, I'm unable to derive a stable
guarantee for that.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241209141554.638708-1-max.kellermann@ionos.com/
Link: https://lore.kernel.org/r/20241213135013.2964079-6-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8b90d40d5 ]
When a read subrequest finishes, if it doesn't have sufficient coverage to
complete the folio(s) covering either side of it, it will donate the excess
coverage to the adjacent subrequests on either side, offloading
responsibility for unlocking the folio(s) covered to them.
Now, preference is given to donating down to a lower file offset over
donating up because that check is done first - but there's no check that
the lower subreq is actually contiguous, and so we can end up donating
incorrectly.
The scenario seen[1] is that an 8MiB readahead request spanning four 2MiB
folios is split into eight 1MiB subreqs (numbered 1 through 8). These
terminate in the order 1,6,2,5,3,7,4,8. What happens is:
- 1 donates to 2
- 6 donates to 5
- 2 completes, unlocking the first folio (with 1).
- 5 completes, unlocking the third folio (with 6).
- 3 donates to 4
- 7 donates to 4 incorrectly
- 4 completes, unlocking the second folio (with 3), but can't use
the excess from 7.
- 8 donates to 4, also incorrectly.
Fix this by preventing downward donation if the subreqs are not contiguous
(in the example above, 7 donates to 4 across the gap left by 5 and 6).
Reported-by: Shyam Prasad N <nspmangalore@gmail.com>
Closes: https://lore.kernel.org/r/CANT5p=qBwjBm-D8soFVVtswGEfmMtQXVW83=TNfUtvyHeFQZBA@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/526707.1733224486@warthog.procyon.org.uk/ [1]
Link: https://lore.kernel.org/r/20241213135013.2964079-3-dhowells@redhat.com
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b2fc0be98 ]
fs/file.c should include include/linux/init_task.h for
declaration of init_files. This fixes the sparse warning:
fs/file.c:501:21: warning: symbol 'init_files' was not declared. Should it be static?
Signed-off-by: Zhang Kunbo <zhangkunbo@huawei.com>
Link: https://lore.kernel.org/r/20241217071836.2634868-1-zhangkunbo@huawei.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 989e0cdc0f ]
qnx6_checkroot() had been using weirdly spelled initializer - it needed
to initialize 3-element arrays of char and it used NUL-padded
3-character string literals (i.e. 4-element initializers, with
completely pointless zeroes at the end).
That had been spotted by gcc-15[*]; prior to that gcc quietly dropped
the 4th element of initializers.
However, none of that had been needed in the first place - all this
array is used for is checking that the first directory entry in root
directory is "." and the second - "..". The check had been expressed as
a loop, using that match_root[] array. Since there is no chance that we
ever want to extend that list of entries, the entire thing is much too
fancy for its own good; what we need is just a couple of explicit
memcmp() and that's it.
[*]: fs/qnx6/inode.c: In function ‘qnx6_checkroot’:
fs/qnx6/inode.c:182:41: error: initializer-string for array of ‘char’ is too long [-Werror=unterminated-string-initialization]
182 | static char match_root[2][3] = {".\0\0", "..\0"};
| ^~~~~~~
fs/qnx6/inode.c:182:50: error: initializer-string for array of ‘char’ is too long [-Werror=unterminated-string-initialization]
182 | static char match_root[2][3] = {".\0\0", "..\0"};
| ^~~~~~
Signed-off-by: Brahmajit Das <brahmajit.xyz@gmail.com>
Link: https://lore.kernel.org/r/20241004195132.1393968-1-brahmajit.xyz@gmail.com
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b905bafdea ]
In the syzbot reproducer, the hfs_cat_rec for the root dir has type
HFS_CDR_FIL after being read with hfs_bnode_read() in hfs_super_fill().
This indicates it should be used as an hfs_cat_file, which is 102 bytes.
Only the first 70 bytes of that struct are initialized, however,
because the entrylength passed into hfs_bnode_read() is still the length of
a directory record. This causes uninitialized values to be used later on,
when the hfs_cat_rec union is treated as the larger hfs_cat_file struct.
Add a check to make sure the retrieved record has the correct type
for the root directory (HFS_CDR_DIR), and make sure we load the correct
number of bytes for a directory record.
Reported-by: syzbot+2db3c7526ba68f4ea776@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2db3c7526ba68f4ea776
Tested-by: syzbot+2db3c7526ba68f4ea776@syzkaller.appspotmail.com
Tested-by: Leo Stone <leocstone@gmail.com>
Signed-off-by: Leo Stone <leocstone@gmail.com>
Link: https://lore.kernel.org/r/20241201051420.77858-1-leocstone@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe4de594f7 ]
Inside function get_canonical_dev_path(), we call d_path() to get the
final device path.
But d_path() can return error, and in that case the next strscpy() call
will trigger an invalid memory access.
Add back the missing error handling for d_path().
Reported-by: Boris Burkov <boris@bur.io>
Fixes: 7e06de7c83 ("btrfs: canonicalize the device path before adding it")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
