commit 26ea2459d1 upstream.
The Voltorb device uses a speaker codec different from the original
Corsola device. When the Voltorb device tree was first added, the new
codec was added as a separate node when it should have just replaced the
existing one.
Merge the two nodes. The only differences are the compatible string and
the GPIO line property name. This keeps the device node path for the
speaker codec the same across the MT8186 Chromebook line. Also rename
the related labels and node names from having rt1019p to speaker codec.
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241018082113.1297268-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5df3068441 ]
Comply with bindings guidelines and get rid of errors such as:
cpufreq@18323000: compatible: 'oneOf' conditional failed, one must be fixed:
['qcom,cpufreq-hw'] is too short
Fixes: 8575f197b0 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42d8555752 ]
Correct the audio name for the Indiedroid Nova from
rockchip,es8388-codec to rockchip,es8388. This name change corrects a
kernel log error of "ASoC: driver name too long 'rockchip,es8388-codec'
-> 'rockchip_es8388'".
Fixes: 3900160e16 ("arm64: dts: rockchip: Add Indiedroid Nova board")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20241031150505.967909-2-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaecb1da58 ]
When the fixed regulators for the LCD panel and DP bridge were added,
their supplies were not modeled in. These, except for the 1.0V supply,
are just load switches, and need and have a supply.
Add the supplies for each of the fixed regulators.
Fixes: cabc71b08e ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241030070224.1006331-4-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4e8cf13f1 ]
Some of the regulator supplies for the MIPI-DPI-to-DP bridge and their
associated nodes are incorrectly named. In particular, the 1.0V supply
was modeled as a 1.2V supply.
Fix all the incorrect names, and also fix the voltage of the 1.0V
regulator.
Fixes: cabc71b08e ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241030070224.1006331-3-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76ab2ae0ab ]
Fix DTBS check errors for 'mt6358codec' and 'mt6358regulator':
Error message is:
pmic: 'mt6358codec' and 'mt6358regulator' does not match any of the
regexes: 'pinctrl-[0-9]+'.
Rename these two device node to generic 'audio-codec' and 'regulators'.
Fixes: 9f88722216 ("arm64: dts: mt6358: add PMIC MT6358 related nodes")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20241029064647.13370-1-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c771d311b1 ]
Fix the issue where both 'output-low' and 'output-high' exist under GPIO
hog nodes (rst_usb_hub_hog and sel_usb_hub_hog) when applying device
tree overlays. Since /delete-property/ is not supported in the overlays,
setting 'output-low' results in both properties being present. The
workaround is to disable these hogs and create new ones with 'output-low'
as needed.
Fix below CHECK_DTBS warning:
arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtb: sel-usb-hub-hog:
{'output-low': True, 'gpio-hog': True, 'gpios': [[1, 0]], 'output-high': True, 'phandle': 108, '$nodename': ['sel-usb-hub-hog']}
is valid under each of {'required': ['output-low']}, {'required': ['output-high']
Fixes: 3f6fc30abe ("arm64: dts: imx8mn: tqma8mqnl-mba8mx: Add USB DR overlay")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cc926e3fa ]
"#sound-dai-cells" is required if the board is using "simple-card".
However, the HiHope board uses "audio-graph", thus remove the unneeded
`#sound-dai-cells`.
Commit 9e72606cd2 ("arm64: dts: renesas: #sound-dai-cells is used when
simple-card") updated the comment regarding usage of "#sound-dai-cells"
in the SoC DTSI but missed to remove "#sound-dai-cells" from board DTS
files.
Fixes: 9e72606cd2 ("arm64: dts: renesas: #sound-dai-cells is used when simple-card")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/20241010135332.710648-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e65616ef0 ]
Update the numbers based on the information found in the DSDT.
Fixes: af16b00578 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240716-topic-h_bits-v1-2-f6c5d3ff982c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a47e38167 ]
The clock IDs for multiple MCSPI instances across wakeup as
well as main domain in J7200 are incorrect when compared with
documentation [1]. This results in kernel crashes when the said
instances are enabled. Fix the clock ids to their appropriate
values.
[1]https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j7200/clocks.html
Fixes: 8f6c475f4c ("arm64: dts: ti: k3-j7200: Add MCSPI nodes")
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
Link: https://lore.kernel.org/r/20241023104532.3438851-2-a-dutta@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7af8b4acb ]
Commit 0d0a0b4413 ("arm64: dts: ti: k3-j7200: fix main pinmux
range") split the main_pmx0 into two nodes: main_pmx0 and main_pmx1
due to a non-addressable region, but incorrectly represented the
ranges. As a result, the memory map for the pinctrl is incorrect. Fix
this by introducing the correct ranges.
The ranges are taken from the J7200 TRM [1] (Table 5-695. CTRL_MMR0
Registers).
Padconfig starting addresses and ranges:
- 0 to 66: 0x11c000, 0x10c
- 68: 0x11c110, 0x004
- 71 to 73: 0x11c11c, 0x00c
- 89 to 90: 0x11c164, 0x008
The datasheet [2] doesn't contain PADCONFIG63 (Table 6-106. Pin
Multiplexing), but the pin is necessary for enabling the MMC1 CLKLP
pad loopback and should be included in the pinmux register map.
Due to the change in pinmux node addresses, change the pinmux node for
the USB0_DRVVBUS pin to main_pmx2. The offset has not changed since the
new main_pmx2 node has the same base address and range as the original
main_pmx1 node. All other pinmuxing done within J7200 dts or dtso files
only uses main_pmx0 which has not changed.
[1] https://www.ti.com/lit/pdf/spruiu1
[2] https://www.ti.com/lit/gpn/dra821u
Fixes: 0d0a0b4413 ("arm64: dts: ti: k3-j7200: fix main pinmux range")
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Jared McArthur <j-mcarthur@ti.com>
Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20240926102533.398139-1-a-limaye@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a9d7e6596 ]
The 'enable-active-low' property is not a valid, because it is the
default behaviour of the fixed regulator.
Only 'enable-active-high' is valid, and when this property is absent
the fixed regulator will act as active low by default.
Both the rk3588-orange-pi-5 and the Wolfvision pf5 io expander overlay
smuggled those enable-active-low properties in, so remove them to
make dtbscheck happier.
Fixes: 28799a7734 ("arm64: dts: rockchip: add wolfvision pf5 io expander board")
Cc: Michael Riesch <michael.riesch@wolfvision.net>
Fixes: b6bc755d80 ("arm64: dts: rockchip: Add Orange Pi 5")
Cc: Muhammed Efe Cetin <efectn@6tel.net>
Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241008203940.2573684-10-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e57d3dc7b ]
The dtschema requires to specify common ancestor which all SDIO chips are
derived from, so add accordingly.
Fixes: a50d5dcd28 ("arm64: tegra: Wire up WiFi on Jetson TX1 module")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409030438.8tumAnp1-lkp@intel.com
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d5794e6d9 ]
The RT5682i and RT5682s drivers describe two DAIs: AIF1 supports both
playback and capture, while AIF2 supports capture only.
Cherry doesn't specify which DAI to use. Although this doesn't cause
real issues because AIF1 happens to be the first DAI, it should be
corrected:
codec@1a: #sound-dai-cells: 1 was expected
Update #sound-dai-cells to 1 and adjust DAI link usages accordingly.
Fixes: 87728e3ccf ("arm64: dts: mediatek: mt8195-cherry: Specify sound DAI links and routing")
Signed-off-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20241021114318.1358681-1-fshao@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bb64877a4 ]
The T-PHY controller at 0x11e40000 controls two underlying USB2 and USB3
PHY ports. The USB3 port works normally just like the others, so there's
no point in disabling it separately. Otherwise, board DTs would have to
enable both the T-PHY controller and one of its sub-nodes in particular,
which is slightly redundant and confusing.
Remove the status line in the u3port1 node, so it's ready to be used
once the T-PHY controller is enabled.
Fixes: 9461e0caac ("arm64: dts: Add MediaTek MT8188 dts and evaluation board and Makefile")
Signed-off-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20241021081311.543625-1-fshao@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f766fae08f ]
The Hana device has a second source option trackpad, but it is missing
its regulator supply. It only works because the regulator is marked as
always-on.
Add the regulator supply, but leave out the post-power-on delay. Instead,
document the post-power-on delay along with the reason for not adding
it in a comment.
Fixes: 689b937bed ("arm64: dts: mediatek: add mt8173 elm and hana board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241018082001.1296963-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c33a0a02a2 ]
Drop the McASP AFIFOs for better audio latency. This adds back a
change that was lost while refactoring the device tree.
Fixes: 554dd562a5 ("arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Drop McASP AFIFOs")
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20241002224754.2917895-1-nmorrisson@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ed1a2b878 ]
Resize the GICR register region as it currently seeps into the CPU Control
Processor mailbox RX region.
Fixes: af16b00578 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20240612124056.39230-4-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dd7d9d41d ]
L10A, being a fixed regulator, should have min_voltage = max_voltage,
otherwise fixed rulator fails to probe. Fix the max_voltage range to be
equal to minimum.
Fixes: 4edbcf264f ("arm64: dts: qcom: sda660-ifc6560: document missing USB PHY supplies")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240907-sdm660-wifi-v1-4-e316055142f8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 377548f05b ]
Commit 009d855a26 ("arm64: dts: mt8183: add dpi node to mt8183") adds
a device-tree node for the DPI display interface that feeds the external
display pipeline, to enable HDMI support on the Pumpkin board.
However, the external display is not fully described on Chrome devices,
blocked by further work on DP / USB-C muxing graph bindings. This
incomplete description currently breaks internal display at least on the
Cozmo board. The same issue was found and fixed on MT8186 devices with
commit 3079fb09dd ("arm64: dts: mediatek: mt8186-corsola: Disable DPI
display interface"), but the MT8183 change wasn't merged until then.
Disable the external display interface for the Kukui device family until
the necessary work is done, like in the MT8186 Corsola case.
Fixes: 009d855a26 ("arm64: dts: mt8183: add dpi node to mt8183")
Link: https://lore.kernel.org/linux-mediatek/20240821042836.2631815-1-wenst@chromium.org/
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240916162956.267340-1-alpernebiyasak@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c14ab45f5d ]
The infracfg_ao node in mt8195.dtsi was causing a dtbs_check error.
The error message was:
syscon@10001000: compatible: ['mediatek,mt8195-infracfg_ao', 'syscon',
'simple-mfd'] is too long
To resolve this, remove 'simple-mfd' from the 'compatible' property of the
infracfg_ao node.
Fixes: 37f2582883 ("arm64: dts: Add mediatek SoC mt8195 and evaluation board")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241002051620.2050-1-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fc557b539 ]
The mutex node in mt8195.dtsi was triggering a dtbs_check error:
mutex@1c101000: 'clock-names', 'reg-names' do not match any of the
regexes: 'pinctrl-[0-9]+'
This seems no need by inspecting the DT schemas and other reference boards,
so drop 'clock-names' and 'reg-names' in mt8195.dtsi.
Fixes: 92d2c23dc2 ("arm64: dts: mt8195: add display node for vdosys1")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241002051620.2050-4-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 752804acea ]
The ethernet-phy node in mt8395-genio-1200-evk.dts was triggering a
dtbs_check error. The error message was:
eth-phy0@1: $nodename:0: 'eth-phy0@1' does not match
'^ethernet-phy(@[a-f0-9]+)?$'
Fix this issue by replacing 'eth-phy' node to generic 'ethernet-phy'.
Fixes: f2b543a191 ("arm64: dts: mediatek: add device-tree for Genio 1200 EVK board")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241002051620.2050-3-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4007651c25 ]
The clock index "CLK_APMIXED_MFGPLL" belongs to the "apmixedsys" provider,
so fix the index.
In addition, add a "mfg1" label so following commits could set
domain-supply for MFG1 power domain.
Fixes: eaf73e4224 ("arm64: dts: mediatek: mt8188: Add support for SoC power domains")
Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241002022138.29241-2-pablo.sun@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6317aad0e1 ]
Newer boards should always use squashed MBN firmware instead of split
MDT+bNN. Use qcom/qcs6490/modem.mbn as the firmware for the modem on
RB3gen2.
Fixes: ac6d35b9b7 ("arm64: dts: qcom: qcs6490-rb3gen2: Enable various remoteprocs")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240907-rb3g2-fixes-v1-1-eb9da98e9f80@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bring a range of PCIe fixes across the X Elite platform, as well as
marking the NVMe power supply boot-on to avoid glitching the power
supply during boot.
The X Elite CRD audio configuration sees a spelling mistake corrected.
On SM8450 the PCIe 1 PIPE clock definition is corrected, to fix a
regression where this isn't able to acquire it's clocks.
-----BEGIN PGP SIGNATURE-----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=gD69
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=1j8j
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-6.12-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into HEAD
More Qualcomm Arm64 DeviceTree fixes for v6.12
Bring a range of PCIe fixes across the X Elite platform, as well as
marking the NVMe power supply boot-on to avoid glitching the power
supply during boot.
The X Elite CRD audio configuration sees a spelling mistake corrected.
On SM8450 the PCIe 1 PIPE clock definition is corrected, to fix a
regression where this isn't able to acquire it's clocks.
* tag 'qcom-arm64-fixes-for-6.12-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: x1e80100: fix PCIe5 interconnect
arm64: dts: qcom: x1e80100: fix PCIe4 interconnect
arm64: dts: qcom: x1e80100: Fix up BAR spaces
arm64: dts: qcom: x1e80100-qcp: fix nvme regulator boot glitch
arm64: dts: qcom: x1e80100-microsoft-romulus: fix nvme regulator boot glitch
arm64: dts: qcom: x1e80100-yoga-slim7x: fix nvme regulator boot glitch
arm64: dts: qcom: x1e80100-vivobook-s15: fix nvme regulator boot glitch
arm64: dts: qcom: x1e80100-crd: fix nvme regulator boot glitch
arm64: dts: qcom: x1e78100-t14s: fix nvme regulator boot glitch
arm64: dts: qcom: x1e80100-crd Rename "Twitter" to "Tweeter"
arm64: dts: qcom: x1e80100: Fix PCIe 6a lanes description
arm64: dts: qcom: sm8450 fix PIPE clock specification for pcie1
arm64: dts: qcom: x1e80100: Add Broadcast_AND region in LLCC block
arm64: dts: qcom: x1e80100: fix PCIe5 PHY clocks
arm64: dts: qcom: x1e80100: fix PCIe4 and PCIe6a PHY clocks
Link: https://lore.kernel.org/r/20241101143206.738617-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This reverts the conversion to use the mailbox binding for RPM IPC
interrupts, as this broke boot on msm8939.
-----BEGIN PGP SIGNATURE-----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=89/8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+1Nf
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into HEAD
Qualcomm Arm64 DeviceTree fix for v6.12
This reverts the conversion to use the mailbox binding for RPM IPC
interrupts, as this broke boot on msm8939.
* tag 'qcom-arm64-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: msm8939: revert use of APCS mbox for RPM
Link: https://lore.kernel.org/r/20241101142414.737828-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- An imx8qm change from Alexander Stein to fix VPU IRQs
- An imx8 LVDS subsystem change from Diogo Silva to fix clock-output-names
- An imx8ulp change from Haibo Chen to correct flexspi compatible string
- An imx8mp-skov board change from Liu Ying to set correct clock rate
for media_isp
- An imx8mp-phyboard change from Marek Vasut to correct Video PLL1 frequency
- An imx8mp change from Peng Fan to correct SDHC IPG clock
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmcYaE8UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM46tggAtubWwAP3+7bR7RlMXzTR9Ram/zxV
6bARDnS29WxBIR1iDUPtDm8qyM2wt/2AUrc2ptRCWcVQVk49ihbsNfxL4+Rh5iuX
CGsq0fQ26CxHg0RS/49M8jlki+GONp99zsuoCbmwNxgZAx6nq8zWVv+4ho2Mtabf
YOJmOyEO9W09NQOVX8entHnDWH2Bap4WoFtG3GpsZmbgo7n9kgajAD7nWJ88kQ6Q
CYhDRx/W9Qw2IL2+vHiWpGFi1R0vxxmoTQFiwjcvVt37OsSQo7P5NvKyGVCIVBNJ
qa3fOO3K4VU+V6QASea3ea0HYCafwgHNpjOLUtr07jFP2PSrChTYuTRdFg==
=mM6I
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmck27wACgkQYKtH/8kJ
UifZAxAA5ImglcarJpQHhaBLEumVRIQa5x5Jvip6bOYIqlXjVqgavJL1DTJF+k6U
BC+3X8Wii8Sg9EVkSdBtR7o+td24TyZXe424UEMuuIO2QwLJ6XxyubL97g92+zYD
czlDzyKCSDV7IN/E3uslmkowFpU3eWOJKvSfW1mNvgRB1i+SSbLxMaqpeVxRFnR6
Toq1o+2Hk6IoquwrCgyp0Pf9Qa7tTl5b4sy85FtPcaIO2Nxo/nabupEoFl16Kml0
I1RLeLWpmNMTTEsEZWXRal3nUjqk+ay9XL37SA+pAvPZQOVmu/wUp2UoNaRLvvea
/ymAz9ReZhgUbK/nwWjt0bB2XnB0aoTLhQRpIzq97AAuKDhRegYVhD3TjNebURSJ
5Qveh9XHYMydL38Wxm8HZqxVZMNJXJj0M9IWWEBb1ke5INdoXGn4PA6srdL7ekwA
On4ylrqaeO2VJUpK3sl9iQxVIv9VnnaqE+DmpEZ63vT6Ak5utLaIo6zwD4X24xu/
p6dF7H2Dg6MHM012m4QvJLJKBIlU+sgnl4iwY1PT58yYDm9pz02/0+B0hgH7x69z
gPUX6P7K9ua+sqLHQ6bKcoKz0dWrEd8OuHoI/87oZqbNqd1Ki7bJVWREWGbaVSdj
lUjNTPEM1WjHJx4PhnZATA8j7f4M0qwevCaw68dbdFmlEbEKUW0=
=FtdG
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into HEAD
i.MX fixes for 6.12:
- An imx8qm change from Alexander Stein to fix VPU IRQs
- An imx8 LVDS subsystem change from Diogo Silva to fix clock-output-names
- An imx8ulp change from Haibo Chen to correct flexspi compatible string
- An imx8mp-skov board change from Liu Ying to set correct clock rate
for media_isp
- An imx8mp-phyboard change from Marek Vasut to correct Video PLL1 frequency
- An imx8mp change from Peng Fan to correct SDHC IPG clock
* tag 'imx-fixes-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mp-phyboard-pollux: Set Video PLL1 frequency to 506.8 MHz
arm64: dts: imx8mp: correct sdhc ipg clk
arm64: dts: imx8mp-skov-revb-mi1010ait-1cp1: Assign "media_isp" clock rate
arm64: dts: imx8: Fix lvds0 device tree
arm64: dts: imx8ulp: correct the flexspi compatible string
arm64: dts: imx8-ss-vpu: Fix imx8qm VPU IRQs
Link: https://lore.kernel.org/r/ZxhsnnLudN2kD2Po@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Paragraph "3.4 Power up Timing Sequence" of the AzureWave-CM256SM
datasheet mentions the following about the BT_REG_ON pin, which is
connected to GPIO0_C4_d:
When this pin is low and WL_REG_ON is high,
the BT section is in reset.
Therefor set that pin to GPIO_ACTIVE_HIGH so that it can be pulled low
for a reset.
If set to GPIO_ACTIVE_LOW, the following errors are observed:
Bluetooth: hci0: command 0x0c03 tx timeout
Bluetooth: hci0: BCM: Reset failed (-110)
So fix the GPIO polarity by setting it to ACTIVE_HIGH.
This also matches what other devices with the same BT device have.
Fixes: 2b6a3f8575 ("arm64: dts: rockchip: Fix reset-gpios property on brcm BT nodes")
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20241018145053.11928-2-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The binding for Everest ES8328/ES8388 audio CODEC doesn't support the
'clock-names' property:
rk3588-orangepi-5-plus.dtb: audio-codec@11: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/sound/everest,es8328.yaml#
Since the related audio driver is also not making use of it, drop the
invalid property from all es8388 codec nodes.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20241019-es8328-dt-fixes-v1-1-ca77d5ce21ad@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The patch adding display support for the pinephone pro introduced two
regulators that contain pinctrl-names props but no pinctrl-assignments.
Looks like someone forgot the pinctrl settings, so remove the orphans
for now, until that changes.
Fixes: 3e987e1f22 ("arm64: dts: rockchip: Add internal display support to rk3399-pinephone-pro")
Cc: Martijn Braam <martijn@brixit.nl>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241008203940.2573684-11-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The fifth PCIe controller is connected to the PCIe North ANoC.
Fix the corresponding interconnect property so that the OS manages the
right path.
Fixes: 62ab23e155 ("arm64: dts: qcom: x1e80100: add PCIe5 nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241024131101.13587-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The fourth PCIe controller is connected to the PCIe North ANoC.
Fix the corresponding interconnect property so that the OS manages the
right path.
Fixes: 5eb83fc102 ("arm64: dts: qcom: x1e80100: Add PCIe nodes")
Cc: stable@vger.kernel.org # 6.9
Cc: Abel Vesa <abel.vesa@linaro.org>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241024131101.13587-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The 32-bit BAR spaces are reaching outside their assigned register
regions. Shrink them to match their actual sizes.
This resolves an issue where the regions overlap and one of the
controllers won't come up, which can be seen in the log as:
qcom-pcie 1c08000.pci: resource collision: [mem 0x7c300000-0x7fffffff] conflicts with 1c00000.pci dbi [mem 0x7e000000-0x7e000f1c]
While at it, unify the style.
Fixes: 5eb83fc102 ("arm64: dts: qcom: x1e80100: Add PCIe nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240710-topic-barman-v1-1-5f63fca8d0fc@linaro.org
[bjorn: Added note about overlapping resource regions]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The NVMe regulator has been left enabled by the boot firmware. Mark it
as such to avoid disabling the regulator temporarily during boot.
Fixes: eb57cbe730 ("arm64: dts: qcom: x1e80100: Describe the PCIe 6a resources")
Cc: stable@vger.kernel.org # 6.11
Cc: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241016145112.24785-7-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The NVMe regulator has been left enabled by the boot firmware. Mark it
as such to avoid disabling the regulator temporarily during boot.
Fixes: 09d77be560 ("arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices")
Cc: Konrad Dybcio <quic_kdybcio@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241016145112.24785-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The NVMe regulator has been left enabled by the boot firmware. Mark it
as such to avoid disabling the regulator temporarily during boot.
Fixes: 45247fe17d ("arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree")
Cc: stable@vger.kernel.org # 6.11
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241016145112.24785-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
