[ Upstream commit 614733f944 ]
Every pNFS SCSI IO wants to do LAYOUTGET, then within the layout find the
device which can drive GETDEVINFO, then finally may need to prep the device
with a reservation. This slow work makes a mess of IO latencies if one of
the later steps is going to fail for awhile.
If we're unable to register a SCSI device, ensure we mark the device as
unavailable so that it will timeout and be re-added via GETDEVINFO. This
avoids repeated doomed attempts to register a device in the IO path.
Add some clarifying comments as well.
Fixes: d869da91cc ("nfs/blocklayout: Fix premature PR key unregistration")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a4ce14d9a ]
Since commit d869da91cc ("nfs/blocklayout: Fix premature PR key
unregistration") an unmount of a pNFS SCSI layout-enabled NFS may
dereference a NULL block_device in:
bl_unregister_scsi+0x16/0xe0 [blocklayoutdriver]
bl_free_device+0x70/0x80 [blocklayoutdriver]
bl_free_deviceid_node+0x12/0x30 [blocklayoutdriver]
nfs4_put_deviceid_node+0x60/0xc0 [nfsv4]
nfs4_deviceid_purge_client+0x132/0x190 [nfsv4]
unset_pnfs_layoutdriver+0x59/0x60 [nfsv4]
nfs4_destroy_server+0x36/0x70 [nfsv4]
nfs_free_server+0x23/0xe0 [nfs]
deactivate_locked_super+0x30/0xb0
cleanup_mnt+0xba/0x150
task_work_run+0x59/0x90
syscall_exit_to_user_mode+0x217/0x220
do_syscall_64+0x8e/0x160
This happens because even though we were able to create the
nfs4_deviceid_node, the lookup for the device was unable to attach the
block device to the pnfs_block_dev.
If we never found a block device to register, we can avoid this case with
the PNFS_BDEV_REGISTERED flag. Move the deref behind the test for the
flag.
Fixes: d869da91cc ("nfs/blocklayout: Fix premature PR key unregistration")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52cb7f8f17 ]
When exporting only one file system with fsid=0 on the server side, the
client alternately uses the ro/rw mount options to perform the mount
operation, and a new vfsmount is generated each time.
It can be reproduced as follows:
[root@localhost ~]# mount /dev/sda /mnt2
[root@localhost ~]# echo "/mnt2 *(rw,no_root_squash,fsid=0)" >/etc/exports
[root@localhost ~]# systemctl restart nfs-server
[root@localhost ~]# mount -t nfs -o ro,vers=4 127.0.0.1:/ /mnt/sdaa
[root@localhost ~]# mount -t nfs -o rw,vers=4 127.0.0.1:/ /mnt/sdaa
[root@localhost ~]# mount -t nfs -o ro,vers=4 127.0.0.1:/ /mnt/sdaa
[root@localhost ~]# mount -t nfs -o rw,vers=4 127.0.0.1:/ /mnt/sdaa
[root@localhost ~]# mount | grep nfs4
127.0.0.1:/ on /mnt/sdaa type nfs4 (ro,relatime,vers=4.2,rsize=1048576,...
127.0.0.1:/ on /mnt/sdaa type nfs4 (rw,relatime,vers=4.2,rsize=1048576,...
127.0.0.1:/ on /mnt/sdaa type nfs4 (ro,relatime,vers=4.2,rsize=1048576,...
127.0.0.1:/ on /mnt/sdaa type nfs4 (rw,relatime,vers=4.2,rsize=1048576,...
[root@localhost ~]#
We expected that after mounting with the ro option, using the rw option to
mount again would return EBUSY, but the actual situation was not the case.
As shown above, when mounting for the first time, a superblock with the ro
flag will be generated, and at the same time, in do_new_mount_fc -->
do_add_mount, it detects that the superblock corresponding to the current
target directory is inconsistent with the currently generated one
(path->mnt->mnt_sb != newmnt->mnt.mnt_sb), and a new vfsmount will be
generated.
When mounting with the rw option for the second time, since no matching
superblock can be found in the fs_supers list, a new superblock with the
rw flag will be generated again. The superblock in use (ro) is different
from the newly generated superblock (rw), and a new vfsmount will be
generated again.
When mounting with the ro option for the third time, the superblock (ro)
is found in fs_supers, the superblock in use (rw) is different from the
found superblock (ro), and a new vfsmount will be generated again.
We can switch between ro/rw through remount, and only one superblock needs
to be generated, thus avoiding the problem of repeated generation of
vfsmount caused by switching superblocks.
Furthermore, This can also resolve the issue described in the link.
Fixes: 275a5d24bf ("NFS: Error when mounting the same filesystem with different options")
Link: https://lore.kernel.org/all/20240604112636.236517-3-lilingfeng@huaweicloud.com/
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cda88d2fef ]
Unlock before returning if smb3_sync_session_ctx_passwords() fails.
Fixes: 7e654ab7da03 ("cifs: during remount, make sure passwords are in sync")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f0e357902 ]
This fixes scenarios where remount can overwrite the only currently
working password, breaking reconnect.
We recently introduced a password2 field in both ses and ctx structs.
This was done so as to allow the client to rotate passwords for a mount
without any downtime. However, when the client transparently handles
password rotation, it can swap the values of the two password fields
in the ses struct, but not in smb3_fs_context struct that hangs off
cifs_sb. This can lead to a situation where a remount unintentionally
overwrites a working password in the ses struct.
In order to fix this, we first get the passwords in ctx struct
in-sync with ses struct, before replacing them with what the passwords
that could be passed as a part of remount.
Also, in order to avoid race condition between smb2_reconnect and
smb3_reconfigure, we make sure to lock session_mutex before changing
password and password2 fields of the ses structure.
Fixes: 35f834265e ("smb3: fix broken reconnect when password changing on the server by allowing password rotation")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c353ee4fb1 ]
Avoid leaking a tcon ref when a lease break races with opening the
cached directory. Processing the leak break might take a reference to
the tcon in cached_dir_lease_break() and then fail to release the ref in
cached_dir_offload_close, since cfid->tcon is still NULL.
Fixes: ebe98f1447 ("cifs: enable caching of directories for which a lease is held")
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4ca4f5a36 ]
SMB1 NT_TRANSACT_IOCTL/FSCTL_GET_REPARSE_POINT even in non-UNICODE mode
returns reparse buffer in UNICODE/UTF-16 format.
This is because FSCTL_GET_REPARSE_POINT is NT-based IOCTL which does not
distinguish between 8-bit non-UNICODE and 16-bit UNICODE modes and its path
buffers are always encoded in UTF-16.
This change fixes reading of native symlinks in SMB1 when UNICODE session
is not active.
Fixes: ed3e0a149b ("smb: client: implement ->query_reparse_point() for SMB1")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 723f4ef904 ]
SMB symlink which has SYMLINK_FLAG_RELATIVE set is relative (as opposite of
the absolute) and it can be relative either to the current directory (where
is the symlink stored) or relative to the top level export path. To what it
is relative depends on the first character of the symlink target path.
If the first character is path separator then symlink is relative to the
export, otherwise to the current directory. Linux (and generally POSIX
systems) supports only symlink paths relative to the current directory
where is symlink stored.
Currently if Linux SMB client reads relative SMB symlink with first
character as path separator (slash), it let as is. Which means that Linux
interpret it as absolute symlink pointing from the root (/). But this
location is different than the top level directory of SMB export (unless
SMB export was mounted to the root) and thefore SMB symlinks relative to
the export are interpreted wrongly by Linux SMB client.
Fix this problem. As Linux does not have equivalent of the path relative to
the top of the mount point, convert such symlink target path relative to
the current directory. Do this by prepending "../" pattern N times before
the SMB target path, where N is the number of path separators found in SMB
symlink path.
So for example, if SMB share is mounted to Linux path /mnt/share/, symlink
is stored in file /mnt/share/test/folder1/symlink (so SMB symlink path is
test\folder1\symlink) and SMB symlink target points to \test\folder2\file,
then convert symlink target path to Linux path ../../test/folder2/file.
Deduplicate code for parsing SMB symlinks in native form from functions
smb2_parse_symlink_response() and parse_reparse_native_symlink() into new
function smb2_parse_native_symlink() and pass into this new function a new
full_path parameter from callers, which specify SMB full path where is
symlink stored.
This change fixes resolving of the native Windows symlinks relative to the
top level directory of the SMB share.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: f4ca4f5a36 ("cifs: Fix parsing reparse point with native symlink in SMB1 non-UNICODE session")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ceaf145199 ]
Setting dir_cache_timeout to zero should disable the caching of
directory contents. Currently, even when dir_cache_timeout is zero,
some caching related functions are still invoked, which is unintended
behavior.
Fix the issue by setting tcon->nohandlecache to true when
dir_cache_timeout is zero, ensuring that directory handle caching
is properly disabled.
Fixes: 238b351d09 ("smb3: allow controlling length of time directory entries are cached with dir leases")
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66f9dac907 ]
This reverts commit b571cfcb9d.
This patch appears to assume that if one request is complete, then the
others will complete too before unlocking. That is not a valid
assumption, since other requests could hit a non-fatal error or a short
write that would cause them not to complete.
Reported-by: Igor Raits <igor@gooddata.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219508
Fixes: b571cfcb9d ("nfs: don't reuse partially completed requests in nfs_lock_and_join_requests")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bed2cc4826 ]
The __filemap_get_folio() function returns error pointers.
It never returns NULL. So use IS_ERR() to check it.
Fixes: 1da86618bd ("fs: Convert aops->write_begin to take a folio")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ba44ee966 ]
When building the kernel with -Wmaybe-uninitialized, the compiler
reports this warning:
In function 'jffs2_mark_erased_block',
inlined from 'jffs2_erase_pending_blocks' at fs/jffs2/erase.c:116:4:
fs/jffs2/erase.c:474:9: warning: 'bad_offset' may be used uninitialized [-Wmaybe-uninitialized]
474 | jffs2_erase_failed(c, jeb, bad_offset);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/jffs2/erase.c: In function 'jffs2_erase_pending_blocks':
fs/jffs2/erase.c:402:18: note: 'bad_offset' was declared here
402 | uint32_t bad_offset;
| ^~~~~~~~~~
When mtd->point() is used, jffs2_erase_pending_blocks can return -EIO
without initializing bad_offset, which is later used at the filebad
label in jffs2_mark_erased_block.
Fix it by initializing this variable.
Fixes: 8a0f572397 ("[JFFS2] Return values of jffs2_block_check_erase error paths")
Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4617fb8fc1 ]
After an insertion in TNC, the tree might split and cause a node to
change its `znode->parent`. A further deletion of other nodes in the
tree (which also could free the nodes), the aforementioned node's
`znode->cparent` could still point to a freed node. This
`znode->cparent` may not be updated when getting nodes to commit in
`ubifs_tnc_start_commit()`. This could then trigger a use-after-free
when accessing the `znode->cparent` in `write_index()` in
`ubifs_tnc_end_commit()`.
This can be triggered by running
rm -f /etc/test-file.bin
dd if=/dev/urandom of=/etc/test-file.bin bs=1M count=60 conv=fsync
in a loop, and with `CONFIG_UBIFS_FS_AUTHENTICATION`. KASAN then
reports:
BUG: KASAN: use-after-free in ubifs_tnc_end_commit+0xa5c/0x1950
Write of size 32 at addr ffffff800a3af86c by task ubifs_bgt0_20/153
Call trace:
dump_backtrace+0x0/0x340
show_stack+0x18/0x24
dump_stack_lvl+0x9c/0xbc
print_address_description.constprop.0+0x74/0x2b0
kasan_report+0x1d8/0x1f0
kasan_check_range+0xf8/0x1a0
memcpy+0x84/0xf4
ubifs_tnc_end_commit+0xa5c/0x1950
do_commit+0x4e0/0x1340
ubifs_bg_thread+0x234/0x2e0
kthread+0x36c/0x410
ret_from_fork+0x10/0x20
Allocated by task 401:
kasan_save_stack+0x38/0x70
__kasan_kmalloc+0x8c/0xd0
__kmalloc+0x34c/0x5bc
tnc_insert+0x140/0x16a4
ubifs_tnc_add+0x370/0x52c
ubifs_jnl_write_data+0x5d8/0x870
do_writepage+0x36c/0x510
ubifs_writepage+0x190/0x4dc
__writepage+0x58/0x154
write_cache_pages+0x394/0x830
do_writepages+0x1f0/0x5b0
filemap_fdatawrite_wbc+0x170/0x25c
file_write_and_wait_range+0x140/0x190
ubifs_fsync+0xe8/0x290
vfs_fsync_range+0xc0/0x1e4
do_fsync+0x40/0x90
__arm64_sys_fsync+0x34/0x50
invoke_syscall.constprop.0+0xa8/0x260
do_el0_svc+0xc8/0x1f0
el0_svc+0x34/0x70
el0t_64_sync_handler+0x108/0x114
el0t_64_sync+0x1a4/0x1a8
Freed by task 403:
kasan_save_stack+0x38/0x70
kasan_set_track+0x28/0x40
kasan_set_free_info+0x28/0x4c
__kasan_slab_free+0xd4/0x13c
kfree+0xc4/0x3a0
tnc_delete+0x3f4/0xe40
ubifs_tnc_remove_range+0x368/0x73c
ubifs_tnc_remove_ino+0x29c/0x2e0
ubifs_jnl_delete_inode+0x150/0x260
ubifs_evict_inode+0x1d4/0x2e4
evict+0x1c8/0x450
iput+0x2a0/0x3c4
do_unlinkat+0x2cc/0x490
__arm64_sys_unlinkat+0x90/0x100
invoke_syscall.constprop.0+0xa8/0x260
do_el0_svc+0xc8/0x1f0
el0_svc+0x34/0x70
el0t_64_sync_handler+0x108/0x114
el0t_64_sync+0x1a4/0x1a8
The offending `memcpy()` in `ubifs_copy_hash()` has a use-after-free
when a node becomes root in TNC but still has a `cparent` to an already
freed node. More specifically, consider the following TNC:
zroot
/
/
zp1
/
/
zn
Inserting a new node `zn_new` with a key smaller then `zn` will trigger
a split in `tnc_insert()` if `zp1` is full:
zroot
/ \
/ \
zp1 zp2
/ \
/ \
zn_new zn
`zn->parent` has now been moved to `zp2`, *but* `zn->cparent` still
points to `zp1`.
Now, consider a removal of all the nodes _except_ `zn`. Just when
`tnc_delete()` is about to delete `zroot` and `zp2`:
zroot
\
\
zp2
\
\
zn
`zroot` and `zp2` get freed and the tree collapses:
zn
`zn` now becomes the new `zroot`.
`get_znodes_to_commit()` will now only find `zn`, the new `zroot`, and
`write_index()` will check its `znode->cparent` that wrongly points to
the already freed `zp1`. `ubifs_copy_hash()` thus gets wrongly called
with `znode->cparent->zbranch[znode->iip].hash` that triggers the
use-after-free!
Fix this by explicitly setting `znode->cparent` to `NULL` in
`get_znodes_to_commit()` for the root node. The search for the dirty
nodes is bottom-up in the tree. Thus, when `find_next_dirty(znode)`
returns NULL, the current `znode` _is_ the root node. Add an assert for
this.
Fixes: 16a26b20d2 ("ubifs: authentication: Add hashes to index nodes")
Tested-by: Waqar Hameed <waqar.hameed@axis.com>
Co-developed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84a2bee9c4 ]
Since commit e874dcde1c ("ubifs: Reserve one leb for each journal
head while doing budget"), available space is calulated by deducting
reservation for all journal heads. However, the total block count (
which is only used by statfs) is not updated yet, which will cause
the wrong displaying for used space(total - available).
Fix it by deducting reservation for all journal heads from total
block count.
Fixes: e874dcde1c ("ubifs: Reserve one leb for each journal head while doing budget")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 650703bc4e ]
Otherwise memory corruption can occur due to NFSv3 LOCALIO reads
leaving garbage in res.replen:
- nfs3_read_done() copies that into server->read_hdrsize; from there
nfs3_proc_read_setup() copies it to args.replen in new requests.
- nfs3_xdr_enc_read3args() passes that to rpc_prepare_reply_pages()
which includes it in hdrsize for xdr_init_pages, so that rq_rcv_buf
contains a ridiculous len.
- This is copied to rq_private_buf and xs_read_stream_request()
eventually passes the kvec to sock_recvmsg() which receives incoming
data into entirely the wrong place.
This is easily reproduced with NFSv3 LOCALIO that is servicing reads
when it is made to pivot back to using normal RPC. This switch back
to using normal NFSv3 with RPC can occur for a few reasons but this
issue was exposed with a test that stops and then restarts the NFSv3
server while LOCALIO is performing heavy read IO.
Fixes: 70ba381e1a ("nfs: add LOCALIO support")
Reported-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Co-developed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fdb05dc09 ]
Yang Erkun reports that when two threads are opening files at the same
time, and are forced to abort before a reply is seen, then the call to
nfs_release_seqid() in nfs4_opendata_free() can result in a
use-after-free of the pointer to the defunct rpc task of the other
thread.
The fix is to ensure that if the RPC call is aborted before the call to
nfs_wait_on_sequence() is complete, then we must call nfs_release_seqid()
in nfs4_open_release() before the rpc_task is freed.
Reported-by: Yang Erkun <yangerkun@huawei.com>
Fixes: 24ac23ab88 ("NFSv4: Convert open() into an asynchronous RPC call")
Reviewed-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7f33b92e5b upstream.
If the tag length is >= U32_MAX - 3 then the "length + 4" addition
can result in an integer overflow. Address this by splitting the
decoding into several steps so that decode_cb_compound4res() does
not have to perform arithmetic on the unsafe length value.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6babe00ccd upstream.
syzbot reports a f2fs bug as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:2534!
RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534
Call Trace:
truncate_node+0x1ae/0x8c0 fs/f2fs/node.c:909
f2fs_remove_inode_page+0x5c2/0x870 fs/f2fs/node.c:1288
f2fs_evict_inode+0x879/0x15c0 fs/f2fs/inode.c:856
evict+0x4e8/0x9b0 fs/inode.c:723
f2fs_handle_failed_inode+0x271/0x2e0 fs/f2fs/inode.c:986
f2fs_create+0x357/0x530 fs/f2fs/namei.c:394
lookup_open fs/namei.c:3595 [inline]
open_last_lookups fs/namei.c:3694 [inline]
path_openat+0x1c03/0x3590 fs/namei.c:3930
do_filp_open+0x235/0x490 fs/namei.c:3960
do_sys_openat2+0x13e/0x1d0 fs/open.c:1415
do_sys_open fs/open.c:1430 [inline]
__do_sys_openat fs/open.c:1446 [inline]
__se_sys_openat fs/open.c:1441 [inline]
__x64_sys_openat+0x247/0x2a0 fs/open.c:1441
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534
The root cause is: on a fuzzed image, blkaddr in nat entry may be
corrupted, then it will cause system panic when using it in
f2fs_invalidate_blocks(), to avoid this, let's add sanity check on
nat blkaddr in truncate_node().
Reported-by: syzbot+33379ce4ac76acf7d0c7@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/0000000000009a6cd706224ca720@google.com/
Cc: stable@vger.kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3fa640d035 upstream.
The unmount process (cifs_kill_sb() calling close_all_cached_dirs()) can
race with various cached directory operations, which ultimately results
in dentries not being dropped and these kernel BUGs:
BUG: Dentry ffff88814f37e358{i=1000000000080,n=/} still in use (2) [unmount of cifs cifs]
VFS: Busy inodes after unmount of cifs (cifs)
------------[ cut here ]------------
kernel BUG at fs/super.c:661!
This happens when a cfid is in the process of being cleaned up when, and
has been removed from the cfids->entries list, including:
- Receiving a lease break from the server
- Server reconnection triggers invalidate_all_cached_dirs(), which
removes all the cfids from the list
- The laundromat thread decides to expire an old cfid.
To solve these problems, dropping the dentry is done in queued work done
in a newly-added cfid_put_wq workqueue, and close_all_cached_dirs()
flushes that workqueue after it drops all the dentries of which it's
aware. This is a global workqueue (rather than scoped to a mount), but
the queued work is minimal.
The final cleanup work for cleaning up a cfid is performed via work
queued in the serverclose_wq workqueue; this is done separate from
dropping the dentries so that close_all_cached_dirs() doesn't block on
any server operations.
Both of these queued works expect to invoked with a cfid reference and
a tcon reference to avoid those objects from being freed while the work
is ongoing.
While we're here, add proper locking to close_all_cached_dirs(), and
locking around the freeing of cfid->dentry.
Fixes: ebe98f1447 ("cifs: enable caching of directories for which a lease is held")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9685b409a upstream.
If open_cached_dir() encounters an error parsing the lease from the
server, the error handling may race with receiving a lease break,
resulting in open_cached_dir() freeing the cfid while the queued work is
pending.
Update open_cached_dir() to drop refs rather than directly freeing the
cfid.
Have cached_dir_lease_break(), cfids_laundromat_worker(), and
invalidate_all_cached_dirs() clear has_lease immediately while still
holding cfids->cfid_list_lock, and then use this to also simplify the
reference counting in cfids_laundromat_worker() and
invalidate_all_cached_dirs().
Fixes this KASAN splat (which manually injects an error and lease break
in open_cached_dir()):
==================================================================
BUG: KASAN: slab-use-after-free in smb2_cached_lease_break+0x27/0xb0
Read of size 8 at addr ffff88811cc24c10 by task kworker/3:1/65
CPU: 3 UID: 0 PID: 65 Comm: kworker/3:1 Not tainted 6.12.0-rc6-g255cf264e6e5-dirty #87
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
Workqueue: cifsiod smb2_cached_lease_break
Call Trace:
<TASK>
dump_stack_lvl+0x77/0xb0
print_report+0xce/0x660
kasan_report+0xd3/0x110
smb2_cached_lease_break+0x27/0xb0
process_one_work+0x50a/0xc50
worker_thread+0x2ba/0x530
kthread+0x17c/0x1c0
ret_from_fork+0x34/0x60
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 2464:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
open_cached_dir+0xa7d/0x1fb0
smb2_query_path_info+0x43c/0x6e0
cifs_get_fattr+0x346/0xf10
cifs_get_inode_info+0x157/0x210
cifs_revalidate_dentry_attr+0x2d1/0x460
cifs_getattr+0x173/0x470
vfs_statx_path+0x10f/0x160
vfs_statx+0xe9/0x150
vfs_fstatat+0x5e/0xc0
__do_sys_newfstatat+0x91/0xf0
do_syscall_64+0x95/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 2464:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x51/0x70
kfree+0x174/0x520
open_cached_dir+0x97f/0x1fb0
smb2_query_path_info+0x43c/0x6e0
cifs_get_fattr+0x346/0xf10
cifs_get_inode_info+0x157/0x210
cifs_revalidate_dentry_attr+0x2d1/0x460
cifs_getattr+0x173/0x470
vfs_statx_path+0x10f/0x160
vfs_statx+0xe9/0x150
vfs_fstatat+0x5e/0xc0
__do_sys_newfstatat+0x91/0xf0
do_syscall_64+0x95/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Last potentially related work creation:
kasan_save_stack+0x33/0x60
__kasan_record_aux_stack+0xad/0xc0
insert_work+0x32/0x100
__queue_work+0x5c9/0x870
queue_work_on+0x82/0x90
open_cached_dir+0x1369/0x1fb0
smb2_query_path_info+0x43c/0x6e0
cifs_get_fattr+0x346/0xf10
cifs_get_inode_info+0x157/0x210
cifs_revalidate_dentry_attr+0x2d1/0x460
cifs_getattr+0x173/0x470
vfs_statx_path+0x10f/0x160
vfs_statx+0xe9/0x150
vfs_fstatat+0x5e/0xc0
__do_sys_newfstatat+0x91/0xf0
do_syscall_64+0x95/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The buggy address belongs to the object at ffff88811cc24c00
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 16 bytes inside of
freed 1024-byte region [ffff88811cc24c00, ffff88811cc25000)
Cc: stable@vger.kernel.org
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0812340811 upstream.
We can't use PATH_MAX for SMB symlinks because
(1) Windows Server will fail FSCTL_SET_REPARSE_POINT with
STATUS_IO_REPARSE_DATA_INVALID when input buffer is larger than
16K, as specified in MS-FSA 2.1.5.10.37.
(2) The client won't be able to parse large SMB responses that
includes SMB symlink path within SMB2_CREATE or SMB2_IOCTL
responses.
Fix this by defining a maximum length value (4060) for SMB symlinks
that both client and server can handle.
Cc: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ed9d83a51 upstream.
This client was only requesting READ caching, not READ and HANDLE caching
in the LeaseState on the open requests we send for directories. To
delay closing a handle (e.g. for caching directory contents) we should
be requesting HANDLE as well as READ (as we already do for deferred
close of files). See MS-SMB2 3.3.1.4 e.g.
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 343d7fe6df upstream.
Customers have reported use-after-free in @ses->auth_key.response with
SMB2.1 + sign mounts which occurs due to following race:
task A task B
cifs_mount()
dfs_mount_share()
get_session()
cifs_mount_get_session() cifs_send_recv()
cifs_get_smb_ses() compound_send_recv()
cifs_setup_session() smb2_setup_request()
kfree_sensitive() smb2_calc_signature()
crypto_shash_setkey() *UAF*
Fix this by ensuring that we have a valid @ses->auth_key.response by
checking whether @ses->ses_status is SES_GOOD or SES_EXITING with
@ses->ses_lock held. After commit 24a9799aa8 ("smb: client: fix UAF
in smb2_reconnect_server()"), we made sure to call ->logoff() only
when @ses was known to be good (e.g. valid ->auth_key.response), so
it's safe to access signing key when @ses->ses_status == SES_EXITING.
Cc: stable@vger.kernel.org
Reported-by: Jay Shin <jaeshin@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d413eabff1 upstream.
The NT ACL format for an SMB3 POSIX Extensions chmod() is a single ACE with the
magic S-1-5-88-3-mode SID:
NT Security Descriptor
Revision: 1
Type: 0x8004, Self Relative, DACL Present
Offset to owner SID: 56
Offset to group SID: 124
Offset to SACL: 0
Offset to DACL: 20
Owner: S-1-5-21-3177838999-3893657415-1037673384-1000
Group: S-1-22-2-1000
NT User (DACL) ACL
Revision: NT4 (2)
Size: 36
Num ACEs: 1
NT ACE: S-1-5-88-3-438, flags 0x00, Access Allowed, mask 0x00000000
Type: Access Allowed
NT ACE Flags: 0x00
Size: 28
Access required: 0x00000000
SID: S-1-5-88-3-438
Owner and Group should be NULL, but the server is not required to fail the
request if they are present.
Signed-off-by: Ralph Boehme <slow@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a8c5d89d3 upstream.
A race condition exists between SMB request handling in
`ksmbd_conn_handler_loop()` and the freeing of `ksmbd_conn` in the
workqueue handler `handle_ksmbd_work()`. This leads to a UAF.
- KASAN: slab-use-after-free Read in handle_ksmbd_work
- KASAN: slab-use-after-free in rtlock_slowlock_locked
This race condition arises as follows:
- `ksmbd_conn_handler_loop()` waits for `conn->r_count` to reach zero:
`wait_event(conn->r_count_q, atomic_read(&conn->r_count) == 0);`
- Meanwhile, `handle_ksmbd_work()` decrements `conn->r_count` using
`atomic_dec_return(&conn->r_count)`, and if it reaches zero, calls
`ksmbd_conn_free()`, which frees `conn`.
- However, after `handle_ksmbd_work()` decrements `conn->r_count`,
it may still access `conn->r_count_q` in the following line:
`waitqueue_active(&conn->r_count_q)` or `wake_up(&conn->r_count_q)`
This results in a UAF, as `conn` has already been freed.
The discovery of this UAF can be referenced in the following PR for
syzkaller's support for SMB requests.
Link: https://github.com/google/syzkaller/pull/5524
Fixes: ee426bfb9d ("ksmbd: add refcnt to ksmbd_conn struct")
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org # v6.6.55+, v6.10.14+, v6.11.3+
Cc: syzkaller@googlegroups.com
Signed-off-by: Yunseong Kim <yskelg@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9aef1b13a upstream.
Fixes the case for example where the password specified on mount is a
recently expired password, but password2 is valid. Without this patch
this mount scenario would fail.
This patch introduces the following changes to support password rotation on
mount:
1. If an existing session is not found and the new session setup results in
EACCES, EKEYEXPIRED or EKEYREVOKED, swap password and password2 (if
available), and retry the mount.
2. To match the new mount with an existing session, add conditions to check
if a) password and password2 of the new mount and the existing session are
the same, or b) password of the new mount is the same as the password2 of
the existing session, and password2 of the new mount is the same as the
password of the existing session.
3. If an existing session is found, but needs reconnect, retry the session
setup after swapping password and password2 (if available), in case the
previous attempt results in EACCES, EKEYEXPIRED or EKEYREVOKED.
Cc: stable@vger.kernel.org
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b83203538 upstream.
This reverts commit 2a010c4128.
Rui Ueyama <rui314@gmail.com> writes:
> I'm the creator and the maintainer of the mold linker
> (https://github.com/rui314/mold). Recently, we discovered that mold
> started causing process crashes in certain situations due to a change
> in the Linux kernel. Here are the details:
>
> - In general, overwriting an existing file is much faster than
> creating an empty file and writing to it on Linux, so mold attempts to
> reuse an existing executable file if it exists.
>
> - If a program is running, opening the executable file for writing
> previously failed with ETXTBSY. If that happens, mold falls back to
> creating a new file.
>
> - However, the Linux kernel recently changed the behavior so that
> writing to an executable file is now always permitted
> (https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2a010c412853).
>
> That caused mold to write to an executable file even if there's a
> process running that file. Since changes to mmap'ed files are
> immediately visible to other processes, any processes running that
> file would almost certainly crash in a very mysterious way.
> Identifying the cause of these random crashes took us a few days.
>
> Rejecting writes to an executable file that is currently running is a
> well-known behavior, and Linux had operated that way for a very long
> time. So, I don’t believe relying on this behavior was our mistake;
> rather, I see this as a regression in the Linux kernel.
Quoting myself from commit 2a010c4128 ("fs: don't block i_writecount during exec")
> Yes, someone in userspace could potentially be relying on this. It's not
> completely out of the realm of possibility but let's find out if that's
> actually the case and not guess.
It seems we found out that someone is relying on this obscure behavior.
So revert the change.
Link: https://github.com/rui314/mold/issues/1361
Link: https://lore.kernel.org/r/4a2bc207-76be-4715-8e12-7fc45a76a125@leemhuis.info
Cc: <stable@vger.kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 184fa506e3 upstream.
In the case of the directory size is greater than or equal to
the cluster size, if start_clu becomes an EOF cluster(an invalid
cluster) due to file system corruption, then the directory entry
where ei->hint_femp.eidx hint is outside the directory, resulting
in an out-of-bounds access, which may cause further file system
corruption.
This commit adds a check for start_clu, if it is an invalid cluster,
the file or directory will be treated as empty.
Cc: stable@vger.kernel.org
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Co-developed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02dffe9ab0 upstream.
There is no check if stream size and start_clu are invalid.
If start_clu is EOF cluster and stream size is 4096, It will
cause uninit value access. because ei->hint_femp.eidx could
be 128(if cluster size is 4K) and wrong hint will allocate
next cluster. and this cluster will be same with the cluster
that is allocated by exfat_extend_valid_size(). The previous
patch will check invalid start_clu, but for clarity, initialize
hint_femp.eidx to zero.
Cc: stable@vger.kernel.org
Reported-by: syzbot+01218003be74b5e1213a@syzkaller.appspotmail.com
Tested-by: syzbot+01218003be74b5e1213a@syzkaller.appspotmail.com
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2714b0d1f3 upstream.
Currently when passing a closed file descriptor to
fcntl(fd, F_DUPFD_QUERY, fd_dup) the order matters:
fd = open("/dev/null");
fd_dup = dup(fd);
When we now close one of the file descriptors we get:
(1) fcntl(fd, fd_dup) // -EBADF
(2) fcntl(fd_dup, fd) // 0 aka not equal
depending on which file descriptor is passed first. That's not a huge
deal but it gives the api I slightly weird feel. Make it so that the
order doesn't matter by requiring that both file descriptors are valid:
(1') fcntl(fd, fd_dup) // -EBADF
(2') fcntl(fd_dup, fd) // -EBADF
Link: https://lore.kernel.org/r/20241008-duften-formel-251f967602d5@brauner
Fixes: c62b758bae ("fcntl: add F_DUPFD_QUERY fcntl()")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-By: Lennart Poettering <lennart@poettering.net>
Cc: stable@vger.kernel.org
Reported-by: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 21d1b618b6 upstream.
Ensure the superblock is kept alive until we're done with iput().
Holding a reference to an inode is not allowed unless we ensure the
superblock stays alive, which fsnotify does by keeping the
watched_objects count elevated, so iput() must happen before the
watched_objects decrement.
This can lead to a UAF of something like sb->s_fs_info in tmpfs, but the
UAF is hard to hit because race orderings that oops are more likely, thanks
to the CHECK_DATA_CORRUPTION() block in generic_shutdown_super().
Also, ensure that fsnotify_put_sb_watched_objects() doesn't call
fsnotify_sb_watched_objects() on a superblock that may have already been
freed, which would cause a UAF read of sb->s_fsnotify_info.
Cc: stable@kernel.org
Fixes: d2f277e26f ("fsnotify: rename fsnotify_{get,put}_sb_connectors()")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa52c54da4 upstream.
We got a report that adding a fanotify filsystem watch prevents tail -f
from receiving events.
Reproducer:
1. Create 3 windows / login sessions. Become root in each session.
2. Choose a mounted filesystem that is pretty quiet; I picked /boot.
3. In the first window, run: fsnotifywait -S -m /boot
4. In the second window, run: echo data >> /boot/foo
5. In the third window, run: tail -f /boot/foo
6. Go back to the second window and run: echo more data >> /boot/foo
7. Observe that the tail command doesn't show the new data.
8. In the first window, hit control-C to interrupt fsnotifywait.
9. In the second window, run: echo still more data >> /boot/foo
10. Observe that the tail command in the third window has now printed
the missing data.
When stracing tail, we observed that when fanotify filesystem mark is
set, tail does get the inotify event, but the event is receieved with
the filename:
read(4, "\1\0\0\0\2\0\0\0\0\0\0\0\20\0\0\0foo\0\0\0\0\0\0\0\0\0\0\0\0\0",
50) = 32
This is unexpected, because tail is watching the file itself and not its
parent and is inconsistent with the inotify event received by tail when
fanotify filesystem mark is not set:
read(4, "\1\0\0\0\2\0\0\0\0\0\0\0\0\0\0\0", 50) = 16
The inteference between different fsnotify groups was caused by the fact
that the mark on the sb requires the filename, so the filename is passed
to fsnotify(). Later on, fsnotify_handle_event() tries to take care of
not passing the filename to groups (such as inotify) that are interested
in the filename only when the parent is watching.
But the logic was incorrect for the case that no group is watching the
parent, some groups are watching the sb and some watching the inode.
Reported-by: Miklos Szeredi <miklos@szeredi.hu>
Fixes: 7372e79c9e ("fanotify: fix logic of reporting name info with watched parent")
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9f9d96136 upstream.
Commit 7c55b78818 ("jfs: xattr: fix buffer overflow for invalid xattr")
also addresses this issue but it only fixes it for positive values, while
ea_size is an integer type and can take negative values, e.g. in case of
a corrupted filesystem. This still breaks validation and would overflow
because of implicit conversion from int to size_t in print_hex_dump().
Fix this issue by clamping the ea_size value instead.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Cc: stable@vger.kernel.org
Signed-off-by: Artem Sadovnikov <ancowi69@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a622e4d47 upstream.
The original implementation ext4's FS_IOC_GETFSMAP handling only
worked when the range of queried blocks included at least one free
(unallocated) block range. This is because how the metadata blocks
were emitted was as a side effect of ext4_mballoc_query_range()
calling ext4_getfsmap_datadev_helper(), and that function was only
called when a free block range was identified. As a result, this
caused generic/365 to fail.
Fix this by creating a new function ext4_getfsmap_meta_helper() which
gets called so that blocks before the first free block range in a
block group can get properly reported.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 902cc179c9 upstream.
find_group_other() and find_group_orlov() read *_lo, *_hi with
ext4_free_inodes_count without additional locking. This can cause
data-race warning, but since the lock is held for most writes and free
inodes value is generally not a problem even if it is incorrect, it is
more appropriate to use READ_ONCE()/WRITE_ONCE() than to add locking.
==================================================================
BUG: KCSAN: data-race in ext4_free_inodes_count / ext4_free_inodes_set
write to 0xffff88810404300e of 2 bytes by task 6254 on cpu 1:
ext4_free_inodes_set+0x1f/0x80 fs/ext4/super.c:405
__ext4_new_inode+0x15ca/0x2200 fs/ext4/ialloc.c:1216
ext4_symlink+0x242/0x5a0 fs/ext4/namei.c:3391
vfs_symlink+0xca/0x1d0 fs/namei.c:4615
do_symlinkat+0xe3/0x340 fs/namei.c:4641
__do_sys_symlinkat fs/namei.c:4657 [inline]
__se_sys_symlinkat fs/namei.c:4654 [inline]
__x64_sys_symlinkat+0x5e/0x70 fs/namei.c:4654
x64_sys_call+0x1dda/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:267
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
read to 0xffff88810404300e of 2 bytes by task 6257 on cpu 0:
ext4_free_inodes_count+0x1c/0x80 fs/ext4/super.c:349
find_group_other fs/ext4/ialloc.c:594 [inline]
__ext4_new_inode+0x6ec/0x2200 fs/ext4/ialloc.c:1017
ext4_symlink+0x242/0x5a0 fs/ext4/namei.c:3391
vfs_symlink+0xca/0x1d0 fs/namei.c:4615
do_symlinkat+0xe3/0x340 fs/namei.c:4641
__do_sys_symlinkat fs/namei.c:4657 [inline]
__se_sys_symlinkat fs/namei.c:4654 [inline]
__x64_sys_symlinkat+0x5e/0x70 fs/namei.c:4654
x64_sys_call+0x1dda/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:267
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Cc: stable@vger.kernel.org
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://patch.msgid.link/20241003125337.47283-1-aha310510@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 62027820eb upstream.
In commit 11f4c3a53a, we tried to simplify the extent lookup in
xfs_can_free_eofblocks so that it doesn't incur the overhead of all the
extra stuff that xfs_bmapi_read does around the iext lookup.
Unfortunately, this causes regressions on generic/603, xfs/108,
generic/219, xfs/173, generic/694, xfs/052, generic/230, and xfs/441
when always_cow is turned on. In all cases, the regressions take the
form of alwayscow files consuming rather more space than the golden
output is expecting. I observed that in all these cases, the cause of
the excess space usage was due to CoW fork delalloc reservations that go
beyond EOF.
For alwayscow files we allow posteof delalloc CoW reservations because
all writes go through the CoW fork. Recall that all extents in the CoW
fork are accounted for via i_delayed_blks, which means that prior to
this patch, we'd invoke xfs_free_eofblocks on first close if anything
was in the CoW fork. Now we don't do that.
Fix the problem by reverting the removal of the i_delayed_blks check.
Cc: <stable@vger.kernel.org> # v6.12-rc1
Fixes: 11f4c3a53a ("xfs: simplify extent lookup in xfs_can_free_eofblocks")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a7a7c1d423 upstream.
After enable 16K page size, an infinite loop may occur in
fiemap (fm_length=UINT64_MAX) on a file, such as the 16KB
scratch.img during the remount operation in Android.
The condition for whether fiemap continues to map is to check
whether the number of bytes corresponding to the next map.m_lblk
exceeds blks_to_bytes(inode,max_inode_blocks(inode)) if there are HOLE.
The latter does not take into account the maximum size of a file with 16KB
page size, so the loop cannot be jumped out.
The following is the fail trace:
When f2fs_map_blocks reaches map.m_lblk=3936, it needs to go to the
first direct node block, so the map is 3936 + 4090 = 8026,
The next map is the second direct node block, that is,
8026 + 4090 = 12116,
The next map is the first indirect node block, that is,
12116 + 4090 * 4090 = 16740216,
The next map is the second indirect node block, that is,
16740216 + 4090 * 4090 = 33468316,
The next map is the first double indirect node block, that is,
33468316 + 4090 * 4090 * 4090 = 68451397316
Since map.m_lblk represents the address of a block, which is 32
bits, truncation will occur, that is, 68451397316 becomes
4026887876, and the number of bytes corresponding to the block
number does not exceed blks_to_bytes(inode,max_inode_blocks(inode)),
so the loop will not be jumped out.
The next time, it will be considered that it should still be a
double indirect node block, that is,
4026887876 + 4090 * 4090 * 4090 = 72444816876, which will be
truncated to 3725340140, and the loop will not be jumped out.
156.374871: f2fs_map_blocks: dev = (254,57), ino = 7449, file offset = 0, start blkaddr = 0x8e00, len = 0x200, flags = 2,seg_type = 8, may_create = 0, multidevice = 0, flag = 1, err = 0
156.374916: f2fs_map_blocks: dev = (254,57), ino = 7449, file offset = 512, start blkaddr = 0x0, len = 0x0, flags = 0 , seg_type = 8, may_create = 0, multidevice = 0, flag = 1, err = 0
156.374920: f2fs_map_blocks: dev = (254,57), ino = 7449, file offset = 513, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 8, may_create = 0, multidevice = 0, flag = 1, err = 0
......
156.385747: f2fs_map_blocks: dev = (254,57), ino = 7449, file offset = 3935, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 8, may_create = 0, multidevice = 0, flag = 1, err = 0
156.385752: f2fs_map_blocks: dev = (254,57), ino = 7449, file offset = 3936, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 8, may_create = 0, multidevice = 0, flag = 1, err = 0
156.385755: f2fs_map_blocks: dev = (254,57), ino = 7449, file offset = 8026, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 8, may_create = 0, multidevice = 0, flag = 1, err = 0
156.385758: f2fs_map_blocks: dev = (254,57), ino = 7449, file offset = 12116, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 8, may_create = 0, multidevice = 0, flag = 1, err = 0
156.385761: f2fs_map_blocks: dev = (254,57), ino = 7449, file offset = 16740216, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 8, may_create = 0, multidevice = 0, flag = 1, err = 0
156.385764: f2fs_map_blocks: dev = (254,57), ino = 7449, file offset = 33468316, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 8, may_create = 0, multidevice = 0, flag = 1, err = 0
156.385767: f2fs_map_blocks: dev = (254,57), ino = 7449, file offset = 4026887876, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 8, may_create = 0, multidevice = 0, flag = 1, err = 0
156.385770: f2fs_map_blocks: dev = (254,57), ino = 7449, file offset = 3725340140, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 8, may_create = 0, multidevice = 0, flag = 1, err = 0
156.385772: f2fs_map_blocks: dev = (254,57), ino = 7449, file offset = 4026887876, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 8, may_create = 0, multidevice = 0, flag = 1, err = 0
156.385775: f2fs_map_blocks: dev = (254,57), ino = 7449, file offset = 3725340140, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 8, may_create = 0, multidevice = 0, flag = 1, err = 0
Commit a6a010f5de ("f2fs: Restrict max filesize for 16K f2fs")
has set the maximum allowed file size to (U32_MAX + 1) * F2FS_BLKSIZE,
so max_file_blocks should be used here to limit it, that is,
maxbytes defined above. And the max_inode_blocks function is not
called by other functions except here, so cleanup it.
Signed-off-by: Xiuhong Wang <xiuhong.wang@unisoc.com>
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2e94e5bb94 ]
Unaligned direct writes are invalid and should return an error
without making any changes, rather than extending ->valid_size
and then returning an error. Therefore, alignment checking is
required before extending ->valid_size.
Fixes: 11a347fb6c ("exfat: change to get file size from DataLength")
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Co-developed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 045fff6193 ]
If using the proposed function folio_zero_range(), should one switch
from 'start + end' to 'start + length,' or use folio_zero_segment()
Fixes: 1da86618bd ("fs: Convert aops->write_begin to take a folio")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3273d8ad94 ]
It missed to cast variable to unsigned long long type before
bit shift, which will cause overflow, fix it.
Fixes: f7ef9b83b5 ("f2fs: introduce macros to convert bytes and blocks in f2fs")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62a8642ba0 ]
nfsd4_shutdown_copy() is just this:
while ((copy = nfsd4_get_copy(clp)) != NULL)
nfsd4_stop_copy(copy);
nfsd4_get_copy() bumps @copy's reference count, preventing
nfsd4_stop_copy() from releasing @copy.
A while loop like this usually works by removing the first element
of the list, but neither nfsd4_get_copy() nor nfsd4_stop_copy()
alters the async_copies list.
Best I can tell, then, is that nfsd4_shutdown_copy() continues to
loop until other threads manage to remove all the items from this
list. The spinning loop blocks shutdown until these items are gone.
Possibly the reason we haven't seen this issue in the field is
because client_has_state() prevents __destroy_client() from calling
nfsd4_shutdown_copy() if there are any items on this list. In a
subsequent patch I plan to remove that restriction.
Fixes: e0639dc580 ("NFSD introduce async copy feature")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8c989a0c8 ]
The last reference for `cache_head` can be reduced to zero in `c_show`
and `e_show`(using `rcu_read_lock` and `rcu_read_unlock`). Consequently,
`svc_export_put` and `expkey_put` will be invoked, leading to two
issues:
1. The `svc_export_put` will directly free ex_uuid. However,
`e_show`/`c_show` will access `ex_uuid` after `cache_put`, which can
trigger a use-after-free issue, shown below.
==================================================================
BUG: KASAN: slab-use-after-free in svc_export_show+0x362/0x430 [nfsd]
Read of size 1 at addr ff11000010fdc120 by task cat/870
CPU: 1 UID: 0 PID: 870 Comm: cat Not tainted 6.12.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_address_description.constprop.0+0x2c/0x3a0
print_report+0xb9/0x280
kasan_report+0xae/0xe0
svc_export_show+0x362/0x430 [nfsd]
c_show+0x161/0x390 [sunrpc]
seq_read_iter+0x589/0x770
seq_read+0x1e5/0x270
proc_reg_read+0xe1/0x140
vfs_read+0x125/0x530
ksys_read+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Allocated by task 830:
kasan_save_stack+0x20/0x40
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
__kmalloc_node_track_caller_noprof+0x1bc/0x400
kmemdup_noprof+0x22/0x50
svc_export_parse+0x8a9/0xb80 [nfsd]
cache_do_downcall+0x71/0xa0 [sunrpc]
cache_write_procfs+0x8e/0xd0 [sunrpc]
proc_reg_write+0xe1/0x140
vfs_write+0x1a5/0x6d0
ksys_write+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 868:
kasan_save_stack+0x20/0x40
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x37/0x50
kfree+0xf3/0x3e0
svc_export_put+0x87/0xb0 [nfsd]
cache_purge+0x17f/0x1f0 [sunrpc]
nfsd_destroy_serv+0x226/0x2d0 [nfsd]
nfsd_svc+0x125/0x1e0 [nfsd]
write_threads+0x16a/0x2a0 [nfsd]
nfsctl_transaction_write+0x74/0xa0 [nfsd]
vfs_write+0x1a5/0x6d0
ksys_write+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
2. We cannot sleep while using `rcu_read_lock`/`rcu_read_unlock`.
However, `svc_export_put`/`expkey_put` will call path_put, which
subsequently triggers a sleeping operation due to the following
`dput`.
=============================
WARNING: suspicious RCU usage
5.10.0-dirty #141 Not tainted
-----------------------------
...
Call Trace:
dump_stack+0x9a/0xd0
___might_sleep+0x231/0x240
dput+0x39/0x600
path_put+0x1b/0x30
svc_export_put+0x17/0x80
e_show+0x1c9/0x200
seq_read_iter+0x63f/0x7c0
seq_read+0x226/0x2d0
vfs_read+0x113/0x2c0
ksys_read+0xc9/0x170
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Fix these issues by using `rcu_work` to help release
`svc_expkey`/`svc_export`. This approach allows for an asynchronous
context to invoke `path_put` and also facilitates the freeing of
`uuid/exp/key` after an RCU grace period.
Fixes: 9ceddd9da1 ("knfsd: Allow lockless lookups of the exports")
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e02c641c3 ]
@ses is initialized to NULL. If __nfsd4_find_backchannel() finds no
available backchannel session, setup_callback_client() will try to
dereference @ses and segfault.
Fixes: dcbeaa68db ("nfsd4: allow backchannel recovery")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f67eef8da0 ]
The inode that nfs4_open_delegation() passes to this function is
wrong, which throws off the result. The inode will end up getting a
directory-style change attr instead of a regular-file-style one.
Fix up nfs4_delegation_stat() to fetch STATX_MODE, and then drop the
inode parameter from nfsd4_change_attribute(), since it's no longer
needed.
Fixes: c5967721e1 ("NFSD: handle GETATTR conflict with write delegation")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26e6f59d0b ]
Jinsu Lee reported a performance regression issue, after commit
5c8764f867 ("f2fs: fix to force buffered IO on inline_data
inode"), we forced direct write to use buffered IO on inline_data
inode, it will cause performace regression due to memory copy
and data flush.
It's fine to not force direct write to use buffered IO, as it
can convert inline inode before committing direct write IO.
Fixes: 5c8764f867 ("f2fs: fix to force buffered IO on inline_data inode")
Reported-by: Jinsu Lee <jinsu1.lee@samsung.com>
Closes: https://lore.kernel.org/linux-f2fs-devel/af03dd2c-e361-4f80-b2fd-39440766cf6e@kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
