commit f3600c867c upstream.
Currently on stable trees we have support for netmem/devmem RX but not
TX. It is not safe to forward/redirect an RX unreadable netmem packet
into the device's TX path, as the device may call dma-mapping APIs on
dma addrs that should not be passed to it.
Fix this by preventing the xmit of unreadable skbs.
Tested by configuring tc redirect:
sudo tc qdisc add dev eth1 ingress
sudo tc filter add dev eth1 ingress protocol ip prio 1 flower ip_proto \
tcp src_ip 192.168.1.12 action mirred egress redirect dev eth1
Before, I see unreadable skbs in the driver's TX path passed to dma
mapping APIs.
After, I don't see unreadable skbs in the driver's TX path passed to dma
mapping APIs.
Fixes: 65249feb6b ("net: add support for skbs with unreadable frags")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250306215520.1415465-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 77e45145e3 ]
napi_schedule() is expected to be called either:
* From an interrupt, where raised softirqs are handled on IRQ exit
* From a softirq disabled section, where raised softirqs are handled on
the next call to local_bh_enable().
* From a softirq handler, where raised softirqs are handled on the next
round in do_softirq(), or further deferred to a dedicated kthread.
Other bare tasks context may end up ignoring the raised NET_RX vector
until the next random softirq handling opportunity, which may not
happen before a while if the CPU goes idle afterwards with the tick
stopped.
Such "misuses" have been detected on several places thanks to messages
of the kind:
"NOHZ tick-stop error: local softirq work is pending, handler #08!!!"
For example:
__raise_softirq_irqoff
__napi_schedule
rtl8152_runtime_resume.isra.0
rtl8152_resume
usb_resume_interface.isra.0
usb_resume_both
__rpm_callback
rpm_callback
rpm_resume
__pm_runtime_resume
usb_autoresume_device
usb_remote_wakeup
hub_event
process_one_work
worker_thread
kthread
ret_from_fork
ret_from_fork_asm
And also:
* drivers/net/usb/r8152.c::rtl_work_func_t
* drivers/net/netdevsim/netdev.c::nsim_start_xmit
There is a long history of issues of this kind:
019edd01d1 ("ath10k: sdio: Add missing BH locking around napi_schdule()")
3300685893 ("idpf: disable local BH when scheduling napi for marker packets")
e3d5d70cb4 ("net: lan78xx: fix "softirq work is pending" error")
e55c27ed9c ("mt76: mt7615: add missing bh-disable around rx napi schedule")
c0182aa985 ("mt76: mt7915: add missing bh-disable around tx napi enable/schedule")
970be1dff2 ("mt76: disable BH around napi_schedule() calls")
019edd01d1 ("ath10k: sdio: Add missing BH locking around napi_schdule()")
30bfec4fec ("can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to be called from threaded interrupt")
e63052a5dd ("mlx5e: add add missing BH locking around napi_schdule()")
83a0c6e589 ("i40e: Invoke softirqs after napi_reschedule")
bd4ce941c8 ("mlx4: Invoke softirqs after napi_reschedule")
8cf699ec84 ("mlx4: do not call napi_schedule() without care")
ec13ee8014 ("virtio_net: invoke softirqs after __napi_schedule")
This shows that relying on the caller to arrange a proper context for
the softirqs to be handled while calling napi_schedule() is very fragile
and error prone. Also fixing them can also prove challenging if the
caller may be called from different kinds of contexts.
Therefore fix this from napi_schedule() itself with waking up ksoftirqd
when softirqs are raised from task contexts.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Francois Romieu <romieu@fr.zoreil.com>
Closes: https://lore.kernel.org/lkml/354a2690-9bbf-4ccb-8769-fa94707a9340@molgen.mpg.de/
Cc: Breno Leitao <leitao@debian.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250223221708.27130-1-frederic@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db75a16813 ]
Recently, some fallback have been initiated, while the connection was
not supposed to fallback.
Add a safety check with a warning to detect when an wrong attempt to
fallback is being done. This should help detecting any future issues
quicker.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-3-f550f636b435@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 606572eb22 ]
According to the C11 standard (ISO/IEC 9899:2011, 6.5.7):
"If E1 has a signed type and E1 x 2^E2 is not representable in the result
type, the behavior is undefined."
Shifting 1 << 31 causes signed integer overflow, which leads to undefined
behavior.
Fix this by explicitly using '1U << 31' to ensure the shift operates on
an unsigned type, avoiding undefined behavior.
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://patch.msgid.link/20250218081217.3468369-1-eleanor15x@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1063ae0738 ]
Currently, ovs_ct_set_labels() is only called for confirmed conntrack
entries (ct) within ovs_ct_commit(). However, if the conntrack entry
does not have the labels_ext extension, attempting to allocate it in
ovs_ct_get_conn_labels() for a confirmed entry triggers a warning in
nf_ct_ext_add():
WARN_ON(nf_ct_is_confirmed(ct));
This happens when the conntrack entry is created externally before OVS
increments net->ct.labels_used. The issue has become more likely since
commit fcb1aa5163 ("openvswitch: switch to per-action label counting
in conntrack"), which changed to use per-action label counting and
increment net->ct.labels_used when a flow with ct action is added.
Since there’s no straightforward way to fully resolve this issue at the
moment, this reverts the commit to avoid breaking existing use cases.
Fixes: fcb1aa5163 ("openvswitch: switch to per-action label counting in conntrack")
Reported-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/1bdeb2f3a812bca016a225d3de714427b2cd4772.1741457143.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1e64addf3 ]
The actions length check is unreliable and produces different results
depending on the initial length of the provided netlink attribute and
the composition of the actual actions inside of it. For example, a
user can add 4088 empty clone() actions without triggering -EMSGSIZE,
on attempt to add 4089 such actions the operation will fail with the
-EMSGSIZE verdict. However, if another 16 KB of other actions will
be *appended* to the previous 4089 clone() actions, the check passes
and the flow is successfully installed into the openvswitch datapath.
The reason for a such a weird behavior is the way memory is allocated.
When ovs_flow_cmd_new() is invoked, it calls ovs_nla_copy_actions(),
that in turn calls nla_alloc_flow_actions() with either the actual
length of the user-provided actions or the MAX_ACTIONS_BUFSIZE. The
function adds the size of the sw_flow_actions structure and then the
actually allocated memory is rounded up to the closest power of two.
So, if the user-provided actions are larger than MAX_ACTIONS_BUFSIZE,
then MAX_ACTIONS_BUFSIZE + sizeof(*sfa) rounded up is 32K + 24 -> 64K.
Later, while copying individual actions, we look at ksize(), which is
64K, so this way the MAX_ACTIONS_BUFSIZE check is not actually
triggered and the user can easily allocate almost 64 KB of actions.
However, when the initial size is less than MAX_ACTIONS_BUFSIZE, but
the actions contain ones that require size increase while copying
(such as clone() or sample()), then the limit check will be performed
during the reserve_sfa_size() and the user will not be allowed to
create actions that yield more than 32 KB internally.
This is one part of the problem. The other part is that it's not
actually possible for the userspace application to know beforehand
if the particular set of actions will be rejected or not.
Certain actions require more space in the internal representation,
e.g. an empty clone() takes 4 bytes in the action list passed in by
the user, but it takes 12 bytes in the internal representation due
to an extra nested attribute, and some actions require less space in
the internal representations, e.g. set(tunnel(..)) normally takes
64+ bytes in the action list provided by the user, but only needs to
store a single pointer in the internal implementation, since all the
data is stored in the tunnel_info structure instead.
And the action size limit is applied to the internal representation,
not to the action list passed by the user. So, it's not possible for
the userpsace application to predict if the certain combination of
actions will be rejected or not, because it is not possible for it to
calculate how much space these actions will take in the internal
representation without knowing kernel internals.
All that is causing random failures in ovs-vswitchd in userspace and
inability to handle certain traffic patterns as a result. For example,
it is reported that adding a bit more than a 1100 VMs in an OpenStack
setup breaks the network due to OVS not being able to handle ARP
traffic anymore in some cases (it tries to install a proper datapath
flow, but the kernel rejects it with -EMSGSIZE, even though the action
list isn't actually that large.)
Kernel behavior must be consistent and predictable in order for the
userspace application to use it in a reasonable way. ovs-vswitchd has
a mechanism to re-direct parts of the traffic and partially handle it
in userspace if the required action list is oversized, but that doesn't
work properly if we can't actually tell if the action list is oversized
or not.
Solution for this is to check the size of the user-provided actions
instead of the internal representation. This commit just removes the
check from the internal part because there is already an implicit size
check imposed by the netlink protocol. The attribute can't be larger
than 64 KB. Realistically, we could reduce the limit to 32 KB, but
we'll be risking to break some existing setups that rely on the fact
that it's possible to create nearly 64 KB action lists today.
Vast majority of flows in real setups are below 100-ish bytes. So
removal of the limit will not change real memory consumption on the
system. The absolutely worst case scenario is if someone adds a flow
with 64 KB of empty clone() actions. That will yield a 192 KB in the
internal representation consuming 256 KB block of memory. However,
that list of actions is not meaningful and also a no-op. Real world
very large action lists (that can occur for a rare cases of BUM
traffic handling) are unlikely to contain a large number of clones and
will likely have a lot of tunnel attributes making the internal
representation comparable in size to the original action list.
So, it should be fine to just remove the limit.
Commit in the 'Fixes' tag is the first one that introduced the
difference between internal representation and the user-provided action
lists, but there were many more afterwards that lead to the situation
we have today.
Fixes: 7d5437c709 ("openvswitch: Add tunneling interface.")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250308004609.2881861-1-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 183185a18f ]
Use addrconf_addr_gen() to generate IPv6 link-local addresses on GRE
devices in most cases and fall back to using add_v4_addrs() only in
case the GRE configuration is incompatible with addrconf_addr_gen().
GRE used to use addrconf_addr_gen() until commit e5dd729460
("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL
address") restricted this use to gretap and ip6gretap devices, and
created add_v4_addrs() (borrowed from SIT) for non-Ethernet GRE ones.
The original problem came when commit 9af28511be ("addrconf: refuse
isatap eui64 for INADDR_ANY") made __ipv6_isatap_ifid() fail when its
addr parameter was 0. The commit says that this would create an invalid
address, however, I couldn't find any RFC saying that the generated
interface identifier would be wrong. Anyway, since gre over IPv4
devices pass their local tunnel address to __ipv6_isatap_ifid(), that
commit broke their IPv6 link-local address generation when the local
address was unspecified.
Then commit e5dd729460 ("ip/ip6_gre: use the same logic as SIT
interfaces when computing v6LL address") tried to fix that case by
defining add_v4_addrs() and calling it to generate the IPv6 link-local
address instead of using addrconf_addr_gen() (apart for gretap and
ip6gretap devices, which would still use the regular
addrconf_addr_gen(), since they have a MAC address).
That broke several use cases because add_v4_addrs() isn't properly
integrated into the rest of IPv6 Neighbor Discovery code. Several of
these shortcomings have been fixed over time, but add_v4_addrs()
remains broken on several aspects. In particular, it doesn't send any
Router Sollicitations, so the SLAAC process doesn't start until the
interface receives a Router Advertisement. Also, add_v4_addrs() mostly
ignores the address generation mode of the interface
(/proc/sys/net/ipv6/conf/*/addr_gen_mode), thus breaking the
IN6_ADDR_GEN_MODE_RANDOM and IN6_ADDR_GEN_MODE_STABLE_PRIVACY cases.
Fix the situation by using add_v4_addrs() only in the specific scenario
where the normal method would fail. That is, for interfaces that have
all of the following characteristics:
* run over IPv4,
* transport IP packets directly, not Ethernet (that is, not gretap
interfaces),
* tunnel endpoint is INADDR_ANY (that is, 0),
* device address generation mode is EUI64.
In all other cases, revert back to the regular addrconf_addr_gen().
Also, remove the special case for ip6gre interfaces in add_v4_addrs(),
since ip6gre devices now always use addrconf_addr_gen() instead.
Fixes: e5dd729460 ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/559c32ce5c9976b269e6337ac9abb6a96abe5096.1741375285.git.gnault@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6edd78af95 ]
There is an incorrect calculation in the offset variable which causes
the nft_skb_copy_to_reg() function to always return -EFAULT. Adding the
start variable is redundant. In the __ip_options_compile() function the
correct offset is specified when finding the function. There is no need
to add the size of the iphdr structure to the offset.
Fixes: dbb5281a1f ("netfilter: nf_tables: add support for matching IPv4 options")
Signed-off-by: Alexey Kashavkin <akashavkin@gmail.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c3057a5a0 ]
The function qdisc_tree_reduce_backlog() uses TC_H_ROOT as a termination
condition when traversing up the qdisc tree to update parent backlog
counters. However, if a class is created with classid TC_H_ROOT, the
traversal terminates prematurely at this class instead of reaching the
actual root qdisc, causing parent statistics to be incorrectly maintained.
In case of DRR, this could lead to a crash as reported by Mingi Cho.
Prevent the creation of any Qdisc class with classid TC_H_ROOT
(0xFFFFFFFF) across all qdisc types, as suggested by Jamal.
Reported-by: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 066a3b5b23 ("[NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop")
Link: https://patch.msgid.link/20250306232355.93864-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80b78c39eb ]
The get->num_services variable is an unsigned int which is controlled by
the user. The struct_size() function ensures that the size calculation
does not overflow an unsigned long, however, we are saving the result to
an int so the calculation can overflow.
Both "len" and "get->num_services" come from the user. This check is
just a sanity check to help the user and ensure they are using the API
correctly. An integer overflow here is not a big deal. This has no
security impact.
Save the result from struct_size() type size_t to fix this integer
overflow bug.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5d83cf0ee ]
Ensure that the frag_list used for reassembly isn't shared with other
packets. This avoids incorrect reassembly when packets are cloned, and
prevents a memory leak due to circular references between fragments and
their skb_shared_info.
The upcoming MCTP-over-USB driver uses skb_clone which can trigger the
problem - other MCTP drivers don't share SKBs.
A kunit test is added to reproduce the issue.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Fixes: 4a992bbd36 ("mctp: Implement message fragmentation & reassembly")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306-matt-mctp-usb-v1-1-085502b3dd28@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62531a1eff ]
A blocking notification chain uses a read-write semaphore to protect the
integrity of the chain. The semaphore is acquired for writing when
adding / removing notifiers to / from the chain and acquired for reading
when traversing the chain and informing notifiers about an event.
In case of the blocking switchdev notification chain, recursive
notifications are possible which leads to the semaphore being acquired
twice for reading and to lockdep warnings being generated [1].
Specifically, this can happen when the bridge driver processes a
SWITCHDEV_BRPORT_UNOFFLOADED event which causes it to emit notifications
about deferred events when calling switchdev_deferred_process().
Fix this by converting the notification chain to a raw notification
chain in a similar fashion to the netdev notification chain. Protect
the chain using the RTNL mutex by acquiring it when modifying the chain.
Events are always informed under the RTNL mutex, but add an assertion in
call_switchdev_blocking_notifiers() to make sure this is not violated in
the future.
Maintain the "blocking" prefix as events are always emitted from process
context and listeners are allowed to block.
[1]:
WARNING: possible recursive locking detected
6.14.0-rc4-custom-g079270089484 #1 Not tainted
--------------------------------------------
ip/52731 is trying to acquire lock:
ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0
but task is already holding lock:
ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock((switchdev_blocking_notif_chain).rwsem);
lock((switchdev_blocking_notif_chain).rwsem);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by ip/52731:
#0: ffffffff84f795b0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x727/0x1dc0
#1: ffffffff8731f628 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x790/0x1dc0
#2: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0
stack backtrace:
...
? __pfx_down_read+0x10/0x10
? __pfx_mark_lock+0x10/0x10
? __pfx_switchdev_port_attr_set_deferred+0x10/0x10
blocking_notifier_call_chain+0x58/0xa0
switchdev_port_attr_notify.constprop.0+0xb3/0x1b0
? __pfx_switchdev_port_attr_notify.constprop.0+0x10/0x10
? mark_held_locks+0x94/0xe0
? switchdev_deferred_process+0x11a/0x340
switchdev_port_attr_set_deferred+0x27/0xd0
switchdev_deferred_process+0x164/0x340
br_switchdev_port_unoffload+0xc8/0x100 [bridge]
br_switchdev_blocking_event+0x29f/0x580 [bridge]
notifier_call_chain+0xa2/0x440
blocking_notifier_call_chain+0x6e/0xa0
switchdev_bridge_port_unoffload+0xde/0x1a0
...
Fixes: f7a70d650b ("net: bridge: switchdev: Ensure deferred event delivery on unoffload")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20250305121509.631207-1-amcohen@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 505ead7ab7 ]
The function __netpoll_send_skb() is being invoked without holding the
RCU read lock. This oversight triggers a warning message when
CONFIG_PROVE_RCU_LIST is enabled:
net/core/netpoll.c:330 suspicious rcu_dereference_check() usage!
netpoll_send_skb
netpoll_send_udp
write_ext_msg
console_flush_all
console_unlock
vprintk_emit
To prevent npinfo from disappearing unexpectedly, ensure that
__netpoll_send_skb() is protected with the RCU read lock.
Fixes: 2899656b49 ("netpoll: take rcu_read_lock_bh() in netpoll_send_skb_on_dev()")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306-netpoll_rcu_v2-v2-1-bc4f5c51742a@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab6ab707a4 ]
This reverts commit 4d94f05558 which has
problems (see [1]) and is no longer needed since 581dd2dc16
("Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating")
has reworked the code where the original bug has been found.
[1] Link: https://lore.kernel.org/linux-bluetooth/877c55ci1r.wl-tiwai@suse.de/T/#t
Fixes: 4d94f05558 ("Bluetooth: hci_core: Fix sleeping function called from invalid context")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0bdd889715 ]
Passive scanning shall only be enabled when disconnecting LE links,
otherwise it may start result in triggering scanning when e.g. an ISO
link disconnects:
> HCI Event: LE Meta Event (0x3e) plen 29
LE Connected Isochronous Stream Established (0x19)
Status: Success (0x00)
Connection Handle: 257
CIG Synchronization Delay: 0 us (0x000000)
CIS Synchronization Delay: 0 us (0x000000)
Central to Peripheral Latency: 10000 us (0x002710)
Peripheral to Central Latency: 10000 us (0x002710)
Central to Peripheral PHY: LE 2M (0x02)
Peripheral to Central PHY: LE 2M (0x02)
Number of Subevents: 1
Central to Peripheral Burst Number: 1
Peripheral to Central Burst Number: 1
Central to Peripheral Flush Timeout: 2
Peripheral to Central Flush Timeout: 2
Central to Peripheral MTU: 320
Peripheral to Central MTU: 160
ISO Interval: 10.00 msec (0x0008)
...
> HCI Event: Disconnect Complete (0x05) plen 4
Status: Success (0x00)
Handle: 257
Reason: Remote User Terminated Connection (0x13)
< HCI Command: LE Set Extended Scan Enable (0x08|0x0042) plen 6
Extended scan: Enabled (0x01)
Filter duplicates: Enabled (0x01)
Duration: 0 msec (0x0000)
Period: 0.00 sec (0x0000)
Fixes: 9fcb18ef3a ("Bluetooth: Introduce LE auto connect options")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72d520476a ]
A wiphy_work can be queued from the moment the wiphy is allocated and
initialized (i.e. wiphy_new_nm). When a wiphy_work is queued, the
rdev::wiphy_work is getting queued.
If wiphy_free is called before the rdev::wiphy_work had a chance to run,
the wiphy memory will be freed, and then when it eventally gets to run
it'll use invalid memory.
Fix this by canceling the work before freeing the wiphy.
Fixes: a3ee4dc84c ("wifi: cfg80211: add a work abstraction with special semantics")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250306123626.efd1d19f6e07.I48229f96f4067ef73f5b87302335e2fd750136c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20d5a0b9cd ]
The worker really shouldn't be queued for a non-running interface.
Also, if ieee80211_setup_sdata is called between queueing and executing
the wk, it will be initialized, which will corrupt wiphy_work_list.
Fixes: f8891461a2 ("mac80211: do not start any work during reconfigure flow")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250306123626.1e02caf82640.I4949e71ed56e7186ed4968fa9ddff477473fa2f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 115ef44a98 ]
If kzalloc in gred_init returns a NULL pointer, the code follows the
error handling path, invoking gred_destroy. This, in turn, calls
gred_offload, where memset could receive a NULL pointer as input,
potentially leading to a kernel crash.
When table->opt is NULL in gred_init(), gred_change_table_def()
is not called yet, so it is not necessary to call ->ndo_setup_tc()
in gred_offload().
Signed-off-by: Jun Yang <juny24602@gmail.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Fixes: f25c0515c5 ("net: sched: gred: dynamically allocate tc_gred_qopt_offload")
Link: https://patch.msgid.link/20250305154410.3505642-1-juny24602@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb8286562e ]
The call to flush_work before tearing down a table from the netlink
notifier was supposed to make sure that all earlier updates (e.g. rule
add) that might reference that table have been processed.
Unfortunately, flush_work() waits for the last queued instance.
This could be an instance that is different from the one that we must
wait for.
This is because transactions are protected with a pernet mutex, but the
work item is global, so holding the transaction mutex doesn't prevent
another netns from queueing more work.
Make the work item pernet so that flush_work() will wait for all
transactions queued from this netns.
A welcome side effect is that we no longer need to wait for transaction
objects from foreign netns.
The gc work queue is still global. This seems to be ok because nft_set
structures are reference counted and each container structure owns a
reference on the net namespace.
The destroy_list is still protected by a global spinlock rather than
pernet one but the hold time is very short anyway.
v2: call cancel_work_sync before reaping the remaining tables (Pablo).
Fixes: 9f6958ba2e ("netfilter: nf_tables: unconditionally flush pending work before notifier")
Reported-by: syzbot+5d8c5789c8cb076b2c25@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df08c94baa ]
nf_conncount is supposed to skip garbage collection if it has already
run garbage collection in the same jiffy. Unfortunately, this is broken
when jiffies wrap around which this patch fixes.
The problem is that last_gc in the nf_conncount_list struct is an u32,
but jiffies is an unsigned long which is 8 bytes on my systems. When
those two are compared it only works until last_gc wraps around.
See bug report: https://bugzilla.netfilter.org/show_bug.cgi?id=1778
for more details.
Fixes: d265929930 ("netfilter: nf_conncount: reduce unnecessary GC")
Signed-off-by: Nicklas Bo Jensen <njensen@akamai.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5cfe5612ca ]
nft_ct_pcpu_template is a per-CPU variable and relies on disabled BH for its
locking. The refcounter is read and if its value is set to one then the
refcounter is incremented and variable is used - otherwise it is already
in use and left untouched.
Without per-CPU locking in local_bh_disable() on PREEMPT_RT the
read-then-increment operation is not atomic and therefore racy.
This can be avoided by using unconditionally __refcount_inc() which will
increment counter and return the old value as an atomic operation.
In case the returned counter is not one, the variable is in use and we
need to decrement counter. Otherwise we can use it.
Use __refcount_inc() instead of read and a conditional increment.
Fixes: edee4f1e92 ("netfilter: nft_ct: add zone id set support")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5da15a9c11 ]
Add missing skb_dst_drop() to drop reference to the old dst before
adding the new dst to the skb.
Fixes: 79ff2fc31e ("ila: Cache a route to translated address")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250305081655.19032-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e7633d7b9 ]
This patch follows commit 92191dd107 ("net: ipv6: fix dst ref loops in
rpl, seg6 and ioam6 lwtunnels") and, on a second thought, the same patch
is also needed for ila (even though the config that triggered the issue
was pathological, but still, we don't want that to happen).
Fixes: 79ff2fc31e ("ila: Cache a route to translated address")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250304181039.35951-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c9231ea64 ]
When I read through the TSO codes, I found out that we probably
miss initializing the tx_flags of last seg when TSO is turned
off, which means at the following points no more timestamp
(for this last one) will be generated. There are three flags
to be handled in this patch:
1. SKBTX_HW_TSTAMP
2. SKBTX_BPF
3. SKBTX_SCHED_TSTAMP
Note that SKBTX_BPF[1] was added in 6.14.0-rc2 by commit
6b98ec7e88 ("bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback")
and only belongs to net-next branch material for now. The common
issue of the above three flags can be fixed by this single patch.
This patch initializes the tx_flags to SKBTX_ANY_TSTAMP like what
the UDP GSO does to make the newly segmented last skb inherit the
tx_flags so that requested timestamp will be generated in each
certain layer, or else that last one has zero value of tx_flags
which leads to no timestamp at all.
Fixes: 4ed2d765df ("net-timestamp: TCP timestamping")
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b33a534610 ]
Currently, VLAN devices can be created on top of non-ethernet devices.
Besides the fact that it doesn't make much sense, this also causes a
bug which leaks the address of a kernel function to usermode.
When creating a VLAN device, we initialize GARP (garp_init_applicant)
and MRP (mrp_init_applicant) for the underlying device.
As part of the initialization process, we add the multicast address of
each applicant to the underlying device, by calling dev_mc_add.
__dev_mc_add uses dev->addr_len to determine the length of the new
multicast address.
This causes an out-of-bounds read if dev->addr_len is greater than 6,
since the multicast addresses provided by GARP and MRP are only 6
bytes long.
This behaviour can be reproduced using the following commands:
ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo
ip l set up dev gretest
ip link add link gretest name vlantest type vlan id 100
Then, the following command will display the address of garp_pdu_rcv:
ip maddr show | grep 01:80:c2:00:00:21
Fix the bug by enforcing the type of the underlying device during VLAN
device initialization.
Fixes: 22bedad3ce ("net: convert multicast list to list_head")
Reported-by: syzbot+91161fe81857b396c8a0@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/000000000000ca9a81061a01ec20@google.com/
Signed-off-by: Oscar Maes <oscmaes92@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250303155619.8918-1-oscmaes92@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 637399bf7e ]
ethnl_req_get_phydev() is used to lookup a phy_device, in the case an
ethtool netlink command targets a specific phydev within a netdev's
topology.
It takes as a parameter a const struct nlattr *header that's used for
error handling :
if (!phydev) {
NL_SET_ERR_MSG_ATTR(extack, header,
"no phy matching phyindex");
return ERR_PTR(-ENODEV);
}
In the notify path after a ->set operation however, there's no request
attributes available.
The typical callsite for the above function looks like:
phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_XXX_HEADER],
info->extack);
So, when tb is NULL (such as in the ethnl notify path), we have a nice
crash.
It turns out that there's only the PLCA command that is in that case, as
the other phydev-specific commands don't have a notification.
This commit fixes the crash by passing the cmd index and the nlattr
array separately, allowing NULL-checking it directly inside the helper.
Fixes: c15e065b46 ("net: ethtool: Allow passing a phy index for some commands")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reported-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Link: https://patch.msgid.link/20250301141114.97204-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7a2c1fe6b ]
Introduce support for standardized PHY statistics reporting in ethtool
by extending the PHYLIB framework. Add the functions
phy_ethtool_get_phy_stats() and phy_ethtool_get_link_ext_stats() to
provide a consistent interface for retrieving PHY-level and
link-specific statistics. These functions are used within the ethtool
implementation to avoid direct access to the phy_device structure
outside of the PHYLIB framework.
A new structure, ethtool_phy_stats, is introduced to standardize PHY
statistics such as packet counts, byte counts, and error counters.
Drivers are updated to include callbacks for retrieving PHY and
link-specific statistics, ensuring values are explicitly set only for
supported fields, initialized with ETHTOOL_STAT_NOT_SET to avoid
ambiguity.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 637399bf7e ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe55b1d401 ]
Adapt linkstate_get_sqi() and linkstate_get_sqi_max() to take a
phy_device argument directly, enabling support for setups with
multiple PHYs. The previous assumption of a single PHY attached to
a net_device no longer holds.
Use ethnl_req_get_phydev() to identify the appropriate PHY device
for the operation. Update linkstate_prepare_data() and related
logic to accommodate this change, ensuring compatibility with
multi-PHY configurations.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 637399bf7e ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64e6a754d3 ]
syzbot is able to crash hosts [1], using llc and devices
not supporting IFF_TX_SKB_SHARING.
In this case, e1000 driver calls eth_skb_pad(), while
the skb is shared.
Simply replace skb_get() by skb_clone() in net/llc/llc_s_ac.c
Note that e1000 driver might have an issue with pktgen,
because it does not clear IFF_TX_SKB_SHARING, this is an
orthogonal change.
We need to audit other skb_get() uses in net/llc.
[1]
kernel BUG at net/core/skbuff.c:2178 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 16371 Comm: syz.2.2764 Not tainted 6.14.0-rc4-syzkaller-00052-gac9c34d1e45a #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:pskb_expand_head+0x6ce/0x1240 net/core/skbuff.c:2178
Call Trace:
<TASK>
__skb_pad+0x18a/0x610 net/core/skbuff.c:2466
__skb_put_padto include/linux/skbuff.h:3843 [inline]
skb_put_padto include/linux/skbuff.h:3862 [inline]
eth_skb_pad include/linux/etherdevice.h:656 [inline]
e1000_xmit_frame+0x2d99/0x5800 drivers/net/ethernet/intel/e1000/e1000_main.c:3128
__netdev_start_xmit include/linux/netdevice.h:5151 [inline]
netdev_start_xmit include/linux/netdevice.h:5160 [inline]
xmit_one net/core/dev.c:3806 [inline]
dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3822
sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343
__dev_xmit_skb net/core/dev.c:4045 [inline]
__dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4621
dev_queue_xmit include/linux/netdevice.h:3313 [inline]
llc_sap_action_send_test_c+0x268/0x320 net/llc/llc_s_ac.c:144
llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline]
llc_sap_next_state net/llc/llc_sap.c:182 [inline]
llc_sap_state_process+0x239/0x510 net/llc/llc_sap.c:209
llc_ui_sendmsg+0xd0d/0x14e0 net/llc/af_llc.c:993
sock_sendmsg_nosec net/socket.c:718 [inline]
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+da65c993ae113742a25f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67c020c0.050a0220.222324.0011.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee01b2f2d7 ]
In __udp_gso_segment the skb destructor is removed before segmenting the
skb but the socket reference is kept as-is. This is an issue if the
original skb is later orphaned as we can hit the following bug:
kernel BUG at ./include/linux/skbuff.h:3312! (skb_orphan)
RIP: 0010:ip_rcv_core+0x8b2/0xca0
Call Trace:
ip_rcv+0xab/0x6e0
__netif_receive_skb_one_core+0x168/0x1b0
process_backlog+0x384/0x1100
__napi_poll.constprop.0+0xa1/0x370
net_rx_action+0x925/0xe50
The above can happen following a sequence of events when using
OpenVSwitch, when an OVS_ACTION_ATTR_USERSPACE action precedes an
OVS_ACTION_ATTR_OUTPUT action:
1. OVS_ACTION_ATTR_USERSPACE is handled (in do_execute_actions): the skb
goes through queue_gso_packets and then __udp_gso_segment, where its
destructor is removed.
2. The segments' data are copied and sent to userspace.
3. OVS_ACTION_ATTR_OUTPUT is handled (in do_execute_actions) and the
same original skb is sent to its path.
4. If it later hits skb_orphan, we hit the bug.
Fix this by also removing the reference to the socket in
__udp_gso_segment.
Fixes: ad405857b1 ("udp: better wmem accounting on gso")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250226171352.258045-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 130067e9c1 ]
If there's any vendor-specific element in the subelements
then the outer element parsing must not parse any vendor
element at all. This isn't implemented correctly now due
to parsing into the pointers and then overriding them, so
explicitly skip vendor elements if any exist in the sub-
elements (non-transmitted profile or per-STA profile).
Fixes: 671042a4fb ("mac80211: support non-inheritance element")
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250221112451.fd71e5268840.I9db3e6a3367e6ff38d052d07dc07005f0dd3bd5c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99ca2c28e6 ]
The code is erroneously applying the non-inheritance element
to the inner elements rather than the outer, which is clearly
completely wrong. Fix it by finding the MLE basic element at
the beginning, and then applying the non-inheritance for the
outer parsing.
While at it, do some general cleanups such as not allowing
callers to try looking for a specific non-transmitted BSS
and link at the same time.
Fixes: 45ebac4f05 ("wifi: mac80211: Parse station profile from association response")
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250221112451.b46d42f45b66.If5b95dc3c80208e0c62d8895fb6152aa54b6620b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24711d60f8 ]
Add support for parsing an ML element of type EPCS priority
access, which can optionally be included in EHT protected action
frames used to configure EPCS.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.5afdf65cff46.I0ffa30b40fbad47bc5b608b5fd46047a8c44e904@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: 99ca2c28e6 ("wifi: mac80211: fix MLE non-inheritance parsing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 49f27f2944 upstream.
It is possible to set both MONITOR_FLAG_COOK_FRAMES and MONITOR_FLAG_ACTIVE
flags simultaneously on the same monitor interface from the userspace. This
causes a sub-interface to be created with no IEEE80211_SDATA_IN_DRIVER bit
set because the monitor interface is in the cooked state and it takes
precedence over all other states. When the interface is then being deleted
the kernel calls WARN_ONCE() from check_sdata_in_driver() because of missing
that bit.
Fix this by rejecting MONITOR_FLAG_COOK_FRAMES if it is set along with
other flags.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 66f7ac50ed ("nl80211: Add monitor interface configuration flags")
Cc: stable@vger.kernel.org
Reported-by: syzbot+2e5c1e55b9e5c28a3da7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2e5c1e55b9e5c28a3da7
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Link: https://patch.msgid.link/20250131152657.5606-1-v.shevtsov@mt-integration.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 59b348be75 upstream.
Syzbot keeps reporting an issue [1] that occurs when erroneous symbols
sent from userspace get through into user_alpha2[] via
regulatory_hint_user() call. Such invalid regulatory hints should be
rejected.
While a sanity check from commit 47caf685a6 ("cfg80211: regulatory:
reject invalid hints") looks to be enough to deter these very cases,
there is a way to get around it due to 2 reasons.
1) The way isalpha() works, symbols other than latin lower and
upper letters may be used to determine a country/domain.
For instance, greek letters will also be considered upper/lower
letters and for such characters isalpha() will return true as well.
However, ISO-3166-1 alpha2 codes should only hold latin
characters.
2) While processing a user regulatory request, between
reg_process_hint_user() and regulatory_hint_user() there happens to
be a call to queue_regulatory_request() which modifies letters in
request->alpha2[] with toupper(). This works fine for latin symbols,
less so for weird letter characters from the second part of _ctype[].
Syzbot triggers a warning in is_user_regdom_saved() by first sending
over an unexpected non-latin letter that gets malformed by toupper()
into a character that ends up failing isalpha() check.
Prevent this by enhancing is_an_alpha2() to ensure that incoming
symbols are latin letters and nothing else.
[1] Syzbot report:
------------[ cut here ]------------
Unexpected user alpha2: A�
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 is_user_regdom_saved net/wireless/reg.c:440 [inline]
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_alpha2 net/wireless/reg.c:3424 [inline]
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516
Modules linked in:
CPU: 1 UID: 0 PID: 964 Comm: kworker/1:2 Not tainted 6.12.0-rc5-syzkaller-00044-gc1e939a21eb1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: events_power_efficient crda_timeout_work
RIP: 0010:is_user_regdom_saved net/wireless/reg.c:440 [inline]
RIP: 0010:restore_alpha2 net/wireless/reg.c:3424 [inline]
RIP: 0010:restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516
...
Call Trace:
<TASK>
crda_timeout_work+0x27/0x50 net/wireless/reg.c:542
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f2/0x390 kernel/kthread.c:389
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Reported-by: syzbot+e10709ac3c44f3d4e800@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e10709ac3c44f3d4e800
Fixes: 09d989d179 ("cfg80211: add regulatory hint disconnect support")
Cc: stable@kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250228134659.1577656-1-n.zhandarovich@fintech.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8df010f72 upstream.
Add check for the return value of mgmt_alloc_skb() in
mgmt_device_connected() to prevent null pointer dereference.
Fixes: e96741437e ("Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_CONNECTED")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2176a07e7 upstream.
Add check for the return value of mgmt_alloc_skb() in
mgmt_remote_name() to prevent null pointer dereference.
Fixes: ba17bb62ce ("Bluetooth: Fix skb allocation in mgmt_remote_name() & mgmt_device_connected()")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 022bfe24aa upstream.
If multiple connection requests attempt to create an implicit mptcp
endpoint in parallel, more than one caller may end up in
mptcp_pm_nl_append_new_local_addr because none found the address in
local_addr_list during their call to mptcp_pm_nl_get_local_id. In this
case, the concurrent new_local_addr calls may delete the address entry
created by the previous caller. These deletes use synchronize_rcu, but
this is not permitted in some of the contexts where this function may be
called. During packet recv, the caller may be in a rcu read critical
section and have preemption disabled.
An example stack:
BUG: scheduling while atomic: swapper/2/0/0x00000302
Call Trace:
<IRQ>
dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1))
dump_stack (lib/dump_stack.c:124)
__schedule_bug (kernel/sched/core.c:5943)
schedule_debug.constprop.0 (arch/x86/include/asm/preempt.h:33 kernel/sched/core.c:5970)
__schedule (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:207 kernel/sched/features.h:29 kernel/sched/core.c:6621)
schedule (arch/x86/include/asm/preempt.h:84 kernel/sched/core.c:6804 kernel/sched/core.c:6818)
schedule_timeout (kernel/time/timer.c:2160)
wait_for_completion (kernel/sched/completion.c:96 kernel/sched/completion.c:116 kernel/sched/completion.c:127 kernel/sched/completion.c:148)
__wait_rcu_gp (include/linux/rcupdate.h:311 kernel/rcu/update.c:444)
synchronize_rcu (kernel/rcu/tree.c:3609)
mptcp_pm_nl_append_new_local_addr (net/mptcp/pm_netlink.c:966 net/mptcp/pm_netlink.c:1061)
mptcp_pm_nl_get_local_id (net/mptcp/pm_netlink.c:1164)
mptcp_pm_get_local_id (net/mptcp/pm.c:420)
subflow_check_req (net/mptcp/subflow.c:98 net/mptcp/subflow.c:213)
subflow_v4_route_req (net/mptcp/subflow.c:305)
tcp_conn_request (net/ipv4/tcp_input.c:7216)
subflow_v4_conn_request (net/mptcp/subflow.c:651)
tcp_rcv_state_process (net/ipv4/tcp_input.c:6709)
tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1934)
tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2334)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1))
ip_local_deliver_finish (include/linux/rcupdate.h:813 net/ipv4/ip_input.c:234)
ip_local_deliver (include/linux/netfilter.h:314 include/linux/netfilter.h:308 net/ipv4/ip_input.c:254)
ip_sublist_rcv_finish (include/net/dst.h:461 net/ipv4/ip_input.c:580)
ip_sublist_rcv (net/ipv4/ip_input.c:640)
ip_list_rcv (net/ipv4/ip_input.c:675)
__netif_receive_skb_list_core (net/core/dev.c:5583 net/core/dev.c:5631)
netif_receive_skb_list_internal (net/core/dev.c:5685 net/core/dev.c:5774)
napi_complete_done (include/linux/list.h:37 include/net/gro.h:449 include/net/gro.h:444 net/core/dev.c:6114)
igb_poll (drivers/net/ethernet/intel/igb/igb_main.c:8244) igb
__napi_poll (net/core/dev.c:6582)
net_rx_action (net/core/dev.c:6653 net/core/dev.c:6787)
handle_softirqs (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:588 kernel/softirq.c:427 kernel/softirq.c:636)
irq_exit_rcu (kernel/softirq.c:651)
common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14))
</IRQ>
This problem seems particularly prevalent if the user advertises an
endpoint that has a different external vs internal address. In the case
where the external address is advertised and multiple connections
already exist, multiple subflow SYNs arrive in parallel which tends to
trigger the race during creation of the first local_addr_list entries
which have the internal address instead.
Fix by skipping the replacement of an existing implicit local address if
called via mptcp_pm_nl_get_local_id.
Fixes: d045b9eb95 ("mptcp: introduce implicit endpoints")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250303-net-mptcp-fix-sched-while-atomic-v1-1-f6a216c5a74c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8668860b0a upstream.
Before this patch, if the checksum was not used, the subflow was only
reset if map_data_len was != 0. If there were no MPTCP options or an
invalid mapping, map_data_len was not set to the data len, and then the
subflow was not reset as it should have been, leaving the MPTCP
connection in a wrong fallback mode.
This map_data_len condition has been introduced to handle the reception
of the infinite mapping. Instead, a new dedicated mapping error could
have been returned and treated as a special case. However, the commit
31bf11de14 ("mptcp: introduce MAPPING_BAD_CSUM") has been introduced
by Paolo Abeni soon after, and backported later on to stable. It better
handle the csum case, and it means the exception for valid_csum_seen in
subflow_can_fallback(), plus this one for the infinite mapping in
subflow_check_data_avail(), are no longer needed.
In other words, the code can be simplified there: a fallback should only
be done if msk->allow_infinite_fallback is set. This boolean is set to
false once MPTCP-specific operations acting on the whole MPTCP
connection vs the initial path have been done, e.g. a second path has
been created, or an MPTCP re-injection -- yes, possible even with a
single subflow. The subflow_can_fallback() helper can then be dropped,
and replaced by this single condition.
This also makes the code clearer: a fallback should only be done if it
is possible to do so.
While at it, no need to set map_data_len to 0 in get_mapping_status()
for the infinite mapping case: it will be set to skb->len just after, at
the end of subflow_check_data_avail(), and not read in between.
Fixes: f8d4bcacff ("mptcp: infinite mapping receiving")
Cc: stable@vger.kernel.org
Reported-by: Chester A. Unal <chester.a.unal@xpedite-tech.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/544
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Chester A. Unal <chester.a.unal@xpedite-tech.com>
Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-2-f550f636b435@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 49806fe6e6 ]
In certain cases, napi_get_frags() returns an skb that points to an old
received fragment, This skb may have its skb->ip_summed, csum, and other
fields set from previous fragment handling.
Some network drivers set skb->ip_summed to either CHECKSUM_COMPLETE or
CHECKSUM_UNNECESSARY when getting skb from napi_get_frags(), while
others only set skb->ip_summed when RX checksum offload is enabled on
the device, and do not set any value for skb->ip_summed when hardware
checksum offload is disabled, assuming that the skb->ip_summed
initiated to zero by napi_reuse_skb, ionic driver for example will
ignore/unset any value for the ip_summed filed if HW checksum offload is
disabled, and if we have a situation where the user disables the
checksum offload during a traffic that could lead to the following
errors shown in the kernel logs:
<IRQ>
dump_stack_lvl+0x34/0x48
__skb_gro_checksum_complete+0x7e/0x90
tcp6_gro_receive+0xc6/0x190
ipv6_gro_receive+0x1ec/0x430
dev_gro_receive+0x188/0x360
? ionic_rx_clean+0x25a/0x460 [ionic]
napi_gro_frags+0x13c/0x300
? __pfx_ionic_rx_service+0x10/0x10 [ionic]
ionic_rx_service+0x67/0x80 [ionic]
ionic_cq_service+0x58/0x90 [ionic]
ionic_txrx_napi+0x64/0x1b0 [ionic]
__napi_poll+0x27/0x170
net_rx_action+0x29c/0x370
handle_softirqs+0xce/0x270
__irq_exit_rcu+0xa3/0xc0
common_interrupt+0x80/0xa0
</IRQ>
This inconsistency sometimes leads to checksum validation issues in the
upper layers of the network stack.
To resolve this, this patch clears the skb->ip_summed value for each
reused skb in by napi_reuse_skb(), ensuring that the caller is responsible
for setting the correct checksum status. This eliminates potential
checksum validation issues caused by improper handling of
skb->ip_summed.
Fixes: 76620aafd6 ("gro: New frags interface to avoid copying shinfo")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250225112852.2507709-1-mheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d52da23b6 ]
Recently a bug was discovered where the server had entered TCP_ESTABLISHED
state, but the upper layers were not notified.
The same 5-tuple packet may be processed by different CPUSs, so two
CPUs may receive different ack packets at the same time when the
state is TCP_NEW_SYN_RECV.
In that case, req->ts_recent in tcp_check_req may be changed concurrently,
which will probably cause the newsk's ts_recent to be incorrectly large.
So that tcp_validate_incoming will fail. At this point, newsk will not be
able to enter the TCP_ESTABLISHED.
cpu1 cpu2
tcp_check_req
tcp_check_req
req->ts_recent = rcv_tsval = t1
req->ts_recent = rcv_tsval = t2
syn_recv_sock
tcp_sk(child)->rx_opt.ts_recent = req->ts_recent = t2 // t1 < t2
tcp_child_process
tcp_rcv_state_process
tcp_validate_incoming
tcp_paws_check
if ((s32)(rx_opt->ts_recent - rx_opt->rcv_tsval) <= paws_win)
// t2 - t1 > paws_win, failed
tcp_v4_do_rcv
tcp_rcv_state_process
// TCP_ESTABLISHED
The cpu2's skb or a newly received skb will call tcp_v4_do_rcv to get
the newsk into the TCP_ESTABLISHED state, but at this point it is no
longer possible to notify the upper layer application. A notification
mechanism could be added here, but the fix is more complex, so the
current fix is used.
In tcp_check_req, req->ts_recent is used to assign a value to
tcp_sk(child)->rx_opt.ts_recent, so removing the change in req->ts_recent
and changing tcp_sk(child)->rx_opt.ts_recent directly after owning the
req fixes this bug.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18912c5206 ]
Currently, we report -ETOOSMALL (err) only on the first iteration
(!sent). When we get put_cmsg error after a bunch of successful
put_cmsg calls, we don't signal the error at all. This might be
confusing on the userspace side which will see truncated CMSGs
but no MSG_CTRUNC signal.
Consider the following case:
- sizeof(struct cmsghdr) = 16
- sizeof(struct dmabuf_cmsg) = 24
- total cmsg size (CMSG_LEN) = 40 (16+24)
When calling recvmsg with msg_controllen=60, the userspace
will receive two(!) dmabuf_cmsg(s), the first one will
be a valid one and the second one will be silently truncated. There is no
easy way to discover the truncation besides doing something like
"cm->cmsg_len != CMSG_LEN(sizeof(dmabuf_cmsg))".
Introduce new put_devmem_cmsg wrapper that reports an error instead
of doing the truncation. Mina suggests that it's the intended way
this API should work.
Note that we might now report MSG_CTRUNC when the users (incorrectly)
call us with msg_control == NULL.
Fixes: 8f0b3cc9a4 ("tcp: RX path for devmem TCP")
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250224174401.3582695-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de2c211868 ]
We found an issue when using bpf_redirect with ipvs NAT mode after
commit ff70202b2d ("dev_forward_skb: do not scrub skb mark within
the same name space"). Particularly, we use bpf_redirect to return
the skb directly back to the netif it comes from, i.e., xnet is
false in skb_scrub_packet(), and then ipvs_property is preserved
and SNAT is skipped in the rx path.
ipvs_property has been already cleared when netns is changed in
commit 2b5ec1a5f9 ("netfilter/ipvs: clear ipvs_property flag when
SKB net namespace changed"). This patch just clears it in spite of
netns.
Fixes: 2b5ec1a5f9 ("netfilter/ipvs: clear ipvs_property flag when SKB net namespace changed")
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Link: https://patch.msgid.link/20250222033518.126087-1-lulie@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e863e5db6 ]
Pass a dscp_t variable to ip_route_input(), instead of a plain u8, to
prevent accidental setting of ECN bits in ->flowi4_tos.
Callers of ip_route_input() to consider are:
* input_action_end_dx4_finish() and input_action_end_dt4() in
net/ipv6/seg6_local.c. These functions set the tos parameter to 0,
which is already a valid dscp_t value, so they don't need to be
adjusted for the new prototype.
* icmp_route_lookup(), which already has a dscp_t variable to pass as
parameter. We just need to remove the inet_dscp_to_dsfield()
conversion.
* br_nf_pre_routing_finish(), ip_options_rcv_srr() and ip4ip6_err(),
which get the DSCP directly from IPv4 headers. Define a helper to
read the .tos field of struct iphdr as dscp_t, so that these
function don't have to do the conversion manually.
While there, declare *iph as const in br_nf_pre_routing_finish(),
declare its local variables in reverse-christmas-tree order and move
the "err = ip_route_input()" assignment out of the conditional to avoid
checkpatch warning.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/e9d40781d64d3d69f4c79ac8a008b8d67a033e8d.1727807926.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 27843ce6ba ("ipvlan: ensure network headers are in skb linear part")
Signed-off-by: Sasha Levin <sashal@kernel.org>
