commit aa1ac98268 upstream.
In PMU event initialization functions
- cpumsf_pmu_event_init()
- cpumf_pmu_event_init()
- cfdiag_event_init()
the partially created event had to be removed when an error was detected.
The event::event_init() member function had to release all resources
it allocated in case of error. event::destroy() had to be called
on freeing an event after it was successfully created and
event::event_init() returned success.
With
commit c70ca29803 ("perf/core: Simplify the perf_event_alloc() error path")
this is not necessary anymore. The performance subsystem common
code now always calls event::destroy() to clean up the allocated
resources created during event initialization.
Remove the event::destroy() invocation in PMU event initialization
or that function is called twice for each event that runs into an
error condition in event creation.
This is the kernel log entry which shows up without the fix:
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 43388 at lib/refcount.c:87 refcount_dec_not_one+0x74/0x90
CPU: 0 UID: 0 PID: 43388 Comm: perf Not tainted 6.15.0-20250407.rc1.git0.300.fc41.s390x+git #1 NONE
Hardware name: IBM 3931 A01 704 (LPAR)
Krnl PSW : 0704c00180000000 00000209cb2c1b88 (refcount_dec_not_one+0x78/0x90)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 0000020900000027 0000020900000023 0000000000000026 0000018900000000
00000004a2200a00 0000000000000000 0000000000000057 ffffffffffffffea
00000002b386c600 00000002b3f5b3e0 00000209cc51f140 00000209cc7fc550
0000000001449d38 ffffffffffffffff 00000209cb2c1b84 00000189d67dfb80
Krnl Code: 00000209cb2c1b78: c02000506727 larl %r2,00000209cbcce9c6
00000209cb2c1b7e: c0e5ffbd4431 brasl %r14,00000209caa6a3e0
#00000209cb2c1b84: af000000 mc 0,0
>00000209cb2c1b88: a7480001 lhi %r4,1
00000209cb2c1b8c: ebeff0a00004 lmg %r14,%r15,160(%r15)
00000209cb2c1b92: ec243fbf0055 risbg %r2,%r4,63,191,0
00000209cb2c1b98: 07fe bcr 15,%r14
00000209cb2c1b9a: 47000700 bc 0,1792
Call Trace:
[<00000209cb2c1b88>] refcount_dec_not_one+0x78/0x90
[<00000209cb2c1dc4>] refcount_dec_and_mutex_lock+0x24/0x90
[<00000209caa3c29e>] hw_perf_event_destroy+0x2e/0x80
[<00000209cacaf8b4>] __free_event+0x74/0x270
[<00000209cacb47c4>] perf_event_alloc.part.0+0x4a4/0x730
[<00000209cacbf3e8>] __do_sys_perf_event_open+0x248/0xc20
[<00000209cacc14a4>] __s390x_sys_perf_event_open+0x44/0x50
[<00000209cb8114de>] __do_syscall+0x12e/0x260
[<00000209cb81ce34>] system_call+0x74/0x98
Last Breaking-Event-Address:
[<00000209caa6a4d2>] __warn_printk+0xf2/0x100
---[ end trace 0000000000000000 ]---
Fixes: c70ca29803 ("perf/core: Simplify the perf_event_alloc() error path")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2f29da9f0 upstream.
While debugging kexec/hibernation hangs and crashes, it turned out that
the current implementation of e820__register_nosave_regions() suffers from
multiple serious issues:
- The end of last region is tracked by PFN, causing it to find holes
that aren't there if two consecutive subpage regions are present
- The nosave PFN ranges derived from holes are rounded out (instead of
rounded in) which makes it inconsistent with how explicitly reserved
regions are handled
Fix this by:
- Treating reserved regions as if they were holes, to ensure consistent
handling (rounding out nosave PFN ranges is more correct as the
kernel does not use partial pages)
- Tracking the end of the last RAM region by address instead of pages
to detect holes more precisely
These bugs appear to have been introduced about ~18 years ago with the very
first version of e820_mark_nosave_regions(), and its flawed assumptions were
carried forward uninterrupted through various waves of rewrites and renames.
[ mingo: Added Git archeology details, for kicks and giggles. ]
Fixes: e8eff5ac29 ("[PATCH] Make swsusp avoid memory holes and reserved memory regions on x86_64")
Reported-by: Roberto Ricci <io@r-ricci.it>
Tested-by: Roberto Ricci <io@r-ricci.it>
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250406-fix-e820-nosave-v3-1-f3787bc1ee1d@qtmlabs.xyz
Closes: https://lore.kernel.org/all/Z4WFjBVHpndct7br@desktop0a/
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22cc5ca5de upstream.
CONFIG_PARAVIRT_XXL is mainly defined/used by XEN PV guests. For
other VM guest types, features supported under CONFIG_PARAVIRT
are self sufficient. CONFIG_PARAVIRT mainly provides support for
TLB flush operations and time related operations.
For TDX guest as well, paravirt calls under CONFIG_PARVIRT meets
most of its requirement except the need of HLT and SAFE_HLT
paravirt calls, which is currently defined under
CONFIG_PARAVIRT_XXL.
Since enabling CONFIG_PARAVIRT_XXL is too bloated for TDX guest
like platforms, move HLT and SAFE_HLT paravirt calls under
CONFIG_PARAVIRT.
Moving HLT and SAFE_HLT paravirt calls are not fatal and should not
break any functionality for current users of CONFIG_PARAVIRT.
Fixes: bfe6ed0c67 ("x86/tdx: Add HLT support for TDX guests")
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Ryan Afranji <afranji@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20250228014416.3925664-2-vannapurve@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5951389e5 upstream.
When comparing to the ARM list [1], it appears that several ARM cores
were missing from the lists in spectre_bhb_loop_affected(). Add them.
NOTE: for some of these cores it may not matter since other ways of
clearing the BHB may be used (like the CLRBHB instruction or ECBHB),
but it still seems good to have all the info from ARM's whitepaper
included.
[1] https://developer.arm.com/Arm%20Security%20Center/Spectre-BHB
Fixes: 558c303c97 ("arm64: Mitigate spectre style branch history side channels")
Cc: stable@vger.kernel.org
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20250107120555.v4.5.I4a9a527e03f663040721c5401c41de587d015c82@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 991a20173a upstream.
The kernel build may fail if the linker does not support -no-pie option,
as it always included in LDFLAGS_vmlinux.
Error log:
s390-linux-ld: unable to disambiguate: -no-pie (did you mean --no-pie ?)
Although the GNU linker defaults to -no-pie, the ability to explicitly
specify this option was introduced in binutils 2.36.
Hence, fix it by adding -no-pie to LDFLAGS_vmlinux only when it is
available.
Cc: stable@vger.kernel.org
Fixes: 00cda11d3b ("s390: Compile kernel with -fPIC and link with -no-pie")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503220342.T3fElO9L-lkp@intel.com/
Suggested-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8691abd3af upstream.
For non-VFs, zpci_bus_is_isolated_vf() should return false because they
aren't VFs. While zpci_iov_find_parent_pf() specifically checks if
a function is a VF, it then simply returns that there is no parent. The
simplistic check for a parent then leads to these functions being
confused with isolated VFs and isolating them on their own domain even
if sibling PFs should share the domain.
Fix this by explicitly checking if a function is not a VF. Note also
that at this point the case where RIDs are ignored is already handled
and in this case all PCI functions get isolated by being detected in
zpci_bus_is_multifunction_root().
Cc: stable@vger.kernel.org
Fixes: 2844ddbd54 ("s390/pci: Fix handling of isolated VFs")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef01cac401 upstream.
Acquire a lock on kvm->srcu when userspace is getting MP state to handle a
rather extreme edge case where "accepting" APIC events, i.e. processing
pending INIT or SIPI, can trigger accesses to guest memory. If the vCPU
is in L2 with INIT *and* a TRIPLE_FAULT request pending, then getting MP
state will trigger a nested VM-Exit by way of ->check_nested_events(), and
emuating the nested VM-Exit can access guest memory.
The splat was originally hit by syzkaller on a Google-internal kernel, and
reproduced on an upstream kernel by hacking the triple_fault_event_test
selftest to stuff a pending INIT, store an MSR on VM-Exit (to generate a
memory access on VMX), and do vcpu_mp_state_get() to trigger the scenario.
=============================
WARNING: suspicious RCU usage
6.14.0-rc3-b112d356288b-vmx/pi_lockdep_false_pos-lock #3 Not tainted
-----------------------------
include/linux/kvm_host.h:1058 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by triple_fault_ev/1256:
#0: ffff88810df5a330 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x8b/0x9a0 [kvm]
stack backtrace:
CPU: 11 UID: 1000 PID: 1256 Comm: triple_fault_ev Not tainted 6.14.0-rc3-b112d356288b-vmx #3
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x7f/0x90
lockdep_rcu_suspicious+0x144/0x190
kvm_vcpu_gfn_to_memslot+0x156/0x180 [kvm]
kvm_vcpu_read_guest+0x3e/0x90 [kvm]
read_and_check_msr_entry+0x2e/0x180 [kvm_intel]
__nested_vmx_vmexit+0x550/0xde0 [kvm_intel]
kvm_check_nested_events+0x1b/0x30 [kvm]
kvm_apic_accept_events+0x33/0x100 [kvm]
kvm_arch_vcpu_ioctl_get_mpstate+0x30/0x1d0 [kvm]
kvm_vcpu_ioctl+0x33e/0x9a0 [kvm]
__x64_sys_ioctl+0x8b/0xb0
do_syscall_64+0x6c/0x170
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250401150504.829812-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc52ae0a70 upstream.
Explicitly zero/empty-initialize the unions used for PMU related CPUID
entries, instead of manually zeroing all fields (hopefully), or in the
case of 0x80000022, relying on the compiler to clobber the uninitialized
bitfields.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-ID: <20250315024102.2361628-1-seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4392813bb upstream.
Currently on book3s-hv, the capability KVM_CAP_SPAPR_TCE_VFIO is only
available for KVM Guests running on PowerNV and not for the KVM guests
running on pSeries hypervisors. This prevents a pSeries L2 guest from
leveraging the in-kernel acceleration for H_PUT_TCE_INDIRECT and
H_STUFF_TCE hcalls that results in slow startup times for large memory
guests.
Support for VFIO on pSeries was restored in commit f431a8cde7
("powerpc/iommu: Reimplement the iommu_table_group_ops for pSeries"),
making it possible to re-enable this capability on pSeries hosts.
This change enables KVM_CAP_SPAPR_TCE_VFIO for nested PAPR guests on
pSeries, while maintaining the existing behavior on PowerNV. Booting an
L2 guest with 128GB of memory shows an average 11% improvement in
startup time.
Fixes: f431a8cde7 ("powerpc/iommu: Reimplement the iommu_table_group_ops for pSeries")
Cc: stable@vger.kernel.org
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250220070002.1478849-1-amachhiw@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87af633689 upstream.
PVH dom0 re-uses logic from PV dom0, in which RAM ranges not assigned to
dom0 are re-used as scratch memory to map foreign and grant pages. Such
logic relies on reporting those unpopulated ranges as RAM to Linux, and
mark them as reserved. This way Linux creates the underlying page
structures required for metadata management.
Such approach works fine on PV because the initial balloon target is
calculated using specific Xen data, that doesn't take into account the
memory type changes described above. However on HVM and PVH the initial
balloon target is calculated using get_num_physpages(), and that function
does take into account the unpopulated RAM regions used as scratch space
for remote domain mappings.
This leads to PVH dom0 having an incorrect initial balloon target, which
causes malfunction (excessive memory freeing) of the balloon driver if the
dom0 memory target is later adjusted from the toolstack.
Fix this by using xen_released_pages to account for any pages that are part
of the memory map, but are already unpopulated when the balloon driver is
initialized. This accounts for any regions used for scratch remote
mappings. Note on x86 xen_released_pages definition is moved to
enlighten.c so it's uniformly available for all Xen-enabled builds.
Take the opportunity to unify PV with PVH/HVM guests regarding the usage of
get_num_physpages(), as that avoids having to add different logic for PV vs
PVH in both balloon_add_regions() and arch_xen_unpopulated_init().
Much like a6aa4eb994, the code in this changeset should have been part of
38620fc4e8.
Fixes: a6aa4eb994 ('xen/x86: add extra pages to unpopulated-alloc if available')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250407082838.65495-1-roger.pau@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb61ad14c4 upstream.
With commit 1a10a44dfc ("sparc64: implement the new page table range
API") set_ptes was added to the sparc architecture. The implementation
included calling arch_enter/leave_lazy_mmu() calls.
The patch removes the usage of arch_enter/leave_lazy_mmu() since this
implies nesting of lazy mmu regions which is not supported. Without this
fix, lazy mmu mode is effectively disabled because we exit the mode after
the first set_ptes:
remap_pte_range()
-> arch_enter_lazy_mmu()
-> set_ptes()
-> arch_enter_lazy_mmu()
-> arch_leave_lazy_mmu()
-> arch_leave_lazy_mmu()
Powerpc suffered the same problem and fixed it in a corresponding way with
commit 47b8def935 ("powerpc/mm: Avoid calling
arch_enter/leave_lazy_mmu() in set_ptes").
Link: https://lkml.kernel.org/r/20250303141542.3371656-5-ryan.roberts@arm.com
Fixes: 1a10a44dfc ("sparc64: implement the new page table range API")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juegren Gross <jgross@suse.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1d416bf9f upstream.
Since commit 38e0edb15b ("mm/apply_to_range: call pte function with lazy
updates") it's been possible for arch_[enter|leave]_lazy_mmu_mode() to be
called without holding a page table lock (for the kernel mappings case),
and therefore it is possible that preemption may occur while in the lazy
mmu mode. The Sparc lazy mmu implementation is not robust to preemption
since it stores the lazy mode state in a per-cpu structure and does not
attempt to manage that state on task switch.
Powerpc had the same issue and fixed it by explicitly disabling preemption
in arch_enter_lazy_mmu_mode() and re-enabling in
arch_leave_lazy_mmu_mode(). See commit b9ef323ea1 ("powerpc/64s:
Disable preemption in hash lazy mmu mode").
Given Sparc's lazy mmu mode is based on powerpc's, let's fix it in the
same way here.
Link: https://lkml.kernel.org/r/20250303141542.3371656-4-ryan.roberts@arm.com
Fixes: 38e0edb15b ("mm/apply_to_range: call pte function with lazy updates")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juegren Gross <jgross@suse.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46ad360020 upstream.
The MT8173 disp-pwm device should have only one compatible string, based
on the following DT validation error:
arch/arm64/boot/dts/mediatek/mt8173-elm.dtb: pwm@1401e000: compatible: 'oneOf' conditional failed, one must be fixed:
['mediatek,mt8173-disp-pwm', 'mediatek,mt6595-disp-pwm'] is too long
'mediatek,mt8173-disp-pwm' is not one of ['mediatek,mt6795-disp-pwm', 'mediatek,mt8167-disp-pwm']
'mediatek,mt8173-disp-pwm' is not one of ['mediatek,mt8186-disp-pwm', 'mediatek,mt8188-disp-pwm', 'mediatek,mt8192-disp-pwm', 'mediatek,mt8195-disp-pwm', 'mediatek,mt8365-disp-pwm']
'mediatek,mt8173-disp-pwm' was expected
'mediatek,mt8183-disp-pwm' was expected
from schema $id: http://devicetree.org/schemas/pwm/mediatek,pwm-disp.yaml#
arch/arm64/boot/dts/mediatek/mt8173-elm.dtb: pwm@1401f000: compatible: 'oneOf' conditional failed, one must be fixed:
['mediatek,mt8173-disp-pwm', 'mediatek,mt6595-disp-pwm'] is too long
'mediatek,mt8173-disp-pwm' is not one of ['mediatek,mt6795-disp-pwm', 'mediatek,mt8167-disp-pwm']
'mediatek,mt8173-disp-pwm' is not one of ['mediatek,mt8186-disp-pwm', 'mediatek,mt8188-disp-pwm', 'mediatek,mt8192-disp-pwm', 'mediatek,mt8195-disp-pwm', 'mediatek,mt8365-disp-pwm']
'mediatek,mt8173-disp-pwm' was expected
'mediatek,mt8183-disp-pwm' was expected
from schema $id: http://devicetree.org/schemas/pwm/mediatek,pwm-disp.yaml#
Drop the extra "mediatek,mt6595-disp-pwm" compatible string.
Fixes: 61aee93425 ("arm64: dts: mt8173: add MT8173 display PWM driver support node")
Cc: YH Huang <yh.huang@mediatek.com>
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250108083424.2732375-2-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89f43e1ce6 upstream.
Hotplugged memory can be smaller than the original memory. For example,
on my target:
root@genericarmv8:~# cat /sys/kernel/debug/memblock/memory
0: 0x0000000064005000..0x0000000064023fff 0 NOMAP
1: 0x0000000064400000..0x00000000647fffff 0 NOMAP
2: 0x0000000068000000..0x000000006fffffff 0 DRV_MNG
3: 0x0000000088800000..0x0000000094ffefff 0 NONE
4: 0x0000000094fff000..0x0000000094ffffff 0 NOMAP
max_pfn will affect read_page_owner. Therefore, it should first compare and
then select the larger value for max_pfn.
Fixes: 8fac67ca23 ("arm64: mm: update max_pfn after memory hotplug")
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250321070019.1271859-1-quic_zhenhuah@quicinc.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb8a3ad25f upstream.
As per the Orin Nano Dev Kit schematic, GPIO_G.02 is not available
on this device family. It should not be used at all on Orin NX/Nano.
Having this unused pin mapped as the suspend key can lead to
unpredictable behavior for low power modes.
Orin NX/Nano uses GPIO_EE.04 as both a "power" button and a "suspend"
button. However, we cannot have two gpio-keys mapped to the same
GPIO. Therefore remove the "suspend" key.
Cc: stable@vger.kernel.org
Fixes: e63472eda5 ("arm64: tegra: Support Jetson Orin NX reference platform")
Signed-off-by: Ninad Malwade <nmalwade@nvidia.com>
Signed-off-by: Ivy Huang <yijuh@nvidia.com>
Link: https://lore.kernel.org/r/20250206224034.3691397-1-yijuh@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a13bfa4fe0 upstream.
The source register is not used for SET* and reading it can result in
a UBSAN out-of-bounds array access error, specifically when the MOPS
exception is taken from a SET* sequence with XZR (reg 31) as the
source. Architecturally this is the only case where a src/dst/size
field in the ESR can be reported as 31.
Prior to 2de451a329 the code in do_el0_mops() was benign as the
use of pt_regs_read_reg() prevented the out-of-bounds access.
Fixes: 2de451a329 ("KVM: arm64: Add handler for MOPS exceptions")
Cc: <stable@vger.kernel.org> # 6.12.x
Cc: Kristina Martsenko <kristina.martsenko@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Keir Fraser <keirf@google.com>
Reviewed-by: Kristina Martšenko <kristina.martsenko@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250326110448.3792396-1-keirf@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 250f25367b upstream.
If kvm_arch_vcpu_create() fails to share the vCPU page with the
hypervisor, we propagate the error back to the ioctl but leave the
vGIC vCPU data initialised. Note only does this leak the corresponding
memory when the vCPU is destroyed but it can also lead to use-after-free
if the redistributor device handling tries to walk into the vCPU.
Add the missing cleanup to kvm_arch_vcpu_create(), ensuring that the
vGIC vCPU structures are destroyed on error.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250314133409.9123-1-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c9fc6e652 upstream.
Qualcomm has confirmed that, much like Cortex A53 and A55, KRYO
2XX/3XX/4XX silver cores are unaffected by Spectre BHB. Add them to
the safe list.
Fixes: 558c303c97 ("arm64: Mitigate spectre style branch history side channels")
Cc: stable@vger.kernel.org
Cc: Scott Bauer <sbauer@quicinc.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Trilok Soni <quic_tsoni@quicinc.com>
Link: https://lore.kernel.org/r/20250107120555.v4.3.Iab8dbfb5c9b1e143e7a29f410bce5f9525a0ba32@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e403e85383 upstream.
The code for detecting CPUs that are vulnerable to Spectre BHB was
based on a hardcoded list of CPU IDs that were known to be affected.
Unfortunately, the list mostly only contained the IDs of standard ARM
cores. The IDs for many cores that are minor variants of the standard
ARM cores (like many Qualcomm Kyro CPUs) weren't listed. This led the
code to assume that those variants were not affected.
Flip the code on its head and instead assume that a core is vulnerable
if it doesn't have CSV2_3 but is unrecognized as being safe. This
involves creating a "Spectre BHB safe" list.
As of right now, the only CPU IDs added to the "Spectre BHB safe" list
are ARM Cortex A35, A53, A55, A510, and A520. This list was created by
looking for cores that weren't listed in ARM's list [1] as per review
feedback on v2 of this patch [2]. Additionally Brahma A53 is added as
per mailing list feedback [3].
NOTE: this patch will not actually _mitigate_ anyone, it will simply
cause them to report themselves as vulnerable. If any cores in the
system are reported as vulnerable but not mitigated then the whole
system will be reported as vulnerable though the system will attempt
to mitigate with the information it has about the known cores.
[1] https://developer.arm.com/Arm%20Security%20Center/Spectre-BHB
[2] https://lore.kernel.org/r/20241219175128.GA25477@willie-the-truck
[3] https://lore.kernel.org/r/18dbd7d1-a46c-4112-a425-320c99f67a8d@broadcom.com
Fixes: 558c303c97 ("arm64: Mitigate spectre style branch history side channels")
Cc: stable@vger.kernel.org
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250107120555.v4.2.I2040fa004dafe196243f67ebcc647cbedbb516e6@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed1ce84124 upstream.
Qualcomm Kryo 400-series Gold cores have a derivative of an ARM Cortex
A76 in them. Since A76 needs Spectre mitigation via looping then the
Kyro 400-series Gold cores also need Spectre mitigation via looping.
Qualcomm has confirmed that the proper "k" value for Kryo 400-series
Gold cores is 24.
Fixes: 558c303c97 ("arm64: Mitigate spectre style branch history side channels")
Cc: stable@vger.kernel.org
Cc: Scott Bauer <sbauer@quicinc.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Trilok Soni <quic_tsoni@quicinc.com>
Link: https://lore.kernel.org/r/20250107120555.v4.1.Ie4ef54abe02e7eb0eee50f830575719bf23bda48@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 41a0926e82 ]
The s390 MMIO syscalls when using the classic PCI instructions do not
cause a page fault when follow_pfnmap_start() fails due to the page not
being present. Besides being a general deficiency this breaks vfio-pci's
mmap() handling once VFIO_PCI_MMAP gets enabled as this lazily maps on
first access. Fix this by following a failed follow_pfnmap_start() with
fixup_user_page() and retrying the follow_pfnmap_start(). Also fix
a VM_READ vs VM_WRITE mixup in the read syscall.
Link: https://lore.kernel.org/r/20250226-vfio_pci_mmap-v7-1-c5c0f1d26efd@linux.ibm.com
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4248ee16f ]
When running in a virtual machine, we might see the original hardware CPU
vendor string (i.e. "AuthenticAMD"), but a model and family ID set by the
hypervisor. In case we run on AMD hardware and the hypervisor sets a model
ID < 0x14, the LAHF cpu feature is eliminated from the the list of CPU
capabilities present to circumvent a bug with some BIOSes in conjunction with
AMD K8 processors.
Parsing the flags list from /proc/cpuinfo seems to be happening mostly in
bash scripts and prebuilt Docker containers, as it does not need to have
additionals tools present – even though more reliable ways like using "kcpuid",
which calls the CPUID instruction instead of parsing a list, should be preferred.
Scripts, that use /proc/cpuinfo to determine if the current CPU is
"compliant" with defined microarchitecture levels like x86-64-v2 will falsely
claim the CPU is incapable of modern CPU instructions when "lahf_lm" is missing
in that flags list.
This can prevent some docker containers from starting or build scripts to create
unoptimized binaries.
Admittably, this is more a small inconvenience than a severe bug in the kernel
and the shoddy scripts that rely on parsing /proc/cpuinfo
should be fixed instead.
This patch adds an additional check to see if we're running inside a
virtual machine (X86_FEATURE_HYPERVISOR is present), which, to my
understanding, can't be present on a real K8 processor as it was introduced
only with the later/other Athlon64 models.
Example output with the "lahf_lm" flag missing in the flags list
(should be shown between "hypervisor" and "abm"):
$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 6
model name : Common KVM processor
stepping : 1
microcode : 0x1000065
cpu MHz : 2599.998
cache size : 512 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx rdtscp
lm rep_good nopl cpuid extd_apicid tsc_known_freq pni
pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt
tsc_deadline_timer aes xsave avx f16c hypervisor abm
3dnowprefetch vmmcall bmi1 avx2 bmi2 xsaveopt
... while kcpuid shows the feature to be present in the CPU:
# kcpuid -d | grep lahf
lahf_lm - LAHF/SAHF available in 64-bit mode
[ mingo: Updated the comment a bit, incorporated Boris's review feedback. ]
Signed-off-by: Max Grobecker <max@grobecker.info>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad546940b5 ]
The first GDT descriptor is reserved as 'NULL descriptor'. As bits 0
and 1 of a segment selector, i.e., the RPL bits, are NOT used to index
GDT, selector values 0~3 all point to the NULL descriptor, thus values
0, 1, 2 and 3 are all valid NULL selector values.
When a NULL selector value is to be loaded into a segment register,
reload_segments() sets its RPL bits. Later IRET zeros ES, FS, GS, and
DS segment registers if any of them is found to have any nonzero NULL
selector value. The two operations offset each other to actually effect
a nop.
Besides, zeroing of RPL in NULL selector values is an information leak
in pre-FRED systems as userspace can spot any interrupt/exception by
loading a nonzero NULL selector, and waiting for it to become zero.
But there is nothing software can do to prevent it before FRED.
ERETU, the only legit instruction to return to userspace from kernel
under FRED, by design does NOT zero any segment register to avoid this
problem behavior.
As such, leave NULL selector values 0~3 unchanged and close the leak.
Do the same on 32-bit kernel as well.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241126184529.1607334-1-xin@zytor.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6762467a0 ]
GCC < 14.2 does not correctly propagate address space qualifiers
with -fsanitize=bool,enum. Together with address sanitizer then
causes that load to be sanitized.
Disable named address spaces for GCC < 14.2 when both, UBSAN_BOOL
and KASAN are enabled.
Reported-by: Matt Fleming <matt@readmodwrite.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250227140715.2276353-1-ubizjak@gmail.com
Closes: https://lore.kernel.org/lkml/20241213190119.3449103-1-matt@readmodwrite.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1fcf41cf3 ]
The bit pattern of _PAGE_DIRTY set and _PAGE_RW clear is used to mark
shadow stacks. This is currently checked for in mk_pte() but not
pfn_pte(). If we add the check to pfn_pte(), it catches vfree()
calling set_direct_map_invalid_noflush() which calls
__change_page_attr() which loads the old protection bits from the
PTE, clears the specified bits and uses pfn_pte() to construct the
new PTE.
We should, therefore, for kernel mappings, clear the _PAGE_DIRTY bit
consistently whenever we clear _PAGE_RW. I opted to do it in the
callers in case we want to use __change_page_attr() to create shadow
stacks inside the kernel at some point in the future. Arguably, we
might also want to clear _PAGE_ACCESSED here.
Note that the 3 functions involved:
__set_pages_np()
kernel_map_pages_in_pgd()
kernel_unmap_pages_in_pgd()
Only ever manipulate non-swappable kernel mappings, so maintaining
the DIRTY:1|RW:0 special pattern for shadow stacks and DIRTY:0
pattern for non-shadow-stack entries can be maintained consistently
and doesn't result in the unintended clearing of a live dirty bit
that could corrupt (destroy) dirty bit information for user mappings.
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/174051422675.10177.13226545170101706336.tip-bot2@tip-bot2
Closes: https://lore.kernel.org/oe-lkp/202502241646.719f4651-lkp@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b37357a78 ]
Xen disables ACPI for PV guests in DomU, which causes acpi_mps_check() to
return 1 when CONFIG_X86_MPPARSE is not set. As a result, the local APIC is
disabled and the guest is later limited to a single vCPU, despite being
configured with more.
This regression was introduced in version 6.9 in commit 7c0edad364
("x86/cpu/topology: Rework possible CPU management"), which added an
early check that limits CPUs to 1 if apic_is_disabled.
Update the acpi_mps_check() logic to return 0 early when running as a Xen
PV guest in DomU, preventing APIC from being disabled in this specific case
and restoring correct multi-vCPU behaviour.
Fixes: 7c0edad364 ("x86/cpu/topology: Rework possible CPU management")
Signed-off-by: Petr Vaněk <arkamar@atlas.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250407132445.6732-2-arkamar@atlas.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e7607f7d6d upstream.
ld.lld prior to 21.0.0 does not support using the KEEP keyword within an
overlay description, which may be needed to avoid discarding necessary
sections within an overlay with '--gc-sections', which can be enabled
for the kernel via CONFIG_LD_DEAD_CODE_DATA_ELIMINATION.
Disallow CONFIG_LD_DEAD_CODE_DATA_ELIMINATION without support for KEEP
within OVERLAY and introduce a macro, OVERLAY_KEEP, that can be used to
conditionally add KEEP when it is properly supported to avoid breaking
old versions of ld.lld.
Cc: stable@vger.kernel.org
Link: 381599f1fe
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[nathan: Fix conflict in init/Kconfig due to lack of RUSTC symbols]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d26638bfcd upstream.
If KVM rejects an AP Creation event, leave the target vCPU state as-is.
Nothing in the GHCB suggests the hypervisor is *allowed* to muck with vCPU
state on failure, let alone required to do so. Furthermore, kicking only
in the !ON_INIT case leads to divergent behavior, and even the "kick" case
is non-deterministic.
E.g. if an ON_INIT request fails, the guest can successfully retry if the
fixed AP Creation request is made prior to sending INIT. And if a !ON_INIT
fails, the guest can successfully retry if the fixed AP Creation request is
handled before the target vCPU processes KVM's
KVM_REQ_UPDATE_PROTECTED_GUEST_STATE.
Fixes: e366f92ea9 ("KVM: SEV: Support SEV-SNP AP Creation NAE event")
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3d944a367 upstream.
Without this, the vectors are removed if LD_DEAD_CODE_DATA_ELIMINATION
is enabled. At startup, the CPU (silently) hangs in the undefined
instruction exception as soon as the first timer interrupt arrives.
On my setup, the system also boots fine without the 2nd and 3rd KEEP()
statements, so I cannot tell whether these are actually required.
[nathan: Use OVERLAY_KEEP() to avoid breaking old ld.lld versions]
Cc: stable@vger.kernel.org
Fixes: ed0f941022 ("ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ef938c350 upstream.
On the following path, flush_tlb_range() can be used for zapping normal
PMD entries (PMD entries that point to page tables) together with the PTE
entries in the pointed-to page table:
collapse_pte_mapped_thp
pmdp_collapse_flush
flush_tlb_range
The arm64 version of flush_tlb_range() has a comment describing that it can
be used for page table removal, and does not use any last-level
invalidation optimizations. Fix the X86 version by making it behave the
same way.
Currently, X86 only uses this information for the following two purposes,
which I think means the issue doesn't have much impact:
- In native_flush_tlb_multi() for checking if lazy TLB CPUs need to be
IPI'd to avoid issues with speculative page table walks.
- In Hyper-V TLB paravirtualization, again for lazy TLB stuff.
The patch "x86/mm: only invalidate final translations with INVLPGB" which
is currently under review (see
<https://lore.kernel.org/all/20241230175550.4046587-13-riel@surriel.com/>)
would probably be making the impact of this a lot worse.
Fixes: 016c4d92cd ("x86/mm/tlb: Add freed_tables argument to flush_tlb_mm_range")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250103-x86-collapse-flush-fix-v1-1-3c521856cfa6@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d90c9de9de upstream.
TSC could be reset in deep ACPI sleep states, even with invariant TSC.
That's the reason we have sched_clock() save/restore functions, to deal
with this situation. But what happens is that such functions are guarded
with a check for the stability of sched_clock - if not considered stable,
the save/restore routines aren't executed.
On top of that, we have a clear comment in native_sched_clock() saying
that *even* with TSC unstable, we continue using TSC for sched_clock due
to its speed.
In other words, if we have a situation of TSC getting detected as unstable,
it marks the sched_clock as unstable as well, so subsequent S3 sleep cycles
could bring bogus sched_clock values due to the lack of the save/restore
mechanism, causing warnings like this:
[22.954918] ------------[ cut here ]------------
[22.954923] Delta way too big! 18446743750843854390 ts=18446744072977390405 before=322133536015 after=322133536015 write stamp=18446744072977390405
[22.954923] If you just came from a suspend/resume,
[22.954923] please switch to the trace global clock:
[22.954923] echo global > /sys/kernel/tracing/trace_clock
[22.954923] or add trace_clock=global to the kernel command line
[22.954937] WARNING: CPU: 2 PID: 5728 at kernel/trace/ring_buffer.c:2890 rb_add_timestamp+0x193/0x1c0
Notice that the above was reproduced even with "trace_clock=global".
The fix for that is to _always_ save/restore the sched_clock on suspend
cycle _if TSC is used_ as sched_clock - only if we fallback to jiffies
the sched_clock_stable() check becomes relevant to save/restore the
sched_clock.
Debugged-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250215210314.351480-1-gpiccoli@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ac43f2be9 upstream.
An older cleanup of mine inadvertently removed geode-gx1 and geode-lx
from the list of CPUs that are known to support a working cmpxchg8b.
Fixes: 88a2b4edda ("x86/Kconfig: Rework CONFIG_X86_PAE dependency")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250226213714.4040853-2-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa6192adc3 upstream.
Jann reported a possible issue when trampoline_check_ip returns
address near the bottom of the address space that is allowed to
call into the syscall if uretprobes are not set up:
https://lore.kernel.org/bpf/202502081235.5A6F352985@keescook/T/#m9d416df341b8fbc11737dacbcd29f0054413cbbf
Though the mmap minimum address restrictions will typically prevent
creating mappings there, let's make sure uretprobe syscall checks
for that.
Fixes: ff474a78ce ("uprobe: Add uretprobe syscall to speed up return probe")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250212220433.3624297-1-jolsa@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9bdf1f953 upstream.
The WARN_ON(this_cpu_read(cpu_hw_events.enabled)) in the
intel_pmu_save_and_restart_reload() is triggered, when sampling read
topdown events.
In a NMI handler, the cpu_hw_events.enabled is set and used to indicate
the status of core PMU. The generic pmu->pmu_disable_count, updated in
the perf_pmu_disable/enable pair, is not touched.
However, the perf_pmu_disable/enable pair is invoked when sampling read
in a NMI handler. The cpuc->enabled is mistakenly set by the
perf_pmu_enable().
Avoid disabling PMU if the core PMU is already disabled.
Merge the logic together.
Fixes: 7b2c05a15d ("perf/x86/intel: Generic support for hardware TopDown metrics")
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250121152303.3128733-2-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 314dfe1057 upstream.
The x86_pmu_drain_pebs static call was introduced in commit 7c9903c9bf
("x86/perf, static_call: Optimize x86_pmu methods"), but it's not really
used to replace the old method.
Apply the static call for drain_pebs.
Fixes: 7c9903c9bf ("x86/perf, static_call: Optimize x86_pmu methods")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250121152303.3128733-1-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f98a4f4e7 upstream.
Direct HLT instruction execution causes #VEs for TDX VMs which is routed
to hypervisor via TDCALL. If HLT is executed in STI-shadow, resulting #VE
handler will enable interrupts before TDCALL is routed to hypervisor
leading to missed wakeup events, as current TDX spec doesn't expose
interruptibility state information to allow #VE handler to selectively
enable interrupts.
Commit bfe6ed0c67 ("x86/tdx: Add HLT support for TDX guests")
prevented the idle routines from executing HLT instruction in STI-shadow.
But it missed the paravirt routine which can be reached via this path
as an example:
kvm_wait() =>
safe_halt() =>
raw_safe_halt() =>
arch_safe_halt() =>
irq.safe_halt() =>
pv_native_safe_halt()
To reliably handle arch_safe_halt() for TDX VMs, introduce explicit
dependency on CONFIG_PARAVIRT and override paravirt halt()/safe_halt()
routines with TDX-safe versions that execute direct TDCALL and needed
interrupt flag updates. Executing direct TDCALL brings in additional
benefit of avoiding HLT related #VEs altogether.
As tested by Ryan Afranji:
"Tested with the specjbb2015 benchmark. It has heavy lock contention which leads
to many halt calls. TDX VMs suffered a poor score before this patchset.
Verified the major performance improvement with this patchset applied."
Fixes: bfe6ed0c67 ("x86/tdx: Add HLT support for TDX guests")
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Ryan Afranji <afranji@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250228014416.3925664-3-vannapurve@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a15bb8303 upstream.
Patch series "mm/hwpoison: Fix regressions in memory failure handling",
v4.
## 1. What am I trying to do:
This patchset resolves two critical regressions related to memory failure
handling that have appeared in the upstream kernel since version 5.17, as
compared to 5.10 LTS.
- copyin case: poison found in user page while kernel copying from user space
- instr case: poison found while instruction fetching in user space
## 2. What is the expected outcome and why
- For copyin case:
Kernel can recover from poison found where kernel is doing get_user() or
copy_from_user() if those places get an error return and the kernel return
-EFAULT to the process instead of crashing. More specifily, MCE handler
checks the fixup handler type to decide whether an in kernel #MC can be
recovered. When EX_TYPE_UACCESS is found, the PC jumps to recovery code
specified in _ASM_EXTABLE_FAULT() and return a -EFAULT to user space.
- For instr case:
If a poison found while instruction fetching in user space, full recovery
is possible. User process takes #PF, Linux allocates a new page and fills
by reading from storage.
## 3. What actually happens and why
- For copyin case: kernel panic since v5.17
Commit 4c132d1d84 ("x86/futex: Remove .fixup usage") introduced a new
extable fixup type, EX_TYPE_EFAULT_REG, and later patches updated the
extable fixup type for copy-from-user operations, changing it from
EX_TYPE_UACCESS to EX_TYPE_EFAULT_REG. It breaks previous EX_TYPE_UACCESS
handling when posion found in get_user() or copy_from_user().
- For instr case: user process is killed by a SIGBUS signal due to #CMCI
and #MCE race
When an uncorrected memory error is consumed there is a race between the
CMCI from the memory controller reporting an uncorrected error with a UCNA
signature, and the core reporting and SRAR signature machine check when
the data is about to be consumed.
### Background: why *UN*corrected errors tied to *C*MCI in Intel platform [1]
Prior to Icelake memory controllers reported patrol scrub events that
detected a previously unseen uncorrected error in memory by signaling a
broadcast machine check with an SRAO (Software Recoverable Action
Optional) signature in the machine check bank. This was overkill because
it's not an urgent problem that no core is on the verge of consuming that
bad data. It's also found that multi SRAO UCE may cause nested MCE
interrupts and finally become an IERR.
Hence, Intel downgrades the machine check bank signature of patrol scrub
from SRAO to UCNA (Uncorrected, No Action required), and signal changed to
#CMCI. Just to add to the confusion, Linux does take an action (in
uc_decode_notifier()) to try to offline the page despite the UC*NA*
signature name.
### Background: why #CMCI and #MCE race when poison is consuming in
Intel platform [1]
Having decided that CMCI/UCNA is the best action for patrol scrub errors,
the memory controller uses it for reads too. But the memory controller is
executing asynchronously from the core, and can't tell the difference
between a "real" read and a speculative read. So it will do CMCI/UCNA if
an error is found in any read.
Thus:
1) Core is clever and thinks address A is needed soon, issues a
speculative read.
2) Core finds it is going to use address A soon after sending the read
request
3) The CMCI from the memory controller is in a race with MCE from the
core that will soon try to retire the load from address A.
Quite often (because speculation has got better) the CMCI from the memory
controller is delivered before the core is committed to the instruction
reading address A, so the interrupt is taken, and Linux offlines the page
(marking it as poison).
## Why user process is killed for instr case
Commit 046545a661 ("mm/hwpoison: fix error page recovered but reported
"not recovered"") tries to fix noise message "Memory error not recovered"
and skips duplicate SIGBUSs due to the race. But it also introduced a bug
that kill_accessing_process() return -EHWPOISON for instr case, as result,
kill_me_maybe() send a SIGBUS to user process.
# 4. The fix, in my opinion, should be:
- For copyin case:
The key point is whether the error context is in a read from user memory.
We do not care about the ex-type if we know its a MOV reading from
userspace.
is_copy_from_user() return true when both of the following two checks are
true:
- the current instruction is copy
- source address is user memory
If copy_user is true, we set
m->kflags |= MCE_IN_KERNEL_COPYIN | MCE_IN_KERNEL_RECOV;
Then do_machine_check() will try fixup_exception() first.
- For instr case: let kill_accessing_process() return 0 to prevent a SIGBUS.
- For patch 3:
The return value of memory_failure() is quite important while discussed
instr case regression with Tony and Miaohe for patch 2, so add comment
about the return value.
This patch (of 3):
Commit 4c132d1d84 ("x86/futex: Remove .fixup usage") introduced a new
extable fixup type, EX_TYPE_EFAULT_REG, and commit 4c132d1d84
("x86/futex: Remove .fixup usage") updated the extable fixup type for
copy-from-user operations, changing it from EX_TYPE_UACCESS to
EX_TYPE_EFAULT_REG. The error context for copy-from-user operations no
longer functions as an in-kernel recovery context. Consequently, the
error context for copy-from-user operations no longer functions as an
in-kernel recovery context, resulting in kernel panics with the message:
"Machine check: Data load in unrecoverable area of kernel."
To address this, it is crucial to identify if an error context involves a
read operation from user memory. The function is_copy_from_user() can be
utilized to determine:
- the current operation is copy
- when reading user memory
When these conditions are met, is_copy_from_user() will return true,
confirming that it is indeed a direct copy from user memory. This check
is essential for correctly handling the context of errors in these
operations without relying on the extable fixup types that previously
allowed for in-kernel recovery.
So, use is_copy_from_user() to determine if a context is copy user directly.
Link: https://lkml.kernel.org/r/20250312112852.82415-1-xueshuai@linux.alibaba.com
Link: https://lkml.kernel.org/r/20250312112852.82415-2-xueshuai@linux.alibaba.com
Fixes: 4c132d1d84 ("x86/futex: Remove .fixup usage")
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Tony Luck <tony.luck@intel.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Ruidong Tian <tianruidong@linux.alibaba.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31ab12df72 upstream.
When verify_sha256_digest() fails, __apply_microcode_amd() should propagate
the failure by returning false (and not -1 which is promoted to true).
Fixes: 50cef76d5c ("x86/microcode/AMD: Load only SHA256-checksummed patches")
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250327230503.1850368-2-boris.ostrovsky@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74c1807f6c upstream.
KVM_CAP_SYNC_REGS does not make sense for VMs with protected guest state,
since the register values cannot actually be written. Return 0
when using the VM-level KVM_CHECK_EXTENSION ioctl, and accordingly
return -EINVAL from KVM_RUN if the valid/dirty fields are nonzero.
However, on exit from KVM_RUN userspace could have placed a nonzero
value into kvm_run->kvm_valid_regs, so check guest_state_protected
again and skip store_regs() in that case.
Cc: stable@vger.kernel.org
Fixes: 517987e3fb ("KVM: x86: add fields to struct kvm_arch for CoCo features")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250306202923.646075-1-pbonzini@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e792d843aa upstream.
snp_set_vmsa() returns 0 as success result and so fix it.
Cc: stable@vger.kernel.org
Fixes: 44676bb9d5 ("x86/hyperv: Add smp support for SEV-SNP guest")
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250313085217.45483-1-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250313085217.45483-1-ltykernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52266f1015 upstream.
Vincent reported that running XDP synproxy program on LoongArch results
in the following error:
JIT doesn't support bpf-to-bpf calls
With dmesg:
multi-func JIT bug 1391 != 1390
The root cause is that verifier will refill the imm with the correct
addresses of bpf_calls for BPF_PSEUDO_FUNC instructions and then run
the last pass of JIT. So we generate different JIT code for the same
instruction in two passes (one for placeholder and the other for the
real address). Let's use move_addr() instead.
See commit 64f50f6575 ("LoongArch, bpf: Use 4 instructions for
function address in JIT") for a similar fix.
Cc: stable@vger.kernel.org
Fixes: 69c087ba62 ("bpf: Add bpf_for_each_map_elem() helper")
Fixes: bb035ef0cc ("LoongArch: BPF: Support mixing bpf2bpf and tailcalls")
Reported-by: Vincent Li <vincent.mc.li@gmail.com>
Tested-by: Vincent Li <vincent.mc.li@gmail.com>
Closes: https://lore.kernel.org/loongarch/CAK3+h2yfM9FTNiXvEQBkvtuoJrvzmN4c_NZsFXqEk4Cj1tsBNA@mail.gmail.com/T/#u
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 60f3caff14 upstream.
The verifier test `calls: div by 0 in subprog` triggers a panic at the
ld.bu instruction. The ld.bu insn is trying to load byte from memory
address returned by the subprog. The subprog actually set the correct
address at the a5 register (dedicated register for BPF return values).
But at commit 73c359d1d3 ("LoongArch: BPF: Sign-extend return values")
we also sign extended a5 to the a0 register (return value in LoongArch).
For function call insn, we later propagate the a0 register back to a5
register. This is right for native calls but wrong for bpf2bpf calls
which expect zero-extended return value in a5 register. So only move a0
to a5 for native calls (i.e. non-BPF_PSEUDO_CALL).
Cc: stable@vger.kernel.org
Fixes: 73c359d1d3 ("LoongArch: BPF: Sign-extend return values")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e2586991e upstream.
Vincent reported that running BPF progs with tailcalls on LoongArch
causes kernel hard lockup. Debugging the issues shows that the JITed
image missing a jirl instruction at the end of the epilogue.
There are two passes in JIT compiling, the first pass set the flags and
the second pass generates JIT code based on those flags. With BPF progs
mixing bpf2bpf and tailcalls, build_prologue() generates N insns in the
first pass and then generates N+1 insns in the second pass. This makes
epilogue_offset off by one and we will jump to some unexpected insn and
cause lockup. Fix this by inserting a nop insn.
Cc: stable@vger.kernel.org
Fixes: 5dc615520c ("LoongArch: Add BPF JIT support")
Fixes: bb035ef0cc ("LoongArch: BPF: Support mixing bpf2bpf and tailcalls")
Reported-by: Vincent Li <vincent.mc.li@gmail.com>
Tested-by: Vincent Li <vincent.mc.li@gmail.com>
Closes: https://lore.kernel.org/loongarch/CAK3+h2w6WESdBN3UCr3WKHByD7D6Q_Ve1EDAjotVrnx6Or_c8g@mail.gmail.com/
Closes: https://lore.kernel.org/bpf/CAK3+h2woEjG_N=-XzqEGaAeCmgu2eTCUc7p6bP4u8Q+DFHm-7g@mail.gmail.com/
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec105cadff upstream.
Begin with Loongson-3C6000, the number of PCI host can be as many as
8 for multi-chip machines, and this number should be the same for I/O
interrupt controllers. To support these machines we also increase the
MAX_IO_PICS up to 8.
Cc: stable@vger.kernel.org
Tested-by: Mingcong Bai <baimingcong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4103cfe9dc upstream.
ARCH_DMA_MINALIGN is 1 by default, but some LoongArch-specific devices
(such as APBDMA) require 16 bytes alignment. When the data buffer length
is too small, the hardware may make an error writing cacheline. Thus, it
is dangerous to allocate a small memory buffer for DMA. It's always safe
to define ARCH_DMA_MINALIGN as L1_CACHE_BYTES but unnecessary (kmalloc()
need small memory objects). Therefore, just increase it to 16.
Cc: stable@vger.kernel.org
Tested-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3f7023171d ]
When a crashkernel is launched on RISC-V, the entry to purgatory is
done by trapping via the stvec CSR. From riscv_kexec_norelocate():
| ...
| /*
| * Switch to physical addressing
| * This will also trigger a jump to CSR_STVEC
| * which in this case is the address of the new
| * kernel.
| */
| csrw CSR_STVEC, a2
| csrw CSR_SATP, zero
stvec requires that the address is 4B aligned, which was not the case,
e.g.:
| Loaded purgatory at 0xffffc000
| kexec_file: kexec_file_load: type:1, start:0xffffd232 head:0x4 flags:0x6
The address 0xffffd232 not 4B aligned.
Correct by adding proper function alignment.
With this change, crashkernels loaded with kexec-file will be able to
properly enter the purgatory.
Fixes: 736e30af58 ("RISC-V: Add purgatory")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250328085313.1193815-1-bjorn@kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
