commit fa37a88496 upstream.
Frag allocators, such as netdev_alloc_frag(), were not designed to
work for fragsz > PAGE_SIZE.
So, switch to page pool for jumbo frames instead of using page frag
allocators. This driver is using page pool for smaller MTUs already.
Cc: stable@vger.kernel.org
Fixes: 80f6215b45 ("net: mana: Add support for jumbo frame")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://patch.msgid.link/1742920357-27263-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15970e1b23 upstream.
When the tx tail is less than the head (in cases of wraparound), the TX
consumed descriptor statistic in DQ will be reported as
UINT32_MAX - head + tail, which is incorrect. Mask the difference of
head and tail according to the ring size when reporting the statistic.
Cc: stable@vger.kernel.org
Fixes: 2c9198356d ("gve: Add consumed counts to ethtool stats")
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250402001037.2717315-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7dcea6fe33 upstream.
The mt7925 chip is only support a single radio, so the maximum
number of simultaneous should be 0.
Fixes: 86c051f2c4 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Cc: stable@vger.kernel.org
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Caleb Jorden <cjorden@gmail.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250305000851.493671-3-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bada9b0a2 upstream.
When the p2p device and MLO station are running concurrently, the p2p device
will occupy the wrong link_idx when the MLO secondary link is added.
Fixes: 9e4c3a007f ("wifi: mt76: connac: Extend mt76_connac_mcu_uni_add_dev for MLO")
Cc: stable@vger.kernel.org
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Caleb Jorden <cjorden@gmail.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250305000851.493671-2-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6458d760a0 upstream.
Due to the increase in the number of power tables for 6Ghz on CLC,
the variable nr_country is no longer sufficient to represent the
total quantity. Therefore, we have switched to calculating the
length of clc buf to obtain the correct power table.
Cc: stable@vger.kernel.org
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250116062131.3860198-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ae45b1f69 upstream.
Align the format of "struct mt7925_wow_pattern_tlv" with
firmware to ensure proper functionality.
Cc: stable@vger.kernel.org
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250116055925.3856856-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bc1da524b upstream.
Add check for the return value of devm_kstrdup() in
mt76_get_of_data_from_mtd() to catch potential exception.
Fixes: e7a6a044f9 ("mt76: testmode: move mtd part to mt76_dev")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Link: https://patch.msgid.link/20250219033645.2594753-1-haoxiang_li2024@163.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52fdc41c32 upstream.
Fix internal PHYs definition for the 6320 family, which has only 2
internal PHYs (on ports 3 and 4).
Fixes: bc3931557d ("net: dsa: mv88e6xxx: Add number of internal PHYs")
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: <stable@vger.kernel.org> # 6.6.x
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250317173250.28780-7-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ebc8e1ef9 upstream.
Implement the workaround for erratum
3.3 RGMII timing may be out of spec when transmit delay is enabled
for the 6320 family, which says:
When transmit delay is enabled via Port register 1 bit 14 = 1, duty
cycle may be out of spec. Under very rare conditions this may cause
the attached device receive CRC errors.
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: <stable@vger.kernel.org> # 5.4.x
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250317173250.28780-8-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 06cccc2ebb ]
The TP-Link TL-WDN6200 "Driverless" version cards use a MT7612U chipset.
Add the USB ID to mt76x2u driver.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Link: https://patch.msgid.link/20250317102235.1421726-1-uwu@icenowy.me
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a07f23ad9b ]
Lenovo ThinkPad Hybrid USB-C with USB-A Dock (17ef:a359) is affected by
the same problem as the Lenovo Powered USB-C Travel Hub (17ef:721e):
Both are based on the Realtek RTL8153B chip used to use the cdc_ether
driver. However, using this driver, with the system suspended the device
constantly sends pause-frames as soon as the receive buffer fills up.
This causes issues with other devices, where some Ethernet switches stop
forwarding packets altogether.
Using the Realtek driver (r8152) fixes this issue. Pause frames are no
longer sent while the host system is suspended.
Cc: Leon Schuermann <leon@is.currently.online>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Oliver Neukum <oliver@neukum.org> (maintainer:USB CDC ETHERNET DRIVER)
Cc: netdev@vger.kernel.org (open list:NETWORKING DRIVERS)
Link: https://git.kernel.org/netdev/net/c/cb82a54904a9
Link: https://git.kernel.org/netdev/net/c/2284bbd0cf39
Link: https://www.lenovo.com/de/de/p/accessories-and-software/docking/docking-usb-docks/40af0135eu
Signed-off-by: Philipp Hahn <phahn-oss@avm.de>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/484336aad52d14ccf061b535bc19ef6396ef5120.1741601523.git.p.hahn@avm.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05ec5c085e ]
Add quirk for a copper SFP that identifies itself as "FS" "SFP-10GM-T".
It uses RollBall protocol to talk to the PHY and needs 4 sec wait before
probing the PHY.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://patch.msgid.link/20250227071058.1520027-1-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a0dddfb30 ]
In certain cases, hardware might provide packets with a
length greater than the maximum native Wi-Fi header length.
This can lead to accessing and modifying fields in the header
within the ath12k_dp_rx_h_undecap_nwifi function for
DP_RX_DECAP_TYPE_NATIVE_WIFI decap type and
potentially resulting in invalid data access and memory corruption.
Add a sanity check before processing the SKB to prevent invalid
data access in the undecap native Wi-Fi function for the
DP_RX_DECAP_TYPE_NATIVE_WIFI decap type.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Manish Dharanenthiran <quic_mdharane@quicinc.com>
Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com>
Link: https://patch.msgid.link/20250211090302.4105141-1-tamizh.raja@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a850355610 ]
The OEM SFP-2.5G-BX10-D/U SFP module pair is meant to operate with
2500Base-X. However, in their EEPROM they incorrectly specify:
Transceiver codes : 0x00 0x12 0x00 0x00 0x12 0x00 0x01 0x05 0x00
BR, Nominal : 2500MBd
Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway.
Tested on BananaPi R3.
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/20250218-b4-lkmsub-v1-1-1e51dcabed90@birger-koblitz.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8503a4b1a2 ]
Add device type data for S32G2/S32G3 SoC.
FlexCAN module from S32G2/S32G3 is similar with i.MX SoCs, but interrupt
management is different.
On S32G2/S32G3 SoC, there are separate interrupts for state change, bus
errors, Mailboxes 0-7 and Mailboxes 8-127 respectively.
In order to handle this FlexCAN hardware particularity, first reuse the
'FLEXCAN_QUIRK_NR_IRQ_3' quirk provided by mcf5441x's irq handling
support. Secondly, use the newly introduced
'FLEXCAN_QUIRK_SECONDARY_MB_IRQ' quirk which handles the case where two
separate mailbox ranges are controlled by independent hardware interrupt
lines.
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Link: https://patch.msgid.link/20250113120704.522307-4-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c652cf030 ]
Introduce 'FLEXCAN_QUIRK_SECONDARY_MB_IRQ' quirk to handle a FlexCAN
hardware module integration particularity where two ranges of mailboxes
are controlled by separate hardware interrupt lines.
The same 'flexcan_irq' handler is used for both separate mailbox interrupt
lines, with no other changes.
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250113120704.522307-3-ciprianmarian.costea@oss.nxp.com
[mkl: flexcan_open(): change order and free irq_secondary_mb first]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4079918ae7 ]
The FiberGecko is a small USB module that connects a 100 Mbit/s SFP
Signed-off-by: Max Schulze <max.schulze@online.de>
Tested-by: Max Schulze <max.schulze@online.de>
Suggested-by: David Hollis <dhollis@davehollis.com>
Reported-by: Sven Kreiensen <s.kreiensen@lyconsys.com>
Link: https://patch.msgid.link/20250212150957.43900-2-max.schulze@online.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63fdc4509b ]
Currently, ath12k_dp_mon_srng_process uses ath12k_hal_srng_src_get_next_entry
to fetch the next entry from the destination ring. This is incorrect because
ath12k_hal_srng_src_get_next_entry is intended for source rings, not destination
rings. This leads to invalid entry fetches, causing potential data corruption or
crashes due to accessing incorrect memory locations. This happens because the
source ring and destination ring have different handling mechanisms and using
the wrong function results in incorrect pointer arithmetic and ring management.
To fix this issue, replace the call to ath12k_hal_srng_src_get_next_entry with
ath12k_hal_srng_dst_get_next_entry in ath12k_dp_mon_srng_process. This ensures
that the correct function is used for fetching entries from the destination
ring, preventing invalid memory accesses.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Link: https://patch.msgid.link/20241223060132.3506372-7-quic_ppranees@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b24394ed5 ]
Kmemleak reported this error:
unreferenced object 0xffff1c165cec3060 (size 32):
comm "insmod", pid 560, jiffies 4296964570 (age 235.596s)
backtrace:
[<000000005434db68>] __kmem_cache_alloc_node+0x1f4/0x2c0
[<000000001203b155>] kmalloc_trace+0x40/0x88
[<0000000028adc9c8>] _request_firmware+0xb8/0x608
[<00000000cad1aef7>] firmware_request_nowarn+0x50/0x80
[<000000005011a682>] local_pci_probe+0x48/0xd0
[<00000000077cd295>] pci_device_probe+0xb4/0x200
[<0000000087184c94>] really_probe+0x150/0x2c0
The firmware memory was allocated in ath12k_pci_probe(), but not
freed in ath12k_pci_remove() in case ATH12K_FLAG_QMI_FAIL bit is
set. So call ath12k_fw_unmap() to free the memory.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.2.0-02280-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250123080226.1116479-1-quic_miaoqing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efb24b1f0d ]
The firmware memory was allocated in ath11k_pci_probe() or
ath11k_ahb_probe(), but not freed in ath11k_xxx_remove() in case
ATH11K_FLAG_QMI_FAIL bit is set. So call ath11k_fw_destroy() to
free the memory.
Found while fixing the same problem in ath12k:
https://lore.kernel.org/linux-wireless/20240314012746.2729101-1-quic_miaoqing@quicinc.com
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04546-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250123084948.1124357-1-quic_miaoqing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bcd209818 ]
Currently, the driver allocates cacheable DMA buffers for rings like
HAL_REO_DST and HAL_WBM2SW_RELEASE. The buffers for HAL_WBM2SW_RELEASE
are large (1024 KiB), exceeding the SWIOTLB slot size of 256 KiB. This
leads to "swiotlb buffer is full" error messages on systems without an
IOMMU that use SWIOTLB, causing driver initialization failures. The driver
calls dma_map_single() with these large buffers obtained from kzalloc(),
resulting in ring initialization errors on systems without an IOMMU that
use SWIOTLB.
To address these issues, replace the flawed buffer allocation mechanism
with the appropriate DMA API. Specifically, use dma_alloc_noncoherent()
for cacheable DMA buffers, ensuring proper freeing of buffers with
dma_free_noncoherent().
Error log:
[ 10.194343] ath11k_pci 0000:04:00.0: swiotlb buffer is full (sz:1048583 bytes), total 32768 (slots), used 2529 (slots)
[ 10.194406] ath11k_pci 0000:04:00.0: failed to set up tcl_comp ring (0) :-12
[ 10.194781] ath11k_pci 0000:04:00.0: failed to init DP: -12
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Reported-by: Tim Harvey <tharvey@gateworks.com>
Closes: https://lore.kernel.org/all/20241210041133.GA17116@lst.de/
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Link: https://patch.msgid.link/20250119164219.647059-2-quic_ppranees@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aabc6596ff ]
Ensure we have enough data in linear buffer from skb before accessing
initial bytes. This prevents potential out-of-bounds accesses
when processing short packets.
When ppp_sync_txmung receives an incoming package with an empty
payload:
(remote) gef➤ p *(struct pppoe_hdr *) (skb->head + skb->network_header)
$18 = {
type = 0x1,
ver = 0x1,
code = 0x0,
sid = 0x2,
length = 0x0,
tag = 0xffff8880371cdb96
}
from the skb struct (trimmed)
tail = 0x16,
end = 0x140,
head = 0xffff88803346f400 "4",
data = 0xffff88803346f416 ":\377",
truesize = 0x380,
len = 0x0,
data_len = 0x0,
mac_len = 0xe,
hdr_len = 0x0,
it is not safe to access data[2].
Reported-by: syzbot+29fc8991b0ecb186cf40@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=29fc8991b0ecb186cf40
Tested-by: syzbot+29fc8991b0ecb186cf40@syzkaller.appspotmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Arnaud Lecomte <contact@arnaud-lcm.com>
Link: https://patch.msgid.link/20250408-bound-checking-ppp_txmung-v2-1-94bb6e1b92d0@arnaud-lcm.com
[pabeni@redhat.com: fixed subj typo]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc75ea20ff ]
DSA has 2 kinds of drivers:
1. Those who call dsa_switch_suspend() and dsa_switch_resume() from
their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz
2. Those who don't: all others. The above methods should be optional.
For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(),
and dsa_switch_resume() calls dsa_user_resume() -> phylink_start().
These seem good candidates for setting mac_managed_pm = true because
that is essentially its definition [1], but that does not seem to be the
biggest problem for now, and is not what this change focuses on.
Talking strictly about the 2nd category of DSA drivers here (which
do not have MAC managed PM, meaning that for their attached PHYs,
mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full),
I have noticed that the following warning from mdio_bus_phy_resume() is
triggered:
WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY &&
phydev->state != PHY_UP);
because the PHY state machine is running.
It's running as a result of a previous dsa_user_open() -> ... ->
phylink_start() -> phy_start() having been initiated by the user.
The previous mdio_bus_phy_suspend() was supposed to have called
phy_stop_machine(), but it didn't. So this is why the PHY is in state
PHY_NOLINK by the time mdio_bus_phy_resume() runs.
mdio_bus_phy_suspend() did not call phy_stop_machine() because for
phylink, the phydev->adjust_link function pointer is NULL. This seems a
technicality introduced by commit fddd91016d ("phylib: fix PAL state
machine restart on resume"). That commit was written before phylink
existed, and was intended to avoid crashing with consumer drivers which
don't use the PHY state machine - phylink always does, when using a PHY.
But phylink itself has historically not been developed with
suspend/resume in mind, and apparently not tested too much in that
scenario, allowing this bug to exist unnoticed for so long. Plus, prior
to the WARN_ON(), it would have likely been invisible.
This issue is not in fact restricted to type 2 DSA drivers (according to
the above ad-hoc classification), but can be extrapolated to any MAC
driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where
the issue was reported. Assuming mac_managed_pm is set correctly, a
quick search indicates the following other drivers might be affected:
$ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm
drivers/net/ethernet/atheros/ag71xx.c
drivers/net/ethernet/microchip/sparx5/sparx5_main.c
drivers/net/ethernet/microchip/lan966x/lan966x_main.c
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
drivers/net/ethernet/freescale/ucc_geth.c
drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
drivers/net/ethernet/marvell/mvneta.c
drivers/net/ethernet/marvell/prestera/prestera_main.c
drivers/net/ethernet/mediatek/mtk_eth_soc.c
drivers/net/ethernet/altera/altera_tse_main.c
drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
drivers/net/ethernet/meta/fbnic/fbnic_phylink.c
drivers/net/ethernet/tehuti/tn40_phy.c
drivers/net/ethernet/mscc/ocelot_net.c
Make the existing conditions dependent on the PHY device having a
phydev->phy_link_change() implementation equal to the default
phy_link_change() provided by phylib. Otherwise, we implicitly know that
the phydev has the phylink-provided phylink_phy_change() callback, and
when phylink is used, the PHY state machine always needs to be stopped/
started on the suspend/resume path. The code is structured as such that
if phydev->phy_link_change() is absent, it is a matter of time until the
kernel will crash - no need to further complicate the test.
Thus, for the situation where the PM is not managed by the MAC, we will
make the MDIO bus PM ops treat identically the phylink-controlled PHYs
with the phylib-controlled PHYs where an adjust_link() callback is
supplied. In both cases, the MDIO bus PM ops should stop and restart the
PHY state machine.
[1] https://lore.kernel.org/netdev/Z-1tiW9zjcoFkhwc@shell.armlinux.org.uk/
Fixes: 744d23c71a ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Reported-by: Wei Fang <wei.fang@nxp.com>
Tested-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250407094042.2155633-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f40a673d6b ]
In an upcoming change, mdio_bus_phy_may_suspend() will need to
distinguish a phylib-based PHY client from a phylink PHY client.
For that, it will need to compare the phydev->phy_link_change() function
pointer with the eponymous phy_link_change() provided by phylib.
To avoid forward function declarations, the default PHY link state
change method should be moved upwards. There is no functional change
associated with this patch, it is only to reduce the noise from a real
bug fix.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250407093900.2155112-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: fc75ea20ff ("net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f1ff1b38a ]
page_pool_dev_alloc_pages could return NULL. There was a WARN_ON(!page)
but it would still proceed to use the NULL pointer and then crash.
This is similar to commit 001ba09020
("net: fec: handle page_pool_dev_alloc_pages error").
This is found by our static analysis tool KNighter.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Fixes: 3c47e8ae11 ("net: libwx: Support to receive packets in NAPI")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250407184952.2111299-1-chenyuan0y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7db94734e ]
The current code configures the Physical Function (PF) root node at TL1
and the Virtual Function (VF) root node at TL2.
This ensure at any given point of time PF traffic gets more priority.
PF root node
TL1
/ \
TL2 TL2 VF root node
/ \
TL3 TL3
/ \
TL4 TL4
/ \
SMQ SMQ
Due to a bug in the current code, the TL2 parent queue index on the
VF interface is not being configured, leading to 'SMQ Flush' errors
Fixes: 5e6808b4c6 ("octeontx2-pf: Add support for HTB offload")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407070341.2765426-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b4ea6fdfc0 upstream.
The code for handling ACPI configuration in CLC was copied from the mt7921
driver but is not utilized in the mt7925 implementation. So removes the
unused functionality to clean up the codebase.
Cc: stable@vger.kernel.org
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250304113649.867387-4-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49717ef01c upstream.
The sizeof(struct napi_struct) can change. Don't hardcode the size to
400 bytes and instead use "sizeof(struct napi_struct)".
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241004105407.73585-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Yifei: In Linux-6.12.y, it still hard code the size of napi_struct,
adding a member will lead the entire build failed]
Signed-off-by: Yifei Liu <yifei.l.liu@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51de360009 upstream.
Missing usbnet_going_away Check in Critical Path.
The usb_submit_urb function lacks a usbnet_going_away
validation, whereas __usbnet_queue_skb includes this check.
This inconsistency creates a race condition where:
A URB request may succeed, but the corresponding SKB data
fails to be queued.
Subsequent processes:
(e.g., rx_complete → defer_bh → __skb_unlink(skb, list))
attempt to access skb->next, triggering a NULL pointer
dereference (Kernel Panic).
Fixes: 04e906839a ("usbnet: fix cyclical race on disconnect with work queue")
Cc: stable@vger.kernel.org
Signed-off-by: Ying Lu <luying1@xiaomi.com>
Link: https://patch.msgid.link/4c9ef2efaa07eb7f9a5042b74348a67e5a3a7aea.1743584159.git.luying1@xiaomi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 053f3ff67d ]
v2:
- Created a single error handling unlock and exit in veth_pool_store
- Greatly expanded commit message with previous explanatory-only text
Summary: Use rtnl_mutex to synchronize veth_pool_store with itself,
ibmveth_close and ibmveth_open, preventing multiple calls in a row to
napi_disable.
Background: Two (or more) threads could call veth_pool_store through
writing to /sys/devices/vio/30000002/pool*/*. You can do this easily
with a little shell script. This causes a hang.
I configured LOCKDEP, compiled ibmveth.c with DEBUG, and built a new
kernel. I ran this test again and saw:
Setting pool0/active to 0
Setting pool1/active to 1
[ 73.911067][ T4365] ibmveth 30000002 eth0: close starting
Setting pool1/active to 1
Setting pool1/active to 0
[ 73.911367][ T4366] ibmveth 30000002 eth0: close starting
[ 73.916056][ T4365] ibmveth 30000002 eth0: close complete
[ 73.916064][ T4365] ibmveth 30000002 eth0: open starting
[ 110.808564][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification.
[ 230.808495][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification.
[ 243.683786][ T123] INFO: task stress.sh:4365 blocked for more than 122 seconds.
[ 243.683827][ T123] Not tainted 6.14.0-01103-g2df0c02dab82-dirty #8
[ 243.683833][ T123] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 243.683838][ T123] task:stress.sh state:D stack:28096 pid:4365 tgid:4365 ppid:4364 task_flags:0x400040 flags:0x00042000
[ 243.683852][ T123] Call Trace:
[ 243.683857][ T123] [c00000000c38f690] [0000000000000001] 0x1 (unreliable)
[ 243.683868][ T123] [c00000000c38f840] [c00000000001f908] __switch_to+0x318/0x4e0
[ 243.683878][ T123] [c00000000c38f8a0] [c000000001549a70] __schedule+0x500/0x12a0
[ 243.683888][ T123] [c00000000c38f9a0] [c00000000154a878] schedule+0x68/0x210
[ 243.683896][ T123] [c00000000c38f9d0] [c00000000154ac80] schedule_preempt_disabled+0x30/0x50
[ 243.683904][ T123] [c00000000c38fa00] [c00000000154dbb0] __mutex_lock+0x730/0x10f0
[ 243.683913][ T123] [c00000000c38fb10] [c000000001154d40] napi_enable+0x30/0x60
[ 243.683921][ T123] [c00000000c38fb40] [c000000000f4ae94] ibmveth_open+0x68/0x5dc
[ 243.683928][ T123] [c00000000c38fbe0] [c000000000f4aa20] veth_pool_store+0x220/0x270
[ 243.683936][ T123] [c00000000c38fc70] [c000000000826278] sysfs_kf_write+0x68/0xb0
[ 243.683944][ T123] [c00000000c38fcb0] [c0000000008240b8] kernfs_fop_write_iter+0x198/0x2d0
[ 243.683951][ T123] [c00000000c38fd00] [c00000000071b9ac] vfs_write+0x34c/0x650
[ 243.683958][ T123] [c00000000c38fdc0] [c00000000071bea8] ksys_write+0x88/0x150
[ 243.683966][ T123] [c00000000c38fe10] [c0000000000317f4] system_call_exception+0x124/0x340
[ 243.683973][ T123] [c00000000c38fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec
...
[ 243.684087][ T123] Showing all locks held in the system:
[ 243.684095][ T123] 1 lock held by khungtaskd/123:
[ 243.684099][ T123] #0: c00000000278e370 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x50/0x248
[ 243.684114][ T123] 4 locks held by stress.sh/4365:
[ 243.684119][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150
[ 243.684132][ T123] #1: c000000041aea888 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0
[ 243.684143][ T123] #2: c0000000366fb9a8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0
[ 243.684155][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_enable+0x30/0x60
[ 243.684166][ T123] 5 locks held by stress.sh/4366:
[ 243.684170][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150
[ 243.684183][ T123] #1: c00000000aee2288 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0
[ 243.684194][ T123] #2: c0000000366f4ba8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0
[ 243.684205][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_disable+0x30/0x60
[ 243.684216][ T123] #4: c0000003ff9bbf18 (&rq->__lock){-.-.}-{2:2}, at: __schedule+0x138/0x12a0
From the ibmveth debug, two threads are calling veth_pool_store, which
calls ibmveth_close and ibmveth_open. Here's the sequence:
T4365 T4366
----------------- ----------------- ---------
veth_pool_store veth_pool_store
ibmveth_close
ibmveth_close
napi_disable
napi_disable
ibmveth_open
napi_enable <- HANG
ibmveth_close calls napi_disable at the top and ibmveth_open calls
napi_enable at the top.
https://docs.kernel.org/networking/napi.html]] says
The control APIs are not idempotent. Control API calls are safe
against concurrent use of datapath APIs but an incorrect sequence of
control API calls may result in crashes, deadlocks, or race
conditions. For example, calling napi_disable() multiple times in a
row will deadlock.
In the normal open and close paths, rtnl_mutex is acquired to prevent
other callers. This is missing from veth_pool_store. Use rtnl_mutex in
veth_pool_store fixes these hangs.
Signed-off-by: Dave Marquardt <davemarq@linux.ibm.com>
Fixes: 860f242eb5 ("[PATCH] ibmveth change buffer pools dynamically")
Reviewed-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250402154403.386744-1-davemarq@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fda8c491db ]
devm_kasprintf() returns NULL when memory allocation fails. Currently,
com20020pci_probe() does not check for this case, which results in a
NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue and ensure
no resources are left allocated.
Fixes: 6b17a597fc ("arcnet: restoring support for multiple Sohard Arcnet cards")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://patch.msgid.link/20250402135036.44697-1-bsdhenrymartin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a58d882841 ]
The mv88e6xxx has an internal PPU that polls PHY state. If we want to
access the internal PHYs, we need to disable the PPU first. Because
that is a slow operation, a 10ms timer is used to re-enable it,
canceled with every access, so bulk operations effectively only
disable it once and re-enable it some 10ms after the last access.
If a PHY is accessed and then the mv88e6xxx module is removed before
the 10ms are up, the PPU re-enable ends up accessing a dangling pointer.
This especially affects probing during bootup. The MDIO bus and PHY
registration may succeed, but registration with the DSA framework
may fail later on (e.g. because the CPU port depends on another,
very slow device that isn't done probing yet, returning -EPROBE_DEFER).
In this case, probe() fails, but the MDIO subsystem may already have
accessed the MIDO bus or PHYs, arming the timer.
This is fixed as follows:
- If probe fails after mv88e6xxx_phy_init(), make sure we also call
mv88e6xxx_phy_destroy() before returning
- In mv88e6xxx_remove(), make sure we do the teardown in the correct
order, calling mv88e6xxx_phy_destroy() after unregistering the
switch device.
- In mv88e6xxx_phy_destroy(), destroy both the timer and the work item
that the timer might schedule, synchronously waiting in case one of
the callbacks already fired and destroying the timer first, before
waiting for the work item.
- Access to the PPU is guarded by a mutex, the worker acquires it
with a mutex_trylock(), not proceeding with the expensive shutdown
if that fails. We grab the mutex in mv88e6xxx_phy_destroy() to make
sure the slow PPU shutdown is already done or won't even enter, when
we wait for the work item.
Fixes: 2e5f032095 ("dsa: add support for the Marvell 88E6131 switch chip")
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20250401135705.92760-1-david.oberhollenzer@sigma-star.at
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9684407522 ]
Protect the parser TCAM/SRAM memory, and the cached (shadow) SRAM
information, from concurrent modifications.
Both the TCAM and SRAM tables are indirectly accessed by configuring
an index register that selects the row to read or write to. This means
that operations must be atomic in order to, e.g., avoid spreading
writes across multiple rows. Since the shadow SRAM array is used to
find free rows in the hardware table, it must also be protected in
order to avoid TOCTOU errors where multiple cores allocate the same
row.
This issue was detected in a situation where `mvpp2_set_rx_mode()` ran
concurrently on two CPUs. In this particular case the
MVPP2_PE_MAC_UC_PROMISCUOUS entry was corrupted, causing the
classifier unit to drop all incoming unicast - indicated by the
`rx_classifier_drops` counter.
Fixes: 3f518509de ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250401065855.3113635-1-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c9106f490 ]
With SRIOV enabled, idpf ends up calling into idpf_remove() twice.
First via idpf_shutdown() and then again when idpf_remove() calls into
sriov_disable(), because the VF devices use the idpf driver, hence the
same remove routine. When that happens, it is possible for the adapter
to be NULL from the first call to idpf_remove(), leading to a NULL
pointer dereference.
echo 1 > /sys/class/net/<netif>/device/sriov_numvfs
reboot
BUG: kernel NULL pointer dereference, address: 0000000000000020
...
RIP: 0010:idpf_remove+0x22/0x1f0 [idpf]
...
? idpf_remove+0x22/0x1f0 [idpf]
? idpf_remove+0x1e4/0x1f0 [idpf]
pci_device_remove+0x3f/0xb0
device_release_driver_internal+0x19f/0x200
pci_stop_bus_device+0x6d/0x90
pci_stop_and_remove_bus_device+0x12/0x20
pci_iov_remove_virtfn+0xbe/0x120
sriov_disable+0x34/0xe0
idpf_sriov_configure+0x58/0x140 [idpf]
idpf_remove+0x1b9/0x1f0 [idpf]
idpf_shutdown+0x12/0x30 [idpf]
pci_device_shutdown+0x35/0x60
device_shutdown+0x156/0x200
...
Replace the direct idpf_remove() call in idpf_shutdown() with
idpf_vc_core_deinit() and idpf_deinit_dflt_mbx(), which perform
the bulk of the cleanup, such as stopping the init task, freeing IRQs,
destroying the vports and freeing the mailbox. This avoids the calls to
sriov_disable() in addition to a small netdev cleanup, and destroying
workqueues, which don't seem to be required on shutdown.
Reported-by: Yuying Ma <yuma@redhat.com>
Fixes: e850efed5e ("idpf: add module register and probe functionality")
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efaaf344bc ]
Starting from Meteor Lake, the Kumeran interface between the integrated
MAC and the I219 PHY works at a different frequency. This causes sporadic
MDI errors when accessing the PHY, and in rare circumstances could lead
to packet corruption.
To overcome this, introduce minor changes to the Kumeran idle
state (K1) parameters during device initialization. Hardware reset
reverts this configuration, therefore it needs to be applied in a few
places.
Fixes: cc23f4f0b6 ("e1000e: Add support for Meteor Lake")
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c34424eb3b ]
Make NET_DSA_REALTEK_RTL8366RB_LEDS a hidden symbol.
It seems very unlikely user would want to intentionally
disable it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250228004534.3428681-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c3170628a ]
After commit 92cadedd9d ("brcmfmac: Avoid keeping power to SDIO card
unless WOWL is used"), the wifi adapter by default is turned off on
suspend and then re-probed on resume.
This conflicts with some embedded boards that require to remain powered.
They will fail on resume with:
brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
ieee80211 phy1: brcmf_bus_started: failed: -110
ieee80211 phy1: brcmf_attach: dongle is not responding: err=-110
brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed
This commit checks for the Device Tree property 'cap-power-off-cards'.
If this property is not set, it means that we do not have the capability
to power off and should therefore remain powered.
Signed-off-by: Matthias Proske <email@matthias-proske.de>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250212185941.146958-2-email@matthias-proske.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a03e2082e6 ]
The firmware uses the newer version of the API in recent devices. For
older devices, we translate the rate to the new format.
Don't parse the rate with old parsing macros.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250209143303.13d70cdcbb4e.Ic92193bce4013b70a823cfef250ee79c16cf7c17@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7774e39200 ]
The firmware dumps can be pretty big, and since we use single
pages for each SG table entry, even the table itself may end
up being an order-5 allocation. Build chained tables so that
we need not allocate a higher-order table here.
This could be improved and cleaned up, e.g. by using the SG
pool code or simply kvmalloc(), but all of that would require
also updating the devcoredump first since that frees it all,
so we need to be more careful. SG pool might also run against
the CONFIG_ARCH_NO_SG_CHAIN limitation, which is irrelevant
here.
Also use _devcd_free_sgtable() for the error paths now, much
simpler especially since it's in two places now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250209143303.697c7a465ac9.Iea982df46b5c075bfb77ade36f187d99a70c63db@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 323d6db6dc ]
Due to the incorrect initial vector number in
rvu_nix_unregister_interrupts(), NIX_AF_INT_VEC_GEN is not
geeting free. Fix the vector number to include NIX_AF_INT_VEC_GEN
irq.
Fixes: 5ed66306ea ("octeontx2-af: Add devlink health reporters for NIX")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250327094054.2312-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fdba88a21 ]
When number of RVU VFs > 64, the vfs value passed to "rvu_queue_work"
function is incorrect. Due to which mbox workqueue entries for
VFs 0 to 63 never gets added to workqueue.
Fixes: 9bdc47a6e3 ("octeontx2-af: Mbox communication support btw AF and it's VFs")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250327091441.1284-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f1eaabb4b ]
Correct detect condition is applied to the entire 5221 family of PHYs.
Fixes: 3abbd0699b ("net: phy: broadcom: add support for BCM5221 phy")
Signed-off-by: Jim Liu <jim.t90615@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fab0583568 ]
When hw-gro is enabled, the maximum number of header entries that are
needed per wqe (hd_per_wqe) is calculated based on the size of the
reservations among other parameters.
Miscalculation of the size of reservations leads to incorrect
calculation of hd_per_wqe as 0, particularly in the case of large page
size like in aarch64, this prevents the SHAMPO header from being
correctly initialized in the device, ultimately causing the following
cqe err that indicates a violation of PD.
mlx5_core 0000:00:08.0 eth2: ERR CQE on RQ: 0x1180
mlx5_core 0000:00:08.0 eth2: Error cqe on cqn 0x510, ci 0x0, qn 0x1180, opcode 0xe, syndrome 0x4, vendor syndrome 0x32
00000000: 00 00 00 00 04 4a 00 00 00 00 00 00 20 00 93 32
00000010: 55 00 00 00 fb cc 00 00 00 00 00 00 07 18 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4a
00000030: 00 00 00 9a 93 00 32 04 00 00 00 00 00 00 da e1
Use the correct formula for calculating the size of reservations,
precisely it shouldn't be dependent on page size, instead use the
correct multiply of MLX5E_SHAMPO_WQ_BASE_RESRV_SIZE.
Fixes: e5ca8fb08a ("net/mlx5e: Add control path for SHAMPO feature")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1742732906-166564-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67d1a8956d ]
Set FLAG_WWAN instead of FLAG_ETHERNET for RNDIS interfaces on Mobile
Broadband Modems, as opposed to regular Ethernet adapters.
Otherwise NetworkManager gets confused, misjudges the device type,
and wouldn't know it should connect a modem to get the device to work.
What would be the result depends on ModemManager version -- older
ModemManager would end up disconnecting a device after an unsuccessful
probe attempt (if it connected without needing to unlock a SIM), while
a newer one might spawn a separate PPP connection over a tty interface
instead, resulting in a general confusion and no end of chaos.
The only way to get this work reliably is to fix the device type
and have good enough version ModemManager (or equivalent).
Fixes: 63ba395cd7 ("rndis_host: support Novatel Verizon USB730L")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://patch.msgid.link/20250325095842.1567999-1-lkundrak@v3.sk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2ea396448f upstream.
commit 8a7d12d674 ("net: usb: usbnet: fix name regression") assumed
that local addresses always came from the kernel, but some devices hand
out local mac addresses so we ended up with point-to-point devices with
a mac set by the driver, renaming to eth%d when they used to be named
usb%d.
Userspace should not rely on device name, but for the sake of stability
restore the local mac address check portion of the naming exception:
point to point devices which either have no mac set by the driver or
have a local mac handed out by the driver will keep the usb%d name.
(some USB LTE modems are known to hand out a stable mac from the locally
administered range; that mac appears to be random (different for
mulitple devices) and can be reset with device-specific commands, so
while such devices would benefit from getting a OUI reserved, we have
to deal with these and might as well preserve the existing behavior
to avoid breaking fragile openwrt configurations and such on upgrade.)
Link: https://lkml.kernel.org/r/20241203130457.904325-1-asmadeus@codewreck.org
Fixes: 8a7d12d674 ("net: usb: usbnet: fix name regression")
Cc: stable@vger.kernel.org
Tested-by: Ahmed Naseef <naseefkm@gmail.com>
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20250326-usbnet_rename-v2-1-57eb21fcff26@atmark-techno.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a19143124 upstream.
During system PM, if no wakeup requirement, disable transceiver to
save power.
Fixes: 4de349e786 ("can: flexcan: fix resume function")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20250314110145.899179-2-haibo.chen@nxp.com
[mkl: add newlines]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd99d6ed20 upstream.
After a suspend/resume cycle on a down interface, it will come up as
ERROR-ACTIVE.
$ ip -details -s -s a s dev flexcan0
3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10
link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0
can state STOPPED (berr-counter tx 0 rx 0) restart-ms 1000
$ sudo systemctl suspend
$ ip -details -s -s a s dev flexcan0
3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10
link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0
can state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 1000
And only set CAN state to CAN_STATE_ERROR_ACTIVE when resume process
has no issue, otherwise keep in CAN_STATE_SLEEPING as suspend did.
Fixes: 4de349e786 ("can: flexcan: fix resume function")
Cc: stable@vger.kernel.org
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20250314110145.899179-1-haibo.chen@nxp.com
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Closes: https://lore.kernel.org/all/20250314-married-polar-elephant-b15594-mkl@pengutronix.de
[mkl: add newlines]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
