[ Upstream commit a374f28700 ]
Commit 3f66425a4f ("cpufreq: Enable COMPILE_TEST on Arm drivers")
enabled compile testing of most Arm CPUFreq drivers but left the
existing default values unchanged so that many drivers are enabled by
default whenever COMPILE_TEST is selected.
This specifically results in the S3C64XX CPUFreq driver being enabled
and initialised during boot of non-S3C64XX platforms with the following
error logged:
cpufreq: Unable to obtain ARMCLK: -2
Commit d4f610a9ba ("cpufreq: Do not enable by default during compile
testing") recently fixed most of the default values, but two entries
were missed and two could use a more specific default condition.
Fix the default values for drivers that can be compile tested and that
should be enabled by default when not compile testing.
Fixes: 3f66425a4f ("cpufreq: Enable COMPILE_TEST on Arm drivers")
Cc: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4f610a9ba ]
Enabling the compile test should not cause automatic enabling of all
drivers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Stable-dep-of: a374f28700 ("cpufreq: fix compile-test defaults")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b8e6b5888 ]
Returning a negative error code in a function with an unsigned
return type is a pretty bad idea. It is probably worse when the
justification for the change is "our static analisys tool found it".
Fixes: cf7de25878 ("cppc_cpufreq: Fix possible null pointer dereference")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73b24dc731 ]
cpufreq_cpu_get_raw() can return NULL when the target CPU is not present
in the policy->cpus mask. scpi_cpufreq_get_rate() does not check for
this case, which results in a NULL pointer dereference.
Fixes: 343a8d17fa ("cpufreq: scpi: remove arm_big_little dependency")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 484d3f15cc ]
cpufreq_cpu_get_raw() can return NULL when the target CPU is not present
in the policy->cpus mask. scmi_cpufreq_get_rate() does not check for
this case, which results in a NULL pointer dereference.
Add NULL check after cpufreq_cpu_get_raw() to prevent this issue.
Fixes: 99d6bdf338 ("cpufreq: add support for CPU DVFS based on SCMI message protocol")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9992649f67 ]
cpufreq_cpu_get_raw() can return NULL when the target CPU is not present
in the policy->cpus mask. apple_soc_cpufreq_get_rate() does not check
for this case, which results in a NULL pointer dereference.
Fixes: 6286bbb405 ("cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14c8a41815 ]
A KASAN enabled kernel reports an out-of-bounds access when handling the
nvmem cell in the sun50i cpufreq driver:
==================================================================
BUG: KASAN: slab-out-of-bounds in sun50i_cpufreq_nvmem_probe+0x180/0x3d4
Read of size 4 at addr ffff000006bf31e0 by task kworker/u16:1/38
This is because the DT specifies the nvmem cell as covering only two
bytes, but we use a u32 pointer to read the value. DTs for other SoCs
indeed specify 4 bytes, so we cannot just shorten the variable to a u16.
Fortunately nvmem_cell_read() allows to return the length of the nvmem
cell, in bytes, so we can use that information to only access the valid
portion of the data.
To cover multiple cell sizes, use memcpy() to copy the information into a
zeroed u32 buffer, then also make sure we always read the data in little
endian fashion, as this is how the data is stored in the SID efuses.
Fixes: 6cc4bcceff ("cpufreq: sun50i: Refactor speed bin decoding")
Reported-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Škrabec <jernej.skrabec@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9e4e249018 upstream.
Since acpi_processor_notify() can be called before registering a cpufreq
driver or even in cases when a cpufreq driver is not registered at all,
cpufreq_update_limits() needs to check if a cpufreq driver is present
and prevent it from being unregistered.
For this purpose, make it call cpufreq_cpu_get() to obtain a cpufreq
policy pointer for the given CPU and reference count the corresponding
policy object, if present.
Fixes: 5a25e3f7cc ("cpufreq: intel_pstate: Driver-specific handling of _PPC updates")
Closes: https://lore.kernel.org/linux-acpi/Z-ShAR59cTow0KcR@mail-itl
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/1928789.tdWV9SEqCh@rjwysocki.net
[do not use __free(cpufreq_cpu_put) in a backport]
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4a1e3bf61f ]
Support was added for Tegra234 in the referenced commit, but the Kconfig
was not updated to allow building for the arch.
Fixes: 273bc890a2 ("cpufreq: tegra194: Add support for Tegra234")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3698dd6b13 ]
We observed an issue that the CPU frequency can't raise up with a 100% CPU
load when NOHZ is off and the 'conservative' governor is selected.
'idle_time' can be negative if it's obtained from get_cpu_idle_time_jiffy()
when NOHZ is off. This was found and explained in commit 9485e4ca0b
("cpufreq: governor: Fix handling of special cases in dbs_update()").
However, commit 7592019634 ("cpufreq: governors: Fix long idle detection
logic in load calculation") introduced a comparison between 'idle_time' and
'samling_rate' to detect a long idle interval. While 'idle_time' is
converted to int before comparison, it's actually promoted to unsigned
again when compared with an unsigned 'sampling_rate'. Hence, this leads to
wrong idle interval detection when it's in fact 100% busy and sets
policy_dbs->idle_periods to a very large value. 'conservative' adjusts the
frequency to minimum because of the large 'idle_periods', such that the
frequency can't raise up. 'Ondemand' doesn't use policy_dbs->idle_periods
so it fortunately avoids the issue.
Correct negative 'idle_time' to 0 before any use of it in dbs_update().
Fixes: 7592019634 ("cpufreq: governors: Fix long idle detection logic in load calculation")
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Link: https://patch.msgid.link/20250213035510.2402076-1-zhanjie9@hisilicon.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4742da9774 ]
The CPU rate from clk_get_rate() may not be divisible by 1000
(e.g., 133333333). But the rate calculated from frequency(kHz) is
always divisible by 1000 (e.g., 133333000).
Comparing the rate causes a warning during CPU scaling:
"cpufreq: __target_index: Failed to change cpu frequency: -5".
When we choose to compare kHz here, the issue does not occur.
Fixes: 343a8d17fa ("cpufreq: scpi: remove arm_big_little dependency")
Signed-off-by: zuoqian <zuoqian113@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d364eee14c upstream.
Scope based guard/cleanup macros should not be used together with goto
labels. Hence, remove the goto label.
Fixes: 6c093d5a5b ("cpufreq/amd-pstate: convert mutex use to guard()")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-2-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 53ec2101df ]
amd_pstate_epp_offline() is only called from within
amd_pstate_epp_cpu_offline() and doesn't make much sense to have it at all.
Hence, remove it.
Also remove the unncessary debug print in the offline path while at it.
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241204144842.164178-6-Dhananjay.Ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Stable-dep-of: 3ace20038e ("cpufreq/amd-pstate: Fix cpufreq_policy ref counting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6960e6b1b ]
Set min_perf to lowest_perf for shared memory systems, similar to the MSR
based systems.
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20241023102108.5980-5-Dhananjay.Ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Stable-dep-of: 3ace20038e ("cpufreq/amd-pstate: Fix cpufreq_policy ref counting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 796ff50e12 ]
The EPP value being set in perf_ctrls.energy_perf is not being propagated
to the shared memory, fix that.
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20241023102108.5980-4-Dhananjay.Ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Stable-dep-of: 3ace20038e ("cpufreq/amd-pstate: Fix cpufreq_policy ref counting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 43855ac614 upstream.
The driver generates following warning when regulator support isn't
enabled in the kernel. Fix it.
drivers/cpufreq/s3c64xx-cpufreq.c: In function 's3c64xx_cpufreq_set_target':
>> drivers/cpufreq/s3c64xx-cpufreq.c:55:22: warning: variable 'old_freq' set but not used [-Wunused-but-set-variable]
55 | unsigned int old_freq, new_freq;
| ^~~~~~~~
>> drivers/cpufreq/s3c64xx-cpufreq.c:54:30: warning: variable 'dvfs' set but not used [-Wunused-but-set-variable]
54 | struct s3c64xx_dvfs *dvfs;
| ^~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501191803.CtfT7b2o-lkp@intel.com/
Cc: 5.4+ <stable@vger.kernel.org> # v5.4+
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/236b227e929e5adc04d1e9e7af6845a46c8e9432.1737525916.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1f010c9d9 upstream.
This driver can be built as a module since commit 3b062a0869 ("cpufreq:
dt-platdev: Support building as module"), but unfortunately this caused
a regression because the cputfreq-dt-platdev.ko module does not autoload.
Usually, this is solved by just using the MODULE_DEVICE_TABLE() macro to
export all the device IDs as module aliases. But this driver is special
due how matches with devices and decides what platform supports.
There are two of_device_id lists, an allow list that are for CPU devices
that always match and a deny list that's for devices that must not match.
The driver registers a cpufreq-dt platform device for all the CPU device
nodes that either are in the allow list or contain an operating-points-v2
property and are not in the deny list.
Enforce builtin compile of cpufreq-dt-platdev to make autoload work.
Fixes: 3b062a0869 ("cpufreq: dt-platdev: Support building as module")
Link: https://lore.kernel.org/all/20241104201424.2a42efdd@akair/
Link: https://lore.kernel.org/all/20241119111918.1732531-1-javierm@redhat.com/
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reported-by: Radu Rendec <rrendec@redhat.com>
Reported-by: Javier Martinez Canillas <javierm@redhat.com>
[ Viresh: Picked commit log from Javier, updated tags ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0834667545 ]
Commit 3c55e94c0a ("cpufreq: ACPI: Extend frequency tables to cover
boost frequencies") introduced an assumption in acpi_cpufreq_cpu_init()
that the first entry in the P-state table was the nominal frequency.
This assumption is incorrect. The frequency corresponding to the P0
P-State need not be the same as the nominal frequency advertised via
CPPC.
Since the driver is using the CPPC.highest_perf and CPPC.nominal_perf
to compute the boost-ratio, it makes sense to use CPPC.nominal_freq to
compute the max-frequency. CPPC.nominal_freq is advertised on
platforms supporting CPPC revisions 3 or higher.
Hence, fallback to using the first entry in the P-State table only on
platforms that do not advertise CPPC.nominal_freq.
Fixes: 3c55e94c0a ("cpufreq: ACPI: Extend frequency tables to cover boost frequencies")
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250113044107.566-1-gautham.shenoy@amd.com
[ rjw: Retain reverse X-mas tree ordering of local variable declarations ]
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9ba290d0b ]
determine_rate() callback is used by the clk_set_rate() API to get the
closest rate of the target rate supported by the clock. If this callback
is not implemented (nor round_rate() callback), then the API will assume
that the clock cannot set the requested rate. And since there is no parent,
it will return -EINVAL.
This is not an issue right now as clk_set_rate() mistakenly compares the
target rate with cached rate and bails out early. But once that is fixed
to compare the target rate with the actual rate of the clock (returned by
recalc_rate()), then clk_set_rate() for this clock will start to fail as
below:
cpu cpu0: _opp_config_clk_single: failed to set clock rate: -22
So implement the determine_rate() callback that just returns the actual
rate at which the clock is passed to the CPUs in a domain.
Fixes: 4370232c72 ("cpufreq: qcom-hw: Add CPU clock provider support")
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85d8b11351 ]
Currently, qcom_cpufreq_hw_recalc_rate() returns the LMh throttled
frequency for the domain even if LMh IRQ is not available. But as per
qcom_cpufreq_hw_get(), the driver has to query LUT entries to get the
actual frequency of the domain. So do the same in
qcom_cpufreq_hw_recalc_rate().
While doing so, refactor the existing qcom_cpufreq_hw_get() function so
that qcom_cpufreq_hw_recalc_rate() can make use of the existing code and
avoid code duplication. This also requires setting the
qcom_cpufreq_data::policy even if LMh IRQ is not available.
Fixes: 4370232c72 ("cpufreq: qcom-hw: Add CPU clock provider support")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e265fc046 ]
It is possible to enable few cpufreq drivers, without the framework
being enabled. This happened due to a bug while moving the entries
earlier. Fix it.
Fixes: 7ee1378736 ("cpufreq: Move CPPC configs to common Kconfig and add RISC-V")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/84ac7a8fa72a8fe20487bb0a350a758bce060965.1736488384.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 172bf5ed04 upstream.
mtk_cpufreq_get_cpu_power() return 0 if the policy is NULL. Then in
em_create_perf_table(), the later zero check for power is not invalid
as power is uninitialized. As Lukasz suggested, it must return -EINVAL when
the 'policy' is not found. So return -EINVAL to fix it.
Cc: stable@vger.kernel.org
Fixes: 4855e26bcf ("cpufreq: mediatek-hw: Add support for CPUFREQ HW")
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Suggested-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b51eb0874d ]
cppc_get_cpu_power() return 0 if the policy is NULL. Then in
em_create_perf_table(), the later zero check for power is not valid
as power is uninitialized. As Quentin pointed out, kernel energy model
core check the return value of active_power() first, so if the callback
failed it should tell the core. So return -EINVAL to fix it.
Fixes: a78e720756 ("cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw()")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be392aa80f ]
cppc_get_cpu_cost() return 0 if the policy is NULL. Then in
em_compute_costs(), the later zero check for cost is not valid
as cost is uninitialized. As Quentin pointed out, kernel energy model
core check the return value of get_cost() first, so if the callback
failed it should tell the core. Return -EINVAL to fix it.
Fixes: 1a1374bb8c ("cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost()")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/c4765377-7830-44c2-84fa-706b6e304e10@stanley.mountain/
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db01e46689 ]
Even if it's not critical, the avoidance of checking the error code
from devm_mutex_init() call today diminishes the point of using devm
variant of it. Tomorrow it may even leak something. Add the missed
check.
Fixes: ccf5145414 ("cpufreq: Add Loongson-3 CPUFreq driver support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a1374bb8c ]
cpufreq_cpu_get_raw() may return NULL if the cpu is not in
policy->cpus cpu mask and it will cause null pointer dereference,
so check NULL for cppc_get_cpu_cost().
Fixes: 740fcdc2c2 ("cpufreq: CPPC: Register EM based on efficiency class information")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a78e720756 ]
cpufreq_cpu_get_raw() may return NULL if the cpu is not in
policy->cpus cpu mask and it will cause null pointer dereference.
Fixes: 740fcdc2c2 ("cpufreq: CPPC: Register EM based on efficiency class information")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c471956319 ]
The CPPC performance feedback counters could be 0 or unchanged when the
target cpu is in a low-power idle state, e.g. power-gated or clock-gated.
When the counters are 0, cppc_cpufreq_get_rate() returns 0 KHz, which makes
cpufreq_online() get a false error and fail to generate a cpufreq policy.
When the counters are unchanged, the existing cppc_perf_from_fbctrs()
returns a cached desired perf, but some platforms may update the real
frequency back to the desired perf reg.
For the above cases in cppc_cpufreq_get_rate(), get the latest desired perf
from the CPPC reg to reflect the frequency because some platforms may
update the actual frequency back there; if failed, use the cached desired
perf.
Fixes: 6a4fec4f6d ("cpufreq: cppc: cppc_cpufreq_get_rate() returns zero in all error cases.")
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c411b39e4 ]
The amd-pstate driver sets CPPC_REQ.min_perf to CPPC_REQ.max_perf when
in active mode with performance governor. Typically CPPC_REQ.max_perf
is set to CPPC.highest_perf. This causes frequency throttling on
power-limited platforms which causes performance regressions on
certain classes of workloads.
Hence, set the CPPC_REQ.min_perf to the CPPC.nominal_perf or
CPPC_REQ.max_perf, whichever is lower of the two.
Fixes: ffa5096a7c ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241021101836.9047-2-gautham.shenoy@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67c08d303e ]
When boost is changed the CPPC value is changed in amd_pstate_cpu_boost_update()
but then changed again when refresh_frequency_limits() and all it's callbacks
occur. The first is a pointless write, so instead just update the limits for
the policy and let the policy refresh anchor everything properly.
Fixes: c8c68c38b5 ("cpufreq: amd-pstate: initialize core precision boost state")
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Tested-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Link: https://lore.kernel.org/r/20241012174519.897-2-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Notice that hybrid_init_cpu_capacity_scaling() only needs to hold
hybrid_capacity_lock around __hybrid_init_cpu_capacity_scaling()
calls, so introduce a "locked" wrapper around the latter and call
it from the former. This allows to drop a local variable and a
label that are not needed any more.
Also, rename __hybrid_init_cpu_capacity_scaling() to
__hybrid_refresh_cpu_capacity_scaling() for consistency.
Interestingly enough, this fixes a locking issue introduced by commit
929ebc93cc ("cpufreq: intel_pstate: Set asymmetric CPU capacity on
hybrid systems") that put an arch_enable_hybrid_capacity_scale() call
under hybrid_capacity_lock, which was a mistake because the latter is
acquired in CPU hotplug paths and so it cannot be held around
cpus_read_lock() calls.
Link: https://lore.kernel.org/linux-pm/SJ1PR11MB6129EDBF22F8A90FC3A3EDC8B9582@SJ1PR11MB6129.namprd11.prod.outlook.com/
Fixes: 929ebc93cc ("cpufreq: intel_pstate: Set asymmetric CPU capacity on hybrid systems")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/12554508.O9o76ZdvQC@rjwysocki.net
[ rjw: Changelog update ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 929ebc93cc ("cpufreq: intel_pstate: Set asymmetric CPU
capacity on hybrid systems") overlooked a corner case in which some
CPUs may be offline to start with and brought back online later,
after the intel_pstate driver has been registered, so their asymmetric
capacity will not be set.
Address this by calling hybrid_update_capacity() in the CPU
initialization path that is executed instead of the online path
for those CPUs.
Note that this asymmetric capacity update will be skipped during
driver initialization and mode switches because hybrid_max_perf_cpu
is NULL in those cases.
Fixes: 929ebc93cc ("cpufreq: intel_pstate: Set asymmetric CPU capacity on hybrid systems")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1913414.tdWV9SEqCh@rjwysocki.net
Modify intel_pstate_register_driver() to clear hybrid_max_perf_cpu
before calling cpufreq_register_driver(), so that asymmetric CPU
capacity scaling is not updated until hybrid_init_cpu_capacity_scaling()
runs down the road. This is done in preparation for a subsequent
change adding asymmetric CPU capacity computation to the CPU init path
to handle CPUs that are initially offline.
The information on whether or not hybrid_max_perf_cpu was NULL before
it has been cleared is passed to hybrid_init_cpu_capacity_scaling(),
so full initialization of CPU capacity scaling can be skipped if it
has been carried out already.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4616631.LvFx2qVVIh@rjwysocki.net
When boost has been disabled the limit for perf should be nominal perf not
the highest perf. Using the latter to do calculations will lead to
incorrect values that are still above nominal.
Fixes: ad4caad58d ("cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()")
Reported-by: Peter Jung <ptr1337@cachyos.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219348
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Link: https://lore.kernel.org/r/20241012174519.897-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
While switching the driver mode between active and passive, Collaborative
Processor Performance Control (CPPC) is disabled in
amd_pstate_unregister_driver(). But, it is not enabled back while registering
the new driver (passive or active). This leads to the new driver mode not
working correctly, so enable it back in amd_pstate_register_driver().
Fixes: 3ca7bc818d ("cpufreq: amd-pstate: Add guided mode control support via sysfs")
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241004122303.94283-1-Dhananjay.Ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
- Fix CPU device node reference counting in the cpufreq core (Miquel
Sabaté Solà).
- Turn the spinlock used by the intel_pstate driver in hard IRQ
context into a raw one to prevent the driver from crashing when
PREEMPT_RT is enabled (Uwe Kleine-König).
-----BEGIN PGP SIGNATURE-----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=mgVf
-----END PGP SIGNATURE-----
Merge tag 'pm-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two cpufreq issues, one in the core and one in the
intel_pstate driver:
- Fix CPU device node reference counting in the cpufreq core (Miquel
Sabaté Solà)
- Turn the spinlock used by the intel_pstate driver in hard IRQ
context into a raw one to prevent the driver from crashing when
PREEMPT_RT is enabled (Uwe Kleine-König)"
* tag 'pm-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Avoid a bad reference count on CPU node
cpufreq: intel_pstate: Make hwp_notify_lock a raw spinlock
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
notify_hwp_interrupt() is called via sysvec_thermal() ->
smp_thermal_vector() -> intel_thermal_interrupt() in hard irq context.
For this reason it must not use a simple spin_lock that sleeps with
PREEMPT_RT enabled. So convert it to a raw spinlock.
Reported-by: xiao sheng wen <atzlinux@sina.com>
Link: https://bugs.debian.org/1076483
Signed-off-by: Uwe Kleine-König <ukleinek@debian.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: xiao sheng wen <atzlinux@sina.com>
Link: https://patch.msgid.link/20240919081121.10784-2-ukleinek@debian.org
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Implement the SCHED_DEADLINE server infrastructure - Daniel Bristot de Oliveira's
last major contribution to the kernel:
"SCHED_DEADLINE servers can help fixing starvation issues of low priority
tasks (e.g., SCHED_OTHER) when higher priority tasks monopolize CPU
cycles. Today we have RT Throttling; DEADLINE servers should be able to
replace and improve that."
(Daniel Bristot de Oliveira, Peter Zijlstra, Joel Fernandes,
Youssef Esmat, Huang Shijie)
- Preparatory changes for sched_ext integration:
- Use set_next_task(.first) where required
- Fix up set_next_task() implementations
- Clean up DL server vs. core sched
- Split up put_prev_task_balance()
- Rework pick_next_task()
- Combine the last put_prev_task() and the first set_next_task()
- Rework dl_server
- Add put_prev_task(.next)
(Peter Zijlstra, with a fix by Tejun Heo)
- Complete the EEVDF transition and refine EEVDF scheduling:
- Implement delayed dequeue
- Allow shorter slices to wakeup-preempt
- Use sched_attr::sched_runtime to set request/slice suggestion
- Document the new feature flags
- Remove unused and duplicate-functionality fields
- Simplify & unify pick_next_task_fair()
- Misc debuggability enhancements
(Peter Zijlstra, with fixes/cleanups by Dietmar Eggemann,
Valentin Schneider and Chuyi Zhou)
- Initialize the vruntime of a new task when it is first enqueued,
resulting in significant decrease in latency of newly woken tasks.
(Zhang Qiao)
- Introduce SM_IDLE and an idle re-entry fast-path in __schedule()
(K Prateek Nayak, Peter Zijlstra)
- Clean up and clarify the usage of Clean up usage of rt_task()
(Qais Yousef)
- Preempt SCHED_IDLE entities in strict cgroup hierarchies
(Tianchen Ding)
- Clarify the documentation of time units for deadline scheduler
parameters. (Christian Loehle)
- Remove the HZ_BW chicken-bit feature flag introduced a year ago,
the original change seems to be working fine.
(Phil Auld)
- Misc fixes and cleanups (Chen Yu, Dan Carpenter, Huang Shijie,
Peilin He, Qais Yousefm and Vincent Guittot)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TEC6
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2024-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Implement the SCHED_DEADLINE server infrastructure - Daniel Bristot
de Oliveira's last major contribution to the kernel:
"SCHED_DEADLINE servers can help fixing starvation issues of low
priority tasks (e.g., SCHED_OTHER) when higher priority tasks
monopolize CPU cycles. Today we have RT Throttling; DEADLINE
servers should be able to replace and improve that."
(Daniel Bristot de Oliveira, Peter Zijlstra, Joel Fernandes, Youssef
Esmat, Huang Shijie)
- Preparatory changes for sched_ext integration:
- Use set_next_task(.first) where required
- Fix up set_next_task() implementations
- Clean up DL server vs. core sched
- Split up put_prev_task_balance()
- Rework pick_next_task()
- Combine the last put_prev_task() and the first set_next_task()
- Rework dl_server
- Add put_prev_task(.next)
(Peter Zijlstra, with a fix by Tejun Heo)
- Complete the EEVDF transition and refine EEVDF scheduling:
- Implement delayed dequeue
- Allow shorter slices to wakeup-preempt
- Use sched_attr::sched_runtime to set request/slice suggestion
- Document the new feature flags
- Remove unused and duplicate-functionality fields
- Simplify & unify pick_next_task_fair()
- Misc debuggability enhancements
(Peter Zijlstra, with fixes/cleanups by Dietmar Eggemann, Valentin
Schneider and Chuyi Zhou)
- Initialize the vruntime of a new task when it is first enqueued,
resulting in significant decrease in latency of newly woken tasks
(Zhang Qiao)
- Introduce SM_IDLE and an idle re-entry fast-path in __schedule()
(K Prateek Nayak, Peter Zijlstra)
- Clean up and clarify the usage of Clean up usage of rt_task()
(Qais Yousef)
- Preempt SCHED_IDLE entities in strict cgroup hierarchies
(Tianchen Ding)
- Clarify the documentation of time units for deadline scheduler
parameters (Christian Loehle)
- Remove the HZ_BW chicken-bit feature flag introduced a year ago,
the original change seems to be working fine (Phil Auld)
- Misc fixes and cleanups (Chen Yu, Dan Carpenter, Huang Shijie,
Peilin He, Qais Yousefm and Vincent Guittot)
* tag 'sched-core-2024-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
sched/cpufreq: Use NSEC_PER_MSEC for deadline task
cpufreq/cppc: Use NSEC_PER_MSEC for deadline task
sched/deadline: Clarify nanoseconds in uapi
sched/deadline: Convert schedtool example to chrt
sched/debug: Fix the runnable tasks output
sched: Fix sched_delayed vs sched_core
kernel/sched: Fix util_est accounting for DELAY_DEQUEUE
kthread: Fix task state in kthread worker if being frozen
sched/pelt: Use rq_clock_task() for hw_pressure
sched/fair: Move effective_cpu_util() and effective_cpu_util() in fair.c
sched/core: Introduce SM_IDLE and an idle re-entry fast-path in __schedule()
sched: Add put_prev_task(.next)
sched: Rework dl_server
sched: Combine the last put_prev_task() and the first set_next_task()
sched: Rework pick_next_task()
sched: Split up put_prev_task_balance()
sched: Clean up DL server vs core sched
sched: Fixup set_next_task() implementations
sched: Use set_next_task(.first) where required
sched/fair: Properly deactivate sched_delayed task upon class change
...
* Move the calculation of the AMD boost numerator outside of
amd-pstate, correcting acpi-cpufreq on systems with preferred cores
* Harden preferred core detection to avoid potential false positives
* Add extra unit test coverage for mode state machine
-----BEGIN PGP SIGNATURE-----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=R4HZ
-----END PGP SIGNATURE-----
Merge tag 'amd-pstate-v6.12-2024-09-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge the second round of amd-pstate changes for 6.12 from Mario
Limonciello:
"* Move the calculation of the AMD boost numerator outside of
amd-pstate, correcting acpi-cpufreq on systems with preferred cores
* Harden preferred core detection to avoid potential false positives
* Add extra unit test coverage for mode state machine"
* tag 'amd-pstate-v6.12-2024-09-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
cpufreq/amd-pstate-ut: Add test case for mode switches
cpufreq/amd-pstate: Export symbols for changing modes
amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
x86/amd: Move amd_get_highest_perf() out of amd-pstate
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
ACPI: CPPC: Drop check for non zero perf ratio
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
Using uninitialized value "mode2" when calling "amd_pstate_get_mode_string".
Set "mode2" to "AMD_PSTATE_DISABLE" by default.
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Link: https://lore.kernel.org/r/20240910233923.46470-1-qianqiang.liu@163.com
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
There is a state machine in the amd-pstate driver utilized for
switches for all modes. To make sure that cleanup and setup works
properly for each mode add a unit test case that tries all
combinations.
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
In order to effectively test all mode switch combinations export
everything necessarily for amd-pstate-ut to trigger a mode switch.
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Don't take and release the mutex when prefcore isn't present and
avoid initialization of variables that will be initially set
in the function.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
